#!/usr/bin/make -f
#
# Important modifications (introduction of a saved config.cache to
# solve build problems) introduced in Samba 2.2.1a-5. These
# modification were made by Steve Langasek <vorlon@netexpress.net>.
#
#
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This is the debhelper compatability version to use.
export DH_COMPAT=4
# This has to be exported to make some magic below work.
export DH_OPTIONS
# Set the host and build architectures for use with config.cache loading,
# cross-building, etc.
DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
export DEB_HOST_GNU_TYPE
export DEB_BUILD_GNU_TYPE
# Support the DEB_BUILD_OPTIONS variable
CFLAGS = -gstabs -Wall
INSTALL = install
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O2
endif
ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
INSTALL += -s
endif
DESTDIR=`pwd`/debian/tmp
patch: patch-stamp
patch-stamp:
dh_testdir
if [ ! -f patch-stamp ]; then /bin/sh debian/scripts/patch-source; fi
touch patch-stamp
unpatch:
dh_testdir
if [ -f patch-stamp ]; then /bin/sh debian/scripts/unpatch-source; fi
rm -f patch-stamp
configure: patch-stamp configure-stamp
configure-stamp:
dh_testdir
if [ -f debian/config.cache ]; then \
cp -f debian/config.cache source/config.cache; \
fi
[ -f source/Makefile ] || (cd source && CFLAGS="$(CFLAGS)" ./configure \
--host=$(DEB_HOST_GNU_TYPE) \
--build=$(DEB_BUILD_GNU_TYPE) \
--cache-file=./config.cache \
--with-fhs \
--enable-shared \
--enable-static \
--prefix=/usr \
--sysconfdir=/etc \
--libdir=/etc/samba \
--with-privatedir=/etc/samba \
--with-piddir=/var/run/samba \
--localstatedir=/var \
--with-netatalk \
--with-smbmount \
--with-pam \
--with-syslog \
--with-utmp \
--with-readline \
--with-pam_smbpass \
--with-libsmbclient \
--with-winbind \
--with-msdfs \
--with-automount \
--with-acl-support \
--with-tdbsam \
--with-ldap \
--with-python=python2.3)
touch configure-stamp
build: patch-stamp configure-stamp build-stamp
build-stamp:
dh_testdir
$(MAKE) -C source headers
$(MAKE) -C source all nsswitch/libnss_wins.so python_ext
touch build-stamp
clean: unpatch
dh_testdir
dh_testroot
rm -f build-stamp configure-stamp
# Clean first the Samba package
# -$(MAKE) -C source realclean
# -$(MAKE) -C source clean
-$(MAKE) -C source python_clean distclean
# Delete stuff left after a build that is not deleted by 'make clean'
rm -f source/bin/wbinfo source/bin/winbindd source/bin/debug2html \
source/bin/libsmbclient.a source/include/stamp-h
dh_clean
install: DH_OPTIONS=
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
mkdir -p $(DESTDIR)/usr/share/man $(DESTDIR)/usr/lib \
$(DESTDIR)/lib/security $(DESTDIR)/sbin \
$(DESTDIR)/usr/lib/cups/backend $(DESTDIR)/usr/share/samba \
$(DESTDIR)/etc/pam.d $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d \
$(DESTDIR)/usr/lib/python2.3/site-packages
# Add here commands to install the package into debian/tmp.
$(MAKE) -C source install DESTDIR=$(DESTDIR)
# libsmbclient files are not installed by the standard
# 'make install' - do it manually.
$(MAKE) -C source installclientlib DESTDIR=$(DESTDIR)
mv $(DESTDIR)/usr/lib/libsmbclient.so $(DESTDIR)/usr/lib/libsmbclient.so.0.1
ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/libsmbclient.so.0
ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/libsmbclient.so
# Install other stuff not installed by "make install"
install -m 0755 debian/mksmbpasswd.awk $(DESTDIR)/usr/sbin/mksmbpasswd
# Install winbind stuff not installed by 'make install'
install -m 0644 source/nsswitch/libnss_winbind.so \
$(DESTDIR)/lib/libnss_winbind.so.2
install -m 0644 source/nsswitch/pam_winbind.so \
$(DESTDIR)/lib/security/
# Install libnss_wins.so, which is not installed by 'make install' either.
install -m 0644 source/nsswitch/libnss_wins.so \
$(DESTDIR)/lib/libnss_wins.so.2
# pam_smbpass.so isn't being installed by 'make install'.
# We'll move it here to $(DESTDIR)/lib/security/ and then
# libpam-smbpass.files will make dh_movefiles move it to the
# right location in the libpam-smbpass package.
install -m 0644 source/bin/pam_smbpass.so $(DESTDIR)/lib/security/
# Create the symlinks that will allow us to do "mount -t smbfs ..."
# and "mount -t smb ...". Note that the source/script/installbin.sh
# tries to create the first symlink, but we have commented
# that code out and do everything here. We also create
# symlinks for the man pages.
ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smbfs
ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smb
ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smb.8
ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smbfs.8
# For CUPS to support printing to samba printers, it's necessary
# to make the following symlink (according to
# Erich Schubert <debian@vitavonni.de> in #109509):
ln -s ../../../bin/smbspool $(DESTDIR)/usr/lib/cups/backend/smb
# Install man pages for files without man pages in the upstream sources
install -m 0644 debian/mksmbpasswd.8 $(DESTDIR)/usr/share/man/man8/mksmbpasswd.8
# We don't provide the "Using Samba" book in the swat package.
# It's provided in the samba-doc package so in the swat package
# we just provide a symlink to the real book.
ln -s ../../doc/samba-doc/htmldocs/using_samba \
$(DESTDIR)/usr/share/samba/swat/using_samba
# Delete unwanted stuff leftover from "make install"
# The smbwrapper package is not being generated anymore, so we must
# delete the related man pages.
rm $(DESTDIR)/usr/share/man/man1/smbsh.1
# We're not providing findsmb (should we?) so let's remove the man
# pages.
find debian/ -name 'findsmb*' -exec rm -f {} \;
# Install samba-common's conffiles - they'll get moved later to their
# correct place by dh_movefiles.
cp debian/smb.conf $(DESTDIR)/usr/share/samba/
install -m755 debian/panic-action $(DESTDIR)/usr/share/samba/
cp debian/gdbcommands $(DESTDIR)/etc/samba/
cp debian/samba.pamd $(DESTDIR)/etc/pam.d/samba
install -m755 debian/samba-common.dhcp $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d/samba
# Install the Python modules
#
# Hmmm... need to figure this out. We have lib.linux-i686-2.2
# and lib.linux-i686-2.3 directories. Using only the stuff from
# the 2.3 directory for now. peloy.-
#cp source/build/lib.*/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/
cp source/build/lib.linux-*-2.3/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/
dh_movefiles
# Build architecture-independent files here.
# Pass -i to all debhelper commands in this target to reduce clutter.
binary-indep: DH_OPTIONS=-i
binary-indep: build install
dh_testdir
dh_testroot
dh_installdebconf
dh_installdocs -A debian/README.build
# dh_installexamples is not available in Debian Potato...
[ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -psamba-doc examples/*
# dh_installmenu
# dh_installemacsen
# dh_installpam
# dh_installinit
# dh_installcron
# dh_installmanpages
# dh_installinfo
# dh_undocumented
dh_installchangelogs
dh_link
dh_compress
dh_fixperms
# Get rid of those pesky .cvsignore files to make lintian happy
find debian/ -name .cvsignore -exec rm -f {} \;
dh_installdeb
# dh_perl
dh_gencontrol
dh_md5sums
dh_builddeb
# Build architecture-dependent files here.
# Pass -a to all debhelper commands in this target to reduce clutter.
binary-arch: DH_OPTIONS=-a
binary-arch: build install
dh_testdir
dh_testroot
dh_installdebconf
dh_installdocs -A debian/README.build
# dh_installexamples is not available in Debian Potato...
[ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -ppython2.3-samba source/python/examples/*
# dh_installmenu
# dh_installlogrotate is not available in Debian Potato...
if [ -x /usr/bin/dh_installlogrotate ]; then \
dh_installlogrotate; \
else \
mkdir -p debian/samba/etc/logrotate.d; \
cp debian/samba.logrotate debian/samba/etc/logrotate.d/samba; \
mkdir -p debian/winbind/etc/logrotate.d; \
cp debian/winbind.logrotate debian/winbind/etc/logrotate.d/winbind; \
fi
# dh_installemacsen
# dh_installpam
DH_OPTIONS= dh_installinit -psamba -- "defaults 20 19"
DH_OPTIONS= dh_installinit -pwinbind
dh_installcron
# dh_installmanpages
# dh_installinfo
cp debian/winbind.lintian debian/winbind/usr/share/lintian/overrides/winbind
# dh_undocumented
dh_installchangelogs -Nlibpam-smbpass
DH_OPTIONS= dh_installchangelogs -plibpam-smbpass source/pam_smbpass/CHANGELOG
dh_strip
dh_link
dh_compress
dh_fixperms
# Why this is executable, I have NO idea...
chmod a-x debian/libsmbclient-dev/usr/include/libsmbclient.h
# You may want to make some executables suid here.
# The smbmnt and smbumount binaries should be setuid-root. This
# has security implications because these programs haven't had
# a thorough security audit. smbmount _does not_ have to have
# the setuid bit set. In fact, it is a security hole.
chmod u+s debian/smbfs/usr/bin/smbmnt
chmod u+s debian/smbfs/usr/bin/smbumount
# Set some reasonable default perms for the samba logdir.
chmod 0750 debian/samba/var/log/samba/
chown root.adm debian/samba/var/log/samba/
# Get rid of those pesky .cvsignore files to make lintian happy
# (maybe we only need the "find ... -exec rm -f {} ;" we have
# in the binary-indep target?) peloy.-
find debian/ -name .cvsignore -exec rm -f {} \;
dh_installdeb
# dh_makeshlibs
# dh_perl
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install configure