# This file contains a collection of tests for the procedures in the
# file tclTimer.c, which includes the "after" Tcl command.  Sourcing
# this file into Tcl runs the tests and generates output for errors.
# No output means no errors were found.
#
# This file contains a collection of tests for one or more of the Tcl
# built-in commands.  Sourcing this file into Tcl runs the tests and
# generates output for errors.  No output means no errors were found.
#
# Copyright (c) 1997 by Sun Microsystems, Inc.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: timer.test,v 1.2 2001/09/14 01:43:50 zlaski Exp $

if {[string compare test [info procs test]] == 1} then {source defs}

test timer-1.1 {Tcl_CreateTimerHandler procedure} {
    foreach i [after info] {
	after cancel $i
    }
    set x ""
    foreach i {100 200 1000 50 150} {
	after $i lappend x $i
    }
    after 200
    update
    set x
} {50 100 150 200}

test timer-2.1 {Tcl_DeleteTimerHandler procedure} {
    foreach i [after info] {
	after cancel $i
    }
    set x ""
    foreach i {100 200 300 50 150} {
	after $i lappend x $i
    }
    after cancel lappend x 150
    after cancel lappend x 50
    after 200
    update
    set x
} {100 200}

# No tests for Tcl_ServiceTimer or ResetTimer, since it is already tested
# above.

test timer-3.1 {TimerHandlerEventProc procedure: event masks} {
    set x start
    after 100 { set x fired }
    update idletasks
    set result $x
    after 200
    update
    lappend result $x
} {start fired}
test timer-3.2 {TimerHandlerEventProc procedure: multiple timers} {
    foreach i [after info] {
	after cancel $i
    }
    foreach i {200 600 1000} {
	after $i lappend x $i
    }
    after 200
    set result ""
    set x ""
    update
    lappend result $x
    after 400
    update
    lappend result $x
    after 400
    update
    lappend result $x
} {200 {200 600} {200 600 1000}}
test timer-3.3 {TimerHandlerEventProc procedure: reentrant timer deletion} {
    foreach i [after info] {
	after cancel $i
    }
    set x {}
    after 100 lappend x 100
    set i [after 300 lappend x 300]
    after 200 after cancel $i
    after 400
    update
    set x
} 100
test timer-3.4 {TimerHandlerEventProc procedure: all expired timers fire} {
    foreach i [after info] {
	after cancel $i
    }
    set x {}
    after 100 lappend x a
    after 200 lappend x b
    after 300 lappend x c
    after 300
    vwait x
    set x
} {a b c}
test timer-3.5 {TimerHandlerEventProc procedure: reentrantly added timers don't fire} {
    foreach i [after info] {
	after cancel $i
    }
    set x {}
    after 100 {lappend x a; after 0 lappend x b}
    after 100
    vwait x
    set x
} a
test timer-3.6 {TimerHandlerEventProc procedure: reentrantly added timers don't fire} {
    foreach i [after info] {
	after cancel $i
    }
    set x {}
    after 100 {lappend x a; after 100 lappend x b; after 100}
    after 100
    vwait x
    set result $x
    vwait x
    lappend result $x
} {a {a b}}

# No tests for Tcl_DoWhenIdle:  it's already tested by other tests
# below.

test timer-4.1 {Tcl_CancelIdleCall procedure} {
    foreach i [after info] {
	after cancel $i
    }
    set x before
    set y before
    set z before
    after idle set x after1
    after idle set y after2
    after idle set z after3
    after cancel set y after2
    update idletasks
    concat $x $y $z
} {after1 before after3}
test timer-4.2 {Tcl_CancelIdleCall procedure} {
    foreach i [after info] {
	after cancel $i
    }
    set x before
    set y before
    set z before
    after idle set x after1
    after idle set y after2
    after idle set z after3
    after cancel set x after1
    update idletasks
    concat $x $y $z
} {before after2 after3}

test timer-5.1 {Tcl_ServiceIdle, self-rescheduling handlers} {
    foreach i [after info] {
	after cancel $i
    }
    set x 1
    set y 23
    after idle {incr x; after idle {incr x; after idle {incr x}}}
    after idle {incr y}
    vwait x
    set result "$x $y"
    update idletasks
    lappend result $x
} {2 24 4}

test timer-6.1 {Tcl_AfterCmd procedure, basics} {
    list [catch {after} msg] $msg
} {1 {wrong # args: should be "after option ?arg arg ...?"}}
test timer-6.2 {Tcl_AfterCmd procedure, basics} {
    list [catch {after 2x} msg] $msg
} {1 {expected integer but got "2x"}}
test timer-6.3 {Tcl_AfterCmd procedure, basics} {
    list [catch {after gorp} msg] $msg
} {1 {bad argument "gorp": must be cancel, idle, info, or a number}}
test timer-6.4 {Tcl_AfterCmd procedure, ms argument} {
    set x before
    after 400 {set x after}
    after 200
    update
    set y $x
    after 400
    update
    list $y $x
} {before after}
test timer-6.5 {Tcl_AfterCmd procedure, ms argument} {
    set x before
    after 300 set x after
    after 200
    update
    set y $x
    after 200
    update
    list $y $x
} {before after}
test timer-6.6 {Tcl_AfterCmd procedure, cancel option} {
    list [catch {after cancel} msg] $msg
} {1 {wrong # args: should be "after cancel id|command"}}
test timer-6.7 {Tcl_AfterCmd procedure, cancel option} {
    after cancel after#1
} {}
test timer-6.8 {Tcl_AfterCmd procedure, cancel option} {
    after cancel {foo bar}
} {}
test timer-6.9 {Tcl_AfterCmd procedure, cancel option} {
    foreach i [after info] {
	after cancel $i
    }
    set x before
    set y [after 100 set x after]
    after cancel $y
    after 200
    update
    set x
} {before}
test timer-6.10 {Tcl_AfterCmd procedure, cancel option} {
    foreach i [after info] {
	after cancel $i
    }
    set x before
    after 100 set x after
    after cancel {set x after}
    after 200
    update
    set x
} {before}
test timer-6.11 {Tcl_AfterCmd procedure, cancel option} {
    foreach i [after info] {
	after cancel $i
    }
    set x before
    after 100 set x after
    set id [after 300 set x after]
    after cancel $id
    after 200
    update
    set y $x
    set x cleared
    after 200
    update
    list $y $x
} {after cleared}
test timer-6.12 {Tcl_AfterCmd procedure, cancel option} {
    foreach i [after info] {
	after cancel $i
    }
    set x first
    after idle lappend x second
    after idle lappend x third
    set i [after idle lappend x fourth]
    after cancel {lappend x second}
    after cancel $i
    update idletasks
    set x
} {first third}
test timer-6.13 {Tcl_AfterCmd procedure, cancel option, multiple arguments for command} {
    foreach i [after info] {
	after cancel $i
    }
    set x first
    after idle lappend x second
    after idle lappend x third
    set i [after idle lappend x fourth]
    after cancel lappend x second
    after cancel $i
    update idletasks
    set x
} {first third}
test timer-6.14 {Tcl_AfterCmd procedure, cancel option, cancel during handler, used to dump core} {
    foreach i [after info] {
	after cancel $i
    }
    set id [
	after 100 {
	    set x done
	    after cancel $id
	}
    ]
    vwait x
} {}
test timer-6.15 {Tcl_AfterCmd procedure, cancel option, multiple interps} {
    foreach i [after info] {
	after cancel $i
    }
    interp create x
    x eval {set a before; set b before; after idle {set a a-after};
	    after idle {set b b-after}}
    set result [llength [x eval after info]]
    lappend result [llength [after info]]
    after cancel {set b b-after}
    set a aaa
    set b bbb
    x eval {after cancel set a a-after}
    update idletasks
    lappend result $a $b [x eval {list $a $b}]
    interp delete x
    set result
} {2 0 aaa bbb {before b-after}}
test timer-6.16 {Tcl_AfterCmd procedure, idle option} {
    list [catch {after idle} msg] $msg
} {1 {wrong # args: should be "after idle script script ..."}}
test timer-6.17 {Tcl_AfterCmd procedure, idle option} {
    set x before
    after idle {set x after}
    set y $x
    update idletasks
    list $y $x
} {before after}
test timer-6.18 {Tcl_AfterCmd procedure, idle option} {
    set x before
    after idle set x after
    set y $x
    update idletasks
    list $y $x
} {before after}
set event1 [after idle event 1]
set event2 [after 1000 event 2]
interp create x
set childEvent [x eval {after idle event in child}]
test timer-6.19 {Tcl_AfterCmd, info option} {
    lsort [after info]
} [lsort "$event1 $event2"]
test timer-6.20 {Tcl_AfterCmd, info option} {
    list [catch {after info a b} msg] $msg
} {1 {wrong # args: should be "after info ?id?"}}
test timer-6.21 {Tcl_AfterCmd, info option} {
    list [catch {after info $childEvent} msg] $msg
} "1 {event \"$childEvent\" doesn't exist}"
test timer-6.22 {Tcl_AfterCmd, info option} {
    list [after info $event1] [after info $event2]
} {{{event 1} idle} {{event 2} timer}}
after cancel $event1
after cancel $event2
interp delete x

set event [after idle foo bar]
scan $event after#%d id
test timer-7.1 {GetAfterEvent procedure} {
    list [catch {after info xfter#$id} msg] $msg
} "1 {event \"xfter#$id\" doesn't exist}"
test timer-7.2 {GetAfterEvent procedure} {
    list [catch {after info afterx$id} msg] $msg
} "1 {event \"afterx$id\" doesn't exist}"
test timer-7.3 {GetAfterEvent procedure} {
    list [catch {after info after#ab} msg] $msg
} {1 {event "after#ab" doesn't exist}}
test timer-7.4 {GetAfterEvent procedure} {
    list [catch {after info after#} msg] $msg
} {1 {event "after#" doesn't exist}}
test timer-7.5 {GetAfterEvent procedure} {
    list [catch {after info after#${id}x} msg] $msg
} "1 {event \"after#${id}x\" doesn't exist}"
test timer-7.6 {GetAfterEvent procedure} {
    list [catch {after info afterx[expr $id+1]} msg] $msg
} "1 {event \"afterx[expr $id+1]\" doesn't exist}"
after cancel $event

test timer-8.1 {AfterProc procedure} {
    set x before
    proc foo {} {
	set x untouched
	after 100 {set x after}
	after 200
	update
	return $x
    }
    list [foo] $x
} {untouched after}
test timer-8.2 {AfterProc procedure} {
    catch {rename bgerror {}}
    proc bgerror msg {
	global x errorInfo
	set x [list $msg $errorInfo]
    }
    set x empty
    after 100 {error "After error"}
    after 200
    set y $x
    update
    catch {rename bgerror {}}
    list $y $x
} {empty {{After error} {After error
    while executing
"error "After error""
    ("after" script)}}}
test timer-8.3 {AfterProc procedure, deleting handler from itself} {
    foreach i [after info] {
	after cancel $i
    }
    proc foo {} {
	global x
	set x {}
	foreach i [after info] {
	    lappend x [after info $i]
	}
	after cancel foo
    }
    after idle foo
    after 1000 {error "I shouldn't ever have executed"}
    update idletasks
    set x
} {{{error "I shouldn't ever have executed"} timer}}
test timer-8.4 {AfterProc procedure, deleting handler from itself} {
    foreach i [after info] {
	after cancel $i
    }
    proc foo {} {
	global x
	set x {}
	foreach i [after info] {
	    lappend x [after info $i]
	}
	after cancel foo
    }
    after 1000 {error "I shouldn't ever have executed"}
    after idle foo
    update idletasks
    set x
} {{{error "I shouldn't ever have executed"} timer}}

foreach i [after info] {
    after cancel $i
}

# No test for FreeAfterPtr, since it is already tested above.


test timer-9.1 {AfterCleanupProc procedure} {
    catch {interp delete x}
    interp create x
    x eval {after 200 {
	lappend x after
	puts "part 1: this message should not appear"
    }}
    after 200 {lappend x after2}
    x eval {after 200 {
	lappend x after3
	puts "part 2: this message should not appear"
    }}
    after 200 {lappend x after4}
    x eval {after 200 {
	lappend x after5
	puts "part 3: this message should not appear"
    }}
    interp delete x
    set x before
    after 300
    update
    set x
} {before after2 after4}