2005-08-14 Mark Kettenis <kettenis@gnu.org> * solib-som.c (som_current_sos): Cast to 'gdb_byte *' where appropriate. * inf-ptrace.c (inf_ptrace_him) [PT_GET_PROCESS_STATE]: Move code... (inf_ptrace_post_startup_inferior): ...here. New function. (inf_ptrace_attach) [PT_GET_PROCESS_STATE]: Move code... (inf_ptrace_post_attach): ...here. (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Set to_post_startup_inferior and to_post_attch. * sparc-tdep.c (sparc_breakpoint_from_pc): Constify break_insn. * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Check for "__sighndlr". 2005-08-13 Mark Kettenis <kettenis@gnu.org> * i386-linux-nat.c (fetch_register, store_register) (supply_gregset, fill_gregset): Remove redundant casts. 2005-08-12 Kris Warkentin <kewarken@qnx.com> * i386-nto-tdep.c (i386nto_init_abi): Don't set gdbarch skip trampoline code hook. * nto-procfs.c (procfs_post_attach): Call solib_create_inferior_hook instead of SOLIB_CREATE_INFERIOR_HOOK. (procfs_create_inferior): Ditto. * config/tm-nto.h: Don't define SKIP_TRAMPOLINE_CODE. 2005-08-11 Andreas Schwab <schwab@suse.de> PR exp/1978 * valarith.c (value_binop): Fix result type for the shift operators. 2005-08-09 Mark Kettenis <kettenis@gnu.org> * sparc64obsd-tdep.c: Tweak comments. (sparc64obsd_sigreturn_offset): Add offset for new OpenBSD 3.8 signal trampoline. 2005-08-09 Andrew Cagney <cagney@gnu.org> * linux-nat.h (linux_proc_xfer_memory): Change type of "myaddr" a "gdb_byte" pointer. * linux-nat.c (linux_proc_xfer_memory): Update. (get_signo): Cast signo to a "gdb_byte" pointer. * i386-linux-nat.c (child_resume): Make "buf" a gdb_byte, delete redundant casts. (child_resume): Cast eflags to a "gdb_byte" pointer. 2005-08-08 Mark Kettenis <kettenis@gnu.org> * tramp-frame.h (struct tramp_frame): Allow for 16 instructions instead of 8. * m68kbsd-tdep.c: Include "frame.h", "trad-frame.h" and "tramp-frame.h". (m68kobsd_sigtramp_cache_init): New function. (m68kbsd_aout_init_abi): Prepend m68kobsd_sigtramp unwinder. 2005-08-02 Fred Fish <fnf@specifix.com> * defs.h (parse_frame_specification): Remove prototype. * stack.c (parse_frame_specification): Add prototype and make function static. (frame_info): Move common code outside if..then..else. 2005-08-01 Daniel Jacobowitz <dan@codesourcery.com> * value.c (value_contents_writeable): Use value_contents_raw. 2005-08-01 Daniel Jacobowitz <dan@codesourcery.com> Suggested by Shaun Jackman <sjackman@gmail.com>: * defs.h (print_transfer_performance): Update prototype. * m32r-rom.c (m32r_load, m32r_upload_command): Use gettimeofday for print_transfer_performance. * remote-m32r-sdi.c (m32r_load): Likewise. * symfile.c (generic_load): Likewise. (report_transfer_performance): Create a dummy struct timeval. (print_transfer_performance): Use a more accurate measure of performance. 2005-08-01 Fred Fish <fnf@specifix.com> * stack.c (parse_frame_specification_1): Remove use of obsolete SETUP_ARBITRARY_FRAME macro. 2005-08-01 Daniel Jacobowitz <dan@codesourcery.com> * dwarf2-frame.c (read_signed_leb128): Handle values that do not fit in 32 bits. * dwarf2read.c (read_signed_leb128): Likewise. 2005-07-31 Daniel Jacobowitz <dan@codesourcery.com> From Josef Ezra <jezra@emc.com>: * tracepoint.c (stringify_collection_list): Correct pointer arithmetic. 2005-07-31 Daniel Jacobowitz <dan@codesourcery.com> Suggested by Vladimir Prus <ghost@cs.msu.su>: * infrun.c (handle_inferior_event): Check for line information in undebuggable functions. 2005-07-31 Kaveh R. Ghazi <ghazi@caip.rutgers.edu> * cli-out.c (cli_field_fmt, cli_message, out_field_fmt): Add ATTR_FORMAT or ATTRIBUTE_FPTR_PRINTF. * complaints.c (vcomplaint): Likewise. * defs.h (xvasprintf, xstrvprintf, verror, vfatal) (internal_verror, internal_vwarning, vwarning) (deprecated_query_hook, deprecated_warning_hook) (deprecated_readline_begin_hook): Likewise. * disasm.c (fprintf_disasm): Likewise. * exceptions.c (throw_it): Likewise. * exceptions.h (throw_verror, throw_vfatal): Likewise. * mi/mi-interp.c (mi_interp_query_hook): Likewise. * mi/mi-out.c (mi_field_fmt, mi_message): Likewise. * tui/tui-hooks.c (tui_query_hook): Likewise. * tui/tui-out.c (tui_field_fmt, tui_message, out_field_fmt): Likewise. * ui-out.c (default_field_fmt, default_message, uo_field_fmt) (uo_message): Likewise. * ui-out.h (ui_out_field_fmt, ui_out_message, field_fmt_ftype) (message_ftype): Likewise. * utils.c (vfprintf_maybe_filtered, internal_vproblem) (defaulted_query, printchar): Likewise. 2005-07-26 Mark Kettenis <kettenis@gnu.org> * i386obsd-tdep.c (i386obsd_sigreturn_offset): New variable. (i386obsd_sigtramp_p): Deal with an arbitrary number of possible offsets. (i386obsd_aout_supply_regset): Avoid bogus cast. 2005-07-25 Mark Kettenis <kettenis@gnu.org> * inf-ptrace.c [PT_GET_PROCESS_STATE] (inf_ptrace_follow_fork): New function. (inf_ptrace_him, inf_ptrace_attach) [PT_GET_PROCESS_STATE]: Set PTRACE_FORK event flag. (inf_ptrace_wait) [PT_GET_PROCESS_STATE]: Handle PTRACE_FORK event. (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Set to_follow_fork. 2005-07-25 Mark Kettenis <kettenis@gnu.org> * gdb_ptrace.h (PT_TRACE_ME): Define to zero if not already defined. * inf-ptrace.c: Tweak comments. (inf_ptrace_me): Use PT_TRACE_ME instead of hardcoded zero. (inf_ptrace_mourn_inferior): Call waitpid. (inf_ptrace_attach): Use pid_t, Remove unnecessary cast. (inf_ptrace_detach): Use pid_t. Use ptid_get_pid instead of PIDGET. (inf_ptrace_kill): Rename from inf_ptrace_kill_inferior. Use pid_t. Use ptid_get_pid instead of PIDGET. (inf_ptrace_kill): Call waitpid instead of wait. (inf_ptrace_resume): Use pid_t. Use ptid_get_pid instead of PIDGET. (inf_ptrace_wait): Use waitpid instead wait. Use pid_t. Don't call target_has_exited or target_thread_alive. Properly ignore terminated detached child processes. (inf_ptrace_has_exited): Remove function. (inf_ptrace_xfer_partial): Use pid_t. Use ptid_get_pid instead of PIDGET. Use gdb_byte instead of `unsigned char'. (inf_ptrace_thread_alive): Use ptid_get_pid instead of PIDGET. (inf_ptrace_pid_to_str): Remove function. (inf_ptrace_target): Use inf_ptrace_kill instead of inf_ptrace_kill_inferior. Use normal_pid_to_str instead of inf_ptrace_pid_to_str. Don't set to_has_exited. (inf_ptrace_fetch_register, inf_ptrace_store_register): Reformat long lines. 2005-07-25 Mark Kettenis <kettenis@gnu.org> * inf-ptrace.c: Reorder functions. (inf_ptrace_open, inf_ptrace_reported_exec_events_per_call) (inf_ptrace_can_run, inf_ptrace_post_attach): Removed. (inf_ptrace_target): Don't set to_open, to_reported_exec_events_per_call, to_can_run, to_post_attach, to_stratum, to_has_all_memory, to_has_memory, to_has_stack, to_has_registers, to_has_execution, to_magic. Reorder remaining initializations. 2005-07-25 Mark Mitchell <mark@codesourcery.com> * configure.ac: On MinGW, do not require a termcap library, and use win32-termcap.c. * configure: Regenerated. * win32-termcap.c: New file. 2005-07-24 Mark Mitchell <mark@codesourcery.com> * ser-tcp.c (close): Define as a function-like macro on MinGW. 2005-07-21 Eric Christopher <echristo@apple.com> * MAINTAINERS (Misc): Update affiliation. 2005-07-21 Mark Kettenis <kettenis@gnu.org> * inf-ttrace.c (inf_ttrace_wait): Properly report TTEVT_EXEC events as TARGET_WAITKIND_EXECD. (inf_ttrace_detach): Reorder local variables. 2005-07-20 Mark Kettenis <kettenis@gnu.org> * inf-ttrace.c (inf_ttrace_vfork_ppid): New variable. (inf_ttrace_follow_fork): New function. (inf_ttrace_him, inf_ttrace_attach): Ask for TTEVT_FORK and TTEVT_VFORK events. Replace TTEO_NOSTRCHLD option with TTEO_PROC_INHERIT. (inf_ttrace_create_inferior, inf_ttrace_attach): Add checks for inf_ttrace_vfork_ppid. (inf_ttrace_kill_inferior, inf_ttrace_detach): Detach from waiting parent if appropriate. (inf_ttrace_wait): Handle TTEVT_FORK and TTEVT_VFORK. (inf_ttrace_target): Set to_follow_fork. 2005-07-20 Wu Zhou <woodzltc@cn.ibm.com> * remote.c (remote_pid_to_str): Use xsnprintf instead of snprintf. 2005-07-18 Mark Kettenis <kettenis@gnu.org> * target.c (normal_pid_to_str): Use xsnprintf instead of snprintf. * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise. * inf-ttrace.c (inf_ttrace_pid_to_str): Likewise. * hppa-tdep.h (hppa_frame_prev_register_helper): Change types of last argument to `gdb_byte *'. * hppa-tdep.c (hppa32_convert_from_func_ptr_addr): Rewrite. (hppa_frame_prev_register_helper): Change types of last argument to `gdb_byte *'. * hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_prev_register): Change types of last argument to `gdb_byte *'. 2005-07-18 Mark Kettenis <kettenis@gnu.org> Jason Molenda <jmolenda@apple.com> * i386-tdep.c (i386_match_insn): Match complete instruction pattern. 2005-07-18 Mark Kettenis <kettenis@gnu.org> * i386-tdep.c (i386_reg_struct_return_p): Handle structures with a single 'long double' member correctly. (i386_return_value): Tweak comment. 2005-07-16 Nick Roberts <nickrob@snap.net.nz> * mi/gdb-mi.el: Update for changes in Emacs 22.0.50. Bring more features over from gdb-ui.el. Use "-var-update --all-values" for faster re-display of watch expressions. 2005-07-15 Mark Kettenis <kettenis@gnu.org> Marcel Moolenaar <marcel@xcllnt.net> * sparc64fbsd-nat.c: Include "regcache.h", <sys/types.h>, <machine/pcb.h> and "bsd-kvm.h". (sparc64fbsd_kvm_supply_pcb): New function. (_initialize_sparc64fbsd_nat): Enable libkvm interface. * config/sparc/fbsd.mh (NATDEPFILES): Add bsd-kvm.o. (LOADLIBES): New variable. * Makefile.in (sparc64fbsd-nat.o): Update dependencies. 2005-07-15 Nick Roberts <nickrob@snap.net.nz> Daniel Jacobowitz <dan@codesourcery.com> * mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values): New declarations. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Use string constants instead of literals for MI command options. * mi/mi-cmd-var.c (mi_no_values, mi_simple_values, mi_all_values): New variables. (mi_parse_values_option, mi_print_value_p): New functions. (mi_cmd_var_list_children): Use mi_parse_values_option and mi_print_value_p. (mi_cmd_var_update): Support a PRINT_VALUES option. Update calls to varobj_update_one. (varobj_update_one): Take a print_values argument. Call mi_print_value_p. * varobj.c (varobj_get_gdb_type): New function. * varobj.h (varobj_get_gdb_type): New prototype. 2005-07-13 Daniel Jacobowitz <dan@codesourcery.com> * ppc-linux-tdep.c (ppc_linux_init_abi): Set 64-bit link map offsets. 2005-07-12 Mark Kettenis <kettenis@gnu.org> * dwarf2expr.h: Tweak comment. (struct dwarf_expr_context): Use `gdb_byte *' in read_mem and get_frame_base function pointers. (read_uleb128, read_sleb128): Change return type and types of first two arguments to `gdb_byte *'. (dwarf2_read_address): Change types of first two arguments to `gdb_byte *'. * dwarf2expr.c: Tweak comment. (dwarf_expr_eval): Change type of second argument to `gdb_byte *'. (read_uleb128, read_sleb128): Change return type and types of first two arguments to `gdb_byte *'. (dwarf2_read_address): Change types of first two arguments to `gdb_byte *'. (execute_stack_op): Change types of last two arguments to `gdb_byte *'. Use `gdb_byte *' for byte buffers. * dwarf2loc.h: Tweak comment. (struct dwarf2_locexpr_baton, struct dwarf2_loclist_baton): Use `gdb_byte *' for byte buffers. * dwarf2loc.c (find_location_expression): Change return type to `gdb_byte *'. Use `gdb_byte *' for byte buffers. Change length to `unsigned int'. (dwarf_expr_read_reg): Use `gdb_byte *' for byte buffer. Remove bogus cast. (dwarf_expr_read_mem): Change type of second argument to `gdb_byte *'. (dwarf_expr_frame_base): Change type of second argument to `gdb_byte **'. (dwarf2_evaluate_loc_desc): Change type of third argument to `gdb_byte *'. (needs_frame_read_mem): Change type of second argument to `gdb_byte *'. (needs_frame_frame_base): Change type of second argument `gdb_byte **'. Use gdb_byte for lit0. (dwarf2_tracepoint_var_ref): Change type of fourth argument to `gdb_byte *'. Use `gdb_byte *' for byte buffer. (loclist_read_variable, loclist_tracepoint_var_ref): Use `gdb_byte *' for byte buffer. * dwarf2-frame.c (struct dwarf2_cie, struct dwarf2_fde) (struct dwarf2_frame_state): Use gdb_byte instead of `unsigned char'. (read_reg): Use `gdb_byte *' for byte buffers. Remove redundant cast. (read_mem): Change second argument to `gdb_byte *'. (no_get_frame_base): Change second argument to `gdb_byte **'. (execute_stack_op): Change first argument to `gdb_byte *'. (execute_cfa_program): Change first two arguments to `gdb_byte *'. Use gdb_byte instead of `unsigned int'. Use temprorary variable to store result of read_uleb128. (struct comp_unit): Use `gdb_byte *' for byte buffers. (read_1_byte, read_4_bytes, read_8_bytes): Change last argument to `gdb_byte *'. (read_unsigned_leb128, read_signed_leb128): Change second argument to `gdb_byte *'. Use gdb_byte instead of `unsigned char'. (read_initial_length): Change second argument to `gdb_byte *'. Remove redundant casts. (read_encoded_value): Use gdb_byte instead of `unsigned char'. Remove bogus casts. (decode_frame_entry_1): Change return type and second argument to `gdb_byte *'. Use `gdb_byte *' for byte buffers. Use gdb_byte instead of `unsigned char'. (decode_frame_entry): Change return type and second argument to `gdb_byte *'. Use `gdb_byte *' for byte buffers. (dwarf2_build_frame_info): Use `gdb_byte *' for byte buffers. 2005-07-12 Mark Kettenis <kettenis@gnu.org> * objc-lang.c (print_object_command): Use gdb_byte for c. * arch-utils.c (legacy_extract_return_value): Use 'gdb_byte *' for registers. 2005-07-11 Mark Kettenis <kettenis@gnu.org> * bsd-kvm.c: Include <paths.h>. (bsd_kvm_corefile): New variable. (core_kd, bsd_kvm_paddr, bsd_kvm_supply_pcb, bsd_kvm_ops): Make static. (bsd_kvm_open): Set bsd_kvm_corefile. (bsd_kvm_files_info): New function. (bsd_kvm_add_target): Set to_files_info. 2005-07-07 Andreas Schwab <schwab@suse.de> * observer.sh: Use different temporary file name depending on mode of operation to avoid clash during parallel build. 2005-07-06 Bob Rossi <bob@brasko.net> * fork-child.c (fork-inferior): Use accessor function for inferior_io_terminal. * infcmd.c (inferior_io_terminal): Make static. (set_inferior_io_terminal): New function. (get_inferior_io_terminal): Ditto. (tty_command): Use accessor function. (_initialize_infcmd): Add inferior_tty setshow variable. (_initialize_infcmd): Remove tty command. (_initialize_infcmd): Add a tty command that is an alias. * inferior.h (set_inferior_io_terminal): New prototype. (get_inferior_io_terminal): Ditto. (new_tty_prefork): Add const qualifier to parameter. * inflow.c (inferior_thisrun_terminal): Add const qualifier. (new_tty_prefork): Add const qualifier to parameter. * nto-procfs (procfs_create_inferior): Use accessor function. (procfs_create_inferior): Add const qualifier to locals. * win32-nat.c (child_create_inferior): Ditto. * mi/mi-cmd-env.c (mi_cmd_inferior_tty_set): New function. (mi_cmd_inferior_tty_set): Ditto. * mi/mi-cmds.c (mi_cmds): Add inferior-tty-set and inferior-tty-show * mi/mi-cmds.h (mi_cmd_inferior_tty_set): Add prototype. (mi_cmd_inferior_tty_show): Ditto. 2005-07-06 Wu Zhou <woodzltc@cn.ibm.com> * tui/tui-win.c (parse_scrolling_args): Fix SEGV error with invalid scroll command. 2005-07-06 Wu Zhou <woodzltc@cn.ibm.com> * f-exp.y (yyparse): Add code to support exponentiation expression. (yylex): Add code to scan exponentiation operator. * eval.c (evaluate_subexp_standard): Add support for BINOP_EXP. * valarith.c (value_binop): Reset errno to 0 before calling pow to do exponentiation operation. 2005-07-04 Mark Kettenis <kettenis@gnu.org> * i386nbsd-nat.c (i386nbsd_supply_pcb): Cast to 'gdb_byte *' in read_memory call. * bsd-uthread.c (bsd_uthread_wait): Use gdb_byte for byte buffer. * bsd-kvm.c (bsd_kvm_open): Properly cast sentinel in concat call. * coffread.c (patch_type, process_coff_symbol): Likewise. * corelow.c (core_open): Likewise. * dwarf2read.c (dwarf_decode_lines, dwarf2_start_subfile): * language.c (set_lang_str, set_type_str, set_range_str) (set_case_str): Likewise. * source.c (add_path, openp): Likewise. * stabsread.c: Likewise. * top.c (init_history): Likewise. * utils.c (xfullpath): Likewise. * value.c (lookup_internalvar): Likewise. * cli/cli-cmds.c (cd_command): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. * i387-tdep.c (print_i387_value, print_i387_ext, i387_tag): Change type of first argument to `const gdb_byte *'. (i387_print_float_info, i387_register_to_value) (i387_value_to_register, i387_supply_fsave, i387_collect_fsave) (i387_supply_fxsave, i387_collect_fxsave): Use gdb_byte for byte buffers. 2005-07-04 Ben Elliston <bje@gnu.org> * Makefile.in (RUNTEST): Set to runtest. 2005-07-03 Richard Henderson <rth@redhat.com> * amd64-tdep.c (amd64_sse_type): New. (amd64_register_info): Use it for xmm registers. Constify. (amd64_register_type): Initialize amd64_sse_type as needed. 2005-07-03 Steve Ellcey <sje@cup.hp.com> * configure.ac: Add arguments to AC_DEFINE calls. * acconfig.h: Remove file. * acinclude.m4 (AC_GNU_SOURCE): Remove definition. * configure: Regenerate. * config.in: Regenerate. 2005-07-01 Mark Kettenis <kettenis@gnu.org> * mips-tdep.c (mips_insn16_frame_prev_register) (mips_insn32_frame_prev_register, mips_stub_frame_prev_register): Change type of last argument to `gdb_byte *'. 2005-07-01 Steve Ellcey <sje@cup.hp.com> * MAINTAINERS (Write After Approval): Add myself. 2005-07-01 Mark Kettenis <kettenis@gnu.org> * solib-svr4.c: Include "solib.h". * Makefile.in (solib-svr4.o): Update dependencies. 2005-06-28 Mark Kettenis <kettenis@gnu.org> * eval.c (evaluate_struct_tuple): Use strcmp instead of DEPRECATED_STREQ. 2005-06-27 Michael Snyder <msnyder@redhat.com> * config/mn10300/linux.mt: New file. * configure.tgt: Add rule for am33 / mn10300-linux. * mn10300-tdep.c, mn10300-tdep.h: Bump copyright year. 2005-06-27 Wu Zhou <woodzltc@cn.ibm.com> * gdbtypes.c (get_discrete_bounds): Fix a comment typo. 2005-06-25 Mark Kettenis <kettenis@gnu.org> * sol-thread.c (sol_thread_xfer_memory): Change type of second argument to `gdb_byte *'. (sol_thread_xfer_partial): Change type of readbuf and writebuf arguments to `gdb_byte *'. * mips-tdep.c (mips_xfer_register, mips_o32_return_value) (mips_integer_to_address): Use gdb_byte instead of bfd_byte. 2005-06-24 Mark Kettenis <kettenis@gnu.org> * ppcobsd-nat.c: Include "gdbcore.h", <sys/signal.h>, <machine/frame.h>, <machine/pcb.h> and "bsd-kvm.h". (ppcobsd_supply_pcb): New function. (_initialize_ppcobsd_nat): Enable libkvm interface. * Makefile.in (ppcobsd-nat.o): Update dependencies. * config/powerpc/obsd.mh (NATDEPFILES): Add bsd-kvm.o. (LOADLIBES): New variable. 2005-06-24 Corinna Vinschen <vinschen@redhat.com> * i386-tdep.c (struct i386_frame_cache): Define sp_offset as LONGEST. 2005-06-23 Andreas Schwab <schwab@suse.de> * gdb_ptrace.h: Fix typos when checking for PT_ATTACH. Reported by Chad Harrington <harrington.chad@gmail.com>. 2005-06-22 Mark Kettenis <kettenis@gnu.org> * remote.c (extended_remote_restart): Pass buffer in call to xsnprintf instead of a pointer to the buffer. 2005-06-21 Andrew Cagney <cagney@gnu.org> * MAINTAINERS: List GDB's Steering Committee as responsible for GDB's maintenance. 2005-06-21 Mark Kettenis <kettenis@gnu.org> * inf-ttrace.c (inf_ttrace_xfer_partial): Change type of readbuf and writebuf arguments to `gdb_byte *'. 2005-06-21 Wu Zhou <woodzltc@cn.ibm.com> * MAINTAINERS (Write After Approval): Add myself. 2005-06-20 Mark Kettenis <kettenis@gnu.org> * hppabsd-tdep.c: Include "symtab.h", "objfiles.h", "target.h", "value.h" and "elf/common.h". (hppabsd_supply_gregset): Use `gdb_byte *' for byte buffer. (hppabsd_find_global_pointer): New function. (hppabsd_init_abi): Set TDEP->find_global_pointer to hppabsd_find_global_pointer. * Makefile.in (hppabsd-tdep.o): Update dependencies. 2005-06-12 Mark Kettenis <kettenis@gnu.org> * hppa-tdep.c (hppa_pointer_to_address_hack): Remove function. (unwind_command): Use %lx to print pointer. 2005-06-19 Mark Kettenis <kettenis@gnu.org> * remote-sim.c (gdbsim_xfer_inferior_memory): Remove prototype. Change type of second argument to`gdb_byte *'. 2005-06-19 Nick Roberts <nickrob@snap.net.nz> * mi/mi-cmd-stack.c (mi_cmd_stack_info_frame): New function. * mi/mi-cmds.c (mi_cmds): Replace entry for -stack-info-frame. Make it use mi_cmd_stack_info_frame * mi/mi-cmds.h (mi_cmd_stack_info_frame): New declaration. 2005-06-18 Mark Kettenis <kettenis@gnu.org> * hppa-tdep.c (hppa_fallback_frame_cache): Don't error out if we can't find the bounds of the current function. Wrap some long lines in the process. * regcache.c (regcache_raw_supply, regcache_raw_collect): Change type of last argument back to `void *'. * regcache.h (regcache_raw_supply, regcache_raw_collect): Likewise. 2005-06-18 Nick Roberts <nickrob@snap.net.nz> * mi/mi-cmds.c (mi_cmds): Remove entry for -stack-info-frame. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames) (mi_cmd_stack_info_depth): Don't test for stack. (mi_cmd_stack_select_frame): Make the argument mandatory. Don't test for stack. 2005-06-17 Wu Zhou <woodzltc@cn.ibm.com> * remote.c (set_thread, remote_thread_alive): Replace sprintf call with xsnprintf. (remote_threads_extra_info, extended_remote_restart) (remote_check_symbols, store_register_using_P) (compare_sections_command): Ditto. 2005-06-16 David Ung <davidu@mips.com> * MAINTAINERS (Write After Approval): Add self. 2005-06-15 Mark Kettenis <kettenis@gnu.org> * hppa-hpux-nat.c (hppa_hpux_fetch_register) (hppa_hpux_store_register): Add casts in extract_unsigned_integer and store_usigned_integer calls. 