2000-10-02 James Ingham * mi-support.exp: Add ".*" between the running message and the prompt, since some systems may give extra output when the inferior starts up. * mi-console.exp: Add a native branch to the "200-break-insert main" test. * mi-console.exp: Don't test the thread number explicitly, since the system may create helper threads for applications. * mi-disassemble.exp: Ditto. * mi-eval.exp: Ditto. * mi-read-memory.exp: Ditto. * mi-regs.exp: Ditto. * mi-return.exp: Ditto. * mi-simplerun.exp: Ditto. * mi-stack.exp: Ditto. * mi-stepi.exp: Ditto. * mi-until.exp: Ditto. * mi-var-block.exp: Ditto. * mi-var-child.exp: Ditto. * mi-var-cmd.exp: Ditto. * mi-var-display.exp: Ditto. Tue Apr 18 15:36:07 2000 Andrew Cagney * Makefile.in (clean mostlyclean): Do not delete $(MISCELLANEOUS). Tue Mar 14 15:54:57 2000 Andrew Cagney * basics.c: Add EMACS local variable pointing change-log at this file. * Makefile.in: Ditto 2000-03-13 James Ingham * mi-var-block.exp: The error report from varobj_create changed since I am now trapping parse_exp_1 errors. Change the tests to match the new error message. * mi-var-child.exp: Ditto. * mi-var-cmd.exp: Ditto. 2000-03-06 Elena Zannoni * mi-disassemble.exp: Don't assume numbers for the offset values. They can be different depending on the architecture. * mi-watch.exp (test_watchpoint_triggering): In same cases the type can be 'hw wathcpoint' not just 'watchpoint'. Adjust for that. * basics.c (callee4): Make the function return something, otherwise the return value is undefined. 2000-03-06 Elena Zannoni * mi-basics.exp: Comment out test for a still unimplemented operation. * mi-disassemble.exp: Rewrite most of the tests to conform to new disassemble interface. Sat Mar 4 13:55:08 2000 Andrew Cagney From Fri 3 Mar 2000 Peter Schauer: * mi-support.exp (mi_gdb_start): When GDB doesn't recongize -i=mi option, assume no MI support present. 2000-02-01 Elena Zannoni * mi-support.exp (mi_gdb_start): Update to recognize start up message with 'UI_OUT' instead of 'HEADLESS'. 2000-01-27 Elena Zannoni * mi-regs.exp (test_running_the_program): Add global var 'hex'. * mi-stack.exp, mi-stepi.exp, mi-until.exp, mi-watch.exp, mi-var-display.exp, mi-var-cmd.exp, mi-var-child.exp, mi-var-block.exp: Update all stopped messages. 2000-01-17 Elena Zannoni * mi-console.exp, mi-disassemble.exp, mi-eval.exp, mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp: Update stopped messages, update copyright. * mi-disassemble.exp: Update error messages output. * mi-support.exp (proc mi_step): Make gdb do a 'step' command, not a 'next'. Update stopped message. (proc mi_next): Update stop message. (proc mi_run_to_main): Update stopped message. Update copyright. 2000-01-11 Elena Zannoni * mi-simplerun.exp: Remove stack frames tests from here, to: * mi-stack.exp: New file, tests for stack commands. * mi-support.exp (mi_run_to_main, mi_next, mi_step) : Update to include thread-id in stopped message. * mi-regs.exp: Update break-insert output. * (mi-console.exp, mi-disassemble.exp, mi-eval.exp, mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp, mi-stepi.exp, mi-until.exp, mi-var-block.exp, mi-var-child.exp, mi-var-cmd.exp, mi-var-display.exp, mi-watch.exp): Update stopped message to include thread-id. Wed Dec 29 22:06:05 1999 Andrew Cagney * mi-watch.exp, mi-var-display.exp, mi-var-cmd.exp, mi-var-child.exp, mi-var-block.exp, mi-until.exp, mi-stepi.exp, mi-simplerun.exp, mi-return.exp, mi-support.exp, mi-eval.exp, mi-console.exp, mi-disassemble.exp, mi-break.exp: Update to reflect extended output from -break-insert command. * mi-break.exp (test_rbreak_creation_and_listing): XFAIL regexp tests. -r flag broken by above. Sun Dec 19 19:28:13 1999 Andrew Cagney * cpp_variable.cc, cpp_variable.h, c_variable.c: Delete. Fri Dec 17 20:59:55 1999 Andrew Cagney * mi-read-memory.exp: Test of ``-o '' now works. 1999-12-16 Elena Zannoni * mi-var-cmd.exp: Fix 2 tests outputs. * mi-var-child.exp: Add many more tests. * mi-var-display.exp: Add many more tests. * var-cmd.c: Change type of incr_a parameter to char. 1999-12-15 Elena Zannoni * mi-var-block.exp: Set up xfails fro known problems. * mi-var-display.exp: Set up printing of values of 'e' and 'anone' as xfails. * mi-var-child.exp: Fix typos. 