# Sample test pattern file, for use with Gimp-Print test pattern generator

# Printer/driver settings. Please see src/ghost/README for appropriate
# values for each of these settings
# Printer model
printer escp2-2200;
mode extended 7;
# Resolution, or print quality
parameter Resolution 720sw;
# Media source (if appropriate for your printer)
#parameter InputSlot Standard;
# Media type (what kind of paper)
parameter MediaType Plain;
# ink_type
parameter InkType "CMYK";
# Paper size
parameter PageSize Letter;
# Dither algorithm
parameter DitherAlgorithm Adaptive;

# Note that due to limitations in the lexical analyzer and parser, all
# floating point values must be specified with a decimal point.

# Placement settings
# Horizontal size, as fraction of paper width (defaults to 1.0)
hsize 0.08;
# Vertical size, as fraction of paper width (defaults to 1.0)
vsize 0.08;
# Left margin, as fraction of paper width (defaults to 0)
left 0.0;
# Top margin, as fraction of paper width (defaults to 0)
top 0.0;

# Output settings
# These settings are used as the base values for all ramps.  These settings
# are multiplied by the appropriate values in each pattern definition
# to compute the effective gamma and conversion values.  All of these
# default to 1.0.
# Gamma value applied to all inks
gamma 2.0;
# Additional gamma correction applied to cyan, magenta, yellow, and black inks
gamma cyan 1.0;
gamma l_cyan 1.0;
gamma magenta 1.0;
gamma l_magenta 1.0;
gamma yellow 1.0;
gamma d_yellow 1.0;
gamma black 1.0;
# Amount of each ink that should be used when black is converted to CMY.
# These values must be greater than 0 and must not exceed 10.
level cyan 1.0;
level magenta 1.0;
level yellow 1.0;

# Maximum amount of ink that will be printed, relative to solid coverage.
# 1.0 means that every dot position that can be printed will be.  Normally
# at high resolutions less ink should be printed.  This is similar to
# density in normal RGB mode, but does not affect photo ink conversion.
ink_limit 1.0;

# Density.  Unlike normal RGB mode, the CMYK16 input mode used by the
# test pattern generator does not automatically scale the amount of ink
# used by the resolution and paper type (see ink_limit above).  The test
# driver separates the functions of ink limiting and photo ink conversion
# to allow maximum control over the output.
density 1.0;

# Do we want a thin black line between each band? (default yes)
blackline 1;

# Number of steps in each ramp (default 256)
steps 256;

#  0) White band
pattern 0.0 0.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0 ;
#  1) C sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 1.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0 ;
#  2) M sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 1.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0;
#  3) Y sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 1.0 1.0;
#  4) K sweep
xpattern 0.0 1.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0;
#  5) c sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 1.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0;
#  6) m sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 1.0 1.0  0.0 0.0 1.0;
#  7) k sweep
xpattern 0.0 0.0 1.0  0.0 1.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0;
#  8) CM (blue) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.0 1.0  0.0 0.0 1.0;
#  9) CY (green) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0;
#  10) MY (red) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.0 1.0  0.0 0.5 1.0;
#  11) cY (yellow-green) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0;
#  12) cY (light green) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.75 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.25 1.0;
#  13) mY (orange) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.5 1.0;
#  14) mY (light red) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.75 1.0  0.0 0.25 1.0;
#  15) cm (light blue) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.0 1.0  0.0 0.5 1.0  0.0 0.0 1.0;
#  16) CMY (gray) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.33 1.0  0.0 0.0 1.0  0.0 0.33 1.0  0.0 0.0 1.0  0.0 0.33 1.0;
#  17) cmY sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.33 1.0  0.0 0.0 1.0  0.0 0.33 1.0  0.0 0.33 1.0;
#  18) cmY (light gray) sweep
xpattern 0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.43 1.0  0.0 0.0 1.0  0.0 0.43 1.0  0.0 0.14 1.0;
#  19) CMYK sweep
xpattern 0.0 0.25 1.0  0.0 0.0 1.0  0.0 0.25 1.0  0.0 0.0 1.0  0.0 0.25 1.0  0.0 0.0 1.0  0.0 0.25 1.0;
#  20) cmYk sweep
xpattern 0.0 0.0 1.0  0.0 0.29 1.0  0.0 0.0 1.0  0.0 0.29 1.0  0.0 0.0 1.0  0.0 0.29 1.0  0.0 0.14 1.0;
#  21) cmYK sweep
xpattern 0.0 0.125 1.0  0.0 0.0 1.0  0.0 0.0 1.0  0.0 0.375 1.0  0.0 0.0 1.0  0.0 0.375 1.0  0.0 0.125 1.0;