Compilation: Usual thing: rm -f Config.local ; make for vanilla make refconf for reference clock (e. g. DCF77) Directory contents: hints/PARSE - this file xntpd/refclock_parse.c - reference clock support for DCF77/GPS in xntp parse/parse.c - Reference clock data parser framework parse/parse_conf.c - parser configuration (clock types) parse/clk_meinberg.c - Meinberg clock formats (DCF U/A 31, PZF 535, GPS166) parse/clk_schmid.c - Schmid receiver (DCF77) parse/clk_rawdcf.c - 100/200ms pulses via 50 Baud line (DCF77) parse/clk_dcf7000.c - ELV DCF7000 (DCF77) parse/clk_trimble.c - Trimble SV6 GPS receiver If you want to add new clock types please check with kardel@informatik.uni-erlangen.de. These files implement the conversion of RS232 data streams into timing information used by refclock_parse.c which is mostly generic except for NTP configuration constants. parse/Makefile.kernel - *SIMPLE* makefile to build a loadable STREAMS module for SunOS 4.x / SunOS 5.x systems parse/parsestreams.c - SUN Streams module (loadable) for radio clocks This streams module is designed for SunOS 4.1.X. parse/parsesolaris.c - SUN Streams module (loadable) for radio clocks. This streams module is designed for SunOS 5.x Beware this is still new - so it might crash your machine (we have seen it working, though). parse/parsetest.c - simple test program for STREAMS module. Its so simple, that it doesn't even set TTY-modes, thus they got to be correct on startup - works for Meinberg receivers parse/testdcf.c - test program for raw DCF77 (100/200ms pulses) receivers include/parse.h - interface to "parse" module and more include/parse_conf.h - interface to "parse" configuration include/sys/parsestreams.h - STREAMS specific definitions scripts/support - scripts (perl & sh) for statistics and rc startup the startup scripts are used in Erlangen for starting the daemon on a variety of Suns and HPs and for Reference Clock startup on Suns These scripts may or may not be helpful to you. Supported clocks: Meinberg DCF U/A 31 Meinberg PZF535/TCXO (Software revision PZFUERL 4.6) Meinberg PZF535/OCXO (Software revision PZFUERL 4.6) Meinberg GPS166 (Software version for Uni-Erlangen) ELV DCF7000 (not recommended - casual/emergency use only) Conrad DCF77 receiver (email: time@informatik.uni-erlangen.de) + level converter TimeBrick (email: time@informatik.uni-erlangen.de) Schmid Receiver Kit Trimble SV6 GPS receiver Addresses: Meinberg Funkuhren Auf der Landwehr 22 31812 Bad Pyrmont Germany Tel.: 05281/20 18 FAX: 05281/60 81 80 ELV Kundenservice Postfach 1000 26787 Leer Germany Tel.: 0491/60 08 88 Walter Schmidt Eichwisrain 14 8634 Hombrechtikon Switzerland If you have problems mail to: time@informatik.uni-erlangen.de We'll help (conditions permitting)