#
# Mach Operating System
# Copyright (c) 1986 Carnegie-Mellon University
# All rights reserved. The CMU software License Agreement
# specifies the terms and conditions for use and redistribution.
#
#######################################################################
#
# Master machine independent configuration file.
#
# Specific configuration files are created based on this and
# the machine specific master file using the doconf script.
#
# Any changes to the master configuration files will affect all
# other configuration files based upon it.
#
#######################################################################
#
# To build a configuration, execute "doconf <configuration>."
# Configurations are specified in the "Configurations:" section
# of the MASTER and MASTER.* files as follows:
#
# <configuration> = [ <attribute0> <attribute1> ... <attributeN> ]
#
# Lines in the MASTER and MASTER.* files are selected based on
# the attribute selector list, found in a comment at the end of
# the line. This is a list of attributes separated by commas.
# The "!" operator selects the line if none of the attributes are
# specified.
#
# For example:
#
# <foo,bar> selects a line if "foo" or "bar" are specified.
# <!foo,bar> selects a line if neither "foo" nor "bar" is
# specified.
#
# Lines with no attributes specified are selected for all
# configurations.
#
#######################################################################
#
# STANDARD CONFIGURATION OPTIONS (select any combination)
#
# debug = extra kernel level debugging support
# mach = Mach support
#
# EXPERIMENTAL CONFIGURATION OPTIONS (select any combination, carefully)
#
# host = host resource control support
#
# MULTI-PROCESSOR CONFIGURATION (select at most one)
#
# multi16 = enable 16 multi-processors
# multi32 = enable 32 multi-processors
# multi48 = enable 48 multi-processors
#
# SYSTEM SIZE CONFIGURATION (select exactly one)
#
# xlarge = extra large scale system configuration
# large = large scale system configuration
# medium = medium scale system configuration
# small = small scale system configuration
# xsmall = extra small scale system configuration
# bsmall = special extra small scale system configuration
#
#######################################################################
#
# Standard Mach Research Configurations:
# -------- ---- -------- ---------------
#
# These are the default configurations that can be used by most sites.
# They are used internally by the Mach project.
#
# MACH = [mach multi16 medium debug]
#
#######################################################################
#
ident NeXT
# obsolete timezone spec
options TIMEZONE=0, PST=0
options QUOTA # # <quota>
options INET # # <inet>
options ABSOLUTETIME_SCALAR_TYPE
options NEW_VM_CODE # # <newvm>
options OLD_VM_CODE # # <!newvm>
options HW_AST # Hardware ast support # <hw_ast>
options HW_FOOTPRINT # Cache footprint support # <hw_foot>
options CONFIG_LCTX # Login Context
options MACH # Standard Mach features # <mach>
options MACH_ASSERT # Compile in assertions # <mach_assert>
options MACH_COMPAT # Vendor syscall compatibility # <mach>
options MACH_COUNTERS # counters # <count>
options MACH_DEBUG # IPC debugging interface # <mdebug>
options MACH_FASTLINK # Fast symbolic links
options MACH_FIXPRI # Fixed priority threads # <fixpri>
options MACH_HOST # Mach host (resource alloc.) # <host>
options MACH_IPC_COMPAT # Enable old IPC interface # <ipc_compat>
options MACH_IPC_DEBUG # Enable IPC debugging calls # <ipc_debug>
options MACH_IPC_TEST # Testing code/printfs # <ipc_test>
options MACH_LDEBUG # Sanity-check simple locking # <test>
options MACH_NP # Mach IPC support # <np>
options MACH_NBC # No buffer cache # <nbc>
options MACH_NET # Fast network access # <mach_net>
options MACH_XP # external pager support # <xp>
options NORMA_IPC # NORMA IPC support # <norma_ipc>
options NORMA_DEVICE # NORMA unified device names # <norma_device>
options NORMA_VM # NORMA virtual memory support # <norma_vm>
options NORMA_TASK # NORMA task support # <norma_task>
options NORMA_ETHER # NORMA across ethernet # <norma_ether>
options SIMPLE_CLOCK # don't assume fixed tick # <simple_clock>
options XPR_DEBUG # kernel tracing # <xpr_debug>
options KDEBUG # kernel tracing # <kdebug>
options DDM_DEBUG # driverkit-style tracing # <ddm_debug>
options MACH_OLD_VM_COPY # Old vm_copy technology # <!newvm>
options NO_DIRECT_RPC # for untyped mig servers #
options IPX # ipx stack # <ipx>
options EON # # <eon>
options ISO # ISO stack # <iso>
options LLC # 802.2 support # <llc>
options LOOP # loopback support # <loop>
options MROUTING # multicast routing # <mrouting>
options ROUTING # routing # <routing>
options NETMIBS # # <netmibs>
options VLAN # # <vlan>
options BOND # # <bond>
options PF # Packet Filter # <pf>
options PF_PKTHDR # PF tag inside mbuf pkthdr # <pf_pkthdr>
options PFLOG # PF log interface # <pflog>
options IPDIVERT # Divert sockets (for NAT) # <ipdivert>
options IPFLOW # IP fast forwarding # <ipflow>
options IPFIREWALL # IP Firewalling (used by NAT) # <ipfirewall>
options IPFIREWALL_FORWARD #Transparent proxy # <ipfirewall>
options IPFIREWALL_DEFAULT_TO_ACCEPT # allow everything by default # <ipfirewall>
options DUMMYNET # dummynet support # <dummynet>
options TRAFFIC_MGT # traffic management support # <traffic_mgt>
options IPFW2 # IP firewall (new version) # <ipfw2>
options MULTICAST # Internet Protocol Class-D $
options TCPDEBUG # TCP debug # <tcpdebug>
options RANDOM_IP_ID # random (not sequential) ip ids # <randomipid>
options TCP_DROP_SYNFIN # Drop TCP packets with SYN+FIN set # <tcpdrop_synfin>
options ICMP_BANDLIM # ICMP bandwidth limiting sysctl
options IFNET_INPUT_SANITY_CHK # allow dlil/ifnet input sanity check # <ifnet_input_chk>
options SYSV_SEM # SVID semaphores # <sysv_sem>
options SYSV_MSG # SVID messages # <sysv_msg>
options SYSV_SHM # SVID shared mem # <sysv_shm>
options PSYNCH # pthread synch # <psynch>
options PANIC_INFO # want kernel panic info # <panic_info>
options DEVELOPMENT # dev kernel # <development>
# secure_kernel - secure kernel from user programs
options SECURE_KERNEL # <secure_kernel>
options OLD_SEMWAIT_SIGNAL # old semwait_signal handler
#
# 4.4 general kernel
#
options SOCKETS # socket support # <inet, inet6, netat>
options DIAGNOSTIC # diagnostics # <diagnostic>
options CONFIG_DTRACE # dtrace support # <config_dtrace>
options GPROF # build profiling # <profile>
options SENDFILE # sendfile # <sendfile>
options NETWORKING # networking layer # <inet, inet6, netat>
options CONFIG_FSE # file system events # <config_fse>
options CONFIG_IMAGEBOOT # local image boot # <config_imageboot>
options CONFIG_SOWUPCALL # SB_UPCALL on sowwakeup # <config_sowupcall>
options CONFIG_MBUF_NOEXPAND # limit mbuf expansion # <config_mbuf_noexpand>
options CONFIG_MBUF_JUMBO # jumbo cluster pool # <config_mbuf_jumbo>
options CONFIG_MBUF_TAGS_MALLOC # use malloc for tags # <config_mbuf_tags_malloc>
options CONFIG_FORCE_OUT_IFP # Enable IP_FORCE_OUT_IFP # <config_force_out_ifp>
options CONFIG_IFEF_NOWINDOWSCALE # Scale TCP window per driver # <config_ifef_nowindowscale>
options CONFIG_WORKQUEUE # <config_workqueue>
#
# 4.4 filesystems
#
options FFS # Fast Filesystem Support # <ffs>
options HFS # HFS/HFS+ support # <hfs>
options FIFO # fifo support # <fifo>
options UNION # union_fs support # <union>
options FDESC # fdesc_fs support # <fdesc>
options DEVFS # devfs support # <devfs>
options JOURNALING # journaling support # <journaling>
options HFS_COMPRESSION # hfs compression # <hfs_compression>
#
# file system features
#
options QUOTA # file system quotas # <quota>
options REV_ENDIAN_FS # Reverse Endian FS # <revfs>
options NAMEDSTREAMS # named stream vnop support # <namedstreams>
options CONFIG_VOLFS # volfs path support (legacy) # <config_volfs>
#
# NFS support
#
options NFSCLIENT # Be an NFS client # <nfsclient>
options NFSSERVER # Be an NFS server # <nfsserver>
#
# AppleTalk Support
#
options NETAT # AppleTalk support # <netat>
#options AURP_SUPPORT # AppleTalk Update Routing # <netat>
#
# Machine Independent Apple Features
#
options KERNSERV # kernel_server intarface # <kernserv>
options MALLOCDEBUG # kernel malloc debugging # <mallocdebug>
options DRIVERKIT # driverkit support # <driverkit>
options KERNOBJC # Objective-C support # <kernobjc>
options OBJCTEST # Objc internal test # <objctest>
options KERNEL_STACK # MI kernel stack support # <kernstack>
profile # build a profiling kernel # <profile>
#
# Point-to-Point Protocol support
#
pseudo-device ppp 2 # <ppp>
#
# IPv6 Support
#
options "INET6" # kernel IPv6 Support # <inet6>
options IPSEC # IP security # <ipsec>
options IPSEC_ESP # IP security # <ipsec>
options "IPV6FIREWALL" # IPv6 Firewall Feature # <ipv6firewall>
options "IPV6FIREWALL_DEFAULT_TO_ACCEPT" #IPv6 Firewall Feature # <ipv6firewall>
#options "IPV6FIREWALL_VERBOSE" #IPv6 Firewall Feature # <ipv6firewall>
pseudo-device gif 1 # <gif>
pseudo-device dummy 2 # <dummy>
pseudo-device faith 1 # <faith>
pseudo-device stf 1 # <stf>
options crypto # <ipsec,crypto>
options ALLCRYPTO # <xlarge,large,medium>
options randomipid # <inet,randomipid>
options ZLIB # inflate/deflate support # <zlib>
makeoptions LIBDRIVER = "libDriver_kern.o" # <libdriver>
makeoptions LIBOBJC = "libkobjc.o" # <kernobjc>
maxusers 64 # <xlarge>
maxusers 50 # <large>
maxusers 32 # <medium>
maxusers 16 # <small>
maxusers 8 # <xsmall>
maxusers 2 # <bsmall>
#
# Multi-processor selection
#
pseudo-device cpus 64 # <multi64>
pseudo-device cpus 32 # <multi32>
pseudo-device cpus 16 # <multi16>
pseudo-device cpus 2 # <multi2>
pseudo-device cpus 1 # <!multi64,multi32,multi16,multi2>
#
# configurable kernel event related resources
#
options CONFIG_KN_HASHSIZE=64 # <medium,large,xlarge>
options CONFIG_KN_HASHSIZE=48 # <small,xsmall>
options CONFIG_KN_HASHSIZE=20 # <bsmall>
#
# configurable vfs related resources
# CONFIG_VNODES - used to pre allocate vnode related resources
# CONFIG_VNODE_FREE_MIN - mininmum number of free vnodes
# CONFIG_NC_HASH - name cache hash table allocation
# CONFIG_VFS_NAMES - name strings
#
# 263168 magic number for medium CONFIG_VNODES is based on memory
# Number vnodes is (memsize/64k) + 1024
# This is the calculation that is used by launchd in tiger
# we are clipping the max based on 16G
# ie ((16*1024*1024*1024)/(64 *1024)) + 1024 = 263168;
options CONFIG_VNODES=263168 # <large,xlarge>
options CONFIG_VNODES=263168 # <medium>
options CONFIG_VNODES=10240 # <small>
options CONFIG_VNODES=1024 # <xsmall>
options CONFIG_VNODES=750 # <bsmall>
options CONFIG_VNODE_FREE_MIN=500 # <large,xlarge>
options CONFIG_VNODE_FREE_MIN=300 # <medium>
options CONFIG_VNODE_FREE_MIN=200 # <small>
options CONFIG_VNODE_FREE_MIN=100 # <xsmall>
options CONFIG_VNODE_FREE_MIN=75 # <bsmall>
options CONFIG_NC_HASH=5120 # <large,xlarge>
options CONFIG_NC_HASH=4096 # <medium>
options CONFIG_NC_HASH=2048 # <small,xsmall>
options CONFIG_NC_HASH=1024 # <bsmall>
options CONFIG_VFS_NAMES=5120 # <large,xlarge>
options CONFIG_VFS_NAMES=4096 # <medium>
options CONFIG_VFS_NAMES=3072 # <small,xsmall>
options CONFIG_VFS_NAMES=2048 # <bsmall>
#
# configurable kauth credential related resources
#
options KAUTH_CRED_PRIMES_COUNT=7 # <medium,large,xlarge>
options KAUTH_CRED_PRIMES_COUNT=3 # <bsmall,xsmall,small>
options KAUTH_CRED_PRIMES="{97, 241, 397, 743, 1499, 3989, 7499}" # <medium,large,xlarge>
