------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- M A K E -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2005 Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 2, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING. If not, write -- -- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, -- -- MA 02111-1307, USA. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with ALI; use ALI; with ALI.Util; use ALI.Util; with Csets; with Debug; with Fmap; with Fname; use Fname; with Fname.SF; use Fname.SF; with Fname.UF; use Fname.UF; with Gnatvsn; use Gnatvsn; with Hostparm; use Hostparm; with Makeusg; with Makeutl; use Makeutl; with MLib.Prj; with MLib.Tgt; use MLib.Tgt; with MLib.Utl; with Namet; use Namet; with Opt; use Opt; with Osint.M; use Osint.M; with Osint; use Osint; with Output; use Output; with Prj; use Prj; with Prj.Com; with Prj.Env; with Prj.Pars; with Prj.Util; with SFN_Scan; with Sinput.P; with Snames; use Snames; with Switch; use Switch; with Switch.M; use Switch.M; with Targparm; with Tempdir; with Ada.Exceptions; use Ada.Exceptions; with Ada.Command_Line; use Ada.Command_Line; with GNAT.Directory_Operations; use GNAT.Directory_Operations; with GNAT.Case_Util; use GNAT.Case_Util; with System.HTable; package body Make is use ASCII; -- Make control characters visible Standard_Library_Package_Body_Name : constant String := "s-stalib.adb"; -- Every program depends on this package, that must then be checked, -- especially when -f and -a are used. type Sigint_Handler is access procedure; procedure Install_Int_Handler (Handler : Sigint_Handler); pragma Import (C, Install_Int_Handler, "__gnat_install_int_handler"); -- Called by Gnatmake to install the SIGINT handler below procedure Sigint_Intercepted; -- Called when the program is interrupted by Ctrl-C to delete the -- temporary mapping files and configuration pragmas files. ------------------------- -- Note on terminology -- ------------------------- -- In this program, we use the phrase "termination" of a file name to -- refer to the suffix that appears after the unit name portion. Very -- often this is simply the extension, but in some cases, the sequence -- may be more complex, for example in main.1.ada, the termination in -- this name is ".1.ada" and in main_.ada the termination is "_.ada". ------------------------------------- -- Queue (Q) Manipulation Routines -- ------------------------------------- -- The Q is used in Compile_Sources below. Its implementation uses the -- GNAT generic package Table (basically an extensible array). Q_Front -- points to the first valid element in the Q, whereas Q.First is the first -- element ever enqueued, while Q.Last - 1 is the last element in the Q. -- -- +---+--------------+---+---+---+-----------+---+-------- -- Q | | ........ | | | | ....... | | -- +---+--------------+---+---+---+-----------+---+-------- -- ^ ^ ^ -- Q.First Q_Front Q.Last - 1 -- -- The elements comprised between Q.First and Q_Front - 1 are the -- elements that have been enqueued and then dequeued, while the -- elements between Q_Front and Q.Last - 1 are the elements currently -- in the Q. When the Q is initialized Q_Front = Q.First = Q.Last. -- After Compile_Sources has terminated its execution, Q_Front = Q.Last -- and the elements contained between Q.Front and Q.Last-1 are those that -- were explored and thus marked by Compile_Sources. Whenever the Q is -- reinitialized, the elements between Q.First and Q.Last - 1 are unmarked. procedure Init_Q; -- Must be called to (re)initialize the Q procedure Insert_Q (Source_File : File_Name_Type; Source_Unit : Unit_Name_Type := No_Name; Index : Int := 0); -- Inserts Source_File at the end of Q. Provide Source_Unit when possible -- for external use (gnatdist). Provide index for multi-unit sources. function Empty_Q return Boolean; -- Returns True if Q is empty procedure Extract_From_Q (Source_File : out File_Name_Type; Source_Unit : out Unit_Name_Type; Source_Index : out Int); -- Extracts the first element from the Q procedure Insert_Project_Sources (The_Project : Project_Id; All_Projects : Boolean; Into_Q : Boolean); -- If Into_Q is True, insert all sources of the project file(s) that are -- not already marked into the Q. If Into_Q is False, call Osint.Add_File -- for the first source, then insert all other sources that are not already -- marked into the Q. If All_Projects is True, all sources of all projects -- are concerned; otherwise, only sources of The_Project are concerned, -- including, if The_Project is an extending project, sources inherited -- from projects being extended. First_Q_Initialization : Boolean := True; -- Will be set to false after Init_Q has been called once Q_Front : Natural; -- Points to the first valid element in the Q Unique_Compile : Boolean := False; -- Set to True if -u or -U or a project file with no main is used Unique_Compile_All_Projects : Boolean := False; -- Set to True if -U is used RTS_Specified : String_Access := null; -- Used to detect multiple --RTS= switches type Q_Record is record File : File_Name_Type; Unit : Unit_Name_Type; Index : Int; end record; -- File is the name of the file to compile. Unit is for gnatdist -- use in order to easily get the unit name of a file to compile -- when its name is krunched or declared in gnat.adc. Index, when not 0, -- is the index of the unit in a multi-unit source. package Q is new Table.Table ( Table_Component_Type => Q_Record, Table_Index_Type => Natural, Table_Low_Bound => 0, Table_Initial => 4000, Table_Increment => 100, Table_Name => "Make.Q"); -- This is the actual Q -- The following instantiations and variables are necessary to save what -- is found on the command line, in case there is a project file specified. package Saved_Gcc_Switches is new Table.Table ( Table_Component_Type => String_Access, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 100, Table_Name => "Make.Saved_Gcc_Switches"); package Saved_Binder_Switches is new Table.Table ( Table_Component_Type => String_Access, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 100, Table_Name => "Make.Saved_Binder_Switches"); package Saved_Linker_Switches is new Table.Table (Table_Component_Type => String_Access, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 100, Table_Name => "Make.Saved_Linker_Switches"); package Switches_To_Check is new Table.Table ( Table_Component_Type => String_Access, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 100, Table_Name => "Make.Switches_To_Check"); package Library_Paths is new Table.Table ( Table_Component_Type => String_Access, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 100, Table_Name => "Make.Library_Paths"); package Failed_Links is new Table.Table ( Table_Component_Type => File_Name_Type, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 10, Table_Increment => 100, Table_Name => "Make.Failed_Links"); package Successful_Links is new Table.Table ( Table_Component_Type => File_Name_Type, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 10, Table_Increment => 100, Table_Name => "Make.Successful_Links"); package Library_Projs is new Table.Table ( Table_Component_Type => Project_Id, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 10, Table_Increment => 100, Table_Name => "Make.Library_Projs"); -- Two variables to keep the last binder and linker switch index -- in tables Binder_Switches and Linker_Switches, before adding -- switches from the project file (if any) and switches from the -- command line (if any). Last_Binder_Switch : Integer := 0; Last_Linker_Switch : Integer := 0; Normalized_Switches : Argument_List_Access := new Argument_List (1 .. 10); Last_Norm_Switch : Natural := 0; Saved_Maximum_Processes : Natural := 0; type Arg_List_Ref is access Argument_List; The_Saved_Gcc_Switches : Arg_List_Ref; Project_File_Name : String_Access := null; -- The path name of the main project file, if any Project_File_Name_Present : Boolean := False; -- True when -P is used with a space between -P and the project file name Current_Verbosity : Prj.Verbosity := Prj.Default; -- Verbosity to parse the project files Main_Project : Prj.Project_Id := No_Project; -- The project id of the main project file, if any Project_Object_Directory : Project_Id := No_Project; -- The object directory of the project for the last compilation. -- Avoid calling Change_Dir if the current working directory is already -- this directory -- Packages of project files where unknown attributes are errors Naming_String : aliased String := "naming"; Builder_String : aliased String := "builder"; Compiler_String : aliased String := "compiler"; Binder_String : aliased String := "binder"; Linker_String : aliased String := "linker"; Gnatmake_Packages : aliased String_List := (Naming_String 'Access, Builder_String 'Access, Compiler_String 'Access, Binder_String 'Access, Linker_String 'Access); Packages_To_Check_By_Gnatmake : constant String_List_Access := Gnatmake_Packages'Access; procedure Add_Source_Dir (N : String); -- Call Add_Src_Search_Dir. -- Output one line when in verbose mode. procedure Add_Source_Directories is new Prj.Env.For_All_Source_Dirs (Action => Add_Source_Dir); procedure Add_Object_Dir (N : String); -- Call Add_Lib_Search_Dir. -- Output one line when in verbose mode. procedure Add_Object_Directories is new Prj.Env.For_All_Object_Dirs (Action => Add_Object_Dir); procedure Change_To_Object_Directory (Project : Project_Id); -- Change to the object directory of project Project, if this is not -- already the current working directory. type Bad_Compilation_Info is record File : File_Name_Type; Unit : Unit_Name_Type; Found : Boolean; end record; -- File is the name of the file for which a compilation failed. -- Unit is for gnatdist use in order to easily get the unit name -- of a file when its name is krunched or declared in gnat.adc. -- Found is False if the compilation failed because the file could -- not be found. package Bad_Compilation is new Table.Table ( Table_Component_Type => Bad_Compilation_Info, Table_Index_Type => Natural, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 100, Table_Name => "Make.Bad_Compilation"); -- Full name of all the source files for which compilation fails Do_Compile_Step : Boolean := True; Do_Bind_Step : Boolean := True; Do_Link_Step : Boolean := True; -- Flags to indicate what step should be executed. -- Can be set to False with the switches -c, -b and -l. -- These flags are reset to True for each invokation of procedure Gnatmake. Shared_String : aliased String := "-shared"; Force_Elab_Flags_String : aliased String := "-F"; No_Shared_Switch : aliased Argument_List := (1 .. 0 => null); Shared_Switch : aliased Argument_List := (1 => Shared_String'Access); Bind_Shared : Argument_List_Access := No_Shared_Switch'Access; -- Switch to added in front of gnatbind switches. By default no switch is -- added. Switch "-shared" is added if there is a non-static Library -- Project File. Shared_Libgcc : aliased String := "-shared-libgcc"; No_Shared_Libgcc_Switch : aliased Argument_List := (1 .. 0 => null); Shared_Libgcc_Switch : aliased Argument_List := (1 => Shared_Libgcc'Access); Link_With_Shared_Libgcc : Argument_List_Access := No_Shared_Libgcc_Switch'Access; procedure Make_Failed (S1 : String; S2 : String := ""; S3 : String := ""); -- Delete all temp files created by Gnatmake and call Osint.Fail, -- with the parameter S1, S2 and S3 (see osint.ads). -- This is called from the Prj hierarchy and the MLib hierarchy. -------------------------- -- Obsolete Executables -- -------------------------- Executable_Obsolete : Boolean := False; -- Executable_Obsolete is initially set to False for each executable, -- and is set to True whenever one of the source of the executable is -- compiled, or has already been compiled for another executable. Max_Header : constant := 200; -- This needs a proper comment, it used to say "arbitrary" -- that's not an adequate comment ??? type Header_Num is range 1 .. Max_Header; -- Header_Num for the hash table Obsoleted below function Hash (F : Name_Id) return Header_Num; -- Hash function for the hash table Obsoleted below package Obsoleted is new System.HTable.Simple_HTable (Header_Num => Header_Num, Element => Boolean, No_Element => False, Key => Name_Id, Hash => Hash, Equal => "="); -- A hash table to keep all files that have been compiled, to detect -- if an executable is up to date or not. procedure Enter_Into_Obsoleted (F : Name_Id); -- Enter a file name, without directory information, into the has table -- Obsoleted. function Is_In_Obsoleted (F : Name_Id) return Boolean; -- Check if a file name, without directory information, has already been -- entered into the hash table Obsoleted. type Dependency is record This : Name_Id; Depends_On : Name_Id; end record; -- Components of table Dependencies below package Dependencies is new Table.Table ( Table_Component_Type => Dependency, Table_Index_Type => Integer, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 100, Table_Name => "Make.Dependencies"); -- A table to keep dependencies, to be able to decide if an executable -- is obsolete. procedure Add_Dependency (S : Name_Id; On : Name_Id); -- Add one entry in table Dependencies ---------------------------- -- Arguments and Switches -- ---------------------------- Arguments : Argument_List_Access; -- Used to gather the arguments for invocation of the compiler Last_Argument : Natural := 0; -- Last index of arguments in Arguments above Arguments_Collected : Boolean := False; -- Set to True when the arguments for the next invocation of the compiler -- have been collected. Arguments_Project : Project_Id; -- Project id, if any, of the source to be compiled Arguments_Path_Name : File_Name_Type; -- Full path of the source to be compiled, when Arguments_Project is not -- No_Project. Dummy_Switch : constant String_Access := new String'("- "); -- Used to initialized Prev_Switch in procedure Check procedure Add_Arguments (Args : Argument_List); -- Add arguments to global variable Arguments, increasing its size -- if necessary and adjusting Last_Argument. function Configuration_Pragmas_Switch (For_Project : Project_Id) return Argument_List; -- Return an argument list of one element, if there is a configuration -- pragmas file to be specified for For_Project, -- otherwise return an empty argument list. ------------------- -- Misc Routines -- ------------------- procedure List_Depend; -- Prints to standard output the list of object dependencies. This list -- can be used directly in a Makefile. A call to Compile_Sources must -- precede the call to List_Depend. Also because this routine uses the -- ALI files that were originally loaded and scanned by Compile_Sources, -- no additional ALI files should be scanned between the two calls (i.e. -- between the call to Compile_Sources and List_Depend.) procedure Inform (N : Name_Id := No_Name; Msg : String); -- Prints out the program name followed by a colon, N and S procedure List_Bad_Compilations; -- Prints out the list of all files for which the compilation failed procedure Verbose_Msg (N1 : Name_Id; S1 : String; N2 : Name_Id := No_Name; S2 : String := ""; Prefix : String := " -> "); -- If the verbose flag (Verbose_Mode) is set then print Prefix to standard -- output followed by N1 and S1. If N2 /= No_Name then N2 is printed after -- S1. S2 is printed last. Both N1 and N2 are printed in quotation marks. Usage_Needed : Boolean := True; -- Flag used to make sure Makeusg is call at most once procedure Usage; -- Call Makeusg, if Usage_Needed is True. -- Set Usage_Needed to False. procedure Debug_Msg (S : String; N : Name_Id); -- If Debug.Debug_Flag_W is set outputs string S followed by name N procedure Recursive_Compute_Depth (Project : Project_Id; Depth : Natural); -- Compute depth of Project and of the projects it depends on ----------------------- -- Gnatmake Routines -- ----------------------- Gnatmake_Called : Boolean := False; -- Set to True when procedure Gnatmake is called. -- Attempt to delete temporary files is made only when Gnatmake_Called -- is True. subtype Lib_Mark_Type is Byte; -- Used in Mark_Directory Ada_Lib_Dir : constant Lib_Mark_Type := 1; -- Used to mark a directory as a GNAT lib dir -- Note that the notion of GNAT lib dir is no longer used. The code -- related to it has not been removed to give an idea on how to use -- the directory prefix marking mechanism. -- An Ada library directory is a directory containing ali and object -- files but no source files for the bodies (the specs can be in the -- same or some other directory). These directories are specified -- in the Gnatmake command line with the switch "-Adir" (to specify the -- spec location -Idir cab be used). Gnatmake skips the missing sources -- whose ali are in Ada library directories. For an explanation of why -- Gnatmake behaves that way, see the spec of Make.Compile_Sources. -- The directory lookup penalty is incurred every single time this -- routine is called. procedure Check_Steps; -- Check what steps (Compile, Bind, Link) must be executed. -- Set the step flags accordingly. function In_Ada_Lib_Dir (File : File_Name_Type) return Boolean; -- Get directory prefix of this file and get lib mark stored in name -- table for this directory. Then check if an Ada lib mark has been set. procedure Mark_Directory (Dir : String; Mark : Lib_Mark_Type); -- Store Dir in name table and set lib mark as name info to identify -- Ada libraries. Output_Is_Object : Boolean := True; -- Set to False when using a switch -S for the compiler procedure Check_For_S_Switch; -- Set Output_Is_Object to False when the -S switch is used for the -- compiler. function Switches_Of (Source_File : Name_Id; Source_File_Name : String; Source_Index : Int; Naming : Naming_Data; In_Package : Package_Id; Allow_ALI : Boolean) return Variable_Value; -- Return the switches for the source file in the specified package -- of a project file. If the Source_File ends with a standard GNAT -- extension (".ads" or ".adb"), try first the full name, then the -- name without the extension, then, if Allow_ALI is True, the name with -- the extension ".ali". If there is no switches for either names, try the -- default switches for Ada. If all failed, return No_Variable_Value. function Is_In_Object_Directory (Source_File : File_Name_Type; Full_Lib_File : File_Name_Type) return Boolean; -- Check if, when using a project file, the ALI file is in the project -- directory of the ultimate extending project. If it is not, we ignore -- the fact that this ALI file is read-only. ---------------------------------------------------- -- Compiler, Binder & Linker Data and Subprograms -- ---------------------------------------------------- Gcc : String_Access := Program_Name ("gcc"); Gnatbind : String_Access := Program_Name ("gnatbind"); Gnatlink : String_Access := Program_Name ("gnatlink"); -- Default compiler, binder, linker programs Saved_Gcc : String_Access := null; Saved_Gnatbind : String_Access := null; Saved_Gnatlink : String_Access := null; -- Given by the command line. Will be used, if non null Gcc_Path : String_Access := GNAT.OS_Lib.Locate_Exec_On_Path (Gcc.all); Gnatbind_Path : String_Access := GNAT.OS_Lib.Locate_Exec_On_Path (Gnatbind.all); Gnatlink_Path : String_Access := GNAT.OS_Lib.Locate_Exec_On_Path (Gnatlink.all); -- Path for compiler, binder, linker programs, defaulted now for gnatdist. -- Changed later if overridden on command line. Comp_Flag : constant String_Access := new String'("-c"); Output_Flag : constant String_Access := new String'("-o"); Ada_Flag_1 : constant String_Access := new String'("-x"); Ada_Flag_2 : constant String_Access := new String'("ada"); No_gnat_adc : constant String_Access := new String'("-gnatA"); GNAT_Flag : constant String_Access := new String'("-gnatpg"); Do_Not_Check_Flag : constant String_Access := new String'("-x"); Object_Suffix : constant String := Get_Object_Suffix.all; Executable_Suffix : constant String := Get_Executable_Suffix.all; Syntax_Only : Boolean := False; -- Set to True when compiling with -gnats Display_Executed_Programs : Boolean := True; -- Set to True if name of commands should be output on stderr Output_File_Name_Seen : Boolean := False; -- Set to True after having scanned the file_name for -- switch "-o file_name" Object_Directory_Seen : Boolean := False; -- Set to True after having scanned the object directory for -- switch "-D obj_dir". Object_Directory_Path : String_Access := null; -- The path name of the object directory, set with switch -D type Make_Program_Type is (None, Compiler, Binder, Linker); Program_Args : Make_Program_Type := None; -- Used to indicate if we are scanning gnatmake, gcc, gnatbind, or gnatbind -- options within the gnatmake command line. Used in Scan_Make_Arg only, -- but must be global since value preserved from one call to another. Temporary_Config_File : Boolean := False; -- Set to True when there is a temporary config file used for a project -- file, to avoid displaying the -gnatec switch for a temporary file. procedure Add_Switches (The_Package : Package_Id; File_Name : String; Index : Int; Program : Make_Program_Type); procedure Add_Switch (S : String_Access; Program : Make_Program_Type; Append_Switch : Boolean := True; And_Save : Boolean := True); procedure Add_Switch (S : String; Program : Make_Program_Type; Append_Switch : Boolean := True; And_Save : Boolean := True); -- Make invokes one of three programs (the compiler, the binder or the -- linker). For the sake of convenience, some program specific switches -- can be passed directly on the gnatmake commande line. This procedure -- records these switches so that gnamake can pass them to the right -- program. S is the switch to be added at the end of the command line -- for Program if Append_Switch is True. If Append_Switch is False S is -- added at the beginning of the command line. procedure Check (Source_File : File_Name_Type; Source_Index : Int; The_Args : Argument_List; Lib_File : File_Name_Type; Read_Only : Boolean; ALI : out ALI_Id; O_File : out File_Name_Type; O_Stamp : out Time_Stamp_Type); -- Determines whether the library file Lib_File is up-to-date or not. The -- full name (with path information) of the object file corresponding to -- Lib_File is returned in O_File. Its time stamp is saved in O_Stamp. -- ALI is the ALI_Id corresponding to Lib_File. If Lib_File in not -- up-to-date, then the corresponding source file needs to be recompiled. -- In this case ALI = No_ALI_Id. procedure Check_Linker_Options (E_Stamp : Time_Stamp_Type; O_File : out File_Name_Type; O_Stamp : out Time_Stamp_Type); -- Checks all linker options for linker files that are newer -- than E_Stamp. If such objects are found, the youngest object -- is returned in O_File and its stamp in O_Stamp. -- -- If no obsolete linker files were found, the first missing -- linker file is returned in O_File and O_Stamp is empty. -- Otherwise O_File is No_File. procedure Collect_Arguments (Source_File : File_Name_Type; Source_Index : Int; Args : Argument_List); -- Collect all arguments for a source to be compiled, including those -- that come from a project file. procedure Display (Program : String; Args : Argument_List); -- Displays Program followed by the arguments in Args if variable -- Display_Executed_Programs is set. The lower bound of Args must be 1. ----------------- -- Mapping files ----------------- type Temp_File_Names is array (Project_Id range <>, Positive range <>) of Name_Id; type Temp_Files_Ptr is access Temp_File_Names; type Indices is array (Project_Id range <>) of Natural; type Indices_Ptr is access Indices; type Free_File_Indices is array (Project_Id range <>, Positive range <>) of Positive; type Free_Indices_Ptr is access Free_File_Indices; The_Mapping_File_Names : Temp_Files_Ptr; -- For each project, the name ids of the temporary mapping files used Last_Mapping_File_Names : Indices_Ptr; -- For each project, the index of the last mapping file created The_Free_Mapping_File_Indices : Free_Indices_Ptr; -- For each project, the indices in The_Mapping_File_Names of the mapping -- file names that can be reused for subsequent compilations. Last_Free_Indices : Indices_Ptr; -- For each project, the number of mapping files that can be reused Gnatmake_Mapping_File : String_Access := null; -- The path name of a mapping file specified by switch -C= procedure Delete_Mapping_Files; -- Delete all temporary mapping files procedure Init_Mapping_File (Project : Project_Id; File_Index : in out Natural); -- Create a new temporary mapping file, and fill it with the project file -- mappings, when using project file(s). The out parameter File_Index is -- the index to the name of the file in the array The_Mapping_File_Names. procedure Delete_Temp_Config_Files; -- Delete all temporary config files procedure Delete_All_Temp_Files; -- Delete all temp files (config files, mapping files, path files) ------------------- -- Add_Arguments -- ------------------- procedure Add_Arguments (Args : Argument_List) is begin if Arguments = null then Arguments := new Argument_List (1 .. Args'Length + 10); else while Last_Argument + Args'Length > Arguments'Last loop declare New_Arguments : constant Argument_List_Access := new Argument_List (1 .. Arguments'Last * 2); begin New_Arguments (1 .. Last_Argument) := Arguments (1 .. Last_Argument); Arguments := New_Arguments; end; end loop; end if; Arguments (Last_Argument + 1 .. Last_Argument + Args'Length) := Args; Last_Argument := Last_Argument + Args'Length; end Add_Arguments; -------------------- -- Add_Dependency -- -------------------- procedure Add_Dependency (S : Name_Id; On : Name_Id) is begin Dependencies.Increment_Last; Dependencies.Table (Dependencies.Last) := (S, On); end Add_Dependency; -------------------- -- Add_Object_Dir -- -------------------- procedure Add_Object_Dir (N : String) is begin Add_Lib_Search_Dir (N); if Verbose_Mode then Write_Str ("Adding object directory """); Write_Str (N); Write_Str ("""."); Write_Eol; end if; end Add_Object_Dir; -------------------- -- Add_Source_Dir -- -------------------- procedure Add_Source_Dir (N : String) is begin Add_Src_Search_Dir (N); if Verbose_Mode then Write_Str ("Adding source directory """); Write_Str (N); Write_Str ("""."); Write_Eol; end if; end Add_Source_Dir; ---------------- -- Add_Switch -- ---------------- procedure Add_Switch (S : String_Access; Program : Make_Program_Type; Append_Switch : Boolean := True; And_Save : Boolean := True) is generic with package T is new Table.Table (<>); procedure Generic_Position (New_Position : out Integer); -- Generic procedure that chooses a position for S in T at the -- beginning or the end, depending on the boolean Append_Switch. -- Calling this procedure may expand the table. ---------------------- -- Generic_Position -- ---------------------- procedure Generic_Position (New_Position : out Integer) is begin T.Increment_Last; if Append_Switch then New_Position := Integer (T.Last); else for J in reverse T.Table_Index_Type'Succ (T.First) .. T.Last loop T.Table (J) := T.Table (T.Table_Index_Type'Pred (J)); end loop; New_Position := Integer (T.First); end if; end Generic_Position; procedure Gcc_Switches_Pos is new Generic_Position (Gcc_Switches); procedure Binder_Switches_Pos is new Generic_Position (Binder_Switches); procedure Linker_Switches_Pos is new Generic_Position (Linker_Switches); procedure Saved_Gcc_Switches_Pos is new Generic_Position (Saved_Gcc_Switches); procedure Saved_Binder_Switches_Pos is new Generic_Position (Saved_Binder_Switches); procedure Saved_Linker_Switches_Pos is new Generic_Position (Saved_Linker_Switches); New_Position : Integer; -- Start of processing for Add_Switch begin if And_Save then case Program is when Compiler => Saved_Gcc_Switches_Pos (New_Position); Saved_Gcc_Switches.Table (New_Position) := S; when Binder => Saved_Binder_Switches_Pos (New_Position); Saved_Binder_Switches.Table (New_Position) := S; when Linker => Saved_Linker_Switches_Pos (New_Position); Saved_Linker_Switches.Table (New_Position) := S; when None => raise Program_Error; end case; else case Program is when Compiler => Gcc_Switches_Pos (New_Position); Gcc_Switches.Table (New_Position) := S; when Binder => Binder_Switches_Pos (New_Position); Binder_Switches.Table (New_Position) := S; when Linker => Linker_Switches_Pos (New_Position); Linker_Switches.Table (New_Position) := S; when None => raise Program_Error; end case; end if; end Add_Switch; procedure Add_Switch (S : String; Program : Make_Program_Type; Append_Switch : Boolean := True; And_Save : Boolean := True) is begin Add_Switch (S => new String'(S), Program => Program, Append_Switch => Append_Switch, And_Save => And_Save); end Add_Switch; ------------------ -- Add_Switches -- ------------------ procedure Add_Switches (The_Package : Package_Id; File_Name : String; Index : Int; Program : Make_Program_Type) is Switches : Variable_Value; Switch_List : String_List_Id; Element : String_Element; begin if File_Name'Length > 0 then Name_Len := File_Name'Length; Name_Buffer (1 .. Name_Len) := File_Name; Switches := Switches_Of (Source_File => Name_Find, Source_File_Name => File_Name, Source_Index => Index, Naming => Projects.Table (Main_Project).Naming, In_Package => The_Package, Allow_ALI => Program = Binder or else Program = Linker); case Switches.Kind is when Undefined => null; when List => Program_Args := Program; Switch_List := Switches.Values; while Switch_List /= Nil_String loop Element := String_Elements.Table (Switch_List); Get_Name_String (Element.Value); if Name_Len > 0 then declare Argv : constant String := Name_Buffer (1 .. Name_Len); -- We need a copy, because Name_Buffer may be -- modified. begin if Verbose_Mode then Write_Str (" Adding "); Write_Line (Argv); end if; Scan_Make_Arg (Argv, And_Save => False); end; end if; Switch_List := Element.Next; end loop; when Single => Program_Args := Program; Get_Name_String (Switches.Value); if Name_Len > 0 then declare Argv : constant String := Name_Buffer (1 .. Name_Len); -- We need a copy, because Name_Buffer may be modified begin if Verbose_Mode then Write_Str (" Adding "); Write_Line (Argv); end if; Scan_Make_Arg (Argv, And_Save => False); end; end if; end case; end if; end Add_Switches; ---------- -- Bind -- ---------- procedure Bind (ALI_File : File_Name_Type; Args : Argument_List) is Bind_Args : Argument_List (1 .. Args'Last + 2); Bind_Last : Integer; Success : Boolean; begin pragma Assert (Args'First = 1); -- Optimize the simple case where the gnatbind command line looks like -- gnatbind -aO. -I- file.ali --into-> gnatbind file.adb if Args'Length = 2 and then Args (Args'First).all = "-aO" & Normalized_CWD and then Args (Args'Last).all = "-I-" and then ALI_File = Strip_Directory (ALI_File) then Bind_Last := Args'First - 1; else Bind_Last := Args'Last; Bind_Args (Args'Range) := Args; end if; -- It is completely pointless to re-check source file time stamps. -- This has been done already by gnatmake Bind_Last := Bind_Last + 1; Bind_Args (Bind_Last) := Do_Not_Check_Flag; Get_Name_String (ALI_File); Bind_Last := Bind_Last + 1; Bind_Args (Bind_Last) := new String'(Name_Buffer (1 .. Name_Len)); GNAT.OS_Lib.Normalize_Arguments (Bind_Args (Args'First .. Bind_Last)); Display (Gnatbind.all, Bind_Args (Args'First .. Bind_Last)); if Gnatbind_Path = null then Make_Failed ("error, unable to locate ", Gnatbind.all); end if; GNAT.OS_Lib.Spawn (Gnatbind_Path.all, Bind_Args (Args'First .. Bind_Last), Success); if not Success then raise Bind_Failed; end if; end Bind; -------------------------------- -- Change_To_Object_Directory -- -------------------------------- procedure Change_To_Object_Directory (Project : Project_Id) is begin -- Nothing to do if the current working directory is alresdy the one -- we want. if Project_Object_Directory /= Project then Project_Object_Directory := Project; -- If in a real project, set the working directory to the object -- directory of the project. if Project /= No_Project then Change_Dir (Get_Name_String (Projects.Table (Project).Object_Directory)); -- Otherwise, for sources outside of any project, set the working -- directory to the object directory of the main project. elsif Main_Project /= No_Project then Change_Dir (Get_Name_String (Projects.Table (Main_Project).Object_Directory)); end if; end if; end Change_To_Object_Directory; ----------- -- Check -- ----------- procedure Check (Source_File : File_Name_Type; Source_Index : Int; The_Args : Argument_List; Lib_File : File_Name_Type; Read_Only : Boolean; ALI : out ALI_Id; O_File : out File_Name_Type; O_Stamp : out Time_Stamp_Type) is function First_New_Spec (A : ALI_Id) return File_Name_Type; -- Looks in the with table entries of A and returns the spec file name -- of the first withed unit (subprogram) for which no spec existed when -- A was generated but for which there exists one now, implying that A -- is now obsolete. If no such unit is found No_File is returned. -- Otherwise the spec file name of the unit is returned. -- -- **WARNING** in the event of Uname format modifications, one *MUST* -- make sure this function is also updated. -- -- Note: This function should really be in ali.adb and use Uname -- services, but this causes the whole compiler to be dragged along -- for gnatbind and gnatmake. -------------------- -- First_New_Spec -- -------------------- function First_New_Spec (A : ALI_Id) return File_Name_Type is Spec_File_Name : File_Name_Type := No_File; function New_Spec (Uname : Unit_Name_Type) return Boolean; -- Uname is the name of the spec or body of some ada unit. -- This function returns True if the Uname is the name of a body -- which has a spec not mentioned inali file A. If True is returned -- Spec_File_Name above is set to the name of this spec file. -------------- -- New_Spec -- -------------- function New_Spec (Uname : Unit_Name_Type) return Boolean is Spec_Name : Unit_Name_Type; File_Name : File_Name_Type; begin -- Test whether Uname is the name of a body unit (ie ends with %b) Get_Name_String (Uname); pragma Assert (Name_Len > 2 and then Name_Buffer (Name_Len - 1) = '%'); if Name_Buffer (Name_Len) /= 'b' then return False; end if; -- Convert unit name into spec name -- ??? this code seems dubious in presence of pragma -- Source_File_Name since there is no more direct relationship -- between unit name and file name. -- ??? Further, what about alternative subunit naming Name_Buffer (Name_Len) := 's'; Spec_Name := Name_Find; File_Name := Get_File_Name (Spec_Name, Subunit => False); -- Look if File_Name is mentioned in A's sdep list. -- If not look if the file exists. If it does return True. for D in ALIs.Table (A).First_Sdep .. ALIs.Table (A).Last_Sdep loop if Sdep.Table (D).Sfile = File_Name then return False; end if; end loop; if Full_Source_Name (File_Name) /= No_File then Spec_File_Name := File_Name; return True; end if; return False; end New_Spec; -- Start of processing for First_New_Spec begin U_Chk : for U in ALIs.Table (A).First_Unit .. ALIs.Table (A).Last_Unit loop exit U_Chk when Units.Table (U).Utype = Is_Body_Only and then New_Spec (Units.Table (U).Uname); for W in Units.Table (U).First_With .. Units.Table (U).Last_With loop exit U_Chk when Withs.Table (W).Afile /= No_File and then New_Spec (Withs.Table (W).Uname); end loop; end loop U_Chk; return Spec_File_Name; end First_New_Spec; --------------------------------- -- Data declarations for Check -- --------------------------------- Full_Lib_File : File_Name_Type; -- Full name of current library file Full_Obj_File : File_Name_Type; -- Full name of the object file corresponding to Lib_File Lib_Stamp : Time_Stamp_Type; -- Time stamp of the current ada library file Obj_Stamp : Time_Stamp_Type; -- Time stamp of the current object file Modified_Source : File_Name_Type; -- The first source in Lib_File whose current time stamp differs -- from that stored in Lib_File. New_Spec : File_Name_Type; -- If Lib_File contains in its W (with) section a body (for a -- subprogram) for which there exists a spec and the spec did not -- appear in the Sdep section of Lib_File, New_Spec contains the file -- name of this new spec. Source_Name : Name_Id; Text : Text_Buffer_Ptr; Prev_Switch : String_Access; -- Previous switch processed Arg : Arg_Id := Arg_Id'First; -- Current index in Args.Table for a given unit (init to stop warning) Switch_Found : Boolean; -- True if a given switch has been found -- Start of processing for Check begin pragma Assert (Lib_File /= No_File); -- If the ALI file is read-only, set temporarily -- Check_Object_Consistency to False: we don't care if the object file -- is not there; presumably, a library will be used for linking. if Read_Only then declare Saved_Check_Object_Consistency : constant Boolean := Check_Object_Consistency; begin Check_Object_Consistency := False; Text := Read_Library_Info (Lib_File); Check_Object_Consistency := Saved_Check_Object_Consistency; end; else Text := Read_Library_Info (Lib_File); end if; Full_Lib_File := Full_Library_Info_Name; Full_Obj_File := Full_Object_File_Name; Lib_Stamp := Current_Library_File_Stamp; Obj_Stamp := Current_Object_File_Stamp; if Full_Lib_File = No_File then Verbose_Msg (Lib_File, "being checked ...", Prefix => " "); else Verbose_Msg (Full_Lib_File, "being checked ...", Prefix => " "); end if; ALI := No_ALI_Id; O_File := Full_Obj_File; O_Stamp := Obj_Stamp; if Text = null then if Full_Lib_File = No_File then Verbose_Msg (Lib_File, "missing."); elsif Obj_Stamp (Obj_Stamp'First) = ' ' then Verbose_Msg (Full_Obj_File, "missing."); else Verbose_Msg (Full_Lib_File, "(" & String (Lib_Stamp) & ") newer than", Full_Obj_File, "(" & String (Obj_Stamp) & ")"); end if; else ALI := Scan_ALI (Lib_File, Text, Ignore_ED => False, Err => True); Free (Text); if ALI = No_ALI_Id then Verbose_Msg (Full_Lib_File, "incorrectly formatted ALI file"); return; elsif ALIs.Table (ALI).Ver (1 .. ALIs.Table (ALI).Ver_Len) /= Verbose_Library_Version then Verbose_Msg (Full_Lib_File, "compiled with old GNAT version"); ALI := No_ALI_Id; return; end if; -- Don't take Ali file into account if it was generated with -- errors. if ALIs.Table (ALI).Compile_Errors then Verbose_Msg (Full_Lib_File, "had errors, must be recompiled"); ALI := No_ALI_Id; return; end if; -- Don't take Ali file into account if it was generated without -- object. if Operating_Mode /= Check_Semantics and then ALIs.Table (ALI).No_Object then Verbose_Msg (Full_Lib_File, "has no corresponding object"); ALI := No_ALI_Id; return; end if; -- Check for matching compiler switches if needed if Check_Switches then -- First, collect all the switches Collect_Arguments (Source_File, Source_Index, The_Args); Prev_Switch := Dummy_Switch; Get_Name_String (ALIs.Table (ALI).Sfile); Switches_To_Check.Set_Last (0); for J in 1 .. Last_Argument loop -- Skip non switches -c, -I and -o switches if Arguments (J) (1) = '-' and then Arguments (J) (2) /= 'c' and then Arguments (J) (2) /= 'o' and then Arguments (J) (2) /= 'I' then Normalize_Compiler_Switches (Arguments (J).all, Normalized_Switches, Last_Norm_Switch); for K in 1 .. Last_Norm_Switch loop Switches_To_Check.Increment_Last; Switches_To_Check.Table (Switches_To_Check.Last) := Normalized_Switches (K); end loop; end if; end loop; for J in 1 .. Switches_To_Check.Last loop -- Comparing switches is delicate because gcc reorders -- a number of switches, according to lang-specs.h, but -- gnatmake doesn't have the sufficient knowledge to -- perform the same reordering. Instead, we ignore orders -- between different "first letter" switches, but keep -- orders between same switches, e.g -O -O2 is different -- than -O2 -O, but -g -O is equivalent to -O -g. if Switches_To_Check.Table (J) (2) /= Prev_Switch (2) or else (Prev_Switch'Length >= 6 and then Prev_Switch (2 .. 5) = "gnat" and then Switches_To_Check.Table (J)'Length >= 6 and then Switches_To_Check.Table (J) (2 .. 5) = "gnat" and then Prev_Switch (6) /= Switches_To_Check.Table (J) (6)) then Prev_Switch := Switches_To_Check.Table (J); Arg := Units.Table (ALIs.Table (ALI).First_Unit).First_Arg; end if; Switch_Found := False; for K in Arg .. Units.Table (ALIs.Table (ALI).First_Unit).Last_Arg loop if Switches_To_Check.Table (J).all = Args.Table (K).all then Arg := K + 1; Switch_Found := True; exit; end if; end loop; if not Switch_Found then if Verbose_Mode then Verbose_Msg (ALIs.Table (ALI).Sfile, "switch mismatch """ & Switches_To_Check.Table (J).all & '"'); end if; ALI := No_ALI_Id; return; end if; end loop; if Switches_To_Check.Last /= Integer (Units.Table (ALIs.Table (ALI).First_Unit).Last_Arg - Units.Table (ALIs.Table (ALI).First_Unit).First_Arg + 1) then if Verbose_Mode then Verbose_Msg (ALIs.Table (ALI).Sfile, "different number of switches"); for K in Units.Table (ALIs.Table (ALI).First_Unit).First_Arg .. Units.Table (ALIs.Table (ALI).First_Unit).Last_Arg loop Write_Str (Args.Table (K).all); Write_Char (' '); end loop; Write_Eol; for J in 1 .. Switches_To_Check.Last loop Write_Str (Switches_To_Check.Table (J).all); Write_Char (' '); end loop; Write_Eol; end if; ALI := No_ALI_Id; return; end if; end if; -- Get the source files and their message digests. Note that some -- sources may be missing if ALI is out-of-date. Set_Source_Table (ALI); Modified_Source := Time_Stamp_Mismatch (ALI, Read_Only); if Modified_Source /= No_File then ALI := No_ALI_Id; if Verbose_Mode then Source_Name := Full_Source_Name (Modified_Source); if Source_Name /= No_File then Verbose_Msg (Source_Name, "time stamp mismatch"); else Verbose_Msg (Modified_Source, "missing"); end if; end if; else New_Spec := First_New_Spec (ALI); if New_Spec /= No_File then ALI := No_ALI_Id; if Verbose_Mode then Source_Name := Full_Source_Name (New_Spec); if Source_Name /= No_File then Verbose_Msg (Source_Name, "new spec"); else Verbose_Msg (New_Spec, "old spec missing"); end if; end if; end if; end if; end if; end Check; ------------------------ -- Check_For_S_Switch -- ------------------------ procedure Check_For_S_Switch is begin -- By default, we generate an object file Output_Is_Object := True; for Arg in 1 .. Last_Argument loop if Arguments (Arg).all = "-S" then Output_Is_Object := False; elsif Arguments (Arg).all = "-c" then Output_Is_Object := True; end if; end loop; end Check_For_S_Switch; -------------------------- -- Check_Linker_Options -- -------------------------- procedure Check_Linker_Options (E_Stamp : Time_Stamp_Type; O_File : out File_Name_Type; O_Stamp : out Time_Stamp_Type) is procedure Check_File (File : File_Name_Type); -- Update O_File and O_Stamp if the given file is younger than E_Stamp -- and O_Stamp, or if O_File is No_File and File does not exist. function Get_Library_File (Name : String) return File_Name_Type; -- Return the full file name including path of a library based -- on the name specified with the -l linker option, using the -- Ada object path. Return No_File if no such file can be found. type Char_Array is array (Natural) of Character; type Char_Array_Access is access constant Char_Array; Template : Char_Array_Access; pragma Import (C, Template, "__gnat_library_template"); ---------------- -- Check_File -- ---------------- procedure Check_File (File : File_Name_Type) is Stamp : Time_Stamp_Type; Name : File_Name_Type := File; begin Get_Name_String (Name); -- Remove any trailing NUL characters while Name_Len >= Name_Buffer'First and then Name_Buffer (Name_Len) = NUL loop Name_Len := Name_Len - 1; end loop; if Name_Len <= 0 then return; elsif Name_Buffer (1) = '-' then -- Do not check if File is a switch other than "-l" if Name_Buffer (2) /= 'l' then return; end if; -- The argument is a library switch, get actual name. It -- is necessary to make a copy of the relevant part of -- Name_Buffer as Get_Library_Name uses Name_Buffer as well. declare Base_Name : constant String := Name_Buffer (3 .. Name_Len); begin Name := Get_Library_File (Base_Name); end; if Name = No_File then return; end if; end if; Stamp := File_Stamp (Name); -- Find the youngest object file that is younger than the -- executable. If no such file exist, record the first object -- file that is not found. if (O_Stamp < Stamp and then E_Stamp < Stamp) or else (O_File = No_File and then Stamp (Stamp'First) = ' ') then O_Stamp := Stamp; O_File := Name; -- Strip the trailing NUL if present Get_Name_String (O_File); if Name_Buffer (Name_Len) = NUL then Name_Len := Name_Len - 1; O_File := Name_Find; end if; end if; end Check_File; ---------------------- -- Get_Library_Name -- ---------------------- -- See comments in a-adaint.c about template syntax function Get_Library_File (Name : String) return File_Name_Type is File : File_Name_Type := No_File; begin Name_Len := 0; for Ptr in Template'Range loop case Template (Ptr) is when '*' => Add_Str_To_Name_Buffer (Name); when ';' => File := Full_Lib_File_Name (Name_Find); exit when File /= No_File; Name_Len := 0; when NUL => exit; when others => Add_Char_To_Name_Buffer (Template (Ptr)); end case; end loop; -- The for loop exited because the end of the template -- was reached. File contains the last possible file name -- for the library. if File = No_File and then Name_Len > 0 then File := Full_Lib_File_Name (Name_Find); end if; return File; end Get_Library_File; -- Start of processing for Check_Linker_Options begin O_File := No_File; O_Stamp := (others => ' '); -- Process linker options from the ALI files for Opt in 1 .. Linker_Options.Last loop Check_File (Linker_Options.Table (Opt).Name); end loop; -- Process options given on the command line for Opt in Linker_Switches.First .. Linker_Switches.Last loop -- Check if the previous Opt has one of the two switches -- that take an extra parameter. (See GCC manual.) if Opt = Linker_Switches.First or else (Linker_Switches.Table (Opt - 1).all /= "-u" and then Linker_Switches.Table (Opt - 1).all /= "-Xlinker" and then Linker_Switches.Table (Opt - 1).all /= "-L") then Name_Len := 0; Add_Str_To_Name_Buffer (Linker_Switches.Table (Opt).all); Check_File (Name_Find); end if; end loop; end Check_Linker_Options; ----------------- -- Check_Steps -- ----------------- procedure Check_Steps is begin -- If either -c, -b or -l has been specified, we will not necessarily -- execute all steps. if Make_Steps then Do_Compile_Step := Do_Compile_Step and Compile_Only; Do_Bind_Step := Do_Bind_Step and Bind_Only; Do_Link_Step := Do_Link_Step and Link_Only; -- If -c has been specified, but not -b, ignore any potential -l if Do_Compile_Step and then not Do_Bind_Step then Do_Link_Step := False; end if; end if; end Check_Steps; ----------------------- -- Collect_Arguments -- ----------------------- procedure Collect_Arguments (Source_File : File_Name_Type; Source_Index : Int; Args : Argument_List) is begin Arguments_Collected := True; Arguments_Project := No_Project; Last_Argument := 0; Add_Arguments (Args); if Main_Project /= No_Project then declare Source_File_Name : constant String := Get_Name_String (Source_File); Compiler_Package : Prj.Package_Id; Switches : Prj.Variable_Value; Data : Project_Data; begin Prj.Env. Get_Reference (Source_File_Name => Source_File_Name, Project => Arguments_Project, Path => Arguments_Path_Name); -- If the source is not a source of a project file, check if -- this is allowed. if Arguments_Project = No_Project then if not External_Unit_Compilation_Allowed then Make_Failed ("external source (", Source_File_Name, ") is not part of any project; cannot be " & "compiled without gnatmake switch -x"); end if; -- If it is allowed, simply add the saved gcc switches Add_Arguments (The_Saved_Gcc_Switches.all); else -- We get the project directory for the relative path -- switches and arguments. Data := Projects.Table (Arguments_Project); -- If the source is in an extended project, we go to -- the ultimate extending project. while Data.Extended_By /= No_Project loop Arguments_Project := Data.Extended_By; Data := Projects.Table (Arguments_Project); end loop; -- If building a dynamic or relocatable library, compile with -- PIC option, if it exists. if Data.Library and then Data.Library_Kind /= Static then declare PIC : constant String := MLib.Tgt.PIC_Option; begin if PIC /= "" then Add_Arguments ((1 => new String'(PIC))); end if; end; end if; if Data.Dir_Path = null then Data.Dir_Path := new String'(Get_Name_String (Data.Display_Directory)); Projects.Table (Arguments_Project) := Data; end if; -- We now look for package Compiler -- and get the switches from this package. Compiler_Package := Prj.Util.Value_Of (Name => Name_Compiler, In_Packages => Data.Decl.Packages); if Compiler_Package /= No_Package then -- If package Gnatmake.Compiler exists, we get -- the specific switches for the current source, -- or the global switches, if any. Switches := Switches_Of (Source_File => Source_File, Source_File_Name => Source_File_Name, Source_Index => Source_Index, Naming => Data.Naming, In_Package => Compiler_Package, Allow_ALI => False); end if; case Switches.Kind is -- We have a list of switches. We add these switches, -- plus the saved gcc switches. when List => declare Current : String_List_Id := Switches.Values; Element : String_Element; Number : Natural := 0; begin while Current /= Nil_String loop Element := String_Elements.Table (Current); Number := Number + 1; Current := Element.Next; end loop; declare New_Args : Argument_List (1 .. Number); begin Current := Switches.Values; for Index in New_Args'Range loop Element := String_Elements.Table (Current); Get_Name_String (Element.Value); New_Args (Index) := new String'(Name_Buffer (1 .. Name_Len)); Test_If_Relative_Path (New_Args (Index), Parent => Data.Dir_Path); Current := Element.Next; end loop; Add_Arguments (Configuration_Pragmas_Switch (Arguments_Project) & New_Args & The_Saved_Gcc_Switches.all); end; end; -- We have a single switch. We add this switch, -- plus the saved gcc switches. when Single => Get_Name_String (Switches.Value); declare New_Args : Argument_List := (1 => new String' (Name_Buffer (1 .. Name_Len))); begin Test_If_Relative_Path (New_Args (1), Parent => Data.Dir_Path); Add_Arguments (Configuration_Pragmas_Switch (Arguments_Project) & New_Args & The_Saved_Gcc_Switches.all); end; -- We have no switches from Gnatmake.Compiler. -- We add the saved gcc switches. when Undefined => Add_Arguments (Configuration_Pragmas_Switch (Arguments_Project) & The_Saved_Gcc_Switches.all); end case; end if; end; end if; -- Set Output_Is_Object, depending if there is a -S switch. -- If the bind step is not performed, and there is a -S switch, -- then we will not check for a valid object file. Check_For_S_Switch; end Collect_Arguments; --------------------- -- Compile_Sources -- --------------------- procedure Compile_Sources (Main_Source : File_Name_Type; Args : Argument_List; First_Compiled_File : out Name_Id; Most_Recent_Obj_File : out Name_Id; Most_Recent_Obj_Stamp : out Time_Stamp_Type; Main_Unit : out Boolean; Compilation_Failures : out Natural; Main_Index : Int := 0; Check_Readonly_Files : Boolean := False; Do_Not_Execute : Boolean := False; Force_Compilations : Boolean := False; Keep_Going : Boolean := False; In_Place_Mode : Boolean := False; Initialize_ALI_Data : Boolean := True; Max_Process : Positive := 1) is No_Mapping_File : constant Natural := 0; type Compilation_Data is record Pid : Process_Id; Full_Source_File : File_Name_Type; Lib_File : File_Name_Type; Source_Unit : Unit_Name_Type; Mapping_File : Natural := No_Mapping_File; Project : Project_Id := No_Project; Syntax_Only : Boolean := False; Output_Is_Object : Boolean := True; end record; Running_Compile : array (1 .. Max_Process) of Compilation_Data; -- Used to save information about outstanding compilations Outstanding_Compiles : Natural := 0; -- Current number of outstanding compiles Source_Unit : Unit_Name_Type; -- Current source unit Source_File : File_Name_Type; -- Current source file Full_Source_File : File_Name_Type; -- Full name of the current source file Lib_File : File_Name_Type; -- Current library file Full_Lib_File : File_Name_Type; -- Full name of the current library file Obj_File : File_Name_Type; -- Full name of the object file corresponding to Lib_File Obj_Stamp : Time_Stamp_Type; -- Time stamp of the current object file Sfile : File_Name_Type; -- Contains the source file of the units withed by Source_File ALI : ALI_Id; -- ALI Id of the current ALI file -- Comment following declarations ??? Read_Only : Boolean := False; Compilation_OK : Boolean; Need_To_Compile : Boolean; Pid : Process_Id; Text : Text_Buffer_Ptr; Mfile : Natural := No_Mapping_File; Need_To_Check_Standard_Library : Boolean := Check_Readonly_Files and not Unique_Compile; Mapping_File_Arg : String_Access; Process_Created : Boolean := False; procedure Add_Process (Pid : Process_Id; Sfile : File_Name_Type; Afile : File_Name_Type; Uname : Unit_Name_Type; Mfile : Natural := No_Mapping_File); -- Adds process Pid to the current list of outstanding compilation -- processes and record the full name of the source file Sfile that -- we are compiling, the name of its library file Afile and the -- name of its unit Uname. If Mfile is not equal to No_Mapping_File, -- it is the index of the mapping file used during compilation in the -- array The_Mapping_File_Names. procedure Await_Compile (Sfile : out File_Name_Type; Afile : out File_Name_Type; Uname : out Unit_Name_Type; OK : out Boolean); -- Awaits that an outstanding compilation process terminates. When -- it does set Sfile to the name of the source file that was compiled -- Afile to the name of its library file and Uname to the name of its -- unit. Note that this time stamp can be used to check whether the -- compilation did generate an object file. OK is set to True if the -- compilation succeeded. Note that Sfile, Afile and Uname could be -- resp. No_File, No_File and No_Name if there were no compilations -- to wait for. function Bad_Compilation_Count return Natural; -- Returns the number of compilation failures procedure Check_Standard_Library; -- Check if s-stalib.adb needs to be compiled procedure Collect_Arguments_And_Compile (Source_File : File_Name_Type; Source_Index : Int); -- Collect arguments from project file (if any) and compile function Compile (S : Name_Id; L : Name_Id; Source_Index : Int; Args : Argument_List) return Process_Id; -- Compiles S using Args. If S is a GNAT predefined source -- "-gnatpg" is added to Args. Non blocking call. L corresponds to the -- expected library file name. Process_Id of the process spawned to -- execute the compile. package Good_ALI is new Table.Table ( Table_Component_Type => ALI_Id, Table_Index_Type => Natural, Table_Low_Bound => 1, Table_Initial => 50, Table_Increment => 100, Table_Name => "Make.Good_ALI"); -- Contains the set of valid ALI files that have not yet been scanned function Good_ALI_Present return Boolean; -- Returns True if any ALI file was recorded in the previous set procedure Get_Mapping_File (Project : Project_Id); -- Get a mapping file name. If there is one to be reused, reuse it. -- Otherwise, create a new mapping file. function Get_Next_Good_ALI return ALI_Id; -- Returns the next good ALI_Id record procedure Record_Failure (File : File_Name_Type; Unit : Unit_Name_Type; Found : Boolean := True); -- Records in the previous table that the compilation for File failed. -- If Found is False then the compilation of File failed because we -- could not find it. Records also Unit when possible. procedure Record_Good_ALI (A : ALI_Id); -- Records in the previous set the Id of an ALI file ----------------- -- Add_Process -- ----------------- procedure Add_Process (Pid : Process_Id; Sfile : File_Name_Type; Afile : File_Name_Type; Uname : Unit_Name_Type; Mfile : Natural := No_Mapping_File) is OC1 : constant Positive := Outstanding_Compiles + 1; begin pragma Assert (OC1 <= Max_Process); pragma Assert (Pid /= Invalid_Pid); Running_Compile (OC1).Pid := Pid; Running_Compile (OC1).Full_Source_File := Sfile; Running_Compile (OC1).Lib_File := Afile; Running_Compile (OC1).Source_Unit := Uname; Running_Compile (OC1).Mapping_File := Mfile; Running_Compile (OC1).Project := Arguments_Project; Running_Compile (OC1).Syntax_Only := Syntax_Only; Running_Compile (OC1).Output_Is_Object := Output_Is_Object; Outstanding_Compiles := OC1; end Add_Process; -------------------- -- Await_Compile -- ------------------- procedure Await_Compile (Sfile : out File_Name_Type; Afile : out File_Name_Type; Uname : out File_Name_Type; OK : out Boolean) is Pid : Process_Id; Project : Project_Id; begin pragma Assert (Outstanding_Compiles > 0); Sfile := No_File; Afile := No_File; Uname := No_Name; OK := False; -- The loop here is a work-around for a problem on VMS; in some -- circumstances (shared library and several executables, for -- example), there are child processes other than compilation -- processes that are received. Until this problem is resolved, -- we will ignore such processes. loop Wait_Process (Pid, OK); if Pid = Invalid_Pid then return; end if; for J in Running_Compile'First .. Outstanding_Compiles loop if Pid = Running_Compile (J).Pid then Sfile := Running_Compile (J).Full_Source_File; Afile := Running_Compile (J).Lib_File; Uname := Running_Compile (J).Source_Unit; Syntax_Only := Running_Compile (J).Syntax_Only; Output_Is_Object := Running_Compile (J).Output_Is_Object; Project := Running_Compile (J).Project; -- If a mapping file was used by this compilation, -- get its file name for reuse by a subsequent compilation if Running_Compile (J).Mapping_File /= No_Mapping_File then Last_Free_Indices (Project) := Last_Free_Indices (Project) + 1; The_Free_Mapping_File_Indices (Project, Last_Free_Indices (Project)) := Running_Compile (J).Mapping_File; end if; -- To actually remove this Pid and related info from -- Running_Compile replace its entry with the last valid -- entry in Running_Compile. if J = Outstanding_Compiles then null; else Running_Compile (J) := Running_Compile (Outstanding_Compiles); end if; Outstanding_Compiles := Outstanding_Compiles - 1; return; end if; end loop; -- This child process was not one of our compilation processes; -- just ignore it for now. -- raise Program_Error; end loop; end Await_Compile; --------------------------- -- Bad_Compilation_Count -- --------------------------- function Bad_Compilation_Count return Natural is begin return Bad_Compilation.Last - Bad_Compilation.First + 1; end Bad_Compilation_Count; ---------------------------- -- Check_Standard_Library -- ---------------------------- procedure Check_Standard_Library is begin Need_To_Check_Standard_Library := False; if not Targparm.Suppress_Standard_Library_On_Target then declare Sfile : Name_Id; Add_It : Boolean := True; begin Name_Len := Standard_Library_Package_Body_Name'Length; Name_Buffer (1 .. Name_Len) := Standard_Library_Package_Body_Name; Sfile := Name_Enter; -- If we have a special runtime, we add the standard -- library only if we can find it. if RTS_Switch then Add_It := Find_File (Sfile, Osint.Source) /= No_File; end if; if Add_It then if Is_Marked (Sfile) then if Is_In_Obsoleted (Sfile) then Executable_Obsolete := True; end if; else Insert_Q (Sfile, Index => 0); Mark (Sfile, Index => 0); end if; end if; end; end if; end Check_Standard_Library; ----------------------------------- -- Collect_Arguments_And_Compile -- ----------------------------------- procedure Collect_Arguments_And_Compile (Source_File : File_Name_Type; Source_Index : Int) is begin -- Process_Created will be set True if an attempt is made to compile -- the source, that is if it is not in an externally built project. Process_Created := False; -- If arguments not yet collected (in Check), collect them now if not Arguments_Collected then Collect_Arguments (Source_File, Source_Index, Args); end if; -- If we use mapping file (-P or -C switches), then get one if Create_Mapping_File then Get_Mapping_File (Arguments_Project); end if; -- If the source is part of a project file, we set the ADA_*_PATHs, -- check for an eventual library project, and use the full path. if Arguments_Project /= No_Project then if not Projects.Table (Arguments_Project).Externally_Built then Prj.Env.Set_Ada_Paths (Arguments_Project, True); if not Unique_Compile and then MLib.Tgt.Support_For_Libraries /= MLib.Tgt.None then declare The_Data : Project_Data := Projects.Table (Arguments_Project); Prj : Project_Id := Arguments_Project; begin while The_Data.Extended_By /= No_Project loop Prj := The_Data.Extended_By; The_Data := Projects.Table (Prj); end loop; if The_Data.Library and then not The_Data.Need_To_Build_Lib then -- Add to the Q all sources of the project that -- have not been marked Insert_Project_Sources (The_Project => Prj, All_Projects => False, Into_Q => True); -- Now mark the project as processed Projects.Table (Prj).Need_To_Build_Lib := True; end if; end; end if; -- Change to the object directory of the project file, -- if necessary. Change_To_Object_Directory (Arguments_Project); Pid := Compile (Arguments_Path_Name, Lib_File, Source_Index, Arguments (1 .. Last_Argument)); Process_Created := True; end if; else -- If this is a source outside of any project file, make sure it -- will be compiled in object directory of the main project file. if Main_Project /= No_Project then Change_To_Object_Directory (Arguments_Project); end if; Pid := Compile (Full_Source_File, Lib_File, Source_Index, Arguments (1 .. Last_Argument)); Process_Created := True; end if; end Collect_Arguments_And_Compile; ------------- -- Compile -- ------------- function Compile (S : Name_Id; L : Name_Id; Source_Index : Int; Args : Argument_List) return Process_Id is Comp_Args : Argument_List (Args'First .. Args'Last + 9); Comp_Next : Integer := Args'First; Comp_Last : Integer; function Ada_File_Name (Name : Name_Id) return Boolean; -- Returns True if Name is the name of an ada source file -- (i.e. suffix is .ads or .adb) ------------------- -- Ada_File_Name -- ------------------- function Ada_File_Name (Name : Name_Id) return Boolean is begin Get_Name_String (Name); return Name_Len > 4 and then Name_Buffer (Name_Len - 3 .. Name_Len - 1) = ".ad" and then (Name_Buffer (Name_Len) = 'b' or else Name_Buffer (Name_Len) = 's'); end Ada_File_Name; -- Start of processing for Compile begin Enter_Into_Obsoleted (S); -- By default, Syntax_Only is False Syntax_Only := False; for J in Args'Range loop if Args (J).all = "-gnats" then -- If we compile with -gnats, the bind step and the link step -- are inhibited. Also, we set Syntax_Only to True, so that -- we don't fail when we don't find the ALI file, after -- compilation. Do_Bind_Step := False; Do_Link_Step := False; Syntax_Only := True; elsif Args (J).all = "-gnatc" then -- If we compile with -gnatc, the bind step and the link step -- are inhibited. We set Syntax_Only to False for the case when -- -gnats was previously specified. Do_Bind_Step := False; Do_Link_Step := False; Syntax_Only := False; end if; end loop; Comp_Args (Comp_Next) := Comp_Flag; Comp_Next := Comp_Next + 1; -- Optimize the simple case where the gcc command line looks like -- gcc -c -I. ... -I- file.adb --into-> gcc -c ... file.adb if Args (Args'First).all = "-I" & Normalized_CWD and then Args (Args'Last).all = "-I-" and then S = Strip_Directory (S) then Comp_Last := Comp_Next + Args'Length - 3; Comp_Args (Comp_Next .. Comp_Last) := Args (Args'First + 1 .. Args'Last - 1); else Comp_Last := Comp_Next + Args'Length - 1; Comp_Args (Comp_Next .. Comp_Last) := Args; end if; -- Set -gnatpg for predefined files (for this purpose the renamings -- such as Text_IO do not count as predefined). Note that we strip -- the directory name from the source file name becase the call to -- Fname.Is_Predefined_File_Name cannot deal with directory prefixes. declare Fname : constant File_Name_Type := Strip_Directory (S); begin if Is_Predefined_File_Name (Fname, False) then if Check_Readonly_Files then Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := GNAT_Flag; else Make_Failed ("not allowed to compile """ & Get_Name_String (Fname) & """; use -a switch, or compile file with " & """-gnatg"" switch"); end if; end if; end; -- Now check if the file name has one of the suffixes familiar to -- the gcc driver. If this is not the case then add the ada flag -- "-x ada". if not Ada_File_Name (S) and then not Targparm.AAMP_On_Target then Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := Ada_Flag_1; Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := Ada_Flag_2; end if; if Source_Index /= 0 then declare Num : constant String := Source_Index'Img; begin Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := new String'("-gnateI" & Num (Num'First + 1 .. Num'Last)); end; end if; if Source_Index /= 0 or else L /= Strip_Directory (L) or else Object_Directory_Path /= null then -- Build -o argument Get_Name_String (L); for J in reverse 1 .. Name_Len loop if Name_Buffer (J) = '.' then Name_Len := J + Object_Suffix'Length - 1; Name_Buffer (J .. Name_Len) := Object_Suffix; exit; end if; end loop; Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := Output_Flag; Comp_Last := Comp_Last + 1; -- If an object directory was specified, prepend the object file -- name with this object directory. if Object_Directory_Path /= null then Comp_Args (Comp_Last) := new String'(Object_Directory_Path.all & Name_Buffer (1 .. Name_Len)); else Comp_Args (Comp_Last) := new String'(Name_Buffer (1 .. Name_Len)); end if; end if; if Create_Mapping_File then Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := Mapping_File_Arg; end if; Get_Name_String (S); Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := new String'(Name_Buffer (1 .. Name_Len)); GNAT.OS_Lib.Normalize_Arguments (Comp_Args (Args'First .. Comp_Last)); Comp_Last := Comp_Last + 1; Comp_Args (Comp_Last) := new String'("-gnatez"); Display (Gcc.all, Comp_Args (Args'First .. Comp_Last)); if Gcc_Path = null then Make_Failed ("error, unable to locate ", Gcc.all); end if; return GNAT.OS_Lib.Non_Blocking_Spawn (Gcc_Path.all, Comp_Args (Args'First .. Comp_Last)); end Compile; ---------------------- -- Get_Mapping_File -- ---------------------- procedure Get_Mapping_File (Project : Project_Id) is begin -- If there is a mapping file ready to be reused, reuse it if Last_Free_Indices (Project) > 0 then Mfile := The_Free_Mapping_File_Indices (Project, Last_Free_Indices (Project)); Last_Free_Indices (Project) := Last_Free_Indices (Project) - 1; -- Otherwise, create and initialize a new one else Init_Mapping_File (Project => Project, File_Index => Mfile); end if; -- Put the name in the mapping file argument for the invocation -- of the compiler. Free (Mapping_File_Arg); Mapping_File_Arg := new String'("-gnatem=" & Get_Name_String (The_Mapping_File_Names (Project, Mfile))); end Get_Mapping_File; ----------------------- -- Get_Next_Good_ALI -- ----------------------- function Get_Next_Good_ALI return ALI_Id is ALI : ALI_Id; begin pragma Assert (Good_ALI_Present); ALI := Good_ALI.Table (Good_ALI.Last); Good_ALI.Decrement_Last; return ALI; end Get_Next_Good_ALI; ---------------------- -- Good_ALI_Present -- ---------------------- function Good_ALI_Present return Boolean is begin return Good_ALI.First <= Good_ALI.Last; end Good_ALI_Present; -------------------- -- Record_Failure -- -------------------- procedure Record_Failure (File : File_Name_Type; Unit : Unit_Name_Type; Found : Boolean := True) is begin Bad_Compilation.Increment_Last; Bad_Compilation.Table (Bad_Compilation.Last) := (File, Unit, Found); end Record_Failure; --------------------- -- Record_Good_ALI -- --------------------- procedure Record_Good_ALI (A : ALI_Id) is begin Good_ALI.Increment_Last; Good_ALI.Table (Good_ALI.Last) := A; end Record_Good_ALI; -- Start of processing for Compile_Sources begin pragma Assert (Args'First = 1); -- Package and Queue initializations Good_ALI.Init; Output.Set_Standard_Error; if First_Q_Initialization then Init_Q; end if; if Initialize_ALI_Data then Initialize_ALI; Initialize_ALI_Source; end if; -- The following two flags affect the behavior of ALI.Set_Source_Table. -- We set Check_Source_Files to True to ensure that source file -- time stamps are checked, and we set All_Sources to False to -- avoid checking the presence of the source files listed in the -- source dependency section of an ali file (which would be a mistake -- since the ali file may be obsolete). Check_Source_Files := True; All_Sources := False; -- Only insert in the Q if it is not already done, to avoid simultaneous -- compilations if -jnnn is used. if not Is_Marked (Main_Source, Main_Index) then Insert_Q (Main_Source, Index => Main_Index); Mark (Main_Source, Main_Index); end if; First_Compiled_File := No_File; Most_Recent_Obj_File := No_File; Most_Recent_Obj_Stamp := Empty_Time_Stamp; Main_Unit := False; -- Keep looping until there is no more work to do (the Q is empty) -- and all the outstanding compilations have terminated Make_Loop : while not Empty_Q or else Outstanding_Compiles > 0 loop -- If the user does not want to keep going in case of errors then -- wait for the remaining outstanding compiles and then exit. if Bad_Compilation_Count > 0 and then not Keep_Going then while Outstanding_Compiles > 0 loop Await_Compile (Full_Source_File, Lib_File, Source_Unit, Compilation_OK); if not Compilation_OK then Record_Failure (Full_Source_File, Source_Unit); end if; end loop; exit Make_Loop; end if; -- PHASE 1: Check if there is more work that we can do (ie the Q -- is non empty). If there is, do it only if we have not yet used -- up all the available processes. if not Empty_Q and then Outstanding_Compiles < Max_Process then declare Source_Index : Int; -- Index of the current unit in the current source file begin Extract_From_Q (Source_File, Source_Unit, Source_Index); Full_Source_File := Osint.Full_Source_Name (Source_File); Lib_File := Osint.Lib_File_Name (Source_File, Source_Index); Full_Lib_File := Osint.Full_Lib_File_Name (Lib_File); -- If this source has already been compiled, the executable is -- obsolete. if Is_In_Obsoleted (Source_File) then Executable_Obsolete := True; end if; -- If the library file is an Ada library skip it if Full_Lib_File /= No_File and then In_Ada_Lib_Dir (Full_Lib_File) then Verbose_Msg (Lib_File, "is in an Ada library", Prefix => " "); -- If the library file is a read-only library skip it, but -- only if, when using project files, this library file is -- in the right object directory (a read-only ALI file -- in the object directory of a project being extended -- should not be skipped). elsif Full_Lib_File /= No_File and then not Check_Readonly_Files and then Is_Readonly_Library (Full_Lib_File) and then Is_In_Object_Directory (Source_File, Full_Lib_File) then Verbose_Msg (Lib_File, "is a read-only library", Prefix => " "); -- The source file that we are checking cannot be located elsif Full_Source_File = No_File then Record_Failure (Source_File, Source_Unit, False); -- Source and library files can be located but are internal -- files elsif not Check_Readonly_Files and then Full_Lib_File /= No_File and then Is_Internal_File_Name (Source_File) then if Force_Compilations then Fail ("not allowed to compile """ & Get_Name_String (Source_File) & """; use -a switch, or compile file with " & """-gnatg"" switch"); end if; Verbose_Msg (Lib_File, "is an internal library", Prefix => " "); -- The source file that we are checking can be located else Arguments_Collected := False; -- Don't waste any time if we have to recompile anyway Obj_Stamp := Empty_Time_Stamp; Need_To_Compile := Force_Compilations; if not Force_Compilations then Read_Only := Full_Lib_File /= No_File and then not Check_Readonly_Files and then Is_Readonly_Library (Full_Lib_File); Check (Source_File, Source_Index, Args, Lib_File, Read_Only, ALI, Obj_File, Obj_Stamp); Need_To_Compile := (ALI = No_ALI_Id); end if; if not Need_To_Compile then -- The ALI file is up-to-date. Record its Id Record_Good_ALI (ALI); -- Record the time stamp of the most recent object file -- as long as no (re)compilations are needed. if First_Compiled_File = No_File and then (Most_Recent_Obj_File = No_File or else Obj_Stamp > Most_Recent_Obj_Stamp) then Most_Recent_Obj_File := Obj_File; Most_Recent_Obj_Stamp := Obj_Stamp; end if; else -- Is this the first file we have to compile? if First_Compiled_File = No_File then First_Compiled_File := Full_Source_File; Most_Recent_Obj_File := No_File; if Do_Not_Execute then exit Make_Loop; end if; end if; if In_Place_Mode then -- If the library file was not found, then save the -- library file near the source file. if Full_Lib_File = No_File then Lib_File := Osint.Lib_File_Name (Full_Source_File, Source_Index); -- If the library file was found, then save the -- library file in the same place. else Lib_File := Full_Lib_File; end if; end if; -- Start the compilation and record it. We can do this -- because there is at least one free process. Collect_Arguments_And_Compile (Source_File, Source_Index); -- Make sure we could successfully start the compilation if Process_Created then if Pid = Invalid_Pid then Record_Failure (Full_Source_File, Source_Unit); else Add_Process (Pid, Full_Source_File, Lib_File, Source_Unit, Mfile); end if; end if; end if; end if; end; end if; -- PHASE 2: Now check if we should wait for a compilation to -- finish. This is the case if all the available processes are -- busy compiling sources or there is nothing else to do -- (that is the Q is empty and there are no good ALIs to process). if Outstanding_Compiles = Max_Process or else (Empty_Q and then not Good_ALI_Present and then Outstanding_Compiles > 0) then Await_Compile (Full_Source_File, Lib_File, Source_Unit, Compilation_OK); if not Compilation_OK then Record_Failure (Full_Source_File, Source_Unit); end if; if Compilation_OK or else Keep_Going then -- Re-read the updated library file declare Saved_Object_Consistency : constant Boolean := Check_Object_Consistency; begin -- If compilation was not OK, or if output is not an -- object file and we don't do the bind step, don't check -- for object consistency. Check_Object_Consistency := Check_Object_Consistency and Compilation_OK and (Output_Is_Object or Do_Bind_Step); Text := Read_Library_Info (Lib_File); -- Restore Check_Object_Consistency to its initial value Check_Object_Consistency := Saved_Object_Consistency; end; -- If an ALI file was generated by this compilation, scan -- the ALI file and record it. -- If the scan fails, a previous ali file is inconsistent with -- the unit just compiled. if Text /= null then ALI := Scan_ALI (Lib_File, Text, Ignore_ED => False, Err => True); if ALI = No_ALI_Id then -- Record a failure only if not already done if Compilation_OK then Inform (Lib_File, "incompatible ALI file, please recompile"); Record_Failure (Full_Source_File, Source_Unit); end if; else Free (Text); Record_Good_ALI (ALI); end if; -- If we could not read the ALI file that was just generated -- then there could be a problem reading either the ALI or the -- corresponding object file (if Check_Object_Consistency -- is set Read_Library_Info checks that the time stamp of the -- object file is more recent than that of the ALI). For an -- example of problems caught by this test see [6625-009]. -- However, we record a failure only if not already done. else if Compilation_OK and not Syntax_Only then Inform (Lib_File, "WARNING: ALI or object file not found after compile"); Record_Failure (Full_Source_File, Source_Unit); end if; end if; end if; end if; -- PHASE 3: Check if we recorded good ALI files. If yes process -- them now in the order in which they have been recorded. There -- are two occasions in which we record good ali files. The first is -- in phase 1 when, after scanning an existing ALI file we realize -- it is up-to-date, the second instance is after a successful -- compilation. while Good_ALI_Present loop ALI := Get_Next_Good_ALI; declare Source_Index : Int := Unit_Index_Of (ALIs.Table (ALI).Afile); begin -- If we are processing the library file corresponding to the -- main source file check if this source can be a main unit. if ALIs.Table (ALI).Sfile = Main_Source and then Source_Index = Main_Index then Main_Unit := ALIs.Table (ALI).Main_Program /= None; end if; -- The following adds the standard library (s-stalib) to the -- list of files to be handled by gnatmake: this file and any -- files it depends on are always included in every bind, -- even if they are not in the explicit dependency list. -- Of course, it is not added if Suppress_Standard_Library -- is True. -- However, to avoid annoying output about s-stalib.ali being -- read only, when "-v" is used, we add the standard library -- only when "-a" is used. if Need_To_Check_Standard_Library then Check_Standard_Library; end if; -- Now insert in the Q the unmarked source files (i.e. those -- which have never been inserted in the Q and hence never -- considered). Only do that if Unique_Compile is False. if not Unique_Compile then for J in ALIs.Table (ALI).First_Unit .. ALIs.Table (ALI).Last_Unit loop for K in Units.Table (J).First_With .. Units.Table (J).Last_With loop Sfile := Withs.Table (K).Sfile; Add_Dependency (ALIs.Table (ALI).Sfile, Sfile); if Is_In_Obsoleted (Sfile) then Executable_Obsolete := True; end if; if Sfile = No_File then Debug_Msg ("Skipping generic:", Withs.Table (K).Uname); else Source_Index := Unit_Index_Of (Withs.Table (K).Afile); if Is_Marked (Sfile, Source_Index) then Debug_Msg ("Skipping marked file:", Sfile); elsif not Check_Readonly_Files and then Is_Internal_File_Name (Sfile) then Debug_Msg ("Skipping internal file:", Sfile); else Insert_Q (Sfile, Withs.Table (K).Uname, Source_Index); Mark (Sfile, Source_Index); end if; end if; end loop; end loop; end if; end; end loop; if Display_Compilation_Progress then Write_Str ("completed "); Write_Int (Int (Q_Front)); Write_Str (" out of "); Write_Int (Int (Q.Last)); Write_Str (" ("); Write_Int (Int ((Q_Front * 100) / (Q.Last - Q.First))); Write_Str ("%)..."); Write_Eol; end if; end loop Make_Loop; Compilation_Failures := Bad_Compilation_Count; -- Compilation is finished -- Delete any temporary configuration pragma file Delete_Temp_Config_Files; end Compile_Sources; ---------------------------------- -- Configuration_Pragmas_Switch -- ---------------------------------- function Configuration_Pragmas_Switch (For_Project : Project_Id) return Argument_List is The_Packages : Package_Id; Gnatmake : Package_Id; Compiler : Package_Id; Global_Attribute : Variable_Value := Nil_Variable_Value; Local_Attribute : Variable_Value := Nil_Variable_Value; Global_Attribute_Present : Boolean := False; Local_Attribute_Present : Boolean := False; Result : Argument_List (1 .. 3); Last : Natural := 0; function Absolute_Path (Path : Name_Id; Project : Project_Id) return String; -- Returns an absolute path for a configuration pragmas file ------------------- -- Absolute_Path -- ------------------- function Absolute_Path (Path : Name_Id; Project : Project_Id) return String is begin Get_Name_String (Path); declare Path_Name : constant String := Name_Buffer (1 .. Name_Len); begin if Is_Absolute_Path (Path_Name) then return Path_Name; else declare Parent_Directory : constant String := Get_Name_String (Projects.Table (Project).Directory); begin if Parent_Directory (Parent_Directory'Last) = Directory_Separator then return Parent_Directory & Path_Name; else return Parent_Directory & Directory_Separator & Path_Name; end if; end; end if; end; end Absolute_Path; -- Start of processing for Configuration_Pragmas_Switch begin Prj.Env.Create_Config_Pragmas_File (For_Project, Main_Project); if Projects.Table (For_Project).Config_File_Name /= No_Name then Temporary_Config_File := Projects.Table (For_Project).Config_File_Temp; Last := 1; Result (1) := new String' ("-gnatec=" & Get_Name_String (Projects.Table (For_Project).Config_File_Name)); else Temporary_Config_File := False; end if; -- Check for attribute Builder'Global_Configuration_Pragmas The_Packages := Projects.Table (Main_Project).Decl.Packages; Gnatmake := Prj.Util.Value_Of (Name => Name_Builder, In_Packages => The_Packages); if Gnatmake /= No_Package then Global_Attribute := Prj.Util.Value_Of (Variable_Name => Name_Global_Configuration_Pragmas, In_Variables => Packages.Table (Gnatmake).Decl.Attributes); Global_Attribute_Present := Global_Attribute /= Nil_Variable_Value and then Get_Name_String (Global_Attribute.Value) /= ""; if Global_Attribute_Present then declare Path : constant String := Absolute_Path (Global_Attribute.Value, Global_Attribute.Project); begin if not Is_Regular_File (Path) then Make_Failed ("cannot find configuration pragmas file ", Path); end if; Last := Last + 1; Result (Last) := new String'("-gnatec=" & Path); end; end if; end if; -- Check for attribute Compiler'Local_Configuration_Pragmas The_Packages := Projects.Table (For_Project).Decl.Packages; Compiler := Prj.Util.Value_Of (Name => Name_Compiler, In_Packages => The_Packages); if Compiler /= No_Package then Local_Attribute := Prj.Util.Value_Of (Variable_Name => Name_Local_Configuration_Pragmas, In_Variables => Packages.Table (Compiler).Decl.Attributes); Local_Attribute_Present := Local_Attribute /= Nil_Variable_Value and then Get_Name_String (Local_Attribute.Value) /= ""; if Local_Attribute_Present then declare Path : constant String := Absolute_Path (Local_Attribute.Value, Local_Attribute.Project); begin if not Is_Regular_File (Path) then Make_Failed ("cannot find configuration pragmas file ", Path); end if; Last := Last + 1; Result (Last) := new String'("-gnatec=" & Path); end; end if; end if; return Result (1 .. Last); end Configuration_Pragmas_Switch; --------------- -- Debug_Msg -- --------------- procedure Debug_Msg (S : String; N : Name_Id) is begin if Debug.Debug_Flag_W then Write_Str (" ... "); Write_Str (S); Write_Str (" "); Write_Name (N); Write_Eol; end if; end Debug_Msg; --------------------------- -- Delete_All_Temp_Files -- --------------------------- procedure Delete_All_Temp_Files is begin if Gnatmake_Called and not Debug.Debug_Flag_N then Delete_Mapping_Files; Delete_Temp_Config_Files; Prj.Env.Delete_All_Path_Files; end if; end Delete_All_Temp_Files; -------------------------- -- Delete_Mapping_Files -- -------------------------- procedure Delete_Mapping_Files is Success : Boolean; begin if not Debug.Debug_Flag_N then if The_Mapping_File_Names /= null then for Project in The_Mapping_File_Names'Range (1) loop for Index in 1 .. Last_Mapping_File_Names (Project) loop Delete_File (Name => Get_Name_String (The_Mapping_File_Names (Project, Index)), Success => Success); end loop; end loop; end if; end if; end Delete_Mapping_Files; ------------------------------ -- Delete_Temp_Config_Files -- ------------------------------ procedure Delete_Temp_Config_Files is Success : Boolean; begin if (not Debug.Debug_Flag_N) and Main_Project /= No_Project then for Project in 1 .. Projects.Last loop if Projects.Table (Project).Config_File_Temp then if Verbose_Mode then Write_Str ("Deleting temp configuration file """); Write_Str (Get_Name_String (Projects.Table (Project).Config_File_Name)); Write_Line (""""); end if; Delete_File (Name => Get_Name_String (Projects.Table (Project).Config_File_Name), Success => Success); -- Make sure that we don't have a config file for this -- project, in case when there are several mains. -- In this case, we will recreate another config file: -- we cannot reuse the one that we just deleted! Projects.Table (Project).Config_Checked := False; Projects.Table (Project).Config_File_Name := No_Name; Projects.Table (Project).Config_File_Temp := False; end if; end loop; end if; end Delete_Temp_Config_Files; ------------- -- Display -- ------------- procedure Display (Program : String; Args : Argument_List) is begin pragma Assert (Args'First = 1); if Display_Executed_Programs then Write_Str (Program); for J in Args'Range loop -- Never display -gnatez if Args (J).all /= "-gnatez" then -- Do not display the mapping file argument automatically -- created when using a project file. if Main_Project = No_Project or else Debug.Debug_Flag_N or else Args (J)'Length < 8 or else Args (J) (Args (J)'First .. Args (J)'First + 6) /= "-gnatem" then -- When -dn is not specified, do not display the config -- pragmas switch (-gnatec) for the temporary file created -- by the project manager (always the first -gnatec switch). -- Reset Temporary_Config_File to False so that the eventual -- other -gnatec switches will be displayed. if (not Debug.Debug_Flag_N) and then Temporary_Config_File and then Args (J)'Length > 7 and then Args (J) (Args (J)'First .. Args (J)'First + 6) = "-gnatec" then Temporary_Config_File := False; -- Do not display the -F=mapping_file switch for -- gnatbind, if -dn is not specified. elsif Debug.Debug_Flag_N or else Args (J)'Length < 4 or else Args (J) (Args (J)'First .. Args (J)'First + 2) /= "-F=" then Write_Str (" "); Write_Str (Args (J).all); end if; end if; end if; end loop; Write_Eol; end if; end Display; ---------------------- -- Display_Commands -- ---------------------- procedure Display_Commands (Display : Boolean := True) is begin Display_Executed_Programs := Display; end Display_Commands; ------------- -- Empty_Q -- ------------- function Empty_Q return Boolean is begin if Debug.Debug_Flag_P then Write_Str (" Q := ["); for J in Q_Front .. Q.Last - 1 loop Write_Str (" "); Write_Name (Q.Table (J).File); Write_Eol; Write_Str (" "); end loop; Write_Str ("]"); Write_Eol; end if; return Q_Front >= Q.Last; end Empty_Q; -------------------------- -- Enter_Into_Obsoleted -- -------------------------- procedure Enter_Into_Obsoleted (F : Name_Id) is Name : constant String := Get_Name_String (F); First : Natural := Name'Last; F2 : Name_Id := F; begin while First > Name'First and then Name (First - 1) /= Directory_Separator and then Name (First - 1) /= '/' loop First := First - 1; end loop; if First /= Name'First then Name_Len := 0; Add_Str_To_Name_Buffer (Name (First .. Name'Last)); F2 := Name_Find; end if; Debug_Msg ("New entry in Obsoleted table:", F2); Obsoleted.Set (F2, True); end Enter_Into_Obsoleted; --------------------- -- Extract_Failure -- --------------------- procedure Extract_Failure (File : out File_Name_Type; Unit : out Unit_Name_Type; Found : out Boolean) is begin File := Bad_Compilation.Table (Bad_Compilation.Last).File; Unit := Bad_Compilation.Table (Bad_Compilation.Last).Unit; Found := Bad_Compilation.Table (Bad_Compilation.Last).Found; Bad_Compilation.Decrement_Last; end Extract_Failure; -------------------- -- Extract_From_Q -- -------------------- procedure Extract_From_Q (Source_File : out File_Name_Type; Source_Unit : out Unit_Name_Type; Source_Index : out Int) is File : constant File_Name_Type := Q.Table (Q_Front).File; Unit : constant Unit_Name_Type := Q.Table (Q_Front).Unit; Index : constant Int := Q.Table (Q_Front).Index; begin if Debug.Debug_Flag_Q then Write_Str (" Q := Q - [ "); Write_Name (File); if Index /= 0 then Write_Str (", "); Write_Int (Index); end if; Write_Str (" ]"); Write_Eol; end if; Q_Front := Q_Front + 1; Source_File := File; Source_Unit := Unit; Source_Index := Index; end Extract_From_Q; -------------- -- Gnatmake -- -------------- procedure Gnatmake is Main_Source_File : File_Name_Type; -- The source file containing the main compilation unit Compilation_Failures : Natural; Total_Compilation_Failures : Natural := 0; Is_Main_Unit : Boolean; -- Set to True by Compile_Sources if the Main_Source_File can be a -- main unit. Main_ALI_File : File_Name_Type; -- The ali file corresponding to Main_Source_File Executable : File_Name_Type := No_File; -- The file name of an executable Non_Std_Executable : Boolean := False; -- Non_Std_Executable is set to True when there is a possibility -- that the linker will not choose the correct executable file name. Current_Work_Dir : constant String_Access := new String'(Get_Current_Dir); -- The current working directory, used to modify some relative path -- switches on the command line when a project file is used. Current_Main_Index : Int := 0; -- If not zero, the index of the current main unit in its source file There_Are_Stand_Alone_Libraries : Boolean := False; -- Set to True when there are Stand-Alone Libraries, so that gnatbind -- is invoked with the -F switch to force checking of elaboration flags. Mapping_Path : Name_Id := No_Name; -- The path name of the mapping file Discard : Boolean; procedure Check_Mains; -- Check that the main subprograms do exist and that they all -- belong to the same project file. procedure Create_Binder_Mapping_File (Args : in out Argument_List; Last_Arg : in out Natural); -- Create a binder mapping file and add the necessary switch ----------------- -- Check_Mains -- ----------------- procedure Check_Mains is Real_Main_Project : Project_Id := No_Project; -- The project of the first main Proj : Project_Id := No_Project; -- The project of the current main Data : Project_Data; Real_Path : String_Access; begin Mains.Reset; -- Check each main loop declare Main : constant String := Mains.Next_Main; -- The name specified on the command line may include -- directory information. File_Name : constant String := Base_Name (Main); -- The simple file name of the current main main begin exit when Main = ""; -- Get the project of the current main Proj := Prj.Env.Project_Of (File_Name, Main_Project); -- Fail if the current main is not a source of a -- project. if Proj = No_Project then Make_Failed ("""" & Main & """ is not a source of any project"); else -- If there is directory information, check that -- the source exists and, if it does, that the path -- is the actual path of a source of a project. if Main /= File_Name then Data := Projects.Table (Main_Project); Real_Path := Locate_Regular_File (Main & Get_Name_String (Data.Naming.Ada_Body_Suffix), ""); if Real_Path = null then Real_Path := Locate_Regular_File (Main & Get_Name_String (Data.Naming.Ada_Spec_Suffix), ""); end if; if Real_Path = null then Real_Path := Locate_Regular_File (Main, ""); end if; -- Fail if the file cannot be found if Real_Path = null then Make_Failed ("file """ & Main & """ does not exist"); end if; declare Project_Path : constant String := Prj.Env.File_Name_Of_Library_Unit_Body (Name => File_Name, Project => Main_Project, Main_Project_Only => False, Full_Path => True); Normed_Path : constant String := Normalize_Pathname (Real_Path.all, Case_Sensitive => False); Proj_Path : constant String := Normalize_Pathname (Project_Path, Case_Sensitive => False); begin Free (Real_Path); -- Fail if it is not the correct path if Normed_Path /= Proj_Path then if Verbose_Mode then Write_Str (Normed_Path); Write_Str (" /= "); Write_Line (Proj_Path); end if; Make_Failed ("""" & Main & """ is not a source of any project"); end if; end; end if; if not Unique_Compile then -- Record the project, if it is the first main if Real_Main_Project = No_Project then Real_Main_Project := Proj; elsif Proj /= Real_Main_Project then -- Fail, as the current main is not a source -- of the same project as the first main. Make_Failed ("""" & Main & """ is not a source of project " & Get_Name_String (Projects.Table (Real_Main_Project).Name)); end if; end if; end if; -- If -u and -U are not used, we may have mains that -- are sources of a project that is not the one -- specified with switch -P. if not Unique_Compile then Main_Project := Real_Main_Project; end if; end; end loop; end Check_Mains; -------------------------------- -- Create_Binder_Mapping_File -- -------------------------------- procedure Create_Binder_Mapping_File (Args : in out Argument_List; Last_Arg : in out Natural) is Mapping_FD : File_Descriptor := Invalid_FD; -- A File Descriptor for an eventual mapping file ALI_Unit : Name_Id := No_Name; -- The unit name of an ALI file ALI_Name : Name_Id := No_Name; -- The file name of the ALI file ALI_Project : Project_Id := No_Project; -- The project of the ALI file Bytes : Integer; OK : Boolean := True; Status : Boolean; -- For call to Close begin Tempdir.Create_Temp_File (Mapping_FD, Mapping_Path); if Mapping_FD /= Invalid_FD then -- Traverse all units for J in Prj.Com.Units.First .. Prj.Com.Units.Last loop declare Unit : constant Prj.Com.Unit_Data := Prj.Com.Units.Table (J); use Prj.Com; begin if Unit.Name /= No_Name then -- If there is a body, put it in the mapping if Unit.File_Names (Body_Part).Name /= No_Name and then Unit.File_Names (Body_Part).Project /= No_Project then Get_Name_String (Unit.Name); Name_Buffer (Name_Len + 1 .. Name_Len + 2) := "%b"; Name_Len := Name_Len + 2; ALI_Unit := Name_Find; ALI_Name := Lib_File_Name (Unit.File_Names (Body_Part).Name); ALI_Project := Unit.File_Names (Body_Part).Project; -- Otherwise, if there is a spec, put it -- in the mapping. elsif Unit.File_Names (Specification).Name /= No_Name and then Unit.File_Names (Specification).Project /= No_Project then Get_Name_String (Unit.Name); Name_Buffer (Name_Len + 1 .. Name_Len + 2) := "%s"; Name_Len := Name_Len + 2; ALI_Unit := Name_Find; ALI_Name := Lib_File_Name (Unit.File_Names (Specification).Name); ALI_Project := Unit.File_Names (Specification).Project; else ALI_Name := No_Name; end if; -- If we have something to put in the mapping -- then we do it now. However, if the project -- is extended, we don't put anything in the -- mapping file, because we do not know where -- the ALI file is: it might be in the ext- -- ended project obj dir as well as in the -- extending project obj dir. if ALI_Name /= No_Name and then Projects.Table (ALI_Project).Extended_By = No_Project and then Projects.Table (ALI_Project).Extends = No_Project then -- First line is the unit name Get_Name_String (ALI_Unit); Name_Len := Name_Len + 1; Name_Buffer (Name_Len) := ASCII.LF; Bytes := Write (Mapping_FD, Name_Buffer (1)'Address, Name_Len); OK := Bytes = Name_Len; exit when not OK; -- Second line it the ALI file name Get_Name_String (ALI_Name); Name_Len := Name_Len + 1; Name_Buffer (Name_Len) := ASCII.LF; Bytes := Write (Mapping_FD, Name_Buffer (1)'Address, Name_Len); OK := Bytes = Name_Len; exit when not OK; -- Third line it the ALI path name, -- concatenation of the project -- directory with the ALI file name. declare ALI : constant String := Get_Name_String (ALI_Name); begin Get_Name_String (Projects.Table (ALI_Project). Object_Directory); if Name_Buffer (Name_Len) /= Directory_Separator then Name_Len := Name_Len + 1; Name_Buffer (Name_Len) := Directory_Separator; end if; Name_Buffer (Name_Len + 1 .. Name_Len + ALI'Length) := ALI; Name_Len := Name_Len + ALI'Length + 1; Name_Buffer (Name_Len) := ASCII.LF; Bytes := Write (Mapping_FD, Name_Buffer (1)'Address, Name_Len); OK := Bytes = Name_Len; end; -- If OK is False, it means we were unable -- to write a line. No point in continuing -- with the other units. exit when not OK; end if; end if; end; end loop; Close (Mapping_FD, Status); OK := OK and Status; -- If the creation of the mapping file was successful, -- we add the switch to the arguments of gnatbind. if OK then Last_Arg := Last_Arg + 1; Args (Last_Arg) := new String'("-F=" & Get_Name_String (Mapping_Path)); end if; end if; end Create_Binder_Mapping_File; -- Start of processing for Gnatmake -- This body is very long, should be broken down ??? begin Gnatmake_Called := True; Install_Int_Handler (Sigint_Intercepted'Access); Do_Compile_Step := True; Do_Bind_Step := True; Do_Link_Step := True; Obsoleted.Reset; Make.Initialize; Bind_Shared := No_Shared_Switch'Access; Link_With_Shared_Libgcc := No_Shared_Libgcc_Switch'Access; Failed_Links.Set_Last (0); Successful_Links.Set_Last (0); if Hostparm.Java_VM then Gcc := new String'("jgnat"); Gnatbind := new String'("jgnatbind"); Gnatlink := new String'("jgnatlink"); -- Do not check for an object file (".o") when compiling to -- Java bytecode since ".class" files are generated instead. Check_Object_Consistency := False; end if; -- Special case when switch -B was specified if Build_Bind_And_Link_Full_Project then -- When switch -B is specified, there must be a project file if Main_Project = No_Project then Make_Failed ("-B cannot be used without a project file"); -- No main program may be specified on the command line elsif Osint.Number_Of_Files /= 0 then Make_Failed ("-B cannot be used with a main specified on " & "the command line"); -- And the project file cannot be a library project file elsif Projects.Table (Main_Project).Library then Make_Failed ("-B cannot be used for a library project file"); else Insert_Project_Sources (The_Project => Main_Project, All_Projects => Unique_Compile_All_Projects, Into_Q => False); -- If there are no sources to compile, we fail if Osint.Number_Of_Files = 0 then Make_Failed ("no sources to compile"); end if; -- Specify -n for gnatbind and add the ALI files of all the -- sources, except the one which is a fake main subprogram: -- this is the one for the binder generated file and it will be -- transmitted to gnatlink. These sources are those that are -- in the queue. Add_Switch ("-n", Binder, And_Save => True); for J in Q.First .. Q.Last - 1 loop Add_Switch (Get_Name_String (Lib_File_Name (Q.Table (J).File)), Binder, And_Save => True); end loop; end if; elsif Main_Index /= 0 and then Osint.Number_Of_Files > 1 then Make_Failed ("cannot specify several mains with a multi-unit index"); elsif Main_Project /= No_Project then -- If the main project file is a library project file, main(s) -- cannot be specified on the command line. if Osint.Number_Of_Files /= 0 then if Projects.Table (Main_Project).Library and then not Unique_Compile and then ((not Make_Steps) or else Bind_Only or else Link_Only) then Make_Failed ("cannot specify a main program " & "on the command line for a library project file"); else -- Check that each main on the command line is a source of a -- project file and, if there are several mains, each of them -- is a source of the same project file. Check_Mains; end if; -- If no mains have been specified on the command line, -- and we are using a project file, we either find the main(s) -- in the attribute Main of the main project, or we put all -- the sources of the project file as mains. else if Main_Index /= 0 then Make_Failed ("cannot specify a multi-unit index but no main " & "on the command line"); end if; declare Value : String_List_Id := Projects.Table (Main_Project).Mains; begin -- The attribute Main is an empty list or not specified, -- or else gnatmake was invoked with the switch "-u". if Value = Prj.Nil_String or else Unique_Compile then if (not Make_Steps) or else Compile_Only or else not Projects.Table (Main_Project).Library then -- First make sure that the binder and the linker -- will not be invoked. Do_Bind_Step := False; Do_Link_Step := False; -- Put all the sources in the queue Insert_Project_Sources (The_Project => Main_Project, All_Projects => Unique_Compile_All_Projects, Into_Q => False); -- If there are no sources to compile, we fail if Osint.Number_Of_Files = 0 then Make_Failed ("no sources to compile"); end if; end if; else -- The attribute Main is not an empty list. -- Put all the main subprograms in the list as if there -- were specified on the command line. However, if attribute -- Languages includes a language other than Ada, only -- include the Ada mains; if there is no Ada main, compile -- all the sources of the project. declare Data : constant Project_Data := Projects.Table (Main_Project); Languages : constant Variable_Value := Prj.Util.Value_Of (Name_Languages, Data.Decl.Attributes); Current : String_List_Id; Element : String_Element; Foreign_Language : Boolean := False; At_Least_One_Main : Boolean := False; begin -- First, determine if there is a foreign language in -- attribute Languages. if not Languages.Default then Current := Languages.Values; Look_For_Foreign : while Current /= Nil_String loop Element := String_Elements.Table (Current); Get_Name_String (Element.Value); To_Lower (Name_Buffer (1 .. Name_Len)); if Name_Buffer (1 .. Name_Len) /= "ada" then Foreign_Language := True; exit Look_For_Foreign; end if; Current := Element.Next; end loop Look_For_Foreign; end if; -- Then, find all mains, or if there is a foreign -- language, all the Ada mains. while Value /= Prj.Nil_String loop Get_Name_String (String_Elements.Table (Value).Value); -- To know if a main is an Ada main, get its project. -- It should be the project specified on the command -- line. if (not Foreign_Language) or else Prj.Env.Project_Of (Name_Buffer (1 .. Name_Len), Main_Project) = Main_Project then At_Least_One_Main := True; Osint.Add_File (Get_Name_String (String_Elements.Table (Value).Value), Index => String_Elements.Table (Value).Index); end if; Value := String_Elements.Table (Value).Next; end loop; -- If we did not get any main, it means that all mains -- in attribute Mains are in a foreign language and -B -- was not specified to gnatmake; so, we fail. if not At_Least_One_Main then Make_Failed ("no Ada mains; use -B to build foreign main"); end if; end; end if; end; end if; end if; if Verbose_Mode then Write_Eol; Write_Str ("GNATMAKE "); Write_Str (Gnatvsn.Gnat_Version_String); Write_Eol; Write_Str ("Copyright 1995-2004 Free Software Foundation, Inc."); Write_Eol; end if; if Main_Project /= No_Project and then Projects.Table (Main_Project).Externally_Built then Make_Failed ("nothing to do for a main project that is externally built"); end if; if Osint.Number_Of_Files = 0 then if Main_Project /= No_Project and then Projects.Table (Main_Project).Library then if Do_Bind_Step and then not Projects.Table (Main_Project).Standalone_Library then Make_Failed ("only stand-alone libraries may be bound"); end if; -- Add the default search directories to be able to find libgnat Osint.Add_Default_Search_Dirs; -- And bind and or link the library MLib.Prj.Build_Library (For_Project => Main_Project, Gnatbind => Gnatbind.all, Gnatbind_Path => Gnatbind_Path, Gcc => Gcc.all, Gcc_Path => Gcc_Path, Bind => Bind_Only, Link => Link_Only); Exit_Program (E_Success); else -- Output usage information if no files to compile Usage; Exit_Program (E_Fatal); end if; end if; -- If -M was specified, behave as if -n was specified if List_Dependencies then Do_Not_Execute := True; end if; -- Note that Osint.Next_Main_Source will always return the (possibly -- abbreviated file) without any directory information. Main_Source_File := Next_Main_Source; if Current_File_Index /= No_Index then Main_Index := Current_File_Index; end if; Add_Switch ("-I-", Binder, And_Save => True); Add_Switch ("-I-", Compiler, And_Save => True); if Main_Project = No_Project then if Look_In_Primary_Dir then Add_Switch ("-I" & Normalize_Directory_Name (Get_Primary_Src_Search_Directory.all).all, Compiler, Append_Switch => False, And_Save => False); Add_Switch ("-aO" & Normalized_CWD, Binder, Append_Switch => False, And_Save => False); end if; else -- If we use a project file, we have already checked that a main -- specified on the command line with directory information has the -- path name corresponding to a correct source in the project tree. -- So, we don't need the directory information to be taken into -- account by Find_File, and in fact it may lead to take the wrong -- sources for other compilation units, when there are extending -- projects. Look_In_Primary_Dir := False; end if; -- If the user wants a program without a main subprogram, add the -- appropriate switch to the binder. if No_Main_Subprogram then Add_Switch ("-z", Binder, And_Save => True); end if; if Main_Project /= No_Project then if Projects.Table (Main_Project).Object_Directory /= No_Name then -- Change the current directory to the object directory of -- the main project. begin Project_Object_Directory := No_Project; Change_To_Object_Directory (Main_Project); exception when Directory_Error => -- This should never happen. But, if it does, display the -- content of the parent directory of the obj dir. declare Parent : constant Dir_Name_Str := Dir_Name (Get_Name_String (Projects.Table (Main_Project).Object_Directory)); Dir : Dir_Type; Str : String (1 .. 200); Last : Natural; begin Write_Str ("Contents of directory """); Write_Str (Parent); Write_Line (""":"); Open (Dir, Parent); loop Read (Dir, Str, Last); exit when Last = 0; Write_Str (" "); Write_Line (Str (1 .. Last)); end loop; Close (Dir); exception when X : others => Write_Line ("(unexpected exception)"); Write_Line (Exception_Information (X)); if Is_Open (Dir) then Close (Dir); end if; end; Make_Failed ("unable to change working directory to """, Get_Name_String (Projects.Table (Main_Project).Object_Directory), """"); end; end if; -- Source file lookups should be cached for efficiency. -- Source files are not supposed to change. Osint.Source_File_Data (Cache => True); -- Find the file name of the (first) main unit declare Main_Source_File_Name : constant String := Get_Name_String (Main_Source_File); Main_Unit_File_Name : constant String := Prj.Env.File_Name_Of_Library_Unit_Body (Name => Main_Source_File_Name, Project => Main_Project, Main_Project_Only => not Unique_Compile); The_Packages : constant Package_Id := Projects.Table (Main_Project).Decl.Packages; Builder_Package : constant Prj.Package_Id := Prj.Util.Value_Of (Name => Name_Builder, In_Packages => The_Packages); Binder_Package : constant Prj.Package_Id := Prj.Util.Value_Of (Name => Name_Binder, In_Packages => The_Packages); Linker_Package : constant Prj.Package_Id := Prj.Util.Value_Of (Name => Name_Linker, In_Packages => The_Packages); begin -- We fail if we cannot find the main source file if Main_Unit_File_Name = "" then Make_Failed ('"' & Main_Source_File_Name, """ is not a unit of project ", Project_File_Name.all & "."); else -- Remove any directory information from the main -- source file name. declare Pos : Natural := Main_Unit_File_Name'Last; begin loop exit when Pos < Main_Unit_File_Name'First or else Main_Unit_File_Name (Pos) = Directory_Separator; Pos := Pos - 1; end loop; Name_Len := Main_Unit_File_Name'Last - Pos; Name_Buffer (1 .. Name_Len) := Main_Unit_File_Name (Pos + 1 .. Main_Unit_File_Name'Last); Main_Source_File := Name_Find; -- We only output the main source file if there is only one if Verbose_Mode and then Osint.Number_Of_Files = 1 then Write_Str ("Main source file: """); Write_Str (Main_Unit_File_Name (Pos + 1 .. Main_Unit_File_Name'Last)); Write_Line ("""."); end if; end; end if; -- If there is a package Builder in the main project file, add -- the switches from it. if Builder_Package /= No_Package then -- If there is only one main, we attempt to get the gnatmake -- switches for this main (if any). If there are no specific -- switch for this particular main, get the general gnatmake -- switches (if any). if Osint.Number_Of_Files = 1 then if Verbose_Mode then Write_Str ("Adding gnatmake switches for """); Write_Str (Main_Unit_File_Name); Write_Line ("""."); end if; Add_Switches (File_Name => Main_Unit_File_Name, Index => Main_Index, The_Package => Builder_Package, Program => None); else -- If there are several mains, we always get the general -- gnatmake switches (if any). -- Warn the user, if necessary, so that he is not surprized -- that specific switches are not taken into account. declare Defaults : constant Variable_Value := Prj.Util.Value_Of (Name => Name_Ada, Index => 0, Attribute_Or_Array_Name => Name_Default_Switches, In_Package => Builder_Package); Switches : constant Array_Element_Id := Prj.Util.Value_Of (Name => Name_Switches, In_Arrays => Packages.Table (Builder_Package).Decl.Arrays); begin if Defaults /= Nil_Variable_Value then if (not Quiet_Output) and then Switches /= No_Array_Element then Write_Line ("Warning: using Builder'Default_Switches" & "(""Ada""), as there are several mains"); end if; -- As there is never a source with name " ", we are -- guaranteed to always get the general switches. Add_Switches (File_Name => " ", Index => 0, The_Package => Builder_Package, Program => None); elsif (not Quiet_Output) and then Switches /= No_Array_Element then Write_Line ("Warning: using no switches from package Builder," & " as there are several mains"); end if; end; end if; end if; Osint.Add_Default_Search_Dirs; -- Record the current last switch index for table Binder_Switches -- and Linker_Switches, so that these tables may be reset before -- for each main, before adding swiches from the project file -- and from the command line. Last_Binder_Switch := Binder_Switches.Last; Last_Linker_Switch := Linker_Switches.Last; Check_Steps; -- Add binder switches from the project file for the first main if Do_Bind_Step and Binder_Package /= No_Package then if Verbose_Mode then Write_Str ("Adding binder switches for """); Write_Str (Main_Unit_File_Name); Write_Line ("""."); end if; Add_Switches (File_Name => Main_Unit_File_Name, Index => Main_Index, The_Package => Binder_Package, Program => Binder); end if; -- Add linker switches from the project file for the first main if Do_Link_Step and Linker_Package /= No_Package then if Verbose_Mode then Write_Str ("Adding linker switches for"""); Write_Str (Main_Unit_File_Name); Write_Line ("""."); end if; Add_Switches (File_Name => Main_Unit_File_Name, Index => Main_Index, The_Package => Linker_Package, Program => Linker); end if; end; end if; -- Get the target parameters, which are only needed for a couple of -- cases in gnatmake. Protect against an exception, such as the case -- of system.ads missing from the library, and fail gracefully. begin Targparm.Get_Target_Parameters; exception when Unrecoverable_Error => Make_Failed ("*** make failed."); end; Display_Commands (not Quiet_Output); Check_Steps; if Main_Project /= No_Project then -- For all library project, if the library file does not exist -- put all the project sources in the queue, and flag the project -- so that the library is generated. if not Unique_Compile and then MLib.Tgt.Support_For_Libraries /= MLib.Tgt.None then for Proj in Projects.First .. Projects.Last loop if Projects.Table (Proj).Library then Projects.Table (Proj).Need_To_Build_Lib := (not MLib.Tgt.Library_Exists_For (Proj)) and then (not Projects.Table (Proj).Externally_Built); if Projects.Table (Proj).Need_To_Build_Lib then -- If there is no object directory, then it will be -- impossible to build the library. So fail immediately. if Projects.Table (Proj).Object_Directory = No_Name then Make_Failed ("no object files to build library for project """, Get_Name_String (Projects.Table (Proj).Name), """"); Projects.Table (Proj).Need_To_Build_Lib := False; else if Verbose_Mode then Write_Str ("Library file does not exist for project """); Write_Str (Get_Name_String (Projects.Table (Proj).Name)); Write_Line (""""); end if; Insert_Project_Sources (The_Project => Proj, All_Projects => False, Into_Q => True); end if; end if; end if; end loop; end if; -- If a relative path output file has been specified, we add -- the exec directory. for J in reverse 1 .. Saved_Linker_Switches.Last - 1 loop if Saved_Linker_Switches.Table (J).all = Output_Flag.all then declare Exec_File_Name : constant String := Saved_Linker_Switches.Table (J + 1).all; begin if not Is_Absolute_Path (Exec_File_Name) then for Index in Exec_File_Name'Range loop if Exec_File_Name (Index) = Directory_Separator then Make_Failed ("relative executable (""", Exec_File_Name, """) with directory part not " & "allowed when using project files"); end if; end loop; Get_Name_String (Projects.Table (Main_Project).Exec_Directory); if Name_Buffer (Name_Len) /= Directory_Separator then Name_Len := Name_Len + 1; Name_Buffer (Name_Len) := Directory_Separator; end if; Name_Buffer (Name_Len + 1 .. Name_Len + Exec_File_Name'Length) := Exec_File_Name; Name_Len := Name_Len + Exec_File_Name'Length; Saved_Linker_Switches.Table (J + 1) := new String'(Name_Buffer (1 .. Name_Len)); end if; end; exit; end if; end loop; -- If we are using a project file, for relative paths we add the -- current working directory for any relative path on the command -- line and the project directory, for any relative path in the -- project file. declare Dir_Path : constant String_Access := new String'(Get_Name_String (Projects.Table (Main_Project).Directory)); begin for J in 1 .. Binder_Switches.Last loop Test_If_Relative_Path (Binder_Switches.Table (J), Parent => Dir_Path, Including_L_Switch => False); end loop; for J in 1 .. Saved_Binder_Switches.Last loop Test_If_Relative_Path (Saved_Binder_Switches.Table (J), Parent => Current_Work_Dir, Including_L_Switch => False); end loop; for J in 1 .. Linker_Switches.Last loop Test_If_Relative_Path (Linker_Switches.Table (J), Parent => Dir_Path); end loop; for J in 1 .. Saved_Linker_Switches.Last loop Test_If_Relative_Path (Saved_Linker_Switches.Table (J), Parent => Current_Work_Dir); end loop; for J in 1 .. Gcc_Switches.Last loop Test_If_Relative_Path (Gcc_Switches.Table (J), Parent => Dir_Path); end loop; for J in 1 .. Saved_Gcc_Switches.Last loop Test_If_Relative_Path (Saved_Gcc_Switches.Table (J), Parent => Current_Work_Dir); end loop; end; end if; -- We now put in the Binder_Switches and Linker_Switches tables, -- the binder and linker switches of the command line that have been -- put in the Saved_ tables. If a project file was used, then the -- command line switches will follow the project file switches. for J in 1 .. Saved_Binder_Switches.Last loop Add_Switch (Saved_Binder_Switches.Table (J), Binder, And_Save => False); end loop; for J in 1 .. Saved_Linker_Switches.Last loop Add_Switch (Saved_Linker_Switches.Table (J), Linker, And_Save => False); end loop; -- If no project file is used, we just put the gcc switches -- from the command line in the Gcc_Switches table. if Main_Project = No_Project then for J in 1 .. Saved_Gcc_Switches.Last loop Add_Switch (Saved_Gcc_Switches.Table (J), Compiler, And_Save => False); end loop; else -- And we put the command line gcc switches in the variable -- The_Saved_Gcc_Switches. They are going to be used later -- in procedure Compile_Sources. The_Saved_Gcc_Switches := new Argument_List (1 .. Saved_Gcc_Switches.Last + 1); for J in 1 .. Saved_Gcc_Switches.Last loop The_Saved_Gcc_Switches (J) := Saved_Gcc_Switches.Table (J); end loop; -- We never use gnat.adc when a project file is used The_Saved_Gcc_Switches (The_Saved_Gcc_Switches'Last) := No_gnat_adc; end if; -- If there was a --GCC, --GNATBIND or --GNATLINK switch on -- the command line, then we have to use it, even if there was -- another switch in the project file. if Saved_Gcc /= null then Gcc := Saved_Gcc; end if; if Saved_Gnatbind /= null then Gnatbind := Saved_Gnatbind; end if; if Saved_Gnatlink /= null then Gnatlink := Saved_Gnatlink; end if; Gcc_Path := GNAT.OS_Lib.Locate_Exec_On_Path (Gcc.all); Gnatbind_Path := GNAT.OS_Lib.Locate_Exec_On_Path (Gnatbind.all); Gnatlink_Path := GNAT.OS_Lib.Locate_Exec_On_Path (Gnatlink.all); -- If we have specified -j switch both from the project file -- and on the command line, the one from the command line takes -- precedence. if Saved_Maximum_Processes = 0 then Saved_Maximum_Processes := Maximum_Processes; end if; -- Allocate as many temporary mapping file names as the maximum -- number of compilation processed, for each possible project. The_Mapping_File_Names := new Temp_File_Names (No_Project .. Projects.Last, 1 .. Saved_Maximum_Processes); Last_Mapping_File_Names := new Indices'(No_Project .. Projects.Last => 0); The_Free_Mapping_File_Indices := new Free_File_Indices (No_Project .. Projects.Last, 1 .. Saved_Maximum_Processes); Last_Free_Indices := new Indices'(No_Project .. Projects.Last => 0); Bad_Compilation.Init; Current_Main_Index := Main_Index; -- Here is where the make process is started -- We do the same process for each main Multiple_Main_Loop : for N_File in 1 .. Osint.Number_Of_Files loop -- First, find the executable name and path Executable := No_File; Executable_Obsolete := False; Non_Std_Executable := False; -- Look inside the linker switches to see if the name -- of the final executable program was specified. for J in reverse Linker_Switches.First .. Linker_Switches.Last loop if Linker_Switches.Table (J).all = Output_Flag.all then pragma Assert (J < Linker_Switches.Last); -- We cannot specify a single executable for several -- main subprograms! if Osint.Number_Of_Files > 1 then Fail ("cannot specify a single executable " & "for several mains"); end if; Name_Len := Linker_Switches.Table (J + 1)'Length; Name_Buffer (1 .. Name_Len) := Linker_Switches.Table (J + 1).all; Executable := Name_Enter; Verbose_Msg (Executable, "final executable"); end if; end loop; -- If the name of the final executable program was not -- specified then construct it from the main input file. if Executable = No_File then if Main_Project = No_Project then Executable := Executable_Name (Strip_Suffix (Main_Source_File)); else -- If we are using a project file, we attempt to -- remove the body (or spec) termination of the main -- subprogram. We find it the the naming scheme of the -- project file. This will avoid to generate an -- executable "main.2" for a main subprogram -- "main.2.ada", when the body termination is ".2.ada". Executable := Prj.Util.Executable_Of (Main_Project, Main_Source_File, Main_Index); end if; end if; if Main_Project /= No_Project then declare Exec_File_Name : constant String := Get_Name_String (Executable); begin if not Is_Absolute_Path (Exec_File_Name) then for Index in Exec_File_Name'Range loop if Exec_File_Name (Index) = Directory_Separator then Make_Failed ("relative executable (""", Exec_File_Name, """) with directory part not " & "allowed when using project files"); end if; end loop; Get_Name_String (Projects.Table (Main_Project).Exec_Directory); if Name_Buffer (Name_Len) /= Directory_Separator then Name_Len := Name_Len + 1; Name_Buffer (Name_Len) := Directory_Separator; end if; Name_Buffer (Name_Len + 1 .. Name_Len + Exec_File_Name'Length) := Exec_File_Name; Name_Len := Name_Len + Exec_File_Name'Length; Executable := Name_Find; Non_Std_Executable := True; end if; end; end if; if Do_Compile_Step then Recursive_Compilation_Step : declare Args : Argument_List (1 .. Gcc_Switches.Last); First_Compiled_File : Name_Id; Youngest_Obj_File : Name_Id; Youngest_Obj_Stamp : Time_Stamp_Type; Executable_Stamp : Time_Stamp_Type; -- Executable is the final executable program Library_Rebuilt : Boolean := False; begin for J in 1 .. Gcc_Switches.Last loop Args (J) := Gcc_Switches.Table (J); end loop; -- Now we invoke Compile_Sources for the current main Compile_Sources (Main_Source => Main_Source_File, Args => Args, First_Compiled_File => First_Compiled_File, Most_Recent_Obj_File => Youngest_Obj_File, Most_Recent_Obj_Stamp => Youngest_Obj_Stamp, Main_Unit => Is_Main_Unit, Main_Index => Current_Main_Index, Compilation_Failures => Compilation_Failures, Check_Readonly_Files => Check_Readonly_Files, Do_Not_Execute => Do_Not_Execute, Force_Compilations => Force_Compilations, In_Place_Mode => In_Place_Mode, Keep_Going => Keep_Going, Initialize_ALI_Data => True, Max_Process => Saved_Maximum_Processes); if Verbose_Mode then Write_Str ("End of compilation"); Write_Eol; end if; -- Make sure the queue will be reinitialized for the next round First_Q_Initialization := True; Total_Compilation_Failures := Total_Compilation_Failures + Compilation_Failures; if Total_Compilation_Failures /= 0 then if Keep_Going then goto Next_Main; else List_Bad_Compilations; raise Compilation_Failed; end if; end if; -- Regenerate libraries, if any, and if object files -- have been regenerated. if Main_Project /= No_Project and then MLib.Tgt.Support_For_Libraries /= MLib.Tgt.None and then (Do_Bind_Step or Unique_Compile_All_Projects or not Compile_Only) and then (Do_Link_Step or N_File = Osint.Number_Of_Files) then Library_Projs.Init; declare Proj2 : Project_Id; Depth : Natural; Current : Natural; begin -- Put in Library_Projs table all library project -- file ids when the library need to be rebuilt. for Proj1 in Projects.First .. Projects.Last loop if Projects.Table (Proj1).Standalone_Library then There_Are_Stand_Alone_Libraries := True; end if; if Projects.Table (Proj1).Library and then not Projects.Table (Proj1).Need_To_Build_Lib and then not Projects.Table (Proj1).Externally_Built then MLib.Prj.Check_Library (Proj1); end if; if Projects.Table (Proj1).Need_To_Build_Lib then Library_Projs.Increment_Last; Current := Library_Projs.Last; Depth := Projects.Table (Proj1).Depth; -- Put the projects in decreasing depth order, -- so that if libA depends on libB, libB is first -- in order. while Current > 1 loop Proj2 := Library_Projs.Table (Current - 1); exit when Projects.Table (Proj2).Depth >= Depth; Library_Projs.Table (Current) := Proj2; Current := Current - 1; end loop; Library_Projs.Table (Current) := Proj1; Projects.Table (Proj1).Need_To_Build_Lib := False; end if; end loop; end; -- Build the libraries, if any need to be built for J in 1 .. Library_Projs.Last loop Library_Rebuilt := True; MLib.Prj.Build_Library (For_Project => Library_Projs.Table (J), Gnatbind => Gnatbind.all, Gnatbind_Path => Gnatbind_Path, Gcc => Gcc.all, Gcc_Path => Gcc_Path); end loop; end if; if List_Dependencies then if First_Compiled_File /= No_File then Inform (First_Compiled_File, "must be recompiled. Can't generate dependence list."); else List_Depend; end if; elsif First_Compiled_File = No_File and then not Do_Bind_Step and then not Quiet_Output and then not Library_Rebuilt and then Osint.Number_Of_Files = 1 then Inform (Msg => "objects up to date."); elsif Do_Not_Execute and then First_Compiled_File /= No_File then Write_Name (First_Compiled_File); Write_Eol; end if; -- Stop after compile step if any of: -- 1) -n (Do_Not_Execute) specified -- 2) -M (List_Dependencies) specified (also sets -- Do_Not_Execute above, so this is probably superfluous). -- 3) -c (Compile_Only) specified, but not -b (Bind_Only) -- 4) Made unit cannot be a main unit if (Do_Not_Execute or List_Dependencies or not Do_Bind_Step or not Is_Main_Unit) and then not No_Main_Subprogram and then not Build_Bind_And_Link_Full_Project then if Osint.Number_Of_Files = 1 then exit Multiple_Main_Loop; else goto Next_Main; end if; end if; -- If the objects were up-to-date check if the executable file -- is also up-to-date. For now always bind and link on the JVM -- since there is currently no simple way to check the -- up-to-date status of objects if not Hostparm.Java_VM and then First_Compiled_File = No_File then Executable_Stamp := File_Stamp (Executable); if not Executable_Obsolete then Executable_Obsolete := Youngest_Obj_Stamp > Executable_Stamp; end if; if not Executable_Obsolete then for Index in reverse 1 .. Dependencies.Last loop if Is_In_Obsoleted (Dependencies.Table (Index).Depends_On) then Enter_Into_Obsoleted (Dependencies.Table (Index).This); end if; end loop; Executable_Obsolete := Is_In_Obsoleted (Main_Source_File); Dependencies.Init; end if; if not Executable_Obsolete then -- If no Ada object files obsolete the executable, check -- for younger or missing linker files. Check_Linker_Options (Executable_Stamp, Youngest_Obj_File, Youngest_Obj_Stamp); Executable_Obsolete := Youngest_Obj_File /= No_File; end if; -- Return if the executable is up to date -- and otherwise motivate the relink/rebind. if not Executable_Obsolete then if not Quiet_Output then Inform (Executable, "up to date."); end if; if Osint.Number_Of_Files = 1 then exit Multiple_Main_Loop; else goto Next_Main; end if; end if; if Executable_Stamp (1) = ' ' then Verbose_Msg (Executable, "missing.", Prefix => " "); elsif Youngest_Obj_Stamp (1) = ' ' then Verbose_Msg (Youngest_Obj_File, "missing.", Prefix => " "); elsif Youngest_Obj_Stamp > Executable_Stamp then Verbose_Msg (Youngest_Obj_File, "(" & String (Youngest_Obj_Stamp) & ") newer than", Executable, "(" & String (Executable_Stamp) & ")"); else Verbose_Msg (Executable, "needs to be rebuild.", Prefix => " "); end if; end if; end Recursive_Compilation_Step; end if; -- For binding and linking, we need to be in the object directory of -- the main project. if Main_Project /= No_Project then Change_To_Object_Directory (Main_Project); end if; -- If we are here, it means that we need to rebuilt the current -- main. So we set Executable_Obsolete to True to make sure that -- the subsequent mains will be rebuilt. Main_ALI_In_Place_Mode_Step : declare ALI_File : File_Name_Type; Src_File : File_Name_Type; begin Src_File := Strip_Directory (Main_Source_File); ALI_File := Lib_File_Name (Src_File, Current_Main_Index); Main_ALI_File := Full_Lib_File_Name (ALI_File); -- When In_Place_Mode, the library file can be located in the -- Main_Source_File directory which may not be present in the -- library path. In this case, use the corresponding library file -- name. if Main_ALI_File = No_File and then In_Place_Mode then Get_Name_String (Get_Directory (Full_Source_Name (Src_File))); Get_Name_String_And_Append (ALI_File); Main_ALI_File := Name_Find; Main_ALI_File := Full_Lib_File_Name (Main_ALI_File); end if; if Main_ALI_File = No_File then Make_Failed ("could not find the main ALI file"); end if; end Main_ALI_In_Place_Mode_Step; if Do_Bind_Step then Bind_Step : declare Args : Argument_List (Binder_Switches.First .. Binder_Switches.Last + 2); -- The arguments for the invocation of gnatbind Last_Arg : Natural := Binder_Switches.Last; -- Index of the last argument in Args Shared_Libs : Boolean := False; -- Set to True when there are shared library project files or -- when gnatbind is invoked with -shared. begin -- Check if there are shared libraries, so that gnatbind is -- called with -shared. Check also if gnatbind is called with -- -shared, so that gnatlink is called with -shared-libgcc -- for GCC version 3 and above, ensuring that the shared -- version of libgcc will be used. if Main_Project /= No_Project and then MLib.Tgt.Support_For_Libraries /= MLib.Tgt.None then for Proj in Projects.First .. Projects.Last loop if Projects.Table (Proj).Library and then Projects.Table (Proj).Library_Kind /= Static then Shared_Libs := True; Bind_Shared := Shared_Switch'Access; exit; end if; end loop; end if; -- Check now for switch -shared if not Shared_Libs then for J in Binder_Switches.First .. Last_Arg loop if Binder_Switches.Table (J).all = "-shared" then Shared_Libs := True; exit; end if; end loop; end if; -- If there are shared libraries, invoke gnatlink with -- -shared-libgcc if GCC version is 3 or more. if Shared_Libs and then GCC_Version >= 3 then Link_With_Shared_Libgcc := Shared_Libgcc_Switch'Access; end if; -- Get all the binder switches for J in Binder_Switches.First .. Last_Arg loop Args (J) := Binder_Switches.Table (J); end loop; if There_Are_Stand_Alone_Libraries then Last_Arg := Last_Arg + 1; Args (Last_Arg) := Force_Elab_Flags_String'Access; end if; if Main_Project /= No_Project then -- Put all the source directories in ADA_INCLUDE_PATH, -- and all the object directories in ADA_OBJECTS_PATH Prj.Env.Set_Ada_Paths (Main_Project, False); -- If switch -C was specified, create a binder mapping file if Create_Mapping_File then Create_Binder_Mapping_File (Args, Last_Arg); end if; end if; begin Bind (Main_ALI_File, Bind_Shared.all & Args (Args'First .. Last_Arg)); exception when others => -- If -dn was not specified, delete the temporary mapping -- file, if one was created. if not Debug.Debug_Flag_N and then Mapping_Path /= No_Name then Delete_File (Get_Name_String (Mapping_Path), Discard); end if; -- And reraise the exception raise; end; -- If -dn was not specified, delete the temporary mapping file, -- if one was created. if not Debug.Debug_Flag_N and then Mapping_Path /= No_Name then Delete_File (Get_Name_String (Mapping_Path), Discard); end if; end Bind_Step; end if; if Do_Link_Step then Link_Step : declare There_Are_Libraries : Boolean := False; Linker_Switches_Last : constant Integer := Linker_Switches.Last; Path_Option : constant String_Access := MLib.Linker_Library_Path_Option; Current : Natural; Proj2 : Project_Id; Depth : Natural; begin if not Run_Path_Option then Linker_Switches.Increment_Last; Linker_Switches.Table (Linker_Switches.Last) := new String'("-R"); end if; if Main_Project /= No_Project then Library_Paths.Set_Last (0); Library_Projs.Init; if MLib.Tgt.Support_For_Libraries /= MLib.Tgt.None then -- Check for library projects for Proj1 in 1 .. Projects.Last loop if Proj1 /= Main_Project and then Projects.Table (Proj1).Library then -- Add this project to table Library_Projs There_Are_Libraries := True; Depth := Projects.Table (Proj1).Depth; Library_Projs.Increment_Last; Current := Library_Projs.Last; -- Any project with a greater depth should be -- after this project in the list. while Current > 1 loop Proj2 := Library_Projs.Table (Current - 1); exit when Projects.Table (Proj2).Depth <= Depth; Library_Projs.Table (Current) := Proj2; Current := Current - 1; end loop; Library_Projs.Table (Current) := Proj1; -- If it is not a static library and path option -- is set, add it to the Library_Paths table. if Projects.Table (Proj1).Library_Kind /= Static and then Path_Option /= null then Library_Paths.Increment_Last; Library_Paths.Table (Library_Paths.Last) := new String' (Get_Name_String (Projects.Table (Proj1).Library_Dir)); end if; end if; end loop; for Index in 1 .. Library_Projs.Last loop -- Add the -L switch Linker_Switches.Increment_Last; Linker_Switches.Table (Linker_Switches.Last) := new String'("-L" & Get_Name_String (Projects.Table (Library_Projs.Table (Index)). Library_Dir)); -- Add the -l switch Linker_Switches.Increment_Last; Linker_Switches.Table (Linker_Switches.Last) := new String'("-l" & Get_Name_String (Projects.Table (Library_Projs.Table (Index)). Library_Name)); end loop; end if; if There_Are_Libraries then -- If Path_Option is not null, create the switch -- ("-Wl,-rpath," or equivalent) with all the non static -- library dirs plus the standard GNAT library dir. -- We do that only if Run_Path_Option is True -- (not disabled by -R switch). if Run_Path_Option and Path_Option /= null then declare Option : String_Access; Length : Natural := Path_Option'Length; Current : Natural; begin for Index in Library_Paths.First .. Library_Paths.Last loop -- Add the length of the library dir plus one -- for the directory separator. Length := Length + Library_Paths.Table (Index)'Length + 1; end loop; -- Finally, add the length of the standard GNAT -- library dir. Length := Length + MLib.Utl.Lib_Directory'Length; Option := new String (1 .. Length); Option (1 .. Path_Option'Length) := Path_Option.all; Current := Path_Option'Length; -- Put each library dir followed by a dir separator for Index in Library_Paths.First .. Library_Paths.Last loop Option (Current + 1 .. Current + Library_Paths.Table (Index)'Length) := Library_Paths.Table (Index).all; Current := Current + Library_Paths.Table (Index)'Length + 1; Option (Current) := Path_Separator; end loop; -- Finally put the standard GNAT library dir Option (Current + 1 .. Current + MLib.Utl.Lib_Directory'Length) := MLib.Utl.Lib_Directory; -- And add the switch to the linker switches Linker_Switches.Increment_Last; Linker_Switches.Table (Linker_Switches.Last) := Option; end; end if; end if; -- Put the object directories in ADA_OBJECTS_PATH Prj.Env.Set_Ada_Paths (Main_Project, False); -- Check for attributes Linker'Linker_Options in projects -- other than the main project declare Linker_Options : constant String_List := Linker_Options_Switches (Main_Project); begin for Option in Linker_Options'Range loop Linker_Switches.Increment_Last; Linker_Switches.Table (Linker_Switches.Last) := Linker_Options (Option); end loop; end; end if; declare Args : Argument_List (Linker_Switches.First .. Linker_Switches.Last + 2); Last_Arg : Integer := Linker_Switches.First - 1; Skip : Boolean := False; begin -- Get all the linker switches for J in Linker_Switches.First .. Linker_Switches.Last loop if Skip then Skip := False; elsif Non_Std_Executable and then Linker_Switches.Table (J).all = "-o" then Skip := True; else Last_Arg := Last_Arg + 1; Args (Last_Arg) := Linker_Switches.Table (J); end if; end loop; -- If need be, add the -o switch if Non_Std_Executable then Last_Arg := Last_Arg + 1; Args (Last_Arg) := new String'("-o"); Last_Arg := Last_Arg + 1; Args (Last_Arg) := new String'(Get_Name_String (Executable)); end if; -- And invoke the linker begin Link (Main_ALI_File, Link_With_Shared_Libgcc.all & Args (Args'First .. Last_Arg)); Successful_Links.Increment_Last; Successful_Links.Table (Successful_Links.Last) := Main_ALI_File; exception when Link_Failed => if Osint.Number_Of_Files = 1 or not Keep_Going then raise; else Write_Line ("*** link failed"); Failed_Links.Increment_Last; Failed_Links.Table (Failed_Links.Last) := Main_ALI_File; end if; end; end; Linker_Switches.Set_Last (Linker_Switches_Last); end Link_Step; end if; -- We go to here when we skip the bind and link steps <> -- We go to the next main, if we did not process the last one if N_File < Osint.Number_Of_Files then Main_Source_File := Next_Main_Source; if Current_File_Index /= No_Index then Main_Index := Current_File_Index; end if; if Main_Project /= No_Project then -- Find the file name of the main unit declare Main_Source_File_Name : constant String := Get_Name_String (Main_Source_File); Main_Unit_File_Name : constant String := Prj.Env. File_Name_Of_Library_Unit_Body (Name => Main_Source_File_Name, Project => Main_Project, Main_Project_Only => not Unique_Compile); The_Packages : constant Package_Id := Projects.Table (Main_Project).Decl.Packages; Binder_Package : constant Prj.Package_Id := Prj.Util.Value_Of (Name => Name_Binder, In_Packages => The_Packages); Linker_Package : constant Prj.Package_Id := Prj.Util.Value_Of (Name => Name_Linker, In_Packages => The_Packages); begin -- We fail if we cannot find the main source file -- as an immediate source of the main project file. if Main_Unit_File_Name = "" then Make_Failed ('"' & Main_Source_File_Name, """ is not a unit of project ", Project_File_Name.all & "."); else -- Remove any directory information from the main -- source file name. declare Pos : Natural := Main_Unit_File_Name'Last; begin loop exit when Pos < Main_Unit_File_Name'First or else Main_Unit_File_Name (Pos) = Directory_Separator; Pos := Pos - 1; end loop; Name_Len := Main_Unit_File_Name'Last - Pos; Name_Buffer (1 .. Name_Len) := Main_Unit_File_Name (Pos + 1 .. Main_Unit_File_Name'Last); Main_Source_File := Name_Find; end; end if; -- We now deal with the binder and linker switches. -- If no project file is used, there is nothing to do -- because the binder and linker switches are the same -- for all mains. -- Reset the tables Binder_Switches and Linker_Switches Binder_Switches.Set_Last (Last_Binder_Switch); Linker_Switches.Set_Last (Last_Linker_Switch); -- Add binder switches from the project file for this main, -- if any. if Do_Bind_Step and Binder_Package /= No_Package then if Verbose_Mode then Write_Str ("Adding binder switches for """); Write_Str (Main_Unit_File_Name); Write_Line ("""."); end if; Add_Switches (File_Name => Main_Unit_File_Name, Index => Main_Index, The_Package => Binder_Package, Program => Binder); end if; -- Add linker switches from the project file for this main, -- if any. if Do_Link_Step and Linker_Package /= No_Package then if Verbose_Mode then Write_Str ("Adding linker switches for"""); Write_Str (Main_Unit_File_Name); Write_Line ("""."); end if; Add_Switches (File_Name => Main_Unit_File_Name, Index => Main_Index, The_Package => Linker_Package, Program => Linker); end if; -- As we are using a project file, for relative paths we add -- the current working directory for any relative path on -- the command line and the project directory, for any -- relative path in the project file. declare Dir_Path : constant String_Access := new String'(Get_Name_String (Projects.Table (Main_Project).Directory)); begin for J in Last_Binder_Switch + 1 .. Binder_Switches.Last loop Test_If_Relative_Path (Binder_Switches.Table (J), Parent => Dir_Path, Including_L_Switch => False); end loop; for J in Last_Linker_Switch + 1 .. Linker_Switches.Last loop Test_If_Relative_Path (Linker_Switches.Table (J), Parent => Dir_Path); end loop; end; -- We now put in the Binder_Switches and Linker_Switches -- tables, the binder and linker switches of the command -- line that have been put in the Saved_ tables. -- These switches will follow the project file switches. for J in 1 .. Saved_Binder_Switches.Last loop Add_Switch (Saved_Binder_Switches.Table (J), Binder, And_Save => False); end loop; for J in 1 .. Saved_Linker_Switches.Last loop Add_Switch (Saved_Linker_Switches.Table (J), Linker, And_Save => False); end loop; end; end if; end if; -- Remove all marks to be sure to check sources for all executables, -- as the switches may be different and -s may be in use. Delete_All_Marks; end loop Multiple_Main_Loop; if Failed_Links.Last > 0 then for Index in 1 .. Successful_Links.Last loop Write_Str ("Linking of """); Write_Str (Get_Name_String (Successful_Links.Table (Index))); Write_Line (""" succeeded."); end loop; for Index in 1 .. Failed_Links.Last loop Write_Str ("Linking of """); Write_Str (Get_Name_String (Failed_Links.Table (Index))); Write_Line (""" failed."); end loop; if Total_Compilation_Failures = 0 then raise Compilation_Failed; end if; end if; if Total_Compilation_Failures /= 0 then List_Bad_Compilations; raise Compilation_Failed; end if; -- Delete the temporary mapping file that was created if we are -- using project files. if not Debug.Debug_Flag_N then Delete_Mapping_Files; Prj.Env.Delete_All_Path_Files; end if; Exit_Program (E_Success); exception when Bind_Failed => Make_Failed ("*** bind failed."); when Compilation_Failed => if not Debug.Debug_Flag_N then Delete_Mapping_Files; Prj.Env.Delete_All_Path_Files; end if; Exit_Program (E_Fatal); when Link_Failed => Make_Failed ("*** link failed."); when X : others => Write_Line (Exception_Information (X)); Make_Failed ("INTERNAL ERROR. Please report."); end Gnatmake; ---------- -- Hash -- ---------- function Hash (F : Name_Id) return Header_Num is begin return Header_Num (1 + F mod Max_Header); end Hash; -------------------- -- In_Ada_Lib_Dir -- -------------------- function In_Ada_Lib_Dir (File : File_Name_Type) return Boolean is D : constant Name_Id := Get_Directory (File); B : constant Byte := Get_Name_Table_Byte (D); begin return (B and Ada_Lib_Dir) /= 0; end In_Ada_Lib_Dir; ------------ -- Inform -- ------------ procedure Inform (N : Name_Id := No_Name; Msg : String) is begin Osint.Write_Program_Name; Write_Str (": "); if N /= No_Name then Write_Str (""""); Write_Name (N); Write_Str (""" "); end if; Write_Str (Msg); Write_Eol; end Inform; ----------------------- -- Init_Mapping_File -- ----------------------- procedure Init_Mapping_File (Project : Project_Id; File_Index : in out Natural) is FD : File_Descriptor; Status : Boolean; -- For call to Close begin -- Increase the index of the last mapping file for this project Last_Mapping_File_Names (Project) := Last_Mapping_File_Names (Project) + 1; -- If there is a project file, call Create_Mapping_File with -- the project id. if Project /= No_Project then Prj.Env.Create_Mapping_File (Project, The_Mapping_File_Names (Project, Last_Mapping_File_Names (Project))); -- Otherwise, just create an empty file else Tempdir.Create_Temp_File (FD, The_Mapping_File_Names (No_Project, Last_Mapping_File_Names (No_Project))); if FD = Invalid_FD then Make_Failed ("disk full"); end if; Close (FD, Status); if not Status then Make_Failed ("disk full"); end if; end if; -- And return the index of the newly created file File_Index := Last_Mapping_File_Names (Project); end Init_Mapping_File; ------------ -- Init_Q -- ------------ procedure Init_Q is begin First_Q_Initialization := False; Q_Front := Q.First; Q.Set_Last (Q.First); end Init_Q; ---------------- -- Initialize -- ---------------- procedure Initialize is begin -- Override default initialization of Check_Object_Consistency -- since this is normally False for GNATBIND, but is True for -- GNATMAKE since we do not need to check source consistency -- again once GNATMAKE has looked at the sources to check. Check_Object_Consistency := True; -- Package initializations. The order of calls is important here Output.Set_Standard_Error; Gcc_Switches.Init; Binder_Switches.Init; Linker_Switches.Init; Csets.Initialize; Namet.Initialize; Snames.Initialize; Prj.Initialize; Dependencies.Init; RTS_Specified := null; Mains.Delete; -- Add the directory where gnatmake is invoked in front of the -- path, if gnatmake is invoked with directory information. -- Only do this if the platform is not VMS, where the notion of path -- does not really exist. if not OpenVMS then declare Command : constant String := Command_Name; begin for Index in reverse Command'Range loop if Command (Index) = Directory_Separator then declare Absolute_Dir : constant String := Normalize_Pathname (Command (Command'First .. Index)); PATH : constant String := Absolute_Dir & Path_Separator & Getenv ("PATH").all; begin Setenv ("PATH", PATH); end; exit; end if; end loop; end; end if; -- Scan the switches and arguments Scan_Args : for Next_Arg in 1 .. Argument_Count loop Scan_Make_Arg (Argument (Next_Arg), And_Save => True); end loop Scan_Args; if Usage_Requested then Usage; end if; -- Test for trailing -P switch if Project_File_Name_Present and then Project_File_Name = null then Make_Failed ("project file name missing after -P"); -- Test for trailing -o switch elsif Output_File_Name_Present and then not Output_File_Name_Seen then Make_Failed ("output file name missing after -o"); -- Test for trailing -D switch elsif Object_Directory_Present and then not Object_Directory_Seen then Make_Failed ("object directory missing after -D"); end if; -- Test for simultaneity of -i and -D if Object_Directory_Path /= null and then In_Place_Mode then Make_Failed ("-i and -D cannot be used simutaneously"); end if; -- Deal with -C= switch if Gnatmake_Mapping_File /= null then -- First, check compatibility with other switches if Project_File_Name /= null then Make_Failed ("-C= switch is not compatible with -P switch"); elsif Saved_Maximum_Processes > 1 then Make_Failed ("-C= switch is not compatible with -jnnn switch"); end if; Fmap.Initialize (Gnatmake_Mapping_File.all); Add_Switch ("-gnatem=" & Gnatmake_Mapping_File.all, Compiler, And_Save => True); end if; if Project_File_Name /= null then -- A project file was specified by a -P switch if Verbose_Mode then Write_Eol; Write_Str ("Parsing Project File """); Write_Str (Project_File_Name.all); Write_Str ("""."); Write_Eol; end if; -- Avoid looking in the current directory for ALI files -- Look_In_Primary_Dir := False; -- Set the project parsing verbosity to whatever was specified -- by a possible -vP switch. Prj.Pars.Set_Verbosity (To => Current_Verbosity); -- Parse the project file. -- If there is an error, Main_Project will still be No_Project. Prj.Pars.Parse (Project => Main_Project, Project_File_Name => Project_File_Name.all, Packages_To_Check => Packages_To_Check_By_Gnatmake); if Main_Project = No_Project then Make_Failed ("""", Project_File_Name.all, """ processing failed"); end if; if Verbose_Mode then Write_Eol; Write_Str ("Parsing of Project File """); Write_Str (Project_File_Name.all); Write_Str (""" is finished."); Write_Eol; end if; -- We add the source directories and the object directories -- to the search paths. Add_Source_Directories (Main_Project); Add_Object_Directories (Main_Project); -- Compute depth of each project for Proj in 1 .. Projects.Last loop Projects.Table (Proj).Seen := False; Projects.Table (Proj).Depth := 0; end loop; Recursive_Compute_Depth (Main_Project, Depth => 1); else Osint.Add_Default_Search_Dirs; -- Source file lookups should be cached for efficiency. -- Source files are not supposed to change. However, we do that now -- only if no project file is used; if a project file is used, we -- do it just after changing the directory to the object directory. Osint.Source_File_Data (Cache => True); -- Read gnat.adc file to initialize Fname.UF Fname.UF.Initialize; begin Fname.SF.Read_Source_File_Name_Pragmas; exception when Err : SFN_Scan.Syntax_Error_In_GNAT_ADC => Make_Failed (Exception_Message (Err)); end; end if; -- Make sure no project object directory is recorded Project_Object_Directory := No_Project; end Initialize; ---------------------------- -- Insert_Project_Sources -- ---------------------------- procedure Insert_Project_Sources (The_Project : Project_Id; All_Projects : Boolean; Into_Q : Boolean) is Put_In_Q : Boolean := Into_Q; Unit : Com.Unit_Data; Sfile : Name_Id; Extending : constant Boolean := Projects.Table (The_Project).Extends /= No_Project; function Check_Project (P : Project_Id) return Boolean; -- Returns True if P is The_Project or a project extended by -- The_Project. ------------------- -- Check_Project -- ------------------- function Check_Project (P : Project_Id) return Boolean is begin if All_Projects or P = The_Project then return True; elsif Extending then declare Data : Project_Data := Projects.Table (The_Project); begin loop if P = Data.Extends then return True; end if; Data := Projects.Table (Data.Extends); exit when Data.Extends = No_Project; end loop; end; end if; return False; end Check_Project; -- Start of processing of Insert_Project_Sources begin -- For all the sources in the project files, for Id in Com.Units.First .. Com.Units.Last loop Unit := Com.Units.Table (Id); Sfile := No_Name; -- If there is a source for the body, and the body has not been -- locally removed, if Unit.File_Names (Com.Body_Part).Name /= No_Name and then Unit.File_Names (Com.Body_Part).Path /= Slash then -- And it is a source for the specified project if Check_Project (Unit.File_Names (Com.Body_Part).Project) then -- If we don't have a spec, we cannot consider the source -- if it is a subunit if Unit.File_Names (Com.Specification).Name = No_Name then declare Src_Ind : Source_File_Index; -- Here we are cheating a little bit: we don't want to -- use Sinput.L, because it depends on the GNAT tree -- (Atree, Sinfo, ...). So, we pretend that it is -- a project file, and we use Sinput.P. -- Source_File_Is_Subunit is just scanning through -- the file until it finds one of the reserved words -- separate, procedure, function, generic or package. -- Fortunately, these Ada reserved words are also -- reserved for project files. begin Src_Ind := Sinput.P.Load_Project_File (Get_Name_String (Unit.File_Names (Com.Body_Part).Path)); -- If it is a subunit, discard it if Sinput.P.Source_File_Is_Subunit (Src_Ind) then Sfile := No_Name; else Sfile := Unit.File_Names (Com.Body_Part).Name; end if; end; else Sfile := Unit.File_Names (Com.Body_Part).Name; end if; end if; elsif Unit.File_Names (Com.Specification).Name /= No_Name and then Unit.File_Names (Com.Specification).Path /= Slash and then Check_Project (Unit.File_Names (Com.Specification).Project) then -- If there is no source for the body, but there is a source -- for the spec which has not been locally removed, then we take -- this one. Sfile := Unit.File_Names (Com.Specification).Name; end if; -- If Put_In_Q is True, we insert into the Q if Put_In_Q then -- For the first source inserted into the Q, we need -- to initialize the Q, but not for the subsequent sources. if First_Q_Initialization then Init_Q; end if; -- And of course, we only insert in the Q if the source -- is not marked. if Sfile /= No_Name and then not Is_Marked (Sfile) then if Verbose_Mode then Write_Str ("Adding """); Write_Str (Get_Name_String (Sfile)); Write_Line (""" to the queue"); end if; Insert_Q (Sfile); Mark (Sfile); end if; elsif Sfile /= No_Name then -- If Put_In_Q is False, we add the source as it it were -- specified on the command line, and we set Put_In_Q to True, -- so that the following sources will be put directly in the -- queue. This will allow parallel compilation processes if -jx -- switch is used. if Verbose_Mode then Write_Str ("Adding """); Write_Str (Get_Name_String (Sfile)); Write_Line (""" as if on the command line"); end if; Osint.Add_File (Get_Name_String (Sfile)); Put_In_Q := True; end if; end loop; end Insert_Project_Sources; -------------- -- Insert_Q -- -------------- procedure Insert_Q (Source_File : File_Name_Type; Source_Unit : Unit_Name_Type := No_Name; Index : Int := 0) is begin if Debug.Debug_Flag_Q then Write_Str (" Q := Q + [ "); Write_Name (Source_File); if Index /= 0 then Write_Str (", "); Write_Int (Index); end if; Write_Str (" ] "); Write_Eol; end if; Q.Table (Q.Last) := (File => Source_File, Unit => Source_Unit, Index => Index); Q.Increment_Last; end Insert_Q; --------------------- -- Is_In_Obsoleted -- --------------------- function Is_In_Obsoleted (F : Name_Id) return Boolean is begin if F = No_File then return False; else declare Name : constant String := Get_Name_String (F); First : Natural := Name'Last; F2 : Name_Id := F; begin while First > Name'First and then Name (First - 1) /= Directory_Separator and then Name (First - 1) /= '/' loop First := First - 1; end loop; if First /= Name'First then Name_Len := 0; Add_Str_To_Name_Buffer (Name (First .. Name'Last)); F2 := Name_Find; end if; return Obsoleted.Get (F2); end; end if; end Is_In_Obsoleted; ---------------------------- -- Is_In_Object_Directory -- ---------------------------- function Is_In_Object_Directory (Source_File : File_Name_Type; Full_Lib_File : File_Name_Type) return Boolean is begin -- There is something to check only when using project files. -- Otherwise, this function returns True (last line of the function). if Main_Project /= No_Project then declare Source_File_Name : constant String := Get_Name_String (Source_File); Saved_Verbosity : constant Verbosity := Prj.Com.Current_Verbosity; Project : Project_Id := No_Project; Path_Name : Name_Id := No_Name; Data : Project_Data; begin -- Call Get_Reference to know the ultimate extending project of -- the source. Call it with verbosity default to avoid verbose -- messages. Prj.Com.Current_Verbosity := Default; Prj.Env. Get_Reference (Source_File_Name => Source_File_Name, Project => Project, Path => Path_Name); Prj.Com.Current_Verbosity := Saved_Verbosity; -- If this source is in a project, check that the ALI file is -- in its object directory. If it is not, return False, so that -- the ALI file will not be skipped. -- If the source is not in an extending project, we fall back to -- the general case and return True at the end of the function. if Project /= No_Project and then Projects.Table (Project).Extends /= No_Project then Data := Projects.Table (Project); declare Object_Directory : constant String := Normalize_Pathname (Get_Name_String (Data.Object_Directory)); Olast : Natural := Object_Directory'Last; Lib_File_Directory : constant String := Normalize_Pathname (Dir_Name (Get_Name_String (Full_Lib_File))); Llast : Natural := Lib_File_Directory'Last; begin -- For directories, Normalize_Pathname may or may not put -- a directory separator at the end, depending on its input. -- Remove any last directory separator before comparaison. -- Returns True only if the two directories are the same. if Object_Directory (Olast) = Directory_Separator then Olast := Olast - 1; end if; if Lib_File_Directory (Llast) = Directory_Separator then Llast := Llast - 1; end if; return Object_Directory (Object_Directory'First .. Olast) = Lib_File_Directory (Lib_File_Directory'First .. Llast); end; end if; end; end if; -- When the source is not in a project file, always return True return True; end Is_In_Object_Directory; ---------- -- Link -- ---------- procedure Link (ALI_File : File_Name_Type; Args : Argument_List) is Link_Args : Argument_List (1 .. Args'Length + 1); Success : Boolean; begin Get_Name_String (ALI_File); Link_Args (1) := new String'(Name_Buffer (1 .. Name_Len)); Link_Args (2 .. Args'Length + 1) := Args; GNAT.OS_Lib.Normalize_Arguments (Link_Args); Display (Gnatlink.all, Link_Args); if Gnatlink_Path = null then Make_Failed ("error, unable to locate ", Gnatlink.all); end if; GNAT.OS_Lib.Spawn (Gnatlink_Path.all, Link_Args, Success); if not Success then raise Link_Failed; end if; end Link; --------------------------- -- List_Bad_Compilations -- --------------------------- procedure List_Bad_Compilations is begin for J in Bad_Compilation.First .. Bad_Compilation.Last loop if Bad_Compilation.Table (J).File = No_File then null; elsif not Bad_Compilation.Table (J).Found then Inform (Bad_Compilation.Table (J).File, "not found"); else Inform (Bad_Compilation.Table (J).File, "compilation error"); end if; end loop; end List_Bad_Compilations; ----------------- -- List_Depend -- ----------------- procedure List_Depend is Lib_Name : Name_Id; Obj_Name : Name_Id; Src_Name : Name_Id; Len : Natural; Line_Pos : Natural; Line_Size : constant := 77; begin Set_Standard_Output; for A in ALIs.First .. ALIs.Last loop Lib_Name := ALIs.Table (A).Afile; -- We have to provide the full library file name in In_Place_Mode if In_Place_Mode then Lib_Name := Full_Lib_File_Name (Lib_Name); end if; Obj_Name := Object_File_Name (Lib_Name); Write_Name (Obj_Name); Write_Str (" :"); Get_Name_String (Obj_Name); Len := Name_Len; Line_Pos := Len + 2; for D in ALIs.Table (A).First_Sdep .. ALIs.Table (A).Last_Sdep loop Src_Name := Sdep.Table (D).Sfile; if Is_Internal_File_Name (Src_Name) and then not Check_Readonly_Files then null; else if not Quiet_Output then Src_Name := Full_Source_Name (Src_Name); end if; Get_Name_String (Src_Name); Len := Name_Len; if Line_Pos + Len + 1 > Line_Size then Write_Str (" \"); Write_Eol; Line_Pos := 0; end if; Line_Pos := Line_Pos + Len + 1; Write_Str (" "); Write_Name (Src_Name); end if; end loop; Write_Eol; end loop; Set_Standard_Error; end List_Depend; ----------------- -- Make_Failed -- ----------------- procedure Make_Failed (S1 : String; S2 : String := ""; S3 : String := "") is begin Delete_All_Temp_Files; Osint.Fail (S1, S2, S3); end Make_Failed; -------------------- -- Mark_Directory -- -------------------- procedure Mark_Directory (Dir : String; Mark : Lib_Mark_Type) is N : Name_Id; B : Byte; begin -- Dir last character is supposed to be a directory separator Name_Len := Dir'Length; Name_Buffer (1 .. Name_Len) := Dir; if not Is_Directory_Separator (Name_Buffer (Name_Len)) then Name_Len := Name_Len + 1; Name_Buffer (Name_Len) := Directory_Separator; end if; -- Add flags to the already existing flags N := Name_Find; B := Get_Name_Table_Byte (N); Set_Name_Table_Byte (N, B or Mark); end Mark_Directory; ----------------------------- -- Recursive_Compute_Depth -- ----------------------------- procedure Recursive_Compute_Depth (Project : Project_Id; Depth : Natural) is List : Project_List; Proj : Project_Id; begin -- Nothing to do if there is no project or if the project has already -- been seen or if the depth is large enough. if Project = No_Project or else Projects.Table (Project).Seen or else Projects.Table (Project).Depth >= Depth then return; end if; Projects.Table (Project).Depth := Depth; -- Mark the project as Seen to avoid endless loop caused by limited -- withs. Projects.Table (Project).Seen := True; List := Projects.Table (Project).Imported_Projects; -- Visit each imported project while List /= Empty_Project_List loop Proj := Project_Lists.Table (List).Project; List := Project_Lists.Table (List).Next; Recursive_Compute_Depth (Project => Proj, Depth => Depth + 1); end loop; -- Visit a project being extended, if any Recursive_Compute_Depth (Project => Projects.Table (Project).Extends, Depth => Depth + 1); -- Reset the Seen flag, as we leave this project Projects.Table (Project).Seen := False; end Recursive_Compute_Depth; ----------------------- -- Sigint_Intercpted -- ----------------------- procedure Sigint_Intercepted is begin Write_Line ("*** Interrupted ***"); Delete_All_Temp_Files; OS_Exit (1); end Sigint_Intercepted; ------------------- -- Scan_Make_Arg -- ------------------- procedure Scan_Make_Arg (Argv : String; And_Save : Boolean) is begin pragma Assert (Argv'First = 1); if Argv'Length = 0 then return; end if; -- If the previous switch has set the Project_File_Name_Present -- flag (that is we have seen a -P alone), then the next argument is -- the name of the project file. if Project_File_Name_Present and then Project_File_Name = null then if Argv (1) = '-' then Make_Failed ("project file name missing after -P"); else Project_File_Name_Present := False; Project_File_Name := new String'(Argv); end if; -- If the previous switch has set the Output_File_Name_Present -- flag (that is we have seen a -o), then the next argument is -- the name of the output executable. elsif Output_File_Name_Present and then not Output_File_Name_Seen then Output_File_Name_Seen := True; if Argv (1) = '-' then Make_Failed ("output file name missing after -o"); else Add_Switch ("-o", Linker, And_Save => And_Save); -- Automatically add the executable suffix if it has not been -- specified explicitly. declare Canonical_Argv : String := Argv; begin -- Get the file name in canonical case to accept as is -- names ending with ".EXE" on VMS and Windows. Canonical_Case_File_Name (Canonical_Argv); if Executable_Suffix'Length /= 0 and then (Canonical_Argv'Length <= Executable_Suffix'Length or else Canonical_Argv (Canonical_Argv'Last - Executable_Suffix'Length + 1 .. Canonical_Argv'Last) /= Executable_Suffix) then Add_Switch (Argv & Executable_Suffix, Linker, And_Save => And_Save); else Add_Switch (Argv, Linker, And_Save => And_Save); end if; end; end if; -- If the previous switch has set the Object_Directory_Present flag -- (that is we have seen a -D), then the next argument is -- the path name of the object directory.. elsif Object_Directory_Present and then not Object_Directory_Seen then Object_Directory_Seen := True; if Argv (1) = '-' then Make_Failed ("object directory path name missing after -D"); elsif not Is_Directory (Argv) then Make_Failed ("cannot find object directory """, Argv, """"); else Add_Lib_Search_Dir (Argv); -- Specify the object directory to the binder Add_Switch ("-aO" & Argv, Binder, And_Save => And_Save); -- Record the object directory. Make sure it ends with a directory -- separator. if Argv (Argv'Last) = Directory_Separator then Object_Directory_Path := new String'(Argv); else Object_Directory_Path := new String'(Argv & Directory_Separator); end if; end if; -- Then check if we are dealing with -cargs/-bargs/-largs/-margs elsif Argv = "-bargs" or else Argv = "-cargs" or else Argv = "-largs" or else Argv = "-margs" then case Argv (2) is when 'c' => Program_Args := Compiler; when 'b' => Program_Args := Binder; when 'l' => Program_Args := Linker; when 'm' => Program_Args := None; when others => raise Program_Error; end case; -- A special test is needed for the -o switch within a -largs -- since that is another way to specify the name of the final -- executable. elsif Program_Args = Linker and then Argv = "-o" then Make_Failed ("switch -o not allowed within a -largs. " & "Use -o directly."); -- Check to see if we are reading switches after a -cargs, -- -bargs or -largs switch. If yes save it. elsif Program_Args /= None then -- Check to see if we are reading -I switches in order -- to take into account in the src & lib search directories. if Argv'Length > 2 and then Argv (1 .. 2) = "-I" then if Argv (3 .. Argv'Last) = "-" then Look_In_Primary_Dir := False; elsif Program_Args = Compiler then if Argv (3 .. Argv'Last) /= "-" then Add_Src_Search_Dir (Argv (3 .. Argv'Last)); end if; elsif Program_Args = Binder then Add_Lib_Search_Dir (Argv (3 .. Argv'Last)); end if; end if; Add_Switch (Argv, Program_Args, And_Save => And_Save); -- Handle non-default compiler, binder, linker, and handle --RTS switch elsif Argv'Length > 2 and then Argv (1 .. 2) = "--" then if Argv'Length > 6 and then Argv (1 .. 6) = "--GCC=" then declare Program_Args : constant Argument_List_Access := Argument_String_To_List (Argv (7 .. Argv'Last)); begin if And_Save then Saved_Gcc := new String'(Program_Args.all (1).all); else Gcc := new String'(Program_Args.all (1).all); end if; for J in 2 .. Program_Args.all'Last loop Add_Switch (Program_Args.all (J).all, Compiler, And_Save => And_Save); end loop; end; elsif Argv'Length > 11 and then Argv (1 .. 11) = "--GNATBIND=" then declare Program_Args : constant Argument_List_Access := Argument_String_To_List (Argv (12 .. Argv'Last)); begin if And_Save then Saved_Gnatbind := new String'(Program_Args.all (1).all); else Gnatbind := new String'(Program_Args.all (1).all); end if; for J in 2 .. Program_Args.all'Last loop Add_Switch (Program_Args.all (J).all, Binder, And_Save => And_Save); end loop; end; elsif Argv'Length > 11 and then Argv (1 .. 11) = "--GNATLINK=" then declare Program_Args : constant Argument_List_Access := Argument_String_To_List (Argv (12 .. Argv'Last)); begin if And_Save then Saved_Gnatlink := new String'(Program_Args.all (1).all); else Gnatlink := new String'(Program_Args.all (1).all); end if; for J in 2 .. Program_Args.all'Last loop Add_Switch (Program_Args.all (J).all, Linker); end loop; end; elsif Argv'Length >= 5 and then Argv (1 .. 5) = "--RTS" then Add_Switch (Argv, Compiler, And_Save => And_Save); Add_Switch (Argv, Binder, And_Save => And_Save); if Argv'Length <= 6 or else Argv (6) /= '=' then Make_Failed ("missing path for --RTS"); else -- Check that this is the first time we see this switch or -- if it is not the first time, the same path is specified. if RTS_Specified = null then RTS_Specified := new String'(Argv (7 .. Argv'Last)); elsif RTS_Specified.all /= Argv (7 .. Argv'Last) then Make_Failed ("--RTS cannot be specified multiple times"); end if; -- Valid --RTS switch No_Stdinc := True; No_Stdlib := True; RTS_Switch := True; declare Src_Path_Name : constant String_Ptr := Get_RTS_Search_Dir (Argv (7 .. Argv'Last), Include); Lib_Path_Name : constant String_Ptr := Get_RTS_Search_Dir (Argv (7 .. Argv'Last), Objects); begin if Src_Path_Name /= null and then Lib_Path_Name /= null then -- Set the RTS_*_Path_Name variables, so that the correct -- directories will be set when -- Osint.Add_Default_Search_Dirs will be called later. RTS_Src_Path_Name := Src_Path_Name; RTS_Lib_Path_Name := Lib_Path_Name; elsif Src_Path_Name = null and Lib_Path_Name = null then Make_Failed ("RTS path not valid: missing " & "adainclude and adalib directories"); elsif Src_Path_Name = null then Make_Failed ("RTS path not valid: missing adainclude " & "directory"); elsif Lib_Path_Name = null then Make_Failed ("RTS path not valid: missing adalib " & "directory"); end if; end; end if; else Make_Failed ("unknown switch: ", Argv); end if; -- If we have seen a regular switch process it elsif Argv (1) = '-' then if Argv'Length = 1 then Make_Failed ("switch character cannot be followed by a blank"); -- -I- elsif Argv (2 .. Argv'Last) = "I-" then Look_In_Primary_Dir := False; -- Forbid -?- or -??- where ? is any character elsif (Argv'Length = 3 and then Argv (3) = '-') or else (Argv'Length = 4 and then Argv (4) = '-') then Make_Failed ("trailing ""-"" at the end of ", Argv, " forbidden."); -- -Idir elsif Argv (2) = 'I' then Add_Src_Search_Dir (Argv (3 .. Argv'Last)); Add_Lib_Search_Dir (Argv (3 .. Argv'Last)); Add_Switch (Argv, Compiler, And_Save => And_Save); Add_Switch (Argv, Binder, And_Save => And_Save); -- -aIdir (to gcc this is like a -I switch) elsif Argv'Length >= 3 and then Argv (2 .. 3) = "aI" then Add_Src_Search_Dir (Argv (4 .. Argv'Last)); Add_Switch ("-I" & Argv (4 .. Argv'Last), Compiler, And_Save => And_Save); Add_Switch (Argv, Binder, And_Save => And_Save); -- -aOdir elsif Argv'Length >= 3 and then Argv (2 .. 3) = "aO" then Add_Lib_Search_Dir (Argv (4 .. Argv'Last)); Add_Switch (Argv, Binder, And_Save => And_Save); -- -aLdir (to gnatbind this is like a -aO switch) elsif Argv'Length >= 3 and then Argv (2 .. 3) = "aL" then Mark_Directory (Argv (4 .. Argv'Last), Ada_Lib_Dir); Add_Lib_Search_Dir (Argv (4 .. Argv'Last)); Add_Switch ("-aO" & Argv (4 .. Argv'Last), Binder, And_Save => And_Save); -- -Adir (to gnatbind this is like a -aO switch, to gcc like a -I) elsif Argv (2) = 'A' then Mark_Directory (Argv (3 .. Argv'Last), Ada_Lib_Dir); Add_Src_Search_Dir (Argv (3 .. Argv'Last)); Add_Lib_Search_Dir (Argv (3 .. Argv'Last)); Add_Switch ("-I" & Argv (3 .. Argv'Last), Compiler, And_Save => And_Save); Add_Switch ("-aO" & Argv (3 .. Argv'Last), Binder, And_Save => And_Save); -- -Ldir elsif Argv (2) = 'L' then Add_Switch (Argv, Linker, And_Save => And_Save); -- For -gxxxxx, -pg, -mxxx, -fxxx: give the switch to both the -- compiler and the linker (except for -gnatxxx which is only for -- the compiler). Some of the -mxxx (for example -m64) and -fxxx -- (for example -ftest-coverage for gcov) need to be used when -- compiling the binder generated files, and using all these gcc -- switches for the binder generated files should not be a problem. elsif (Argv (2) = 'g' and then (Argv'Last < 5 or else Argv (2 .. 5) /= "gnat")) or else Argv (2 .. Argv'Last) = "pg" or else (Argv (2) = 'm' and then Argv'Last > 2) or else (Argv (2) = 'f' and then Argv'Last > 2) then Add_Switch (Argv, Compiler, And_Save => And_Save); Add_Switch (Argv, Linker, And_Save => And_Save); -- -C= elsif Argv'Last > 2 and then Argv (2) = 'C' then if And_Save then if Argv (3) /= '=' or else Argv'Last <= 3 then Make_Failed ("illegal switch ", Argv); end if; Gnatmake_Mapping_File := new String'(Argv (4 .. Argv'Last)); end if; -- -D elsif Argv'Last = 2 and then Argv (2) = 'D' then if Project_File_Name /= null then Make_Failed ("-D cannot be used in conjunction with a " & "project file"); else Scan_Make_Switches (Argv); end if; -- -d elsif Argv (2) = 'd' and then Argv'Last = 2 then Display_Compilation_Progress := True; -- -i elsif Argv'Last = 2 and then Argv (2) = 'i' then if Project_File_Name /= null then Make_Failed ("-i cannot be used in conjunction with a " & "project file"); else Scan_Make_Switches (Argv); end if; -- -j (need to save the result) elsif Argv (2) = 'j' then Scan_Make_Switches (Argv); if And_Save then Saved_Maximum_Processes := Maximum_Processes; end if; -- -m elsif Argv (2) = 'm' and then Argv'Last = 2 then Minimal_Recompilation := True; -- -u elsif Argv (2) = 'u' and then Argv'Last = 2 then Unique_Compile := True; Compile_Only := True; Do_Bind_Step := False; Do_Link_Step := False; -- -U elsif Argv (2) = 'U' and then Argv'Last = 2 then Unique_Compile_All_Projects := True; Unique_Compile := True; Compile_Only := True; Do_Bind_Step := False; Do_Link_Step := False; -- -Pprj or -P prj (only once, and only on the command line) elsif Argv (2) = 'P' then if Project_File_Name /= null then Make_Failed ("cannot have several project files specified"); elsif Object_Directory_Path /= null then Make_Failed ("-D cannot be used in conjunction with a " & "project file"); elsif In_Place_Mode then Make_Failed ("-i cannot be used in conjunction with a " & "project file"); elsif not And_Save then -- It could be a tool other than gnatmake (i.e, gnatdist) -- or a -P switch inside a project file. Fail ("either the tool is not ""project-aware"" or " & "a project file is specified inside a project file"); elsif Argv'Last = 2 then -- -P is used alone: the project file name is the next option Project_File_Name_Present := True; else Project_File_Name := new String'(Argv (3 .. Argv'Last)); end if; -- -vPx (verbosity of the parsing of the project files) elsif Argv'Last = 4 and then Argv (2 .. 3) = "vP" and then Argv (4) in '0' .. '2' then if And_Save then case Argv (4) is when '0' => Current_Verbosity := Prj.Default; when '1' => Current_Verbosity := Prj.Medium; when '2' => Current_Verbosity := Prj.High; when others => null; end case; end if; -- -Xext=val (External assignment) elsif Argv (2) = 'X' and then Is_External_Assignment (Argv) then -- Is_External_Assignment has side effects -- when it returns True; null; -- If -gnath is present, then generate the usage information -- right now and do not pass this option on to the compiler calls. elsif Argv = "-gnath" then Usage; -- If -gnatc is specified, make sure the bind step and the link -- step are not executed. elsif Argv'Length >= 6 and then Argv (2 .. 6) = "gnatc" then -- If -gnatc is specified, make sure the bind step and the link -- step are not executed. Add_Switch (Argv, Compiler, And_Save => And_Save); Operating_Mode := Check_Semantics; Check_Object_Consistency := False; Compile_Only := True; Do_Bind_Step := False; Do_Link_Step := False; elsif Argv (2 .. Argv'Last) = "nostdlib" then -- Don't pass -nostdlib to gnatlink, it will disable -- linking with all standard library files. No_Stdlib := True; Add_Switch (Argv, Compiler, And_Save => And_Save); Add_Switch (Argv, Binder, And_Save => And_Save); elsif Argv (2 .. Argv'Last) = "nostdinc" then -- Pass -nostdinc to the Compiler and to gnatbind No_Stdinc := True; Add_Switch (Argv, Compiler, And_Save => And_Save); Add_Switch (Argv, Binder, And_Save => And_Save); -- By default all switches with more than one character -- or one character switches which are not in 'a' .. 'z' -- (except 'C', 'F', 'M' and 'B') are passed to the compiler, -- unless we are dealing with a debug switch (starts with 'd') -- or an extended gnatmake switch (starts with 'e'). elsif Argv (2) /= 'd' and then Argv (2) /= 'e' and then Argv (2 .. Argv'Last) /= "C" and then Argv (2 .. Argv'Last) /= "F" and then Argv (2 .. Argv'Last) /= "M" and then Argv (2 .. Argv'Last) /= "B" and then (Argv'Length > 2 or else Argv (2) not in 'a' .. 'z') then Add_Switch (Argv, Compiler, And_Save => And_Save); -- All other options are handled by Scan_Make_Switches else Scan_Make_Switches (Argv); end if; -- If not a switch it must be a file name else Add_File (Argv); Mains.Add_Main (Argv); end if; end Scan_Make_Arg; ----------------- -- Switches_Of -- ----------------- function Switches_Of (Source_File : Name_Id; Source_File_Name : String; Source_Index : Int; Naming : Naming_Data; In_Package : Package_Id; Allow_ALI : Boolean) return Variable_Value is Switches : Variable_Value; Defaults : constant Array_Element_Id := Prj.Util.Value_Of (Name => Name_Default_Switches, In_Arrays => Packages.Table (In_Package).Decl.Arrays); Switches_Array : constant Array_Element_Id := Prj.Util.Value_Of (Name => Name_Switches, In_Arrays => Packages.Table (In_Package).Decl.Arrays); begin Switches := Prj.Util.Value_Of (Index => Source_File, Src_Index => Source_Index, In_Array => Switches_Array); if Switches = Nil_Variable_Value then declare Name : String (1 .. Source_File_Name'Length + 3); Last : Positive := Source_File_Name'Length; Spec_Suffix : constant String := Get_Name_String (Naming.Ada_Spec_Suffix); Body_Suffix : constant String := Get_Name_String (Naming.Ada_Body_Suffix); Truncated : Boolean := False; begin Name (1 .. Last) := Source_File_Name; if Last > Body_Suffix'Length and then Name (Last - Body_Suffix'Length + 1 .. Last) = Body_Suffix then Truncated := True; Last := Last - Body_Suffix'Length; end if; if not Truncated and then Last > Spec_Suffix'Length and then Name (Last - Spec_Suffix'Length + 1 .. Last) = Spec_Suffix then Truncated := True; Last := Last - Spec_Suffix'Length; end if; if Truncated then Name_Len := Last; Name_Buffer (1 .. Name_Len) := Name (1 .. Last); Switches := Prj.Util.Value_Of (Index => Name_Find, Src_Index => 0, In_Array => Switches_Array); if Switches = Nil_Variable_Value and then Allow_ALI then Last := Source_File_Name'Length; while Name (Last) /= '.' loop Last := Last - 1; end loop; Name (Last + 1 .. Last + 3) := "ali"; Name_Len := Last + 3; Name_Buffer (1 .. Name_Len) := Name (1 .. Name_Len); Switches := Prj.Util.Value_Of (Index => Name_Find, Src_Index => 0, In_Array => Switches_Array); end if; end if; end; end if; if Switches = Nil_Variable_Value then Switches := Prj.Util.Value_Of (Index => Name_Ada, Src_Index => 0, In_Array => Defaults); end if; return Switches; end Switches_Of; ----------- -- Usage -- ----------- procedure Usage is begin if Usage_Needed then Usage_Needed := False; Makeusg; end if; end Usage; ----------------- -- Verbose_Msg -- ----------------- procedure Verbose_Msg (N1 : Name_Id; S1 : String; N2 : Name_Id := No_Name; S2 : String := ""; Prefix : String := " -> ") is begin if not Verbose_Mode then return; end if; Write_Str (Prefix); Write_Str (""""); Write_Name (N1); Write_Str (""" "); Write_Str (S1); if N2 /= No_Name then Write_Str (" """); Write_Name (N2); Write_Str (""" "); end if; Write_Str (S2); Write_Eol; end Verbose_Msg; begin -- Make sure that in case of failure, the temp files will be deleted Prj.Com.Fail := Make_Failed'Access; MLib.Fail := Make_Failed'Access; Makeutl.Do_Fail := Make_Failed'Access; end Make;