# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AWK = @AWK@
BFD_HOST_64BIT_LONG = @BFD_HOST_64BIT_LONG@
BFD_HOST_64_BIT = @BFD_HOST_64_BIT@
BFD_HOST_64_BIT_DEFINED = @BFD_HOST_64_BIT_DEFINED@
BFD_HOST_LONG_LONG = @BFD_HOST_LONG_LONG@
BFD_HOST_U_64_BIT = @BFD_HOST_U_64_BIT@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CC_FOR_BUILD = @CC_FOR_BUILD@
COREFILE = @COREFILE@
COREFLAG = @COREFLAG@
CXX = @CXX@
CXXCPP = @CXXCPP@
DATADIRNAME = @DATADIRNAME@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
EGREP = @EGREP@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
F77 = @F77@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GT_NO = @GT_NO@
GT_YES = @GT_YES@
HDEFINES = @HDEFINES@
INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = @RANLIB@
RC = @RC@
STRIP = @STRIP@
TDEFINES = @TDEFINES@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WIN32LDFLAGS = @WIN32LDFLAGS@
WIN32LIBADD = @WIN32LIBADD@
all_backends = @all_backends@
am__include = @am__include@
am__quote = @am__quote@
bfd_backends = @bfd_backends@
bfd_default_target_size = @bfd_default_target_size@
bfd_file_ptr = @bfd_file_ptr@
bfd_libs = @bfd_libs@
bfd_machines = @bfd_machines@
bfd_ufile_ptr = @bfd_ufile_ptr@
bfd_version = @bfd_version@
bfd_version_string = @bfd_version_string@
bfdincludedir = @bfdincludedir@
bfdlibdir = @bfdlibdir@
install_sh = @install_sh@
l = @l@
tdefaults = @tdefaults@
wordsize = @wordsize@

AUTOMAKE_OPTIONS = cygnus

DOCFILES = aoutx.texi  archive.texi archures.texi \
	bfdt.texi  cache.texi coffcode.texi \
	core.texi elf.texi elfcode.texi  format.texi \
	libbfd.texi bfdwin.texi bfdio.texi \
	opncls.texi  reloc.texi  section.texi  \
	syms.texi  targets.texi init.texi hash.texi linker.texi \
	mmo.texi


PROTOS = archive.p archures.p bfd.p \
	 core.p format.p \
	bfdio.p bfdwin.p \
	libbfd.p opncls.p reloc.p \
	section.p syms.p targets.p  \
	format.p  core.p init.p


IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip coffcode.ip

# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
# you don't need these three:
SRCDOC = $(srcdir)/../aoutx.h  $(srcdir)/../archive.c \
	$(srcdir)/../archures.c $(srcdir)/../bfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../cache.c $(srcdir)/../coffcode.h \
	$(srcdir)/../corefile.c $(srcdir)/../elf.c \
	$(srcdir)/../elfcode.h  $(srcdir)/../format.c \
	$(srcdir)/../libbfd.c $(srcdir)/../opncls.c \
	$(srcdir)/../reloc.c  $(srcdir)/../section.c \
	$(srcdir)/../syms.c  $(srcdir)/../targets.c \
	$(srcdir)/../hash.c $(srcdir)/../linker.c \
	$(srcdir)/../mmo.c


SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \
	$(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \
	$(srcdir)/../format.c $(srcdir)/../libbfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../opncls.c $(srcdir)/../reloc.c \
	$(srcdir)/../section.c $(srcdir)/../syms.c \
	$(srcdir)/../targets.c $(srcdir)/../init.c \
	$(srcdir)/../cache.c


SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \
	$(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \
	$(srcdir)/../init.c


TEXIDIR = $(srcdir)/../../texinfo/fsf

info_TEXINFOS = bfd.texinfo

MKDOC = chew$(EXEEXT_FOR_BUILD)

LIBBFD_H_DEP = \
	$(srcdir)/../libbfd-in.h	\
	$(srcdir)/../init.c		\
	$(srcdir)/../libbfd.c		\
	$(srcdir)/../bfdio.c		\
	$(srcdir)/../bfdwin.c		\
	$(srcdir)/../cache.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../archures.c		\
	$(srcdir)/../elf.c		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(MKDOC)


LIBCOFF_H_DEP = \
	$(srcdir)/../libcoff-in.h	\
	$(srcdir)/../coffcode.h		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(MKDOC)


