# diff.info-2   [plain text]

This is Info file diff.info, produced by Makeinfo-1.55 from the input
file ./diff.texi.

This file documents the the GNU diff', diff3', sdiff', and cmp'
commands for showing the differences between text files and the patch'
command for using their output to update files.

Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a
translation approved by the Foundation.

File: diff.info,  Node: Line Group Formats,  Next: Line Formats,  Up: If-then-else

Line Group Formats
------------------

Line group formats let you specify formats suitable for many
applications that allow if-then-else input, including programming
languages and text formatting languages.  A line group format specifies
the output format for a contiguous group of similar lines.

For example, the following command compares the TeX files old' and
new', and outputs a merged file in which old regions are surrounded by
\begin{em}'-\end{em}' lines, and new regions are surrounded by
\begin{bf}'-\end{bf}' lines.

diff \
--old-group-format='\begin{em}
%<\end{em}
' \
--new-group-format='\begin{bf}
%>\end{bf}
' \
old new

The following command is equivalent to the above example, but it is a
little more verbose, because it spells out the default line group
formats.

diff \
--old-group-format='\begin{em}
%<\end{em}
' \
--new-group-format='\begin{bf}
%>\end{bf}
' \
--unchanged-group-format='%=' \
--changed-group-format='\begin{em}
%<\end{em}
\begin{bf}
%>\end{bf}
' \
old new

Here is a more advanced example, which outputs a diff listing with
headers containing line numbers in a "plain English" style.

diff \
--unchanged-group-format='' \
--old-group-format='-------- %dn line%(n=1?:s) deleted at %df:
%<' \
--new-group-format='-------- %dN line%(N=1?:s) added after %de:
%>' \
--changed-group-format='-------- %dn line%(n=1?:s) changed at %df:
%<-------- to:
%>' \
old new

To specify a line group format, use diff' with one of the options
listed below.  You can specify up to four line group formats, one for
each kind of line group.  You should quote FORMAT, because it typically
contains shell metacharacters.

--old-group-format=FORMAT'
These line groups are hunks containing only lines from the first
file.  The default old group format is the same as the changed
group format if it is specified; otherwise it is a format that
outputs the line group as-is.

--new-group-format=FORMAT'
These line groups are hunks containing only lines from the second
file.  The default new group format is same as the the changed
group format if it is specified; otherwise it is a format that
outputs the line group as-is.

--changed-group-format=FORMAT'
These line groups are hunks containing lines from both files.  The
default changed group format is the concatenation of the old and
new group formats.

--unchanged-group-format=FORMAT'
These line groups contain lines common to both files.  The default
unchanged group format is a format that outputs the line group
as-is.

In a line group format, ordinary characters represent themselves;
conversion specifications start with %' and have one of the following
forms.

%<'
stands for the lines from the first file, including the trailing
newline.  Each line is formatted according to the old line format
(*note Line Formats::.).

%>'
stands for the lines from the second file, including the trailing
newline.  Each line is formatted according to the new line format.

%='
stands for the lines common to both files, including the trailing
newline.  Each line is formatted according to the unchanged line
format.

%%'
stands for %'.

%c'C''
where C is a single character, stands for C.  C may not be a
backslash or an apostrophe.  For example, %c':'' stands for a
colon, even inside the then-part of an if-then-else format, which
a colon would normally terminate.

%c'\O''
where O is a string of 1, 2, or 3 octal digits, stands for the
character with octal code O.  For example, %c'\0'' stands for a
null character.

FN'
where F is a printf' conversion specification and N is one of the
following letters, stands for N's value formatted with F.

e'
The line number of the line just before the group in the old
file.

f'
The line number of the first line in the group in the old
file; equals E + 1.

l'
The line number of the last line in the group in the old file.

m'
The line number of the line just after the group in the old
file; equals L + 1.

n'
The number of lines in the group in the old file; equals L -
F + 1.

E, F, L, M, N'
Likewise, for lines in the new file.

The printf' conversion specification can be %d', %o', %x', or
%X', specifying decimal, octal, lower case hexadecimal, or upper
case hexadecimal output respectively.  After the %' the following
options can appear in sequence: a -' specifying
left-justification; an integer specifying the minimum field width;
and a period followed by an optional integer specifying the
minimum number of digits.  For example, %5dN' prints the number
of new lines in the group in a field of width 5 characters, using
the printf' format "%5d"'.

(A=B?T:E)'
If A equals B then T else E.  A and B are each either a decimal
constant or a single letter interpreted as above.  This format
spec is equivalent to T if A's value equals B's; otherwise it is
equivalent to E.

For example, %(N=0?no:%dN) line%(N=1?:s)' is equivalent to no
lines' if N (the number of lines in the group in the the new file)
is 0, to 1 line' if N is 1, and to %dN lines' otherwise.

File: diff.info,  Node: Line Formats,  Next: Detailed If-then-else,  Prev: Line Group Formats,  Up: If-then-else

Line Formats
------------

Line formats control how each line taken from an input file is
output as part of a line group in if-then-else format.

For example, the following command outputs text with a one-column
change indicator to the left of the text.  The first column of output
is -' for deleted lines, |' for added lines, and a space for
unchanged lines.  The formats contain newline characters where newlines
are desired on output.

diff \
--old-line-format='-%l
' \
--new-line-format='|%l
' \
--unchanged-line-format=' %l
' \
old new

To specify a line format, use one of the following options.  You
should quote FORMAT, since it often contains shell metacharacters.

--old-line-format=FORMAT'
formats lines just from the first file.

--new-line-format=FORMAT'
formats lines just from the second file.

--unchanged-line-format=FORMAT'
formats lines common to both files.

--line-format=FORMAT'
formats all lines; in effect, it sets all three above options
simultaneously.

In a line format, ordinary characters represent themselves;
conversion specifications start with %' and have one of the following
forms.

%l'
stands for the the contents of the line, not counting its trailing
newline (if any).  This format ignores whether the line is
incomplete; *Note Incomplete Lines::.

%L'
stands for the the contents of the line, including its trailing
newline (if any).  If a line is incomplete, this format preserves
its incompleteness.

%%'
stands for %'.

%c'C''
where C is a single character, stands for C.  C may not be a
backslash or an apostrophe.  For example, %c':'' stands for a
colon.

%c'\O''
where O is a string of 1, 2, or 3 octal digits, stands for the
character with octal code O.  For example, %c'\0'' stands for a
null character.

Fn'
where F is a printf' conversion specification, stands for the
line number formatted with F.  For example, %.5dn' prints the
line number using the printf' format "%.5d"'.  *Note Line Group
Formats::, for more about printf conversion specifications.

The default line format is %l' followed by a newline character.

If the input contains tab characters and it is important that they
line up on output, you should ensure that %l' or %L' in a line format
is just after a tab stop (e.g. by preceding %l' or %L' with a tab
character), or you should use the -t' or --expand-tabs' option.

Taken together, the line and line group formats let you specify many
different formats.  For example, the following command uses a format
similar to diff''s normal format.  You can tailor this command to get
fine control over diff''s output.

diff \
--old-line-format='< %l
' \
--new-line-format='> %l
' \
--old-group-format='%df%(f=l?:,%dl)d%dE
%<' \
--new-group-format='%dea%dF%(F=L?:,%dL)
%>' \
--changed-group-format='%df%(f=l?:,%dl)c%dF%(F=L?:,%dL)
%<---
%>' \
--unchanged-group-format='' \
old new

File: diff.info,  Node: Detailed If-then-else,  Next: Example If-then-else,  Prev: Line Formats,  Up: If-then-else

Detailed Description of If-then-else Format
-------------------------------------------

For lines common to both files, diff' uses the unchanged line group
format.  For each hunk of differences in the merged output format, if
the hunk contains only lines from the first file, diff' uses the old
line group format; if the hunk contains only lines from the second
file, diff' uses the new group format; otherwise, diff' uses the
changed group format.

The old, new, and unchanged line formats specify the output format of
lines from the first file, lines from the second file, and lines common
to both files, respectively.

The option --ifdef=NAME' is equivalent to the following sequence of
options using shell syntax:

--old-group-format='#ifndef NAME
%<#endif /* not NAME */
' \
--new-group-format='#ifdef NAME
%>#endif /* NAME */
' \
--unchanged-group-format='%=' \
--changed-group-format='#ifndef NAME
%<#else /* NAME */
%>#endif /* NAME */
'

You should carefully check the diff' output for proper nesting.
For example, when using the the -D NAME' or --ifdef=NAME' option, you
should check that if the differing lines contain any of the C
preprocessor directives #ifdef', #ifndef', #else', #elif', or
#endif', they are nested properly and match.  If they don't, you must
make corrections manually.  It is a good idea to carefully check the
resulting code anyway to make sure that it really does what you want it
to; depending on how the input files were produced, the output might
contain duplicate or otherwise incorrect code.

The patch' -D NAME' option behaves just like the diff' -D NAME'
option, except it operates on a file and a diff to produce a merged
file; *Note patch Options::.

File: diff.info,  Node: Example If-then-else,  Prev: Detailed If-then-else,  Up: If-then-else

An Example of If-then-else Format
---------------------------------

Here is the output of diff -DTWO lao tzu' (*note Sample diff
Input::., for the complete contents of the two files):

#ifndef TWO
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
#endif /* not TWO */
The Nameless is the origin of Heaven and Earth;
#ifndef TWO
The Named is the mother of all things.
#else /* TWO */
The named is the mother of all things.

#endif /* TWO */
Therefore let there always be non-being,
so we may see their subtlety,
And let there always be being,
so we may see their outcome.
The two are the same,
But after they are produced,
they have different names.
#ifdef TWO
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
#endif /* TWO */

File: diff.info,  Node: Comparing Directories,  Next: Adjusting Output,  Prev: Output Formats,  Up: Top

Comparing Directories
*********************

You can use diff' to compare some or all of the files in two
directory trees.  When both file name arguments to diff' are
directories, it compares each file that is contained in both
directories, examining file names in alphabetical order.  Normally
diff' is silent about pairs of files that contain no differences, but
if you use the -s' or --report-identical-files' option, it reports
pairs of identical files.  Normally diff' reports subdirectories
common to both directories without comparing subdirectories' files, but
if you use the -r' or --recursive' option, it compares every
corresponding pair of files in the directory trees, as many levels deep
as they go.

For file names that are in only one of the directories, diff'
normally does not show the contents of the file that exists; it reports
only that the file exists in that directory and not in the other.  You
can make diff' act as though the file existed but was empty in the
other directory, so that it outputs the entire contents of the file that
actually exists.  (It is output as either an insertion or a deletion,
depending on whether it is in the first or the second directory given.)
To do this, use the -N' or --new-file' option.

If the older directory contains one or more large files that are not
in the newer directory, you can make the patch smaller by using the
-P' or --unidirectional-new-file' option instead of -N'.  This
option is like -N' except that it only inserts the contents of files
that appear in the second directory but not the first (that is, files
that were added).  At the top of the patch, write instructions for the
user applying the patch to remove the files that were deleted before
applying the patch.  *Note Making Patches::, for more discussion of
making patches for distribution.

To ignore some files while comparing directories, use the -x
PATTERN' or --exclude=PATTERN' option.  This option ignores any files
or subdirectories whose base names match the shell pattern PATTERN.
Unlike in the shell, a period at the start of the base of a file name
matches a wildcard at the start of a pattern.  You should enclose
PATTERN in quotes so that the shell does not expand it.  For example,
the option -x '*.[ao]'' ignores any file whose name ends with .a' or
.o'.

This option accumulates if you specify it more than once.  For
example, using the options -x 'RCS' -x '*,v'' ignores any file or
subdirectory whose base name is RCS' or ends with ,v'.

If you need to give this option many times, you can instead put the
patterns in a file, one pattern per line, and use the -X FILE' or
--exclude-from=FILE' option.

If you have been comparing two directories and stopped partway
through, later you might want to continue where you left off.  You can
do this by using the -S FILE' or --starting-file=FILE' option.  This
compares only the file FILE and all alphabetically later files in the
topmost directory level.

File: diff.info,  Node: Adjusting Output,  Next: diff Performance,  Prev: Comparing Directories,  Up: Top

Making diff' Output Prettier
*****************************

diff' provides several ways to adjust the appearance of its output.
These adjustments can be applied to any output format.

* Tabs::		Preserving the alignment of tabstops.
* Pagination::		Page numbering and timestamping diff' output.

File: diff.info,  Node: Tabs,  Next: Pagination,  Up: Adjusting Output

Preserving Tabstop Alignment
============================

The lines of text in some of the diff' output formats are preceded
by one or two characters that indicate whether the text is inserted,
deleted, or changed.  The addition of those characters can cause tabs to
move to the next tabstop, throwing off the alignment of columns in the
line.  GNU diff' provides two ways to make tab-aligned columns line up
correctly.

The first way is to have diff' convert all tabs into the correct
number of spaces before outputting them; select this method with the
-t' or --expand-tabs' option.  diff' assumes that tabstops are set
every 8 columns.  To use this form of output with patch', you must
give patch' the -l' or --ignore-white-space' option (*note Changed

The other method for making tabs line up correctly is to add a tab
character instead of a space after the indicator character at the
beginning of the line.  This ensures that all following tab characters
are in the same position relative to tabstops that they were in the
original files, so that the output is aligned correctly.  Its
disadvantage is that it can make long lines too long to fit on one line
of the screen or the paper.  It also does not work with the unified
output format, which does not have a space character after the change
type indicator character.  Select this method with the -T' or
--initial-tab' option.

File: diff.info,  Node: Pagination,  Prev: Tabs,  Up: Adjusting Output

Paginating diff' Output
========================

It can be convenient to have long output page-numbered and
time-stamped.  The -l' and --paginate' options do this by sending the
diff' output through the pr' program.  Here is what the page header
might look like for diff -lc lao tzu':

Mar 11 13:37 1991  diff -lc lao tzu Page 1

File: diff.info,  Node: diff Performance,  Next: Comparing Three Files,  Prev: Adjusting Output,  Up: Top

****************************

GNU diff' runs quite efficiently; however, in some circumstances
you can cause it to run faster or produce a more compact set of changes.
There are two ways that you can affect the performance of GNU diff' by
changing the way it compares files.

Performance has more than one dimension.  These options improve one
aspect of performance at the cost of another, or they improve
performance in some cases while hurting it in others.

The way that GNU diff' determines which lines have changed always
comes up with a near-minimal set of differences.  Usually it is good
enough for practical purposes.  If the diff' output is large, you
might want diff' to use a modified algorithm that sometimes produces a
smaller set of differences.  The -d' or --minimal' option does this;
however, it can also cause diff' to run more slowly than usual, so it
is not the default behavior.

When the files you are comparing are large and have small groups of
changes scattered throughout them, you can use the -H' or
--speed-large-files' option to make a different modification to the
algorithm that diff' uses.  If the input files have a constant small
density of changes, this option speeds up the comparisons without
changing the output.  If not, diff' might produce a larger set of
differences; however, the output will still be correct.

Normally diff' discards the prefix and suffix that is common to
both files before it attempts to find a minimal set of differences.
This makes diff' run faster, but occasionally it may produce
non-minimal output.  The --horizon-lines=LINES' option prevents diff'
from discarding the last LINES lines of the prefix and the first LINES
lines of the suffix.  This gives diff' further opportunities to find a
minimal output.

File: diff.info,  Node: Comparing Three Files,  Next: diff3 Merging,  Prev: diff Performance,  Up: Top

Comparing Three Files
*********************

Use the program diff3' to compare three files and show any
differences among them.  (diff3' can also merge files; see *Note diff3
Merging::).

The "normal" diff3' output format shows each hunk of differences
without surrounding context.  Hunks are labeled depending on whether
they are two-way or three-way, and lines are annotated by their
location in the input files.

*Note Invoking diff3::, for more information on how to run diff3'.

* Sample diff3 Input::		Sample diff3' input for examples.
* Detailed diff3 Normal::	A detailed description of normal output format.
* diff3 Hunks::			The format of normal output format.
* Example diff3 Normal::	Sample output in the normal format.

File: diff.info,  Node: Sample diff3 Input,  Next: Detailed diff3 Normal,  Up: Comparing Three Files

A Third Sample Input File
=========================

Here is a third sample file that will be used in examples to
illustrate the output of diff3' and how various options can change it.
The first two files are the same that we used for diff' (*note Sample
diff Input::.).  This is the third sample file, called tao':

The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
The Nameless is the origin of Heaven and Earth;
The named is the mother of all things.

Therefore let there always be non-being,
so we may see their subtlety,
And let there always be being,
so we may see their result.
The two are the same,
But after they are produced,
they have different names.

-- The Way of Lao-Tzu, tr. Wing-tsit Chan

File: diff.info,  Node: Detailed diff3 Normal,  Next: diff3 Hunks,  Prev: Sample diff3 Input,  Up: Comparing Three Files

Detailed Description of diff3' Normal Format
=============================================

Each hunk begins with a line marked ===='.  Three-way hunks have
plain ====' lines, and two-way hunks have 1', 2', or 3' appended to
specify which of the three input files differ in that hunk.  The hunks
contain copies of two or three sets of input lines each preceded by one
or two commands identifying where the lines came from.

Normally, two spaces precede each copy of an input line to
distinguish it from the commands.  But with the -T' or --initial-tab'
option, diff3' uses a tab instead of two spaces; this lines up tabs

Commands take the following forms:

FILE:La'
This hunk appears after line L of file FILE, and contains no lines
in that file.  To edit this file to yield the other files, one
must append hunk lines taken from the other files.  For example,
1:11a' means that the hunk follows line 11 in the first file and
contains no lines from that file.

FILE:Rc'
This hunk contains the lines in the range R of file FILE.  The
range R is a comma-separated pair of line numbers, or just one
number if the range is a singleton.  To edit this file to yield the
other files, one must change the specified lines to be the lines
taken from the other files.  For example, 2:11,13c' means that
the hunk contains lines 11 through 13 from the second file.

If the last line in a set of input lines is incomplete (*note
Incomplete Lines::.), it is distinguished on output from a full line by
a following line that starts with \'.

File: diff.info,  Node: diff3 Hunks,  Next: Example diff3 Normal,  Prev: Detailed diff3 Normal,  Up: Comparing Three Files

diff3' Hunks
=============

Groups of lines that differ in two or three of the input files are
called "diff3 hunks", by analogy with diff' hunks (*note Hunks::.).
If all three input files differ in a diff3' hunk, the hunk is called a
"three-way hunk"; if just two input files differ, it is a "two-way
hunk".

As with diff', several solutions are possible.  When comparing the
files A', B', and C', diff3' normally finds diff3' hunks by
merging the two-way hunks output by the two commands diff A B' and
diff A C'.  This does not necessarily minimize the size of the output,
but exceptions should be rare.

For example, suppose F' contains the three lines a', b', f', G'
contains the lines g', b', g', and H' contains the lines a', b',
h'.  diff3 F G H' might output the following:

====2
1:1c
3:1c
a
2:1c
g
====
1:3c
f
2:3c
g
3:3c
h

because it found a two-way hunk containing a' in the first and third
files and g' in the second file, then the single line b' common to
all three files, then a three-way hunk containing the last line of each
file.

File: diff.info,  Node: Example diff3 Normal,  Prev: diff3 Hunks,  Up: Comparing Three Files

An Example of diff3' Normal Format
===================================

Here is the output of the command diff3 lao tzu tao' (*note Sample
diff3 Input::., for the complete contents of the files).  Notice that
it shows only the lines that are different among the three files.

====2
1:1,2c
3:1,2c
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
2:0a
====1
1:4c
The Named is the mother of all things.
2:2,3c
3:4,5c
The named is the mother of all things.

====3
1:8c
2:7c
so we may see their outcome.
3:9c
so we may see their result.
====
1:11a
2:11,13c
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
3:13,14c

-- The Way of Lao-Tzu, tr. Wing-tsit Chan

File: diff.info,  Node: diff3 Merging,  Next: Interactive Merging,  Prev: Comparing Three Files,  Up: Top

Merging From a Common Ancestor
******************************

When two people have made changes to copies of the same file,
diff3' can produce a merged output that contains both sets of changes
together with warnings about conflicts.

