# # snmp.conf - snmp configuration directives # # This file is *NOT* included by default. To enable it, you will need # to modify the SNMP CONFIGURATION section of "radiusd.conf". # ####################################################################### ####################################################################### # # SNMP configuration # # NOTE: This part is only working if your radiusd is compiled with SNMP # support. # # smux_password: Password used for SMUX registration. # # Specifies password used when connecting to the SNMP master agent. # This must match the password as configured on the agent. The OID # used to register the radius subagent is 1.3.6.1.4.1.3317.1.3.1. # A sample entry for the ucd-snmp deamon looks like this: # # smuxpeer .1.3.6.1.4.1.3317.1.3.1 verysecret # # A sample entry for AIX 4.3 is: # # smux 1.3.6.1.4.1.3317.1.3.1 verysecret # # The default password is an empty password. # #smux_password = verysecret # # snmp_write_access: # # Controls if write access to the radiusd via SNMP is enabled or not. # Set this value to yes, if you want to be able to reload radiusd from # your network management station. # # For this to work, you also have to make sure that your master agent # is configured to allow SNMP set requests. For security reasons, this # setting defaults to no. # # allowed values: {no, yes} # #snmp_write_access = yes