cups-genppdconfig.in [plain text]
#! @PERL@ -w
# $Id: cups-genppdconfig.in,v 1.1.1.1 2004/07/23 06:26:31 jlovell Exp $
# A user-friendly dialog-based wrapper for cups-genppd(8).
# Copyright (C) 2002 Roger Leigh <rleigh@debian.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
use strict;
use File::Basename;
use File::Find;
use File::Temp qw(tempfile unlink0);
use IO::Handle;
use Getopt::Std;
use POSIX;
use Locale::gettext;
sub init_data();
sub init_defaults();
sub main_menu();
sub display_help;
sub choose_printers;
sub choose_languages;
sub choose_location;
sub create_ppds;
sub create_dir($);
sub dialog_read($$);
sub dialog_read_list (\%\@$$);
sub perl_menu ($$$$@);
sub perl_menu_read_list (\%\@$$);
sub perl_menu_mult ($$@);
my $DIALOG = "@DIALOG@"; # version of dialog to call
my $use_dialog = 0; # whether to use dialog
my $BACKTITLE = "Gimp-Print CUPS PPD creation"; # dialog screen title
my %printers; # master list of printers
my %languages; # master list of languages
my @used_printers; # printer PPDs on system
my @used_languages; # languages used on system
my @chosen_printers = (); # chosen printers
my @chosen_languages = (); # chosen languages
my $version = "@GIMPPRINT_MAJOR_VERSION@.@GIMPPRINT_MINOR_VERSION@";
my $chosen_location = "@cups_conf_datadir@/model/gimp-print/$version";
# chosen PPD prefix
my $silent = 0; # no dialog
# Set chosen_location from command-line.
our $opt_d;
our $opt_u;
getopts('d:u');
if ($opt_d) {
$chosen_location = create_dir($opt_d);
}
# Initialise everything
init_data();
init_defaults();
# Run non-interactively if `-u' was specified.
if ( $opt_u ) {
$silent = 1;
create_ppds;
exit 0;
}
# Can we use dialog?
if (-x $DIALOG) {
$use_dialog = 1;
} else {
BEGIN { $Curses::OldCurses = 1; }
use Curses;
use perlmenu;
perl_menu_defaults();
}
while (my $option = main_menu()) { # Display main menu and run selection
if ($option eq "Help") {
display_help();
} elsif ($option eq "Printers") {
choose_printers();
} elsif ($option eq "Languages") {
choose_languages();
} elsif ($option eq "Directory") {
choose_location();
} elsif ($option eq "Create") {
create_ppds();
} elsif ($option eq "Exit") {
exit 0;
} else {
die "Invalid menu option: $option";
}
}
exit 0;
#
# init_data() - Populate master printer and language hashes.
#
sub init_data() {
my $model;
my $desc;
my $lang;
# Get printer drivers and descriptions, then store in a hash.
open GENPPD, "cups-genppd.$version -M -v |" or die "can't fork cups-genppd.$version: $!";
while (<GENPPD>) {
($model, $desc) = /([\w-]+)\W+(.*)/;
chomp ($model);
chomp ($desc);
$printers{$model} = $desc;
}
close GENPPD or die "can't close cups-genppd.$version pipe: $!";
# Get available languages, then store in hash.
open GENPPD, "cups-genppd.$version -L |" or die "can't fork cups-genppd.$version: $!";
while (<GENPPD>) {
$lang = $_;
chomp ($lang);
$languages{$lang} = "(No description)";
}
$languages{"en"} = "US English";
close GENPPD or die "can't close cups-genppd.$version pipe: $!";
# Set defaults
@chosen_languages = ("en");
}
#
# init_defaults() - Get defaults from PPD files and directories.
#
sub init_defaults() {
# Find all PPD files that we could regenerate
my %found_ppds;
find({wanted => \&find_printers}, $chosen_location);
foreach (@used_printers) {
my $tmp;
$tmp = basename($_);
chomp ($tmp);
$tmp =~ s/(^.*)\.ppd.*/$1/;
$found_ppds{$tmp} = "" if $printers{$tmp};
}
@chosen_printers = ();
foreach (sort keys %found_ppds) {
push @chosen_printers, $_;
}
# Find all language directories that could be used
my %found_langs;
find({wanted => \&find_languages}, $chosen_location);
foreach (@used_languages) {
my $tmp;
$tmp = basename($_);
chomp ($tmp);
$found_langs{$tmp} = "" if $languages{$tmp};
}
@chosen_languages = ();
foreach (sort keys %found_langs) {
push @chosen_languages, $_;
}
if (! @chosen_languages) {
push @chosen_languages, "en";
