# Microsoft Developer Studio Generated NMAKE File, Based on agraph.dsp
!IF "$(CFG)" == ""
CFG=agraph - Win32 Debug
!MESSAGE No configuration specified. Defaulting to agraph - Win32 Debug.
!ENDIF
!IF "$(CFG)" != "agraph - Win32 Release" && "$(CFG)" != "agraph - Win32 Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running NMAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE NMAKE /f "agraph.mak" CFG="agraph - Win32 Debug"
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "agraph - Win32 Release" (based on "Win32 (x86) Static Library")
!MESSAGE "agraph - Win32 Debug" (based on "Win32 (x86) Static Library")
!MESSAGE
!ERROR An invalid configuration is specified.
!ENDIF
!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE
NULL=nul
!ENDIF
!IF "$(CFG)" == "agraph - Win32 Release"
OUTDIR=.\Release
INTDIR=.\Release
# Begin Custom Macros
OutDir=.\Release
# End Custom Macros
ALL : "$(OUTDIR)\agraph.lib"
CLEAN :
-@erase "$(INTDIR)\agerror.obj"
-@erase "$(INTDIR)\apply.obj"
-@erase "$(INTDIR)\attr.obj"
-@erase "$(INTDIR)\edge.obj"
-@erase "$(INTDIR)\flatten.obj"
-@erase "$(INTDIR)\grammar.obj"
-@erase "$(INTDIR)\graph.obj"
-@erase "$(INTDIR)\id.obj"
-@erase "$(INTDIR)\imap.obj"
-@erase "$(INTDIR)\io.obj"
-@erase "$(INTDIR)\mem.obj"
-@erase "$(INTDIR)\node.obj"
-@erase "$(INTDIR)\obj.obj"
-@erase "$(INTDIR)\pend.obj"
-@erase "$(INTDIR)\rec.obj"
-@erase "$(INTDIR)\refstr.obj"
-@erase "$(INTDIR)\scan.obj"
-@erase "$(INTDIR)\subg.obj"
-@erase "$(INTDIR)\utils.obj"
-@erase "$(INTDIR)\vc60.idb"
-@erase "$(INTDIR)\write.obj"
-@erase "$(OUTDIR)\agraph.lib"
"$(OUTDIR)" :
if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
CPP=cl.exe
CPP_PROJ=/nologo /ML /W3 /GX /O2 /I "." /I ".." /I "../cdt" /D "NDEBUG" /D "MSWIN32" /D "HAVE_CONFIG_H" /D "WIN32" /D "_MBCS" /D "_LIB" /D YY_NEVER_INTERACTIVE=1 /Fp"$(INTDIR)\agraph.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c
.c{$(INTDIR)}.obj::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cpp{$(INTDIR)}.obj::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cxx{$(INTDIR)}.obj::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.c{$(INTDIR)}.sbr::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cpp{$(INTDIR)}.sbr::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cxx{$(INTDIR)}.sbr::
$(CPP) @<<
$(CPP_PROJ) $<
<<
RSC=rc.exe
BSC32=bscmake.exe
BSC32_FLAGS=/nologo /o"$(OUTDIR)\agraph.bsc"
BSC32_SBRS= \
LIB32=link.exe -lib
LIB32_FLAGS=/nologo /out:"$(OUTDIR)\agraph.lib"
LIB32_OBJS= \
"$(INTDIR)\agerror.obj" \
"$(INTDIR)\apply.obj" \
"$(INTDIR)\attr.obj" \
"$(INTDIR)\edge.obj" \
"$(INTDIR)\flatten.obj" \
"$(INTDIR)\grammar.obj" \
"$(INTDIR)\graph.obj" \
"$(INTDIR)\id.obj" \
"$(INTDIR)\imap.obj" \
"$(INTDIR)\io.obj" \
"$(INTDIR)\mem.obj" \
"$(INTDIR)\node.obj" \
"$(INTDIR)\obj.obj" \
"$(INTDIR)\pend.obj" \
"$(INTDIR)\rec.obj" \
"$(INTDIR)\refstr.obj" \
"$(INTDIR)\scan.obj" \
"$(INTDIR)\subg.obj" \
"$(INTDIR)\utils.obj" \
"$(INTDIR)\write.obj"
"$(OUTDIR)\agraph.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
$(LIB32) @<<
$(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
<<
SOURCE="$(InputPath)"
DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep
ALL : $(DS_POSTBUILD_DEP)
# Begin Custom Macros
OutDir=.\Release
# End Custom Macros
$(DS_POSTBUILD_DEP) : "$(OUTDIR)\agraph.lib"
copy .\Release\agraph.lib ..\makearch\win32\static\Release
echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)"
!ELSEIF "$(CFG)" == "agraph - Win32 Debug"
OUTDIR=.\Debug
INTDIR=.\Debug
# Begin Custom Macros
OutDir=.\Debug
# End Custom Macros
ALL : "$(OUTDIR)\agraph.lib"
CLEAN :
-@erase "$(INTDIR)\agerror.obj"
-@erase "$(INTDIR)\apply.obj"
-@erase "$(INTDIR)\attr.obj"
-@erase "$(INTDIR)\edge.obj"
-@erase "$(INTDIR)\flatten.obj"
-@erase "$(INTDIR)\grammar.obj"
-@erase "$(INTDIR)\graph.obj"
-@erase "$(INTDIR)\id.obj"
-@erase "$(INTDIR)\imap.obj"
-@erase "$(INTDIR)\io.obj"
-@erase "$(INTDIR)\mem.obj"
-@erase "$(INTDIR)\node.obj"
-@erase "$(INTDIR)\obj.obj"
-@erase "$(INTDIR)\pend.obj"
-@erase "$(INTDIR)\rec.obj"
-@erase "$(INTDIR)\refstr.obj"
-@erase "$(INTDIR)\scan.obj"
-@erase "$(INTDIR)\subg.obj"
-@erase "$(INTDIR)\utils.obj"
-@erase "$(INTDIR)\vc60.idb"
-@erase "$(INTDIR)\vc60.pdb"
-@erase "$(INTDIR)\write.obj"
-@erase "$(OUTDIR)\agraph.lib"
"$(OUTDIR)" :
if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
CPP=cl.exe
CPP_PROJ=/nologo /MLd /W3 /Gm /GX /ZI /Od /I ".." /I "." /I "../cdt" /D "_DEBUG" /D "MSWIN32" /D "HAVE_CONFIG_H" /D "WIN32" /D "_MBCS" /D "_LIB" /D YY_NEVER_INTERACTIVE=1 /Fp"$(INTDIR)\agraph.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c
.c{$(INTDIR)}.obj::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cpp{$(INTDIR)}.obj::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cxx{$(INTDIR)}.obj::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.c{$(INTDIR)}.sbr::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cpp{$(INTDIR)}.sbr::
$(CPP) @<<
$(CPP_PROJ) $<
<<
.cxx{$(INTDIR)}.sbr::
$(CPP) @<<
$(CPP_PROJ) $<
<<
RSC=rc.exe
BSC32=bscmake.exe
BSC32_FLAGS=/nologo /o"$(OUTDIR)\agraph.bsc"
BSC32_SBRS= \
LIB32=link.exe -lib
LIB32_FLAGS=/nologo /out:"$(OUTDIR)\agraph.lib"
LIB32_OBJS= \
"$(INTDIR)\agerror.obj" \
"$(INTDIR)\apply.obj" \
"$(INTDIR)\attr.obj" \
"$(INTDIR)\edge.obj" \
"$(INTDIR)\flatten.obj" \
"$(INTDIR)\grammar.obj" \
"$(INTDIR)\graph.obj" \
"$(INTDIR)\id.obj" \
"$(INTDIR)\imap.obj" \
"$(INTDIR)\io.obj" \
"$(INTDIR)\mem.obj" \
"$(INTDIR)\node.obj" \
"$(INTDIR)\obj.obj" \
"$(INTDIR)\pend.obj" \
"$(INTDIR)\rec.obj" \
"$(INTDIR)\refstr.obj" \
"$(INTDIR)\scan.obj" \
"$(INTDIR)\subg.obj" \
"$(INTDIR)\utils.obj" \
"$(INTDIR)\write.obj"
"$(OUTDIR)\agraph.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
$(LIB32) @<<
$(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
<<
SOURCE="$(InputPath)"
DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep
ALL : $(DS_POSTBUILD_DEP)
# Begin Custom Macros
OutDir=.\Debug
# End Custom Macros
$(DS_POSTBUILD_DEP) : "$(OUTDIR)\agraph.lib"
copy .\Debug\agraph.lib ..\makearch\win32\static\Debug
echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)"
!ENDIF
!IF "$(NO_EXTERNAL_DEPS)" != "1"
!IF EXISTS("agraph.dep")
!INCLUDE "agraph.dep"
!ELSE
!MESSAGE Warning: cannot find "agraph.dep"
!ENDIF
!ENDIF
!IF "$(CFG)" == "agraph - Win32 Release" || "$(CFG)" == "agraph - Win32 Debug"
SOURCE=.\agerror.c
"$(INTDIR)\agerror.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\apply.c
"$(INTDIR)\apply.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\attr.c
"$(INTDIR)\attr.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\edge.c
"$(INTDIR)\edge.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\flatten.c
"$(INTDIR)\flatten.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\grammar.c
"$(INTDIR)\grammar.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\graph.c
"$(INTDIR)\graph.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\id.c
"$(INTDIR)\id.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\imap.c
"$(INTDIR)\imap.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\io.c
"$(INTDIR)\io.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\mem.c
"$(INTDIR)\mem.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\node.c
"$(INTDIR)\node.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\obj.c
"$(INTDIR)\obj.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\pend.c
"$(INTDIR)\pend.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\rec.c
"$(INTDIR)\rec.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\refstr.c
"$(INTDIR)\refstr.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\scan.c
"$(INTDIR)\scan.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\subg.c
"$(INTDIR)\subg.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\utils.c
"$(INTDIR)\utils.obj" : $(SOURCE) "$(INTDIR)"
SOURCE=.\write.c
"$(INTDIR)\write.obj" : $(SOURCE) "$(INTDIR)"
!ENDIF