1999-12-15 Andrew Cagney * mi-var-child.exp: Space was missing before ``[10]''. Wed Dec 15 19:23:38 1999 Andrew Cagney * mi-read-memory.exp: Add test for ``-o ''. Update checks and match next-row et.al. 1999-12-14 Elena Zannoni * mi-var-display.exp : New file. Tests for format and type, with unions, structs and enums. * mi-var-cmd.exp: Add some var-assign tests. 1999-12-14 Elena Zannoni * mi-var-cmd.exp, mi-var-block.exp, mi-var-child.exp: New files some tests for -var* commands. * var-cmd.c: New source file for var-* commands tests. * gdb.mi/Makefile.in (PROGS): Add var-cmd. Mon Dec 13 18:06:09 1999 Andrew Cagney * mi-break.exp: Fix quoting. Changed "srcfile.c":6 to "\"srcfile.c\":6". * mi-simplerun.exp: Fix quoting. Sat Dec 11 21:33:37 1999 Andrew Cagney * mi-simplerun.exp (exec-finish): Fix return value was zero, should have been three. * mi-disassemble.exp: Reduce number of wild card matches in * patterns. Remove all numeric constants. 1999-12-09 Elena Zannoni * mi-eval.exp: New file. Some initial tests for -data-evaluate-expression. 1999-12-09 Fernando Nasser * c_variable.c, cpp_variable.cc, cpp_variable.h: New files. Used for testing "var" operations. * Makefile.in: Add reference to the above files. 1999-12-08 Elena Zannoni * mi-regs.exp: Fix test for format 'N' for data-list-register-values. 1999-12-07 Elena Zannoni * mi-disassemble.exp: Update expected output. Break test of disassembly in mixed mode into 2 functions. * mi-regs.exp: Initial register tests. Works only on sparc right now. 1999-12-02 Elena Zannoni * mi-stepi.exp: New file. Tests exec-step-instruction and exec-next-instruction. * mi-until.exp: New file. Tests exec-until. * until.c: New file. * mi-return.exp: New file. Tests exec-return. Thu Dec 2 09:38:23 1999 Andrew Cagney * mi-hack-cli.exp: New test. Check the hacked up access to the CLI. Wed Dec 1 16:47:40 1999 Andrew Cagney * mi-basics.exp: Delete calls to mi_delete_breakpoints, mi_gdb_reinitialize_dir and mi_gdb_load. This test is checking that these can work. * mi-support.exp (mi_step, mi_next, mi_run_to_main): New procedures. * mi-read-memory.exp, mi-read-memory.c: New files. Test data-read-memory command. Tue Nov 30 23:54:16 1999 Andrew Cagney * mi-support.exp: Don't start SID until after GDB has been started and verified. Tue Nov 30 22:21:33 1999 Andrew Cagney * mi-support.exp (mi_uncatched_gdb_exit): When SID, call sid_exit. (mi_gdb_start): When SID, call sid_start. (mi_gdb_start): Add MIFLAGS to spawn-GDB command. Check for HEADLESS gdb. Return non-zero when GDB fails to start. (mi_gdb_load): When SID or SIM, download program. (mi_run_cmd): Don't do download here. Assume target supports the 00-exec-run command. (skip_mi_tests, setup_gdbmi, unset_gdbmi): Delete. Merged into mi_gdb_start. * mi-basics.exp, mi-break.exp, mi-console.exp, mi-disassemble.exp, mi-simplerun.exp, mi-watch.exp: Update. Check status from mi_gdb_start indicating that GDB started correctly. Tue Nov 30 15:22:08 1999 Andrew Cagney * mi-support.exp (setup_gdbmi, unset_gdbmi): New procedures. Setup/unset dejagnu for mi tests. * mi-basics.exp, mi-console.exp, mi-simplerun.exp, mi-break.exp, mi-disassemble.exp, mi-watch.exp: Update. 1999-11-29 Elena Zannoni * mi-simplerun.exp (test_running_the_program): Remove XFAIL. The output is fixed now. (test_program_termination): Update output pattern. Tue Nov 30 00:19:10 1999 Andrew Cagney * mi-console.c, mi-console.exp: New files. Test console output. Mon Nov 29 17:59:13 1999 Andrew Cagney * mi-support.exp (mi_run_command): Check for exec-run command failure due to MI not having an active target. (mi_run_command): Check for and handle a builtin simulator target. (mi_run_command): Don't check/handle for ``The program has been started already'', not a valid MI response. * mi-simplerun.exp (test_running_the_program): Update all patterns to match async output. (test_running_the_program): Mark ``step to callee4'' as XFAIL. MI output contains {,reason="end-stepping-range"}+. * mi-simplerun.exp: Limit the timeout for ``step to callee4'' to 30 seconds. Mon Nov 29 17:30:00 1999 Andrew Cagney * mi-support.exp (skip_mi_tests): Print UNTESTED when MI interface isn't available. Start/stop instead of assuming GDB is running. (MIFLAGS): Define. * mi-simplerun.exp, mi-disassemble.exp, mi-break.exp, mi-basics.exp, mi-watch.exp: Update. 