pk_output.c   [plain text]


/*
 * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
 *
 * @APPLE_LICENSE_HEADER_START@
 * 
 * The contents of this file constitute Original Code as defined in and
 * are subject to the Apple Public Source License Version 1.1 (the
 * "License").  You may not use this file except in compliance with the
 * License.  Please obtain a copy of the License at
 * http://www.apple.com/publicsource and read it before using this file.
 * 
 * This Original Code and all software distributed under the License are
 * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
 * License for the specific language governing rights and limitations
 * under the License.
 * 
 * @APPLE_LICENSE_HEADER_END@
 */
/*
 * Copyright (c) University of British Columbia, 1984
 * Copyright (C) Computer Science Department IV, 
 * 		 University of Erlangen-Nuremberg, Germany, 1992
 * Copyright (c) 1991, 1992, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by the
 * Laboratory for Computation Vision and the Computer Science Department
 * of the the University of British Columbia and the Computer Science
 * Department (IV) of the University of Erlangen-Nuremberg, Germany.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)pk_output.c	8.1 (Berkeley) 6/10/93
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/protosw.h>
#include <sys/errno.h>

#include <net/if.h>

#include <netccitt/x25.h>
#include <netccitt/pk.h>
#include <netccitt/pk_var.h>

struct mbuf_cache pk_output_cache = {0 }, pk_input_cache;
struct	mbuf *nextpk ();

pk_output (lcp)
register struct pklcd *lcp;
{
	register struct x25_packet *xp;
	register struct mbuf *m;
	register struct pkcb *pkp = lcp -> lcd_pkp;

	if (lcp == 0 || pkp == 0) {
		printf ("pk_output: zero arg\n");
		return;
	}

	while ((m = nextpk (lcp)) != NULL) {
		xp = mtod (m, struct x25_packet *);

		switch (pk_decode (xp) + lcp -> lcd_state) {
		/* 
		 *  All the work is already done - just set the state and
		 *  pass to peer.
		 */
		case CALL + READY: 
			lcp -> lcd_state = SENT_CALL;
			lcp -> lcd_timer = pk_t21;
			break;

		/*
		 *  Just set the state to allow packet to flow and send the
		 *  confirmation.
		 */
		case CALL_ACCEPTED + RECEIVED_CALL: 
			lcp -> lcd_state = DATA_TRANSFER;
			break;

		/* 
		 *  Just set the state. Keep the LCD around till the clear
		 *  confirmation is returned.
		 */
		case CLEAR + RECEIVED_CALL: 
		case CLEAR + SENT_CALL: 
		case CLEAR + DATA_TRANSFER: 
			lcp -> lcd_state = SENT_CLEAR;
			lcp -> lcd_retry = 0;
			/* fall through */

		case CLEAR + SENT_CLEAR:
			lcp -> lcd_timer = pk_t23;
			lcp -> lcd_retry++;
			break;

		case CLEAR_CONF + RECEIVED_CLEAR: 
		case CLEAR_CONF + SENT_CLEAR: 
		case CLEAR_CONF + READY: 
			lcp -> lcd_state = READY;
			break;

		case DATA + DATA_TRANSFER: 
			SPS(xp, lcp -> lcd_ssn);
			lcp -> lcd_input_window =
				(lcp -> lcd_rsn + 1) % MODULUS;
			SPR(xp, lcp -> lcd_input_window);
			lcp -> lcd_last_transmitted_pr = lcp -> lcd_input_window;
			lcp -> lcd_ssn = (lcp -> lcd_ssn + 1) % MODULUS;
			if (lcp -> lcd_ssn == ((lcp -> lcd_output_window + lcp -> lcd_windowsize) % MODULUS))
				lcp -> lcd_window_condition = TRUE;
			break;

		case INTERRUPT + DATA_TRANSFER: 
#ifdef ancient_history
			xp -> packet_data = 0;
#endif
			lcp -> lcd_intrconf_pending = TRUE;
			break;

		case INTERRUPT_CONF + DATA_TRANSFER: 
			break;

		case RR + DATA_TRANSFER: 
		case RNR + DATA_TRANSFER: 
			lcp -> lcd_input_window =
				(lcp -> lcd_rsn + 1) % MODULUS;
			SPR(xp, lcp -> lcd_input_window);
			lcp -> lcd_last_transmitted_pr = lcp -> lcd_input_window;
			break;

		case RESET + DATA_TRANSFER: 
			lcp -> lcd_reset_condition = TRUE;
			break;

		case RESET_CONF + DATA_TRANSFER: 
			lcp -> lcd_reset_condition = FALSE;
			break;

		/* 
		 *  A restart should be only generated internally. Therefore
		 *  all logic for restart is in the pk_restart routine.
		 */
		case RESTART + READY: 
			lcp -> lcd_timer = pk_t20;
			break;

		/* 
		 *  Restarts are all  handled internally.  Therefore all the
		 *  logic for the incoming restart packet is handled in  the
		 *  pk_input routine.
		 */
		case RESTART_CONF + READY: 
			break;

		default: 
			m_freem (m);
			return;
		}

		/* Trace the packet. */
		pk_trace (pkp -> pk_xcp, m, "P-Out");

		/* Pass the packet on down to the link layer */
		if (pk_input_cache.mbc_size || pk_input_cache.mbc_oldsize) {
			m->m_flags |= 0x08;
			mbuf_cache(&pk_input_cache, m);
		}
		(*pkp -> pk_lloutput) (pkp -> pk_llnext, m, pkp -> pk_rt);
	}
}

/* 
 *  This procedure returns the next packet to send or null. A
 *  packet is composed of one or more mbufs.
 */

struct mbuf *
nextpk (lcp)
struct pklcd *lcp;
{
	register struct mbuf *m, *n;
	struct socket *so = lcp -> lcd_so;
	register struct sockbuf *sb = & (so ? so -> so_snd : lcp -> lcd_sb);

	if (lcp -> lcd_template) {
		m = lcp -> lcd_template;
		lcp -> lcd_template = NULL;
	} else {
		if (lcp -> lcd_rnr_condition || lcp -> lcd_window_condition ||
				lcp -> lcd_reset_condition)
			return (NULL);

		if ((m = sb -> sb_mb) == 0)
			return (NULL);

 		sb -> sb_mb = m -> m_nextpkt;
 		m->m_act = 0;
		for (n = m; n; n = n -> m_next)
			sbfree (sb, n);
	}
	return (m);
}