2005-06-14 Nick Roberts <nickrob@snap.net.nz> * mi/mi-main.c (mi_cmd_data_list_register_values): Remove test for registers now that mi_execute_command rewinds after an error. 2005-06-13 Mark Kettenis <kettenis@gnu.org> * configure.ac: Use AC_CHECK_TYPES to check for uintptr_t. * configure, config.in: Regenerate. * ser-tcp.c: Tweak comment. [!HAVE_SOCKLEN_T]: Typedef socklen_t. * configure.ac: Add check for socklen_t. * configure, config.in: Regenerate. 2005-06-13 H.J. Lu <hongjiu.lu@intel.com> * config/i386/linux64.mt (TDEPFILES): Add symfile-mem.o. 2005-06-13 Richard Sandiford <richard@codesourcery.com> * MAINTAINERS: Update my email address. 2005-06-13 Mark Mitchell <mark@codesourcery.com> * corelow.c (core_open): Use bfd_fopen, not bfd_fdopenr. * exec.c (exec_file_attach): Likewise. * solib-frv.c (enable_break2): Likewise. * solib-svr4.c (enable_break): Likewise. * solib.c (solib_map_sections): Likewise. * symfile.c (symfile_bfd_open): Likewise. 2005-06-13 Daniel Jacobowitz <dan@codesourcery.com> * Makefile.in (symfile.o): Add $(exec_h). * exec.h (exec_set_section_address): Add prototype. * exec.c (exec_set_section_address): New function. * symfile.c: Include "exec.h". (struct place_section_arg, place_section): New. (default_symfile_offsets): Call place_section for each section of a relocatable file. 2005-06-13 Joel Brobecker <brobecker@adacore.com> * hppa-tdep.c (hppa_pc_requires_run_before_use): Really test all bits of top byte in address. 2005-06-13 Wu Zhou <woodzltc@cn.ibm.com> * eval.c (evaluate_subexp_standard): Add code to check the target type of a TYPE_CODE_PTR value when we encounter a f77 undetermined arglist. If it is array, string or function, work on the target value instead. 2005-06-12 Daniel Jacobowitz <dan@codesourcery.com> Nick Roberts <nickrob@snap.net.nz> * mi/mi-main.c (register_changed_p, get_register): Use get_selected_frame. (mi_execute_command): Call mi_out_rewind after an error. 2005-06-12 Mark Kettenis <kettenis@gnu.org> * hppa-tdep.c (hppa_frame_prev_register) (hppa_fallback_frame_prev_register) (hppa_stub_frame_prev_register): Change type of last argument to `gdb_byte *'. (hppa_fetch_pointer_argument): Tweak comment. Use get_frame_register_unsigned instead of get_frame_register. (hppa32_return_value, hppa64_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. Remove unecessary casts and local variables. (hppa_pseudo_register_read): Change type of last argument to `gdb_byte *'. * m68k-tdep.c (m68k_frame_prev_register): Change type of last argument to `gdb_byte *'. * arm-tdep.c (set_disassembly_style, _initialize_arm_tdep): Consitify regnames. * alpha-tdep.c (alpha_sigtramp_frame_prev_register) (alpha_heuristic_frame_prev_register): Change type of last argument to `gdb_byte *'. (alpha_register_to_value, alpha_value_to_register) (alpha_extract_return_value, alpha_store_return_value): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_frame_prev_register): Likewise. * arm-tdep.c (arm_prologue_prev_register) (arm_sigtramp_prev_register): Change type of last argument to `gdb_byte *'. * m88k-tdep.c (m88k_frame_prev_register): Change type of last argument to `gdb_byte *'. * vax-tdep.c (vax_frame_prev_register): Change type of last argument to `gdb_byte *'. * sparc-tdep.c (sparc32_frame_prev_register): Change type of last argument to `gdb_byte *'. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_prev_register): Likewise. * sparcobsd-tdep.c (sparc32obsd_frame_prev_register): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_prev_register): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_prev_register): Likewise. * sparc64obsd-tdep.c (sparc64obsd_frame_prev_register): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Likewise. * amd64-tdep.c (amd64_frame_prev_register) (amd64_sigtramp_frame_prev_register): Change type of last argument to `gdb_byte *'. 2005-06-11 Mark Kettenis <kettenis@gnu.org> * i386-tdep.c (i386_register_type): Return builtin_type_void_func_ptr for %eip and builtin_type_void_data_ptr for %ebp and %esp. 2005-06-10 Ben Elliston <bje@au.ibm.com> * valprint.c (print_floating): Fix comment typo. 2005-06-09 Jeff Johnston <jjohnstn@redhat.com> * ia64-tdep.c (ia64_pseudo_register_read): Use gdb_byte and protect libunwind references with HAVE_LIBUNWIND_IA64_H flag. (ia64_pseudo_register_write): Use gdb_byte to remove warning. (ia64_register_to_value, ia64_value_to_register): Ditto. (ia64_frame_prev_register): Ditto. (ia64_libunwind_frame_prev_register): Ditto. (ia64_sigtramp_frame_prev_register): Ditto. (ia64_libunwind_sigtramp_frame_prev_register): Ditto. (ia64_store_return_value): Ditto. 2005-06-08 Jeff Johnston <jjohnstn@redhat.com> David Mosberger <davidm@hpl.hp.com> * ia64-tdep.c (KERNEL_START): New macro. (ia64_pseudo_register_read): Fix code to use libunwind to properly get the rse registers. (ia64_frame_this_id): Mark outermost frame with null frame id. (ia64_sigtramp_frame_prev_register): Fix up debug output. (ia64_access_rse_reg): New accessor function. (ia64_access_mem): Add special logic for accessing the kernel's unwind table. (getunwind_table): Fix for corefiles. (get_kernel_table): Fix to handle vDSO. (ia64_libunwind_frame_this_id): Check for null frame id and don't unwind past pc value of 0. Fix debugging output. (ia64_libunwind_sigtramp_frame_this_id): New function. (ia64_libunwind_sigtramp_frame_prev_register): Ditto. (ia64_libunwind_sigtramp_frame_sniffer): Ditto. (ia64_libunwind_sigtramp_frame_unwind): New unwinder. (ia64_unw_rse_accessors): New libunwind accessors. (ia64_libunwind_descr): Add ia64_unw_rse_accessors. (ia64_gdbarch_init)[HAVE_LIBUNWIND_IA64_H]: Use ia64_libunwind_sigtramp_frame_sniffer instead of ia64_sigtramp_frame_sniffer. * libunwind-frame.c (libunwind_frame_set_descr): Add special register accessors. (libunwind_frame_cache): Add special logic to check for 0 pc value. Check for a signal trampoline frame. (libunwind_frame_this_id): Check if libunwind_frame_cache returns NULL. (libunwind_frame_prev_register): Check for NULL cache. (libunwind_frame_base_address): Ditto. (libunwind_sigtramp_frame_sniffer): New function. (libunwind_get_reg_special): Ditto. (libunwind_load): Add unw_is_signal_frame support. * libunwind-frame.h (struct libunwind_descr): Add special_accessors field. (libunwind_sigtramp_frame_sniffer): New prototype. (libunwind_get_reg_special): Ditto. 2005-06-08 Wu Zhou <woodzltc@cn.ibm.com> * expression.h (enum exp_opcode): Fix a comment typo. 2005-06-06 Manoj Iyer <manjo@austin.ibm.com> * solib-svr4.c (struct lm_info): Change type of 'lm' to gdb_byte. (elf_locate_base): Converted types of buf, bufend, pbuf, to gdb_byte. (first_link_map_member): Converted type of r_map_buf to gdb_byte. (open_symbol_file_object): Converted type of l_name_buf to gdb_byte. (svr4_fetch_objfile_link_map): Converted type of l_name_buf to gdb_byte. 2005-06-04 Richard Sandiford <rsandifo@nildram.co.uk> * MAINTAINERS: Update my email address. 2005-06-03 Joel Brobecker <brobecker@adacore.com> * symmisc.c (dump_symtab_1): Renamed from dump_symtab. (dump_symtab): New function. 2005-04-02 Joel Brobecker <brobecker@adacore.com> * exceptions.h: Include ui-out.h. (ui_out): Remove declaration. * Makefile.in (exceptions_h): Add dependency on ui-out.h. 2005-05-30 Andrew Cagney <cagney@gnu.org> * MAINTAINERS (Can Commit Without Approval): New section, previously burried under "Target Instruction Set Architectures". Note that cagney "can commit" changes to powerpc-linux. * MAINTAINERS: Drop architecture and target vectors. 2005-05-29 Eli Zaretskii <eliz@gnu.org> * config/djgpp/fnchange.lst: Add mappings for linux-ppc-low.c and linux-ppc64-low.c. 2005-05-28 Bob Rossi <bob@brasko.net> * Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS): Add mi-common. (gdb/mi/ headers): Add mi_common_h. (breakpoint.o, infrun.o): Add dependencies mi_common_h. * breakpoint.c (include): Add include 'mi/mi-common.h'. (print_it_typical): Use async_reason_lookup. (watchpoint_check): Ditto. * infrun.c (include): Add include 'mi/mi-common.h'. (print_stop_reason): Use async_reason_lookup. * mi/mi-common.h: New file. * mi/mi-common.c: Ditto. 2005-05-29 Joel Brobecker <brobecker@adacore.com> * alpha-tdep.c (alpha_next_pc): Use correct register number for floating-point branch instructions. 2005-05-28 Daniel Jacobowitz <dan@codesourcery.com> Jonathan Larmour <jifl@eCosCentric.com> PR backtrace/1760 * frame.c (backtrace_limit): Change type to int. (get_prev_frame): Update backtrace limit support. (_initialize_frame): Use add_setshow_integer_cmd for backtrace_limit. 2005-05-28 Daniel Jacobowitz <dan@codesourcery.com> * configure.tgt (powerpc64-*-linux*): Enable gdbserver. * regformats/reg-ppc64.dat: New file. 2005-05-28 Daniel Jacobowitz <dan@codesourcery.com> From Wu Zhou <woodzltc@cn.ibm.com>: * remote.c (struct gdb_ext_thread_info): Fix a comment typo. (remote_unpack_thread_info_response): Likewise. 2005-05-28 Daniel Jacobowitz <dan@codesourcery.com> * cli/cli-setshow.c (do_setshow_command): Partially revert previous change. Cast to "char **" for var_string. 2005-05-28 Daniel Jacobowitz <dan@codesourcery.com> * cp-name-parser.y (parse_escape): Revert previous change. Return the input character by default. 2005-05-28 Daniel Jacobowitz <dan@codesourcery.com> * dwarf2-frame.c (dwarf2_frame_prev_register): Use gdb_byte. * i386-linux-nat.c (fetch_register, store_register, supply_gregset) (fill_gregset): Likewise. * i386-tdep.c (i386_frame_prev_register) (i386_sigtramp_frame_prev_register): Likewise. * linux-nat.c (linux_nat_xfer_memory, linux_nat_make_corefile_notes): Likewise. * linux-thread-db.c (thread_db_xfer_memory): Likewise. * remote.c (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise. * target.c (debug_to_insert_hw_breakpoint) (debug_to_remove_hw_breakpoint, update_current_target): Likewise. 2005-05-28 Hans-Peter Nilsson <hp@axis.com> * MAINTAINERS: Change cris-elf state to non-broken. * cp-name-parser.y (parse_escape): Initialize target_char to zero. 2005-05-27 Orjan Friberg <orjanf@axis.com> * cris-tdep.c (crisv32_scan_prologue): Add. (cris_frame_unwind_cache, cris_skip_prologue): Call crisv32_scan_prologue when debugging CRISv32. 2005-05-27 Orjan Friberg <orjanf@axis.com> * cris-tdep.c (cris_sigtramp_start, cris_rt_sigtramp_start) (cris_frame_prev_register, cris_sigtramp_frame_prev_register) (cris_return_value): Use gdb_byte for byte buffers. (struct cris_frame_unwind, struct cris_frame_base): Fix formatting. 2005-05-26 Chris Demetriou <cgd@netbsd.org> * MAINTAINERS (Write After Approval): Remove myself. 2005-05-27 Andrew Cagney <cagney@gnu.org> * jv-lang.c (get_java_utf8_name): Add cast. (evaluate_subexp_java): Use gdb_byte for buffers. * jv-valprint.c (java_value_print, java_value_print): Use gdb_byte for buffers. * scm-lang.c (scm_get_field, scm_unpack) (scm_evaluate_string): Use gdb_byte for buffers. (scm_lookup_name): Add cast. * scm-valprint.c (scm_scmval_print, scm_scmval_print): Use gdb_byte for buffers. * tui/tui.h (tui_get_command_dimension): Make parameters unsigned. * tui/tui.c (tui_get_command_dimension): Make parameters unsigned. * value.h (check_field): Change "name" to a string. * valops.c (check_field): Change "name" to a string. * scm-lang.h (scm_parse): Use gdb_byte for buffers. * source.c (get_current_source_symtab_and_line) (set_current_source_symtab_and_line): Initialize all fields of sal structures. * cli/cli-cmds.c (list_command): Use gdb_byte for buffers. 2005-05-26 Andrew Cagney <cagney@gnu.org> * command.h (add_setshow_integer_cmd): Make VAR an integer. * cli/cli-decode.c (add_setshow_integer_cmd): Update to match. * valops.c (value_string): Add a cast. * eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers. * breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for byte buffers. * target.h (struct target_ops): For to_insert_hw_breakpoint and to_remove_hw_breakpoint use gdb_byte for byte buffer parameters. * breakpoint.h (struct bp_location): Make shadow_contents a gdb_byte buffer. * cli/cli-setshow.c (do_setshow_command): Fix cast. * cli/cli-dump.c (restore_section_callback) (restore_binary_file): Use gdb_byte for byte buffers. * proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts. (ps_xfer_memory): Use gdb_byte for byte buffers. * tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char for string buffers. * ser-tcp.c (net_open): Make len a socklen_t. 2005-05-24 Andrew Cagney <cagney@gnu.org> * rs6000-tdep.c (ppc_supply_reg, ppc_collect_reg): Use gdb_byte for byte buffers. (rs6000_fetch_pointer_argument): Use get_frame_register_unsigned. (rs6000_software_single_step, sstep_breaks, skip_prologue) (rs6000_push_dummy_call, rs6000_push_dummy_call) (rs6000_push_dummy_call, rs6000_push_dummy_call) (rs6000_register_to_value, e500_pseudo_register_read) (rs6000_store_return_value, e500_pseudo_register_write) (rs6000_frame_prev_register, rs6000_extract_return_value): Ditto. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call) (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value) (do_ppc_sysv_return_value, ppc_sysv_abi_return_value) (ppc_sysv_abi_broken_return_value) (ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_push_dummy_call) (ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value) (ppc64_sysv_abi_return_value, ppc64_sysv_abi_return_value): Ditto. * ppc-linux-tdep.c (ppc_linux_in_sigtramp) (ppc_linux_at_sigtramp_return_path) (ppc_linux_skip_trampoline_code) (ppc_linux_memory_remove_breakpoint, ppc_linux_return_value): * rs6000-tdep.c (rs6000_value_to_register) (rs6000_register_to_value): Ditto. * ppc-tdep.h (ppc_sysv_abi_return_value) (ppc64_sysv_abi_return_value, ppc_sysv_abi_broken_return_value) (ppc_linux_memory_remove_breakpoint): Ditto. 2005-05-24 Ulrich Weigand <uweigand@de.ibm.com> * s390-tdep.c (s390_frame_prev_register): Change type of last argument to 'gdb_byte *'. (s390_stub_frame_prev_register): Likewise. (s390_sigtramp_frame_prev_register): Likewise. 2005-05-24 Kris Warkentin <kewarken@qnx.com> * config/i386/nto.mt: Remove remote-nto.o. 2005-05-24 Orjan Friberg <orjanf@axis.com> * config/djgpp/fnchange.lst: Add mappings for gdbserver/linux-cris-low.c and gdbserver/linux-crisv32-low.c. 2005-05-23 Michael Snyder <msnyder@redhat.com> From Nora Pan <qpan@mvista.com> * linux-nat.c (read_mapping): Don't stumble over entries in mapping that have name but zero inode. 2005-05-23 Andrew Cagney <cagney@gnu.org> * target.h (child_xfer_memory): Use gdb_byte for byte buffer parameters. * inftarg.c (child_xfer_partial): Update. * wince.c (child_xfer_memory): Update. * win32-nat.c (child_xfer_memory): Update. * rs6000-nat.c (child_xfer_memory): Update. * infptrace.c (child_xfer_memory): Update. * dcache.c (struct dcache_block): Use gdb_byte for the byte buffers. (dcache_read_line, dcache_xfer_memory, dcache_poke_byte) (dcache_peek_byte, dcache_write_line): Ditto. * auxv.h (target_auxv_read, procfs_xfer_auxv) (target_auxv_parse): Use gdb_byte for byte buffer parameters. * auxv.c (target_auxv_read, procfs_xfer_auxv, target_auxv_parse) (target_auxv_search, fprint_target_auxv): Update. 2005-05-23 Orjan Friberg <orjanf@axis.com> * cris-tdep.c: Tweak values for cris-mode. 2004-05-23 Joel Brobecker <brobecker@adacore.com> * mdebugread.c (record_minimal_symbol): New procedure. (parse_partial_symbols): Use record_minimal_symbol to record the new minimal symbols instead of prim_record_minimal_symbol and prim_record_minimal_symbol_and_info. 2005-05-22 Mark Kettenis <kettenis@gnu.org> * NEWS: Mention OpenBSD/arm as a new native configuration. * armnbsd-nat.c: Include "gdb_string.h" and "inf_ptrace.h". Reorder includes. Don't require FETCH_INFERIOR_REGISTERS to be defined. (armnbsd_fetch_registers): Rename from armnbsd_fetch_registers. Make static. (armnbsd_store_registers): Rename from armnbsd_store_registers. Make static. (_initialize_arm_netbsd_nat): Construct and add target vector. * Makefile.in (armnbsd-nat.o): Update dependencies. * config/arm/nbsdaout.mh (NATDEPFILES): Remove infptrace.o and intarg.o, add inf-ptrace.o. (NAT_FILE): Set to solib.h. * config/arm/nbsdelf.mh (NATDEPFILES): Remove infptrace.o and inftarg.o, add inf-ptrace.o. (NAT_FILE): Remove. * arm-tdep.c (arm_extract_return_value, arm_store_return_value): Change type of last argument to `gdb_byte *'. * configure.host: Add arm*-*-openbsd*. * configure.tgt: Add arm*-*-openbsd*. 2005-05-22 Andrew Cagney <cagney@gnu.org> * frame.h (frame_register_unwind, frame_unwind_register) (get_frame_register, frame_register, put_frame_register) (get_frame_memory, safe_frame_unwind_memory) (frame_register_read): Use gdb_byte for byte buffer parameters. * trad-frame.h (trad_frame_get_register) (frame_get_prev_register): Ditto. * frame-unwind.h (frame_prev_register_ftype): Ditto. * frame.c (frame_pop, frame_register, frame_unwind_register) (get_frame_register, frame_unwind_register_signed) (frame_unwind_register_unsigned, frame_unwind_unsigned_register) (frame_register_read, get_frame_memory): Update. * trad-frame.c (trad_frame_get_prev_register): Update. (trad_frame_get_register): Update. * gdbcore.h (deprecated_read_memory_nobpt, read_memory): Ditto. * breakpoint.c (deprecated_read_memory_nobpt): Update. * corefile.c (read_memory): Update. * tramp-frame.c (tramp_frame_prev_register): Update. * valops.c (value_assign): Update. * sentinel-frame.c (sentinel_frame_prev_register): Update. * std-regs.c (value_of_builtin_frame_fp_reg) (value_of_builtin_frame_pc_reg): Update. * infcmd.c (default_print_registers_info): Update * dummy-frame.c (dummy_frame_prev_register): Update. * findvar.c (value_of_register, value_from_register): Update. * tui/tui-regs.c (tui_register_format, tui_get_register): Update. * mi/mi-main.c (register_changed_p, get_register): Update. 2005-05-20 Eli Zaretskii <eliz@gnu.org> * configure.ac: Add snprintf and vsnprintf to AC_CHECK_DECLS. Fix bad description of _MSE_INT_H that caused each word in config.in to be enclosed in []. * configure, config.in: Regenerate. 2005-05-20 Joel Brobecker <brobecker@adacore.com> * alpha-tdep.c (fp_register_zero_p): New function. (fp_register_sign_bit): New function. (alpha_next_pc): Add support for floating-point control instructions. 2005-05-19 Andrew Cagney <cagney@gnu.org> * defs.h (extract_signed_integer, extract_unsigned_integer) (extract_long_unsigned_integer, extract_typed_address) (store_signed_integer, store_unsigned_integer) (store_typed_address): Use gdb_byte for byte buffer parameters. (push_bytes, push_word): Delete declaration. * valops.c (push_bytes, push_word): Delete function. * findvar.c (extract_signed_integer, extract_unsigned_integer) (extract_typed_address, store_signed_integer) (store_unsigned_integer): Update. * regcache.h (regcache_raw_read, regcache_raw_write) (regcache_raw_read_part, regcache_raw_write_part) (regcache_cooked_read_part, regcache_cooked_write_part) (regcache_cooked_read, regcache_cooked_write) (regcache_raw_supply, regcache_raw_collect) (regcache_cooked_read_ftype, regcache_save, regcache_restore) (deprecated_read_register_gen, deprecated_write_register_gen) (deprecated_read_register_bytes, deprecated_write_register_bytes) (deprecated_grub_regcache_for_registers): Use gdb_byte for byte buffer parameters. * ia64-tdep.c (ia64_extract_return_value): Update. * frame.c (do_frame_register_read): Update. * regcache.c (deprecated_grub_regcache_for_registers) (struct regcache, regcache_save, regcache_restore, regcache_cpy) (do_cooked_read, regcache_xmalloc, register_buffer) (deprecated_read_register_bytes, regcache_raw_read) (regcache_raw_read_signed, regcache_raw_read_unsigned) (deprecated_read_register_gen, regcache_cooked_read) (regcache_cooked_read_signed, regcache_cooked_read_unsigned) (deprecated_write_register_gen, regcache_cooked_write) (deprecated_write_register_bytes, regcache_raw_read_part) (regcache_raw_write_part, regcache_cooked_read_part) (regcache_cooked_write_part, read_register, regcache_raw_supply): 2005-05-17 Corinna Vinschen <vinschen@redhat.com> * MAINTAINERS: Undelete v850. * Makefile.in: Re-add v850-tdep.o dependencies. * configure.tgt: Re-add v850. * v850-tdep.c: Reorder code slightly. Add register number enumerator. (struct v850_frame_cache): New structure. (v850_processor_type_table): Remove. Move functionality into v850_register_name, v850e_register_name and v850_gdbarch_init. (v850_register_name): New function. (v850e_register_name): New function. (struct prologue_info): Remove definition. (v850_register_type): New function. (v850_type_is_scalar): New function. (v850_use_struct_convention): Align to gcc behaviour. (v850_handle_prepare): Renamed from handle_prepare. Change third parameter to struct v850_frame_cache *. (v850_handle_pushm): Renamed from handle_pushm. Change third parameter to struct v850_frame_cache *. (v850_is_save_register): New function to evaluate if a register is caller-save. (v850_analyze_prologue): Replace v850_scan_prologue. Change to support new frame code. (v850_init_extra_frame_info): Remove. (v850_frame_chain): Remove. (v850_find_callers_reg): Remove. (v850_skip_prologue): Make static. (v850_pop_frame): Remove. (v850_frame_align): New function. (v850_push_dummy_call): Replace v850_push_arguments. (v850_push_return_address): Remove. (v850_extract_return_value): New function. (v850_store_return_value): New function. (v850_return_value): New function. (v850_frame_saved_pc): Remove. (v850_breakpoint_from_pc): New function. (v850_alloc_frame_cache): New function. (v850_fix_call_dummy): Remove. (v850_frame_cache): New function. (v850_target_architecture_hook): Remove. (v850_frame_prev_register): New function. (v850_frame_this_id): New function. (v850_frame_unwind): New structure. (v850_frame_sniffer): New function. (v850_unwind_sp): New function. (v850_unwind_pc): New function. (v850_unwind_dummy_id): New function. (v850_frame_base_address): New function. (v850_frame_base): New structure. (v850_gdbarch_init): New function. * config/v850/v850.mt: Undelete. Drop TM_FILE. 2005-05-17 Daniel Jacobowitz <dan@codesourcery.com> Dennis Brueni <dennis@slickedit.com> * stack.c (print_frame): In MI mode, output a fullname attribute with the stack frame. 