.Dd March 7, 2011 .Dt ld 1 .Os Darwin .Sh NAME .Nm ld .Nd "linker" .Sh SYNOPSIS .Nm files... .Op options .Op Fl o Ar outputfile .Sh DESCRIPTION The .Nm ld command combines several object files and libraries, resolves references, and produces an ouput file. .Nm ld can produce a final linked image (executable, dylib, or bundle), or with the -r option, produce another object file. If the -o option is not used, the output file produced is named "a.out". .Ss Universal The linker accepts universal (multiple-architecture) input files, but always creates a "thin" (single-architecture), standard Mach-O output file. The architecture for the output file is specified using the -arch option. If this option is not used, .Nm ld attempts to determine the output architecture by examining the object files in command line order. The first "thin" architecture determines that of the output file. If no input object file is a "thin" file, the native 32-bit architecture for the host is used. .Pp Usually, .Nm ld is not used directly. Instead the .Xr gcc(1) compiler driver invokes .Nm ld. The compiler driver can be passed multiple -arch options and it will create a universal final linked image by invoking .Nm ld multiple times and then running .Xr lipo(1) merge the outputs into a universal file. .Ss Layout The object files are loaded in the order in which they are specified on the command line. The segments and the sections in those segments will appear in the output file in the order they are encountered in the object files being linked. All zero fill sections will appear after all non-zero fill sections in their segments. Sections created from files with the -sectcreate option will be laid out at after sections from .o files. The use of the -order_file option will alter the layout rules above, and move the symbols specified to start of their section. .Ss Libraries A static library (aka static archive) is a collection of .o files with a table of contents that lists the global symbols in the .o files. .Nm ld will only pull .o files out of a static library if needed to resolve some symbol reference. Unlike traditional linkers, .Nm ld will continually search a static library while linking. There is no need to specify a static library multiple times on the command line. .Pp A dynamic library (aka dylib or framework) is a final linked image. Putting a dynamic library on the command line causes two things: 1) The generated final linked image will have encoded that it depends on that dynamic library. 2) Exported symbols from the dynamic library are used to resolve references. .Pp Both dynamic and static libraries are searched as they appear on the command line. .Ss Search paths .Nm ld maintains a list of directories to search for a library or framework to use. The default library search path is /usr/lib then /usr/local/lib. The -L option will add a new library search path. The default framework search path is /Library/Frameworks then /System/Library/Frameworks. (Note: previously, /Network/Library/Frameworks was at the end of the default path. If you need that functionality, you need to explicitly add -F/Network/Library/Frameworks). The -F option will a new framework search path. The -Z option will remove the standard search paths. The -syslibroot option will prepend a prefix to all search paths. .Ss Two-level namespace By default all references resolved to a dynamic library record the library to which they were resolved. At runtime, dyld uses that information to directly resolve symbols. The alternative is to use the -flat_namespace option. With flat namespace, the library is not recorded. At runtime, dyld will search each dynamic library in load order when resolving symbols. This is slower, but more like how other operating systems resolve symbols. .Ss Indirect dynamic libraries If the command line specifies to link against dylib A, and when dylib A was built it linked against dylib B, then B is considered an indirect dylib. When linking for two-level namespace, ld does not look at indirect dylibs, except when re-exported by a direct dylibs. On the other hand when linking for flat namespace, ld does load all indirect dylibs and uses them to resolve references. Even though indirect dylibs are specified via a full path, .Nm ld first uses the specified search paths to locate each indirect dylib. If one cannot be found using the search paths, the full path is used. .Ss Dynamic libraries undefines When linking for two-level namespace, .Nm ld does not verify that undefines in dylibs actually exist. But when linking for flat namespace, .Nm ld does check that all undefines from all loaded dylibs have a matching definition. This is sometimes used to force selected functions to be loaded from a static library. .Sh OPTIONS .Ss Options that control the kind of output .Bl -tag .It Fl execute The default. Produce a mach-o main executable that has file type MH_EXECUTE. .It Fl dylib Produce a mach-o shared library that has file type MH_DYLIB. .It Fl bundle Produce a mach-o bundle that has file type MH_BUNDLE. .It Fl r Merges object files to produce another mach-o object file with file type MH_OBJECT. .It Fl dylinker Produce a mach-o dylinker that has file type MH_DYLINKER. Only used when building dyld. .It Fl dynamic The default. Implied by -dylib, -bundle, or -execute .It Fl static Produces a mach-o file that does not use the dyld. Only used building the kernel. .It Fl arch Ar arch_name Specifies which architecture (e.g. ppc, ppc64, i386, x86_64) the output file should be. .It Fl o Ar path Specifies the name and location of the output file. If not specified, `a.out' is used. .El .Ss Options that control libraries .Bl -tag .It Fl l Ns x This option tells the linker to search for libx.dylib or libx.a in the library search path. If string x is of the form y.o, then that file is searched for in the same places, but without prepending `lib' or appending `.a' or `.dylib' to the filename. .It Fl weak-l Ns Ar x This is the same as the -lx but forces the library and all references to it to be marked as weak imports. That is, the library is allowed to be missing at runtime. .It Fl weak_library Ar path_to_library This is the same as listing a file name path to a library on the link line except that it forces the library and all references to it to be marked as weak imports. .It Fl reexport-l Ns Ar x This is the same as the -lx but specifies that the all symbols in library x should be available to clients linking to the library being created. This was previously done with a separate -sub_library option. .It Fl reexport_library Ar path_to_library This is the same as listing a file name path to a library on the link line and it specifies that the all symbols in library path should be available to clients linking to the library being created. This was previously done with a separate -sub_library option. .It Fl lazy-l Ns Ar x This is the same as the -lx but it is only for shared libraries and the linker will construct glue code so that the shared library is not loaded until the first function in it is called. .It Fl lazy_library Ar path_to_library This is the same as listing a file name path to a shared library on the link line except that the linker will construct glue code so that the shared library is not loaded until the first function in it is called. .It Fl upward-l Ns Ar x This is the same as the -lx but specifies that the dylib is an upward dependency. .It Fl upward_library Ar path_to_library This is the same as listing a file name path to a library on the link line but also marks the dylib as an upward dependency. .It Fl L Ns dir Add .Ar dir to the list of directories in which to search for libraries. Directories specified with -L are searched in the order they appear on the command line and before the default search path. In Xcode4 and later, there can be a space between the -L and directory. .It Fl Z Do not search the standard directories when searching for libraries and frameworks. .It Fl syslibroot Ar rootdir Prepend .Ar rootdir to all search paths when searching for libraries or frameworks. .It Fl search_paths_first This is now the default (in Xcode4 tools). When processing -lx the linker now searches each directory in its library search paths for `libx.dylib' then `libx.a' before the moving on to the next path in the library search path. .It Fl search_dylibs_first Changes the searching behavior for libraries. The default is that when processing -lx the linker searches each directory in its library search paths for `libx.dylib' then `libx.a'. This option changes the behavior to first search for a file of the form `libx.dylib' in each directory in the library search path, then a file of the form `libx.a' is searched for in the library search paths. This option restores the search behavior of the linker prior to Xcode4. .It Fl framework Ar name[,suffix] This option tells the linker to search for `name.framework/name' the framework search path. If the optional suffix is specified the framework is first searched for the name with the suffix and then without (e.g. look for `name.framework/name_suffix' first, if not there try `name.framework/name'). .It Fl weak_framework Ar name[,suffix] This is the same as the -framework name[,suffix] but forces the framework and all references to it to be marked as weak imports. .It Fl reexport_framework Ar name[,suffix] This is the same as the -framework name[,suffix] but also specifies that the all symbols in that framework should be available to clients linking to the library being created. This was previously done with a separate -sub_umbrella option. .It Fl lazy_framework Ar name[,suffix] This is the same as the -framework name[,suffix] except that the linker will construct glue code so that the framework is not loaded until the first function in it is called. You cannot directly access data or Objective-C classes in a framework linked this way. .It Fl upward_framework Ar name[,suffix] This is the same as the -framework name[,suffix] but also specifies that the framework is an upward dependency. .It Fl F Ns dir Add .Ar dir to the list of directories in which to search for frameworks. Directories specified with -F are searched in the order they appear on the command line and before the default search path. In Xcode4 and later, there can be a space between the -F and directory. .It Fl all_load Loads all members of static archive libraries. .It Fl ObjC Loads all members of static archive libraries that implement an Objective-C class or category. .It Fl force_load Ar path_to_archive Loads all members of the specified static archive library. Note: -all_load forces all members of all archives to be loaded. This option allows you to target a specific archive. .El .Ss Options that control additional content .Bl -tag .It Fl sectcreate Ar segname sectname file The section .Ar sectname in the segment .Ar segname is created from the contents of file .Ar file. The combination of segname and sectname must be unique Ð there cannot already be a section (segname,sectname) from any other input. .It Fl filelist Ar file[,dirname] Specifies that the linker should link the files listed in .Ar file . This is an alternative to listing the files on the command line. The file names are listed one per line separated only by newlines. (Spaces and tabs are assumed to be part of the file name.) If the optional directory name, .Ar dirname is specified, it is prepended to each name in the list file. .It Fl dtrace Ar file Enables dtrace static probes when producing a final linked image. The file .Ar file must be a DTrace script which declares the static probes. .El .Ss Options that control optimizations .Bl -tag .It Fl dead_strip Remove functions and data that are unreachable by the entry point or exported symbols. .It Fl order_file Ar file Alters the order in which functions and data are laid out. For each section in the output file, any symbol in that section that are specified in the order file .Ar file is moved to the start of its section and laid out in the same order as in the order file .Ar file . Order files are text files with one symbol name per line. Lines starting with a # are comments. A symbol name may be optionally preceded with its object file leaf name and a colon (e.g. foo.o:_foo). This is useful for static functions/data that occur in multiple files. A symbol name may also be optionally preceded with the architecture (e.g. ppc:_foo or ppc:foo.o:_foo). This enables you to have one order file that works for multiple architectures. Literal c-strings may be ordered by by quoting the string (e.g. "Hello, world\\n") in the order file. .It Fl no_order_inits When the -order_file option is not used, the linker lays out functions in object file order and it moves all initializer routines to the start of the __text section and terminator routines to the end. Use this option to disable the automatic rearrangement of initializers and terminators. .It Fl no_order_data By default the linker reorders global data in the __DATA segment so that all global variables that dyld will need to adjust at launch time will early in the __DATA segment. This reduces the number of dirty pages at launch time. This option disables that optimization. .It Fl macosx_version_min Ar version This is set to indicate the oldest Mac OS X version that that the output is to be used on. Specifying a later version enables the linker to assumes features of that OS in the output file. The format of .Ar version is a Mac OS X version number such as 10.4 or 10.5 .It Fl ios_version_min Ar version This is set to indicate the oldest iOS version that that the output is to be used on. Specifying a later version enables the linker to assumes features of that OS in the output file. The format of .Ar version is an iOS version number such as 3.1 or 4.0 .It Fl image_base Ar address Specifies the perferred load address for a dylib or bundle. The argument .Ar address is a hexadecimal number with an optional leading 0x. By choosing non-overlapping address for all dylibs and bundles that a program loads, launch time can be improved because dyld will not need to "rebase" the image (that is, adjust pointers within the image to work at the loaded address). It is often easier to not use this option, but instead use the rebase(1) tool, and give it a list of dylibs. It will then choose non-overlapping addresses for the list and rebase them all. This option is also called -seg1addr for compatibility. .It Fl no_implicit_dylibs When creating a two-level namespace final linked image, normally the linker will hoist up public dylibs that are implicitly linked to make the two-level namespace encoding more efficient for dyld. For example, Cocoa re-exports AppKit and AppKit re-exports Foundation. If you link with -framework Cocoa and use a symbol from Foundation, the linker will implicitly add a load command to load Foundation and encode the symbol as coming from Foundation. If you use this option, the linker will not add a load command for Foundation and encode the symbol as coming from Cocoa. Then at runtime dyld will have to search Cocoa and AppKit before finding the symbol in Foundation. .It Fl exported_symbols_order Ar file When targeting Mac OS X 10.6 or later, the format of the exported symbol information can be optimized to make lookups of popular symbols faster. This option is used to pass a file containing a list of the symbols most frequently used by clients of the dynamic library being built. Not all exported symbols need to be listed. .It Fl no_zero_fill_sections By default the linker moves all zero fill sections to the end of the __DATA segment and configures them to use no space on disk. This option suppresses that optimization, so zero-filled data occupies space on disk in a final linked image. .It Fl merge_zero_fill_sections Causes all zero-fill sections in the __DATA segment to be merged into one __zerofill section. .El .Ss Options when creating a dynamic library (dylib) .Bl -tag .It Fl install_name Ar name Sets an internal "install path" (LC_ID_DYLIB) in a dynamic library. Any clients linked against the library will record that path as the way dyld should locate this library. If this option is not specified, then the -o path will be used. This option is also called -dylib_install_name for compatibility. .It Fl mark_dead_strippable_dylib Specifies that the dylib being built can be dead strip by any client. That is, the dylib has no initialization side effects. So if a client links against the dylib, but never uses any symbol from it, the linker can optimize away the use of the dylib. .It Fl compatibility_version Ar number Specifies the compatibility version number of the library. When a library is loaded by dyld, the compatibility version is checked and if the program's version is greater that the library's version, it is an error. The format of .Ar number is X[.Y[.Z]] where X must be a positive non-zero number less than or equal to 65535, and .Y and .Z are optional and if present must be non-negative numbers less than or equal to 255. If the compatibility version number is not specified, it has a value of 0 and no checking is done when the library is used. This option is also called -dylib_compatibility_version for compatibility. .It Fl current_version Ar number Specifies the current version number of the library. The current version of the library can be obtained programmatically by the user of the library so it can determine exactly which version of the library it is using. The format of .Ar number is X[.Y[.Z]] where X must be a positive non-zero number less than or equal to 65535, and .Y and .Z are optional and if present must be non-negative numbers less than or equal to 255. If the version number is not specified, it has a value of 0. This option is also called -dylib_current_version for compatibility. .El .Ss Options when creating a main executable .Bl -tag .It Fl pie This makes a special kind of main executable that is position independent (PIE). On Mac OS X 10.5 and later, the OS the OS will load a PIE at a random address each time it is executed. You cannot create a PIE from .o files compiled with -mdynamic-no-pic. That means the codegen is less optimal, but the address randomization adds some security. When targeting Mac OS X 10.7 or later PIE is the default for main executables. .It Fl no_pie Do not make a position independent executable (PIE). This is the default, when targeting 10.6 and earlier. .It Fl pagezero_size Ar size By default the linker creates an unreadable segment starting at address zero named __PAGEZERO. Its existence will cause a bus error if a NULL pointer is dereferenced. The argument .Ar size is a hexadecimal number with an optional leading 0x. If .Ar size is zero, the linker will not generate a page zero segment. By default on 32-bit architectures the page zero size is 4KB. On 64-bit architectures, the default size is 4GB. The ppc64 architecture has some special cases. Since Mac OS X 10.4 did not support 4GB page zero programs, the default page zero size for ppc64 will be 4KB unless -macosx_version_min is 10.5 or later. Also, the -mdynamic-no-pic codegen model for ppc64 will only work if the code is placed in the lower 2GB of the address space, so the if the linker detects any such code, the page zero size is set to 4KB and then a new unreadable trailing segment is created after the code, filling up the lower 4GB. .It Fl stack_size Ar size Specifies the maximum stack size for the main thread in a program. Without this option a program has a 8MB stack. The argument .Ar size is a hexadecimal number with an optional leading 0x. The .Ar size should be an even multiple of 4KB, that is the last three hexadecimal digits should be zero. .It Fl allow_stack_execute Marks executable so that all stacks in the task will be given stack execution privilege. This includes pthread stacks. .El .Ss Options when creating a bundle .Bl -tag .It Fl bundle_loader Ar executable This specifies the .Ar executable that will be loading the bundle output file being linked. Undefined symbols from the bundle are checked against the specified .Ar executable like it was one of the dynamic libraries the bundle was linked with. .El .Ss Options when creating an object file .Bl -tag .It Fl keep_private_externs Don't turn private external (aka visibility=hidden) symbols into static symbols, but rather leave them as private external in the resulting object file. .It Fl d Force definition of common symbols. That is, transform tentative definitions into real definitions. .El .Ss Options that control symbol resolution .Bl -tag .It Fl exported_symbols_list Ar filename The specified .Ar filename contains a list of global symbol names that will remain as global symbols in the output file. All other global symbols will be treated as if they were marked as __private_extern__ (aka visibility=hidden) and will not be global in the output file. The symbol names listed in filename must be one per line. Leading and trailing white space are not part of the symbol name. Lines starting with # are ignored, as are lines with only white space. Some wildcards (similar to shell file matching) are supported. The * matches zero or more characters. The ? matches one character. [abc] matches one character which must be an 'a', 'b', or 'c'. [a-z] matches any single lower case letter from 'a' to 'z'. .It Fl exported_symbol Ar symbol The specified .Ar symbol is added to the list of global symbols names that will remain as global symbols in the output file. This option can be used multiple times. For short lists, this can be more convenient than creating a file and using -exported_symbols_list. .It Fl unexported_symbols_list Ar file The specified .Ar filename contains a list of global symbol names that will not remain as global symbols in the output file. The symbols will be treated as if they were marked as __private_extern__ (aka visibility=hidden) and will not be global in the output file. The symbol names listed in filename must be one per line. Leading and trailing white space are not part of the symbol name. Lines starting with # are ignored, as are lines with only white space. Some wildcards (similar to shell file matching) are supported. The * matches zero or more characters. The ? matches one character. [abc] matches one character which must be an 'a', 'b', or 'c'. [a-z] matches any single lower case letter from 'a' to 'z'. .It Fl unexported_symbol Ar symbol The specified .Ar symbol is added to the list of global symbols names that will not remain as global symbols in the output file. This option can be used multiple times. For short lists, this can be more convenient than creating a file and using -unexported_symbols_list. .It Fl reexported_symbols_list Ar file The specified .Ar filename contains a list of symbol names that are implemented in a dependent dylib and should be re-exported through the dylib being created. .It Fl alias Ar symbol_name Ar alternate_symbol_name Create an alias named .Ar alternate_symbol_name for the symbol .Ar symbol_name . By default the alias symbol has global visibility. This option was previous the -idef:indir option. .It Fl alias_list Ar filename The specified .Ar filename contains a list of aliases. The symbol name and its alias are on one line, separated by whitespace. Lines starting with # are ignored. .It Fl flat_namespace Alters how symbols are resolved at build time and runtime. With -two_levelnamespace (the default), the linker only searches dylibs on the command line for symbols, and records in which dylib they were found. With -flat_namespace, the linker searches all dylibs on the command line and all dylibs those original dylibs depend on. The linker does not record which dylib an external symbol came from, so at runtime dyld again searches all images and uses the first definition it finds. In addition, any undefines in loaded flat_namespace dylibs must be resolvable at build time. .It Fl u Ar symbol_name Specified that symbol .Ar symbol_name must be defined for the link to succeed. This is useful to force selected functions to be loaded from a static library. .It Fl U Ar symbol_name Specified that it is ok for .Ar symbol_name to have no definition. With -two_levelnamespace, the resulting symbol will be marked dynamic_lookup which means dyld will search all loaded images. .It Fl undefined Ar treatment Specifies how undefined symbols are to be treated. Options are: error, warning, suppress, or dynamic_lookup. The default is error. .It Fl rpath Ar path Add .Ar path to the runpath search path list for image being created. At runtime, dyld uses the runpath when searching for dylibs whose load path begins with @rpath/. .It Fl commons Ar treatment Specifies how commons (aka tentative definitions) are resolved with respect to dylibs. Options are: ignore_dylibs, use_dylibs, error. The default is ignore_dylibs which means the linker will turn a tentative definition in an object file into a real definition and not even check dylibs for conflicts. The dylibs option means the linker should check linked dylibs for definitions and use them to replace tentative definitions from object files. The error option means the linker should issue an error whenever a tentative definition in an object file conflicts with an external symbol in a linked dylib. See also -warn_commons. .El .Ss Options for introspecting the linker .Bl -tag .It Fl why_load Log why each object file in a static library is loaded. That is, what symbol was needed. Also called -whyload for compatibility. .It Fl why_live Ar symbol_name Logs a chain of references to .Ar symbol_name . Only applicable with -dead_strip . It can help debug why something that you think should be dead strip removed is not removed. .It Fl print_statistics Logs information about the amount of memory and time the linker used. .It Fl t Logs each file (object, archive, or dylib) the linker loads. Useful for debugging problems with search paths where the wrong library is loaded. .It Fl whatsloaded Logs just object files the linker loads. .It Fl order_file_statistics Logs information about the processing of a -order_file. .It Fl map Ar map_file_path Writes a map file to the specified path which details all symbols and their addresses in the output image. .El .Ss Options for controling symbol table optimizations .Bl -tag .It Fl S Do not put debug information (STABS or DWARF) in the output file. .It Fl x Do not put non-global symbols in the output file's symbol table. Non-global symbols are useful when debugging and getting symbol names in back traces, but are not used at runtime. If -x is used with -r non-global symbol names are not removed, but instead replaced with a unique, dummy name that will be automatically removed when linked into a final linked image. This allows dead code stripping, which uses symbols to break up code and data, to work properly and provides the security of having source symbol names removed. .It Fl non_global_symbols_strip_list Ar filename The specified .Ar filename contains a list of non-global symbol names that should be removed from the output file's symbol table. All other non-global symbol names will remain in the output files symbol table. See -exported_symbols_list for syntax and use of wildcards. .It Fl non_global_symbols_no_strip_list Ar filename The specified .Ar filename contains a list of non-global symbol names that should be remain in the output file's symbol table. All other symbol names will be removed from the output file's symbol table. See -exported_symbols_list for syntax and use of wildcards. .El .Ss Rarely used Options .Bl -tag .It Fl v Prints the version of the linker. .It Fl allow_heap_execute Normally i386 main executables will be marked so that the Mac OS X 10.7 and later kernel will only allow pages with the x-bit to execute instructions. This option overrides that behavior and allows instructions on any page to be executed. .It Fl no_eh_labels Normally in -r mode, the linker produces .eh labels on all FDEs in the __eh_frame section. This option suppresses those labels. Those labels are not needed by the Mac OS X 10.6 linker but are needed by earlier linker tools. .It Fl warn_compact_unwind When producing a final linked image, the linker processes the __eh_frame section and produces an __unwind_info section. Most FDE entries in the __eh_frame can be represented by a 32-bit value in the __unwind_info section. The option issues a warning for any function whose FDE cannot be expressed in the compact unwind format. .It Fl warn_weak_exports Issue a warning if the resulting final linked image contains weak external symbols. Such symbols require dyld to do extra work at launch time to coalesce those symbols. .It Fl objc_gc_compaction Marks the Objective-C image info in the final linked image with the bit that says that the code was built to work the compacting garbage collection. .It Fl objc_gc Verifies all code was compiled with -fobjc-gc or -fobjc-gc-only. .It Fl objc_gc_only Verifies all code was compiled with -fobjc-gc-only. .It Fl dead_strip_dylibs Remove dylibs that are unreachable by the entry point or exported symbols. That is, suppresses the generation of load command commands for dylibs which supplied no symbols during the link. This option should not be used when linking against a dylib which is required at runtime for some indirect reason such as the dylib has an important initializer. .It Fl allow_sub_type_mismatches Normally the linker considers different cpu-subtype for ARM (e.g. armv4t and armv6) to be different different architectures that cannot be mixed at build time. This option relaxes that requirement, allowing you to mix object files compiled for different ARM subtypes. .It Fl no_uuid Do not generate an LC_UUID load command in the output file. .It Fl root_safe Sets the MH_ROOT_SAFE bit in the mach header of the output file. .It Fl setuid_safe Sets the MH_SETUID_SAFE bit in the mach header of the output file. .It Fl interposable Indirects access to all to exported symbols when creating a dynamic library. .It Fl init Ar symbol_name The specified symbol_name will be run as the first initializer. Only used when creating a dynamic library. .It Fl sub_library Ar library_name The specified dylib will be re-exported. For example the library_name for /usr/lib/libobjc_profile.A.dylib would be libobjc. Only used when creating a dynamic library. .It Fl sub_umbrella Ar framework_name The specified framework will be re-exported. Only used when creating a dynamic library. .It Fl allowable_client Ar name Restricts what can link against the dynamic library being created. By default any code can link against any dylib. But if a dylib is supposed to be private to a small set of clients, you can formalize that by adding a -allowable_client for each client. If a client is libfoo.1.dylib its -allowable_client name would be "foo". If a client is Foo.framework its -allowable_client name would be "Foo". For the degenerate case where you want no one to ever link against a dylib, you can set the -allowable_client to "!". .It Fl client_name Ar name Enables a bundle to link against a dylib that was built with -allowable_client. The name specified must match one of the -allowable_client names specified when the dylib was created. .It Fl umbrella Ar framework_name Specifies that the dylib being linked is re-exported through an umbrella framework of the specified name. .It Fl headerpad Ar size Specifies the minimum space for future expansion of the load commands. Only useful if intend to run install_name_tool to alter the load commands later. Size is a hexadecimal number. .It Fl headerpad_max_install_names Automatically adds space for future expansion of load commands such that all paths could expand to MAXPATHLEN. Only useful if intend to run install_name_tool to alter the load commands later. Size is a hexadecimal number. .It Fl bind_at_load Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily. .It Fl force_flat_namespace Sets a bit in the mach header of the resulting binary which tells dyld to not only use flat namespace for the binary, but force flat namespace binding on all dylibs and bundles loaded in the process. Can only be used when linking main executables. .It Fl sectalign Ar segname Ar sectname Ar value The section named sectname in the segment segname will have its alignment set to value, where value is a hexadecimal number that must be an integral power of 2. .It Fl stack_addr Ar address Specifies the initial address of the stack pointer value, where value is a hexadecimal number rounded to a page boundary. .It Fl segprot Ar segname Ar max_prot Ar init_prot Specifies the maximum and initial virtual memory protection of the named segment, name, to be max and init ,respectively. The values for max and init are any combination of the characters `r' (for read), `w' (for write), `x' (for execute) and `-' (no access). .It Fl seg_addr_table Ar filename Specifies a file containing base addresses for dynamic libraries. Each line of the file is a hexadecimal base address followed by whitespace then the install name of the corresponding dylib. The # character denotes a comment. .It Fl segs_read_write_addr Ar address Allows a dynamic library to be built where the read-only and read-write segments are not contiguous. The address specified is a hexadecimal number that indicates the base address for the read-write segments. .It Fl segs_read_only_addr Ar address Allows a dynamic library to be built where the read-only and read-write segments are not contiguous. The address specified is a hexadecimal number that indicates the base address for the read-only segments. .It Fl segaddr Ar name Ar address Specifies the starting address of the segment named name to be address. The address must be a hexadecimal number that is a multiple of 4K page size. .It Fl seg_page_size Ar name Ar size Specifies the page size used by the specified segment. By default the page size is 4096 for all segments. The linker will lay out segments such that size of a segment is always an even multiple of its page size. .It Fl dylib_file Ar install_name:file_name Specifies that a dynamic shared library is in a different location than its standard location. Use this option when you link with a library that is dependent on a dynamic library, and the dynamic library is in a location other than its default location. install_name specifies the path where the library normally resides. file_name specifies the path of the library you want to use instead. For example, if you link to a library that depends upon the dynamic library libsys and you have libsys installed in a nondefault location, you would use this option: -dylib_file /lib/libsys_s.A.dylib:/me/lib/libsys_s.A.dylib. .It Fl prebind The created output file will be in the prebound format. This was used in Mac OS X 10.3 and earlier to improve launch performance. .It Fl weak_reference_mismatches Ar treatment Specifies what to do if a symbol is weak-imported in one object file but not weak-imported in another. The valid treatments are: error, weak, or non-weak. The default is non-weak. .It Fl read_only_relocs Ar treatment Enables the use of relocations which will cause dyld to modify (copy-on-write) read-only pages. The compiler will normally never generate such code. .It Fl force_cpusubtype_ALL The is only applicable with -arch ppc. It tells the linker to ignore the PowerPC cpu requirements (e.g. G3, G4 or G5) encoded in the object files and mark the resulting binary as runnable on any PowerPC cpu. .It Fl dylinker_install_name Ar path Only used when building dyld. .It Fl no_arch_warnings Suppresses warning messages about files that have the wrong architecture for the -arch flag .It Fl arch_errors_fatal Turns into errors, warnings about files that have the wrong architecture for the -arch flag. .It Fl e Ar symbol_name Specifies the entry point of a main executable. By default the entry name is "start" which is found in crt1.o which contains the glue code need to set up and call main(). .It Fl w Suppress all warning messages .It Fl final_output Ar name Specifies the install name of a dylib if -install_name is not used. This option is used by gcc driver when it is invoked with multiple -arch arguments. .It Fl arch_multiple Specifes that the linker should augment error and warning messages with the architecture name. This option is used by gcc driver when it is invoked with multiple -arch arguments. .It Fl twolevel_namespace_hints Specifies that hints should be added to the resulting binary that can help speed up runtime binding by dyld as long as the libraries being linked against have not changed. .It Fl dot Ar path Create a file at the specified path containing a graph of symbol dependencies. The .dot file can be viewed in GraphViz. .It Fl keep_relocs Add section based relocation records to a final linked image. These relocations are ignored at runtime by dyld. .It Fl warn_stabs Print a warning when the linker cannot do a BINCL/EINCL optimization because the compiler put a bad stab symbol inside a BINCL/EINCL range. .It Fl warn_commons Print a warning whenever the a tentative definition in an object file is found and a external symbol by the same name is also found in a linked dylib. This often means that the extern keyword is missing from a variable declaration in a header file. .It Fl read_only_stubs [i386 only] Makes the __IMPORT segment of a final linked images read-only. This option makes a program slightly more secure in that the JMP instructions in the i386 fast stubs cannot be easily overwritten by malicious code. The downside is the dyld must use mprotect() to temporarily make the segment writable while it is binding the stubs. .It Fl slow_stubs [i386 only] Instead of using single JMP instruction stubs, the linker creates code in the __TEXT segment which calls through a lazy pointer in the __DATA segment. .It Fl interposable_list Ar filename The specified .Ar filename contains a list of global symbol names that should always be accessed indirectly. For instance, if libSystem.dylib is linked such that _malloc is interposable, then calls to malloc() from within libSystem will go through a dyld stub and could potentially indirected to an alternate malloc. If libSystem.dylib were built without making _malloc interposable then if _malloc was interposed at runtime, calls to malloc from with libSystem would be missed (not interposed) because they would be direct calls. .It Fl no_function_starts By default the linker creates a compress table of function start addresses in the LINKEDIT of final linked image. This option disables that behavior. .It Fl no_version_load_command By default the linker creates a load command in final linked images that contains the -macosx_version_min. This option disables that behavior. .It Fl no_objc_category_merging By default when producing final linked image, the linker will optimize Objective-C classes by merging any categories on a class into the class. Both the class and its categories must be defined in the image being linked for the optimization to occur. Using this option disables that behavior. .It Fl object_path_lto Ar filename When performing Link Time Optimization (LTO) and a temporary mach-o object file is needed, if this option is used, the temporary file will be stored at the specified path and remain after the link is complete. Without the option, the linker picks a path and deletes the object file before the linker tool completes, thus tools such as the debugger or dsymutil will not be able to access the DWARF debug info in the temporary object file. .It Fl page_align_data_atoms During development, this option can be used to space out all global variables so each is on a separate page. This is useful when analyzing dirty and resident pages. The information can then be used to create an order file to cluster commonly used/dirty globals onto the same page(s). .El .Ss Obsolete Options .Bl -tag .It Fl segalign Ar value All segments must be page aligned. This option is obsolete. .It Fl seglinkedit Object files (MH_OBJECT) with a LINKEDIT segment are no longer supported. This option is obsolete. .It Fl noseglinkedit This is the default. This option is obsolete. .It Fl fvmlib Fixed VM shared libraries (MH_FVMLIB) are no longer supported. This option is obsolete. .It Fl preload Preload executables (MH_PRELOAD) are no longer supported. This option is obsolete. .It Fl sectobjectsymbols Ar segname Ar sectname Adding a local label at a section start is no longer supported. This option is obsolete. .It Fl nofixprebinding The MH_NOFIXPREBINDING bit of mach_headers has been ignored since Mac OS X 10.3.9. This option is obsolete. .It Fl noprebind_all_twolevel_modules Multi-modules in dynamic libraries have been ignored at runtime since Mac OS X 10.4.0. This option is obsolete. .It Fl prebind_all_twolevel_modules Multi-modules in dynamic libraries have been ignored at runtime since Mac OS X 10.4.0. This option is obsolete. .It Fl prebind_allow_overlap When using -prebind, the linker allows overlapping by default, so this option is obsolete. .It Fl noprebind LD_PREBIND is no longer supported as a way to force on prebinding, so there no longer needs to be a command line way to override LD_PREBIND. This option is obsolete. .It Fl sect_diff_relocs Ar treatment This option was an attempt to warn about linking .o files compiled without -mdynamic-no-pic into a main executable, but the false positive rate generated too much noise to make the option useful. This option is obsolete. .It Fl run_init_lazily This option was removed in Mac OS X 10.2. .It Fl single_module This is now the default so does not need to be specified. .It Fl multi_module Multi-modules in dynamic libraries have been ignored at runtime since Mac OS X 10.4.0. This option is obsolete. .It Fl no_dead_strip_inits_and_terms The linker never dead strips initialization and termination routines. They are considered "roots" of the dead strip graph. .It Fl A Ar basefile Obsolete incremental load format. This option is obsolete. .It Fl b Used with -A option to strip base file's symbols. This option is obsolete. ..It Fl M Obsolete option to produce a load map. Use -map option instead. .It Fl Sn Don't strip any symbols. This is the default. This option is obsolete. .It Fl Si Optimize stabs debug symbols to remove duplicates. This is the default. This option is obsolete. .It Fl Sp Write minimal stabs which causes the debugger to open and read the original .o file for full stabs. This style of debugging is obsolete in Mac OS X 10.5. This option is obsolete. .It Fl X Strip local symbols that being the 'L'. This is the default. This option is obsolete. .It Fl s Completely strip the output, including removing the symbol table. This file format variant is no longer supported. This option is obsolete. .It Fl m Don't treat multiple definitions as an error. This is no longer supported. This option is obsolete. .It Fl y Ns symbol Display each file in which .Ar symbol is used. This was previously used to debug where an undefined symbol was used, but the linker now automatically prints out all usages. The -why_live option can also be used to display what kept a symbol from being dead striped. This option is obsolete. .It Fl Y Ar number Used to control how many occurrences of each symbol specified with -y would be shown. This option is obsolete. .It Fl nomultidefs Only used when linking an umbrella framework. Sets the MH_NOMULTIDEFS bit in the mach_header. The MH_NOMULTIDEFS bit has been obsolete since Mac OS X 10.4. This option is obsolete. .It Fl multiply_defined_unused Ar treatment Previously provided a way to warn or error if any of the symbol definitions in the output file matched any definitions in dynamic library being linked. This option is obsolete. .It Fl multiply_defined Ar treatment Previously provided a way to warn or error if any of the symbols used from a dynamic library were also available in another linked dynamic library. This option is obsolete. .It Fl private_bundle Previously prevented errors when -flat_namespace, -bundle, and -bundle_loader were used and the bundle contained a definition that conflicted with a symbol in the main executable. The linker no longer errors on such conflicts. This option is obsolete. .It Fl noall_load This is the default. This option is obsolete. .It Fl seg_addr_table_filename Ar path Use .Ar path instead of the install name of the library for matching an entry in the seg_addr_table. This option is obsolete. .It Fl sectorder Ar segname sectname orderfile Replaced by more general -order_file option. .It Fl sectorder_detail Produced extra logging about which entries from a sectorder entries were used. Replaced by -order_file_statistics. This option is obsolete. .El .Sh SEE ALSO as(1), ar(1), cc(1), nm(1), otool(1) lipo(1), arch(3), dyld(3), Mach-O(5), strip(1), rebase(1)