options KAUTH_CRED_PRIMES="{5, 17, 97}" # <bsmall,xsmall,small>
#
# configurable options for minumum number of buffers for kernel memory
#
options CONFIG_MIN_NBUF=256 # <medium,large,xlarge>
options CONFIG_MIN_NBUF=128 # <small>
options CONFIG_MIN_NBUF=80 # <xsmall>
options CONFIG_MIN_NBUF=64 # <bsmall>
options CONFIG_MIN_NIOBUF=128 # <medium,large,xlarge>
options CONFIG_MIN_NIOBUF=64 # <xsmall,small>
options CONFIG_MIN_NIOBUF=32 # <bsmall>
#
# set maximum space used for packet buffers
#
options CONFIG_NMBCLUSTERS="((1024 * 1024) / MCLBYTES)" # <large,xlarge>
options CONFIG_NMBCLUSTERS="((1024 * 512) / MCLBYTES)" # <medium>
options CONFIG_NMBCLUSTERS="((1024 * 256) / MCLBYTES)" # <bsmall,xsmall,small>
#
# set maximum space used for packet buffers
#
options CONFIG_USESOCKTHRESHOLD=1 # <large,xlarge,medium>
options CONFIG_USESOCKTHRESHOLD=0 # <bsmall,xsmall,small>
#
# Configure size of TCP hash table
#
options CONFIG_TCBHASHSIZE=4096 # <medium,large,xlarge>
options CONFIG_TCBHASHSIZE=128 # <xsmall,small,bsmall>
#
# configurable async IO options
# CONFIG_AIO_MAX - system wide limit of async IO requests.
# CONFIG_AIO_PROCESS_MAX - process limit of async IO requests.
# CONFIG_AIO_THREAD_COUNT - number of async IO worker threads created.
#
options CONFIG_AIO_MAX=360 # <xlarge>
options CONFIG_AIO_MAX=180 # <large>
options CONFIG_AIO_MAX=90 # <medium>
options CONFIG_AIO_MAX=45 # <small>
options CONFIG_AIO_MAX=20 # <xsmall>
options CONFIG_AIO_MAX=10 # <bsmall>
options CONFIG_AIO_PROCESS_MAX=64 # <xlarge>
options CONFIG_AIO_PROCESS_MAX=32 # <large>
options CONFIG_AIO_PROCESS_MAX=16 # <medium>
options CONFIG_AIO_PROCESS_MAX=12 # <small>
options CONFIG_AIO_PROCESS_MAX=8 # <xsmall>
options CONFIG_AIO_PROCESS_MAX=4 # <bsmall>
options CONFIG_AIO_THREAD_COUNT=16 # <xlarge>
options CONFIG_AIO_THREAD_COUNT=8 # <large>
options CONFIG_AIO_THREAD_COUNT=4 # <medium>
options CONFIG_AIO_THREAD_COUNT=3 # <small>
options CONFIG_AIO_THREAD_COUNT=2 # <xsmall,bsmall>
#
# configurable kernel related resources (CONFIG_THREAD_MAX needs to stay in
# sync with osfmk/conf/MASTER until we fix the config system...) todo XXX
#
options CONFIG_THREAD_MAX=2560 # <medium,large,xlarge>
options CONFIG_THREAD_MAX=1536 # <small,xsmall>
options CONFIG_THREAD_MAX=1024 # <bsmall>
options CONFIG_MAXVIFS=32 # <medium,large,xlarge>
options CONFIG_MAXVIFS=16 # <small,xsmall>
options CONFIG_MAXVIFS=2 # <bsmall>
options CONFIG_MFCTBLSIZ=256 # <medium,large,xlarge>
options CONFIG_MFCTBLSIZ=128 # <small,xsmall>
options CONFIG_MFCTBLSIZ=16 # <bsmall>
#
# configurable kernel - use these options to strip strings from panic
# and printf calls.
# no_panic_str - saves around 50K of kernel footprint.
# no_printf_str - saves around 45K of kernel footprint.
#
options CONFIG_NO_PANIC_STRINGS # <no_panic_str>
options CONFIG_NO_PRINTF_STRINGS # <no_printf_str>
options CONFIG_NO_KPRINTF_STRINGS # <no_kprintf_str>
#
# configurable kernel - general switch to say we are building for an
# embedded device
#
options CONFIG_EMBEDDED # <config_embedded>
# only execute signed code. Hang this off config_embedded since there's
# nothing more appropriate right now
#
options CONFIG_ENFORCE_SIGNED_CODE # <config_embedded>
#
# code decryption... used on embedded for app protection
# must be set in all the bsd/conf and osfmk/conf MASTER files
#
options CONFIG_CODE_DECRYPTION # <config_embedded>
#
# Ethernet (ARP)
#
pseudo-device ether # <networking,inet,inet6,netat>
#
# Network loopback device
#
pseudo-device loop # <networking,inet,inet6,netat>
#
# UCB pseudo terminal service
#
pseudo-device pty 512 init pty_init # <xlarge>
pseudo-device pty 256 init pty_init # <large>
pseudo-device pty 128 init pty_init # <medium>
pseudo-device pty 48 init pty_init # <small>
pseudo-device pty 16 init pty_init # <xsmall>
pseudo-device pty 8 init pty_init # <bsmall>
#
# Cloning pseudo terminal service
#
pseudo-device ptmx 1 init ptmx_init
#
# vnode device
#
pseudo-device vndevice 16 init vndevice_init # <xlarge>
pseudo-device vndevice 8 init vndevice_init # <large>
pseudo-device vndevice 4 init vndevice_init # <medium>
pseudo-device vndevice 3 init vndevice_init # <small>
pseudo-device vndevice 2 init vndevice_init # <bsmall>
#
# memory device
pseudo-device mdevdevice 1 init mdevinit
#
#
# packet filter device
#
pseudo-device bpfilter 4 init bpf_init # <networking,inet,inet6,netat>
#
# fsevents device
pseudo-device fsevents 1 init fsevents_init # <config_fse>
#
# shim to "linux" mach disk drivers (mach drivers must also be turned on)
#
# now using iokit disk shim, this is code is obsolete
#pseudo-device diskshim
pseudo-device random 1 init random_init
pseudo-device dtrace 1 init dtrace_init # <config_dtrace>
pseudo-device helper 1 init helper_init # <config_dtrace>
pseudo-device lockstat 1 init lockstat_init # <config_dtrace>
pseudo-device sdt 1 init sdt_init # <config_dtrace>
pseudo-device systrace 1 init systrace_init # <config_dtrace>
pseudo-device fbt 1 init fbt_init # <config_dtrace>
pseudo-device profile_prvd 1 init profile_init # <config_dtrace>