Makefile.in   [plain text]

# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  Makefile.am
#
#  $Id: Makefile.in,v 1.2 2004/08/10 22:20:28 luesang Exp $
#
#  The iODBC driver manager.
#  
#  Copyright (C) 1999-2002 by OpenLink Software <iodbc@openlinksw.com>
#  All Rights Reserved.
#
#  This software is released under the terms of either of the following
#  licenses:
#
#      - GNU Library General Public License (see LICENSE.LGPL) 
#      - The BSD License (see LICENSE.BSD).
#
#  While not mandated by the BSD license, any patches you make to the
#  iODBC source code may be contributed back into the iODBC project
#  at your discretion. Contributions will benefit the Open Source and
#  Data Access community as a whole. Submissions may be made at:
#
#      http://www.iodbc.org
#
#
#  GNU Library Generic Public License Version 2
#  ============================================
#  This library is free software; you can redistribute it and/or
#  modify it under the terms of the GNU Library General Public
#  License as published by the Free Software Foundation; either
#  version 2 of the License, or (at your option) any later version.
#
#  This library is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
#  Library General Public License for more details.
#
#  You should have received a copy of the GNU Library General Public
#  License along with this library; if not, write to the Free
#  Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
#
#  The BSD License
#  ===============
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions
#  are met:
#
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in
#     the documentation and/or other materials provided with the
#     distribution.
#  3. Neither the name of OpenLink Software Inc. nor the names of its
#     contributors may be used to endorse or promote products derived
#     from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL OPENLINK OR
#  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
#  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
#  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
#  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
#  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
#  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AS = @AS@
AWK = @AWK@
CC = @CC@
CPP = @CPP@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBADD_DL = @LIBADD_DL@
LIBADD_OS = @LIBADD_OS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
STRIP = @STRIP@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
inidir = @inidir@
install_sh = @install_sh@
lib_version = @lib_version@
odbcmode = @odbcmode@

DATEBUILD = `date +%d/%m/%Y_%T`

@GTK_TRUE@noinst_LTLIBRARIES = libiodbcadm-gtk.la

INCLUDES = \
	-I$(top_srcdir)/include \
	-I$(top_srcdir)/iodbc \
	-I$(top_srcdir)/iodbcadm \
	-I$(top_srcdir)/iodbcinst \
	@GTK_CFLAGS@


AM_CFLAGS = \
	@CFLAGS@ -D__GTK__ -DDATEBUILD=\"$(DATEBUILD)\"


libiodbcadm_gtk_la_LDFLAGS = #-static
libiodbcadm_gtk_la_LIBADD = @GTK_LIBS@
libiodbcadm_gtk_la_SOURCES = \
	administrator.c \
	confirm.c \
	connectionpooling.c \
	driverchooser.c \
	driversetup.c \
	dsnchooser.c \
	errorbox.c \
	filedsn.c \
	main.c \
	messagebox.c \
	translatorchooser.c 

EXTRA_libiodbcadm_gtk_la_SOURCES = question.xpm

CLEANFILES = confirm.c question.xpm

noinst_HEADERS = error.xpm img.xpm odbc4.xpm gui.h
subdir = iodbcadm/gtk
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)

libiodbcadm_gtk_la_DEPENDENCIES =
am_libiodbcadm_gtk_la_OBJECTS = administrator.lo confirm.lo \
	connectionpooling.lo driverchooser.lo driversetup.lo \
	dsnchooser.lo errorbox.lo filedsn.lo main.lo messagebox.lo \
	translatorchooser.lo
libiodbcadm_gtk_la_OBJECTS = $(am_libiodbcadm_gtk_la_OBJECTS)

DEFS = @DEFS@
DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/include
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
depcomp = $(SHELL) $(top_srcdir)/admin/depcomp
am__depfiles_maybe = depfiles
@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/administrator.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/confirm.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/connectionpooling.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/driverchooser.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/driversetup.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/dsnchooser.Plo ./$(DEPDIR)/errorbox.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/filedsn.Plo ./$(DEPDIR)/main.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/messagebox.Plo \
@AMDEP_TRUE@	./$(DEPDIR)/translatorchooser.Plo
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
CFLAGS = @CFLAGS@
DIST_SOURCES = $(libiodbcadm_gtk_la_SOURCES) \
	$(EXTRA_libiodbcadm_gtk_la_SOURCES)
HEADERS = $(noinst_HEADERS)

DIST_COMMON = $(noinst_HEADERS) Makefile.am Makefile.in
SOURCES = $(libiodbcadm_gtk_la_SOURCES) $(EXTRA_libiodbcadm_gtk_la_SOURCES)

all: all-am

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  iodbcadm/gtk/Makefile
Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test -z "$dir" && dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libiodbcadm-gtk.la: $(libiodbcadm_gtk_la_OBJECTS) $(libiodbcadm_gtk_la_DEPENDENCIES) 
	$(LINK)  $(libiodbcadm_gtk_la_LDFLAGS) $(libiodbcadm_gtk_la_OBJECTS) $(libiodbcadm_gtk_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT) core *.core

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/administrator.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/confirm.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/connectionpooling.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/driverchooser.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/driversetup.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsnchooser.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/errorbox.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filedsn.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/messagebox.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/translatorchooser.Plo@am__quote@

distclean-depend:
	-rm -rf ./$(DEPDIR)

.c.o:
@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<

.c.obj:
@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
	$(COMPILE) -c `cygpath -w $<`

.c.lo:
@AMDEP_TRUE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
CCDEPMODE = @CCDEPMODE@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@list='$(DISTFILES)'; for file in $$list; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES) $(HEADERS)

installdirs:

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
	mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-compile distclean-depend \
	distclean-generic distclean-libtool distclean-tags

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am:

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

uninstall-am: uninstall-info-am

.PHONY: GTAGS all all-am check check-am clean clean-generic \
	clean-libtool clean-noinstLTLIBRARIES distclean \
	distclean-compile distclean-depend distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am info \
	info-am install install-am install-data install-data-am \
	install-exec install-exec-am install-info install-info-am \
	install-man install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool tags uninstall uninstall-am \
	uninstall-info-am


confirm.c: $(top_srcdir)/drvproxy/gtk/confirm.c
	-rm -f question.xpm confirm.c
	$(LN_S) $(top_srcdir)/drvproxy/gtk/question.xpm question.xpm
	$(LN_S) $(top_srcdir)/drvproxy/gtk/confirm.c confirm.c
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: