hopf PCI-Bus Receiver (6039 GPS/DCF77)


Synopsis

Address:  
127.127.39.X
Reference ID:  
.hopf. (default), GPS, DCF
Driver ID:  
HOPF_P

Description

The refclock_hopf_pci driver supports the hopf PCI-bus interface 6039 GPS/DCF77.
Additional software and information about the software drivers maybe available from: http://www.ATLSoft.de/ntp.
Latest NTP driver source, executables and documentation is maintained at: http://www.ATLSoft.de/ntp

Operating System Compatibility

The hopf clock driver has been tested on the following software and hardware platforms:
 

Platform

Operating System

i386 (PC) 

Linux

i386 (PC) 

Windows NT

i386 (PC) 

Windows 2000


O/S System Configuration

UNIX

The driver attempts to open the device /dev/hopf6039 . The device entry will be made by the installation process of the kernel module for the PCI-bus board. The driver sources belongs to the delivery equipment of the PCI-board.

Windows NT/2000

The driver attempts to open the device by calling the function "OpenHopfDevice()". This function will be installed by the Device Driver for the PCI-bus board. The driver belongs to the delivery equipment of the PCI-board.


Fudge Factors

refid string
Specifies the driver reference identifier, GPS or DCF.
flag1 0 | 1
When set to 1, driver sync's even if only crystal driven.

Questions or Comments:

Bernd Altmeier
Ing.-B’ro f’r Software www.ATLSoft.de

(last updated 03/02/2001)