# Makefile.in generated by automake 1.6.3 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Makefile.am # # $Id: Makefile.in,v 1.2 2004/08/10 22:20:22 luesang Exp $ # # The iODBC driver manager. # # Copyright (C) 1999-2002 by OpenLink Software # All Rights Reserved. # # This software is released under the terms of either of the following # licenses: # # - GNU Library General Public License (see LICENSE.LGPL) # - The BSD License (see LICENSE.BSD). # # While not mandated by the BSD license, any patches you make to the # iODBC source code may be contributed back into the iODBC project # at your discretion. Contributions will benefit the Open Source and # Data Access community as a whole. Submissions may be made at: # # http://www.iodbc.org # # # GNU Library Generic Public License Version 2 # ============================================ # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Library General Public # License as published by the Free Software Foundation; either # version 2 of the License, or (at your option) any later version. # # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # # You should have received a copy of the GNU Library General Public # License along with this library; if not, write to the Free # Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # # # The BSD License # =============== # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name of OpenLink Software Inc. nor the names of its # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL OPENLINK OR # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR # PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ AMTAR = @AMTAR@ AS = @AS@ AWK = @AWK@ CC = @CC@ CPP = @CPP@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_CONFIG = @GTK_CONFIG@ GTK_LIBS = @GTK_LIBS@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LIBADD_DL = @LIBADD_DL@ LIBADD_OS = @LIBADD_OS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ MAINT = @MAINT@ OBJDUMP = @OBJDUMP@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ STRIP = @STRIP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ inidir = @inidir@ install_sh = @install_sh@ lib_version = @lib_version@ odbcmode = @odbcmode@ @GTK_TRUE@noinst_LTLIBRARIES = libdrvproxy-gtk.la INCLUDES = \ -I$(top_srcdir)/include -I$(top_srcdir)/iodbc \ @GTK_CFLAGS@ -D __GTK__ libdrvproxy_gtk_la_LDFLAGS = #-static libdrvproxy_gtk_la_LIBADD = @GTK_LIBS@ libdrvproxy_gtk_la_SOURCES = \ confirm.c \ gensetup.c \ loginbox.c noinst_HEADERS = \ gui.h \ question.xpm subdir = drvproxy/gtk mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_CLEAN_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libdrvproxy_gtk_la_DEPENDENCIES = am_libdrvproxy_gtk_la_OBJECTS = confirm.lo gensetup.lo loginbox.lo libdrvproxy_gtk_la_OBJECTS = $(am_libdrvproxy_gtk_la_OBJECTS) DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ depcomp = $(SHELL) $(top_srcdir)/admin/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/confirm.Plo ./$(DEPDIR)/gensetup.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/loginbox.Plo COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ CFLAGS = @CFLAGS@ DIST_SOURCES = $(libdrvproxy_gtk_la_SOURCES) HEADERS = $(noinst_HEADERS) DIST_COMMON = $(noinst_HEADERS) Makefile.am Makefile.in SOURCES = $(libdrvproxy_gtk_la_SOURCES) all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --gnu drvproxy/gtk/Makefile Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test -z "$dir" && dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libdrvproxy-gtk.la: $(libdrvproxy_gtk_la_OBJECTS) $(libdrvproxy_gtk_la_DEPENDENCIES) $(LINK) $(libdrvproxy_gtk_la_LDFLAGS) $(libdrvproxy_gtk_la_OBJECTS) $(libdrvproxy_gtk_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/confirm.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gensetup.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loginbox.Plo@am__quote@ distclean-depend: -rm -rf ./$(DEPDIR) .c.o: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(COMPILE) -c `cygpath -w $<` .c.lo: @AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< CCDEPMODE = @CCDEPMODE@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = ../.. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @list='$(DISTFILES)'; for file in $$list; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ mostlyclean-am distclean: distclean-am distclean-am: clean-am distclean-compile distclean-depend \ distclean-generic distclean-libtool distclean-tags dvi: dvi-am dvi-am: info: info-am info-am: install-data-am: install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool uninstall-am: uninstall-info-am .PHONY: GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES distclean \ distclean-compile distclean-depend distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am info \ info-am install install-am install-data install-data-am \ install-exec install-exec-am install-info install-info-am \ install-man install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool tags uninstall uninstall-am \ uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: