SUDOERS.LDAP(1m) System Manager's Manual SUDOERS.LDAP(1m) NNAAMMEE ssuuddooeerrss..llddaapp - sudo LDAP configuration DDEESSCCRRIIPPTTIIOONN In addition to the standard _s_u_d_o_e_r_s file, ssuuddoo may be configured via LDAP. This can be especially useful for synchronizing _s_u_d_o_e_r_s in a large, distributed environment. Using LDAP for _s_u_d_o_e_r_s has several benefits: oo ssuuddoo no longer needs to read _s_u_d_o_e_r_s in its entirety. When LDAP is used, there are only two or three LDAP queries per invocation. This makes it especially fast and particularly usable in LDAP environments. oo ssuuddoo no longer exits if there is a typo in _s_u_d_o_e_r_s. It is not possible to load LDAP data into the server that does not conform to the sudoers schema, so proper syntax is guaranteed. It is still possible to have typos in a user or host name, but this will not prevent ssuuddoo from running. oo It is possible to specify per-entry options that override the global default options. _/_e_t_c_/_s_u_d_o_e_r_s only supports default options and limited options associated with user/host/commands/aliases. The syntax is complicated and can be difficult for users to understand. Placing the options directly in the entry is more natural. oo The vviissuuddoo program is no longer needed. vviissuuddoo provides locking and syntax checking of the _/_e_t_c_/_s_u_d_o_e_r_s file. Since LDAP updates are atomic, locking is no longer necessary. Because syntax is checked when the data is inserted into LDAP, there is no need for a specialized tool to check syntax. Another major difference between LDAP and file-based _s_u_d_o_e_r_s is that in LDAP, ssuuddoo-specific Aliases are not supported. For the most part, there is really no need for ssuuddoo-specific Aliases. Unix groups or user netgroups can be used in place of User_Aliases and Runas_Aliases. Host netgroups can be used in place of Host_Aliases. Since Unix groups and netgroups can also be stored in LDAP there is no real need for ssuuddoo-specific aliases. Cmnd_Aliases are not really required either since it is possible to have multiple users listed in a sudoRole. Instead of defining a Cmnd_Alias that is referenced by multiple users, one can create a sudoRole that contains the commands and assign multiple users to it. SSUUDDOOeerrss LLDDAAPP ccoonnttaaiinneerr The _s_u_d_o_e_r_s configuration is contained in the ou=SUDOers LDAP container. Sudo first looks for the cn=default entry in the SUDOers container. If found, the multi-valued sudoOption attribute is parsed in the same manner as a global Defaults line in _/_e_t_c_/_s_u_d_o_e_r_s. In the following example, the SSH_AUTH_SOCK variable will be preserved in the environment for all users. dn: cn=defaults,ou=SUDOers,dc=example,dc=com objectClass: top objectClass: sudoRole cn: defaults description: Default sudoOption's go here sudoOption: env_keep+=SSH_AUTH_SOCK The equivalent of a sudoer in LDAP is a sudoRole. It consists of the following attributes: ssuuddooUUsseerr A user name, user ID (prefixed with `#'), Unix group (prefixed with `%'), Unix group ID (prefixed with `%#'), or user netgroup (prefixed with `+'). ssuuddooHHoosstt A host name, IP address, IP network, or host netgroup (prefixed with a `+'). The special value ALL will match any host. ssuuddooCCoommmmaanndd A Unix command with optional command line arguments, potentially including globbing characters (aka wild cards). The special value ALL will match any command. If a command is prefixed with an exclamation point `!', the user will be prohibited from running that command. ssuuddooOOppttiioonn Identical in function to the global options described above, but specific to the sudoRole in which it resides. ssuuddooRRuunnAAssUUsseerr A user name or uid (prefixed with `#') that commands may be run as or a Unix group (prefixed with a `%') or user netgroup (prefixed with a `+') that contains a list of users that commands may be run as. The special value ALL will match any user. The sudoRunAsUser attribute is only available in ssuuddoo versions 1.7.0 and higher. Older versions of ssuuddoo use the sudoRunAs attribute instead. ssuuddooRRuunnAAssGGrroouupp A Unix group or gid (prefixed with `#') that commands may be run as. The special value ALL will match any group. The sudoRunAsGroup attribute is only available in ssuuddoo versions 1.7.0 and higher. ssuuddooNNoottBBeeffoorree A timestamp in the form yyyymmddHHMMSSZ that can be used to provide a start date/time for when the sudoRole will be valid. If multiple sudoNotBefore entries are present, the earliest is used. Note that timestamps must be in Coordinated Universal Time (UTC), not the local timezone. The minute and seconds portions are optional, but some LDAP servers require that they be present (contrary to the RFC). The sudoNotBefore attribute is only available in ssuuddoo versions 1.7.5 and higher and must be explicitly enabled via the SSUUDDOOEERRSS__TTIIMMEEDD option in _/_e_t_c_/_l_d_a_p_._c_o_n_f. ssuuddooNNoottAAfftteerr A timestamp in the form yyyymmddHHMMSSZ that indicates an expiration date/time, after which the sudoRole will no longer be valid. If multiple sudoNotBefore entries are present, the last one is used. Note that timestamps must be in Coordinated Universal Time (UTC), not the local timezone. The minute and seconds portions are optional, but some LDAP servers require that they be present (contrary to the RFC). The sudoNotAfter attribute is only available in ssuuddoo versions 1.7.5 and higher and must be explicitly enabled via the SSUUDDOOEERRSS__TTIIMMEEDD option in _/_e_t_c_/_l_d_a_p_._c_o_n_f. ssuuddooOOrrddeerr The sudoRole entries retrieved from the LDAP directory have no inherent order. The sudoOrder attribute is an integer (or floating point value for LDAP servers that support it) that is used to sort the matching entries. This allows LDAP-based sudoers entries to more closely mimic the behaviour of the sudoers file, where the of the entries influences the result. If multiple entries match, the entry with the highest sudoOrder attribute is chosen. This corresponds to the ``last match'' behavior of the sudoers file. If the sudoOrder attribute is not present, a value of 0 is assumed. The sudoOrder attribute is only available in ssuuddoo versions 1.7.5 and higher. Each attribute listed above should contain a single value, but there may be multiple instances of each attribute type. A sudoRole must contain at least one sudoUser, sudoHost and sudoCommand. The following example allows users in group wheel to run any command on any host via ssuuddoo: dn: cn=%wheel,ou=SUDOers,dc=example,dc=com objectClass: top objectClass: sudoRole cn: %wheel sudoUser: %wheel sudoHost: ALL sudoCommand: ALL AAnnaattoommyy ooff LLDDAAPP ssuuddooeerrss llooookkuupp When looking up a sudoer using LDAP there are only two or three LDAP queries per invocation. The first query is to parse the global options. The second is to match against the user's name and the groups that the user belongs to. (The special ALL tag is matched in this query too.) If no match is returned for the user's name and groups, a third query returns all entries containing user netgroups and checks to see if the user belongs to any of them. If timed entries are enabled with the SSUUDDOOEERRSS__TTIIMMEEDD configuration directive, the LDAP queries include a subfilter that limits retrieval to entries that satisfy the time constraints, if any. DDiiffffeerreenncceess bbeettwweeeenn LLDDAAPP aanndd nnoonn--LLDDAAPP ssuuddooeerrss There are some subtle differences in the way sudoers is handled once in LDAP. Probably the biggest is that according to the RFC, LDAP ordering is arbitrary and you cannot expect that Attributes and Entries are returned in any specific order. The order in which different entries are applied can be controlled using the sudoOrder attribute, but there is no way to guarantee the order of attributes within a specific entry. If there are conflicting command rules in an entry, the negative takes precedence. This is called paranoid behavior (not necessarily the most specific match). Here is an example: # /etc/sudoers: # Allow all commands except shell johnny ALL=(root) ALL,!/bin/sh # Always allows all commands because ALL is matched last puddles ALL=(root) !/bin/sh,ALL # LDAP equivalent of johnny # Allows all commands except shell dn: cn=role1,ou=Sudoers,dc=my-domain,dc=com objectClass: sudoRole objectClass: top cn: role1 sudoUser: johnny sudoHost: ALL sudoCommand: ALL sudoCommand: !/bin/sh # LDAP equivalent of puddles # Notice that even though ALL comes last, it still behaves like # role1 since the LDAP code assumes the more paranoid configuration dn: cn=role2,ou=Sudoers,dc=my-domain,dc=com objectClass: sudoRole objectClass: top cn: role2 sudoUser: puddles sudoHost: ALL sudoCommand: !/bin/sh sudoCommand: ALL Another difference is that negations on the Host, User or Runas are currently ignored. For example, the following attributes do not behave the way one might expect. # does not match all but joe # rather, does not match anyone sudoUser: !joe # does not match all but joe # rather, matches everyone including Joe sudoUser: ALL sudoUser: !joe # does not match all but web01 # rather, matches all hosts including web01 sudoHost: ALL sudoHost: !web01 SSuuddooeerrss sscchheemmaa In order to use ssuuddoo's LDAP support, the ssuuddoo schema must be installed on your LDAP server. In addition, be sure to index the sudoUser attribute. Three versions of the schema: one for OpenLDAP servers (_s_c_h_e_m_a_._O_p_e_n_L_D_A_P), one for Netscape-derived servers (_s_c_h_e_m_a_._i_P_l_a_n_e_t), and one for Microsoft Active Directory (_s_c_h_e_m_a_._A_c_t_i_v_e_D_i_r_e_c_t_o_r_y) may be found in the ssuuddoo distribution. The schema for ssuuddoo in OpenLDAP form is also included in the _E_X_A_M_P_L_E_S section. CCoonnffiigguurriinngg llddaapp..ccoonnff Sudo reads the _/_e_t_c_/_l_d_a_p_._c_o_n_f file for LDAP-specific configuration. Typically, this file is shared amongst different LDAP-aware clients. As such, most of the settings are not ssuuddoo-specific. Note that ssuuddoo parses _/_e_t_c_/_l_d_a_p_._c_o_n_f itself and may support options that differ from those described in the system's ldap.conf(1m) manual. Also note that on systems using the OpenLDAP libraries, default values specified in _/_e_t_c_/_o_p_e_n_l_d_a_p_/_l_d_a_p_._c_o_n_f or the user's _._l_d_a_p_r_c files are not used. Only those options explicitly listed in _/_e_t_c_/_l_d_a_p_._c_o_n_f as being supported by ssuuddoo are honored. Configuration options are listed below in upper case but are parsed in a case-independent manner. UURRII _l_d_a_p_[_s_]_:_/_/_[_h_o_s_t_n_a_m_e_[_:_p_o_r_t_]_] _._._. Specifies a whitespace-delimited list of one or more URIs describing the LDAP server(s) to connect to. The _p_r_o_t_o_c_o_l may be either _l_d_a_p _l_d_a_p_s, the latter being for servers that support TLS (SSL) encryption. If no _p_o_r_t is specified, the default is port 389 for ldap:// or port 636 for ldaps://. If no _h_o_s_t_n_a_m_e is specified, ssuuddoo will connect to _l_o_c_a_l_h_o_s_t. Multiple UURRII lines are treated identically to a UURRII line containing multiple entries. Only systems using the OpenSSL libraries support the mixing of ldap:// and ldaps:// URIs. Both the Netscape-derived and Tivoli LDAP libraries used on most commercial versions of Unix are only capable of supporting one or the other. HHOOSSTT _n_a_m_e_[_:_p_o_r_t_] _._._. If no UURRII is specified, the HHOOSSTT parameter specifies a whitespace- delimited list of LDAP servers to connect to. Each host may include an optional _p_o_r_t separated by a colon (`:'). The HHOOSSTT parameter is deprecated in favor of the UURRII specification and is included for backwards compatibility. PPOORRTT _p_o_r_t___n_u_m_b_e_r If no UURRII is specified, the PPOORRTT parameter specifies the default port to connect to on the LDAP server if a HHOOSSTT parameter does not specify the port itself. If no PPOORRTT parameter is used, the default is port 389 for LDAP and port 636 for LDAP over TLS (SSL). The PPOORRTT parameter is deprecated in favor of the UURRII specification and is included for backwards compatibility. BBIINNDD__TTIIMMEELLIIMMIITT _s_e_c_o_n_d_s The BBIINNDD__TTIIMMEELLIIMMIITT parameter specifies the amount of time, in seconds, to wait while trying to connect to an LDAP server. If multiple UURRIIs or HHOOSSTTs are specified, this is the amount of time to wait before trying the next one in the list. NNEETTWWOORRKK__TTIIMMEEOOUUTT _s_e_c_o_n_d_s An alias for BBIINNDD__TTIIMMEELLIIMMIITT for OpenLDAP compatibility. TTIIMMEELLIIMMIITT _s_e_c_o_n_d_s The TTIIMMEELLIIMMIITT parameter specifies the amount of time, in seconds, to wait for a response to an LDAP query. TTIIMMEEOOUUTT _s_e_c_o_n_d_s The TTIIMMEEOOUUTT parameter specifies the amount of time, in seconds, to wait for a response from the various LDAP APIs. SSUUDDOOEERRSS__BBAASSEE _b_a_s_e The base DN to use when performing ssuuddoo LDAP queries. Typically this is of the form ou=SUDOers,dc=example,dc=com for the domain example.com. Multiple SSUUDDOOEERRSS__BBAASSEE lines may be specified, in which case they are queried in the order specified. SSUUDDOOEERRSS__SSEEAARRCCHH__FFIILLTTEERR _l_d_a_p___f_i_l_t_e_r An LDAP filter which is used to restrict the set of records returned when performing a ssuuddoo LDAP query. Typically, this is of the form attribute=value or (&(attribute=value)(attribute2=value2)). SSUUDDOOEERRSS__TTIIMMEEDD _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o Whether or not to evaluate the sudoNotBefore and sudoNotAfter attributes that implement time-dependent sudoers entries. SSUUDDOOEERRSS__DDEEBBUUGG _d_e_b_u_g___l_e_v_e_l This sets the debug level for ssuuddoo LDAP queries. Debugging information is printed to the standard error. A value of 1 results in a moderate amount of debugging information. A value of 2 shows the results of the matches themselves. This parameter should not be set in a production environment as the extra information is likely to confuse users. BBIINNDDDDNN _D_N The BBIINNDDDDNN parameter specifies the identity, in the form of a Distinguished Name (DN), to use when performing LDAP operations. If not specified, LDAP operations are performed with an anonymous identity. By default, most LDAP servers will allow anonymous access. BBIINNDDPPWW _s_e_c_r_e_t The BBIINNDDPPWW parameter specifies the password to use when performing LDAP operations. This is typically used in conjunction with the BBIINNDDDDNN parameter. RROOOOTTBBIINNDDDDNN _D_N The RROOOOTTBBIINNDDDDNN parameter specifies the identity, in the form of a Distinguished Name (DN), to use when performing privileged LDAP operations, such as _s_u_d_o_e_r_s queries. The password corresponding to the identity should be stored in _/_e_t_c_/_l_d_a_p_._s_e_c_r_e_t. If not specified, the BBIINNDDDDNN identity is used (if any). LLDDAAPP__VVEERRSSIIOONN _n_u_m_b_e_r The version of the LDAP protocol to use when connecting to the server. The default value is protocol version 3. SSSSLL _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o If the SSSSLL parameter is set to on, true or yes, TLS (SSL) encryption is always used when communicating with the LDAP server. Typically, this involves connecting to the server on port 636 (ldaps). SSSSLL _s_t_a_r_t___t_l_s If the SSSSLL parameter is set to start_tls, the LDAP server connection is initiated normally and TLS encryption is begun before the bind credentials are sent. This has the advantage of not requiring a dedicated port for encrypted communications. This parameter is only supported by LDAP servers that honor the _s_t_a_r_t___t_l_s extension, such as the OpenLDAP and Tivoli Directory servers. TTLLSS__CCHHEECCKKPPEEEERR _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o If enabled, TTLLSS__CCHHEECCKKPPEEEERR will cause the LDAP server's TLS certificated to be verified. If the server's TLS certificate cannot be verified (usually because it is signed by an unknown certificate authority), ssuuddoo will be unable to connect to it. If TTLLSS__CCHHEECCKKPPEEEERR is disabled, no check is made. Note that disabling the check creates an opportunity for man-in-the-middle attacks since the server's identity will not be authenticated. If possible, the CA's certificate should be installed locally so it can be verified. This option is not supported by the Tivoli Directory Server LDAP libraries. TTLLSS__CCAACCEERRTT _f_i_l_e _n_a_m_e An alias for TTLLSS__CCAACCEERRTTFFIILLEE for OpenLDAP compatibility. TTLLSS__CCAACCEERRTTFFIILLEE _f_i_l_e _n_a_m_e The path to a certificate authority bundle which contains the certificates for all the Certificate Authorities the client knows to be valid, e.g. _/_e_t_c_/_s_s_l_/_c_a_-_b_u_n_d_l_e_._p_e_m. This option is only supported by the OpenLDAP libraries. Netscape-derived LDAP libraries use the same certificate database for CA and client certificates (see TTLLSS__CCEERRTT). TTLLSS__CCAACCEERRTTDDIIRR _d_i_r_e_c_t_o_r_y Similar to TTLLSS__CCAACCEERRTTFFIILLEE but instead of a file, it is a directory containing individual Certificate Authority certificates, e.g. _/_e_t_c_/_s_s_l_/_c_e_r_t_s. The directory specified by TTLLSS__CCAACCEERRTTDDIIRR is checked after TTLLSS__CCAACCEERRTTFFIILLEE. This option is only supported by the OpenLDAP libraries. TTLLSS__CCEERRTT _f_i_l_e _n_a_m_e The path to a file containing the client certificate which can be used to authenticate the client to the LDAP server. The certificate type depends on the LDAP libraries used. OpenLDAP: tls_cert /etc/ssl/client_cert.pem Netscape-derived: tls_cert /var/ldap/cert7.db Tivoli Directory Server: Unused, the key database specified by TTLLSS__KKEEYY contains both keys and certificates. When using Netscape-derived libraries, this file may also contain Certificate Authority certificates. TTLLSS__KKEEYY _f_i_l_e _n_a_m_e The path to a file containing the private key which matches the certificate specified by TTLLSS__CCEERRTT. The private key must not be password-protected. The key type depends on the LDAP libraries used. OpenLDAP: tls_key /etc/ssl/client_key.pem Netscape-derived: tls_key /var/ldap/key3.db Tivoli Directory Server: tls_cert /usr/ldap/ldapkey.kdb When using Tivoli LDAP libraries, this file may also contain Certificate Authority and client certificates and may be encrypted. TTLLSS__KKEEYYPPWW _s_e_c_r_e_t The TTLLSS__KKEEYYPPWW contains the password used to decrypt the key database on clients using the Tivoli Directory Server LDAP library. If no TTLLSS__KKEEYYPPWW is specified, a _s_t_a_s_h _f_i_l_e will be used if it exists. The _s_t_a_s_h _f_i_l_e must have the same path as the file specified by TTLLSS__KKEEYY, but use a .sth file extension instead of .kdb, e.g. ldapkey.sth. The default ldapkey.kdb that ships with Tivoli Directory Server is encrypted with the password ssl_password. This option is only supported by the Tivoli LDAP libraries. TTLLSS__RRAANNDDFFIILLEE _f_i_l_e _n_a_m_e The TTLLSS__RRAANNDDFFIILLEE parameter specifies the path to an entropy source for systems that lack a random device. It is generally used in conjunction with _p_r_n_g_d or _e_g_d. This option is only supported by the OpenLDAP libraries. TTLLSS__CCIIPPHHEERRSS _c_i_p_h_e_r _l_i_s_t The TTLLSS__CCIIPPHHEERRSS parameter allows the administer to restrict which encryption algorithms may be used for TLS (SSL) connections. See the OpenLDAP or Tivoli Directory Server manual for a list of valid ciphers. This option is not supported by Netscape-derived libraries. UUSSEE__SSAASSLL _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o Enable UUSSEE__SSAASSLL for LDAP servers that support SASL authentication. SSAASSLL__AAUUTTHH__IIDD _i_d_e_n_t_i_t_y The SASL user name to use when connecting to the LDAP server. By default, ssuuddoo will use an anonymous connection. RROOOOTTUUSSEE__SSAASSLL _o_n_/_t_r_u_e_/_y_e_s_/_o_f_f_/_f_a_l_s_e_/_n_o Enable RROOOOTTUUSSEE__SSAASSLL to enable SASL authentication when connecting to an LDAP server from a privileged process, such as ssuuddoo. RROOOOTTSSAASSLL__AAUUTTHH__IIDD _i_d_e_n_t_i_t_y The SASL user name to use when RROOOOTTUUSSEE__SSAASSLL is enabled. SSAASSLL__SSEECCPPRROOPPSS _n_o_n_e_/_p_r_o_p_e_r_t_i_e_s SASL security properties or _n_o_n_e for no properties. See the SASL programmer's manual for details. KKRRBB55__CCCCNNAAMMEE _f_i_l_e _n_a_m_e The path to the Kerberos 5 credential cache to use when authenticating with the remote server. DDEERREEFF _n_e_v_e_r_/_s_e_a_r_c_h_i_n_g_/_f_i_n_d_i_n_g_/_a_l_w_a_y_s How alias dereferencing is to be performed when searching. See the ldap.conf(1m) manual for a full description of this option. See the _l_d_a_p_._c_o_n_f entry in the _E_X_A_M_P_L_E_S section. CCoonnffiigguurriinngg nnsssswwiittcchh..ccoonnff Unless it is disabled at build time, ssuuddoo consults the Name Service Switch file, _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f, to specify the _s_u_d_o_e_r_s search order. Sudo looks for a line beginning with sudoers: and uses this to determine the search order. Note that ssuuddoo does not stop searching after the first match and later matches take precedence over earlier ones. The following sources are recognized: files read sudoers from _/_e_t_c_/_s_u_d_o_e_r_s ldap read sudoers from LDAP In addition, the entry [NOTFOUND=return] will short-circuit the search if the user was not found in the preceding source. To consult LDAP first followed by the local sudoers file (if it exists), use: sudoers: ldap files The local _s_u_d_o_e_r_s file can be ignored completely by using: sudoers: ldap If the _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f file is not present or there is no sudoers line, the following default is assumed: sudoers: files Note that _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f is supported even when the underlying operating system does not use an nsswitch.conf file, except on AIX (see below). CCoonnffiigguurriinngg nneettssvvcc..ccoonnff On AIX systems, the _/_e_t_c_/_n_e_t_s_v_c_._c_o_n_f file is consulted instead of _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f. ssuuddoo simply treats _n_e_t_s_v_c_._c_o_n_f as a variant of _n_s_s_w_i_t_c_h_._c_o_n_f; information in the previous section unrelated to the file format itself still applies. To consult LDAP first followed by the local sudoers file (if it exists), use: sudoers = ldap, files The local _s_u_d_o_e_r_s file can be ignored completely by using: sudoers = ldap To treat LDAP as authoratative and only use the local sudoers file if the user is not present in LDAP, use: sudoers = ldap = auth, files Note that in the above example, the auth qualfier only affects user lookups; both LDAP and _s_u_d_o_e_r_s will be queried for Defaults entries. If the _/_e_t_c_/_n_e_t_s_v_c_._c_o_n_f file is not present or there is no sudoers line, the following default is assumed: sudoers = files FFIILLEESS _/_e_t_c_/_l_d_a_p_._c_o_n_f LDAP configuration file _/_e_t_c_/_n_s_s_w_i_t_c_h_._c_o_n_f determines sudoers source order _/_e_t_c_/_n_e_t_s_v_c_._c_o_n_f determines sudoers source order on AIX EEXXAAMMPPLLEESS EExxaammppllee llddaapp..ccoonnff # Either specify one or more URIs or one or more host:port pairs. # If neither is specified sudo will default to localhost, port 389. # #host ldapserver #host ldapserver1 ldapserver2:390 # # Default port if host is specified without one, defaults to 389. #port 389 # # URI will override the host and port settings. uri ldap://ldapserver #uri ldaps://secureldapserver #uri ldaps://secureldapserver ldap://ldapserver # # The amount of time, in seconds, to wait while trying to connect to # an LDAP server. bind_timelimit 30 # # The amount of time, in seconds, to wait while performing an LDAP query. timelimit 30 # # Must be set or sudo will ignore LDAP; may be specified multiple times. sudoers_base ou=SUDOers,dc=example,dc=com # # verbose sudoers matching from ldap #sudoers_debug 2 # # Enable support for time-based entries in sudoers. #sudoers_timed yes # # optional proxy credentials #binddn #bindpw #rootbinddn # # LDAP protocol version, defaults to 3 #ldap_version 3 # # Define if you want to use an encrypted LDAP connection. # Typically, you must also set the port to 636 (ldaps). #ssl on # # Define if you want to use port 389 and switch to # encryption before the bind credentials are sent. # Only supported by LDAP servers that support the start_tls # extension such as OpenLDAP. #ssl start_tls # # Additional TLS options follow that allow tweaking of the # SSL/TLS connection. # #tls_checkpeer yes # verify server SSL certificate #tls_checkpeer no # ignore server SSL certificate # # If you enable tls_checkpeer, specify either tls_cacertfile # or tls_cacertdir. Only supported when using OpenLDAP. # #tls_cacertfile /etc/certs/trusted_signers.pem #tls_cacertdir /etc/certs # # For systems that don't have /dev/random # use this along with PRNGD or EGD.pl to seed the # random number pool to generate cryptographic session keys. # Only supported when using OpenLDAP. # #tls_randfile /etc/egd-pool # # You may restrict which ciphers are used. Consult your SSL # documentation for which options go here. # Only supported when using OpenLDAP. # #tls_ciphers # # Sudo can provide a client certificate when communicating to # the LDAP server. # Tips: # * Enable both lines at the same time. # * Do not password protect the key file. # * Ensure the keyfile is only readable by root. # # For OpenLDAP: #tls_cert /etc/certs/client_cert.pem #tls_key /etc/certs/client_key.pem # # For SunONE or iPlanet LDAP, tls_cert and tls_key may specify either # a directory, in which case the files in the directory must have the # default names (e.g. cert8.db and key4.db), or the path to the cert # and key files themselves. However, a bug in version 5.0 of the LDAP # SDK will prevent specific file names from working. For this reason # it is suggested that tls_cert and tls_key be set to a directory, # not a file name. # # The certificate database specified by tls_cert may contain CA certs # and/or the client's cert. If the client's cert is included, tls_key # should be specified as well. # For backward compatibility, "sslpath" may be used in place of tls_cert. #tls_cert /var/ldap #tls_key /var/ldap # # If using SASL authentication for LDAP (OpenSSL) # use_sasl yes # sasl_auth_id # rootuse_sasl yes # rootsasl_auth_id # sasl_secprops none # krb5_ccname /etc/.ldapcache SSuuddoo sscchheemmaa ffoorr OOppeennLLDDAAPP The following schema, in OpenLDAP format, is included with ssuuddoo source and binary distributions as _s_c_h_e_m_a_._O_p_e_n_L_D_A_P. Simply copy it to the schema directory (e.g. _/_e_t_c_/_o_p_e_n_l_d_a_p_/_s_c_h_e_m_a), add the proper include line in _s_l_a_p_d_._c_o_n_f and restart ssllaappdd. attributetype ( 1.3.6.1.4.1.15953.9.1.1 NAME 'sudoUser' DESC 'User(s) who may run sudo' EQUALITY caseExactIA5Match SUBSTR caseExactIA5SubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.15953.9.1.2 NAME 'sudoHost' DESC 'Host(s) who may run sudo' EQUALITY caseExactIA5Match SUBSTR caseExactIA5SubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.15953.9.1.3 NAME 'sudoCommand' DESC 'Command(s) to be executed by sudo' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.15953.9.1.4 NAME 'sudoRunAs' DESC 'User(s) impersonated by sudo' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.15953.9.1.5 NAME 'sudoOption' DESC 'Options(s) followed by sudo' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.15953.9.1.6 NAME 'sudoRunAsUser' DESC 'User(s) impersonated by sudo' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.15953.9.1.7 NAME 'sudoRunAsGroup' DESC 'Group(s) impersonated by sudo' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.15953.9.1.8 NAME 'sudoNotBefore' DESC 'Start of time interval for which the entry is valid' EQUALITY generalizedTimeMatch ORDERING generalizedTimeOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 ) attributetype ( 1.3.6.1.4.1.15953.9.1.9 NAME 'sudoNotAfter' DESC 'End of time interval for which the entry is valid' EQUALITY generalizedTimeMatch ORDERING generalizedTimeOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 ) attributeTypes ( 1.3.6.1.4.1.15953.9.1.10 NAME 'sudoOrder' DESC 'an integer to order the sudoRole entries' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 ) objectclass ( 1.3.6.1.4.1.15953.9.2.1 NAME 'sudoRole' SUP top STRUCTURAL DESC 'Sudoer Entries' MUST ( cn ) MAY ( sudoUser $ sudoHost $ sudoCommand $ sudoRunAs $ sudoRunAsUser $ sudoRunAsGroup $ sudoOption $ sudoNotBefore $ sudoNotAfter $ sudoOrder $ description ) ) SSEEEE AALLSSOO ldap.conf(1m), sudoers(1m) CCAAVVEEAATTSS Note that there are differences in the way that LDAP-based _s_u_d_o_e_r_s is parsed compared to file-based _s_u_d_o_e_r_s. See the _D_i_f_f_e_r_e_n_c_e_s _b_e_t_w_e_e_n _L_D_A_P _a_n_d _n_o_n_-_L_D_A_P _s_u_d_o_e_r_s section for more information. BBUUGGSS If you feel you have found a bug in ssuuddoo, please submit a bug report at http://www.sudo.ws/sudo/bugs/ SSUUPPPPOORRTT Limited free support is available via the sudo-users mailing list, see http://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives. DDIISSCCLLAAIIMMEERR ssuuddoo is provided ``AS IS'' and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. See the LICENSE file distributed with ssuuddoo or http://www.sudo.ws/sudo/license.html for complete details. Sudo 1.7.10 July 12, 2012 Sudo 1.7.10