# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ############################################################################## ### WARNING: this file contains embedded tabs. Do not run untabify on this file. sinclude(config/acx.m4) AC_INIT(move-if-change) AC_PREREQ(2.13) AC_CANONICAL_SYSTEM AC_ARG_PROGRAM # Get 'install' or 'install-sh' and its variants. AC_PROG_INSTALL ACX_PROG_LN AC_PROG_LN_S ### we might need to use some other shell than /bin/sh for running subshells ### If we are on Windows, search for the shell. This will permit people ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure ### without also having to set CONFIG_SHELL. This code will work when ### using bash, which sets OSTYPE. case "${OSTYPE}" in *win32*) if test x${CONFIG_SHELL} = x ; then if test ! -f /bin/sh ; then if test x${SHELL} != x && test -f ${SHELL} ; then CONFIG_SHELL=${SHELL} export CONFIG_SHELL else for prog in sh sh.exe bash bash.exe; do IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" for dir in $PATH; do test -z "$dir" && dir=. if test -f $dir/$prog; then CONFIG_SHELL=$dir/$prog export CONFIG_SHELL break fi done IFS="$save_ifs" test -n "${CONFIG_SHELL}" && break done fi fi fi ;; esac config_shell=${CONFIG_SHELL-/bin/sh} progname=$0 # if PWD already has a value, it is probably wrong. if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi # Export original configure arguments for use by sub-configures. These # will be expanded by make, so quote '$'. tmp="$progname $@" sed -e 's,\$,$$,g' < conftestsed.out $tmp EOF_SED TOPLEVEL_CONFIGURE_ARGUMENTS=`cat conftestsed.out` rm -f conftestsed.out AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS) moveifchange=${srcdir}/move-if-change srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}` # We pass INSTALL explicitly to sub-makes. Make sure that it is not # a relative path. if test "$INSTALL" = "${srcdir}/install-sh -c"; then INSTALL="${srcpwd}/install-sh -c" fi # Set srcdir to "." if that's what it is. # This is important for multilib support. pwd=`${PWDCMD-pwd}` if test "${pwd}" = "${srcpwd}" ; then srcdir=. fi topsrcdir=$srcpwd extra_host_args= ### To add a new directory to the tree, first choose whether it is a target ### or a host dependent tool. Then put it into the appropriate list ### (library or tools, host or target), doing a dependency sort. # Subdirs will be configured in the order listed in build_configdirs, # configdirs, or target_configdirs; see the serialization section below. # Dependency sorting is only needed when *configuration* must be done in # a particular order. In all cases a dependency should be specified in # the Makefile, whether or not it's implicitly specified here. # Double entries in build_configdirs, configdirs, or target_configdirs may # cause circular dependencies and break everything horribly. # these library is used by various programs built for the build # environment # build_libs="build-libiberty" # these tools are built for the build environment build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes" # these libraries are used by various programs built for the host environment # host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber" # these tools are built for the host environment # Note, the powerpc-eabi build depends on sim occurring before gdb in order to # know that we are building the simulator. # binutils, gas and ld appear in that order because it makes sense to run # "make check" in that particular order. host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools" # libgcj represents the runtime libraries only used by gcj. libgcj="target-libffi \ target-zlib \ target-qthreads \ target-libjava" # these libraries are built for the target environment, and are built after # the host libraries and the host tools (which may be a cross compiler) # target_libraries="target-libiberty \ target-libgloss \ target-newlib \ target-libstdc++-v3 \ target-libmudflap \ target-libssp \ target-libgfortran \ target-boehm-gc \ ${libgcj} \ target-libobjc \ target-libada \ target-libgomp" # these tools are built using the target libraries, and are intended to # run only in the target environment # # note: any program that *uses* libraries that are in the "target_libraries" # list belongs in this list. those programs are also very likely # candidates for the "native_only" list which follows # target_tools="target-examples target-groff target-gperf target-rda" ################################################################################ ## All tools belong in one of the four categories, and are assigned above ## We assign ${configdirs} this way to remove all embedded newlines. This ## is important because configure will choke if they ever get through. ## ${configdirs} is directories we build using the host tools. ## ${target_configdirs} is directories we build using the target tools. configdirs=`echo ${host_libs} ${host_tools}` target_configdirs=`echo ${target_libraries} ${target_tools}` build_configdirs=`echo ${build_libs} ${build_tools}` ################################################################################ srcname="gnu development package" # This gets set non-empty for some net releases of packages. appdirs="" # Define is_cross_compiler to save on calls to 'test'. is_cross_compiler= if test x"${host}" = x"${target}" ; then is_cross_compiler=no else is_cross_compiler=yes fi # Find the build and target subdir names. GCC_TOPLEV_SUBDIRS # Skipdirs are removed silently. skipdirs= # Noconfigdirs are removed loudly. noconfigdirs="" use_gnu_ld= # Make sure we don't let GNU ld be added if we didn't want it. if test x$with_gnu_ld = xno ; then use_gnu_ld=no noconfigdirs="$noconfigdirs ld" fi use_gnu_as= # Make sure we don't let GNU as be added if we didn't want it. if test x$with_gnu_as = xno ; then use_gnu_as=no noconfigdirs="$noconfigdirs gas" fi # some tools are so dependent upon X11 that if we're not building with X, # it's not even worth trying to configure, much less build, that tool. case ${with_x} in yes | "") ;; # the default value for this tree is that X11 is available no) skipdirs="${skipdirs} tk itcl libgui" # We won't be able to build gdbtk without X. enable_gdbtk=no ;; *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;; esac # Some tools are only suitable for building in a "native" situation. # Remove these if host!=target. native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf" # Similarly, some are only suitable for cross toolchains. # Remove these if host=target. cross_only="target-libgloss target-newlib target-opcodes" case $is_cross_compiler in no) skipdirs="${skipdirs} ${cross_only}" ;; yes) skipdirs="${skipdirs} ${native_only}" ;; esac # If both --with-headers and --with-libs are specified, default to # --without-newlib. if test x"${with_headers}" != x && test x"${with_headers}" != xno \ && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then if test x"${with_newlib}" = x ; then with_newlib=no fi fi # Recognize --with-newlib/--without-newlib. case ${with_newlib} in no) skipdirs="${skipdirs} target-newlib" ;; yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;; esac # Configure extra directories which are host specific case "${host}" in *-cygwin*) configdirs="$configdirs libtermcap" ;; esac # A target can indicate whether a language isn't supported for some reason. # Only spaces may be used in this macro; not newlines or tabs. unsupported_languages= # Remove more programs from consideration, based on the host or # target this usually means that a port of the program doesn't # exist yet. case "${host}" in hppa*64*-*-*) noconfigdirs="$noconfigdirs byacc" ;; i[[3456789]]86-*-vsta) noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext" ;; i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*) noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi" ;; i[[3456789]]86-*-mingw32*) # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv" noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib" ;; i[[3456789]]86-*-beos*) noconfigdirs="$noconfigdirs tk itcl libgui gdb" ;; *-*-cygwin*) noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl" ;; *-*-netbsd*) noconfigdirs="$noconfigdirs rcs" ;; ppc*-*-pe) noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv" ;; powerpc-*-beos*) noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline" ;; esac AC_ARG_ENABLE(libada, [ --enable-libada Builds libada directory], ENABLE_LIBADA=$enableval, ENABLE_LIBADA=yes) if test "${ENABLE_LIBADA}" != "yes" ; then noconfigdirs="$noconfigdirs gnattools" fi AC_ARG_ENABLE(libssp, [ --enable-libssp Builds libssp directory], ENABLE_LIBSSP=$enableval, ENABLE_LIBSSP=yes) # Save it here so that, even in case of --enable-libgcj, if the Java # front-end isn't enabled, we still get libgcj disabled. libgcj_saved=$libgcj case $enable_libgcj in yes) # If we reset it here, it won't get added to noconfigdirs in the # target-specific build rules, so it will be forcibly enabled # (unless the Java language itself isn't enabled). libgcj= ;; no) # Make sure we get it printed in the list of not supported target libs. noconfigdirs="$noconfigdirs ${libgcj}" ;; esac # Disable libmudflap on some systems. if test x$enable_libmudflap = x ; then case "${target}" in *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu) # Enable libmudflap by default in GNU and friends. ;; *-*-freebsd*) # Enable libmudflap by default in FreeBSD. ;; *) # Disable it by default everywhere else. noconfigdirs="$noconfigdirs target-libmudflap" ;; esac fi # Disable libgomp on non POSIX hosted systems. if test x$enable_libgomp = x ; then # Enable libgomp by default on hosted POSIX systems. case "${target}" in *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu) ;; *-*-netbsd* | *-*-freebsd* | *-*-openbsd*) ;; *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*) ;; *-*-darwin* | *-*-aix*) ;; *) noconfigdirs="$noconfigdirs target-libgomp" ;; esac fi case "${target}" in *-*-chorusos) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; # APPLE LOCAL begin ARM darwin target arm-*-darwin*) noconfigdirs="$noconfigdirs target-libgomp target-libobjc" noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libssp" # LLVM LOCAL begin noconfigdirs="$noconfigdirs target-boehm-gc target-libffi" noconfigdirs="$noconfigdirs target-libjava" noconfigdirs="$noconfigdirs target-libmudflap target-zlib" # LLVM LOCAL end ;; # APPLE LOCAL end ARM darwin target powerpc-*-darwin* | i[[3456789]]86-*-darwin*) noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof" noconfigdirs="$noconfigdirs sim target-rda" # LLVM LOCAL begin noconfigdirs="$noconfigdirs target-boehm-gc target-libffi" noconfigdirs="$noconfigdirs target-libjava" noconfigdirs="$noconfigdirs target-libmudflap target-libobjc" noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-zlib" # LLVM LOCAL end ;; *-*-darwin*) noconfigdirs="$noconfigdirs ld gas gdb gprof" noconfigdirs="$noconfigdirs sim target-rda" noconfigdirs="$noconfigdirs ${libgcj}" # LLVM LOCAL begin noconfigdirs="$noconfigdirs target-boehm-gc target-libffi" noconfigdirs="$noconfigdirs target-libjava" noconfigdirs="$noconfigdirs target-libmudflap target-libobjc" noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-zlib" # LLVM LOCAL end ;; *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; *-*-freebsd*) noconfigdirs="$noconfigdirs target-newlib target-libgloss" if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \ && test -f /usr/local/include/gmp.h; then with_gmp=/usr/local fi # Skip some stuff that's unsupported on some FreeBSD configurations. case "${target}" in i*86-*-*) ;; alpha*-*-*) ;; *) noconfigdirs="$noconfigdirs ${libgcj}" ;; esac ;; *-*-kaos*) # Remove unsupported stuff on all kaOS configurations. skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx" skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf" skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib" noconfigdirs="$noconfigdirs target-libgloss" ;; *-*-netbsd*) # Skip some stuff on all NetBSD configurations. noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss" # Skip some stuff that's unsupported on some NetBSD configurations. case "${target}" in i*86-*-netbsdelf*) ;; arm*-*-netbsdelf*) ;; *) noconfigdirs="$noconfigdirs ${libgcj}" ;; esac ;; *-*-netware*) noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap" ;; *-*-rtems*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; # The tpf target doesn't support gdb yet. *-*-tpf*) noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl" ;; *-*-uclinux*) noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}" ;; *-*-vxworks*) noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}" ;; alpha*-dec-osf*) # ld works, but does not support shared libraries. # newlib is not 64 bit ready. I'm not sure about fileutils. # gas doesn't generate exception information. noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss" ;; alpha*-*-*vms*) noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}" ;; alpha*-*-linux*) # newlib is not 64 bit ready noconfigdirs="$noconfigdirs target-newlib target-libgloss" ;; alpha*-*-*) # newlib is not 64 bit ready noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; am33_2.0-*-linux*) noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" ;; sh-*-linux*) noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" ;; sh*-*-pe|mips*-*-pe|*arm-wince-pe) noconfigdirs="$noconfigdirs ${libgcj}" noconfigdirs="$noconfigdirs target-examples" noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr" noconfigdirs="$noconfigdirs tcl tk itcl libgui sim" noconfigdirs="$noconfigdirs expect dejagnu" # the C++ libraries don't build on top of CE's C libraries noconfigdirs="$noconfigdirs target-libstdc++-v3" noconfigdirs="$noconfigdirs target-newlib" case "${host}" in *-*-cygwin*) ;; # keep gdb and readline *) noconfigdirs="$noconfigdirs gdb readline" ;; esac ;; arc-*-*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; arm-semi-aof ) ;; arm-*-coff | strongarm-*-coff | xscale-*-coff) noconfigdirs="$noconfigdirs ${libgcj}" ;; arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* ) noconfigdirs="$noconfigdirs target-libffi target-qthreads" ;; arm*-*-linux-gnueabi) noconfigdirs="$noconfigdirs target-libffi target-qthreads" noconfigdirs="$noconfigdirs target-libjava target-libobjc" ;; arm*-*-symbianelf*) noconfigdirs="$noconfigdirs ${libgcj} target-libiberty" ;; arm-*-pe*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; thumb-*-coff) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; thumb-*-elf) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; thumb-*-pe) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; arm-*-riscix*) noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}" ;; avr-*-*) noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" ;; bfin-*-*) noconfigdirs="$noconfigdirs gdb" if test x${is_cross_compiler} != xno ; then target_configdirs="${target_configdirs} target-bsp target-cygmon" fi ;; c4x-*-* | tic4x-*-*) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" ;; c54x*-*-* | tic54x-*-*) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib" ;; cris-*-* | crisv32-*-*) unsupported_languages="$unsupported_languages java" case "${target}" in *-*-aout) unsupported_languages="$unsupported_languages fortran" noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";; *-*-elf) unsupported_languages="$unsupported_languages fortran" noconfigdirs="$noconfigdirs target-boehm-gc";; *-*-linux*) noconfigdirs="$noconfigdirs target-newlib target-libgloss";; *) unsupported_languages="$unsupported_languages fortran" noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";; esac ;; crx-*-*) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}" ;; d10v-*-*) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" ;; d30v-*-*) noconfigdirs="$noconfigdirs ${libgcj} gdb" ;; fr30-*-elf*) noconfigdirs="$noconfigdirs ${libgcj} gdb" ;; frv-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; h8300*-*-*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; h8500-*-*) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" ;; hppa1.1-*-osf* | hppa1.1-*-bsd* ) ;; hppa*64*-*-linux* | parisc*64*-*-linux*) # In this case, it's because the hppa64-linux target is for # the kernel only at this point and has no libc, and thus no # headers, crt*.o, etc., all of which are needed by these. noconfigdirs="$noconfigdirs target-zlib" ;; parisc*-*-linux* | hppa*-*-linux*) ;; hppa*-*-*elf* | \ hppa*-*-lites* | \ hppa*-*-openbsd* | \ hppa*64*-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; hppa*-hp-hpux11*) noconfigdirs="$noconfigdirs ld shellutils" ;; hppa*-*-*) # According to Alexandre Oliva , libjava won't # build on HP-UX 10.20. noconfigdirs="$noconfigdirs ld shellutils ${libgcj}" ;; i960-*-*) noconfigdirs="$noconfigdirs ${libgcj} gdb" ;; ia64*-*-elf*) # No gdb support yet. noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb" ;; ia64*-**-hpux*) # No gdb or ld support yet. noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld" ;; i370-*-opened*) ;; i[[3456789]]86-*-coff | i[[3456789]]86-*-elf) noconfigdirs="$noconfigdirs ${libgcj}" ;; i[[3456789]]86-*-linux*) # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's # not build java stuff by default. case "${target}" in *-*-*libc1*) noconfigdirs="$noconfigdirs ${libgcj}";; esac # This section makes it possible to build newlib natively on linux. # If we are using a cross compiler then don't configure newlib. if test x${is_cross_compiler} != xno ; then noconfigdirs="$noconfigdirs target-newlib" fi noconfigdirs="$noconfigdirs target-libgloss" # If we are not using a cross compiler, do configure newlib. # Note however, that newlib will only be configured in this situation # if the --with-newlib option has been given, because otherwise # 'target-newlib' will appear in skipdirs. ;; i[[3456789]]86-*-mingw32*) target_configdirs="$target_configdirs target-winsup" noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}" ;; *-*-cygwin*) target_configdirs="$target_configdirs target-libtermcap target-winsup" noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}" # always build newlib if winsup directory is present. if test -d "$srcdir/winsup/cygwin"; then skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` elif test -d "$srcdir/newlib"; then echo "Warning: winsup/cygwin is missing so newlib can't be built." fi ;; i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \ i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* ) ;; i[[3456789]]86-*-pe) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" ;; i[[3456789]]86-*-sco3.2v5*) # The linker does not yet know about weak symbols in COFF, # and is not configured to handle mixed ELF and COFF. noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}" ;; i[[3456789]]86-*-sco*) noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; i[[3456789]]86-*-solaris2*) noconfigdirs="$noconfigdirs target-libgloss" ;; i[[3456789]]86-*-sysv4*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; i[[3456789]]86-*-beos*) noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}" ;; i[[3456789]]86-*-rdos*) noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" ;; m32r-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*) noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" ;; m68k-*-elf*) noconfigdirs="$noconfigdirs ${libgcj}" ;; m68k-*-coff*) noconfigdirs="$noconfigdirs ${libgcj}" ;; mcore-*-pe*) # The EPOC C++ environment does not support exceptions or rtti, # and so building libstdc++-v3 tends not to always work. noconfigdirs="$noconfigdirs target-libstdc++-v3" ;; mmix-*-*) noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss" unsupported_languages="$unsupported_languages fortran java" ;; mn10200-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; mn10300-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; mt-*-*) noconfigdirs="$noconfigdirs sim" ;; powerpc-*-aix*) # copied from rs6000-*-* entry noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}" ;; powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe) target_configdirs="$target_configdirs target-winsup" noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}" # always build newlib. skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;; # This is temporary until we can link against shared libraries powerpcle-*-solaris*) noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}" ;; powerpc-*-beos*) noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}" ;; powerpc-*-eabi) noconfigdirs="$noconfigdirs ${libgcj}" ;; powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* ) ;; rs6000-*-lynxos*) noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}" ;; rs6000-*-aix*) noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}" ;; rs6000-*-*) noconfigdirs="$noconfigdirs gprof ${libgcj}" ;; m68k-apollo-*) noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}" ;; mips*-*-irix5*) noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; mips*-*-irix6*) # Linking libjava exceeds command-line length limits on at least # IRIX 6.2, but not on IRIX 6.5. # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham # noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; mips*-*-bsd*) noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; mips64*-*-linux*) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; mips*-*-linux*) noconfigdirs="$noconfigdirs target-newlib target-libgloss" ;; mips*-*-*) noconfigdirs="$noconfigdirs gprof ${libgcj}" ;; romp-*-*) noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" ;; sh-*-* | sh64-*-*) case "${host}" in i[[3456789]]86-*-vsta) ;; # don't add gprof back in i[[3456789]]86-*-go32*) ;; # don't add gprof back in i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;; esac noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; sparc-*-elf*) noconfigdirs="$noconfigdirs ${libgcj}" ;; sparc64-*-elf*) noconfigdirs="$noconfigdirs ${libgcj}" ;; sparclite-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; sparc-*-sunos4*) noconfigdirs="$noconfigdirs ${libgcj}" if test x${is_cross_compiler} != xno ; then noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" else use_gnu_ld=no fi ;; sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*) noconfigdirs="$noconfigdirs ${libgcj}" ;; sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*) ;; spu-*-*) skipdirs="target-libiberty target-libssp" ;; # LLVM LOCAL begin - TCE target tce-*-*) skipdirs="target-libssp target-libstdc++-v3" ;; # LLVM LOCAL end - TCE target v810-*-*) noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}" ;; v850-*-*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; v850e-*-*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; v850ea-*-*) noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;; vax-*-vms) noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}" ;; vax-*-*) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; xtensa-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; ip2k-*-*) noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" ;; *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu) noconfigdirs="$noconfigdirs target-newlib target-libgloss" ;; *-*-lynxos*) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; *-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; esac # If we aren't building newlib, then don't build libgloss, since libgloss # depends upon some newlib header files. case "${noconfigdirs}" in *target-libgloss*) ;; *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;; esac # Work in distributions that contain no compiler tools, like Autoconf. tentative_cc="" host_makefile_frag=/dev/null if test -d ${srcdir}/config ; then case "${host}" in m68k-hp-hpux*) # Avoid "too much defining" errors from HPUX compiler. tentative_cc="cc -Wp,-H256000" # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding. # If it's HP/UX ar, this should be harmless. RANLIB="ar ts" ;; m68k-apollo-sysv*) tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG" ;; m68k-apollo-bsd*) #None of the Apollo compilers can compile gas or binutils. The preprocessor # chokes on bfd, the compiler won't let you assign integers to enums, and # other problems. Defining CC to gcc is a questionable way to say "don't use # the apollo compiler" (the preferred version of GCC could be called cc, # or whatever), but I'm not sure leaving CC as cc is any better... #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG # Used to have BISON=yacc. tentative_cc=gcc ;; m88k-dg-dgux*) tentative_cc="gcc -Wall -ansi -D__using_DGUX" ;; m88k-harris-cxux*) # Under CX/UX, we want to tell the compiler to use ANSI mode. tentative_cc="cc -Xa" host_makefile_frag="config/mh-cxux" ;; m88k-motorola-sysv*) ;; mips*-dec-ultrix*) tentative_cc="cc -Wf,-XNg1000" host_makefile_frag="config/mh-decstation" ;; mips*-nec-sysv4*) # The C compiler on NEC MIPS SVR4 needs bigger tables. tentative_cc="cc -ZXNd=5000 -ZXNg=1000" host_makefile_frag="config/mh-necv4" ;; mips*-sgi-irix4*) # Tell compiler to use K&R C. We can't compile under the SGI Ansi # environment. Also bump switch table size so that cp-parse will # compile. Bump string length limit so linker builds. tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192" ;; mips*-*-sysv4*) host_makefile_frag="config/mh-sysv4" ;; mips*-*-sysv*) # This is for a MIPS running RISC/os 4.52C. # This is needed for GDB, but needs to be in the top-level make because # if a library is compiled with the bsd headers and gets linked with the # sysv system libraries all hell can break loose (e.g. a jmp_buf might be # a different size). # ptrace(2) apparently has problems in the BSD environment. No workaround is # known except to select the sysv environment. Could we use /proc instead? # These "sysv environments" and "bsd environments" often end up being a pain. # # This is not part of CFLAGS because perhaps not all C compilers have this # option. tentative_cc="cc -systype sysv" ;; i370-ibm-opened*) tentative_cc="c89" ;; i[[3456789]]86-*-sysv5*) host_makefile_frag="config/mh-sysv5" ;; i[[3456789]]86-*-dgux*) tentative_cc="gcc -Wall -ansi -D__using_DGUX" host_makefile_frag="config/mh-dgux386" ;; i[[3456789]]86-ncr-sysv4.3*) # The MetaWare compiler will generate a copyright message unless you # turn it off by adding the -Hnocopyr flag. tentative_cc="cc -Hnocopyr" ;; i[[3456789]]86-ncr-sysv4*) # for an NCR 3000 (i486/SVR4) system. # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc. # This compiler not only emits obnoxious copyright messages every time # you run it, but it chokes and dies on a whole bunch of GNU source # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc. tentative_cc="/usr/ccs/ATT/cc" host_makefile_frag="config/mh-ncr3000" ;; i[[3456789]]86-*-sco3.2v5*) ;; i[[3456789]]86-*-sco*) # The native C compiler botches some simple uses of const. Unfortunately, # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h. tentative_cc="cc -Dconst=" host_makefile_frag="config/mh-sco" ;; i[[3456789]]86-*-udk*) host_makefile_frag="config/mh-sysv5" ;; i[[3456789]]86-*-solaris2*) host_makefile_frag="config/mh-sysv4" ;; i[[3456789]]86-*-msdosdjgpp*) host_makefile_frag="config/mh-djgpp" ;; *-cygwin*) host_makefile_frag="config/mh-cygwin" ;; *-mingw32*) ;; *-interix*) host_makefile_frag="config/mh-interix" ;; vax-*-ultrix2*) # The old BSD pcc isn't up to compiling parts of gdb so use gcc tentative_cc=gcc ;; *-*-solaris2*) host_makefile_frag="config/mh-solaris" ;; m68k-sun-sunos*) # Sun's C compiler needs the -J flag to be able to compile cp-parse.c # without overflowing the jump tables (-J says to use a 32 bit table) tentative_cc="cc -J" ;; *-hp-hpux*) tentative_cc="cc -Wp,-H256000" ;; *-*-hiux*) tentative_cc="cc -Wp,-H256000" ;; rs6000-*-lynxos*) # /bin/cc is less than useful for our purposes. Always use GCC tentative_cc="/usr/cygnus/progressive/bin/gcc" host_makefile_frag="config/mh-lynxrs6k" ;; powerpc-*-darwin*) host_makefile_frag="config/mh-ppc-darwin" ;; # APPLE LOCAL begin dynamic-no-pic i[[3456789]]86-*-darwin*) host_makefile_frag="config/mh-x86-darwin" # gcc can default to x86_64 code generation, avoid that if test "${build}" = "${host}"; then CC="${CC-gcc} -m32" CXX="${CXX-g++} -m32" fi ;; # APPLE LOCAL end dynamic-no-pic powerpc-*-aix*) host_makefile_frag="config/mh-ppc-aix" ;; rs6000-*-aix*) host_makefile_frag="config/mh-ppc-aix" ;; *-*-lynxos*) # /bin/cc is less than useful for our purposes. Always use GCC tentative_cc="/bin/gcc" ;; *-*-sysv4*) host_makefile_frag="config/mh-sysv4" ;; # LLVM LOCAL begin x86_64-*-darwin*) host_makefile_frag="config/mh-x86-darwin" ;; # LLVM LOCAL end # This is placed last to prevent interfering with the cases above. i[[3456789]]86-*-*) # Build the stage2 and stage3 compilers with -fomit-frame-pointer. host_makefile_frag="config/mh-x86omitfp" ;; esac fi # If we aren't going to be using gcc, see if we can extract a definition # of CC from the fragment. # Actually, use the 'pre-extracted' version above. if test -z "${CC}" && test "${build}" = "${host}" ; then IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" found= for dir in $PATH; do test -z "$dir" && dir=. if test -f $dir/gcc; then found=yes break fi done IFS="$save_ifs" if test -z "${found}" && test -n "${tentative_cc}" ; then CC=$tentative_cc fi fi if test "${build}" != "${host}" ; then # If we are doing a Canadian Cross, in which the host and build systems # are not the same, we set reasonable default values for the tools. CC=${CC-${host_alias}-gcc} CFLAGS=${CFLAGS-"-g -O2"} CXX=${CXX-${host_alias}-c++} CXXFLAGS=${CXXFLAGS-"-g -O2"} CC_FOR_BUILD=${CC_FOR_BUILD-gcc} else # Set reasonable default values for some tools even if not Canadian. # Of course, these are different reasonable default values, originally # specified directly in the Makefile. # We don't export, so that autoconf can do its job. # Note that all these settings are above the fragment inclusion point # in Makefile.in, so can still be overridden by fragments. # This is all going to change when we autoconfiscate... CC_FOR_BUILD="\$(CC)" AC_PROG_CC # We must set the default linker to the linker used by gcc for the correct # operation of libtool. If LD is not defined and we are using gcc, try to # set the LD default to the ld used by gcc. if test -z "$LD"; then if test "$GCC" = yes; then case $build in *-*-mingw*) gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; *) gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; esac case $gcc_prog_ld in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] LD="$gcc_prog_ld" ;; esac fi fi CXX=${CXX-"c++"} CFLAGS=${CFLAGS-"-g"} CXXFLAGS=${CXXFLAGS-"-g -O2"} fi ACX_PROG_GNAT ACX_PROG_CMP_IGNORE_INITIAL # Check for GMP and MPFR gmplibs="-lmpfr" gmpinc= have_gmp=yes # Specify a location for mpfr # check for this first so it ends up on the link line before gmp. AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH This option has been REMOVED], AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed. Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])) AC_ARG_WITH(mpfr, [ --with-mpfr=PATH Specify prefix directory for installed MPFR package Equivalent to --with-mpfr-include=PATH/include plus --with-mpfr-lib=PATH/lib]) AC_ARG_WITH(mpfr_include, [ --with-mpfr-include=PATH Specify directory for installed MPFR include files]) AC_ARG_WITH(mpfr_lib, [ --with-mpfr-lib=PATH Specify the directory for the installed MPFR library]) if test "x$with_mpfr" != x; then gmplibs="-L$with_mpfr/lib $gmplibs" gmpinc="-I$with_mpfr/include" fi if test "x$with_mpfr_include" != x; then gmpinc="-I$with_mpfr_include" fi if test "x$with_mpfr_lib" != x; then gmplibs="-L$with_mpfr_lib $gmplibs" fi # Specify a location for gmp AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH This option has been REMOVED], AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed. Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])) gmplibs="$gmplibs -lgmp" AC_ARG_WITH(gmp, [ --with-gmp=PATH Specify prefix directory for the installed GMP package Equivalent to --with-gmp-include=PATH/include plus --with-gmp-lib=PATH/lib]) AC_ARG_WITH(gmp_include, [ --with-gmp-include=PATH Specify directory for installed GMP include files]) AC_ARG_WITH(gmp_lib, [ --with-gmp-lib=PATH Specify the directory for the installed GMP library]) if test "x$with_gmp" != x; then gmplibs="-L$with_gmp/lib $gmplibs" gmpinc="-I$with_gmp/include $gmpinc" fi if test "x$with_gmp_include" != x; then gmpinc="-I$with_gmp_include $gmpinc" fi if test "x$with_gmp_lib" != x; then gmplibs="-L$with_gmp_lib $gmplibs" fi saved_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $gmpinc" # Check GMP actually works AC_MSG_CHECKING([for correct version of gmp.h]) AC_TRY_COMPILE([#include "gmp.h"],[ #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1) choke me #endif ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no]) if test x"$have_gmp" = xyes; then AC_MSG_CHECKING([for correct version of mpfr.h]) AC_TRY_COMPILE([#include "gmp.h" #include ],[ #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1) choke me #endif ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy version of MPFR detected])]) saved_LIBS="$LIBS" LIBS="$LIBS $gmplibs" AC_MSG_CHECKING([for any version of mpfr.h]) AC_TRY_LINK([#include #include ], [mpfr_t n; mpfr_init(n);], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no]) LIBS="$saved_LIBS" fi CFLAGS="$saved_CFLAGS" # Flags needed for both GMP and/or MPFR AC_SUBST(gmplibs) AC_SUBST(gmpinc) # By default, C is the only stage 1 language. stage1_languages=c AC_SUBST(stage1_languages) # Figure out what language subdirectories are present. # Look if the user specified --enable-languages="..."; if not, use # the environment variable $LANGUAGES if defined. $LANGUAGES might # go away some day. # NB: embedded tabs in this IF block -- do not untabify if test -d ${srcdir}/gcc; then if test x"${enable_languages+set}" != xset; then if test x"${LANGUAGES+set}" = xset; then enable_languages="${LANGUAGES}" echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2 else enable_languages=all fi else if test x"${enable_languages}" = x || test x"${enable_languages}" = xyes; then echo configure.in: --enable-languages needs at least one language argument 1>&2 exit 1 fi fi enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'` # 'f95' is the old name for the 'fortran' language. We issue a warning # and make the substitution. case ,${enable_languages}, in *,f95,*) echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2 enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'` ;; esac # First scan to see if an enabled language requires some other language. # We assume that a given config-lang.in will list all the language # front ends it requires, even if some are required indirectly. for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do case ${lang_frag} in ..) ;; # The odd quoting in the next line works around # an apparent bug in bash 1.12 on linux. ${srcdir}/gcc/[[*]]/config-lang.in) ;; *) # From the config-lang.in, get $language, $lang_requires language= lang_requires= . ${lang_frag} for other in ${lang_requires} ; do case ,${enable_languages}, in *,$other,*) ;; *,all,*) ;; *,$language,*) echo " \`$other' language required by \`$language'; enabling" 1>&2 enable_languages="${enable_languages},${other}" ;; esac done ;; esac done new_enable_languages=c missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ ` potential_languages=c for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do case ${lang_frag} in ..) ;; # The odd quoting in the next line works around # an apparent bug in bash 1.12 on linux. ${srcdir}/gcc/[[*]]/config-lang.in) ;; *) # From the config-lang.in, get $language, $target_libs, # $lang_dirs, $boot_language, and $build_by_default language= target_libs= lang_dirs= subdir_requires= boot_language= build_by_default= need_gmp= . ${lang_frag} potential_languages="${potential_languages},${language}" # This is quite sensitive to the ordering of the case statement arms. case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in *::*:*) echo "${lang_frag} doesn't set \$language." 1>&2 exit 1 ;; *:ada:no:*) # Ada was requested with no preexisting GNAT. Disable unconditionally. add_this_lang=no ;; *,${language},*:*:*:*) # Language was explicitly selected; include it. add_this_lang=yes ;; *,all,*:*:*:no) # 'all' was selected, but this is not a default language # so do not include it. add_this_lang=no ;; *,all,*:*:*:*) # 'all' was selected and this is a default language; include it. add_this_lang=yes ;; *) add_this_lang=no ;; esac # Disable languages that need other directories if these aren't available. for i in $subdir_requires; do test -f "$srcdir/gcc/$i/config-lang.in" && continue case ,${enable_languages}, in *,${language},*) # Specifically requested language; tell them. AC_MSG_ERROR([The gcc/$i directory contains parts of $language but is missing]) ;; *) # Silently disable. add_this_lang=no ;; esac done # Disable languages that need GMP if it isn't available. case ,${enable_languages},:${have_gmp}:${need_gmp} in *,${language},*:no:yes) # Specifically requested language; tell them. AC_MSG_ERROR([GMP 4.1 and MPFR 2.2.1 or newer versions required by $language]) ;; *:no:yes) # Silently disable. add_this_lang=no ;; esac # Disable a language that is unsupported by the target. case " $unsupported_languages " in *" $language "*) add_this_lang=no ;; esac case $add_this_lang in no) # Remove language-dependent dirs. eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" ;; *) new_enable_languages="$new_enable_languages,$language" missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"` case ${boot_language} in yes) # Add to (comma-separated) list of stage 1 languages. stage1_languages="${stage1_languages},${language}" ;; esac ;; esac ;; esac done missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"` if test "x$missing_languages" != x; then AC_MSG_ERROR([ The following requested languages could not be built: ${missing_languages} Recognised languages are: ${potential_languages}]) fi if test "x$new_enable_languages" != "x$enable_languages"; then echo The following languages will be built: ${new_enable_languages} fi enable_languages="$new_enable_languages" ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ ` fi # Handle --disable- generically. for dir in $configdirs $build_configdirs $target_configdirs ; do dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g` if eval test x\${enable_${dirname}} "=" xno ; then noconfigdirs="$noconfigdirs $dir" fi done # Check for Boehm's garbage collector AC_ARG_ENABLE(objc-gc, [ --enable-objc-gc enable the use of Boehm's garbage collector with the GNU Objective-C runtime.], [case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in *,objc,*:*:yes:*target-boehm-gc*) AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration]) ;; esac]) # Make sure we only build Boehm's garbage collector if required. case ,${enable_languages},:${enable_objc_gc} in *,objc,*:yes) # Keep target-boehm-gc if requested for Objective-C. ;; *) # Otherwise remove target-boehm-gc depending on target-libjava. if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then noconfigdirs="$noconfigdirs target-boehm-gc" fi ;; esac # Remove the entries in $skipdirs and $noconfigdirs from $configdirs, # $build_configdirs and $target_configdirs. # If we have the source for $noconfigdirs entries, add them to $notsupp. notsupp="" for dir in . $skipdirs $noconfigdirs ; do dirname=`echo $dir | sed -e s/target-//g -e s/build-//g` if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"` if test -r $srcdir/$dirname/configure ; then if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then true else notsupp="$notsupp $dir" fi fi fi if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"` if test -r $srcdir/$dirname/configure ; then if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then true else notsupp="$notsupp $dir" fi fi fi if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"` if test -r $srcdir/$dirname/configure ; then if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then true else notsupp="$notsupp $dir" fi fi fi done # Sometimes the tools are distributed with libiberty but with no other # libraries. In that case, we don't want to build target-libiberty. if test -n "${target_configdirs}" ; then others= for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do if test "$i" != "libiberty" ; then if test -r $srcdir/$i/configure ; then others=yes; break; fi fi done if test -z "${others}" ; then target_configdirs= fi fi # Quietly strip out all directories which aren't configurable in this tree. # This relies on all configurable subdirectories being autoconfiscated, which # is now the case. build_configdirs_all="$build_configdirs" build_configdirs= for i in ${build_configdirs_all} ; do j=`echo $i | sed -e s/build-//g` if test -f ${srcdir}/$j/configure ; then build_configdirs="${build_configdirs} $i" fi done configdirs_all="$configdirs" configdirs= for i in ${configdirs_all} ; do if test -f ${srcdir}/$i/configure ; then configdirs="${configdirs} $i" fi done target_configdirs_all="$target_configdirs" target_configdirs= for i in ${target_configdirs_all} ; do j=`echo $i | sed -e s/target-//g` if test -f ${srcdir}/$j/configure ; then target_configdirs="${target_configdirs} $i" fi done # Produce a warning message for the subdirs we can't configure. # This isn't especially interesting in the Cygnus tree, but in the individual # FSF releases, it's important to let people know when their machine isn't # supported by the one or two programs in a package. if test -n "${notsupp}" && test -z "${norecursion}" ; then # If $appdirs is non-empty, at least one of those directories must still # be configured, or we error out. (E.g., if the gas release supports a # specified target in some subdirs but not the gas subdir, we shouldn't # pretend that all is well.) if test -n "$appdirs" ; then for dir in $appdirs ; do if test -r $dir/Makefile.in ; then if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then appdirs="" break fi if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then appdirs="" break fi fi done if test -n "$appdirs" ; then echo "*** This configuration is not supported by this package." 1>&2 exit 1 fi fi # Okay, some application will build, or we don't care to check. Still # notify of subdirs not getting built. echo "*** This configuration is not supported in the following subdirectories:" 1>&2 echo " ${notsupp}" 1>&2 echo " (Any other directories should still work fine.)" 1>&2 fi case "$host" in *msdosdjgpp*) enable_gdbtk=no ;; esac copy_dirs= AC_ARG_WITH([build-sysroot], [ --with-build-sysroot=sysroot use sysroot as the system root during the build], [if test x"$withval" != x ; then # APPLE LOCAL 7852964 Use -isysroot instead of --sysroot. SYSROOT_CFLAGS_FOR_TARGET="-isysroot $withval" fi], [SYSROOT_CFLAGS_FOR_TARGET=]) AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET) # Handle --with-headers=XXX. If the value is not "yes", the contents of # the named directory are copied to $(tooldir)/sys-include. if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then if test x${is_cross_compiler} = xno ; then echo 1>&2 '***' --with-headers is only supported when cross compiling exit 1 fi if test x"${with_headers}" != xyes ; then case "${exec_prefixoption}" in "") x=${prefix} ;; *) x=${exec_prefix} ;; esac copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include" fi fi # Handle --with-libs=XXX. If the value is not "yes", the contents of # the name directories are copied to $(tooldir)/lib. Multiple directories # are permitted. if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then if test x${is_cross_compiler} = xno ; then echo 1>&2 '***' --with-libs is only supported when cross compiling exit 1 fi if test x"${with_libs}" != xyes ; then # Copy the libraries in reverse order, so that files in the first named # library override files in subsequent libraries. case "${exec_prefixoption}" in "") x=${prefix} ;; *) x=${exec_prefix} ;; esac for l in ${with_libs}; do copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}" done fi fi # Set with_gnu_as and with_gnu_ld as appropriate. # # This is done by determining whether or not the appropriate directory # is available, and by checking whether or not specific configurations # have requested that this magic not happen. # # The command line options always override the explicit settings in # configure.in, and the settings in configure.in override this magic. # # If the default for a toolchain is to use GNU as and ld, and you don't # want to do that, then you should use the --without-gnu-as and # --without-gnu-ld options for the configure script. if test x${use_gnu_as} = x && echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then with_gnu_as=yes extra_host_args="$extra_host_args --with-gnu-as" fi if test x${use_gnu_ld} = x && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then with_gnu_ld=yes extra_host_args="$extra_host_args --with-gnu-ld" fi # If using newlib, add --with-newlib to the extra_host_args so that gcc/configure # can detect this case. if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then with_newlib=yes extra_host_args="$extra_host_args --with-newlib" fi # Handle ${copy_dirs} set fnord ${copy_dirs} shift while test $# != 0 ; do if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then : else echo Copying $1 to $2 # Use the install script to create the directory and all required # parent directories. if test -d $2 ; then : else echo >config.temp ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED fi # Copy the directory, assuming we have tar. # FIXME: Should we use B in the second tar? Not all systems support it. (cd $1; tar -cf - .) | (cd $2; tar -xpf -) # It is the responsibility of the user to correctly adjust all # symlinks. If somebody can figure out how to handle them correctly # here, feel free to add the code. echo $1 > $2/COPIED fi shift; shift done # Determine a target-dependent exec_prefix that the installed # gcc will search in. Keep this list sorted by triplet, with # the *-*-osname triplets last. md_exec_prefix= case "${target}" in alpha*-*-*vms*) md_exec_prefix=/gnu/lib/gcc-lib ;; i[34567]86-pc-msdosdjgpp*) md_exec_prefix=/dev/env/DJDIR/bin ;; i[34567]86-*-sco3.2v5*) if test $with_gnu_as = yes; then md_exec_prefix=/usr/gnu/bin else md_exec_prefix=/usr/ccs/bin/elf fi ;; mn10300-*-* | \ powerpc-*-chorusos* | \ powerpc*-*-eabi* | \ powerpc*-*-sysv* | \ powerpc*-*-kaos* | \ s390x-ibm-tpf*) md_exec_prefix=/usr/ccs/bin ;; sparc64-*-elf*) ;; v850*-*-*) md_exec_prefix=/usr/ccs/bin ;; xtensa-*-elf*) ;; *-*-beos* | \ *-*-elf* | \ *-*-hpux* | \ *-*-netware* | \ *-*-nto-qnx* | \ *-*-rtems* | \ *-*-solaris2* | \ *-*-sysv[45]* | \ *-*-vxworks* | \ *-wrs-windiss) md_exec_prefix=/usr/ccs/bin ;; esac extra_arflags_for_target= extra_nmflags_for_target= extra_ranlibflags_for_target= target_makefile_frag=/dev/null case "${target}" in *-*-netware*) target_makefile_frag="config/mt-netware" ;; *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu) target_makefile_frag="config/mt-gnu" ;; *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*) # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm # commands to handle both 32-bit and 64-bit objects. These flags are # harmless if we're using GNU nm or ar. extra_arflags_for_target=" -X32_64" extra_nmflags_for_target=" -B -X32_64" ;; *-*-darwin*) # ranlib from Darwin requires the -c flag to look at common symbols. extra_ranlibflags_for_target=" -c" ;; mips*-*-pe | sh*-*-pe | *arm-wince-pe) target_makefile_frag="config/mt-wince" ;; esac alphaieee_frag=/dev/null case $target in alpha*-*-*) # This just makes sure to use the -mieee option to build target libs. # This should probably be set individually by each library. alphaieee_frag="config/mt-alphaieee" ;; esac # If --enable-target-optspace always use -Os instead of -O2 to build # the target libraries, similarly if it is not specified, use -Os # on selected platforms. ospace_frag=/dev/null case "${enable_target_optspace}:${target}" in yes:*) ospace_frag="config/mt-ospace" ;; :d30v-*) ospace_frag="config/mt-d30v" ;; :m32r-* | :d10v-* | :fr30-*) ospace_frag="config/mt-ospace" ;; no:* | :*) ;; *) echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2 ;; esac # Default to using --with-stabs for certain targets. if test x${with_stabs} = x ; then case "${target}" in mips*-*-irix[[56]]*) ;; mips*-*-* | alpha*-*-osf*) with_stabs=yes; extra_host_args="${extra_host_args} --with-stabs" ;; esac fi # hpux11 in 64bit mode has libraries in a weird place. Arrange to find # them automatically. case "${host}" in hppa*64*-*-hpux11*) extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include" ;; esac # Some systems (e.g., one of the i386-aix systems the gas testers are # using) don't handle "\$" correctly, so don't use it here. tooldir='${exec_prefix}'/${target_alias} build_tooldir=${tooldir} # Create a .gdbinit file which runs the one in srcdir # and tells GDB to look there for source files. if test -r ${srcdir}/.gdbinit ; then case ${srcdir} in .) ;; *) cat > ./.gdbinit < conftest.c ${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c if test $? = 0 ; then if test -s conftest || test -s conftest.exe ; then we_are_ok=yes fi fi case $we_are_ok in no) echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed." echo 1>&2 "*** You must set the environment variable CC to a working compiler." rm -f conftest* exit 1 ;; esac rm -f conftest* # The Solaris /usr/ucb/cc compiler does not appear to work. case "${host}" in sparc-sun-solaris2*) CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`" if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then could_use= test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin" if test -d /opt/cygnus/bin ; then if test "$could_use" = "" ; then could_use="/opt/cygnus/bin" else could_use="$could_use or /opt/cygnus/bin" fi fi if test "$could_use" = "" ; then echo "Warning: compilation may fail because you're using" echo "/usr/ucb/cc. You should change your PATH or CC " echo "variable and rerun configure." else echo "Warning: compilation may fail because you're using" echo "/usr/ucb/cc, when you should use the C compiler from" echo "$could_use. You should change your" echo "PATH or CC variable and rerun configure." fi fi ;; esac case "${host}" in *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;; *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;; *) RPATH_ENVVAR=LD_LIBRARY_PATH ;; esac # Record target_configdirs and the configure arguments for target and # build configuration in Makefile. target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'` build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'` # Determine whether gdb needs tk/tcl or not. # Use 'maybe' since enable_gdbtk might be true even if tk isn't available # and in that case we want gdb to be built without tk. Ugh! # In fact I believe gdb is the *only* package directly dependent on tk, # so we should be able to put the 'maybe's in unconditionally and # leave out the maybe dependencies when enable_gdbtk is false. I'm not # 100% sure that that's safe though. gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui" case "$enable_gdbtk" in no) GDB_TK="" ;; yes) GDB_TK="${gdb_tk}" ;; *) # Only add the dependency on gdbtk when GDBtk is part of the gdb # distro. Eventually someone will fix this and move Insight, nee # gdbtk to a separate directory. if test -d ${srcdir}/gdb/gdbtk ; then GDB_TK="${gdb_tk}" else GDB_TK="" fi ;; esac CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g` INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g` # Strip out unwanted targets. # While at that, we remove Makefiles if we were started for recursive # configuration, so that the top-level Makefile reconfigures them, # like we used to do when configure itself was recursive. # Loop over modules. $extrasub must be used with care, limiting as # much as possible the usage of range addresses. That's because autoconf # splits the sed script to overcome limits in the number of commands, # and relying on carefully-timed sed passes may turn out to be very hard # to maintain later. In this particular case, you just have to be careful # not to nest @if/@endif pairs, because configure will not warn you at all. AC_ARG_ENABLE([bootstrap], [ --enable-bootstrap Enable bootstrapping [yes if native build]],, enable_bootstrap=default) # Issue errors and warnings for invalid/strange bootstrap combinations. case "$configdirs" in *gcc*) have_compiler=yes ;; *) have_compiler=no ;; esac case "$have_compiler:$host:$target:$enable_bootstrap" in *:*:*:no) ;; # Default behavior. Enable bootstrap if we have a compiler # and we are in a native configuration. yes:$build:$build:default) enable_bootstrap=yes ;; *:*:*:default) enable_bootstrap=no ;; # We have a compiler and we are in a native configuration, bootstrap is ok yes:$build:$build:yes) ;; # Other configurations, but we have a compiler. Assume the user knows # what he's doing. yes:*:*:yes) AC_MSG_WARN([trying to bootstrap a cross compiler]) ;; # No compiler: if they passed --enable-bootstrap explicitly, fail no:*:*:yes) AC_MSG_ERROR([cannot bootstrap without a compiler]) ;; # Fail if wrong command line *) AC_MSG_ERROR([invalid option for --enable-bootstrap]) ;; esac # Adjust the toplevel makefile according to whether bootstrap was selected. case "$enable_bootstrap" in yes) bootstrap_suffix=bootstrap ;; no) bootstrap_suffix=no-bootstrap ;; esac for module in ${build_configdirs} ; do if test -z "${no_recursion}" \ && test -f ${build_subdir}/${module}/Makefile; then echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure" rm -f ${build_subdir}/${module}/Makefile fi extrasub="$extrasub /^@if build-$module\$/d /^@endif build-$module\$/d /^@if build-$module-$bootstrap_suffix\$/d /^@endif build-$module-$bootstrap_suffix\$/d" done for module in ${configdirs} ; do if test -z "${no_recursion}"; then for file in stage*-${module}/Makefile ${module}/Makefile; do if test -f ${file}; then echo 1>&2 "*** removing ${file} to force reconfigure" rm -f ${file} fi done fi extrasub="$extrasub /^@if $module\$/d /^@endif $module\$/d /^@if $module-$bootstrap_suffix\$/d /^@endif $module-$bootstrap_suffix\$/d" done for module in ${target_configdirs} ; do if test -z "${no_recursion}" \ && test -f ${target_subdir}/${module}/Makefile; then echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure" rm -f ${target_subdir}/${module}/Makefile fi extrasub="$extrasub /^@if target-$module\$/d /^@endif target-$module\$/d /^@if target-$module-$bootstrap_suffix\$/d /^@endif target-$module-$bootstrap_suffix\$/d" done extrasub="$extrasub /^@if /,/^@endif /d" # Create the serialization dependencies. This uses a temporary file. AC_ARG_ENABLE([serial-configure], [ --enable-serial-[{host,target,build}-]configure Force sequential configuration of sub-packages for the host, target or build machine, or all sub-packages]) case ${enable_serial_configure} in yes) enable_serial_build_configure=yes enable_serial_host_configure=yes enable_serial_target_configure=yes ;; esac # These force 'configure's to be done one at a time, to avoid problems # with contention over a shared config.cache. rm -f serdep.tmp echo '# serdep.tmp' > serdep.tmp olditem= test "x${enable_serial_build_configure}" = xyes && for item in ${build_configdirs} ; do case ${olditem} in "") ;; *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;; esac olditem=${item} done olditem= test "x${enable_serial_host_configure}" = xyes && for item in ${configdirs} ; do case ${olditem} in "") ;; *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;; esac olditem=${item} done olditem= test "x${enable_serial_target_configure}" = xyes && for item in ${target_configdirs} ; do case ${olditem} in "") ;; *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;; esac olditem=${item} done serialization_dependencies=serdep.tmp AC_SUBST_FILE(serialization_dependencies) # Base args. Strip norecursion, cache-file, srcdir, host, build, # target and nonopt. These are the ones we might not want to pass # down to subconfigures. Also strip program-prefix, program-suffix, # and program-transform-name, so that we can pass down a consistent # program-transform-name. If autoconf has put single quotes around # any of these arguments (because they contain shell metacharacters) # then this will fail; in practice this only happens for # --program-transform-name, so be sure to override --program-transform-name # at the end of the argument list. # These will be expanded by make, so quote '$'. cat <<\EOF_SED > conftestsed s/ --no[[^ ]]*/ /g s/ --c[[a-z-]]*[[= ]][[^ ]]*//g s/ --sr[[a-z-]]*[[= ]][[^ ]]*//g s/ --ho[[a-z-]]*[[= ]][[^ ]]*//g s/ --bu[[a-z-]]*[[= ]][[^ ]]*//g s/ --t[[a-z-]]*[[= ]][[^ ]]*//g s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]*//g s/ -cache-file[[= ]][[^ ]]*//g s/ -srcdir[[= ]][[^ ]]*//g s/ -host[[= ]][[^ ]]*//g s/ -build[[= ]][[^ ]]*//g s/ -target[[= ]][[^ ]]*//g s/ -program-prefix[[= ]][[^ ]]*//g s/ -program-suffix[[= ]][[^ ]]*//g s/ -program-transform-name[[= ]][[^ ]]*//g s/ [[^' -][^ ]*] / / s/^ *//;s/ *$// s,\$,$$,g EOF_SED sed -f conftestsed < conftestsed.out ${ac_configure_args} EOF_SED baseargs=`cat conftestsed.out` rm -f conftestsed conftestsed.out # Add in --program-transform-name, after --program-prefix and # --program-suffix have been applied to it. Autoconf has already # doubled dollar signs and backslashes in program_transform_name; we want # the backslashes un-doubled, and then the entire thing wrapped in single # quotes, because this will be expanded first by make and then by the shell. # Also, because we want to override the logic in subdir configure scripts to # choose program_transform_name, replace any s,x,x, with s,y,y,. sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" < conftestsed.out ${program_transform_name} EOF_SED gcc_transform_name=`cat conftestsed.out` rm -f conftestsed.out baseargs="$baseargs --program-transform-name='${gcc_transform_name}'" # For the build-side libraries, we just need to pretend we're native, # and not use the same cache file. Multilibs are neither needed nor # desired. build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} --target=${target_alias} ${baseargs}" # For host modules, accept cache file option, or specification as blank. case "${cache_file}" in "") # empty cache_file_option="" ;; /* | [[A-Za-z]]:[[\\/]]* ) # absolute path cache_file_option="--cache-file=${cache_file}" ;; *) # relative path cache_file_option="--cache-file=../${cache_file}" ;; esac # Host dirs don't like to share a cache file either, horribly enough. # This seems to be due to autoconf 2.5x stupidity. host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}" target_configargs=${baseargs} # Passing a --with-cross-host argument lets the target libraries know # whether they are being built with a cross-compiler or being built # native. However, it would be better to use other mechanisms to make the # sorts of decisions they want to make on this basis. Please consider # this option to be deprecated. FIXME. if test x${is_cross_compiler} = xyes ; then target_configargs="--with-cross-host=${host_alias} ${target_configargs}" fi # Default to --enable-multilib. if test x${enable_multilib} = x ; then target_configargs="--enable-multilib ${target_configargs}" fi # Pass --with-newlib if appropriate. Note that target_configdirs has # changed from the earlier setting of with_newlib. if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then target_configargs="--with-newlib ${target_configargs}" fi # Different target subdirs use different values of certain variables # (notably CXX). Worse, multilibs use *lots* of different values. # Worse yet, autoconf 2.5x makes some of these 'precious', meaning that # it doesn't automatically accept command-line overrides of them. # This means it's not safe for target subdirs to share a cache file, # which is disgusting, but there you have it. Hopefully this can be # fixed in future. It's still worthwhile to use a cache file for each # directory. I think. # Pass the appropriate --build, --host, --target and --cache-file arguments. # We need to pass --target, as newer autoconf's requires consistency # for target_alias and gcc doesn't manage it consistently. target_configargs="--cache-file=./config.cache --build=${build_alias} --host=${target_alias} --target=${target_alias} ${target_configargs}" FLAGS_FOR_TARGET= case " $target_configdirs " in *" newlib "*) case " $target_configargs " in *" --with-newlib "*) case "$target" in *-cygwin*) FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;; esac # If we're not building GCC, don't discard standard headers. if test -d ${srcdir}/gcc; then FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc' if test "${build}" != "${host}"; then # On Canadian crosses, CC_FOR_TARGET will have already been set # by `configure', so we won't have an opportunity to add -Bgcc/ # to it. This is right: we don't want to search that directory # for binaries, but we want the header files in there, so add # them explicitly. FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include' # Someone might think of using the pre-installed headers on # Canadian crosses, in case the installed compiler is not fully # compatible with the compiler being built. In this case, it # would be better to flag an error than risking having # incompatible object files being constructed. We can't # guarantee that an error will be flagged, but let's hope the # compiler will do it, when presented with incompatible header # files. fi fi case "${target}-${is_cross_compiler}" in i[[3456789]]86-*-linux*-no) # Here host == target, so we don't need to build gcc, # so we don't want to discard standard headers. FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'` ;; *) # If we're building newlib, use its generic headers last, but search # for any libc-related directories first (so make it the last -B # switch). FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include' ;; esac ;; esac ;; esac case "$target" in *-mingw*) # Can't be handled as Cygwin above since Mingw does not use newlib. FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;; esac # Allow the user to override the flags for # our build compiler if desired. CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}} # On Canadian crosses, we'll be searching the right directories for # the previously-installed cross compiler, so don't bother to add # flags for directories within the install tree of the compiler # being built; programs in there won't even run. if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then # Search for pre-installed headers if nothing else fits. FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' fi if test "x${use_gnu_ld}" = x && echo " ${configdirs} " | grep " ld " > /dev/null ; then # Arrange for us to find uninstalled linker scripts. FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld' fi # Search for other target-specific linker scripts and such. case "${target}" in m32c-*-* ) if test -d ${srcdir}/libgloss/m32c; then # This is for crt0.o FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c' # This is for r8c.ld FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c' # This is for libnosys.a FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys' fi ;; esac # Makefile fragments. for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag; do eval fragval=\$$frag if test $fragval != /dev/null; then eval $frag=${srcdir}/$fragval fi done AC_SUBST_FILE(host_makefile_frag) AC_SUBST_FILE(target_makefile_frag) AC_SUBST_FILE(alphaieee_frag) AC_SUBST_FILE(ospace_frag) # Miscellanea: directories, flags, etc. AC_SUBST(RPATH_ENVVAR) AC_SUBST(tooldir) AC_SUBST(build_tooldir) AC_SUBST(CONFIGURE_GDB_TK) AC_SUBST(GDB_TK) AC_SUBST(INSTALL_GDB_TK) # Build module lists & subconfigure args. AC_SUBST(build_configargs) AC_SUBST(build_configdirs) # Host module lists & subconfigure args. AC_SUBST(host_configargs) AC_SUBST(configdirs) # Target module lists & subconfigure args. AC_SUBST(target_configargs) # Build tools. AC_SUBST(CC_FOR_BUILD) AC_SUBST(config_shell) # Generate default definitions for YACC, M4, LEX and other programs that run # on the build machine. These are used if the Makefile can't locate these # programs in objdir. MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y]) case " $build_configdirs " in *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;; *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;; esac AC_CHECK_PROGS([BISON], [bison], [$MISSING bison]) case " $build_configdirs " in *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;; esac AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4]) case " $build_configdirs " in *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;; esac AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex]) case " $build_configdirs " in *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;; esac AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex]) case " $build_configdirs " in *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; esac AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo]) case " $build_configdirs " in *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;; *) changequote(,) # For an installed makeinfo, we require it to be from texinfo 4.4 or # higher, else we use the "missing" dummy. if ${MAKEINFO} --version \ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.([4-9]|[1-9][0-9])|[5-9])' >/dev/null 2>&1; then : else MAKEINFO="$MISSING makeinfo" fi ;; changequote([,]) esac # FIXME: expect and dejagnu may become build tools? AC_CHECK_PROGS(EXPECT, expect, expect) case " $configdirs " in *" expect "*) test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect' ;; esac AC_CHECK_PROGS(RUNTEST, runtest, runtest) case " $configdirs " in *" dejagnu "*) test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest' ;; esac # Host tools. NCN_STRICT_CHECK_TOOLS(AR, ar) NCN_STRICT_CHECK_TOOLS(AS, as) NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool) NCN_STRICT_CHECK_TOOLS(LD, ld) NCN_STRICT_CHECK_TOOLS(LIPO, lipo) NCN_STRICT_CHECK_TOOLS(NM, nm) NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, :) NCN_STRICT_CHECK_TOOLS(STRIP, strip, :) NCN_STRICT_CHECK_TOOLS(WINDRES, windres) NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy) NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump) AC_SUBST(CC) AC_SUBST(CXX) AC_SUBST(CFLAGS) AC_SUBST(CFLAGS_FOR_BUILD) AC_SUBST(CXXFLAGS) # Target tools. AC_ARG_WITH([build-time-tools], [ --with-build-time-tools=path use given path to find target tools during the build], [case x"$withval" in x/*) ;; *) with_build_time_tools= AC_MSG_WARN([argument to --with-build-time-tools must be an absolute path]) ;; esac], [with_build_time_tools=]) NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc) NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx) NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET}) NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj) NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran) ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar) ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as) ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool) ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld) ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo) ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm) ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump) ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :) ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip) ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres) RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET" GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar]) GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new]) GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX, [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], c++) GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX, [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], c++) GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool]) GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) GCC_TARGET_TOOL(gcj, GCJ_FOR_TARGET, GCJ, [gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java) GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN, [gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran) GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new]) GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO) GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new]) GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump]) GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib]) GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip]) GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres]) AC_SUBST(FLAGS_FOR_TARGET) AC_SUBST(RAW_CXX_FOR_TARGET) # Certain tools may need extra flags. AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target} RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} # When building target libraries, except in a Canadian cross, we use # the same toolchain as the compiler we just built. COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)' COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)' COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)' if test $host = $build; then case " $configdirs " in *" gcc "*) COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target} ;; esac fi AC_SUBST(COMPILER_AS_FOR_TARGET) AC_SUBST(COMPILER_LD_FOR_TARGET) AC_SUBST(COMPILER_NM_FOR_TARGET) AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) AC_MSG_RESULT($USE_MAINTAINER_MODE) AC_SUBST(MAINTAINER_MODE_TRUE) AC_SUBST(MAINTAINER_MODE_FALSE) if test "$USE_MAINTAINER_MODE" = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl # --------------------- # GCC bootstrap support # --------------------- # Stage specific cflags for build. stage1_cflags="-g" case $build in vax-*-*) case ${GCC} in yes) stage1_cflags="-g -Wa,-J" ;; *) stage1_cflags="-g -J" ;; esac ;; powerpc-*-darwin*) # The spiffy cpp-precomp chokes on some legitimate constructs in GCC # sources; use -no-cpp-precomp to get to GNU cpp. # Apple's GCC has bugs in designated initializer handling, so disable # that too. stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0" ;; esac # LLVM LOCAL begin - LLVM uses inlined functions if false ; then # This is aimed to mimic bootstrap with a non-GCC compiler to catch problems. if test "$GCC" = yes; then saved_CFLAGS="$CFLAGS" # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it. CFLAGS="$CFLAGS -fkeep-inline-functions" AC_MSG_CHECKING([whether -fkeep-inline-functions is supported]) AC_TRY_COMPILE([ #if (__GNUC__ < 3) \ || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \ || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1))) #error http://gcc.gnu.org/PR29382 #endif ],, [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"], [AC_MSG_RESULT([no])]) CFLAGS="$saved_CFLAGS" fi fi # LLVM LOCAL end - LLVM uses inlined functions. AC_SUBST(stage1_cflags) # Enable --enable-checking in stage1 of the compiler. AC_ARG_ENABLE(stage1-checking, [ --enable-stage1-checking[=all] choose additional checking for stage1 of the compiler.], [stage1_checking=--enable-checking=${enable_stage1_checking}], [if test "x$enable_checking" = xno; then # LLVM LOCAL begin - don't enable checking when we meant to disable it stage1_checking=--disable-checking # LLVM LOCAL end - don't enable checking when we meant to disable it else stage1_checking=--enable-checking${enable_checking+=}$enable_checking fi]) AC_SUBST(stage1_checking) # Enable -Werror in bootstrap stage2 and later. AC_ARG_ENABLE(werror, [ --enable-werror enable -Werror in bootstrap stage2 and later], [], [if test -d gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then enable_werror=yes else enable_werror=no fi]) case ${enable_werror} in yes) stage2_werror_flag="--enable-werror-always" ;; *) stage2_werror_flag="" ;; esac AC_SUBST(stage2_werror_flag) # Flags needed to enable html installing and building AC_ARG_WITH(datarootdir, [ --with-datarootdir Use datarootdir as the data root directory.], [datarootdir="\${prefix}/${withval}"], [datarootdir="\${prefix}/share"]) AC_ARG_WITH(docdir, [ --with-docdir Install documentation in this directory.], [docdir="\${prefix}/${withval}"], [docdir="\${datarootdir}/doc"]) AC_ARG_WITH(htmldir, [ --with-htmldir Install html in this directory.], [htmldir="\${prefix}/${withval}"], [htmldir="\${docdir}"]) AC_SUBST(datarootdir) AC_SUBST(docdir) AC_SUBST(htmldir) AC_OUTPUT(Makefile)