BFD_H_DEP = \
	$(srcdir)/../bfd-in.h 		\
	$(srcdir)/../init.c 		\
	$(srcdir)/../opncls.c 		\
	$(srcdir)/../libbfd.c 		\
	$(srcdir)/../bfdio.c		\
	$(srcdir)/../bfdwin.c		\
	$(srcdir)/../section.c 		\
	$(srcdir)/../cache.c 		\
	$(srcdir)/../archures.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../syms.c		\
	$(srcdir)/../bfd.c		\
	$(srcdir)/../archive.c		\
	$(srcdir)/../corefile.c		\
	$(srcdir)/../targets.c		\
	$(srcdir)/../format.c		\
	$(srcdir)/../linker.c		\
	$(srcdir)/../simple.c		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(srcdir)/../version.h		\
	$(MKDOC)


noinst_TEXINFOS = bfdint.texi

MOSTLYCLEANFILES = $(MKDOC) *.o

CLEANFILES = s-* *.p *.ip

DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log

MAINTAINERCLEANFILES = $(DOCFILES)
subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
depcomp =
am__depfiles_maybe =
DIST_SOURCES =
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
INFO_DEPS = bfd.info
DVIS = bfd.dvi
TEXINFOS = bfd.texinfo
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .info .ps .texinfo
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --cygnus  doc/Makefile
Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool

bfd.info: bfd.texinfo
bfd.dvi: bfd.texinfo

.texinfo.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
	  -I $(srcdir) $<

.texinfo.dvi:
	TEXINPUTS="$(top_srcdir)/../texinfo$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texinfo:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
	  -I $(srcdir) $<

MAKEINFO = `if test -f $(top_builddir)/../texinfo/makeinfo/makeinfo; then \
            echo $(top_builddir)/../texinfo/makeinfo/makeinfo; \
          else \
            echo makeinfo; \
          fi`

TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then \
             echo $(top_srcdir)/../texinfo/util/texi2dvi; \
           else \
             echo texi2dvi; \
           fi`
DVIPS = dvips
.dvi.ps:
	$(DVIPS) $< -o $@

uninstall-info-am:
	$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
	    install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (if cd $(DESTDIR)$(infodir); then \
	     echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
	     rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f bfd.aux bfd.cp bfd.cps bfd.dvi bfd.fn bfd.ky bfd.log bfd.pg bfd.ps \
	  bfd.tmp bfd.toc bfd.tp bfd.vr

maintainer-clean-aminfo:
	list='$(INFO_DEPS)'; for i in $$list; do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done

clean-info: mostlyclean-aminfo
tags: TAGS
TAGS:

check-am:
check: check-am
all-am: Makefile

installdirs:
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am: $(DVIS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am:

install-exec-am:

install-info:

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  for ifile in echo $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9]; do \
	    if test -f $$ifile; then \
	      relfile=`expr "$$ifile" : "$$d/\(.*\)"`; \
	      echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
	      $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool

uninstall-am:

.PHONY: all all-am check check-am clean clean-generic clean-info \
	clean-libtool dist-info distclean distclean-generic \
	distclean-libtool dvi dvi-am info info-am install install-am \
	install-data install-data-am install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
	mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \
	uninstall uninstall-am uninstall-info-am


$(MKDOC): chew.o
	$(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS)

chew.o: chew.c
	$(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c

protos: libbfd.h libcoff.h bfd.h

bfd.info bfd.dvi: $(DOCFILES) bfdsumm.texi bfd.texinfo

# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.

# We use s-XXX targets so that we can distribute the info files,
# and permit people to rebuild them, without requiring the makeinfo
# program.  If somebody tries to rebuild info, but none of the .texi
# files have changed, then this Makefile will build chew, and will
# build all of the stamp files, but will not actually have to rebuild
# bfd.info.

s-aoutx: $(MKDOC) $(srcdir)/../aoutx.h $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../aoutx.h >aoutx.tmp
	$(srcdir)/../../move-if-change aoutx.tmp aoutx.texi
	touch s-aoutx
aoutx.texi: s-aoutx

s-archive: $(MKDOC) $(srcdir)/../archive.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../archive.c >archive.tmp
	$(srcdir)/../../move-if-change archive.tmp archive.texi
	touch s-archive
archive.texi: s-archive

s-archures: $(MKDOC) $(srcdir)/../archures.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archures.c >archures.tmp
	$(srcdir)/../../move-if-change archures.tmp archures.texi
	touch s-archures
archures.texi: s-archures

# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
# bfd.texinfo on an 8.3 filesystem.
s-bfd: $(MKDOC) $(srcdir)/../bfd.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfd.c >bfd.tmp
	$(srcdir)/../../move-if-change bfd.tmp bfdt.texi
	touch s-bfd
bfdt.texi: s-bfd

s-cache: $(MKDOC) $(srcdir)/../cache.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../cache.c >cache.tmp
	$(srcdir)/../../move-if-change cache.tmp cache.texi
	touch s-cache
cache.texi: s-cache

s-coffcode: $(MKDOC) $(srcdir)/../coffcode.h $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../coffcode.h >coffcode.tmp
	$(srcdir)/../../move-if-change coffcode.tmp coffcode.texi
	touch s-coffcode
coffcode.texi: s-coffcode

s-core: $(MKDOC) $(srcdir)/../corefile.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../corefile.c >core.tmp
	$(srcdir)/../../move-if-change core.tmp core.texi
	touch s-core
core.texi: s-core

s-elf: $(MKDOC) $(srcdir)/../elf.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elf.c >elf.tmp
	$(srcdir)/../../move-if-change elf.tmp elf.texi
	touch s-elf
elf.texi: s-elf

s-elfcode: $(MKDOC) $(srcdir)/../elfcode.h $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elfcode.h >elfcode.tmp
	$(srcdir)/../../move-if-change elfcode.tmp elfcode.texi
	touch s-elfcode
elfcode.texi: s-elfcode

s-mmo: $(MKDOC) $(srcdir)/../mmo.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../mmo.c >mmo.tmp
	$(srcdir)/../../move-if-change mmo.tmp mmo.texi
	touch s-mmo
mmo.texi: s-mmo

s-format: $(MKDOC) $(srcdir)/../format.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../format.c >format.tmp
	$(srcdir)/../../move-if-change format.tmp format.texi
	touch s-format
format.texi: s-format

s-libbfd: $(MKDOC) $(srcdir)/../libbfd.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../libbfd.c >libbfd.tmp
	$(srcdir)/../../move-if-change libbfd.tmp libbfd.texi
	touch s-libbfd
libbfd.texi: s-libbfd

s-bfdio: $(MKDOC) $(srcdir)/../bfdio.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdio.c >bfdio.tmp
	$(srcdir)/../../move-if-change bfdio.tmp bfdio.texi
	touch s-bfdio
bfdio.texi: s-bfdio

s-bfdwin: $(MKDOC) $(srcdir)/../bfdwin.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdwin.c >bfdwin.tmp
	$(srcdir)/../../move-if-change bfdwin.tmp bfdwin.texi
	touch s-bfdwin
bfdwin.texi: s-bfdwin

s-opncls: $(MKDOC) $(srcdir)/../opncls.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str  <$(srcdir)/../opncls.c >opncls.tmp
	$(srcdir)/../../move-if-change opncls.tmp opncls.texi
	touch s-opncls
opncls.texi: s-opncls

s-reloc: $(MKDOC) $(srcdir)/../reloc.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../reloc.c >reloc.tmp
	$(srcdir)/../../move-if-change reloc.tmp reloc.texi
	touch s-reloc
reloc.texi: s-reloc

s-section: $(MKDOC) $(srcdir)/../section.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../section.c >section.tmp
	$(srcdir)/../../move-if-change section.tmp section.texi
	touch s-section
section.texi: s-section

s-syms: $(MKDOC) $(srcdir)/../syms.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../syms.c >syms.tmp
	$(srcdir)/../../move-if-change syms.tmp syms.texi
	touch s-syms
syms.texi: s-syms

s-targets: $(MKDOC) $(srcdir)/../targets.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../targets.c >targets.tmp
	$(srcdir)/../../move-if-change targets.tmp targets.texi
	touch s-targets
targets.texi: s-targets

s-init: $(MKDOC) $(srcdir)/../init.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../init.c >init.tmp
	$(srcdir)/../../move-if-change init.tmp init.texi
	touch s-init
init.texi: s-init

s-hash: $(MKDOC) $(srcdir)/../hash.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../hash.c >hash.tmp
	$(srcdir)/../../move-if-change hash.tmp hash.texi
	touch s-hash
hash.texi: s-hash

s-linker: $(MKDOC) $(srcdir)/../linker.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../linker.c >linker.tmp
	$(srcdir)/../../move-if-change linker.tmp linker.texi
	touch s-linker
linker.texi: s-linker

libbfd.h: $(LIBBFD_H_DEP)
	echo "$(LIBBFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(LIBBFD_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done
	echo "#endif /* __LIBBFD_H__ */" >> $@

libcoff.h: $(LIBCOFF_H_DEP)
	echo "$(LIBCOFF_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(LIBCOFF_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done

bfd.h: $(BFD_H_DEP)
	echo "$(BFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(BFD_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done
	echo "#ifdef __cplusplus" >> $@
	echo "}" >> $@
	echo "#endif" >> $@
	echo "#endif" >> $@

# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install: install-info
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: