/* config.h. Generated by configure. */ /* Copyright (c) 1993-2000 * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) * Copyright (c) 1987 Oliver Laumann * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program (see the file COPYING); if not, write to the * Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA * **************************************************************** * $Id: config.h.in,v 1.12 1994/05/31 12:31:36 mlschroe Exp $ FAU */ /********************************************************************** * * User Configuration Section */ /* * Maximum of simultaneously allowed windows per screen session. */ #ifndef MAXWIN # define MAXWIN 40 #endif /* * Define SOCKDIR to be the directory to contain the named sockets * screen creates. This should be in a common subdirectory, such as * /usr/local or /tmp. It makes things a little more secure if you * choose a directory which is not writable by everyone or where the * "sticky" bit is on, but this isn't required. * If SOCKDIR is not defined screen will put the named sockets in * the user's home directory. Notice that this can cause you problems * if some user's HOME directories are AFS- or NFS-mounted. Especially * AFS is unlikely to support named sockets. * * Screen will name the subdirectories "S-$USER" (e.g /tmp/S-davison). */ #define SOCKDIR (eff_uid ? "/tmp/uscreens" : "/tmp/screens") /* * Define this if the SOCKDIR is not shared between hosts. */ #define SOCKDIR_IS_LOCAL_TO_HOST /* * Screen sources two startup files. First a global file with a path * specified here, second your local $HOME/.screenrc * Don't define this, if you don't want it. */ #ifndef ETCSCREENRC # define ETCSCREENRC "/private/etc/screenrc" #endif /* * Screen can look for the environment variable $SYSSCREENRC and -if it * exists- load the file specified in that variable as global screenrc. * If you want to enable this feature, define ALLOW_SYSSCREENRC to one (1). * Otherwise ETCSCREENRC is always loaded. */ #define ALLOW_SYSSCREENRC 1 /* * Screen needs encoding files for the translation of utf8 * into some encodings, e.g. JIS, BIG5. * Only needed if FONT, ENCODINGS and UTF8 are defined. */ #ifndef SCREENENCODINGS # define SCREENENCODINGS "/usr/share/screen/utf8encodings" #endif /* * Define CHECKLOGIN to force Screen users to enter their Unix password * in addition to the screen password. * * Define NOSYSLOG if yo do not have logging facilities. Currently * syslog() will be used to trace ``su'' commands only. */ #define CHECKLOGIN 1 /* #undef NOSYSLOG */ /* * define PTYMODE if you do not like the default of 0622, which allows * public write to your pty. * define PTYGROUP to some numerical group-id if you do not want the * tty to be in "your" group. * Note, screen is unable to change mode or group of the pty if it * is not installed with sufficient privilege. (e.g. set-uid-root) * define PTYROFS if the /dev/pty devices are mounted on a read-only * filesystem so screen should not even attempt to set mode or group * even if running as root (e.g. on TiVo). */ #define PTYMODE 0620 #define PTYGROUP 4 /* #undef PTYROFS */ /* * If screen is NOT installed set-uid root, screen can provide tty * security by exclusively locking the ptys. While this keeps other * users from opening your ptys, it also keeps your own subprocesses * from being able to open /dev/tty. Define LOCKPTY to add this * exclusive locking. */ /* #undef LOCKPTY */ /* * If you'd rather see the status line on the first line of your * terminal rather than the last, define TOPSTAT. */ /* #undef TOPSTAT */ /* * define DETACH can detach a session. An absolute 'must'. */ #define DETACH /* * here come the erlangen extensions to screen: * define LOCK if you want to use a lock program for a screenlock. * define PASSWORD for secure reattach of your screen. * define COPY_PASTE to use the famous hacker's treasure zoo. * define POW_DETACH to have a detach_and_logout key (requires DETACH). * define REMOTE_DETACH (-d option) to move screen between terminals. * define AUTO_NUKE to enable Tim MacKenzies clear screen nuking * define PSEUDOS to allow window input/output filtering * define MULTI to allow multiple attaches. * define MULTIUSER to allow other users attach to your session * (if they are in the acl, of course) * define MAPKEYS to include input keyboard translation. * define FONT to support ISO2022/alternet charset support * define COLOR to include ansi color support. This may expose * a bug in x11r6-color-xterm. * define DW_CHARS to include support for double-width character * sets. * define ENCODINGS to include support for encodings like euc or big5. * Needs FONT to work. * define UTF8 if you want support for UTF-8 encoding. * Needs FONT and ENCODINGS to work. * define COLORS16 if you want 16 colors. * Needs COLOR to work. * define BUILTIN_TELNET to add telnet support to screen. * Syntax: screen //telnet host [port] * define RXVT_OSC if you want support for rxvts special * change fgcolor/bgcolor/bgpicture sequences */ /* #undef SIMPLESCREEN */ #ifndef SIMPLESCREEN # define LOCK # define PASSWORD # define COPY_PASTE # define REMOTE_DETACH # define POW_DETACH # define AUTO_NUKE # define PSEUDOS # define MULTI # define MULTIUSER # define MAPKEYS # define COLOR # define FONT # define DW_CHARS # define ENCODINGS # define UTF8 # define COLORS16 # define ZMODEM # define BLANKER_PRG #endif /* SIMPLESCREEN */ /* #undef BUILTIN_TELNET */ /* #undef RXVT_OSC */ /* #undef COLORS256 */ /* * If you have a braille display you should define HAVE_BRAILLE. * The code inside #ifdef HAVE_BRAILLE was contributed by Hadi Bargi * Rangin (bargi@dots.physics.orst.edu). * WARNING: this is more or less unsupported code, it may be full of * bugs leading to security holes, enable at your own risk! */ /* #undef HAVE_BRAILLE */ /* * As error messages are mostly meaningless to the user, we * try to throw out phrases that are somewhat more familiar * to ...well, at least familiar to us NetHack players. */ #ifndef NONETHACK # define NETHACK #endif /* NONETHACK */ /* * If screen is installed with permissions to update /etc/utmp (such * as if it is installed set-uid root), define UTMPOK. */ /* #undef UTMPOK */ /* Set LOGINDEFAULT to one (1) * if you want entries added to /etc/utmp by default, else set it to * zero (0). * LOGINDEFAULT will be one (1) whenever LOGOUTOK is undefined! */ /* #undef LOGINDEFAULT */ /* Set LOGOUTOK to one (1) * if you want the user to be able to log her/his windows out. * (Meaning: They are there, but not visible in /etc/utmp). * Disabling this feature only makes sense if you have a secure /etc/utmp * database. * Negative examples: suns usually have a world writable utmp file, * xterm will run perfectly without s-bit. * * If LOGOUTOK is undefined and UTMPOK is defined, all windows are * initially and permanently logged in. * * Set CAREFULUTMP to one (1) if you want that users have at least one * window per screen session logged in. */ /* #undef LOGOUTOK */ /* #undef CAREFULUTMP */ /* * If UTMPOK is defined and your system (incorrectly) counts logins by * counting non-null entries in /etc/utmp (instead of counting non-null * entries with no hostname that are not on a pseudo tty), define USRLIMIT * to have screen put an upper-limit on the number of entries to write * into /etc/utmp. This helps to keep you from exceeding a limited-user * license. */ /* #undef USRLIMIT */ /* * both must be defined if you want to favor tcsendbreak over * other calls to generate a break condition on serial lines. * (Do not bother, if you are not using plain tty windows.) */ #define POSIX_HAS_A_GOOD_TCSENDBREAK #define SUNOS4_AND_WE_TRUST_TCSENDBREAK /* * to lower the interrupt load on the host machine, you may want to * adjust the VMIN and VTIME settings used for plain tty windows. * See the termio(4) manual page (Non-Canonical Mode Input Processing) * for details. * if undefined, VMIN=1, VTIME=0 is used as a default - this gives you * best user responsiveness, but highest interrupt frequency. * (Do not bother, if you are not using plain tty windows.) */ #define TTYVMIN 100 #define TTYVTIME 2 /* * looks like the above values are ignored by setting FNDELAY. * This is default for all pty/ttys, you may disable it for * ttys here. After playing with it for a while, one may find out * that this feature may cause screen to lock up. */ #ifdef bsdi # define TTY_DISABLE_FNBLOCK /* select barfs without it ... */ #endif /* * Some terminals, e.g. Wyse 120, use a bitfield to select attributes. * This doesn't work with the standard so/ul/m? terminal entries, * because they will cancel each other out. * On TERMINFO machines, "sa" (sgr) may work. If you want screen * to switch attributes only with sgr, define USE_SGR. * This is *not* recomended, do this only if you must. */ /* #undef USE_SGR */ /* * Define USE_LOCALE if you want screen to use the locale names * for the name of the month and day of the week. */ #define USE_LOCALE /* * Define USE_PAM if your system supports PAM (Pluggable Authentication * Modules) and you want screen to use it instead of calling crypt(). * (You may also need to add -lpam to LIBS in the Makefile.) */ /* #undef USE_PAM */ /* * Define CHECK_SCREEN_W if you want screen to set TERM to screen-w * if the terminal width is greater than 131 columns. No longer needed * on modern systems which use $COLUMNS or the tty settings instead. */ /* #undef CHECK_SCREEN_W */ /********************************************************************** * * End of User Configuration Section * * Rest of this file is modified by 'configure' * Change at your own risk! * */ /* * Some defines to identify special unix variants */ #ifndef SVR4 /* #undef SVR4 */ #endif /* #ifndef __osf__ */ #ifndef MIPS /* #undef MIPS */ #endif /* #endif */ #ifndef OSX /* #undef OSX */ #endif #ifndef ISC /* #undef ISC */ #endif #ifndef sysV68 /* #undef sysV68 */ #endif #ifndef _POSIX_SOURCE /* #undef _POSIX_SOURCE */ #endif /* * Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX). */ #define POSIX 1 /* * Define BSDJOBS if you have BSD-style job control (both process * groups and a tty that deals correctly with them). */ #define BSDJOBS 1 /* * Define TERMIO if you have struct termio instead of struct sgttyb. * This is usually the case for SVID systems, where BSD uses sgttyb. * POSIX systems should define this anyway, even though they use * struct termios. */ #define TERMIO 1 /* * Define CYTERMIO if you have cyrillic termio modes. */ /* #undef CYTERMIO */ /* * Define TERMINFO if your machine emulates the termcap routines * with the terminfo database. * Thus the .screenrc file is parsed for * the command 'terminfo' and not 'termcap'. */ #define TERMINFO 1 /* * If your library does not define ospeed, define this. */ /* #undef NEED_OSPEED */ /* * Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX) */ #ifndef SYSV /* #undef SYSV */ #endif /* * Define SIGVOID if your signal handlers return void. On older * systems, signal returns int, but on newer ones, it returns void. */ #define SIGVOID 1 /* * Define USESIGSET if you have sigset for BSD 4.1 reliable signals. */ /* #undef USESIGSET */ /* * Define SYSVSIGS if signal handlers must be reinstalled after * they have been called. */ /* #undef SYSVSIGS */ /* * Define BSDWAIT if your system defines a 'union wait' in <sys/wait.h> * * Only allow BSDWAIT i.e. wait3 on nonposix systems, since * posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl * */ #ifndef POSIX #define BSDWAIT 1 #endif /* * On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com */ #ifdef BSDWAIT /* #undef USE_WAIT2 */ #endif /* * Define HAVE_DIRENT_H if your system has <dirent.h> instead of * <sys/dir.h> */ #define HAVE_DIRENT_H 1 /* * If your system has getutent(), pututline(), etc. to write to the * utmp file, define GETUTENT. */ #define GETUTENT 1 /* * Define UTHOST if the utmp file has a host field. */ #define UTHOST 1 /* * Define if you have the utempter utmp helper program */ /* #undef HAVE_UTEMPTER */ /* * If ttyslot() breaks getlogin() by returning indexes to utmp entries * of type DEAD_PROCESS, then our getlogin() replacement should be * selected by defining BUGGYGETLOGIN. */ /* #undef BUGGYGETLOGIN */ /* * If your system has the calls setreuid() and setregid(), * define HAVE_SETREUID. Otherwise screen will use a forked process to * safely create output files without retaining any special privileges. */ #define HAVE_SETREUID 1 /* * If your system supports BSD4.4's seteuid() and setegid(), define * HAVE_SETEUID. */ #define HAVE_SETEUID 1 /* * If you want the "time" command to display the current load average * define LOADAV. Maybe you must install screen with the needed * privileges to read /dev/kmem. * Note that NLIST_ stuff is only checked, when getloadavg() is not available. */ #define LOADAV 1 #define LOADAV_NUM 3 #define LOADAV_TYPE double #define LOADAV_SCALE 1 #define LOADAV_GETLOADAVG 1 /* #undef LOADAV_UNIX */ /* #undef LOADAV_AVENRUN */ /* #undef LOADAV_USE_NLIST64 */ /* #undef NLIST_DECLARED */ /* #undef NLIST_STRUCT */ /* #undef NLIST_NAME_UNION */ /* * If your system has the new format /etc/ttys (like 4.3 BSD) and the * getttyent(3) library functions, define GETTTYENT. */ #define GETTTYENT 1 /* * Define USEBCOPY if the bcopy/memcpy from your system's C library * supports the overlapping of source and destination blocks. When * undefined, screen uses its own (probably slower) version of bcopy(). * * SYSV machines may have a working memcpy() -- Oh, this is * quite unlikely. Tell me if you see one. * "But then, memmove() should work, if at all available" he thought... * Boing, never say "works everywhere" unless you checked SCO UNIX. * Their memove fails the test in the configure script. Sigh. (Juergen) */ #define USEBCOPY 1 /* #undef USEMEMCPY */ #define USEMEMMOVE 1 /* * If your system has vsprintf() and requires the use of the macros in * "varargs.h" to use functions with variable arguments, * define USEVARARGS. */ #define USEVARARGS 1 /* * If your system has strerror() define this. */ #define HAVE_STRERROR 1 /* * If the select return value doesn't treat a descriptor that is * usable for reading and writing as two hits, define SELECT_BROKEN. */ /* #undef SELECT_BROKEN */ /* * Define this if your system supports named pipes. */ #define NAMEDPIPE 1 /* * Define this if your system exits select() immediatly if a pipe is * opened read-only and no writer has opened it. */ /* #undef BROKEN_PIPE */ /* * Define this if the unix-domain socket implementation doesn't * create a socket in the filesystem. */ /* #undef SOCK_NOT_IN_FS */ /* * If your system has setenv() and unsetenv() define USESETENV */ #define USESETENV 1 /* * If your system does not come with a setenv()/putenv()/getenv() * functions, you may bring in our own code by defining NEEDPUTENV. */ /* #undef NEEDPUTENV */ /* * If the passwords are stored in a shadow file and you want the * builtin lock to work properly, define SHADOWPW. */ /* #undef SHADOWPW */ /* * If you are on a SYS V machine that restricts filename length to 14 * characters, you may need to enforce that by setting NAME_MAX to 14 */ /* #undef NAME_MAX */ /* KEEP_UNDEF_HERE override system value */ /* #undef NAME_MAX */ /* * define HAVE_RENAME if your system has a rename() function */ #define HAVE_RENAME 1 /* * define HAVE__EXIT if your system has the _exit() call. */ #define HAVE__EXIT 1 /* * define HAVE_LSTAT if your system has symlinks and the lstat() call. */ #define HAVE_LSTAT 1 /* * define HAVE_UTIMES if your system has the utimes() call. */ #define HAVE_UTIMES 1 /* * define HAVE_FCHOWN if your system has the fchown() call. */ #define HAVE_FCHOWN 1 /* * define HAVE_FCHMOD if your system has the fchmod() call. */ #define HAVE_FCHMOD 1 /* * define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib). */ #define HAVE_VSNPRINTF 1 /* * define HAVE_GETCWD if your system has the getcwd() call. */ #define HAVE_GETCWD 1 /* * define HAVE_SETLOCALE if your system has the setlocale() call. */ #define HAVE_SETLOCALE 1 /* * define HAVE_STRFTIME if your system has the strftime() call. */ #define HAVE_STRFTIME 1 /* * define HAVE_NL_LANGINFO if your system has the nl_langinfo() call * and <langinfo.h> defines CODESET. */ #define HAVE_NL_LANGINFO 1 /* * Newer versions of Solaris include fdwalk, which can greatly improve * the startup time of screen; otherwise screen spends a lot of time * closing file descriptors. */ /* #undef HAVE_FDWALK */ /* * define HAVE_DEV_PTC if you have a /dev/ptc character special * device. */ /* #undef HAVE_DEV_PTC */ /* * define HAVE_SVR4_PTYS if you have a /dev/ptmx character special * device and support the ptsname(), grantpt(), unlockpt() functions. */ #define HAVE_SVR4_PTYS 1 /* * define HAVE_GETPT if you have the getpt() function. */ /* #undef HAVE_GETPT */ /* * define HAVE_OPENPTY if your system has the openpty() call. */ /* #undef HAVE_OPENPTY */ /* * define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen * to unusual environments. E.g. For SunOs the defaults are "qpr" and * "0123456789abcdef". For SunOs 4.1.2 * #define PTYRANGE0 "pqrstuvwxyzPQRST" * is recommended by Dan Jacobson. */ #define PTYRANGE0 "pqrstuvw" #define PTYRANGE1 "0123456789abcdef"