2005-05-16 Mark Kettenis <kettenis@gnu.org> * corelow.c (core_xfer_partial): Change type of readbuf and writebuf to `gdb_byte *'. * sparc-nat.c (sparc_xfer_wcookie, sparc_xfer_partial): Change type of readbuf and writebuf to `gdb_byte *'. * bsd-uthread.c (bsd_uthread_xfer_partial): Change type of readbuf and writebuf to `gdb_byte *'. * inf-ptrace.c (inf_ptrace_xfer_partial): Change type of readbuf and writebuf to `gdb_byte *'. * bsd-kvm.c (bsd_kvm_xfer_memory): Replace. (bsd_kvm_xfer_partial): New function. (bsd_kvm_add_target): Set to_xfer_partial instead of to_xfer_memory. * bfd-target.c (target_bfd_xfer_partial): Change type of readbuf and writebuf to `gdb_byte *'. * target.c (deprecated_debug_xfer_memory): Remove prototype. (deprecated_debug_xfer_memory): Change type of second argument to `gdb_byte *'. * remote.c (remote_xfer_memory): Remove prototype. (remote_xfer_memory): Change type of second argument to `gdb_byte *'. (remote_xfer_partial): Change type of readbuf and writebuf to `gdb_byte *'. * config/sparc/fbsd.mt (TDEPFILES): Add solib.o and solib-svr4.o. * config/sparc/fbsd.mh (NATDEPFILES): Remove solib.o, solib-svr4.o and solib-legacy.o. (NAT_FILE): Remove. 2005-05-16 Ulrich Weigand <uweigand@de.ibm.com> * s390-tdep.c (s390_return_value): Remove unnecessary casts. (s390_breakpoint_from_pc): Change type of return value and 'breakpoint' to const gdb_byte *. 2005-05-16 Ulrich Weigand <uweigand@de.ibm.com> * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write): Change type of 'buf' argument to gdb_byte *. (s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise. (s390_register_to_value): Change type of 'out' to gdb_byte *, change type of 'in' to gdb_byte []. (s390_value_to_register): Change type of 'in' to gdb_byte *, change type of 'out' to gdb_byte []. (s390_return_value): Change type of 'out' and 'in' to gdb_byte *. 2005-05-16 Andrew Cagney <cagney@gnu.org> * target.h (target_read_partial, target_write_partial) (do_xfer_memory, xfer_memory, target_read, target_write) (get_target_memory): For buffers, change "void*" to gdb_byte. (struct target_ops): Ditto for to_xfer_partial and deprecated_xfer_memory. * dcache.h (dcache_xfer_memory): Ditto. * target.c (default_xfer_partial, target_read_partial) (target_write_partial, target_read, target_write) (do_xfer_memory, update_current_target, get_target_memory): Update. (target_read_string): Change buf to a gdb_byte. * dcache.c (dcache_xfer_memory): Update. * exec.c (xfer_memory): Make buffer type to gdb_byte. * mem-break.c (default_memory_insert_breakpoint): Remove cast. * disasm.c (dis_asm_read_memory): Remove cast, use gdb_byte. 2005-05-16 Mark Kettenis <kettenis@gnu.org> * sol-thread.c (ignore): Change last argument to `gdb_byte.' * config/i386/fbsd.mt (DEPRECATED_TM_FILE): Remove. * config/i386/fbsd64.mt (DEPRECATED_TM_FILE): Remove. * config/i386/nbsd.mt (DEPRECATED_TM_FILE): Remove. * config/i386/nbsd64.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/nbsd.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/nbsd64.mt (DEPRECATED_TM_FILE): Remove. * observer.sh: Quote $DJGPP. 2005-05-15 Daniel Jacobowitz <dan@codesourcery.com> * Makefile.in (.y.c): Update ylwrap invocation. 2005-05-15 Daniel Jacobowitz <dan@codesourcery.com> * linux-nat.c (child_follow_fork, linux_handle_extended_wait) (lin_lwp_attach_lwp, linux_nat_attach, wait_lwp, child_wait) (linux_nat_wait, kill_wait_callback): Use my_waitpid. (_initialize_linux_nat, lin_thread_get_thread_signals): Use SA_RESTART. 2005-05-14 Mark Kettenis <kettenis@gnu.org> * configure.tgt (vax-*-openbsd*): Set gdb_target to obsd. * config/vax/obsd.mt (TDEPFILES): New file. * i386-tdep.c (i386_supply_gregset, i386_collect_gregset): Use gdb_byte instead of bfd_byte. * mips-tdep.c (mips_pseudo_register_read) (mips_pseudo_register_write): Change type of last argument to `gdb_byte *'. (mips_register_to_value, mips_value_to_register): Change type of last argument to `gdb_byte *'. Remove casts that are no longer needed. (mips_fetch_instruction, fetch_mips_16): Use gdb_byte for buf. (mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call) (mips_o32_push_dummy_call, mips_o32_return_value): Use `const gdb_byte *' for val and gdb_byte for valbuf. Remove casts that are no longer needed. (mips_eabi_return_value, mips_n32n64_return_value) (mips_o32_return_value, mips_o64_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. (mips_read_fp_register_single): Change type of last argument to `gdb_byte *'. Use `gdb_byte *' for raw_buffer. (mips_read_fp_register_double): Change type of last argument to `gdb_byte *'. (mips_print_fp_register): Use `gdb_byte *' for raw_buffer. Remove casts that are no longer needed. (mips_print_register, print_gp_register_row): Use gdb_byte for raw_buffer. Remove casts that are no longer needed. (mips_single_step_through_delay): Use gdb_byte for buf. (mips_breakpoint_from_pc): Change return type to `const gdb_byte *'. Use gdb_byte for mips16_big_breakpoint, big_breakpoint, pmon_big_breakpoint, idt_big_breakpoint, mips16_little_breakpoint, little_breakpoint, pmon_little_breakpoint and idt_little_breakpoint. (mips_integer_to_address): Use `gdb_byte *' for tmp. * config/m68k/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/i386/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/i386/obsd64.mt (DEPRECATED_TM_FILE): Remove. * config/pa/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/obsd.mt (DEPRECATED_TM_FILE): Remove. * config/sparc/obsd64.mt (DEPRECATED_TM_FILE): Remove. * sparc-tdep.c (sparc_fetch_instruction, sparc_fetch_wcookie): Use gdb_byte for buf. (sparc32_pseudo_register_read, sparc32_pseudo_register_write): Change type of last argument to `gdb_byte *'. Remove casts that are no longer needed. (sparc32_push_dummy_code, sparc32_store_arguments): Use gdb_byte for buf. (sparc_breakpoint_from_pc): Change return type to `const gdb_byte *'. Use gdb_byte for break_insn. (sparc32_extract_return_value, sparc32_store_return_value): Change type of last argument to `gdb_byte *'. Use gdb_byte for buf. (sparc32_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. (sparc_software_single_step): Use gdb_byte for npc_save and nnpc_save. (sparc_supply_rwindow, sparc_collect_rwindow): Use gdb_byte for buf. (sparc32_supply_gregset, sparc32_collect_gregset) (sparc32_supply_fpregset, sparc32_collect_fpregset): Use `gdb_byte *' for regs. * sparc64-tdep.c (sparc64_pseudo_register_read) (sparc64_pseudo_register_write): Change type of last argument to `gdb_byte *'. Remove casts that are no longer needed. (sparc64_store_floating_fields, sparc64_extract_floating_fields): Change type of valbuf argument to `gfd_byte *'. (sparc64_store_arguments): Use `gdb_byte *' for valbuf. use gdb_byte for buf. (sparc64_extract_return_value, sparc64_store_return_value): Change type of last argument to `gdb_byte *'. Use gdb_byte for buf. (sparc64_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. (sparc64_supply_gregset, sparc64_collect_gregset) (sparc64_supply_fpregset, sparc64_collect_fpregset): Use `gdb_byte *' for regs. * m68k-tdep.c (m68k_local_breakpoint_from_pc): Change return type to `const gdb_byte *'. Use gdb_byte for break_insn. (m68k_register_to_value): Change type of last argument to `gdb_byte *'. Use gdb_byte for from. (m68k_value_to_register): Change type of last argument to `gdb_byte *'. Use gdb_byte for to. (m68k_extract_return_value): Change type of last argument to `gdb_byte *'. Use gdb_byte for buf. Remove unnecessary cast. (m68k_svr4_extract_return_value): Change type of last argument to `gdb_byte *'. Use gdb_byte for buf. (m68k_store_return_value): Change type of last argument to `gdb_byte *'. Remove unnecessary cast. (m68k_svr4_store_return_value): Change type of last argument to `gdb_byte *'. Use gdb_byte for buf. (m68k_return_value, m68k_svr4_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. (m68k_push_dummy_call, m68k_unwind_pc, m68k_frame_cache) (m68k_unwind_dummy_id): Use gdb_byte for buf. (m68k_get_longjmp_target): Use `gdb_byte *' for buf. * m68kbsd-tdep.c (m68kbsd_supply_fpregset) (m68kbsd_supply_gregset): Use `gdb_byte *' for regs. * m88k-tdep.c (m88k_breakpoint_from_pc): Change return type to `const gdb_byte *'. Use gdb_byte for break_insn. (m88k_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. Use gdb_byte for buf. (m88k_supply_gregset): Use `gdb_byte *' for regs. * vax-tdep.c (vax_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. * amd64-tdep.c (amd64_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. Remove now redundant casts. * i386-tdep.c (i386_return_value): Change type of readbuf and writebuf arguments to `gdb_byte *'. (i386_pseudo_register_read, i386_pseudo_register_write): Change type of last argument to `gdb_byte *'. (i386_register_to_value, i386_value_to_register): Change type of last argument to `gdb_byte *'. Simplify function a bit. * i387-tdep.h (i387_value_to_register, i387_register_to_value): Change type of last argument to `gdb_byte *'. * i387-tdep.c: Likewise. 2005-05-13 Andrew Cagney <cagney@gnu.org> * gdbarch.sh (pseudo_register_read, pseudo_register_write) (value_to_register, register_to_value, pointer_to_address) (address_to_pointer, return_value, extract_return_value) (store_return_value): Instead of a void pointer, use gdb_byte. * gdbarch.h, gdbarch.c: Regenerate. * inferior.h (unsigned_address_to_pointer) (signed_pointer_to_address, address_to_signed_pointer) (unsigned_pointer_to_address): Update. * arch-utils.h (legacy_return_value): * arch-utils.c (legacy_extract_return_value) (legacy_return_value): Update. * findvar.c (unsigned_pointer_to_address) (signed_pointer_to_address, unsigned_address_to_pointer) (address_to_signed_pointer): Update. 2005-05-13 Orjan Friberg <orjanf@axis.com> * cris-tdep.c (_initialize_cris_tdep): Improve help strings for cris-version, cris-mode, and cris-dwarf2-cfi settings. 2005-05-13 Orjan Friberg <orjanf@axis.com> * cris-tdep.c (usr_cmd_cris_version): Change type to int. (cris_mode_normal, cris_mode_guru, cris_modes, usr_cmd_cris_mode): Add. (struct gdbarch_tdep): Change type of cris_version to int. Add cris_mode. (cris_mode, set_cris_mode): New functions. (crisv32_single_step_through_delay): Read from NRP register instead of ERP register in guru mode. (cris_breakpoint_from_pc): Rename break_insn to break8_insn. Add break15_insn, returned in guru mode. (_initialize_cris_tdep): Add call to add_setshow_enum_cmd for new cris-mode setting. (cris_dump_tdep): Add dump of cris_mode. (cris_gdbarch_init): Add cris_mode to search criteria for architecture. Register the sigtramp frame sniffer only if not in guru mode. 2005-05-13 Eli Zaretskii <eliz@gnu.org> * Makefile.in (go32-nat.o): Add $(top_h) to prerequisites. * go32-nat.c: Include top.h. Update copyright years. (init_go32_ops): Override the default value of gdbinit[] with "gdb.ini". * cli/cli-cmds.c: Don't define GDBINIT_FILENAME. (init_cli_cmds): Use gdbinit[] instead of a compile-time literal string GDBINIT_FILENAME. * top.c (PATH_MAX): Define if not defined. (gdbinit): Declare with a constant size PATH_MAX. * config/i386/go32.mh (XM_FILE): Remove. * config/i386/xm-go32.h: Remove file. 2005-05-12 Mark Kettenis <kettenis@gnu.org> * sol-thread.c: Include "solib.h". (sol_thread_attach): Use solib_add instead of SOLIB_ADD. * Makefile.in (sol-thread.o): Update dependencies. * NEWS: Mention OpenBSD/mips64 as a new native configuration. 2005-05-12 Eli Zaretskii <eliz@gnu.org> * observer.sh (texi) [DJGPP]: If the file name includes a colon, convert it to the /dev/x/ form. 2005-05-12 Mark Kettenis <kettenis@gnu.org> * solib.h (CLEAR_SOLIB, SOLIB_ADD) (SOLIB_CREATE_INFERIOR_HOOK, SOLIB_REMOVE_INFERIOR_HOOK) (SOLIB_IN_DYNAMIC_LINKER, SOLIB_RESTART) (DISABLE_UNSETTABLE_BREAK, PC_SOLIB) (IN_SOLIB_DYNSYM_RESOLVE_CODE): Remove defines and orphaned comments. * breakpoint.c: Include "solib.h". (insert_bp_location) [!DISABLE_UNSETTABLE_BREAK]: Call solib_address. (remove_solib_event_breakpoints, create_solib_event_breakpoint) (disable_breakpoints_in_shlibs) (disable_breakpoints_in_unloaded_shlib) (re_enable_breakpoints_in_shlibs): Compile if SOLIB_ADD isn't defined. If PC_SOLIB isn't defined, call solib_address. (_initialize_breakpoint): Unconditionally install observer. * corelow.c: Include "solib.h". [SOLIB_ADD] (solib_add_stub): Remove prototype. (core_close) [!CLEAR_SOLIB]: Call clear_solib. (solib_add_stub) [!SOLIB_ADD] Call solib_add. (core_open): Unconditionally call solib_add_stub. * fork-child.c: Include "solib.h". (fork_inferior) [!SOLIB_CREATE_INFERIOR_HOOK]: Call solib_create_inferior_hook. * infcmd.c: Include "solib.h". (attach_command) [!SOLIB_ADD]: Call shlib_rescan. Unconditionally call re_enable_breakpoints_in_shlibs. * infrun.c: Include "solib.h". (SOLIB_IN_SYNSYM_RESOLVE_CODE): Don't define if not already defined. (stop_on_solib_events, show_stop_on_solib_events): Include unconditionally. (follow_exec) [!SOLIB_CREATE_INFERIOR_HOOK]: Call solib_create_inferior_hook. (handle_inferior_event) [!SOLIB_ADD]: Call shlib_add. [!IN_SOLIB_DYNSYM_RESOLVE_CODE]: Call in_solib_dynsym_resolve_code. (_initialize_infrun): Unconditionally add "stop_on_solib-events" command. * remote.c: Include "solib.h". (remote_open_1): Unconditionally call no_shared_libraries. [!SOLIB_CREATE_INFERIOR_HOOK] Call solib_create_inferior_hook. * stack.c: Include "solib.h". (print_frame) [!PC_SOLIB] Call shlib_for_pc. * xcoffsolib.c (no_shared_libraries): Remove function. * Makefile.in (SFILES): Add solib.c. (ALLDEPFILES): Remove solib.c. (COMMON_OBS): Add solib.o. (breakpoint.o, corelow.o, fork-chiled.o, infcmd.o, infrun.o) (remote.o, stack.o): Update dependencies. 2005-05-12 Daniel Jacobowitz <dan@codesourcery.com> * cp-names.y: Renamed to ... * cp-name-parser.y: ... this. * Makefile.in (SFILES, YYFILES, YYOBJ): Rename cp-names.y to cp-name-parser.y. (test-cp-names.o): Renamed to test-cp-name-parser.o. (test-cp-names): Renamed to test-cp-name-parser. (clean, local-maintainer-clean): Update. (cp-names.o): Renamed to cp-name-parser.o. 2005-05-12 Eli Zaretskii <eliz@gnu.org> * observer.sh: Use observer.tmp instead of observer.inc-tmp which on 8+3 filesystems overwrites observer.inc. Update copyright year of the resultant file. * gnu-v3-abi.c (init_gnuv3_ops): Cast is_gnu_v3_mangled_dtor and is_gnu_v3_mangled_ctor to avoid compiler warnings. * config/djgpp/config.sed: Adapt to latest Autoconf. * config/djgpp/djconfig.sh: Add -Wpointer-arith and -Wuninitialized to the build warnings. 2005-05-11 Eli Zaretskii <eliz@gnu.org> * config/djgpp/fnchange.lst: Add mappings for inttypes*.m4, ChangeLog-2004, reg-cris*.dat, dw2-intermix.*, semcris*-switch.c. Fix mappings for hilo-hazard-?.s. * config/djgpp/README: Update GDB versions and my email address. 2005-05-09 Andrew Cagney <cagney@gnu.org> Use gdb_byte in preference to bfd_byte. * gdbarch.sh: Update. * gdbarch.h, gdbarch.c: Re-generate. * ada-lang.c, ada-lang.h, ada-valprint.c, arch-utils.c: Update. * c-lang.c, c-lang.h, c-valprint.c, cp-valprint.c: Update. * f-lang.c, f-lang.h, f-valprint.c, gdbcore.h, jv-lang.h: Update. * jv-valprint.c, language.c, language.h, m2-lang.c: Update. * m2-lang.h, m2-valprint.c, objc-lang.c, p-lang.c: Update. * p-lang.h, p-valprint.c, regcache.c, scm-lang.c: Update. * scm-lang.h, scm-valprint.c, target.c, target.h: Update. * tramp-frame.c, valarith.c, valops.c, valprint.c: Update. * valprint.h, value.c, value.h: Update. 2005-05-09 Mark Kettenis <kettenis@gnu.org> * vaxbsd-nat.c (vaxbsd_supply_gregset, vaxbsd_collect_gregset): Use `gdb_byte *' for regs. * vax-tdep.c (vax_supply_gregset): Use `gdb_byte *' for regs; (vax_store_arguments, vax_push_dummy_call, vax_return_value): Use gdb_byte for buf. (vax_breakpoint_from_pc): Change return type to `const gdb_byte *'. Use gdb_byte for break_insn. (vax_skip_prologue): Use gdb_byte for op. * i387-tdep.c: Remove outdated comments. * defs.h: Unconditionally include <sys/types.h>. 2005-05-08 Daniel Jacobowitz <dan@codesourcery.com> * mips-tdep.c (mips_stub_frame_sniffer): Handle .MIPS.stubs section like .plt. 2005-05-08 Mark Kettenis <kettenis@gnu.org> * i386-linux-tdep.c (linux_sigtramp_code, linux_rt_sigtramp_code): Change type to `static const gdb_byte'. (i386_linux_sigtramp_start, i386_linux_rt_sigtramp_start) (i386_linux_sigcontext_addr): Use gdb_byte for buf. * amd64-linux-tdep.c (linux_sigtramp_code): Change type to `static const gdb_byte'. (amd64_linux_sigtramp_start, amd64_linux_sigcontext_addr): Use gdb_byte for buf. * amd64fbsd-tdep.c (amd64fbsd_supply_uthread) (amd64fbsd_collect_uthread): Use gdb_byte for buf. * config/ia64/nm-aix.h: Remove file. * amd64-tdep.c (amd64_return_value): Use `gdb_byte *' in casts. (amd64_push_arguments): Use gdb_byte instead of bfd_byte. Use gdb_byte for buf. (amd64_push_dummy_call): Use gdb_byte for buf. (amd64_analyze_prologue): Use gdb_byte for proto, buf and op. (amd64_frame_cache, amd64_sigtramp_frame_cache) (amd64_unwind_dummy_id): Use gdb_byte for buf. (amd64_supply_fxsave, amd64_collect_fxsave): Use `gdb_byte *' for regs. * amd64obsd-tdep.c (amd64obsd_supply_regset): Use `gdb_byte *' in casts. (amd64obsd_sigtramp_p): Use gdb_byte for sigreturn and `gdb_byte *' for buf, * i386-tdep.c (i386_breakpoint_from_pc): Change return type to `const gdb_byte *'. Use gdb_byte for break_insn. (i386_follow_jump): Use gdb_byte for op. (i386_analyze_struct_return): Use gdb_byte for proto1, proto2, buf and op. (i386_skip_probe): Use gdb_byte for buf and op. (struct i386_insn): Use gdb_byte for insn and mask. (i386_match_insn, i386_analyze_frame_setup) (i386_analyze_register_saves): Use gdb_byte for op. (i386_skip_prologue): Use gdb_byte for pic_pat and op; (i386_unwind_pc, i386_frame_cache, i386_sigtramp_frame_cache) (i386_unwind_dummy_id, i386_get_longjmp_target): Use gdb_byte for buf. (i386_extract_return_value, i386_store_return_value): Use `gdb_byte *' instead of `void *' for valbuf argument. Remove now redundant cast. (i386_pseudo_register_read, i386_pseudo_register_write): Use gdb_byte for mmx_buf. (i386_register_to_value, i386_value_to_register): Use `gdb_byte *' instead of `char *' for buf. (i386_supply_gregset, i386_collect_gregset): Use `gdb_byte *' instead of `char *' for regs. (i386_svr4_sigcontext_addr): Use gdb_byte for buf. * i386obsd-tdep.c (i386obsd_sigtramp_p): Use gdb_byte for sigreturn and `gdb_byte *' for buf. (i386obsd_aout_supply_regset): Use `const gdb_byte *' in cast. (i386obsd_supply_uthread, i386obsd_collect_uthread): Use gdb_byte for buf. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Use gdb_byte for buf. * defs.h (gdb_byte): New typedef. Tweak comments. * target.h (target_link): Remove prototype. * target.c (target_link): Remove function. * symfile.c: Remove comment about rombug. 2005-05-04 Mark Kettenis <kettenis@gnu.org> * config/i386/cygwin.mh (XM_FILE): Remove variable. * config/i386/xm-cygwin.h: Remove file. 2005-05-03 Ben Elliston <bje@au.ibm.com> * infrun.c (handle_inferior_event): Update the comment about users of stepped_after_stopped_by_watchpoint. 2005-05-02 Corinna Vinschen <vinschen@redhat.com> * MAINTAINERS: Remove hint that sh64 doesn't build. * sh64-tdep.c (sh64_push_dummy_call): Cast buf in call to write_memory. (sh64_do_fp_register): make raw_buffer unsigned. (sh64_do_register): Ditto. 2005-05-02 Mark Kettenis <kettenis@gnu.org> * bsd-uthread.c: Include "solib.h". * Makefile.in (bsd-uthread.o): Update dependencies. 2005-05-01 Daniel Jacobowitz <dan@codesourcery.com> * gdbarch.sh (deprecated_current_gdbarch_select_hack): Flush cached frames when changing gdbarch. * gdbarch.c: Regenerated. 2005-05-01 Andrew Cagney <cagney@gnu.org> * MAINTAINERS: Note that cris, m68k, mn10300, sh64, sparc and vax do not build. * gdbarch.sh (deprecated_extract_return_value) (breakpoint_from_pc, deprecated_store_return_value) (memory_insert_breakpoint, memory_remove_breakpoint): Change type of buffer to a bfd_byte pointer. * gdbarch.h, gdbarch.c: Re-generate. * mem-break.c (memory_insert_breakpoint) (memory_remove_breakpoint, default_memory_insert_breakpoint) (default_memory_remove_breakpoint): Update. * target.h (memory_insert_breakpoint) (memory_remove_breakpoint, default_memory_insert_breakpoint) (default_memory_remove_breakpoint): Update declarations. (struct target_ops): Update to_insert_breakpoint and to_remove_breakpoint. * target.c (debug_to_remove_breakpoint) (debug_to_insert_breakpoint): Update. * remote-m32r-sdi.c (m32r_remove_breakpoint) (m32r_insert_breakpoint): Update. * m32r-tdep.c (m32r_memory_insert_breakpoint) (m32r_memory_remove_breakpoint): Update. * remote-e7000.c (e7000_insert_breakpoint) (e7000_remove_breakpoint): Update. * remote-rdi.c (arm_rdi_insert_breakpoint) (arm_rdi_remove_breakpoint): Update. * remote-sim.c (gdbsim_insert_breakpoint) (gdbsim_remove_breakpoint): Update. * exec.c (ignore): Update. * rs6000-tdep.c (rs6000_extract_return_value): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint) (ia64_memory_remove_breakpoint): Update. * remote-rdp.c (remote_rdp_insert_breakpoint) (remote_rdp_remove_breakpoint): Update. 2005-05-01 Mark Kettenis <kettenis@gnu.org> * somsolib.c, somsolib.h: Remove files. * Makefile.in (somsolib_h): Remove. (somsolib.o): Remove dependency. * fbsd-nat.c: Include <sys/sysctl.h>. (fbsd_pid_to_exec_file): Use KERN_PROC_PATHNAME sysctl if available. Plug memory leak. Fixes PR gdb/1922. 2005-04-29 Mark Kettenis <kettenis@gnu.org> * solist.h (TARGET_SO_FREE_SO, TARGET_SO_CLEAR_SOLIB) (TARGET_SO_SOLIB_CREATE_INFERIOR_HOOK) (TARGET_SO_SPECIAL_SYMBOL_HANDLING, TARGET_SO_CURRENT_SOS) (TARGET_SO_OPEN_SYMBOL_FILE_OBJECT): Remove defines. * solib.c (solib_data): New variable. (solib_init, solib_ops): New functions. (solib_open, solib_map_sections, free_so, update_solib_list) (solib_add, clear_solib, solib_create_inferior_hook) (in_solib_dynsym_resolve_code): Call architecture-dependent code using solib_ops. (_initialize_solib): Register SOLIB_DATA. 2005-04-29 Kevin Buettner <kevinb@redhat.com> * frv-tdep.c (find_func_descr): Verify that entry point can be found in symbol table prior to looking up its function descriptor. * solib-frv.c (find_canonical_descriptor_in_load_object): Add test for non-NULL link map. 2005-04-29 Corinna Vinschen <vinschen@redhat.com> * MAINTAINERS: Revert h8300 state to un-deleted. * Makefile.in: Re-add h8300-tdep.o dependencies. * h8300-tdep.c: Slightly rearrange type definitions and functions. (struct frame_extra_info): Remove. (struct h8300_frame_cache): Replace locals with differently defined uses_fp member. (h8300_unwind_pc): Simplify. (h8300_unwind_sp): New function. (h8300_unwind_dummy_id): Simplify. (h8300_init_frame_cache): New function. (h8300_is_argument_spill): Use reworked defines for opcode scanning. (h8300_skip_prologue): Rewrite. (h8300_alloc_frame_cache): Remove. (h8300_analyze_frame_setup): Remove. (h8300_analyze_register_saves): Remove. (h8300_analyze_prologue): Rewrite. (h8300_frame_cache): Use h8300_init_frame_cache instead of h8300_alloc_frame_cache. Use BINWORD instead of constant 4 to accomodate 16 bit mode. Fix saved_sp and register offset evaluation. (h8300_frame_this_id): Correctly calculate this_id using saved stack pointer instead of base. (h8300_frame_prev_register): Drop needless braces. (h8300_frame_base_address): New function. (h8300_frame_base): New frame_base. (h8300_push_dummy_call): Return correct CFA value. (h8300h_extract_return_value): Fix 8 byte value handling. (h8300_use_struct_convention): New function. (h8300h_use_struct_convention): New function. (h8300h_store_return_value): Fix 8 byte value handling. (h8300_return_value): New function. (h8300h_return_value): New function. (h8300_extract_struct_value_address): Remove deprecated functionality. (h8300_push_dummy_code): Remove. (h8300_gdbarch_init): Replace set_gdbarch_extract_return_value and set_gdbarch_store_return_value calls by set_gdbarch_return_value. Remove calls to set_gdbarch_deprecated_fp_regnum, set_gdbarch_deprecated_extract_struct_value_address, set_gdbarch_deprecated_use_struct_convention and set_gdbarch_push_dummy_code. Add calls to set_gdbarch_unwind_sp and frame_base_set_default. Slightly rearrange code. 2005-04-28 Jim Blandy <jimb@redhat.com> * parse.c (namecopy): Change allocation conventions. (namecopy_size): New variable. (copy_name): Allocate namecopy using xrealloc, instead of assuming it has adequate space allocated to it. (parse_exp_1): Don't try to allocate space for namecopy here. 2005-04-28 Eli Zaretskii <eliz@gnu.org> * cli/cli-cmds.c (edit_command): If symtab->fullname is not yet set, use symtab_to_fullname, instead of trying to do its job. Use xstrprintf instead of malloc and sprintf. 2005-04-28 Kevin Buettner <kevinb@redhat.com> * remote.c (init_remote_state): Eliminate use of deprecated_register_bytes(). 2005-04-28 Andrew Cagney <cagney@gnu.org> * valops.c (check_field): Make buffer a bfd_byte. * value.c (unpack_long, unpack_double, unpack_pointer) (unpack_field_as_long, modify_field): Ditto. * value.h: Update declarations. 2005-04-28 Paul Brook <paul@codesourcery.com> * exceptions.c (print_flush): Handle NULL gdb_stdout_serial. 2005-04-27 Mark Kettenis <kettenis@gnu.org> * solib-svr4.c (_initialize_svr4_solib) [SVR4_FETCH_LINK_MAP_OFFSETS]: Don't set non-existent variable svr4_legacy_fetch_link_map_offsets. * sh-tdep.c (sh_linux_svr4_fetch_link_map_offsets): Remove function. (sh_gdbarch_init): Remove redundant prototype. * sh-linux-tdep.c: New file. * config/sh/tm-linux.h (sh_linux_svr4_fetch_link_map_offsets): Remove prototype. (SVR4_FETCH_LINK_MAP_OFFSETS): Remove define. * config/sh/linux.mt (TDEPFILES): Add sh64-tdep.o, remove solib-legacy.o. * Makefile.in (sh-linux-tdep.o): New. * solib-svr4.c: Update copyright year. Include "gdb_assert.h". (SVR4_FETCH_LINK_MAP_OFFSETS): Don't define if not already defined. (legacy_fetch_link_map_offsets): Remove prototype. (fetch_link_map_offsets_gdbarch_data): Remove. (LM_ADDR, LM_NEXT, IGNORE_FIRST_LINK_MAP_ENTRY) (first_link_map_member, open_symbol_file_object, svr4_current_sos) (svr4_fetch_objfile_link_map): Call svr4_fetch_link_map_offsets instead of SVR4_FETCH_LINK_MAP_OFFSETS. (solib_svr4_data): New variable. (struct solib_svr4_ops): New. (solib_svr4_init): New fynction. (legacy_fetch_link_map_offsets, init_fetch_link_map_offsets): Remove functions. (svr4_fetch_link_map_offsets, svr4_have_link_map_offsets): Rewrite using the new `struct solib_svr4_ops'. (_initialize_svr4_solib): Replace registration of per-architecture data. Add temporary hack to set svr4_legacy_fetch_link_map_offsets if SVR4_FETCH_LINK_MAP_OFFSETS is set. * Makefile.in (solib-svr4.o): Update dependencies. 2005-04-26 Mark Kettenis <kettenis@gnu.org> * configure.tgt (*-*-freebsd*): Set gdb_osabi to GDB_OSABI_FREEBSD_ELF. Partial fix for PR gdb/1922. 2005-04-26 Andrew Cagney <cagney@gnu.org> * remote.c (remote_open_1): Move "ex"'s declaration to where it is used. (remote_get_thread_local_address): Use throw_error, include a printed string. * linux-thread-db.c (thread_db_get_thread_local_address): Ditto. * dwarf2loc.c (dwarf_expr_tls_address): Ditto. * cli/cli-script.c (script_from_file): Mark up throw_error message. * linespec.c (symtab_from_filename, decode_variable): Ditto. 2005-04-26 Andrew Cagney <cagney@gnu.org> Rename 'struct exception' to 'struct gdb_exception'. * wrapper.c: Update. * varobj.c: Update. * tui/tui-interp.c: Update. * remote.c: Update. * mi/mi-main.c: Update. * mi/mi-interp.c: Update. * linux-thread-db.c: Update. * interps.h: Update. * interps.c: Update. * exceptions.h: Update. * exceptions.c: Update. * dwarf2loc.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * breakpoint.c: Update. 2005-04-25 Mark Mitchell <mark@codesourcery.com> * event-loop.c (gdb_select): Program defensively. * event-loop.c (gdb_assert.h): Include. (<windows.h>): Include under Windows. (<io.h>): Likeiwse. (gdb_select): New function. (gdb_wait_for_event): Use it. * Makefile.in (event-loop.o): Depend on $(gdb_assert_h). 2005-04-23 Mark Kettenis <kettenis@gnu.org> * sparc64-tdep.c: Include "dwarf2-frame.h". (sparc64_dwarf2_frame_init_reg): New function. * Makefile.in (sparc64-tdep.o): Update dependencies. 2005-04-22 David S. Miller <davem@davemloft.net> * sparc64-linux-tdep.c (sparc64_linux_init_abi): Add call to sparc64_init_abi(). 2005-04-22 Mark Kettenis <kettenis@gnu.org> * ser-base.c: Include "ser-base.h" instead of "ser-unix.h". 2005-04-22 Mark Mitchell <mark@codesourcery.com> * ser-base.c (<sys/time.h>): Include. 2005-04-22 Mark Kettenis <kettenis@gnu.org> * ppcobsd-tdep.c (ppcobsd_init_abi): Set return_value. * sparc-linux-tdep.c: Reorder includes. Tweak a few comments. (LINUX32_SIGTRAMP_INSN0, LINUX32_SIGTRAMP_INSN1) (LINUX32_RT_SIGTRAMP_INSN0, LINUX32_RT_SIGTRAMP_INSN1): Remove macros. (sparc32_linux_sigframe, sparc32_linux_rt_sigframe): Hardcode instructions. * sparc64-linux-tdep.c: Reorder includes. Tweak a few comments. (LINUX64_RT_SIGTRAMP_INSN0, LINUX64_RT_SIGTRAMP_INSN1): Remove macros. (sparc64_linux_rt_sigframe): Hardcode instructions. * Makefile.in (sparc-linux-tdep.o, sparc64-linux-tdep.o): Update dependencies. * sparc-linux-tdep.c: Update copyright year. (sparc32_linux_init_abi): Set skip_trampoline_code and solib_svr4_fetch_link_map_offsets. Set TDEP->plt_entry_size. Don't set software_single_step and don't call sparc32_sol2_init_abi. * sparc64-linux-tdep.c: Update copyright year. (sparc64_linux_init_abi): Set skip_trampoline_code and solib_svr4_fetch_link_map_offsets. Set TDEP->plt_entry_size. Don't set software_single_step and don't call sparc64_sol2_init_abi. 2005-04-22 Eli Zaretskii <eliz@gnu.org> * remote-st.c (_initialize_remote_st2000): Remove the extraneous "<command>" string from the call to add_com. * remote-sim.c (_initialize_remote_sim): Ditto. * remote-utils.c (_initialize_sr_support): Ditto. * remote-mips.c (_initialize_remote_mips): Ditto. 2005-04-21 David S. Miller <davem@davemloft.net> * sparc-linux-tdep.c (sparc32_linux_sigframe_init): New function. (sparc32_linux_sigframe, sparc32_linux_rt_sigframe): New tramp_frames. (sparc_linux_sigtramp_start, sparc32_linux_sigtramp_start, sparc32_linux_rt_sigtramp_start, sparc32_linux_sigtramp_p, sparc32_linux_sigtramp_frame_cache, sparc32_linux_sigtramp_frame_this_id, sparc32_linux_sigtramp_frame_prev_register, sparc32_linux_sigtramp_frame_unwind, sparc32_linux_sigtramp_frame_sniffer): Delete. (sparc32_linux_init_abi): Register new tramp unwinders. Kill register of old sigtramp sniffer. * sparc64-linux-tdep.c (sparc64_linux_sigframe_init): New function. (sparc64_linux_rt_sigframe): New tramp frame. (sparc64_linux_sigtramp_start, sparc64_linux_sigtramp_p, sparc64_linux_sigtramp_frame_cache, sparc64_linux_sigtramp_frame_this_id, sparc64_linux_sigtramp_frame_prev_register, sparc64_linux_sigtramp_frame_unwind, sparc64_linux_sigtramp_frame_sniffer): Delete. (sparc64_linux_init_abi): Register new tramp unwinders. Kill register of old sigtramp sniffer. Makefile.in (sparc64-linux-tdep.o): Update dependencies. (sparc-linux-tdep.o): Likewise. 2005-04-21 Mark Kettenis <kettenis@gnu.org> * ser-base.c: Include "gdb_string.h". * Makefile.in (ser-base.o): Update dependencies. 2005-04-20 David S. Miller <davem@davemloft.net> * sparc-linux-tdep.c (sparc32_linux_sigtramp_p): Fix signal return stub symbol names, __restore and __restore_rt are the i386 symbol names not the sparc ones. (sparc32_linux_sigtramp_frame_cache): Document bits/sigcontext.h as where the offsets were obtained from. * sparc64-linux-tdep.c (LINUX64_RT_SIGTRAMP_INSN0, LINUX64_RT_SIGTRAMP_INSN1): New defines. (sparc64_linux_sigtramp_start, sparc64_linux_sigtramp_p, sparc64_linux_sigtramp_frame_cache, sparc64_linux_sigtramp_frame_this_id, sparc64_linux_sigtramp_frame_prev_register, sparc64_linux_sigtramp_frame_sniffer): New functions. (sparc64_linux_sigtramp_frame_unwind): New frame unwinder. (sparc64_linux_init_abi): Register sigtramp frame sniffer. * Makefile.in (sparc64-linux-tdep.o): Update dependencies. 2005-04-20 Mark Mitchell <mark@codesourcery.com> * configure.ac: On MinGW, define USE_WIN32API and link with -lws2_32. * ser-tcp.c (<winsock2.h>): Include, for Windows. (ETIMEDOUT): Define, for Windows. (ioctl): Likewise. (closesocket): Define, for POSIX. (net_open): Adjust for differences in socket functions between Windows and UNIX. (net_close): Likweise. (net_read_prim): New function. (net_write_prim): Likewise. (_initialize_ser_tcp): Initialize winsock. Fill in read_prim and write_prim. * ser-unix.h (ser_unix_readcchar): Remove. (ser_unix_read_prim): Declare. (ser_unix_write_prim): Likewise. * ser-unix.c (generic_readchar): Move to ser-base.c. (ser_unix_wait_for): Likewise. (do_unix_readchar): Likewise. (ser_unix_readchar): Likewise. (_initialize_ser_hardwire): Initialize read_prim and write_prim. (ser_unix_read_prim): New function. (ser_unix_write_prim): Likewise. * ser-base.h (generic_readchar): Declare. (ser_base_readchar): Likewise. * ser-base.c (<winsock2.h>): Include, for windows. (fd_event): Use the read primitive specified by the serial interface. (ser_base_wait_for): Moved from ser-unix.c (do_ser_base_read_char): Likewise. (generic_readchar): Likewise. (ser_base_readchar): Likewise. (ser_base_write): Use the write primitive specified by the serial interface. * ser-pipe.c (_initialize_ser_pipe): Use ser_base_readchar, not ser_unix_readchar. Initialize read_prim and write_prim. * serial.c (struct serial_ops): Add read_prim and write_prim. * configure: Regenerate. 2005-04-19 Ben Elliston <bje@au.ibm.com> * c-lang.c (c_create_fundamental_type): Comment fix. 2005-04-18 Michael Snyder <msnyder@redhat.com> * mn10300-tdep.c: Assimilate code from mn10300-prologue.c. * mn10300-prologue.c: Remove. * mn10300-tdep.h: Add enums from mn10300-prologue.c. Remove prototypes. * config/mn10300/mn10300.mt: Remove mn10300-prologue module. 2005-04-18 Michael Snyder <msnyder@redhat.com> * config/mn10300/mn10300.mt: Add mn10300-prologue module. * ia64-tdep.c (ia64_get_dyn_info_list): Fix indent. 2005-04-18 Mark Kettenis <kettenis@gnu.org> * config/nm-bsd.h: Remove file. * hppabsd-nat.c: Update copyright year. Include "target.h" and "inf-ptrace.h". (hppabsd_fetch_registers): Renamed from fetch_inferior_registers; made static. (hppabsd_store_registers): Renamed from store_inferior_registers; made static. (_initialize_hppabsd_nat): New function and prototype. * config/pa/obsd.mh (NATDEPFILES): Remove infptrace.o and inftarg.o. Add inf-ptrace.o. (NAT_FILE): Remove. * Makefile.in (hppabsd-nat.o): Update dependencies. 2005-04-17 Mark Kettenis <kettenis@gnu.org> * pa64solib.c, pa64solib.h: Remove files. * Makefile.in (pa64solib_h): Remove variable (pa64solib.o): Remove dependency. 2005-04-16 Mark Kettenis <kettenis@gnu.org> * ppcobsd-nat.c: Update copyright year. Include "inf-ptrace.h". (ppcobsd_fetch_registers): Renamed from fetch_inferior_registers; made static. (ppcobsd_store_registers): Renamed from store_inferior_registers; made static. (_initialize_ppcobsd_nat): Construct and add target vector. * config/powerpc/obsd.mh (NATDEPFILES): Remove infptrace.o and inftarg.o. Add inf-ptrace.o. (NAT_FILE): Remove. * Makefile.in (ppcobsd-nat.o): Update dependencies. * ppcobsd-tdep.c: Include "floatformat.h". (ppcobsd_init_abi): Set long_double_bit and long_double_format. * Makefile.in (ppcobsd-tdep.o): Update dependencies. * ppcobsd-tdep.c: Fix typo in comment. (_initialize_ppcobsd_tdep): Register GDB_OSABI_OPENBSD_ELF for bfd_arch_rs6000 too. 2005-04-15 Kevin Buettner <kevinb@redhat.com> * remote.c (remote_get_thread_local_address): Throw a more meaningful exception when remote target doesn't have support for the qGetTLSAddr packet. 2005-04-15 Kevin Buettner <kevinb@redhat.com> * remote.c (remote_protocol_qGetTLSAddr): New static global variable. (set_remote_protocol_qGetTLSAddr_packet_cmd) (show_remote_protocol_qGetTLSAddr_packet_cmd) (remote_get_thread_local_address): New functions. (init_all_packet_configs): Initialize remote_protocol_qGetTLSAddr variable. (init_remote_ops): Initialize ``to_get_thread_local_address'' in target vector. (show_remote_cmd): Call show_remote_protocol_qGetTLS_Addr_packet_cmd(). (_initialize_remote): Register the following commands: "set remote get-thread-local-storage-address-packet" and "show remote get-thread-local-address-packet". 2005-04-15 Kevin Buettner <kevinb@redhat.com> * remote.c (add_packet_config_cmd): Delete unused variables. 2005-04-15 Kevin Buettner <kevinb@redhat.com> * remote.c (show_remote_protocol_vcont_packet_cmd ) (show_remote_protocol_qSymbol_packet_cmd) (show_remote_protocol_P_packet_cmd) (show_remote_protocol_Z_software_bp_packet_cmd) (show_remote_protocol_Z_hardware_bp_packet_cmd) (show_remote_protocol_Z_write_wp_packet_cmd) (show_remote_protocol_Z_read_wp_packet_cmd) (show_remote_protocol_Z_access_wp_packet_cmd) (show_remote_protocol_binary_download_cmd) (show_remote_protocol_qPart_auxv_packet_cmd) (show_remote_protocol_p_packet_cmd ): Delete calls to deprecated_show_value_hack(). 2005-04-15 Corinna VInschen <vinschen@redhat.com> * MAINTAINERS: Change sh64-elf state to non-broken. * Makefile.in: Fix dependencies for sh64-tdep.o. * configure.tgt: Add sh64-*-elf case. * sh-tdep.c (sh_gdbarch_init): Reactivate bfd_mach_sh5 case. * sh64-tdep.c: Rework to replace all deprecated mechanisms with modern methods. * config/sh/embed.mt (TDEPFILES): Add sh64-tdep.o. * config/sh/sh64.mt: Resurrect. 2005-04-15 Kei Sakamoto <sakamoto.kei@renesas.com> * regformats/reg-m32r.dat: New file. 2005-04-14 Daniel Jacobowitz <dan@codesourcery.com> * arm-tdep.c (fp_model_strings): Add terminating NULL. (arm_abi_strings, arm_abi_global, arm_abi_string): New variables. (arm_extract_return_value, arm_store_return_value): Don't use arm_get_fp_model. (arm_get_fp_model, arm_set_fp): Delete. (arm_update_current_architecture): New function. (set_fp_model_sfunc): Call arm_update_current_architecture. (show_fp_model): Update output messages. (arm_set_abi, arm_show_abi): New functions. (arm_elf_osabi_sniffer): Only handle ELFOSABI_ARM. (arm_gdbarch_init): Infer the object's ABI separately from its OSABI. Search for a matching architecture. Honor the global ABI and FPU settings. Set floating point format based on the architecture. (arm_init_abi_eabi_v1, arm_init_abi_eabi_v2, arm_init_abi_apcs): Delete. (_initialize_arm_tdep): Don't call gdbarch_register_osabi. Create "arm set abi" command. * arm-tdep.h (arm_get_fp_model): Delete prototype. (enum arm_abi_kind): New type. (struct gdbarch_tdep): Add arm_abi field. * arm-linux-tdep.c (arm_linux_init_abi): Only override tdep->fp_model if it is ARM_FLOAT_AUTO. * armnbsd-tdep.c (arm_netbsd_aout_init_abi): Likewise. (arm_netbsd_elf_init_abi): Likewise. * defs.h (enum gdb_osabi): Delete ARM-specific OSABIs. * osabi.c (gdb_osabi_name): Likewise. 2005-04-11 Daniel Jacobowitz <dan@codesourcery.com> * config/djgpp/fnchange.lst: Remove entries for gdb.gdbserver. 2005-04-10 Mark Kettenis <kettenis@gnu.org> * rs6000-tdep.c (ppc_supply_fpregset): Increment offset by 8 for floating-point registers. (ppc_collect_fpregset): Likewise. Fix collection of registers. 2005-04-09 Mark Kettenis <kettenis@gnu.org> * ppcobsd-tdep.c: Update copyright year. Include "trad-frame.h" and "tramp-frame.h". (ppcobsd_sigtramp_cache_init): New function. (ppcobsd_sigtramp): New variable. (ppcobsd_init_abi): Prepend signal trampoline unwinder. * Makefile.in (ppcobsd-tdep.o): Update dependencies. 2005-04-08 Andrew Cagney <cagney@gnu.org> * MAINTAINERS (GDB/MI): Andrew Cagney, Elena Zannoni, and Fernando Nasser have decided to step back from GDB/MI. 2005-04-08 Daniel Jacobowitz <dan@codesourcery.com> * config/fnchange.lst: Add testsuite/gdb.gdbserver entries. 2005-04-08 Daniel Jacobowitz <dan@codesourcery.com> * dwarf2-frame.c (struct dwarf2_frame_cache): New field undefined_retaddr. (dwarf2_frame_cache): Initialize undefined_retaddr. (dwarf2_frame_this_id): Return an invalid frame ID if undefined_retaddr. 2005-04-05 Jim Blandy <jimb@redhat.com> Move construction of IA-32 vector types to i386-tdep.c. * gdbtypes.c (build_builtin_type_vec64i, build_builtin_type_vec128i): Delete functions. (builtin_type_vec64i, builtin_type_vec128i): Delete variables. (build_gdbtypes): Don't initialize them. (_initialize_gdbtypes): Don't register GDBARCH swap entries for them. * gdbtypes.h (builtin_type_vec64i, builtin_type_vec128i): Delete declarations. (builtin_type_v2_float, builtin_type_v2_int32, builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v2_double, builtin_type_v4_float, builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16, builtin_type_v16_int8): Add extern declarations. * i386-tdep.c (i386_mmx_type, i386_sse_type): New variables. (i386_build_mmx_type, i386_build_sse_type): New functions. (i386_register_type): Call them, rather than referring to builtin_type_vec64i and builtin_type_vec128i. 2005-04-02 Daniel Jacobowitz <dan@codesourcery.com> * mips-linux-tdep.c (mips_linux_o32_sigframe_init): Adjust big-endian correction code to not offset 32-bit registers. Locate floating point registers correctly. 2005-04-02 Mark Kettenis <kettenis@gnu.org> * main.c: Update copyright year. (captured_main): Avoid using strcpy and strcat. 2005-04-01 Michael Snyder <msnyder@redhat.com> * dummy-frame.c (dummy_frame_sniffer): Optimization: don't bother computing this_id if there are no dummy frames on the stack. * mn10300-tdep.c (mn10300_frame_unwind_cache): Use find_partial_func instead of unwind_pc to identify frame. (mn10300_push_dummy_call): Handle struct args, struct_return. * mn10300-prologue.c (set_movm_offsets): Don't test variable before setting it. * mn10300-tdep.c (mn10300_skip_prologue): Use analyze_prologue instead of skip_prologue_using_sal. 2005-03-31 Kevin Buettner <kevinb@redhat.com> * solib-frv.c (struct lm_info): Add new field ``lm_addr''. (main_lm_addr): New static global. (frv_current_sos): Retain the link map address for each entry. (frv_clear_solib): Clear main_lm_addr. (frv_fetch_objfile_link_map): New function. * frv-tdep.c (frv_gdbarch_init): Register TLS load module fetcher. * frv-tdep.h (frv_fetch_objfile_link_map): Declare. 2005-03-31 Kevin Buettner <kevinb@redhat.com> * gdbarch.sh (fetch_tls_load_module_address): New architecture method. * gdbarch.c, gdbarch.h: Regenerate. * dwarf2loc.c (dwarf_expr_tls_address): Fetch TLS load module address and pass this address, instead of the objfile address, to target_get_thread_local_address(). * linux-thread-db.c (thread_db_get_thread_local_address): Change second parameter from type ``struct objfile *'' to CORE_ADDR. Do not call svr4_fetch_objfile_link_map() to fetch the load module address. * target.h (struct target_ops): Change second parameter of ``to_get_thread_local_address'' from ``struct objfile *'' to ``CORE_ADDR''. * alpha-linux-tdep.c (solib-svr4.h): Include. (alpha_linux_init_abi): Register TLS load module fetcher. * amd64-linux-tdep.c (amd64_linux_init_abi): Likewise. * hppa-linux-tdep.c (hppa_linux_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * ia64-linux-tdep.c (solib-svr4.h): Include. (ia64_linux_init_abi): Register TLS load module fetcher. * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise. * m68klinux-tdep.c (m68k_linux_init_abi): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * s390-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (solib-svr4.h): Include. (sparc64_linux_init_abi): Register TLS load module fetcher. * Makefile.in (alpha-linux-tdep.o, ia64-linux-tdep.o) (sparc-linux-tdep.o): Update dependencies. 2005-03-29 Daniel Jacobowitz <dan@codesourcery.com> * c-valprint.c (c_value_print): Fix up some formatting. Use check_typedef. 2005-03-29 Daniel Jacobowitz <dan@codesourcery.com> * arm-linux-nat.c (store_register, store_regs): Handle ARM_PS_REGNUM. 2005-03-29 Daniel Jacobowitz <dan@codesourcery.com> * arm-linux-tdep.c (arm_linux_thumb_be_breakpoint) (arm_linux_thumb_le_breakpoint): New. Update comments. (arm_linux_init_abi): Set Thumb breakpoints also. 2005-03-29 Daniel Jacobowitz <dan@codesourcery.com> * Makefile.in (arm-tdep.o): Update dependencies. * arm-tdep.c: Include "objfiles.h" and "dwarf2-frame.h". (arm_gdbarch_init): Register dwarf2_frame_sniffer. 2005-03-28 Joel Brobecker <brobecker@adacore.com> * irix5-nat.c (supply_fpregset): Fix bug that caused the FSR register value to be incorrectly written in the regcache. (fill_fpregset): Fix bug that caused the FSR register value to be incorrectly read from the regcache. 2005-03-28 Daniel Jacobowitz <dan@codesourcery.com> * remote-rdi.c (arm_rdi_insert_breakpoint): Don't call arm_pc_is_thumb_dummy. 2005-03-28 Mark Kettenis <kettenis@gnu.org> * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Handle StackGhost. * sparc-tdep.c (sparc_supply_rwindow, sparc_collect_rwindow): Handle StackGhost in 64-bit code. * sparc64-tdep.c (sparc64_frame_prev_register): Handle StackGhost. 2005-03-27 Christopher Faylor <cgf@timesys.com> * win32-nat.c (handle_exception): Treat win32 routines which check for valid addresses as "special" and don't stop when a SEGV is detected. (get_child_debug_event): Properly flag exception as unhandled. 2005-03-26 Daniel Jacobowitz <dan@codesourcery.com> * cp-support.c (cp_class_name_from_physname): Rewrite. (unqualified_name_from_comp): New function, broken out from method_name_from_physname. Correct handling for typed names and templates. (method_name_from_physname): Use unqualified_name_from_comp. (cp_func_name, remove_params): Move earlier in the file. Add better comments. Use the component tree to parse the name. (_initialize_cp_support): Remove stray whitespace. 2005-03-26 Mark Kettenis <kettenis@gnu.org> * exec.c (bfdsec_to_vmap): Use strcmp instead of DEPRECATED_STREQ. * inflow.h: Update copyright year. Remove #ifdef SHORT_PGRP code. Callapse HAVE_TERMIO and HAVE_SGTTY. * dwarf2-frame.c (execute_cfa_program): Implement DW_CFA_GNU_window_save. 2005-03-25 Mark Kettenis <kettenis@gnu.org> * config/sparc/nbsd64.mh (NAT_FILE): Remove. * config/i386/obsd64.mt (TDEPFILES): Add obsd-uthread.o. 2005-03-25 Daniel Jacobowitz <dan@codesourcery.com> * arm-tdep.c (target_is_thumb, caller_is_thumb) (arm_pc_is_thumb_dummy): Remove. (arm_breakpoint_from_pc): Don't call arm_pc_is_thumb_dummy. 2005-03-25 Anthony Green <green@redhat.com> * remote.c (remote_store_registers): Fix memset usage. * std-regs.c (value_of_builtin_frame_reg): Ditto. (value_of_builtin_frame_fp_reg): Ditto. (value_of_builtin_frame_reg): Ditto. 2005-03-25 Mark Mitchell <mark@codesourcery.com> * ser-base.c (ser_unix_write): Rename to ... (ser_base_write): ... this. (ser_unix_nop_flush_output): Rename to ... (ser_base_flush_output): ... this. (ser_unix_flush_input): Rename to ... (ser_base_flush_input): ... this. (ser_unix_nop_send_break): Rename to ... (ser_base_send_break): ... this. (ser_unix_nop_drain_output): Rename to ... (ser_base_drain_output): ... this. (ser_unix_nop_raw): Rename to ... (ser_base_raw): ... this. (ser_unix_nop_get_tty_state): Rename to ... (ser_base_set_tty_state): ... this. (ser_unix_nop_noflush_set_tty_state): Rename to ... (ser_base_noflush_set_tty_state): ... this. (ser_unix_nop_print_tty_state): Rename to ... (ser_base_print_tty_state): ... this. (ser_unix_nop_setbaudrate): Rename to ... (ser_base_setbaudrate): ... this. (ser_unix_nop_setstopbits): Rename to ... (ser_base_setstopbits): ... this. (ser_unix_async): Rename to ... (ser_base_async): ... this. * ser-base.h (ser_unix_write): Rename to ... (ser_base_write): ... this. (ser_unix_nop_flush_output): Rename to ... (ser_base_flush_output): ... this. (ser_unix_flush_input): Rename to ... (ser_base_flush_input): ... this. (ser_unix_nop_send_break): Rename to ... (ser_base_send_break): ... this. (ser_unix_nop_drain_output): Rename to ... (ser_base_drain_output): ... this. (ser_unix_nop_raw): Rename to ... (ser_base_raw): ... this. (ser_unix_nop_get_tty_state): Rename to ... (ser_base_set_tty_state): ... this. (ser_unix_nop_noflush_set_tty_state): Rename to ... (ser_base_noflush_set_tty_state): ... this. (ser_unix_nop_print_tty_state): Rename to ... (ser_base_print_tty_state): ... this. (ser_unix_nop_setbaudrate): Rename to ... (ser_base_setbaudrate): ... this. (ser_unix_nop_setstopbits): Rename to ... (ser_base_setstopbits): ... this. (ser_unix_async): Rename to ... (ser_base_async): ... this. * ser-pipe.c (_initialize_ser_pipe): Update accordingly. * ser-tcp.c (_initialize_ser_tcp): Likewise. * ser-unix.c (hardwire_flush_input): Likewise. (_initializer_ser_hardwire): Likewise. * Makefile.in (SFILES): Add ser-base.c. (ser_base_h): New variable. (ser-base.o): New target. (ser-pipe.o): Depend on $(ser_base_h). (ser-tcp.o): Likewise. (ser-unix.o): Likewise. Do not depend on $(event_loop_h). * configure.ac (SER_HARDWIRE): Include ser-base.o where appropriate. * ser-base.c: New file. (push_event): Move from ser-unix.c. (fd_event): Likewise. (reschedule): Likewise. (ser_unix_write): Likewise. (ser_unix_nop_flush_output): Likewise. (ser_unix_flush_input): Likewise. (ser_unix_nop_send_break): Likewise. (ser_unix_nop_drain_output): Likewise. (ser_unix_nop_raw): Likewise. (ser_unix_nop_get_tty_state): Likewise. (ser_unix_nop_set_tty_state): Likewise. (ser_unix_nop_noflush_set_tty_state): Likewise. (ser_unix_nop_print_tty_state): Likewise. (ser_unix_nop_setbaudrate): Likewise. (ser_unix_nop_setstopbits): Likewise. (ser_unix_async): Likewise. * ser-base.h: New file. * ser-pipe.c (ser-base.h): Include it. * ser-tcp.c (ser-base.h): Likewise. * ser-unix.h (ser_unix_nop_flush_output): Remove. (ser_unix_flush_input): Likewise. (ser_unix_nop_send_break): Likewise. (ser_unix_nop_raw): Likewise. (ser_unix_nop_get_tty_state): Likewise. (ser_unix_nop_set_tty_state): Likewise. (ser_unix_nop_print_tty_state): Likewise. (ser_unix_nop_noflush_set_tty_state): Likewise. (ser_unix_nop_setbaudrate): Likewise. (ser_unix_nop_setstopbits): Likewise. (ser_unix_nop_drain_output): Likewise. (ser_unix_wait_for): Likewise. (ser_unix_write): Likewise. (ser_unix_async): Likewise. * ser-unix.c (event-loop.h): Do not include it. (push_event): Move to ser-base.c. (fd_event): Likewise. (reschedule): Likewise. (ser_unix_write): Likewise. (ser_unix_nop_flush_output): Likewise. (ser_unix_flush_input): Likewise. (ser_unix_nop_send_break): Likewise. (ser_unix_nop_drain_output): Likewise. (ser_unix_nop_raw): Likewise. (ser_unix_nop_get_tty_state): Likewise. (ser_unix_nop_set_tty_state): Likewise. (ser_unix_nop_noflush_set_tty_state): Likewise. (ser_unix_nop_print_tty_state): Likewise. (ser_unix_nop_setbaudrate): Likewise. (ser_unix_nop_setstopbits): Likewise. (ser_unix_async): Likewise. (ser_unix_wait_for): Make it static. * configure: Regenerated. 2005-03-25 Mark Kettenis <kettenis@gnu.org> * dwarf2-frame.h: Update copyrigh year. (enum dwarf2_frame_reg_rule): Add DWARF2_FRAME_REG_RA_OFFSET. * dwarf2-frame.c: Update copyright year. (struct dwarf2_frame_cache): Add member `retaddr_reg'. (dwarf2_frame_cache): Deal with DWARF2_FRAME_REG_RA_OFFSET. (dwarf2_frame_prev_register): Handle DWARF2_FRAME_REG_RA_OFFSET. 2005-03-23 Martin Hunt <hunt@redhat.com> * configure.ac: Remove -fwritable-strings from CFLAGS. * configure: Regenerate. 2005-03-21 Michael Snyder <msnyder@redhat.com> * mn10300-prologue.c (fix_frame_pointer): Delete. (set_movm_offsets) Don't return just because movm_args is zero -- still need to save pc and sp in saved_regs. (mn10300_analyze_prologue): Don't return prematurely without calling set_movm_offsets (for pc and sp at minimum). 2005-03-21 Mark Mitchell <mark@codesourcery.com> * configure.ac (stat.st_blksize): Check for it. (getuid): Likewise. (getgid): Likewise. * configure: Regenerated. * config.in: Likewise. * remote-fileio.c (remote_fileio_to_fio_stat): Check HAVE_STRUCT_STAT_ST_BLKSIZE. 2005-03-21 Christopher Faylor <cgf@timesys.com> * win32-nat.c (do_initial_child_stuff): Don't clear the thread list here. (do_initial_child_stuff): Move clearing of thread list to a place before a thread ould be created. (child_attach): Ditto. 2005-03-21 Michael Snyder <msnyder@redhat.com> * mn10300-tdep.c (mn10300_frame_unwind_cache): Use func addr instead of pc addr for frame_id. Otherwise "until" won't work. 2005-03-21 Kevin Buettner <kevinb@redhat.com> * frv-linux-tdep.c (frv_linux_sigcontext_reg_addr): Fix typo in comment. 2005-03-20 Mark Kettenis <kettenis@gnu.org> * dwarf2loc.c (dwarf_expr_tls_address): Mark addr as volatile. * varobj.c (my_value_equal): Mark val2 as volatile. * cp-names.y: Add prototype for yyparse. 2005-03-19 Daniel Jacobowitz <dan@codesourcery.com> * dwarf2loc.c (dwarf_expr_tls_address): Initialize ADDR. * gnu-v3-abi.c (gnuv3_baseclass_offset): Update type of VALADDR. 2005-03-18 Kevin Buettner <kevinb@redhat.com> * Makefile.in (dwarf2loc.o, linux-thread-db.o): Add dependencies. * exceptions.h (TLS_NO_LIBRARY_SUPPORT_ERROR, TLS_GENERIC_ERROR) (TLS_LOAD_MODULE_NOT_FOUND_ERROR, TLS_NOT_ALLOCATED_YET_ERROR): New error/exception enums. * dwarf2loc.c (exceptions.h): Include. (dwarf_expr_tls_address): Invoke target_get_thread_local_address() via TRY_CATCH mechanism. Print error messages for TLS related exceptions. * linux-thread-db.c (thread_db_get_thread_local_address): Throw exceptions instead of printing errors. 2005-03-18 Mark Kettenis <kettenis@gnu.org> * utils.c (safe_strerror): Use xsnprintf instead of sprintf. (decimal2str, octal2str): Change to return a string allocated by get_cell. Use xsnprint instead of snprintf. (paddr_u, paddr_d): Adjust for changed calling convention of decimal2str. (phex, phex_nz, hex_string): Use xsnprintf instead of snprintf. (int_string): Likewise. Adjust for changed calling convention of decimal2str and octal2str. 2005-03-18 Kevin Buettner <kevinb@redhat.com> * frv-linux-tdep.c (frv_linux_sigcontext_reg_addr): Update comments. Adjust incorrectly computed constant for realtime signal frame. 2005-03-18 Mark Kettenis <kettenis@gnu.org> From Ralf Corsepius <ralf.corsepius@rtems.org> * configure.tgt: Add m68*-*-rtems*. 2005-03-17 Mark Kettenis <kettenis@gnu.org> * defs.h (xsnprintf): New prototype. * utils.c (xsnprintf): New function. * corelow.c (get_core_register_section): Replace usage of sprintf and strcpy with xstrprintf and xstrdup. * mips-tdep.c (mips_single_step_through_delay): Put back check for breakpoint lost with the introduction of this function. 2005-03-17 Paul Brook <paul@codesourcery.com> * amd64-tdep.c (amd64_dwarf_reg_to_regnum): Fix broken logic. * s390-tdep.c (s390_dwarf_reg_to_regnum): Ditto. 2005-03-16 Mark Mitchell <mark@codesourcery.com> * event-top.c (handle_sigquit): Do not define for systems without SIGQUIT. (sigquit_token): Likewise. (async_init_signals): Allow for systems that do not define SIGQUIT. * ser-tcp.c (net_open): Allow for systems that do not have SIGPIPE. 2005-03-15 Mark Mitchell <mark@codesourcery.com> * utils.c (internal_vproblem): Guard call to fork with HAVE_WORKING_FORK. * cli/cli-cmds.c (shell_escape): Guard call to vfork with HAVE_WORKING_VFORK and HAVE_WORKING_FORK. * remote-fileo.c (remote_fileio_mode_to_host): Accomodate lack of S_IRGRP and related macros. (remote_fileio_mode_to_target): Likewise. 2005-03-14 Ben Elliston <bje@au.ibm.com> * Makefile.in (CLIBS): Link libbfd after libopcodes, as it is a more primitive library. 2005-03-13 Mark Kettenis <kettenis@gnu.org> * inf-ttrace.c (inf_ttrace_pid_to_str): Use snprintf instead of sprintf. * target.c (normal_pid_to_str): Likewise. * remote.c (remote_pid_to_str): Use snprint instead of sprintf. Change capitalization of "thread". Use ptid_get_pid instead of GETPID. * cp-abi.c (set_cp_abi_as_auto_default): Use xasprintf instead of a combination of xmalloc and sprintf. 2005-03-13 Jim Blandy <jimb@redhat.com> * configure.ac: Use '=', not '=='; the latter is a GNU extension. * configure: Regenerated. 2005-03-11 Michael Snyder <msnyder@redhat.com> * mn10300-tdep.c (mn10300_dummy_unwind_dummy_id): Replace stub fn with real implementatin mn10300_unwind_dummy_id. (mn10300_push_dummy_call): Implement. Bare bones version, does not handle structs or floats. 2005-03-11 Jim Blandy <jimb@redhat.com> Avoid warnings due to the use of -Wuninitialized without -O. * configure.ac (build_warnings): Include -Wuninitialized only if CFLAGS is unset at configure time, or CFLAGS is set and includes some -O option other than -O0. * configure: Regenerated. * mips-tdep.c (show_mips_abi): Change calling conventions to match those expected by add_setshow_enum_cmd. Use 'file' argument as appropriate. 2005-03-10 Daniel Jacobowitz <dan@codesourcery.com> * Makefile.in (SFILES): Add cp-names.y. (libiberty_h, safe_ctype_h): New. (YYFILES): Add cp-names.c. (YYOBJ): Add cp-names.o. (test-cp-names.o, test-cp-names$(EXEEXT), cp-names.o): New rules. (clean): Remove test-cp-names$(EXEEXT). (local-maintainer-clean): Remove cp-names.c. * cp-names.y: New file. * cp-support.c (find_last_component): Delete. (d_left, d_right): Define. (cp_canonicalize_string, mangled_name_to_comp): New functions. (cp_class_name_from_physname, method_name_from_physname): Rewrite to use mangled_name_to_comp. * cp-support.h (cp_canonicalize_string, cp_demangled_name_to_comp) (cp_comp_to_string): New prototypes. * config/djgpp/fnchange.lst: Add cp-names.c. 2005-03-10 Bob Rossi <bob@brasko.net> * main.c (print_gdb_help): Remove the --[no]async help message. 2005-03-10 Mark Kettenis <kettenis@gnu.org> * proc-api.c: Update copyright year. (_initialize_proc_api): Revert previous patch, removing spurious space instead. 2005-03-09 Joel Brobecker <brobecker@adacore.com> * regcache.c: Fix typo in comment. 2005-03-09 David Lecomber <david@lecomber.net> * proc-api.c (_initialize_proc_api): Fix invalid multi-line i18n text. 2005-03-09 Mark Kettenis <kettenis@gnu.org> * sparc-tdep.c (sparc_frame_cache): Adjust cached frame base address for 64-bit code. (sparc_unwind_dummy_id): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Adjust for new frame base address convention. (sparc64_push_dummy_call): Likewise. * sparc64nbsd-tdep.c: Update copyright year. (sparc64nbsd_sigcontext_frame_cache): Adjust cached frame base address for 64-bit code. (sparc64nbsd_init_abi): Tweak comment. * sparc64obsd-tdep.c: Update copyright year. (sparc64obsd_frame_cache): Adjust cached frame base address for 64-bit code. (sparc64obsd_init_abi): Tweak comment. 2005-03-09 Corinna Vinschen <vinschen@redhat.com> * exceptions.h (TRY_CATCH): Define setjmp/sigsetjmp macro safe. 2005-03-09 Joel Brobecker <brobecker@adacore.com> * dwarf2read.c (dwarf_decode_lines): Use the complete filename when creating include psymtabs. 2005-03-08 Mark Mitchell <mark@codesourcery.com> * environ.h (struct environ): Rename to ... (struct gdb_environ): ... this. (make_environ): Update prototype. (free_environ): Likewise. (init_environ): Likewise. (get_in_environ): Likewise. (set_in_environ): Likewise. (unset_in_environ): Likewise. (environ_vector): Likewise. * environ.c (make_environ): Replace "struct environ" with "struct gdb_environ". (free_environ): Likewise. (init_environ): Likewise. (environ_vector): Likewise. (get_in_environ): Likewise. (set_in_environ): Likewise. (unset_in_environ): Likewise. * infcmd.c (inferior_environ): Likewise. * inferior.h (inferior_environ): Likewise. 2005-03-08 Joel Brobecker <brobecker@adacore.com> * infcmd.c (run_command_1): New function, extracted from run_command. (run_command): Replace implementation by call to run_command_1. (start_command): Use run_command_1 to insert the temporary breakpoint and run the program. Remove code that's no longer needed, as already done at the proper time by run_command_1. 2005-03-08 Daniel Jacobowitz <dan@codesourcery.com> * symfile.c (clear_symtab_users): Call clear_current_source_symtab_and_line first. 2005-03-08 Nathan Sidwell <nathan@codesourcery.com> * ax-gdb.c (gen_expr): Add UNOP_PLUS case. * c-exp.y (exp): Add unary plus. * eval.c (evaluate_subexp_standard): Add UNOP_PLUS case. * valarith.c (value_x_unop): Add UNOP_PLUS case. (value_pos): New. * value.h (value_pos): Declare. * remote.c (MIN_REMOTE_PACKET_SIZE): Set to 20. (remote_fetch_registers): Allow uppercase hex when resyncing. (remote_write_bytes): Only call get_memory_write_packet_size once. Robustify packet size calculation for very small packets. Check that at least one byte will be written. * tracepoint.c (target_is_remote): Allow extended-remote. (struct collection_list): Allow 256 registers, like the comment said. (add_memrange): Fix comment. (read_actions): Turn EOF into 'end'. 2005-03-08 Corinna Vinschen <vinschen@redhat.com> * Makefile.in: Add dependencies for iq2000-tdep.o. * configure.tgt: Add iq2000-*-* target. * iq2000-tdep.c: New file. * config/iq2000/iq2000.mt: New file. 2005-03-07 Joel Brobecker <brobecker@adacore.com> * doc/observer.texi (executable_changed): New observer. * symtab.c: Include "observer.h". (find_main_name): New function. (main_name): If name_of_main is unset, then compute it using find_main_name. (symtab_observer_executable_changed): New function. (_initialize_symtab): Attach executable_changed observer. * exec.c: Include "observer.h". (exec_file_attach): Emit executable_changed notification. * symfile.c: Include "observer.h". (reread_symbols): Send an executable_changed if appropriate. * Makefile.in (exec.o): Add dependency on observer.h. (symfile.o): Likewise. (symtab.o): Likewise. 2005-03-07 Daniel Jacobowitz <dan@codesourcery.com> * findvar.c (read_var_value): Don't allocate V when it will not be used. Add missing break for LOC_INDIRECT. 2005-03-06 Mark Kettenis <kettenis@gnu.org> * sparc64fbsd-tdep.c: Include "solib-svr4.h". (sparc64fbsd_init_abi): Set skip_trampoline_code and solib_svr4_fetch_link_map_offsets. * Makefile.in (sparc64fbsd-tdep.o): Update dependencies. 2005-03-06 Daniel Jacobowitz <dan@codesourcery.com> * linux-nat.c (child_follow_fork): Call target_terminal_ours before printing output. Use fprintf_unfiltered. Only print output when debugging. 2005-03-05 Mark Kettenis <kettenis@gnu.org> * sparc64-tdep.c (sparc64_store_floating_fields): Constify third argument. (sparc64_store_arguments): Constify. 2005-03-05 Mark Kettenis <kettenis@gnu.org> * alphabsd-nat.c: Update copyright year. Include "inf-ptrace.h". (alphabsd_fetch_inferior_registers): Rename from fetch_inferior_registers. Make static. (alphabsd_store_inferior_registers): Rename from store_inferior_registers. Make static. (_initialize_alphabsd_nat): New function. * Makefile.in (alphabsd-nat.o): Update dependencies. * config/alpha/fbsd.mh (NATDEPFILES): Remove infptrace.o and inftarg.o. Add inf-ptrace.o, fbsd-nat.o and gcore.o. * config/alpha/nbsd.mh (NAT_CLIBS): Remove variable. (NATDEPFILES): Remove infptrace.o and inftarg.o. Add alphabsd-nat.o. * config/alpha/nm-fbsd.h: Update copyright year. Don't include "config/nm-bsd.h" and "elf/common.h". * config/alpha/nm-nbsd.h: Update copyright year. Don't include "config/nm-nbsd.h". * mips64obsd-tdep.c (mips64obsd_init_abi): Don't set software_single_step. 2005-03-04 Michael Snyder <msnyder@redhat.com> * mn10300-prologue.c: New file. Prologue analysis. * mn10300-tdep.c: Move REGNUM values to mn10300-tdep.h. (mn10300_frame_unwind_cache): Don't call trad_frame_set_id until after analyze_prologue, and don't call trad_frame_set_base at all (let analyze_prologue do it). 2005-03-04 Michael Snyder <msnyder@redhat.com> * trad-frame.c (trad_frame_set_reg_value): New function. * trad-frame.h (trad_frame_set_reg_value): Export. 2005-03-04 Daniel Jacobowitz <dan@codesourcery.com> * Makefile.in (remote.o): Update dependencies. * remote.c: Include "observer.h". 2005-03-04 Daniel Jacobowitz <dan@codesourcery.com> * target.c (target_read_memory_partial): Always initialize ERR. (target_write_memory_partial): Likewise. 2005-03-03 Daniel Jacobowitz <dan@codesourcery.com> * remote.c (remote_open_1): Call observer_notify_inferior_created. 2005-03-03 Daniel Jacobowitz <dan@codesourcery.com> * arm-tdep.c (arm_make_stub_cache, arm_stub_this_id) (arm_stub_unwind, arm_stub_unwind_sniffer): New. (arm_gdbarch_init): Add arm_stub_unwind_sniffer. 2005-03-02 Daniel Jacobowitz <dan@codesourcery.com> * linux-nat.c (linux_supports_tracevforkdone, child_follow_fork): Use LWP IDs. 2005-02-28 Daniel Jacobowitz <dan@codesourcery.com> * dwarf2loc.c (loclist_read_variable): Set optimized_out instead of reporting an error. * valprint.c (value_check_printable): New function. (common_val_print): New function. Use value_check_printable. (value_print): Use value_check_printable. * value.h (common_val_print): Add prototype. * c-valprint.c (c_val_print): Use common_val_print. * cp-valprint.c (cp_print_value_fields): Likewise. (cp_print_hpacc_virtual_table_entries): Likewise. * f-valprint.c (f_val_print): Likewise. * jv-valprint.c (java_value_print, java_print_value_fields): Likewise. * scm-valprint.c (scm_value_print): Likewise. * stack.c (print_frame_args): Likewise. * varobj.c (c_value_of_variable): Likewise. * p-valprint.c (pascal_val_print, pascal_value_print): Likewise. (pascal_object_print_value_fields): Likewise. Update call to pascal_object_print_static_field. (pascal_object_print_static_field): Remove TYPE argument. Use common_val_print. 2005-02-25 Mark Kettenis <kettenis@gnu.org> Committed by Elena Zannoni <ezannoni@redhat.com> * dwarf2read.c (dwarf2_build_psymtabs_hard): Adjust info_ptr before building psymtabs for included files. (create_all_comp_units): Initailize initial length size of compilation header to zero. (read_initial_length): Complain if both 32-bit and 64-bit DWARF sections are encountered within the same compilation header. (dwarf_decode_line_header): Pass compilation header in call to read_initial_length. 2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto. 2005-02-23 Jim Blandy <jimb@redhat.com> * disasm.c (gdb_disassemble_info): Call disassemble_init_for_target. 2005-02-23 Andrew Cagney <cagney@gnu.org> * cli/cli-dump.c (dump_bfd_file): Replace magic constant with SEC_XXX flags. 2005-02-22 Andrew Cagney <cagney@gnu.org> * configure.ac: Only enaable insight when itcl is present. * configure: Re-generate. 2005-02-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> Committed by Andrew Cagney. * infptrace.c (store_register): Fix typo. 2005-02-21 Andrew Cagney <cagney@gnu.org> * command.h (deprecated_add_set_cmd): Rename add_set_cmd. * cli/cli-decode.h (add_set_cmd): Delete declaration. * cli/cli-decode.c (deprecated_add_set_cmd): Rename add_set_cmd. * i386-nat.c (_initialize_i386_nat): Update call. * valprint.c (_initialize_valprint): Update comment. * gnu-nat.c (_initialize_gnu_nat): Update call. 2005-02-21 Alan Modra <amodra@bigpond.net.au> * elfread.c (elf_symtab_read): Discard section syms. 2005-02-21 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_set_enum_cmd): Delete function. (deprecated_add_show_from_set): Delete function. * command.h (add_set_enum_cmd): Delete declaration. (deprecated_add_show_from_set): Delete declaration. * cli/cli-decode.h (add_set_enum_cmd): Delete declaration. (deprecated_add_show_from_set): Delete declaration. * arm-tdep.c (_initialize_arm_tdep): Update comment. * kod.c (kod_set_os): Simplify. * infrun.c (set_schedlock_func): Simplify. * cli/cli-dump.c (add_dump_command): Update comment. Replace string variables with a filename completer with add_setshow_optional_filename_cmd. * solib.c, symfile.c: Update. * cli/cli-setshow.c: Do not tidle expand the file. Add more uses of add_setshow_string_cmd, add_setshow_integer_cmd, and add_setshow_string_noescape_cmd. * cli/cli-setshow.c (deprecated_show_value_hack): Do not print a NULL command's value. * kod.c, language.c, ocd.c, remote-e7000.c, remote-mips.c: Update. * remote-sds.c, remote.c, symfile.c, top.c: Update. 2005-02-20 Andrew Cagney <cagney@gnu.org> Use add_setshow_enum_cmd through out. * arch-utils.c, charset.c, demangle.c, i386-tdep.c: Update. * infrun.c, mips-tdep.c, osabi.c, serial.c, tui/tui-win.c: Update. * mi/mi-main.c (captured_mi_execute_command): Use mi_cmd_interpreter_exec. * cli/cli-decode.c (add_setshow_optional_filename_cmd): New function. * cli/cli-setshow.c (deprecated_show_value_hack) (do_setshow_command): Handle var_optional_filename. * command.h (enum var_types): Add var_optional_filename. (add_setshow_optional_filename_cmd): Declare. * infcmd.c (notice_args_read): Use. * symfile-mem.c (symbol_file_add_from_memory): Pass target_read_memory to bfd_elf_bfd_from_remote_memory. (do_target_read_memory): Delete. 2005-02-16 Mark Kettenis <kettenis@gnu.org> * value.h (value_contents_equal): New prototype. * value.c (value_contents_equal): New function. * varobj.c: Include "exceptions.h" and "gdb_assert.h". Don't include <math.h>. (varobj_set_value): Initialize error to zero. (varobj_update): Rename error2 to error and initialize it to zero. Slightly change the wording of some comments. (my_value_equal): Reimplement using TRY_CATCH and value_contents_equal. 2005-02-18 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_integer_cmd): New function. * command.h (add_setshow_integer_cmd): Declare. * cli/cli-cmds.c: Update. Use add_setshow_uinteger_cmd through out. * printcmd.c, source.c, utils.c, valprint.c: Update. Use add_setshow_zinteger_cmd through out. Re-sync gdbarch.sh and gdbarch.c. * breakpoint.c, frame.c, gdb-events.sh, gdbarch.sh: Update. * gdbtypes.c, infrun.c, linux-nat.c, maint.c, monitor.c: Update. * pa64solib.c, parse.c, remote-mips.c, ser-go32.c: Update. * serial.c, solib-frv.c, somsolib.c, target.c, top.c: Update. * varobj.c, cli/cli-cmds.c: Update. * gdbarch.c, gdb-events.c: Regenerate. Use add_setshow_boolean_command through out. Delete #ifdef 0'ed code adding set/show boolean commands. * cp-valprint.c, dcache.c, exec.c, gdbtypes.c, infrun.c: Update. * monitor.c, p-valprint.c, pa64solib.c, printcmd.c: Update. * proc-api.c, remote-mips.c, remote.c, solib.c: Update. * somsolib.c, symfile.c, top.c, utils.c, valops.c: Update. * valprint.c, win32-nat.c, wince.c, xcoffsolib.c: Update. * cli/cli-cmds.c: Update. 2005-02-17 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_filename_cmd): Set the completer to filename_completer. * solib.c (_initialize_solib, reload_shared_libraries): Use add_setshow_filename_cmd. * serial.c (_initialize_serial): Ditto. * remote-utils.c (_initialize_sr_support): Ditto. * cli/cli-decode.c (add_setshow_string_noescape_cmd): New function. * command.h (add_setshow_string_noescape_cmd): Declare. * wince.c (_initialize_wince): Use. * symfile.c (_initialize_symfile): Use. (set_ext_lang_command): Update declaration. * corefile.c (_initialize_core): Use. * cli/cli-decode.c (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete fprint_setshow parameter. * command.h (fprint_setshow_ftype): Delete. (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete fprint_setshow parameter. * aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update. * complaints.c, cris-tdep.c, dwarf2read.c, frame.c: Update. * hppa-tdep.c, infcall.c, m32r-rom.c, maint.c: Update. * mips-tdep.c, nto-tdep.c, observer.c, remote-rdi.c: Update * remote.c, target.c, cli/cli-logging.c: Update. 2005-02-16 Andrew Cagney <cagney@gnu.org> Merge setshow print and show parameters. * command.h (show_value_ftype): Define. (deprecated_show_value_hack): Declare. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_uinteger_cmd) (add_setshow_zinteger_cmd): Change type of show_func to show_value_ftype. * cli/cli-decode.h (struct cmd_list_element): Replace fprint_setshow with show_value_func. * cli/cli-decode.c (add_setshow_cmd_full): Update show_func parameter. Set show_value_func. Do not set cmd_sfunc. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_uinteger_cmd) (add_setshow_zinteger_cmd): Update. * complaints.c (complaints_show_value): Replace fprint_setshow_complaints. (_initialize_complaints): Update. * mips-tdep.c (show_mask_address): Update. * arm-tdep.c (show_fp_model): Update. * cli/cli-setshow.c (do_setshow_command): Call show_value_func instead of fprint_setshow. Use deprecated_show_value_hack. (deprecated_show_value_hack): New function. * remote.c (add_packet_config_cmd, show_remote_cmd): (show_remote_protocol_P_packet_cmd) (show_remote_protocol_P_packet_cmd) (show_remote_protocol_Z_access_wp_packet_cmd) (show_remote_protocol_Z_hardware_bp_packet_cmd) (show_remote_protocol_Z_packet_cmd) (show_remote_protocol_Z_read_wp_packet_cmd) (show_remote_protocol_Z_software_bp_packet_cmd) (show_remote_protocol_Z_write_wp_packet_cmd) (show_remote_protocol_binary_download_cmd) (show_remote_protocol_p_packet_cmd) (show_remote_protocol_qPart_auxv_packet_cmd) (show_remote_protocol_qSymbol_packet_cmd) (show_remote_protocol_vcont_packet_cmd): Update. 2005-02-16 Mark Kettenis <kettenis@gnu.org> * wrapper.h: Update copyright year. Properly wrap a few prototypes. (struct gdb_wrapper_arguments): Remove forward declaration. * wrapper.c: Update copyright year. Include "ui-out.h". (struct gdb_wrapper_arguments): Remove. (struct captured_value_struct_elt_args): Remove. (wrapper_parse_exp_1, wrap_evaluate_expression) (wrap_value_fetch_lazy, wrap_value_equal, wrap_value_assign) (wrap_value_subscript, wrap_value_ind, wrap_parse_and_eval_type) (do_captured_value_struct_elf): Remove functions. (gdb_parse_exp_1, gdb_evaluate_expression, gdb_value_fetch_lazy) (gdb_value_equal, gdb_value_assign, gdb_value_subscript) (gdb_value_ind, gdb_parse_and_eval_type, gdb_value_struct_elt): Re-implement using TRY_CATCH. 2005-02-16 Yoshinori Sato <ysato@users.sourceforge.jp> * remote-e7000.c: unuse TM_FILE defined macro. (e7000_fetch_registers) (e7000_store_registers) (e7000_wait): delete NUM_REALREGS. * remote-hms.c: move TM_FILE macro. (CCR_REGNO): move define from tm-h8300.h. 2005-02-15 Mark Kettenis <kettenis@gnu.org> * amd64-linux-tdep.c: Update copyright year. (amd64_linux_sigtramp_start): Use sizeof operator instead of LINUX_SIGTRAMP_LEN. 2004-02-15 Joel Brobecker <brobecker@gnat.com> From Paul Hilfinger <hilfinger@gnat.com> * dwarf2read.c (new_symbol): Use SYMBOL_SEARCH_NAME rather than SYMBOL_NATURAL_NAME to set type names. 2005-02-15 Andrew Cagney <cagney@gnu.org> Mark up add_com, add_info and add_prefix_cmd. * breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update. * exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update. * go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update. * maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update. * ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update. * remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update. * remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update. * remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update. * sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update. * symfile.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, typeprint.c, utils.c, valprint.c: Update. * win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update. * cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update. * tui/tui-stack.c, tui/tui-win.c: Update. 2005-02-14 Andrew Cagney <cagney@gnu.org> * config/h8300/h8300.mt (DEPRECATED_TM_FILE): Delete. * config/h8300/tm-h8300.h: Delete file. Mark up add_cmd. * arch-utils.c, avr-tdep.c, breakpoint.c, corefile.c: Update. * cp-abi.c, cp-namespace.c, cp-support.c, dummy-frame.c: Update. * exec.c, gnu-nat.c, go32-nat.c, hppa-tdep.c, infcmd.c: Update. * infrun.c, interps.c, macrocmd.c, maint.c, memattr.c: Update. * mips-tdep.c, ocd.c, osabi.c, printcmd.c, regcache.c: Update. * reggroups.c, remote-fileio.c, remote-rdi.c, remote.c: Update. * sol-thread.c, source.c, stack.c, symfile-mem.c: Update. * symfile.c, thread.c, tracepoint.c, valprint.c, value.c: Update. * win32-nat.c, cli/cli-cmds.c, cli/cli-dump.c: Update. * cli/cli-logging.c, tui/tui-regs.c: Update. Mark up add_setshow functions, replace "PRINT:" comment prefix with "FIXME: i18n:". * aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update. * cris-tdep.c, dwarf2read.c, frame.c, hppa-tdep.c: Update. * infcall.c, m32r-rom.c, maint.c, mips-tdep.c: Update. * nto-tdep.c, observer.c, remote-rdi.c, remote.c: Update. * target.c, cli/cli-logging.c: Update. * utils.c (paddress): New function. * defs.h (paddress): Declare. * printcmd.c (deprecated_print_address_numeric): Rename print_address_numeric, call paddress. * valprint.c, ui-out.c, tui/tui-stack.c, tracepoint.c: Update. * symmisc.c, symfile.c stack.c, p-valprint.c, printcmd.c: Update. * maint.c, m32r-rom.c, infcmd.c, f-valprint.c, exec.c: Update. * dwarf2read.c, dve3900-rom.c, defs.h, c-valprint.c: Update. * corefile.c, cli/cli-cmds.c, breakpoint.c, annotate.c: Update. * ada-valprint.c: Update. 2005-02-13 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com> * MAINTAINERS: Add myself to "Write After Approval". 2005-02-12 Yoshinori Sato <ysato@users.sourceforge.jp> Restore h8300 support. * configure.tgt: Add h8300-*-* * h8300-tdep.c: New file. Rewrite new frame code. * config/h8300/h8300.mt: New file. Restored Rev 1.3 * config/h8300/tm-h8300.h: New file. Restored Rev 1.21 * MAINTAINERS: Add myself to "Write After Approval". 2005-02-11 Andrew Cagney <cagney@gnu.org> Mark up some of printf_filtered and printf_unfiltered. * ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update. * corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update. * demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update. * event-loop.c, event-top.c, exec.c, f-valprint.c: Update. * gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update. * infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update. * mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update. * ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update. * remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update. * stack.c, symfile.c, symmisc.c, target.c, thread.c: Update. * top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update. * cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update. * tui/tui-regs.c, tui/tui-win.c: Update. Mark up error_no_arg, query, perror_with_name, complaint, and internal_error. * breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update. * cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update. * dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update. * exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update. * frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update. * gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update. * go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update. * i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update. * i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update. * infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update. * interps.c, language.c, linespec.c, linux-nat.c: Update. * m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update. * m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update. * macrotab.c, maint.c, mdebugread.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update. * mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update. * objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update. * parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update. * ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update. * regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update. * remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update. * s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update. * sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update. * solib-aix5.c, solib-svr4.c, solib.c, source.c: Update. * sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update. * symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update. * utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update. * win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update. * cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update. * cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update. * mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update. * tui/tui-file.c, tui/tui-interp.c: Update. 2005-02-10 Andrew Cagney <cagney@gnu.org> Mark up all error and warning messages. * ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update. * bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update. * core-aout.c, core-regset.c, corefile.c, corelow.c: Update. * cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update. * dbxread.c, demangle.c, doublest.c, dsrec.c: Update. * dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update. * event-top.c, exec.c, expprint.c, f-lang.c: Update. * f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update. * frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update. * gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update. * hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update. * hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update. * hpread.c, hpux-thread.c, i386-linux-nat.c: Update. * i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update. * i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update. * ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update. * infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update. * kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update. * m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update. * m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update. * maint.c, mdebugread.c, mem-break.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update. * nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update. * observer.c, ocd.c, p-lang.c, p-typeprint.c: Update. * p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update. * ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update. * remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update. * remote-rdp.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote-utils.h, remote.c: Update. * rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update. * ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update. * sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update. * solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update. * solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update. * somread.c, somsolib.c, source.c, stabsread.c: Update. * stack.c, std-regs.c, symfile-mem.c, symfile.c: Update. * symmisc.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update. * uw-thread.c, valarith.c, valops.c, valprint.c: Update. * value.c, varobj.c, version.in, win32-nat.c, wince.c: Update. * xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update. * cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update. * cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update. * mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update. * mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update. * mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update. * tui/tui-win.c: Update. 2005-02-10 Ian Lance Taylor <ian@airs.com> * MAINTAINERS: Update my e-mail address. 2005-02-10 Daniel Jacobowitz <dan@debian.org> From Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>: PR exp/1821 * cp-valprint.c: Include "language.h". (cp_print_value_fields): Pass the current language to fprintf_symbol_filtered. * Makefile.in (cp-valprint.o): Update dependencies. 2005-02-10 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_enum_cmd, add_setshow_cmd_full) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Replace print string parameter with fprint_setshow function. * command.h (fprint_setshow_ftype): Define. Update declarations. * cli/cli-setshow.c (do_setshow_command): When fprint_setshow is available, use that. * cli/cli-decode.h (struct cmd_list_element): Add field fprint_setshow. * complaints.c (fprint_setshow_complaints): New function. (_initialize_complaints): Pass to add_setshow_zinteger_cmd. * hppa-tdep.c (_initialize_hppa_tdep): Replace "print" parameter with NULL. * mips-tdep.c (_initialize_mips_tdep): Ditto. * m32r-rom.c (_initialize_m32r_rom): Ditto. * cris-tdep.c (_initialize_cris_tdep): Ditto. * arm-tdep.c (_initialize_arm_tdep): Ditto. * remote-rdi.c (_initialize_remote_rdi): Ditto. * alpha-tdep.c (_initialize_alpha_tdep): Ditto. * dwarf2read.c (_initialize_dwarf2_read): Ditto. * frame.c (_initialize_frame): Ditto. * target.c (initialize_targets): Ditto. * maint.c (_initialize_maint_cmds): Ditto. * observer.c (_initialize_observer): Ditto. * infcall.c (_initialize_infcall): Ditto. * breakpoint.c (_initialize_breakpoint): Ditto. * cli/cli-logging.c (_initialize_cli_logging): Ditto. * remote.c (add_packet_config_cmd, _initialize_remote): Ditto. * cli/cli-setshow.c (do_setshow_command): Move code printing the value to the end of the function. Handle MI and non-MI output differently. 2005-02-09 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_enum_cmd): Drop set_result and show_result parameters. * mips-tdep.c (_initialize_mips_tdep): Update calls. * command.h: Update declaration. * arm-tdep.c (_initialize_arm_tdep, _initialize_arm_tdep): Update calls. * NEWS: Mention removed commands. * m68hc11-tdep.c (show_regs): Delete, unused. (_initialize_m68hc11_tdep): Delete deprecated "regs" command. * gdb-events.sh: Delete deprecated "set eventdebug" and "show eventdebug" commands. * gdb-events.c: Regenerate. * gdbarch.sh: Delete deprecated "set archdebug" and "show archdebug" commands. * gdbarch.c: Regenerate. * cli/cli-cmds.c (init_cli_cmds): Delete deprecated "set remotedebug" and "show remotedebug". * arm-tdep.c (_initialize_arm_tdep): Delete deprecated "set arm disassembly-flavor", "show arm disassembly-flavor", and "othernames" commands. (arm_othernames): Delete unused function. * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call) (convert_code_addr_to_desc_addr): Convert any function code address to the corresponding function's descriptor. (ppc64_sysv_abi_return_value): have TYPE_CODE_ENUM and TYPE_CODE_INT use the same code paths as TYPE_CODE_INT. When writing, convert any function code address to the corresponding descriptor. * config/sh/linux.mt (TDEPFILES): Add symfile-mem.o. * config/powerpc/linux.mt (TDEPFILES): Ditto. * config/pa/linux.mt (TDEPFILES): Ditto. * config/mips/linux.mt (TDEPFILES): Ditto. * config/m68k/linux.mt (TDEPFILES): Ditto. * config/m32r/linux.mt (TDEPFILES): Ditto. * config/ia64/linux.mt (TDEPFILES): Ditto. * config/arm/linux.mt (TDEPFILES): Ditto. 2005-02-09 Corinna Vinschen <vinschen@redhat.com> * symmisc.c: Include gdb_stat.h. (maintenance_print_msymbols): Use inode numbers to compare files. 2005-02-08 Andrew Cagney <cagney@gnu.org> * value.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET) (METHOD_PTR_TO_VOFFSET): Move from here ... * cp-support.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET) (METHOD_PTR_TO_VOFFSET): ... to here. * cp-valprint.c, p-valprint.c, eval.c: Include "cp-support.h". * Makefile.in: Update dependencies. * exceptions.c: Do not include <setjmp.h>. (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Delete macros. (catch_exception, catch_exceptions_with_msg, catch_errors) (catch_command_errors): Use TRY_CATCH. (struct catcher): Use EXCEPTIONS_SIGJMP_BUF. (exceptions_state_mc_init): Rename catcher_init. (exceptions_state_mc): Rename catcher_state_machine. (exceptions_state_mc_action_iter) (exceptions_state_mc_action_iter_1): New functions. * exceptions.h: Include <setjmp.h>. (EXCEPTIONS_SIGJMP_BUF, EXCEPTIONS_SIGSETJMP) (EXCEPTIONS_SIGLONGJMP): Define. (exceptions_state_mc_init, exceptions_state_mc_action_iter) (exceptions_state_mc_action_iter_1): Declare. (TRY_CATCH): Define. * ppc-linux-tdep.c (ppc_linux_init_abi): Do not set malloc name, no longer needed. * ppc-linux-nat.c (ppc_register_u_addr): Hack around 64-bit PT_FPSCR breakage. * value.c (struct value): Move to here ... * value.h (struct value): ... from here. Copy comments to corresponding function declarations, re-order. 2005-02-07 Andrew Cagney <cagney@gnu.org> * value.c (set_value_bitpos, set_value_bitsize): Define. * value.h (set_value_bitpos, set_value_bitsize): Declare. * ada-lang.c, valarith.c: Update. * cp-valprint.c, c-valprint.c, infcall.c: Use value_contents or value_contents_writeable, include note that there are problems. * breakpoint.c, infcall.c: Use VALUE_LVAL. * value.h (set_value_offset): Declare. * value.c (set_value_offset): Declare. * gnu-v2-abi.c, jv-valprint.c, valarith.c, valops.c: Update. * findvar.c: Update. * value.h (value_next): Declare. * value.c (value_next): Define. * breakpoint.c: Update. * value.h (deprecated_set_value_modifiable) (deprecated_value_modifiable): Declare. * value.c (deprecated_set_value_modifiable): Define. (deprecated_value_modifiable): Define. * ada-lang.c, valops.c, breakpoint.c, tracepoint.c: Update. * value.h (deprecated_set_value_type): Declare. * value.c (deprecated_set_value_type): Define. * hpacc-abi.c, gnu-v2-abi.c, cp-valprint.c: Update. * c-valprint.c, jv-lang.c, objc-lang.c, ada-lang.c: Update. * infcall.c, printcmd.c, valops.c, eval.c, p-exp.y: Update. * ax-gdb.c, tracepoint.c: Update. * value.h (deprecated_value_lval_hack) (deprecated_value_address_hack) (deprecated_value_internalvar_hack) (deprecated_value_regnum_hack): Declare. (VALUE_LVAL, VALUE_ADDRESS, VALUE_INTERNALVAR) (VALUE_FRAME_ID, VALUE_REGNUM): Use. * value.c (deprecated_value_lval_hack) (deprecated_value_address_hack) (deprecated_value_internalvar_hack) (deprecated_value_regnum_hack): Define. * value.h (VALUE_POINTED_TO_OFFSET): Delete. (set_value_pointed_to_offset, value_pointed_to_offset): Declare. * value.c (set_value_pointed_to_offset): Define (value_pointed_to_offset): Define. * valops.c: Update. * value.h (VALUE_EMBEDDED_OFFSET): Delete. (value_embedded_offset, set_value_embedded_offset): Declare. * value.c (value_embedded_offset): Define. (set_value_embedded_offset): Define. * valops.c, p-valprint.c, mi/mi-main.c, hpacc-abi.c: Update. * gnu-v3-abi.c, eval.c, c-valprint.c, cp-valprint.c: Update. * cp-abi.h: Update. * value.h (VALUE_LAZY): Delete (set_value_lazy): Declare. * value.c (set_value_lazy): Define. * valops.c, valarith.c, jv-valprint.c, jv-lang.c: Update. * gnu-v2-abi.c, findvar.c, dwarf2loc.c, ada-lang.c: Update. 2005-02-06 Andrew Cagney <cagney@gnu.org> * value.h (VALUE_OPTIMIZED_OUT): Delete. (value_optimized_out, set_value_optimized_out): Declare. * value.c (set_value_optimized_out, value_optimized_out): Define. * valprint.c, findvar.c, dwarf2loc.c: Update. * value.c (value_contents, value_contents_writeable): New functions. * value.h (VALUE_CONTENTS): Delete macro. (value_contents, value_contents_writeable): Declare. * xstormy16-tdep.c, value.c, valops.c, valarith.c: Update. * stack.c, sparc-tdep.c, sparc64-tdep.c, sh-tdep.c: Update. * sh64-tdep.c, scm-valprint.c, scm-exp.c, s390-tdep.c: Update. * rs6000-tdep.c, p-valprint.c, printcmd.c: Update. * ppc-sysv-tdep.c, mips-tdep.c, mi/mi-main.c: Update. * m88k-tdep.c, m68hc11-tdep.c, m32r-tdep.c: Update. * jv-valprint.c, ia64-tdep.c, hppa-tdep.c: Update. * hpacc-abi.c, f-valprint.c, frv-tdep.c, eval.c: Update. * c-valprint.c, cris-tdep.c, cp-valprint.c: Update. * cli/cli-dump.c, breakpoint.c, avr-tdep.c, arm-tdep.c: Update. * arm-linux-tdep.c, amd64-tdep.c, alpha-tdep.c: Update. * ada-valprint.c, ada-lang.c: Update. 2005-02-03 Andrew Cagney <cagney@gnu.org> * utils.c (xzalloc): New function. * defs.h (XZALLOC): Use xzalloc. (xzalloc): Declare. * value.c (allocate_value): Allocate a zeroed buffer. * mdebugread.c (xzalloc): Delete. 2005-02-02 Andrew Cagney <cagney@gnu.org> * value.h (value_lazy): Declare. * varobj.c, value.c, valops.c, valarith.c, printcmd.c: Update. * cp-valprint.c, breakpoint.c, ada-lang.c: Update. * value.h (VALUE_CONTENTS_ALL): Delete. (value_contents_all): Declare. * value.c (value_contents_all): New function. * hpacc-abi.c, cp-valprint.c, valops.c, c-valprint.c: Update. * m68k-tdep.c, i386-tdep.c, infcall.c, valops.c: Update. * value.c (value_enclosing_type): New function. * value.h (VALUE_ENCLOSING_TYPE): Delete. (value_enclosing_type): Declare. * xstormy16-tdep.c, vax-tdep.c, m68k-tdep.c, i386-tdep.c: Update. * gnu-v3-abi.c, hpacc-abi.c, infcall.c, valops.c: Update. * value.c (value_contents_all_raw) (value_contents_raw): New functions. * value.h (VALUE_CONTENTS_ALL_RAW, VALUE_CONTENTS_RAW): Delete. (value_contents_raw, value_contents_all_raw): Declare functions. (VALUE_CONTENTS, VALUE_CONTENTS_ALL): Update. * std-regs.c, valarith.c, valops.c, eval.c: Update. * tracepoint.c, findvar.c: Update. 2005-02-01 Orjan Friberg <orjanf@axis.com> * regformats/reg-cris.dat: New file with register definitions for CRIS. * regformats/reg-crisv32.dat: Ditto for CRISv32. 2005-01-31 Andrew Cagney <cagney@gnu.org> * configure: Regenerate to track ../gettext.m4. 2005-01-29 Baurzhan Ismagulov <ibr@radix50.net> * MAINTAINERS: Add myself to "Write After Approval". * ax-gdb.c, ax-general.c, bcache.c, bfd-target.c, bsd-kvm.c, * buildsym.c, c-lang.c, c-typeprint.c, c-valprint.c, charset.c, * coff-pe-read.c, coffread.c, complaints.c, copying.c: I18n markup. 2005-01-29 Mark Kettenis <kettenis@gnu.org> * configure.ac: Remove extra check for ranlib. * configure: Regenerated. 2005-01-28 Andrew Cagney <cagney@gnu.org> * language.h (struct language_defn): Make la_val_print's buffer parameter a const bfd_byte. * cp-valprint.c (cp_print_value_fields, cp_print_value): Update. * ada-lang.c (ada_aligned_value_addr) (ada_value_primitive_packed_val, ada_which_variant_applies): Update. * valprint.c (val_print_array_elements): Update. * valprint.h (val_print_array_elements): Update. * ada-lang.h (ada_val_print, ada_aligned_value_addr) (ada_value_primitive_packed_val, ada_which_variant_applies): Update. * ada-valprint.c (ada_val_print, struct ada_val_print_args) (ada_val_print_1, ada_print_floating, printable_val_type) (print_record, val_print_packed_array_elements) (print_field_values, print_variant_part): Update. * c-lang.h (c_val_print, cp_print_value_fields): Update. * c-valprint.c (c_val_print): Update. * f-lang.h (f_val_print): Update. * f-valprint.c (f_val_print, f77_print_array_1) (f77_print_array): Update. * jv-lang.h (java_val_print): Update. * jv-valprint.c (java_print_value_fields, java_val_print): Update. * language.c (unk_lang_val_print): Update. * m2-lang.h (m2_val_print): Update. * m2-valprint.c (m2_val_print): Update. * p-lang.h (pascal_val_print): Update. (pascal_object_print_value_fields): Update. * p-valprint.c (pascal_val_print) (pascal_object_print_value_fields, pascal_object_print_value) (pascal_object_print_value): Update. * scm-lang.h (scm_val_print): Update. * scm-valprint.c (scm_val_print): Update. * value.h (val_print): Update. * p-lang.h (pascal_object_print_class_member) (pascal_object_print_class_method): Make buffer a const bfd_byte. * p-valprint.c (pascal_object_print_class_method) (pascal_object_print_class_method): Ditto. * language.h (struct language_defn): Make la_printstr's buffer parameter a const bfd_byte. * p-lang.h (pascal_printstr): Update function to match. * ada-valprint.c (ada_printstr): Update function to match. * scm-lang.c (scm_printstr): Update function to match. * p-lang.c (pascal_printstr): Update function to match. * ada-lang.h (ada_printstr): Update function to match. * m2-lang.c (m2_printstr): Update function to match. * objc-lang.c (objc_printstr): Update function to match. * c-lang.h (c_printstr): Update function to match. * f-lang.c (f_printstr): Update function to match. * c-lang.c (c_printstr): Update function to match. * language.c (unk_lang_printstr): Update function to match. * valprint.c (val_print_type_code_int): Make buffer a const bfd_byte. * valprint.h (val_print_type_code_int): Ditto. * objc-lang.h (c_val_print, c_value_print): Delete declarations. * cp-valprint.c (cp_print_class_method) (cp_print_class_member): Make buffer a const bfd_byte. * c-lang.h (cp_print_class_member, cp_print_class_method): Ditto. * ada-lang.c (value_from_contents_and_address) (to_record_with_fixed_variant_part) (value_tag_from_contents_and_address, ada_to_fixed_type) (to_fixed_variant_branch_type, to_fixed_record_type) (ada_template_to_fixed_record_type, cond_offset_host) (ada_template_to_fixed_record_type_1): Make buffer a const bfd_byte. * ada-lang.h (ada_template_to_fixed_record_type_1) (value_from_contents_and_address, ada_to_fixed_type): Ditto. * ada-valprint.c (char_at, printstr): Make buffer a const bfd_byte. * gdbtypes.h (print_scalar_formatted): Make buffer a const bfd_byte. * printcmd.c (print_scalar_formatted): Update. * value.h (value_bit_index, print_floating) (find_rt_vbase_offset): Make buffer a const bfd_byte. * valprint.c (print_floating): Update. * valarith.c (value_bit_index): Update. * valops.c (find_rt_vbase_offset): Update. * valprint.h (print_octal_chars, print_char_chars) (print_hex_chars, print_decimal_chars, print_binary_chars): Make buffer a const bfd_byte. * valprint.c (print_binary_chars, print_octal_chars) (print_decimal_chars, print_hex_chars, print_char_chars): Make "valaddr"buffer a const bfd_byte, ditto for local variables referencing that buffer. * m2-valprint.c: Include "c-lang.h". (c_val_print): Delete extern declaration. * scm-valprint.c: Include "c-lang.h". (c_val_print): Delete extern declaration. Makefile.in: Update dependencies. * gnu-v2-abi.h (gnuv2_baseclass_offset): Make "valaddr" a const bfd_byte. * cp-abi.h (baseclass_offset): Make "valaddr" a const bfd_byte. (struct cp_abi_ops): Make baseclass_offset's "valaddr" a const bfd_byte. * cp-abi.c (baseclass_offset): Update. * gnu-v2-abi.c (gnuv2_baseclass_offset): Update. * gnu-v2-abi.h: New file. * gnu-v2-abi.c: Include "gnu-v2-abi.h". (gnuv2_baseclass_offset): Delete declaration. * hpacc-abi.c: Include "gnu-v2-abi.h". (gnuv2_baseclass_offset): Delete extern declaration. * Makefile.in: Update dependencies. * doublest.c (floatformat_is_negative, floatformat_is_nan) (floatformat_mantissa, get_field): Make the buffer a const bfd_byte, simplify. 2005-01-27 Andrew Cagney <cagney@gnu.org> * value.h (struct value): Change type of contents to bfd_byte. (VALUE_CONTENTS_RAW): Simplify. * gdbarch.sh (integer_to_address): Change buf parameter to a const bfd_byte, make pure-multi-arch. * gdbarch.h, gdbarch.c: Regenerate. * mips-tdep.c (mips_integer_to_address): Update. * value.c (value_as_address): Update. * cli/cli-dump.h (fopen_with_cleanup): Make "filename" const. * cli/cli-dump.c (dump_binary_file, dump_bfd_file): Make string parameters const, change buf to a const bfd_byte. (fopen_with_cleanup, bfd_openw_with_cleanup): Make all string parameters const. * corefile.c (write_memory): Update, make a copy of the read-only buffer. * target.c (target_read_memory): Update. (target_write_memory): Update, make a copy of the read-only buffer. * gdbcore.h (write_memory): Change buffer type to bfd_byte, make const. * target.h (target_read_memory, target_write_memory): Change buffer type to bfd_byte; for write_memory, make it const. * symfile-mem.c (do_target_read_memory): New function. (symbol_file_add_from_memory): Pass do_target_read_memory to bfd_elf_bfd_from_remote_memory. * value.h: Indent using gdb_indent.sh. * configure: Regenerate to track ../gettext.m4 change. 2005-01-26 Andrew Cagney <cagney@gnu.org> * rs6000-tdep.c: Include "reggroups.h". (rs6000_gdbarch_init): Set register_reggroup_p. (rs6000_register_reggroup_p): New function. 2005-01-26 Orjan Friberg <orjanf@axis.com> * cris-tdep.c (enum cris_num_regs, enum cris_regnums) (cris_sigtramp_frame_unwind_cache, cris_register_size): Update for CRISv32. (crisv32_single_step_through_delay, cris_can_use_hardware_watchpoint) (cris_region_ok_for_watchpoint, cris_stopped_data_address) (crisv32_cannot_fetch_register, crisv32_cannot_store_register) (crisv32_register_type, cris_special_register_name) (crisv32_register_name): New functions. (cris_spec_reg_applicable): Recognize more versions. (cris_register_name): Update with call to cris_special_register_name. (find_cris_op): Filter out CRISv32 instructions. Tweaked comment and warning when unable to find step target. (CRISV10_ELF_NGREG, CRISV32_ELF_NGREG, crisv32_elf_gregset_t): Define. (supply_gregset): Add struct gdbarch_tdep. Set pseudo-PC register for CRISv32. (fetch_core_registers): Update for CRISv32. (cris_gdbarch_init): Set pc_regnum, register_type, num_regs, register_name, cannot_store_register, cannot_fetch_register, have_nonsteppable_watchpoint, single_step_through_delay for CRISv32. 2005-01-26 Nick Roberts <nickrob@snap.net.nz> * interps.c (interpreter_exec_cmd): Use condition, e.reason < 0, to raise an error. 2005-01-25 Andrew Cagney <cagney@gnu.org> * ppc-linux-tdep.c: Include "tramp-frame.h" (struct ppc_linux_sigtramp_cache) (ppc_linux_sigtramp_this_id, ppc_linux_sigtramp_prev_register) (ppc_linux_sigtramp_unwind, ppc_linux_sigtramp_sniffer) (ppc_linux_sigtramp_cache): Delete. (ppc32_linux_sigaction_cache_init) (ppc64_linux_sigaction_cache_init) (ppc32_linux_sighandler_cache_init) (ppc64_linux_sighandler_cache_init) (ppc32_linux_sigaction_tramp_frame) (ppc64_linux_sigaction_tramp_frame) (ppc32_linux_sighandler_tramp_frame) (ppc64_linux_sighandler_tramp_frame) (ppc_linux_sigtramp_cache, ppc_linux_init_abi): Implement 32 and 64-bit, sigaction and siginfo tramp-frame unwinders. * ppc-linux-tdep.c (ppc_linux_init_abi): Always set long_double_bit to 8. 2005-01-24 Andrew Cagney <cagney@gnu.org> * infrun.c (handle_inferior_event): Handle back-to-back and nested signals where the step_resume_breakpoint may have already been inserted. 2005-01-24 Andrew Cagney <cagney@gnu.org> * configure: Regenerate, ../gettext.m4 was updated. 2005-01-23 Mark Kettenis <kettenis@gnu.org> * NEWS: Mention new BSD user-level threads support. * i386obsd-tdep.c: Update copyright year. Include "bsd-uthread.h". (i386obsd_uthread_reg_offset): New variable. (I386OBSD_UTHREAD_ESP_OFFSET): New define. (i386obsd_supply_uthread, i386obsd_collect_uthread): New functions. (i386obsd_init_abi): Set supply_uthread and collect_uthread. * Makefile.in (i386obsd-tdep.o): Update dependencies. * config/i386/obsd.mt (TDEPFILES): Add bsd-uthread.o. 2005-01-23 Christopher Faylor <cgf@timesys.com> * win32-nat.c: Update copyright year. (child_init_thread_list): Set thread linked list point to NULL so that it won't be reused after clearing. 2005-01-21 Mark Kettenis <kettenis@gnu.org> * acconfig.h (HAVE_STRUCT_REG_R_FS, HAVE_STRUCT_R_GS): Remove undefs. * configure.ac: Use AC_CHECK_MEMBERS to check whether `struct thread' has a td_pcb member and whether `struct reg' has r_fs and r_gs members. * configure, config.in: Regenerate. 2005-01-21 Mark Kettenis <kettenis@gnu.org> * configure.ac: Remove ia64-*-aix* junk. * configure: Regenerate. * configure.ac: Use AC_CHECK_DECLS instead of gcc_AC_CHECK_DECLS and BFD_NEED_DECLARATION. Don't check if a declaration of strdup is necessary. * configure, config.in: Regenerate. * utils.c: Adjust for usage of AC_CHECK_DECLS instead of BFD_NEED_DECLARATION. Never provide a prototype for caninicalize_file_name. * gdb_string.h: Adjust for usage of AC_CHECK_DECLS instead of BFD_NEED_DECLARATION. * configure.ac (targ_archs): Use standard autoconf check for "struct stat.st_blocks" instead of rolling our own. * configure: Regenerated. * acconfig.h (HAVE_STRUCT_STAT_ST_BLOCKS): Remove undef. * config.in: Regenerated. 2005-01-21 Mark Kettenis <kettenis@gnu.org> * configure.ac: Modernize checks for `long long' and `long double' support. * configure: Regenerated. * acconfig.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG) (PRINT_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE): Remove undefs. * config.in: Regenerated. 2005-01-20 Mark Kettenis <kettenis@gnu.org> * acconfig.h (HAVE_STRUCT_SAVE_STATE_T) (HAVE_STRUCT_MEMBER_SS_WIDE): Remove undefs. * configure.ac: Remove checks for HP-UX save_state structure. * configure: Regenerated. 2005-01-19 Andrew Cagney <cagney@gnu.org> * utils.c (quit): Simplify, call fatal. * exceptions.c: Include "serial.h" (print_flush): Mimic flush code found in utils.c:quit. * Makefile.in: Update dependencies. 2005-01-19 Jim Blandy <jimb@redhat.com> * configure.tgt: Set build_rdi_share to "yes" on those targets that use that debugging protocol. Set build_nlm to yes to build NLM stub for Netware targets. * configure.ac: If build_rdi_share is "yes", then configure the rdi-share subdirectory. If build_nlm is "yes", the configure the "nlm" subdirectory. * configure: Regenerated. * rdi-share/configure, rdi-share/aclocal.m4: Regenerated using autoconf 2.59 and automake 1.9.3. 2005-01-19 Andrew Cagney <cagney@gnu.org> * exceptions.h (deprecated_throw_reason): Rename throw_reason. * exceptions.c (deprecated_throw_reason): Rename throw_reason. * utils.c (internal_verror, quit): Update. * remote-sds.c (interrupt_query): Update. * remote-mips.c (mips_error, mips_kill): Update. * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Update. * remote.c (interrupt_query): Update. * ocd.c (interrupt_query): Update. * nto-procfs.c (interrupt_query): Update. * monitor.c (monitor_interrupt_query): Update. * breakpoint.c (break_command_1): Update. * infrun.c: (resume, proceed, wait_for_inferior) (handle_inferior_event, stop_stepping) (prepare_to_wait): Write debug output to gdb_stdlog. 2005-01-19 Mark Kettenis <kettenis@gnu.org> * inf-ptrace.c (inf_ptrace_prepare_to_store) (inf_ptrace_post_startup_inferior) (inf_ptrace_acknowledge_created_inferior) (inf_ptrace_insert_fork_catchpoint) (inf_ptrace_remove_fork_catchpoint) (inf_ptrace_insert_vfork_catchpoint): (inf_ptrace_remove_vfork_catchpoint, inf_ptrace_follow_fork) (inf_ptrace_insert_exec_catchpoint) (inf_ptrace_remove_exec_catchpoint): Remove functions. (inf_ptrace_reported_exec_events_per_exec_call): Tweak comment. (inf_ptrace_target): Don't set to_prepare_to_store, to_post_startup_inferior, to_acknowledge_created_inferior, to_insert_fork_ctachpoint, to_remove_fork_catchpoint, to_insert_vfork_catchpoint, to_remove_vfork_catchpoint, to_follow_fork, to_insert_exec_catchpoint, to_remove_exec_catchpoint. 2005-01-18 Andrew Cagney <cagney@gnu.org> * target.h (struct target_ops): Change return type of to_insert_fork_catchpoint, to_insert_vfork_catchpoint and to_insert_exec_catchpoint to void. (child_insert_fork_catchpoint, child_insert_vfork_catchpoint) (child_insert_exec_catchpoint): Change return type to void. * target.c (update_current_target): Update. (debug_to_insert_fork_catchpoint) (debug_to_insert_vfork_catchpoint) (debug_to_insert_exec_catchpoint): Update. * inf-child.c (inf_child_insert_fork_catchpoint) (inf_child_insert_vfork_catchpoint) (inf_child_insert_exec_catchpoint): Update. * breakpoint.c (insert_catchpoint): Update, do not throw an error. * linux-nat.c (child_insert_fork_catchpoint) (child_insert_vfork_catchpoint) (child_insert_exec_catchpoint): Update. * inftarg.c (child_insert_fork_catchpoint) (child_insert_vfork_catchpoint,) (child_insert_exec_catchpoint): Update. * remote.c (remote_open_1): Use throw_exception. 2005-01-17 Michael Snyder <msnyder@redhat.com> * mips-linux-tdep.c: Whitespace tweaks. 2005-01-17 Corinna Vinschen <vinschen@redhat.com> * infcmd.c (attach_command): Call CLEAR_SOLIB if available. 2005-01-17 Andrew Cagney <cagney@gnu.org> * top.h (source_error, source_pre_error): Delete declaration. * cli/cli-script.c (source_error_allocated, source_error): Delete. (script_from_file, source_cleanup_lines): Do not manipulate source_error_allocated, error_pre_print and source_error. (struct source_cleanup_lines_args): Delete fields old_pre_error, and old_error_pre_print. * top.c (source_error_allocated, source_error) (source_pre_error): Delete. (command_line_input): Do not set error_pre_print. * event-top.c (command_line_handler): Do not set error_pre_print. 2005-01-16 Jason Thorpe <thorpej@netbsd.org> * MAINTAINERS: Update my email address. 2005-01-16 Mark Kettenis <kettenis@gnu.org> * configure.ac: Provide prerequisite headers when checking <term.h>. * configure: Regenerate. * amd64fbsd-tdep.c: Update copyright year. Include "gdb_assert.h" and "bsd-uthread.h". (amd64fbsd_jmp_buf_reg_offset): New variable. (amd64fbsd_supply_uthread, amd64fbsd_collect_uthread): New functions. (amd64fbsd_init_abi): Set supply_uthread and collect_uthread. * i386fbsd-tdep.c: Fix typo. * Makefile.in (amd64fbsd-tdep.o): Update dependencies. * config/i386/fbsd64.mt (TDEPFILES): Add bsd-uthread.o. 2005-01-16 Andrew Cagney <cagney@gnu.org> * cli/cli-script.c: Include "exceptions.h". (struct wrapped_read_command_file_args): Define. (wrapped_read_command_file): New function. (script_from_file): Replace direct call to read_command_file by one wrapped by an exception handler. * exceptions.c (throw_it): Free the old message after creating the new. * Makefile.in: Update dependencies. 2005-01-16 Mark Kettenis <kettenis@gnu.org> * sparc64fbsd-tdep.c: Update copyright year. (sparc64fbsd_collect_gregset, sparc64fbsd_collect_fpregset): New functions. (sparc64fbsd_init_abi): Create register sets with collect functions. * sparc64fbsd-nat.c: Include "fbsd-nat.h". (_initialize_sparc64fbsd_nat): Add some extra features to the generic SPARC target. * Makefile.in (sparc64fbsd-nat.o): Update dependencies. * config/sparc/fbsd.mh (NATDEPFILES): Add fbsd-nat.o and gcore.o. (NAT_FILE): Set to solib.h. * config/sparc/nm-fbsd.h: Remove file. * sparc64-tdep.c (sparc64_store_arguments): Fix typo. * sparc-tdep.c (sparc_integral_or_pointer_p): Simplify. 2005-01-16 Andrew Cagney <cagney@gnu.org> * exceptions.c (struct catcher): Delete saved_error_pre_print and saved_quit_pre_print. (catcher_init): Delete parameter errstring, do not override the pre_print strings. (catcher_pop): Do not restore the pre_print strings. (catch_exception, catch_exceptions_with_msg, catch_errors) (catch_command_errors): Update catch_init calls. 2005-01-16 Mark Kettenis <kettenis@gnu.org> * Makefile.in (sparc64fbsd-nat.o): Update dependencies. * sparc64fbsd-nat.c: Update copyright year. Include "target.h". 2005-01-15 Andrew Cagney <cagney@gnu.org> * acinclude.m4: Include ../bfd/bfd.m4 instead of ../bfd/acinclude.m4. Include ../gettext.m4. * aclocal.m4, configure: Re-generate. * exceptions.c (do_captured_command) (struct captured_command_args): Delete. (catch_command_errors): Simplify by inlining call to catch_errors. * exceptions.c (struct catcher): Delete field print_message. (catcher_init): Delete print_message parameter. (catch_exception, catch_exceptions_with_msg, catch_errors): Update. (throw_it): Delete prefix parameter. (throw_verror, throw_vfatal, throw_error): Update. 2005-01-14 Andrew Cagney <cagney@gnu.org> * exceptions.c (print_and_throw): Delete, replaced by throw_it. (throw_reason): Leave the exception's message field blank. (throw_it): New function, create the exception and throw it. (throw_verror, throw_vfatal, throw_error): Call throw_it. (print_any_exception): New function. (catch_errors, catch_exceptions_with_msg): Call print_any_exception. (throw_exception): Move code calling annotate_error and annotate_quit from here ... (print_exception): ... to here. * exceptions.c (exception_fprintf, exception_print): Move printing of \n from here ... (print_exception): ... to here. (print_flush): New function. (exception_print, exception_fprintf): Replace duplicated flush and wrap code with call to print_flush. (print_and_throw): Simplify, by using xstrvprintf, print_flush, and print_exception. (do_write): Delete. * remote-sds.c (interrupt_query): Call throw_reason instead of throw_exception. * remote-mips.c (mips_error, mips_kill): Ditto * ocd.c (interrupt_query): Ditto. * nto-procfs.c (interrupt_query): Ditto. * monitor.c (monitor_interrupt_query): Ditto. 2005-01-14 Jeff Johnston <jjohnstn@redhat.com> * ia64-linux-nat.c: Include "ia64-tdep.h" to get register definitions. 2005-01-14 Andrew Cagney <cagney@gnu.org> * exceptions.h (catch_exceptions): Delete errstring parameter. (catch_exceptions_with_msg): Ditto. * exceptions.c (catch_exceptions_with_msg): Update. (catch_exceptions): Update. * symfile-mem.c (add_vsyscall_page): Update. * frame.c (get_current_frame): Update. * wrapper.c (gdb_value_struct_elt): Update. * exceptions.c (catch_exceptions): Update. * thread.c (gdb_list_thread_ids, gdb_thread_select): Update. * breakpoint.c (gdb_breakpoint_query, gdb_breakpoint): Update. * remote-fileio.c (remote_fileio_request): Update. * exceptions.h (exception_fprintf): Declare. (exception_print): Drop pre_print parameter. * mi/mi-main.c (mi_execute_command): Update exception_print call. * cli/cli-interp.c (safe_execute_command): Update exception_print call. * remote.c (remote_open_1): Instead of passing an error prefix to catch_exceptions, use catch_exceptions and exception_fprintf. (remote_start_remote): Change return type to void. * breakpoint.c (insert_bp_location): Instead of passing an error prefix to catch_exceptions, use catch_exceptions and exception_fprintf. (insert_catchpoint): Change return type to void. (break_command_1): Update exception_print call. * exceptions.c (exception_fprintf): New function. (print_exception): New function. (exception_print): Use print_exception. * utils.c (error_output_message): Delete function. * defs.h (error_output_message): Delete declaration. * linespec.c (symtab_from_filename, decode_variable): Use throw_error instead of error_silent. * breakpoint.c (do_captured_parse_breakpoint): Change return type to void. (break_command_1): Use catch_exception and check the error return status. * exceptions.c (throw_error): New function. (throw_vsilent): Delete function. * exceptions.h (throw_error): Declare. (throw_vsilent): Delete declaration. * utils.c (error_silent): Delete function. * defs.h (error_silent): Delete declaration. * mi/mi-main.c (mi_execute_command): Print the exception. * cli/cli-interp.c (safe_execute_command): Print the exception. * exceptions.h (exception_print): Declare. * exceptions.c (struct catcher): Add field print_message. (catcher_init): Add parameter print_message, store in the catcher struct. (print_and_throw): Only print the message when print_message. (catch_exceptions_with_msg, catch_errors): Pass print_message=1 to catcher_init. (catch_exception): Pass print_message=0 to catcher_init. * varobj.c (varobj_create): Add missing \n. 2005-01-13 Michael Snyder <msnyder@redhat.com> * cli/cli-decode.h: Whitespace tweaks. * wince.c: Whitespace tweaks. * uw-thread.c: Whitespace tweaks. * utils.c: Whitespace tweaks. * tracepoint.[ch]: Whitespace tweaks. * solist.h: Whitespace tweaks. 2005-01-13 Andrew Cagney <cagney@gnu.org> * exceptions.h (struct exception): Make message const. * mi/mi-main.c (mi_execute_command): Pass result.message directly to fputstr_unfiltered. 2005-01-13 Michael Snyder <msnyder@redhat.com> * stack.c: Whitespace tweaks. * somsolib.[ch]: Whitespace tweaks. * solib-aix.c: Whitespace tweaks. * solib.c: Whitespace tweaks. * solib-frv.c: Whitespace tweaks. * solib.h: Whitespace tweaks. * solib-irix.c: Whitespace tweaks. * solib-som.c: Whitespace tweaks. * solib-sunos.c: Whitespace tweaks. * solib-svr4.[ch]: Whitespace tweaks. * ser-tcp.c: Whitespace tweaks. * ser-unix.c: Whitespace tweaks. * serial.h: Whitespace tweaks. * scm-valprint.c: Whitespace tweaks. * rs6000-tdep.c: Whitespace tweaks. * rs6000-nat.c: Whitespace tweaks. * remote.c: Whitespace tweaks. 2005-01-13 Andrew Cagney <cagney@gnu.org> * defs.h (error_last_message, error_init): Delete declaration. * utils.c (fatal, vfatal): Call throw_vfatal. (error, verror): Call throw_verror; (do_write, error_stream_1): Delete function. (error_stream): Simplify, call error. (error_last_message, error_init, gdb_lasterr): Delete. (error_silent): Simplify, call throw_vsilent. * mi/mi-interp.c (mi_cmd_interpreter_exec): Dup the message. * main.c (captured_main): Delete call to error_init. * exceptions.c (throw_verror, throw_verror) (throw_vsilent): New functions. (do_write, print_and_throw): New functions. (last_message): New global. (throw_reason): Replace error_last_message with last_message. (catch_exceptions_with_msg): Dup the message. * exceptions.h (throw_verror, throw_vfatal, throw_vsilent): Declare. 2005-01-13 Michael Snyder <msnyder@redhat.com> * remote-st.c: Whitespace tweaks. * remote-sim.c: Whitespace tweaks. * remote-mips.c: Whitespace tweaks. * pa64solib.[ch]: Whitespace tweaks. * mdebugread.c: Whitespace tweaks. * main.c: Whitespace tweaks. * interps.c: Whitespace tweaks. * infrun.c: Whitespace tweaks. * infcmd.c: Whitespace tweaks. * hpux-thread.c: Whitespace tweaks. * hppa-hpux-tdep.c: Whitespace tweaks. * gdbcore.h: Whitespace tweaks. * gdbcmd.h: Whitespace tweaks. * gdb-events[.c, .h, .sh]: Whitespace tweaks. * corefile.c: Whitespace tweaks. * completer.c: Whitespace tweaks. * coff-solib.c: Whitespace tweaks. * coff-solib.h: Whitespace tweaks. * cli-out.c: Whitespace tweaks. * breakpoint.c: Whitespace tweaks. * cli/cli-interp.c: Tweak comments, per coding standard. 2005-01-13 Andrew Cagney <cagney@gnu.org> * breakpoint.c (gdb_breakpoint_query): Update, use catch_exceptions_with_msg. (do_captured_breakpoint): Add uiout parameter. (gdb_breakpoint): Update, use catch_exceptions_with_msg. * mi/mi-main.c (mi_cmd_thread_select): Pass mi_error_message to gdb_thread_select. Return MI_CMD_ERROR instead of MI_CMD_CAUGHT_ERROR. (mi_cmd_thread_list_ids): Ditto for gdb_list_thread_ids. (enum captured_mi_execute_command_actions): Delete EXECUTE_COMMAND_DISPLAY_ERROR. (captured_mi_execute_command): Delete code handling MI_CMD_CAUGHT_ERROR. (mi_execute_command): Don't check for EXECUTE_COMMAND_DISPLAY_ERROR. * mi/mi-cmd-break.c (breakpoint_notify): Update call to gdb_breakpoint_query. (mi_cmd_break_insert): Pass mi_error_message to gdb_breakpoint. * mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_CAUGHT_ERROR. * gdb.h (gdb_thread_select, gdb_list_thread_ids) (gdb_breakpoint, gdb_breakpoint_query): Add error_message parameter. * thread.c (thread_command): Update call. (gdb_thread_select, gdb_list_thread_ids): Update, call catch_exceptions_with_msg. * mi/mi-main.c (mi_execute_command): Use catch_exception, eliminate call to error_last_message. (captured_mi_execute_command): Change return type to void. 2005-01-12 Andrew Cagney <cagney@gnu.org> * exceptions.c (exception_none): New variable. * Makefile.in: Update dependencies. * interps.c: Include "exceptions.h". (interpreter_exec_cmd, interp_exec): Update to return "struct exception" * exceptions.h (no_exception): Declare. * tui/tui-interp.c (tui_exec): Update to return "struct exception" * mi/mi-interp.c: Include "exceptions.h". (mi_cmd_interpreter_exec, mi_interpreter_exec): Update to return 'struct exception". * cli/cli-interp.c (cli_interpreter_exec, safe_execute_command) (do_captured_execute_command): Update to use catch_exception. * interps.h: Include "exceptions.h". (interp_exec_ftype, interp_exec): Return "struct exception". * exceptions.h (throw_reason): Rename throw_exception. (enum errors, struct exception): Define. (catch_exception_ftype): Define. (catch_exception, throw_exception): Declare. * exceptions.c (throw_exception): Rewrite. (throw_reason): New function. (struct catcher, catcher_state_machine): Replace "reason" with "exception", delete "gdberrmsg". (catch_exception): New function. (catcher_init): Replace "gdberrmsg" parameter with "exception". (catch_errors, catch_exceptions_with_msg): Re-implement passing exception to catcher_init. * utils.c (error_silent, error_stream_1): Use throw_reason. (internal_verror, quit): Ditto. * breakpoint.c (insert_catchpoint, break_command_1): Ditto. * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Ditto. * remote.c (remote_open_1, interrupt_query): Ditto. 2005-01-12 Mark Kettenis <kettenis@gnu.org> * i386fbsd-tdep.c: Update copyright year. Include "gdbcore.h", "regcache.h", "gdb_assert.h" and "bsd-uthread.h". (i386fbsd_jmp_buf_reg_offset): New variable. (i386fbsd_supply_uthread, i386fbsd_collect_uthread): New functions. (i386fbsdaout_init_abi): Set supply_uthread and collect_uthread. * Makefile.in (i386fbsd-tdep.o): Update dependency. * config/i386/fbsd.mt (TDEPFILES): Add bsd-uthread.o. * bsd-uthread.h: New file. * bsd-uthread.c: New file. * Makefile.in (bsd_uthread_h): New variable. (ALLDEPFILES): Add bsd-uthread.c. (bsd-uthread.o): New dependency. * solib.h Update copyright year. (struct so_list): Forward declaration. (solib_read_symbols): New prototype. * solib.c (solib_read_symbols): New function. (solib_add): Call solib_read_symbols to read in symbols. (update_solib_list): Call observer_notify_solib_loaded. * i386bsd-nat.c: Update copyright year. Don't include <sys/param.h> and <sys/user.h>. (register_u_addr, kernel_u_size): Remove functions. * config/i386/obsd.mh (NAT_FILE): Remove. * config/i386/obsdaout.mh (NAT_FILE): Set to solib.h. * config/i386/nm-obsd.h: Remove file. 2005-01-12 Andrew Cagney <cagney@gnu.org> * exceptions.c: Include "gdb_string.h". (enum catcher_state, struct catcher): Define. (current_catcher): New global, replaces catch_return; (catch_return): Delete. (throw_exception): Use current_catcher->buf; (catcher_init, catcher_pop, catcher_state_machine): New functions. (catcher): Delete. (struct catch_errors_args): Delete. (do_catch_errors): Delete. (catch_exceptions): Replace body with call to catch_exceptions_with_msg. (catcher): Delete. (catch_exceptions_with_msg, catch_errors): Re-implement using catcher_state_machine. * exceptions.h (enum return_reason, RETURN_MASK) (RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL) (return_mask, throw_exception, catch_exceptions_ftype) (catch_exceptions_with_msg, catch_errors_ftype, catch_errors) (catch_command_errors_ftype, catch_command_errors): Move to exceptions.h. * exceptions.c, exceptions.h: New files. * top.c: Do not include <setjmp.h>. (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP, catch_return) (throw_exception, catcher, catch_exceptions) (catch_exceptions_with_msg, struct catch_errors_args) (do_catch_errors, catch_errors, struct captured_command_args) (do_captured_command, catch_command_errors): Move to exceptions.c. * wrapper.c, wince.c, win32-nat.c, utils.c: Include "exceptions.h". * tui/tui-interp.c, top.c, thread.c, symmisc.c: Ditto. * symfile-mem.c, stack.c, solib.c, rs6000-nat.c: Ditto. * remote-sds.c, remote-mips.c, remote-fileio.c: Ditto. * remote-e7000.c, objc-lang.c, ocd.c: Ditto. * remote.c, nto-procfs.c, monitor.c, mi/mi-main.c: Ditto. * main.c, m32r-rom.c, infrun.c, inf-loop.c: Ditto. * hppa-hpux-tdep.c, frame.c, event-top.c, event-loop.c: Ditto. * corelow.c, corefile.c, cli/cli-interp.c, breakpoint.c: Ditto. * ada-valprint.c, ada-lang.c: Ditto. * Makefile.in (HFILES_NO_SRCDIR, COMMON_OBS): Add exceptions.h and exceptions.o. Update all dependencies. 2005-01-11 Mark Kettenis <kettenis@gnu.org> * config/i386/nm-fbsd.h: Update copyright year. Don't include "config/nm-bsd.h". (KERNEL_U_SIZE): Remove macro. (kernel_u_size): Remove prototype. * config/vax/nbsdaout.mh (NAT_FILE): Remove. * config/vax/nm-nbsdaout.h: Remove file. 2005-01-10 Elena Zannoni <ezannoni@redhat.com> * MAINTAINERS: Remove self from sh/sh64 maintainership. 2005-01-10 Andrew Cagney <cagney@gnu.org> * MAINTAINERS: List Andrew Cagney and Kevin Buettner as can commit changes to PowerPC, and Andrew Cagney as lead PowerPC GNU/Linux maintainer. * MAINTAINERS: Hans-Peter Nilsson and Orjan Friberg can commit changes to CRIS. * MAINTAINERS: Remove "Maintenance Only". Spell out that CAN COMMIT means can approve). 2005-01-10 Mark Kettenis <kettenis@gnu.org> * vax-nat.c: Update copyright year. Include "inf-ptrace.h". (vax_register_u_offset): Make statuc. (_initialize_vax_nat): Construct and add target vector. * config/vax/vax.mh (NATDEPFILES): Remove infptrace.o and inftarg.o. Add inf-ptrace.o. * Makefile.in (vax-nat.o): Update dependencies. * inf-ptrace.h: Update copyright year. Sync comment with inf-ptrace.c. (inf_ptrace_trad_target): New prototype. * inf-ptrace.c: Update copyright year. Include "regcache.h" and "gdb_assert.h" (inf_ptrace_target): Add comment. (inf_ptrace+register_u_offset): New variable. (inf_ptrace_fetch_register, inf_ptrace_fetch_registers) (inf_ptrace_store_register, inf_ptrace_store_registers) (inf_ptrace_trad_target): New functions. * Makefile.in (inf-ptrace.o): Update dependencies. 2005-01-09 Mark Kettenis <kettenis@gnu.org> * configure.ac: Provide prerequisite headers when checking <link.h>, <sys/proc.h> and <sys/user.h>. * configure: Regenerate. 2005-01-08 Mark Kettenis <kettenis@gnu.org> * config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Set to tm-ppc-eabi.h instead of the removed tm-nbsd.h. 2005-01-07 Mark Kettenis <kettenis@gnu.org> * config/ia64/tm-linux.h: Tweak comment. Update copyright year. Don't include "tm-ia64.h". * config/ia64/ia64.mt (DEPRECATED_TM_FILE): Remove. * config/ia64/tm-ia64.h: Remove. Move contents ... * ia64-tdep.h: ... here. Update copyright year. 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. * configure.tgt: Disable arm*-*-*, thumb*-*-*, strongarm*-*-*, xscale-*-* and i[34567]86-*-netware* code adding rdi-share or nlm to configdirs. * configure.in: Replace configdirs with multiple references to AC_CONFIG_SUBDIRS. * configure: Re-generate. 2005-01-05 Andreas Schwab <schwab@suse.de> * ia64-tdep.c: Include "osabi.h". (native_find_global_pointer): Delete. (ia64_find_global_pointer): Renamed from generic_elf_find_global_pointer. (FIND_GLOBAL_POINTER): Delete. Change all users to call ia64_find_global_pointer instead. (ia64_gdbarch_init): Call gdbarch_init_osabi. Remove references to ia64_linux_sigcontext_register_address and ia64_linux_write_pc. Don't set tdep->find_global_pointer. (_initialize_ia64_tdep): Call gdbarch_register instead of deprecated register_gdbarch_init. (struct gdbarch_tdep): Remove find_global_pointer field and move to ... * ia64-tdep.h (struct gdbarch_tdep): ... here. (ia64_linux_sigcontext_register_address): Remove declaration. (ia64_linux_getunwind_table): Likewise. (ia64_linux_write_pc): Likewise. * ia64-linux-tdep.c: Include "osabi.h". (ia64_linux_sigcontext_register_address): Make static. (ia64_linux_write_pc): Likewise. (ia64_linux_init_abi): New. (_initialize_ia64_linux_tdep): New. * Makefile.in (ia64-tdep.o, ia64-linux-tdep.o): Depend on $(osabi_h). 2005-01-05 Kevin Buettner <kevinb@redhat.com> * ia64-tdep.c (ia64_gdbarch_init): Eliminate dependency on functions in ia64-aix-tdep.c. * ia64-tdep.h (ia64_aix_sigcontext_register_address): Remove function defined in ia64-aix-tdep.c. * ia64-aix-tdep.c: Remove file. * config/ia64/linux.mt (TDEPFILES): Remove ia64-aix-tdep.o from this list. * Makefile.in (ia64-aix-tdep.o): Delete. 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> Committed by Andrew Cagney. * ada-valprint.c, aix-thread.c, alpha-nat.c: I18n markup. * alphabsd-nat.c, alphanbsd-tdep.c, amd64-linux-nat.c: I18n markup. * amd64-tdep.c, amd64bsd-nat.c, amd64fbsd-nat.c: I18n markup. * arch-utils.c, arm-linux-nat.c, arm-tdep.c: I18n markup. * armnbsd-nat.c, armnbsd-tdep.c, auxv.c, avr-tdep.c: I18n markup. * aix-thread.c (_initialize_aix_thread): Get rid of the deprecated_add_show_from_set call. * alpha-tdep.c (_initialize_alpha_tdep): Ditto. * arm-tdep.c (_initialize_arm_tdep): Ditto. * command.h (add_setshow_enum_cmd): Add arguments for returning new list elements. * cli/cli-decode.c (add_setshow_enum_cmd): Ditto. * mips-tdep.c (_initialize_mips_tdep): Modify calls to add_setshow_enum_cmd. 2005-01-04 Mark Kettenis <kettenis@gnu.org> * configure.host (ia64-*-aix*): Remove. * configure.tgt (ia64-*-aix*): Remove. * config/ia64/aix.mh: Remove file. * config/ia64/aix.mt: Remove file. * config/ia64/tm-aix.h: Remove file. * ia64-aix-nat.c: Remove file. * Makefile.in (ia64-aix-nat.o): Remove dependency. * config/m88k/obsd.mh (NATDEPFILES): Really remove inf-child.o. Add back inf-ptrace.o. 2005-01-04 Andrew Cagney <cagney@gnu.org> * version.in: Change format from 6.3.50_2005-01-04-cvs to 6.3.50.20050104-cvs. 2005-01-04 Andreas Schwab <schwab@suse.de> * breakpoint.c (break_command_1): Always free err_msg before returning when an exception was caught. 2005-01-01 Joel Brobecker <brobecker@gnat.com> * hppa-tdep.c (prologue_inst_adjust_sp): Fix small confusion in register number for addil instruction. For older changes see ChangeLog-2004. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: