testpattern.sample [plain text]
# Sample test pattern file, for use with Gimp-Print test pattern generator
# Printer/driver settings. Please see src/ghost/README for appropriate
# values for each of these settings
# Printer model
printer escp2-870;
# Resolution, or print quality
parameter Resolution 720sw;
# Media source (if appropriate for your printer)
parameter InputSlot Standard;
# Media type (what kind of paper)
parameter MediaType Photo;
# ink_type
parameter InkType PhotoCMYK;
# Paper size
parameter PageSize Letter;
# Dither algorithm
#parameter DitherAlgorithm Ordered;
parameter DitherAlgorithm UniTone;
mode RGB 8;
# Note that due to limitations in the lexical analyzer and parser, all
# floating point values must be specified with a decimal point.
# Placement settings
# Horizontal size, as fraction of paper width (defaults to 1.0)
hsize 0.33;
# Vertical size, as fraction of paper width (defaults to 1.0)
vsize 0.33;
# Left margin, as fraction of paper width (defaults to 0)
left 0.66;
# Top margin, as fraction of paper width (defaults to 0)
top 0.66;
# Output settings
# These settings are used as the base values for all ramps. These settings
# are multiplied by the appropriate values in each pattern definition
# to compute the effective gamma and conversion values. All of these
# default to 1.0.
# Gamma value applied to all inks
gamma 1.0;
# Additional gamma correction applied to cyan, magenta, yellow, and black inks
gamma cyan 1.0;
gamma magenta 1.0;
gamma yellow 1.0;
gamma black 1.0;
# Amount of each ink that should be used when black is converted to CMY.
# These values must be greater than 0 and must not exceed 10.
level cyan 1.0;
level magenta 1.0;
level yellow 1.0;
# Maximum amount of ink that will be printed, relative to solid coverage.
# 1.0 means that every dot position that can be printed will be. Normally
# at high resolutions less ink should be printed. This is similar to
# density in normal RGB mode, but does not affect photo ink conversion.
ink_limit 1.0;
# Density. Unlike normal RGB mode, the CMYK16 input mode used by the
# test pattern generator does not automatically scale the amount of ink
# used by the resolution and paper type (see ink_limit above). The test
# driver separates the functions of ink limiting and photo ink conversion
# to allow maximum control over the output.
density 1.0;
# Do we want a thin black line between each band? (default yes)
blackline 0;
# Number of steps in each ramp (default 256)
steps 16;
# Pattern specifiers
# BLACK RAMP BLACK BLACK CYAN MAGENTA YELLOW
# ENDPOINTS CONVERSION
# Lower Cyan Min Min Min Min
# Upper Magenta Max Max Max Max
# Yellow Gamma Gamma Gamma Gamma
# 0) White band
pattern 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 1) C sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 2) M sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0;
# 3) Y sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0;
# 4) Pure CMY sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0;
# 5) K sweep
pattern 0.0 0.0 1.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 6) Adjusted CMY sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 -2.0 1.0 0.0 -2.0 1.0 0.0 -2.0 1.0;
# 7) Pure CMY sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 8) Adjusted CMY sweep
pattern 1.0 1.0 -2.0 -2.0 -2.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 9) CMYK, transition band 10-30%
pattern 0.1 0.3 1.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 10) Adjusted CMYK, transition band 30-70%
pattern 0.3 0.7 -2.0 -2.0 -2.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 11) CMYK, transition band 10-99.9%
pattern 0.1 0.999 1.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 12) CMYK, transition band 30-99.9%