}
}
#
# find-*() - callbacks for File::Find::find().
#
sub find_printers {
my ($dev,$ino,$mode,$nlink,$uid,$gid);
(($dev,$ino,$mode,$nlink,$uid,$gid) = lstat($_)) &&
-f _ &&
/^.*\.ppd.*\z/s && push @used_printers, $_;
}
sub find_languages {
my ($dev,$ino,$mode,$nlink,$uid,$gid);
(($dev,$ino,$mode,$nlink,$uid,$gid) = lstat($_)) &&
-d _ && push @used_languages, $_;
}
# string
# main_menu() - Display main menu.
# Return string containing selection.
#
sub main_menu() {
my $option;
my @menu_options;
my $menu_desc = << "END";
Generate Gimp-Print PPD files for use with CUPS. This program is a user-friendly interface for cups-genppd(8).
Current PPD directory: $chosen_location
Hint: if the cursor keys cause problems, you may have more luck with +/- and TAB.
END
@menu_options = (
[ "Help", "Display help text" ],
[ "Directory", "Choose PPD location" ],
[ "Printers", "Choose printers" ],
[ "Languages", "Choose languages" ],
[ "Create", "Create PPDs" ],
[ "Exit", "Exit the program" ]
);
if ($use_dialog) {
my $dialog_options;
for my $i ( 0 .. $#menu_options) {
for my $j ( 0 .. $#{$menu_options[$i]}) {
$dialog_options .= "\"$menu_options[$i][$j]\" ";
}
}
while (defined($option = dialog_read("cups-genppdconfig", "--no-cancel --default-item Printers --menu \"$menu_desc\" 20 70 6 $dialog_options"))) {
chomp ($option);
return $option;
}
} else {
$option = perl_menu(1, "Main menu", "Choose an option.",
"Current PPD directory: $chosen_location",
@menu_options);
return $option;
}
}
#
# display_help() - Display help text.
#
sub display_help {
my $help_text = <<"END";
cups-genppdconfig is a program to generate PPD files which enable the
Gimp-Print printer drivers to be used with CUPS, the Common UNIX
Printing System. A PPD file is a PostScript Printer Description,
which describes the capabilities of a printer. For each printer model
that you wish to use, you will have to generate the corresponding PPD
file.
There are three steps to generating the PPDs:
[0. Directory]
The default base directory to create PPD files in is
@cups_conf_datadir@/model/gimp-print, and this is displayed on the
main menu. Choose the "Directory" option to change this, but in
almost every case the default should be used. Don\'t alter the default
unless you know what you are doing.
1. Printers
Choose the "Printers" menu option. The dialog box shows a complete
list of all the printers supported by Gimp-Print. Use the up and down
cursor keys to move between the printers and SPACE to select the
models you want. Next, press ENTER to confirm the selections.
If no printers are chosen, then a PPD file will be created for *every*
model.
2. Languages
PPD files can be produced in several languages. Choose the
"Languages" menu option and, as for the "Printers" menu, select the
languages that you wish to use and press ENTER to confirm the
selections.
Since a PPD file can only be translated into one language, selecting
multiple languages is posible, but of limited usefulness (for each
printer, a separate PPD file for each language will be produced).
3. Save the selections
Choose the "Save" menu option to generate the PPD files you requested.
The files will be created in the default CUPS data directory
\$cups_prefix/share/model/gimp-print. Translations will be saved in
subdirectories named according to the locale/language.
Note that unselecting already selected entries in the Printer and
Language Selection dialogs will *not* remove these from the
filesystem; it will simply not cause them to be generated when you
choose "Save". To remove a printer, delete the PPD file from each
language directory it appears in. To remove a language, delete the
directory named with the corresponding language code, and all its
contents.
Once you have finished, choose the "Exit" menu option, to leave the
program. Note that your selections will be lost, so make sure you
saved your selections first, if you wanted to keep them.
END
my($HELPFILE, $helpfilename) = tempfile("cups-genppdconfig-helpXXXXXX",
UNLINK => 1)
or die "can't open temporary help file";
print $HELPFILE "$help_text";
$HELPFILE->flush();
if ($use_dialog) {
dialog_read("Help", "--textbox $helpfilename 18 76");
} else {
&menu_init(0, "Help", 0);
open(TEMP,$helpfilename);
while (<TEMP>) {
s/^(\t+)/' ' x length($1)/e;
&expand($_) if /\t/;
&menu_item($_,"", -1);
}
close(TEMP);
&menu_display("Help viewer: (RET/u/t) exit (n/p) next/previous page (b) beginning (e) end");
}
unlink0($HELPFILE, $helpfilename) or die "Error unlinking help file $helpfilename safely: $!";
close($HELPFILE) or die "can't close help file $helpfilename: $!";
return;
}
#
# choose_printers() - Select printers from master list.
# Default none (so create all printers).
#
sub choose_printers {
my $title = "Printer selection";
my $options = "--checklist \"Choose the printer models you wish to use with CUPS.\" 18 54 11";
if ($use_dialog) {
dialog_read_list(%printers, @chosen_printers, $title, $options);
} else {
perl_menu_read_list(%printers, @chosen_printers, $title,
"Choose the printer models you wish to use with CUPS.");
}
}
#
# choose_languages() - Select languages from master list.
# Default is US English (en).
#
sub choose_languages {
my $title = "Language selection";
my $options = "--checklist \"Choose the languages you wish to use with CUPS.\" 18 54 11";
if ($use_dialog) {
dialog_read_list(%languages, @chosen_languages, $title, $options);
} else {
perl_menu_read_list(%languages, @chosen_languages, $title,
"Choose the languages you wish to use with CUPS.");
}
}
#
# choosen_location() - Select PPD prefix directory and create it if
# not present.
#
sub choose_location {
my $location;
if ($use_dialog) {
$location = dialog_read("Location selection",
"--inputbox \"Choose a directory to create the PPD files in.\" 8 61 $chosen_location");
} else {
$location = &menu_getstr(5,12,"Directory:", 1, $chosen_location);
}
if (!defined($location)) {
$location = "";
}
$chosen_location = create_dir($location); # make sure directory exists
init_defaults; # use new location to get default selections
}
#
# create_dir($dir) - Create named directory.
# $dir will have excess `/'s pruned.
#
sub create_dir ($) {
my $location = $_[0];
my $dir;
my $count = 0;
if ($location =~ m/^\//) {
$dir = "/";
}
foreach (split /\//, $location) {
if ($_ eq "") {
next;
}
if ($count == 1) {
$dir .= "/";
}
$count = 1;
$dir .= $_;
if (!-d $dir) # directory does not exist, so create it
{
mkdir $dir || die "can't create directory \`$dir\': $!";
}
}
return $dir;
}
#
# create_ppds() - Create PPD files.
#
sub create_ppds {
create_dir($chosen_location); # make the destination directory
my $total = scalar(@chosen_printers);
my $printers;
my $count;
my $language;
my $percent;
my $file;
if (!@chosen_printers) { # calculate total files for guage
$total = scalar(keys(%printers));
}
$total = $total * scalar(@chosen_languages);
if (@chosen_printers) { # construct printer list for dialog
foreach (@chosen_printers) {
$printers .= "$_ ";
}
} else {
$printers = "";
}
if (! $silent && $use_dialog) {
open DIALOG, "| $DIALOG --sleep 2 --backtitle \"$BACKTITLE\" --title \"Creating PPD files\" --guage \"Language: \nPPD files: \" 10 72 0"
or die "can't fork dialog: $!";
}
$count = 0;
foreach $language (@chosen_languages) { # loop through languages
open GENPPD,
"LANGUAGE=$language cups-genppd.$version -v -p $chosen_location/$language $printers 2>&1 |"
or die "can't fork cups-genppd: $!";
$file = "";
while ( defined($file = <GENPPD>)) { # dump genppd stats into guage
chomp($file);
$count++;
$percent = int (($count/$total)*100);
if ($percent > 100) {
$percent = 100;
}
if (! $silent && $use_dialog) {
print DIALOG "$percent\n";
print DIALOG "XXX\nLanguage: $language\nPPD files: $count/$total\n\n$file\nXXX\n";
DIALOG->flush();
} else {
print "$file\n";
STDOUT->flush();
}
}
close GENPPD or die "can't close cups-genppd pipe: $!";
}
if (! $silent && $use_dialog) {
print DIALOG "100\nXXX\nLanguage: \nPPD files: $total/$total\n\nCompleted\nXXX\n";
close DIALOG or die "can't close dialog pipe";
}
}
# scalar
# dialog($title, $command) - Create a dialog.
# Returns dialog results.
sub dialog_read ($$) {
my($title, $command) = @_;
my $result = ""; # must not be undefined, just empty
my $status;
my $line;
open DIALOG, "$DIALOG --backtitle \"$BACKTITLE\" --title \"$title\" $command 2>&1 |";
while (defined($line = <DIALOG>)) {
$result .= $line;
}
close DIALOG or ($! == 0) or die "can't close dialog pipe: $!";
if ($? >> 8)
{
return undef;
}
return $result;
}
#
# dialog_read_list(%masterlist
# @chosenlist
# $title
# $dialog) - Construct list dialog, entries from %masterlist,
# defaults from @chosenlist.
#
sub dialog_read_list (\%\@$$) {
my $masterlist = $_[0];
my $list = $_[1];
my $title = $_[2];
my $dialogoptions = $_[3];
my $tmplist;
my $dialoglist = "";
my $item;
my $selected;
# Make a list for use with dialog.
foreach $item (sort keys %$masterlist) {
$selected = "off";
foreach (@$list) {
if ($item eq $_) {
$selected = "on";
last;
}
}
$dialoglist .= "$item \"$masterlist->{$item}\" $selected ";
}
$tmplist = dialog_read("$title", "$dialogoptions $dialoglist");
if (defined($tmplist)) {
$tmplist =~ s/\"//g;
@$list=split(/ /, $tmplist);
}
}
# scalar
# perl_menu($title)
#
sub perl_menu ($$$$@) {
my ($top, $title, $question, $subtitle, @items) = @_;
my $selection;
&menu_init(1, "cups-genppdconfig", $top, $title, "$BACKTITLE\n-<$subtitle");
for my $i ( 0 .. $#items) {
&menu_item($items[$i][1], $items[$i][0]);
}
$selection = &menu_display($question);
return $selection;
}
# scalar
# perl_menu_mult($title, $question, @items)
#
sub perl_menu_mult ($$@) {
my ($title, $question, @items) = @_;
my $selection;
&menu_init(1, "cups-genppdconfig", 0, $title, $BACKTITLE);
for my $i ( 0 .. $#items) {
&menu_item($items[$i][1], $items[$i][0], $items[$i][2]);
}
perl_menu_sel_defaults();
$selection = &menu_display_mult($question);
perl_menu_defaults();
if ($selection eq "%UP%" or $selection eq "%NONE%") {
return undef;
}
return $selection;
}
#
# perl_menu_read_list(%masterlist
# @chosenlist
# $title
# $question
# - Construct list dialog, entries from %masterlist,
# defaults from @chosenlist.
#
sub perl_menu_read_list (\%\@$$) {
my $masterlist = $_[0];
my $list = $_[1];
my $title = $_[2];
my $question = $_[3];
my $tmplist;
my @menulist = ();
my $item;
my $selected;
# Make a list for use with perlmenu.
foreach $item (sort keys %$masterlist) {
$selected = 0;
foreach (@$list) {
if ($item eq $_) {
$selected = 1;
last;
}
}
my $formatstring = sprintf "%-14s - %s", $item, $masterlist->{$item};
push @menulist, [ $item, $formatstring, $selected ] ;
}
$tmplist = perl_menu_mult("$title", "RET=toggle selection (u/t) exit (n/p) next/previous page (b) beginning (e) end", @menulist);
if (defined($tmplist)) {
$tmplist =~ s/\"//g;
@$list=split(/,/, $tmplist);
}
}
#
# perl_menu_defaults - set menu defaults
#
sub perl_menu_defaults {
&menu_prefs(1, 0, 1, 0, "y", 0, 0);
}
#
# perl_menu_sel_defaults - set menu defaults for multiple selections
#
sub perl_menu_sel_defaults {
&menu_prefs(1, 0, 1, 0, "y", 1, 0);
}