One might imagine programs with names like diff4' and diff5' to
compare more than three files simultaneously, but in practice the need
rarely arises.  You can use diff3' to merge three or more sets of
changes to a file by merging two change sets at a time.

diff3' can incorporate changes from two modified versions into a
common preceding version.  This lets you merge the sets of changes
represented by the two newer files.  Specify the common ancestor version
as the second argument and the two newer versions as the first and third
arguments, like this:

diff3 MINE OLDER YOURS

You can remember the order of the arguments by noting that they are in
alphabetical order.

You can think of this as subtracting OLDER from YOURS and adding the
result to MINE, or as merging into MINE the changes that would turn
OLDER into YOURS.  This merging is well-defined as long as MINE and
OLDER match in the neighborhood of each such change.  This fails to be
true when all three input files differ or when only OLDER differs; we
call this a "conflict".  When all three input files differ, we call the
conflict an "overlap".

diff3' gives you several ways to handle overlaps and conflicts.
You can omit overlaps or conflicts, or select only overlaps, or mark
conflicts with special <<<<<<<' and >>>>>>>' lines.

diff3' can output the merge results as an ed' script that that can
be applied to the first file to yield the merged output.  However, it
is usually better to have diff3' generate the merged output directly;
this bypasses some problems with ed'.

* Which Changes::		Selecting changes to incorporate.
* Marking Conflicts::		Marking conflicts.
* Bypassing ed::		Generating merged output directly.
* Merging Incomplete Lines::	How diff3' merges incomplete lines.
* Saving the Changed File::	Emulating System V behavior.

File: diff.info,  Node: Which Changes,  Next: Marking Conflicts,  Up: diff3 Merging

Selecting Which Changes to Incorporate
======================================

You can select all unmerged changes from OLDER to YOURS for merging
into MINE with the -e' or --ed' option.  You can select only the
nonoverlapping unmerged changes with -3' or --easy-only', and you can
select only the overlapping changes with -x' or --overlap-only'.

The -e', -3' and -x' options select only "unmerged changes", i.e.
changes where MINE and YOURS differ; they ignore changes from OLDER to
YOURS where MINE and YOURS are identical, because they assume that such
changes have already been merged.  If this assumption is not a safe
one, you can use the -A' or --show-all' option (*note Marking
Conflicts::.).

Here is the output of the command diff3' with each of these three
options (*note Sample diff3 Input::., for the complete contents of the
files).  Notice that -e' outputs the union of the disjoint sets of
changes output by -3' and -x'.

Output of diff3 -e lao tzu tao':
11a

-- The Way of Lao-Tzu, tr. Wing-tsit Chan
.
8c
so we may see their result.
.

Output of diff3 -3 lao tzu tao':
8c
so we may see their result.
.

Output of diff3 -x lao tzu tao':
11a

-- The Way of Lao-Tzu, tr. Wing-tsit Chan
.

File: diff.info,  Node: Marking Conflicts,  Next: Bypassing ed,  Prev: Which Changes,  Up: diff3 Merging

Marking Conflicts
=================

diff3' can mark conflicts in the merged output by bracketing them
with special marker lines.  A conflict that comes from two files A and
B is marked as follows:

<<<<<<< A
lines from A
=======
lines from B
>>>>>>> B

A conflict that comes from three files A, B and C is marked as
follows:

<<<<<<< A
lines from A
||||||| B
lines from B
=======
lines from C
>>>>>>> C

The -A' or --show-all' option acts like the -e' option, except
that it brackets conflicts, and it outputs all changes from OLDER to
YOURS, not just the unmerged changes.  Thus, given the sample input
files (*note Sample diff3 Input::.), diff3 -A lao tzu tao' puts
brackets around the conflict where only tzu' differs:

<<<<<<< tzu
=======
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
>>>>>>> tao

And it outputs the three-way conflict as follows:

<<<<<<< lao
||||||| tzu
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
=======

-- The Way of Lao-Tzu, tr. Wing-tsit Chan
>>>>>>> tao

The -E' or --show-overlap' option outputs less information than
the -A' or --show-all' option, because it outputs only unmerged
changes, and it never outputs the contents of the second file.  Thus
the -E' option acts like the -e' option, except that it brackets the
first and third files from three-way overlapping changes.  Similarly,
-X' acts like -x', except it brackets all its (necessarily
overlapping) changes.  For example, for the three-way overlapping
change above, the -E' and -X' options output the following:

<<<<<<< lao
=======

-- The Way of Lao-Tzu, tr. Wing-tsit Chan
>>>>>>> tao

If you are comparing files that have meaningless or uninformative
names, you can use the -L LABEL' or --label=LABEL' option to show
alternate names in the <<<<<<<', |||||||' and >>>>>>>' brackets.
This option can be given up to three times, once for each input file.
Thus diff3 -A -L X -L Y -L Z A B C' acts like diff3 -A A B C', except
that the output looks like it came from files named X', Y' and Z'
rather than from files named A', B' and C'.

File: diff.info,  Node: Bypassing ed,  Next: Merging Incomplete Lines,  Prev: Marking Conflicts,  Up: diff3 Merging

Generating the Merged Output Directly
=====================================

With the -m' or --merge' option, diff3' outputs the merged file
directly.  This is more efficient than using ed' to generate it, and
works even with non-text files that ed' would reject.  If you specify
-m' without an ed' script option, -A' (--show-all') is assumed.

For example, the command diff3 -m lao tzu tao' (*note Sample diff3
Input::. for a copy of the input files) would output the following:

<<<<<<< tzu
=======
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
>>>>>>> tao
The Nameless is the origin of Heaven and Earth;
The Named is the mother of all things.
Therefore let there always be non-being,
so we may see their subtlety,
And let there always be being,
so we may see their result.
The two are the same,
But after they are produced,
they have different names.
<<<<<<< lao
||||||| tzu
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
=======

-- The Way of Lao-Tzu, tr. Wing-tsit Chan
>>>>>>> tao

File: diff.info,  Node: Merging Incomplete Lines,  Next: Saving the Changed File,  Prev: Bypassing ed,  Up: diff3 Merging

How diff3' Merges Incomplete Lines
===================================

With -m', incomplete lines (*note Incomplete Lines::.) are simply
copied to the output as they are found; if the merged output ends in an
conflict and one of the input files ends in an incomplete line,
succeeding |||||||', =======' or >>>>>>>' brackets appear somewhere
other than the start of a line because they are appended to the
incomplete line.

Without -m', if an ed' script option is specified and an
incomplete line is found, diff3' generates a warning and acts as if a
newline had been present.

File: diff.info,  Node: Saving the Changed File,  Prev: Merging Incomplete Lines,  Up: diff3 Merging

Saving the Changed File
=======================

Traditional Unix diff3' generates an ed' script without the
trailing w' and and q' commands that save the changes.  System V
diff3' generates these extra commands.  GNU diff3' normally behaves
like traditional Unix diff3', but with the -i' option it behaves like
System V diff3' and appends the w' and q' commands.

The -i' option requires one of the ed' script options -AeExX3',
and is incompatible with the merged output option -m'.

File: diff.info,  Node: Interactive Merging,  Next: Merging with patch,  Prev: diff3 Merging,  Up: Top

Interactive Merging with sdiff'
********************************

With sdiff', you can merge two files interactively based on a
side-by-side -y' format comparison (*note Side by Side::.).  Use -o
FILE' or --output=FILE' to specify where to put the merged text.
*Note Invoking sdiff::, for more details on the options to sdiff'.

Another way to merge files interactively is to use the Emacs Lisp
package emerge'.  *Note emerge: (emacs)emerge, for more information.

* sdiff Option Summary::Summary of sdiff' options.
* Merge Commands::	Merging two files interactively.

File: diff.info,  Node: sdiff Option Summary,  Next: Merge Commands,  Up: Interactive Merging

Specifying diff' Options to sdiff'
====================================

The following sdiff' options have the same meaning as for diff'.
*Note diff Options::, for the use of these options.

-a -b -d -i -t -v
-B -H -I REGEXP

--ignore-blank-lines  --ignore-case
--ignore-matching-lines=REGEXP  --ignore-space-change
--left-column  --minimal  --speed-large-files
--suppress-common-lines  --expand-tabs
--text  --version  --width=COLUMNS

For historical reasons, sdiff' has alternate names for some
options.  The -l' option is equivalent to the --left-column' option,
and similarly -s' is equivalent to --suppress-common-lines'.  The
meaning of the sdiff' -w' and -W' options is interchanged from that
of diff': with sdiff', -w COLUMNS' is equivalent to
--width=COLUMNS', and -W' is equivalent to --ignore-all-space'.
sdiff' without the -o' option is equivalent to diff' with the -y'
or --side-by-side' option (*note Side by Side::.).

File: diff.info,  Node: Merge Commands,  Prev: sdiff Option Summary,  Up: Interactive Merging

Merge Commands
==============

Groups of common lines, with a blank gutter, are copied from the
first file to the output.  After each group of differing lines, sdiff'
prompts with %' and pauses, waiting for one of the following commands.
Follow each command with RET.

e'
Discard both versions.  Invoke a text editor on an empty temporary
file, then copy the resulting file to the output.

eb'
Concatenate the two versions, edit the result in a temporary file,
then copy the edited result to the output.

el'
Edit a copy of the left version, then copy the result to the
output.

er'
Edit a copy of the right version, then copy the result to the
output.

l'
Copy the left version to the output.

q'
Quit.

r'
Copy the right version to the output.

s'
Silently copy common lines.

v'
Verbosely copy common lines.  This is the default.

The text editor invoked is specified by the EDITOR' environment
variable if it is set.  The default is system-dependent.

File: diff.info,  Node: Merging with patch,  Next: Making Patches,  Prev: Interactive Merging,  Up: Top

Merging with patch'
********************

patch' takes comparison output produced by diff' and applies the
differences to a copy of the original file, producing a patched
version.  With patch', you can distribute just the changes to a set of
files instead of distributing the entire file set; your correspondents
can apply patch' to update their copy of the files with your changes.
patch' automatically determines the diff format, skips any leading or
trailing headers, and uses the headers to determine which file to
patch.  This lets your correspondents feed an article or message
containing a difference listing directly to patch'.

patch' detects and warns about common problems like forward
patches.  It saves the original version of the files it patches, and
saves any patches that it could not apply.  It can also maintain a
patchlevel.h' file to ensures that your correspondents apply diffs in
the proper order.

patch' accepts a series of diffs in its standard input, usually
separated by headers that specify which file to patch.  It applies
diff' hunks (*note Hunks::.) one by one.  If a hunk does not exactly
match the original file, patch' uses heuristics to try to patch the
file as well as it can.  If no approximate match can be found, patch'
rejects the hunk and skips to the next hunk.  patch' normally replaces
each file F with its new version, saving the original file in F.orig',
and putting reject hunks (if any) into F.rej'.

*Note Invoking patch::, for detailed information on the options to
patch'.  *Note Backups::, for more information on how patch' names
backup files.  *Note Rejects::, for more information on where patch'
puts reject hunks.

* patch Input::		Selecting the type of patch' input.
* Imperfect::		Dealing with imperfect patches.
* Empty Files::		Removing empty files after patching.
* Multiple Patches::	Handling multiple patches in a file specially.
* patch Messages::	Messages and questions patch' can produce.

File: diff.info,  Node: patch Input,  Next: Imperfect,  Up: Merging with patch

Selecting the patch' Input Format
==================================

patch' normally determines which diff' format the patch file uses
by examining its contents.  For patch files that contain particularly
confusing leading text, you might need to use one of the following
options to force patch' to interpret the patch file as a certain
format of diff.  The output formats listed here are the only ones that
patch' can understand.

-c'
--context'
context diff.

-e'
--ed'
ed' script.

-n'
--normal'
normal diff.

-u'
--unified'
unified diff.

File: diff.info,  Node: Imperfect,  Next: Empty Files,  Prev: patch Input,  Up: Merging with patch

Applying Imperfect Patches
==========================

patch' tries to skip any leading text in the patch file, apply the
diff, and then skip any trailing text.  Thus you can feed a news article
or mail message directly to patch', and it should work.  If the entire
diff is indented by a constant amount of white space, patch'
automatically ignores the indentation.

However, certain other types of imperfect input require user
intervention.

* Changed White Space::	When tabs and spaces don't match exactly.
* Reversed Patches::	Applying reversed patches correctly.
* Inexact::		Helping patch' find close matches.

File: diff.info,  Node: Changed White Space,  Next: Reversed Patches,  Up: Imperfect

Applying Patches with Changed White Space
-----------------------------------------

Sometimes mailers, editors, or other programs change spaces into
tabs, or vice versa.  If this happens to a patch file or an input file,
the files might look the same, but patch' will not be able to match
them properly.  If this problem occurs, use the -l' or
--ignore-white-space' option, which makes patch' compare white space
loosely so that any sequence of white space in the patch file matches
any sequence of white space in the input files.  Non-white-space
characters must still match exactly.  Each line of the context must
still match a line in the input file.

File: diff.info,  Node: Reversed Patches,  Next: Inexact,  Prev: Changed White Space,  Up: Imperfect

Applying Reversed Patches
-------------------------

Sometimes people run diff' with the new file first instead of
second.  This creates a diff that is "reversed".  To apply such
patches, give patch' the -R' or --reverse' option.  patch' then
attempts to swap each hunk around before applying it.  Rejects come out
in the swapped format.  The -R' option does not work with ed' scripts
because there is too little information in them to reconstruct the
reverse operation.

Often patch' can guess that the patch is reversed.  If the first
hunk of a patch fails, patch' reverses the hunk to see if it can apply
it that way.  If it can, patch' asks you if you want to have the -R'
option set; if it can't, patch' continues to apply the patch normally.
This method cannot detect a reversed patch if it is a normal diff and
the first command is an append (which should have been a delete) since
appends always succeed, because a null context matches anywhere.  But
most patches add or change lines rather than delete them, so most
reversed normal diffs begin with a delete, which fails, and patch'
notices.

If you apply a patch that you have already applied, patch' thinks
it is a reversed patch and offers to un-apply the patch.  This could be
construed as a feature.  If you did this inadvertently and you don't
want to un-apply the patch, just answer n' to this offer and to the
subsequent "apply anyway" question--or type C-c' to kill the patch'
process.

File: diff.info,  Node: Inexact,  Prev: Reversed Patches,  Up: Imperfect

Helping patch' Find Inexact Matches
------------------------------------

For context diffs, and to a lesser extent normal diffs, patch' can
detect when the line numbers mentioned in the patch are incorrect, and
it attempts to find the correct place to apply each hunk of the patch.
As a first guess, it takes the line number mentioned in the hunk, plus
or minus any offset used in applying the previous hunk.  If that is not
the correct place, patch' scans both forward and backward for a set of
lines matching the context given in the hunk.

First patch' looks for a place where all lines of the context
match.  If it cannot find such a place, and it is reading a context or
unified diff, and the maximum fuzz factor is set to 1 or more, then
patch' makes another scan, ignoring the first and last line of
context.  If that fails, and the maximum fuzz factor is set to 2 or
more, it makes another scan, ignoring the first two and last two lines
of context are ignored.  It continues similarly if the maximum fuzz
factor is larger.

The -F LINES' or --fuzz=LINES' option sets the maximum fuzz factor
to LINES.  This option only applies to context and unified diffs; it
ignores up to LINES lines while looking for the place to install a
hunk.  Note that a larger fuzz factor increases the odds of making a
faulty patch.  The default fuzz factor is 2; it may not be set to more
than the number of lines of context in the diff, ordinarily 3.

If patch' cannot find a place to install a hunk of the patch, it
writes the hunk out to a reject file (*note Rejects::., for information
on how reject files are named).  It writes out rejected hunks in context
format no matter what form the input patch is in.  If the input is a
normal or ed' diff, many of the contexts are simply null.  The line
numbers on the hunks in the reject file may be different from those in
the patch file: they show the approximate location where patch' thinks
the failed hunks belong in the new file rather than in the old one.

As it completes each hunk, patch' tells you whether the hunk
succeeded or failed, and if it failed, on which line (in the new file)
patch' thinks the hunk should go.  If this is different from the line
number specified in the diff, it tells you the offset.  A single large
offset *may* indicate that patch' installed a hunk in the wrong place.
patch' also tells you if it used a fuzz factor to make the match, in
which case you should also be slightly suspicious.

patch' cannot tell if the line numbers are off in an ed' script,
and can only detect wrong line numbers in a normal diff when it finds a
change or delete command.  It may have the same problem with a context
diff using a fuzz factor equal to or greater than the number of lines
of context shown in the diff (typically 3).  In these cases, you should
probably look at a context diff between your original and patched input
files to see if the changes make sense.  Compiling without errors is a
pretty good indication that the patch worked, but not a guarantee.

patch' usually produces the correct results, even when it must make
many guesses.  However, the results are guaranteed only when the patch
is applied to an exact copy of the file that the patch was generated
from.

File: diff.info,  Node: Empty Files,  Next: Multiple Patches,  Prev: Imperfect,  Up: Merging with patch

Removing Empty Files
====================

Sometimes when comparing two directories, the first directory
contains a file that the second directory does not.  If you give diff'
the -N' or --new-file' option, it outputs a diff that deletes the
contents of this file.  By default, patch' leaves an empty file after
applying such a diff.  The -E' or --remove-empty-files' option to
patch' deletes output files that are empty after applying the diff.

File: diff.info,  Node: Multiple Patches,  Next: patch Messages,  Prev: Empty Files,  Up: Merging with patch

Multiple Patches in a File
==========================

If the patch file contains more than one patch, patch' tries to
apply each of them as if they came from separate patch files.  This
means that it determines the name of the file to patch for each patch,
and that it examines the leading text before each patch for file names
and prerequisite revision level (*note Making Patches::., for more on
that topic).

For the second and subsequent patches in the patch file, you can give
options and another original file name by separating their argument
lists with a +'.  However, the argument list for a second or
subsequent patch may not specify a new patch file, since that does not
make sense.

For example, to tell patch' to strip the first three slashes from
the name of the first patch in the patch file and none from subsequent
patches, and to use code.c' as the first input file, you can use:

patch -p3 code.c + -p0 < patchfile

The -S' or --skip' option ignores the current patch from the patch
file, but continue looking for the next patch in the file.  Thus, to
ignore the first and third patches in the patch file, you can use:

patch -S + + -S + < patch file

File: diff.info,  Node: patch Messages,  Prev: Multiple Patches,  Up: Merging with patch

Messages and Questions from patch'
===================================

patch' can produce a variety of messages, especially if it has
trouble decoding its input.  In a few situations where it's not sure how
to proceed, patch' normally prompts you for more information from the
keyboard.  There are options to suppress printing non-fatal messages
and stopping for keyboard input.

The message Hmm...' indicates that patch' is reading text in the
patch file, attempting to determine whether there is a patch in that
text, and if so, what kind of patch it is.

You can inhibit all terminal output from patch', unless an error
occurs, by using the -s', --quiet', or --silent' option.

There are two ways you can prevent patch' from asking you any
questions.  The -f' or --force' option assumes that you know what you
are doing.  It assumes the following:

* skip patches that do not contain file names in their headers;

* patch files even though they have the wrong version for the
Prereq:' line in the patch;

* assume that patches are not reversed even if they look like they
are.

The -t' or --batch' option is similar to -f', in that it
suppresses questions, but it makes somewhat different assumptions:

* skip patches that do not contain file names in their headers (the
same as -f');

* skip patches for which the file has the wrong version for the
Prereq:' line in the patch;

* assume that patches are reversed if they look like they are.

`patch' exits with a non-zero status if it creates any reject files.
When applying a set of patches in a loop, you should check the exit
status, so you don't apply a later patch to a partially patched file.