1999-11-26 Elena Zannoni * mi-simplerun.exp: Move break-insert {-t, -r} from here. * mi-break.exp: To here. New file. * mi-watch.exp: New file. Tests for watchpoints. Wed Nov 24 17:42:07 1999 Andrew Cagney * gdb.mi/ChangeLog-mi: MI entries moved to here. Wed Nov 24 17:31:04 1999 Andrew Cagney * gdb.mi/mi-basics.exp, gdb.mi/mi-disassemble.exp, gdb.mi/mi-simplerun.exp: Print warning message when test isn't run. 1999-11-23 Elena Zannoni * gdb.mi/mi-simplerun.exp: Update output of break-list to account for "times" field. 1999-11-05 Elena Zannoni * gdb.mi/mi-simplerun.exp: Add tests for temporary breakpoints and bp based on regular expressions. * gdb.mi/mi-disassemble.exp: Fix typo. 1999-11-04 Elena Zannoni * gdb.mi/mi-disassemble.exp: Update output of execution commands to reflect new 'reason' field. * gdb.mi/mi-simplerun.exp: Ditto. 1999-10-25 Elena Zannoni * gdb.mi/mi-simplerun.exp: Add more stack-list-frames tests. * gdb.mi/mi-disassemble.exp: Update 'run to main' output. * gdb.mi/mi-simplerun.exp: Update execution commands output. Update backtrace output. 1999-10-18 Elena Zannoni * gdb.mi/mi-disassemble.exp: Add new tests for the new disassembly command parameter, number of lines. Mon Oct 11 13:57:21 1999 Andrew Cagney * lib/mi-support.exp: Break complicated gdb_expect containing exp_continue into a while within an expect. Don't attempt a start more than three times. Check return value from gdb_load. 1999-10-06 Elena Zannoni * gdb.mi/mi-disassemble.exp: New file. Wed Oct 6 12:05:58 1999 Andrew Cagney * lib/mi-support.exp (mi_run_cmd): Give up after two restart attempts. 1999-09290 Fernando Nasser * gdb.mi/mi-basics.exp: Update to current syntax and output formats. * gdb.mi/mi-simplerun.exp: Ditto. * lib/mi-support.exp (mi_delete_breakpoints): Ditto. 1999-06-30 Fernando Nasser * gdb.mi/basics.c (main): Fix return code. Add a print "Hello, World". * gdb.mi/mi-basics.exp: Fix message texts and numbering. * gdb.mi/mi-simplerun.exp: Ditto. Also, add new tests and improve some patterns. 1999-06-30 Fernando Nasser * lib/mi-support.exp (mi_gdb_reinitialize_dir): Remove query as an acceptable response to the environment-dir command. 1999-06-30 Fernando Nasser * lib/mi-support.exp (mi_delete_breakpoints): Remove references to gdb-cli. (mi_run_cmd): Ditto. 1999-06-25 Fernando Nasser * lib/mi-support.exp (skip_mi_tests): Use gdb-version to check for headless output format. 1999-06-24 Fernando Nasser * gdb.mi/mi-simplerun.exp (test_controlled_execution): Add global spec for hex. 1999-06-24 Fernando Nasser * lib/mi-support.exp (mi_run_cmd): Fix pattern and add a timeout clause. 1999-06-24 Fernando Nasser * lib/mi-support.exp: Use mi_gdb_prompt instead of a modified gdb_prompt. Remove uneeded loading of libgloss. (mi_gdb_exit): Remove prompt argument. (mi_uncatched_gdb_exit): Ditto. (mi_run_cmd): New proc. MI version of gdb_run. (skip_mi_tests): New proc. Check if gdb is capable of producing headless formatted output. * gdb.mi/mi-basics.exp: Use mi_gdb_prompt instead of a modified gdb_prompt. Eliminate parameter to mi_gdb_exit (as a result of the above). Test for skip_mi_tests before running. Note: The above changes are interelated (need each other). * gdb.mi/mi-simplerun.exp: Same changes as for mi-basics.exe above. (test_breakpoint_creation_and_listing): Remove insertion of breakpoint at callee1 (and renumber tokens). Add tests for break-list, break-disable and break-info. (test_running_the_program): Use mi_run_cmd so it can run on remote targets. (test_controlled_execution): Fix broken test. (test_program_termination): Test implemented. * gdb.mi/basic.c (main): Small change to allow for testing of both exec-next and exec-step operations. 1999-06-22 Fernando Nasser * lib/mi-support.exp (mi_gdb_test): New proc. MI version of gdb_test. * gdb.mi/mi-basics.exp: Use the above instead of gdb_test. * gdb.mi/mi-simplerun.exp: Ditto. 1999-06-22 Fernando Nasser * gdb.mi/mi-simplerun.exp: New file. Tests simple debugging tasks. * gdb.mi/mi-basics.exp: Remove tests moved to above new file. * lib/mi-support.exp: New file. Support procedures for mi tests. 1999-06-08 Fernando Nasser * gdb.mi/mi-basics.exp: Skip all tests if the MI interpreter is not active. 1999-06-03 Fernando Nasser * gdb.mi: New directory. * configure.in: Configure it. * configure: Regenerate. * gdb.mi/{Makefile.in,configure.in,configure}: New files. * gdb.mi/{mi-basics.exp,basics.c,testcmds}: New files. Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: