kern_synch.c   [plain text]

/*
 * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
 *
 * @APPLE_LICENSE_HEADER_START@
 * 
 * The contents of this file constitute Original Code as defined in and
 * are subject to the Apple Public Source License Version 1.1 (the
 * "License").  You may not use this file except in compliance with the
 * License.  Please obtain a copy of the License at
 * http://www.apple.com/publicsource and read it before using this file.
 * 
 * This Original Code and all software distributed under the License are
 * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
 * License for the specific language governing rights and limitations
 * under the License.
 * 
 * @APPLE_LICENSE_HEADER_END@
 */
/* 
 * Mach Operating System
 * Copyright (c) 1987 Carnegie-Mellon University
 * All rights reserved.  The CMU software License Agreement specifies
 * the terms and conditions for use and redistribution.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/file.h>
#include <sys/vnode.h>
#include <sys/kernel.h>
#include <sys/buf.h>

#include <machine/spl.h>

#include <kern/queue.h>
#include <sys/lock.h>
#include <kern/thread.h>
#include <kern/ast.h>

#include <kern/cpu_number.h>
#include <vm/vm_kern.h>

#include <kern/task.h>
#include <mach/time_value.h>

_sleep_continue()
{
	register struct proc *p;
	register thread_t thread = current_thread();
	thread_act_t th_act;
	struct uthread * ut;
	int sig, catch;
	int error = 0;

	th_act = current_act();
	ut = get_bsdthread_info(th_act);
	catch = ut->uu_pri & PCATCH;
	p = current_proc();

#if FIXME  /* [ */
	thread->wait_mesg = NULL;
#endif  /* FIXME ] */
	switch (get_thread_waitresult(thread)) {
		case THREAD_TIMED_OUT:
			error = EWOULDBLOCK;
			break;
		case THREAD_AWAKENED:
			/*
			 * Posix implies any signal should be delivered
			 * first, regardless of whether awakened due
			 * to receiving event.
			 */
			if (!catch)
				break;
			/* else fall through */
		case THREAD_INTERRUPTED:
			if (catch) {
				unix_master();
				if (thread_should_abort(current_thread())) {
					error = EINTR;
				} else if (SHOULDissignal(p,ut)) {
					if (sig = CURSIG(p)) {
						if (p->p_sigacts->ps_sigintr & sigmask(sig))
							error = EINTR;
						else
							error = ERESTART;
					}
					if (thread_should_abort(current_thread())) {
						error = EINTR;
					}
				}
				unix_release();
			}  else
				error = EINTR;
			break;
	}

	if ((error == EINTR) || (error == ERESTART)) {
#ifdef BSD_USE_APC
		thread_apc_set(th_act, bsd_ast);
#else
                thread_ast_set(th_act, AST_BSD);
                ast_on(AST_BSD);
#endif
	}
	if (ut->uu_timo)
		thread_cancel_timer();

#if 0
	/* We should never get here without funnel, so we should not grab again */
	thread_funnel_set(kernel_flock, TRUE);
#endif /* 0 */
	unix_syscall_return((*ut->uu_continuation)(error));
}

/*
 * Give up the processor till a wakeup occurs
 * on chan, at which time the process
 * enters the scheduling queue at priority pri.
 * The most important effect of pri is that when
 * pri<=PZERO a signal cannot disturb the sleep;
 * if pri>PZERO signals will be processed.
 * If pri&PCATCH is set, signals will cause sleep
 * to return 1, rather than longjmp.
 * Callers of this routine must be prepared for
 * premature return, and check that the reason for
 * sleeping has gone away.
 */

#if FIXME
static __inline__
#endif
int
_sleep(chan, pri, wmsg, timo, continuation)
	caddr_t chan;
	int pri;
	char *wmsg;
	int timo;
	int (*continuation)();
{
	register struct proc *p;
	register thread_t thread = current_thread();
	thread_act_t th_act;
	struct uthread * ut;
	int sig, catch = pri & PCATCH;
	int sigttblock = pri & PTTYBLOCK;
	int error = 0;
	spl_t	s;

	s = splhigh();

	th_act = current_act();
	ut = get_bsdthread_info(th_act);
	
	p = current_proc();
#if KTRACE
	if (KTRPOINT(p, KTR_CSW))
		ktrcsw(p->p_tracep, 1, 0);
#endif	
	p->p_priority = pri & PRIMASK;
		
	if (chan)
		assert_wait(chan, (catch) ? THREAD_ABORTSAFE : THREAD_UNINT);
		
	if (timo)
		thread_set_timer(timo, NSEC_PER_SEC / hz);
	/*
	 * We start our timeout
	 * before calling CURSIG, as we could stop there, and a wakeup
	 * or a SIGCONT (or both) could occur while we were stopped.
	 * A SIGCONT would cause us to be marked as SSLEEP
	 * without resuming us, thus we must be ready for sleep
	 * when CURSIG is called.  If the wakeup happens while we're
	 * stopped, p->p_wchan will be 0 upon return from CURSIG.
	 */
	if (catch) {
		unix_master();
		if (SHOULDissignal(p,ut)) {
			if (sig = CURSIG(p)) {
				clear_wait(thread, THREAD_INTERRUPTED);
				/* if SIGTTOU or SIGTTIN then block till SIGCONT */
				if (sigttblock && ((sig == SIGTTOU) || (sig == SIGTTIN))) {
					p->p_flag |= P_TTYSLEEP;
					/* reset signal bits */
					clear_sigbits(p, sig);
					assert_wait(&p->p_siglist, THREAD_ABORTSAFE);
					/* assert wait can block and SIGCONT should be checked */
					if (p->p_flag & P_TTYSLEEP)
						thread_block(0);
					/* return with success */
					error = 0;
					goto out;
				}
				if (p->p_sigacts->ps_sigintr & sigmask(sig))
					error = EINTR;
				else
					error = ERESTART;
				unix_release();
				goto out;
			}
		}
		if (thread_should_abort(current_thread())) {
			clear_wait(thread, THREAD_INTERRUPTED);
			error = EINTR;
			unix_release();
			goto out;
		}
		if (get_thread_waitevent(thread) == 0) {  /*already happened */
			unix_release();
			goto out;
		}
		unix_release();
	}

#if FIXME  /* [ */
	thread->wait_mesg = wmsg;
#endif  /* FIXME ] */
	splx(s);
	p->p_stats->p_ru.ru_nvcsw++;

	if (continuation != (int (*)()) 0 ) {
	  ut->uu_continuation = continuation;
	  ut->uu_pri = pri;
	  ut->uu_timo = timo;
	  thread_block(_sleep_continue);
	  /* NOTREACHED */
	}

	thread_block(0);

#if FIXME  /* [ */
	thread->wait_mesg = NULL;
#endif  /* FIXME ] */
	switch (get_thread_waitresult(thread)) {
		case THREAD_TIMED_OUT:
			error = EWOULDBLOCK;
			break;
		case THREAD_AWAKENED:
			/*
			 * Posix implies any signal should be delivered
			 * first, regardless of whether awakened due
			 * to receiving event.
			 */
			if (!catch)
				break;
			/* else fall through */
		case THREAD_INTERRUPTED:
			if (catch) {
				unix_master();
				if (thread_should_abort(current_thread())) {
					error = EINTR;
				} else if (SHOULDissignal(p,ut)) {
					if (sig = CURSIG(p)) {
						if (p->p_sigacts->ps_sigintr & sigmask(sig))
							error = EINTR;
						else
							error = ERESTART;
					}
					if (thread_should_abort(current_thread())) {
						error = EINTR;
					}
				}
				unix_release();
			}  else
				error = EINTR;
			break;
	}
out:
	if ((error == EINTR) || (error == ERESTART)) {
#ifdef BSD_USE_APC
		thread_apc_set(th_act, bsd_ast);
#else
                thread_ast_set(th_act, AST_BSD);
                ast_on(AST_BSD);
#endif
	}
	if (timo)
		thread_cancel_timer();
	(void) splx(s);
	return (error);
}

int sleep(chan, pri)
	void *chan;
	int pri;
{

	return (_sleep((caddr_t)chan, pri, (char *)NULL, 0, (void (*)())0 ));
	
}

int	tsleep(chan, pri, wmsg, timo)
	void *chan;
	int pri;
	char * wmsg;
	int	timo;
{			
	return(_sleep((caddr_t)chan, pri, wmsg, timo, (void (*)())0 ));
}

int	tsleep0(chan, pri, wmsg, timo, continuation)
	void *chan;
	int pri;
	char * wmsg;
	int	timo;
	int (*continuation)();
{			
#if defined (__i386__)
	return(_sleep((caddr_t)chan, pri, wmsg, timo, (void (*)())0 ));
#else
	return(_sleep((caddr_t)chan, pri, wmsg, timo, continuation));
#endif
}

/*
 * Wake up all processes sleeping on chan.
 */
void
wakeup(chan)
	register void *chan;
{
	thread_wakeup_prim((caddr_t)chan,FALSE, THREAD_AWAKENED);
}

/*
 * Wake up the first process sleeping on chan.
 *
 * Be very sure that the first process is really
 * the right one to wakeup.
 */
wakeup_one(chan)
	register caddr_t chan;
{
	thread_wakeup_prim((caddr_t)chan, TRUE, THREAD_AWAKENED);
}

/*
 * Compute the priority of a process when running in user mode.
 * Arrange to reschedule if the resulting priority is better
 * than that of the current process.
 */
void
resetpriority(p)
	register struct proc *p;
{
	int newpri;
#if FIXME
	if (p->p_nice < 0)
	    newpri = BASEPRI_USER +
		(p->p_nice * (MAXPRI_USER - BASEPRI_USER)) / PRIO_MIN;
	else
	    newpri = BASEPRI_USER -
		(p->p_nice * BASEPRI_USER) / PRIO_MAX;

	(void)task_priority(p->task, newpri, TRUE);
#endif /* FIXME */
}