VxWorks port of NTP

Creating a port for vxWorks posed some problems. This port may help as a starting point for similar ports to real-time OS's and other embeddable kernels, particularly where main() is not allowed, and where the configure scripts need to be altered.

Configuration issues

I decided to do as little invasive surgery as possible on the NTP code, so I brought the vxWorks header tree in line with the standard Unix tree. The following changes were needed, as a side effect these changes will allow for easy porting of other autoconfigure enabled code.

Where I have 386 you will need to put in your target type. The vxWorks tree entry point is /usr/wind. If these are the same for your system, you should be able to cut and paste the changes.

WARNING: Check you are not overwriting files, before entering the following: there should be no conflict, but check first...

            export CC="cc386 -nostdlib -m486 -DCPU=I80486 -I/usr/wind/target/h"
            export RANLIB=ranlib386
            export AR=ar386
            export VX_KERNEL=/usr/wind/target/config/ims_std_bsp/vxWorks
cd /usr/wind/target/sys ln -s ../signal.h ln -s ../time.h ln -s socket.h sockio.h ln -s ../selectLib.h select.h ln -s ../timers.h touch file.h param.h resource.h utsname.h var.h ../netdb.h ../a.out.h ../termios.h echo " ******ADD #include \"sys/times.h\" to sys/time.h "
The configure script must be changed in the following way to get the linking tests to work, once in the correct directory issue the following commands:
      sed -e 's%main.*()%vxmain()%' configure > configure.vxnew
            mv configure.vxnew configure
            chmod 755 configure
      

The new version 4 of NTP requires some maths functions so it links in the maths library (-lm) in the ./ntpd/Makefile.am file change the line ntpd_LDADD = $(LDADD) -lm by removing the "-lm".

>You are now ready to compile

The ./configure.in file needed to be altered to allow for a host-target configuration to take place.

Unfortunately I have had to make use of the ./include/ntp_machine.h file to add in the checks that would have been checked at linking stage by autoconf, a better method should be devised.

Unfortunately there are still quite a few SYS_VXWORKS type defines in the source, but I have eliminated as many as possible. You have the choice of using the usrtime.a library avaliable from the vxworks archives or forgoing adjtime() and using the clock_[get|set]time(). The ./include/ntp_machine.h file clearly marks how to do this.

Compilation issues

You will need autoconf and automake ... available free from the gnu archives worldwide.

The variable arch is the target architecture (e.g. i486)

            mkdir A.vxworks)
            cd A.vxworks
            ../configure --target=arch-wrs-vxworks
            make
       

Options I normally use are the --disable-all-clocks --enable-LOCAL-CLOCK flags. The program should proceed to compile without problem. The daemon ntpd, ntpdate, ntptrace, ntpdc, ntpq programs and of course the libraries are all fully ported. The other utilities are not, but they should be easy to port.

Running the software

Load in the various files, call them in the normal vxWorks function type manner. Here are some examples. Refer to the man pages for further information.

            ld < ntpdate/ntpdate
            ld < ntpd/ntpd
            ld < ntptrace/ntptrace
            ld < ntpq/ntpq
            ld < ntpdc/ntpdc
            ntpdate ("-b", "192.168.0.245")
            sp(ntpd, "-c", "/export/home/casey/ntp/ntp.conf")
            ntpdc("-c", "monlist", "192.168.0.244")
            ntpq("-c", "peers", "192.168.0.244")
            ntptrace("192.168.0.244")
        

Casey Crellin, casey@csc.co.za