Contributed by David Champion See also ../README.SENDMAIL What? ----- Mm-handler is a mail delivery agent (MDA) -- a "mailer", in Sendmail lingo. Its function is to assume authority for messages destined to Mailman lists, so that they're off sendmail's hands, and you (the site administrator) don't need to maintain databases of aliases and such. It takes a small bit of work to set up, but once that's done, you'll never need to mess with aliases for Mailman's sake again. When? ----- The only further catch is that mm-handler is only really useful when it mostly "owns" its mail domain (the hostname part after an e-mail address's "@" symbol) -- when you can dedicate the mail domain to Mailman. If you have a limited set of exceptions -- a few users, for example -- you can still use it, but for sites with a dynamic or even mix of users (or forwarders) and lists, it might not gain you much. How do you know whether mm-handler is appropriate for you? Let's look at some examples. If you're running lists off your primary DNS domain name, you probably have a mix of lists and users in your namespace. Take python.org, for example: it hosts Mailman lists, and it hosts users' personal accounts. There aren't a whole bunch of either, but the ratio is probably fairly near 1:1. Mm-handler is not very useful here, because there's no simple way to separate user addresses from list addresses -- not to mention that mm-handler is written in perl, so that's just bad form. This begs two different, complementary situations. A hypothetical domain, incidents.int, is used mostly for mailing lists. It's a front-end site, and not a general user mail service. There might be a couple of user addresses -- system administrators and such -- but these are few in number and easily adjusted manually by the site administrator. The 250 mailing lists at the site are much more dynamic, and a much bigger pain to keep track of by editing an alias file. This site can easily benefit from mm-handler. Inversely, mail.aero, another hypothetical domain, provides POP mail service to employees of the aerospace industry. Its addresses are almost entirely users, although it maintains a few mailing lists for convenience. This site has nothing to gain from mm-handler. It's much easier to maintain an alias file of 10 lists than to dedicate the domain to Mailman, and put all 10,000 aerospace workers in a user table. Those are the trickier cases. The case where mm-handler really works best is when you can dedicate a single hostname under your DNS domain to mailing lists, and host no user accounts there. At the University of Chicago, we do this with listhost.uchicago.edu. SourceForge does this, too, although I don't believe they use Sendmail. If your site is like that, you should read on. How? ---- Set-up isn't all that complicated. I've included a file here called "mailman.mc". This is the m4 file that I use on my list server, and you can likely use it with few changes at your site. It's well-annotated; the rationale for each parameter (or set of parameters) is provided in m4 (ahem) comments. So, the simple steps are as follows: 1. Copy mailman.mc, and make any changes you need at your site. You DEFINITELY need some changes. There are hostnames in there that you need to adjust, and chances are that you'll need to change some other parameters (like the host OS), too. [1] 2. Install mm-handler. Because my server's sendmail-related files live in /etc/mail, I keep mm-handler there, too. YMMV. 3. Edit mm-handler, and make any changes you need at your site. You probably want to change $MMWRAPPER and $MMLISTDIR at line 14, and you *might* want to take a look at the helpful boilerplate text beginning at line 64. (This text is sent whenever someone tries to send mail to a nonexistent list address on your mail domain.) 4. You should set up a virtusertable. (See mailman.mc for an explanation.) There's an example of a good, minimal virtusertable in this distribution. The virtusertable begins as a text file named "virtusertable", stored in the same directory as all the other Sendmail files, but it's converted to a map file for Sendmail's use. Install the virtusertable, and (re)make the map file. [2] 5. You absolutely must have a mailertable, or all of this goes nowhere. Like virtusertable, the mailertable is a map that begins as text and gets converted. It's named "mailertable", and it's probably pretty simple. Mine looks like this: listtest.uchicago.edu mailman:listtest.uchicago.edu This says: assign all incoming mail (that was not intercepted by the virtusertable) and that is in the listtest.uchicago.edu domain to the "mailman" mailer, and tell the "mailman" mailer that the hostname we're using is "listtest.uchicago.edu". You can support multiple virtual hosts using mm-handler just by placing corresponding lines in mailertable. Be sure to make this map, too! 6. The mailer definition (see the end of mailman.mc, or your own .mc file) for mm-handler sets the user/group that mm-handler will run under. (I use mailman:other.) Be sure that mm-handler is executable by this user or group. You almost certainly need the user to be the same as the Mailman user, and this user is almost always called "mailman", so you probably shouldn't change the defaults. 7. Generate your new sendmail.cf file. See the sendmail documentation if you're not familiar with this procedure. [1] 8. Stop sendmail on your list server, if you haven't already. Install the new sendmail.cf file wherever your sendmail.cf file belongs. (This depends on how sendmail was compiled, but most systems support using /etc/sendmail.cf.) 9. Cross your fingers and restart sendmail. A. Barry warns that Mailman now needs you to modify your Mailman/mm_cfg.py file, adding this line: MTA = None This tells Mailman that it doesn't need to do anything special when it creates or deletes mailing lists through the web. For more information, take a look at the comments for this variable in your Defaults.py file (but never edit this file -- always edit mm_cfg.py instead!). That's it! With any luck, you're fully functional. -- [1] The .mc file is the standard, supported way of configuring sendmail. I'm not going to get into this here, and I'm not going to tell you how to write raw sendmail.cf stuff, because if you need to do it this way then you need something more comprehensive than I can provide. If you need help with the .mc -> .cf process, I recommend these links: http://www.sendmail.org/~ca/email/setup1.html http://www.sendmail.org/~ca/email/doc8.9/README.cf.html http://www.hserus.net/sendmail.html [2] This is often done with something like "makemap hash /etc/virtusertable