# Sample test pattern file, for use with Gimp-Print test pattern generator # Printer/driver settings. Please see src/ghost/README for appropriate # values for each of these settings # Printer model printer escp2-2200; mode extended 7; # Resolution, or print quality parameter Resolution 720sw; # Media source (if appropriate for your printer) #parameter InputSlot Standard; # Media type (what kind of paper) parameter MediaType Plain; # ink_type parameter InkType "CMYK"; # Paper size parameter PageSize Letter; # Dither algorithm parameter DitherAlgorithm Adaptive; # Note that due to limitations in the lexical analyzer and parser, all # floating point values must be specified with a decimal point. # Placement settings # Horizontal size, as fraction of paper width (defaults to 1.0) hsize 0.08; # Vertical size, as fraction of paper width (defaults to 1.0) vsize 0.08; # Left margin, as fraction of paper width (defaults to 0) left 0.0; # Top margin, as fraction of paper width (defaults to 0) top 0.0; # Output settings # These settings are used as the base values for all ramps. These settings # are multiplied by the appropriate values in each pattern definition # to compute the effective gamma and conversion values. All of these # default to 1.0. # Gamma value applied to all inks gamma 2.0; # Additional gamma correction applied to cyan, magenta, yellow, and black inks gamma cyan 1.0; gamma l_cyan 1.0; gamma magenta 1.0; gamma l_magenta 1.0; gamma yellow 1.0; gamma d_yellow 1.0; gamma black 1.0; # Amount of each ink that should be used when black is converted to CMY. # These values must be greater than 0 and must not exceed 10. level cyan 1.0; level magenta 1.0; level yellow 1.0; # Maximum amount of ink that will be printed, relative to solid coverage. # 1.0 means that every dot position that can be printed will be. Normally # at high resolutions less ink should be printed. This is similar to # density in normal RGB mode, but does not affect photo ink conversion. ink_limit 1.0; # Density. Unlike normal RGB mode, the CMYK16 input mode used by the # test pattern generator does not automatically scale the amount of ink # used by the resolution and paper type (see ink_limit above). The test # driver separates the functions of ink limiting and photo ink conversion # to allow maximum control over the output. density 1.0; # Do we want a thin black line between each band? (default yes) blackline 1; # Number of steps in each ramp (default 256) steps 256; # 0) White band pattern 0.0 0.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 ; # 1) C sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 ; # 2) M sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0; # 3) Y sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0; # 4) K sweep xpattern 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0; # 5) c sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0; # 6) m sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0; # 7) k sweep xpattern 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0; # 8) CM (blue) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.0 1.0; # 9) CY (green) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0; # 10) MY (red) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.5 1.0; # 11) cY (yellow-green) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0; # 12) cY (light green) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.75 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.25 1.0; # 13) mY (orange) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.5 1.0; # 14) mY (light red) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.75 1.0 0.0 0.25 1.0; # 15) cm (light blue) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0; # 16) CMY (gray) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.33 1.0 0.0 0.0 1.0 0.0 0.33 1.0 0.0 0.0 1.0 0.0 0.33 1.0; # 17) cmY sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.33 1.0 0.0 0.0 1.0 0.0 0.33 1.0 0.0 0.33 1.0; # 18) cmY (light gray) sweep xpattern 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.43 1.0 0.0 0.0 1.0 0.0 0.43 1.0 0.0 0.14 1.0; # 19) CMYK sweep xpattern 0.0 0.25 1.0 0.0 0.0 1.0 0.0 0.25 1.0 0.0 0.0 1.0 0.0 0.25 1.0 0.0 0.0 1.0 0.0 0.25 1.0; # 20) cmYk sweep xpattern 0.0 0.0 1.0 0.0 0.29 1.0 0.0 0.0 1.0 0.0 0.29 1.0 0.0 0.0 1.0 0.0 0.29 1.0 0.0 0.14 1.0; # 21) cmYK sweep xpattern 0.0 0.125 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.375 1.0 0.0 0.0 1.0 0.0 0.375 1.0 0.0 0.125 1.0;