pattern 0.3 0.999 1.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 13) CMYK, transition band 50-99.9%
pattern 0.5 0.999 1.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 14) Adjusted CMYK, transition band 10-30%
pattern 0.1 0.3 -2.0 -2.0 -2.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 15) CMYK, transition band 30-70%
pattern 0.3 0.7 1.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 16) Adjusted CMYK, transition band 10-99.9%
pattern 0.1 0.999 -2.0 -2.0 -2.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 17) Adjusted CMYK, transition band 30-99.9%
pattern 0.3 0.999 -2.0 -2.0 -2.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 18) Adjusted CMYK, transition band 50-99.9%
pattern 0.5 0.999 -2.0 -2.0 -2.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0;
# 19) Y+M (R) sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0;
# 20) Y+M+.25C sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.25 1.0 0.0 0.0 1.0 0.0 0.75 1.0 0.0 0.75 1.0;
# 21) Y+M+.25C sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.25 1.0 0.0 0.0 1.0 0.0 0.75 1.0 0.0 0.75 1.0;
# 22) Y+M+.5C sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.5 1.0;
# 23) Y+M+.5C sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.5 1.0 0.0 0.5 1.0;
# 24) Y+M+.75C sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.75 1.0 0.0 0.0 1.0 0.0 0.25 1.0 0.0 0.25 1.0;
# 25) Y+M+.75C sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.75 1.0 0.0 0.0 1.0 0.0 0.25 1.0 0.0 0.25 1.0;
# 26) Y+M+.9C sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.9 1.0 0.0 0.0 1.0 0.0 0.1 1.0 0.0 0.1 1.0;
# 27) Y+M+.9C sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.9 1.0 0.0 0.0 1.0 0.0 0.1 1.0 0.0 0.1 1.0;
# 28) C+Y (G) sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0;
# 29) C+Y+.25M sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.25 1.0 0.0 0.75 1.0 0.0 0.0 1.0 0.0 0.75 1.0;
# 30) C+Y+.25M sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.25 1.0 0.0 0.75 1.0 0.0 0.0 1.0 0.0 0.75 1.0;
# 31) C+Y+.5M sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.5 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.5 1.0;
# 32) C+Y+.5M sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.5 1.0 0.0 0.5 1.0 0.0 0.0 1.0 0.0 0.5 1.0;
# 33) C+Y+.75M sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.75 1.0 0.0 0.25 1.0 0.0 0.0 1.0 0.0 0.25 1.0;
# 34) C+Y+.75M sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.75 1.0 0.0 0.25 1.0 0.0 0.0 1.0 0.0 0.25 1.0;
# 35) C+Y+.9M sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.9 1.0 0.0 0.1 1.0 0.0 0.0 1.0 0.0 0.1 1.0;
# 36) C+Y+.9M sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.9 1.0 0.0 0.1 1.0 0.0 0.0 1.0 0.0 0.1 1.0;
# 37) C+M (B) sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.0 1.0 0.0 1.0 1.0 0.0 1.0 1.0 0.0 0.0 1.0;
# 38) C+M+.25Y sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.25 1.0 0.0 0.75 1.0 0.0 0.75 1.0 0.0 0.0 1.0;
# 39) C+M+.25Y sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.25 1.0 0.0 0.75 1.0 0.0 0.75 1.0 0.0 0.0 1.0;
# 40) C+M+.5Y sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.5 1.0 0.0 0.5 1.0 0.0 0.5 1.0 0.0 0.0 1.0;
# 41) C+M+.5Y sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.5 1.0 0.0 0.5 1.0 0.0 0.5 1.0 0.0 0.0 1.0;
# 42) C+M+.75Y sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.75 1.0 0.0 0.25 1.0 0.0 0.25 1.0 0.0 0.0 1.0;
# 43) C+M+.75Y sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.75 1.0 0.0 0.25 1.0 0.0 0.25 1.0 0.0 0.0 1.0;
# 44) C+M+.9Y sweep
pattern 1.0 1.0 1.0 1.0 1.0 0.0 0.9 1.0 0.0 0.1 1.0 0.0 0.1 1.0 0.0 0.0 1.0;
# 45) C+M+.9Y sweep (using K)
pattern 0.0 0.0 1.0 1.0 1.0 0.0 0.9 1.0 0.0 0.1 1.0 0.0 0.1 1.0 0.0 0.0 1.0;