Compilation:
Usual thing: rm -f Config.local ; make for vanilla
make refconf for reference clock (e. g. DCF77)
Directory contents:
hints/PARSE - this file
xntpd/refclock_parse.c
- reference clock support for DCF77/GPS in xntp
parse/parse.c
- Reference clock data parser framework
parse/parse_conf.c
- parser configuration (clock types)
parse/clk_meinberg.c
- Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)
parse/clk_schmid.c
- Schmid receiver (DCF77)
parse/clk_rawdcf.c
- 100/200ms pulses via 50 Baud line (DCF77)
parse/clk_dcf7000.c
- ELV DCF7000 (DCF77)
parse/clk_trimble.c
- Trimble SV6 GPS receiver
If you want to add new clock types please check
with kardel@informatik.uni-erlangen.de. These files
implement the conversion of RS232 data streams into
timing information used by refclock_parse.c which is
mostly generic except for NTP configuration constants.
parse/Makefile.kernel
- *SIMPLE* makefile to build a loadable STREAMS
module for SunOS 4.x / SunOS 5.x systems
parse/parsestreams.c
- SUN Streams module (loadable) for radio clocks
This streams module is designed for SunOS 4.1.X.
parse/parsesolaris.c
- SUN Streams module (loadable) for radio clocks.
This streams module is designed for SunOS 5.x
Beware this is still new - so it might crash
your machine (we have seen it working, though).
parse/parsetest.c
- simple test program for STREAMS module. Its so simple,
that it doesn't even set TTY-modes, thus they got to
be correct on startup - works for Meinberg receivers
parse/testdcf.c
- test program for raw DCF77 (100/200ms pulses)
receivers
include/parse.h - interface to "parse" module and more
include/parse_conf.h
- interface to "parse" configuration
include/sys/parsestreams.h
- STREAMS specific definitions
scripts/support
- scripts (perl & sh) for statistics and rc startup
the startup scripts are used in Erlangen for
starting the daemon on a variety of Suns and HPs
and for Reference Clock startup on Suns
These scripts may or may not be helpful to you.
Supported clocks:
Meinberg DCF U/A 31
Meinberg PZF535/TCXO (Software revision PZFUERL 4.6)
Meinberg PZF535/OCXO (Software revision PZFUERL 4.6)
Meinberg GPS166 (Software version for Uni-Erlangen)
ELV DCF7000 (not recommended - casual/emergency use only)
Conrad DCF77 receiver (email: time@informatik.uni-erlangen.de)
+ level converter
TimeBrick (email: time@informatik.uni-erlangen.de)
Schmid Receiver Kit
Trimble SV6 GPS receiver
Addresses:
Meinberg Funkuhren
Auf der Landwehr 22
31812 Bad Pyrmont
Germany
Tel.: 05281/20 18
FAX: 05281/60 81 80
ELV Kundenservice
Postfach 1000
26787 Leer
Germany
Tel.: 0491/60 08 88
Walter Schmidt
Eichwisrain 14
8634 Hombrechtikon
Switzerland
If you have problems mail to:
time@informatik.uni-erlangen.de
We'll help (conditions permitting)