#
#  Configuration for the SQL module, when using MSSQL.
#
#  The database schema is available at:
#
#	doc/examples/mssql.sql
#
#  $Id: mssql.conf,v 1.6.4.2 2007/07/13 15:47:31 pnixon Exp $
#
sql {

	# Database type
	# Current supported are: rlm_sql_mysql, rlm_sql_postgresql,
	# rlm_sql_iodbc, rlm_sql_oracle, rlm_sql_unixodbc
	driver = "rlm_sql_unixodbc"

	# Connect info
	server = "localhost"
	login = "root"
	password = "rootpass"

	# Database table configuration
	radius_db = "radius"

	# If you want both stop and start records logged to the
	# same SQL table, leave this as is.  If you want them in
	# different tables, put the start table in acct_table1
	# and stop table in acct_table2
	acct_table1 = "radacct"
	acct_table2 = "radacct"

	authcheck_table = "radcheck"
	authreply_table = "radreply"

	groupcheck_table = "radgroupcheck"
	groupreply_table = "radgroupreply"

	usergroup_table = "usergroup"

	# Remove stale session if checkrad does not see a double login
	deletestalesessions = yes

	# Print all SQL statements when in debug mode (-x)
	sqltrace = no
	sqltracefile = ${logdir}/sqltrace.sql

	# number of sql connections to make to server
	num_sql_socks = 5

	# Safe characters list for sql queries. Everything else is replaced
	# with their mime-encoded equivalents.
	# The default list should be ok
	#safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"

	#######################################################################
	#  Query config:  Username
	#######################################################################
	# This is the username that will get substituted, escaped, and added
	# as attribute 'SQL-User-Name'.  '%{SQL-User-Name}' should be used
	# below everywhere a username substitution is needed so you you can
	# be sure the username passed from the client is escaped properly.
	#
	# Uncomment the next line, if you want the sql_user_name to mean:
	#
	#    Use Stripped-User-Name, if it's there.
	#    Else use User-Name, if it's there,
	#    Else use hard-coded string "none" as the user name.
	#sql_user_name = "%{Stripped-User-Name:-%{User-Name:-none}}"
	#
	sql_user_name = "%{User-Name}"


	#######################################################################
	#  Authorization Queries
	#######################################################################
	#  These queries compare the check items for the user
	#  in ${authcheck_table} and setup the reply items in
	#  ${authreply_table}.  You can use any query/tables
	#  you want, but the return data for each row MUST
	#  be in the  following order:
	#
	#  0. Row ID (currently unused)
	#  1. UserName/GroupName
	#  2. Item Attr Name
	#  3. Item Attr Value
	#  4. Item Attr Operation
	#######################################################################
	# Query for case sensitive usernames was removed. Please contact with me,
	# if you know analog of STRCMP functions for MS SQL.

	authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
	authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"

	authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op  FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
	authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op  FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"


	#######################################################################
	#  Accounting Queries
	#######################################################################
	# accounting_onoff_query	- query for Accounting On/Off packets
	# accounting_update_query	- query for Accounting update packets
	# accounting_update_query_alt	- query for Accounting update packets
	#                               (alternate in case first query fails)
	# accounting_start_query	- query for Accounting start packets
	# accounting_start_query_alt	- query for Accounting start packets
	#                               (alternate in case first query fails)
	# accounting_stop_query		- query for Accounting stop packets
	# accounting_stop_query_alt	- query for Accounting start packets
	#                               (alternate in case first query doesn't
	#                                affect any existing rows in the table)
	#######################################################################
	accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"

	accounting_update_query = "UPDATE ${acct_table1} SET FramedIPAddress = '%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime = 0"

	accounting_update_query_alt = "INSERT into ${acct_table1} (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) \
 VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"

	# accounting_start_query: Inserting of RadAcctId and AcctStopTime was
	# removed. These fields are processing by a database
	accounting_start_query = "INSERT into ${acct_table1} (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) \
 VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%{X-Ascend-Session-Svr-Key}')"

	accounting_start_query_alt  = "UPDATE ${acct_table1} SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"

	accounting_stop_query = "UPDATE ${acct_table2} SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"

	# accounting_stop_query_alt: Inserting of RadAcctId and AcctStartTime was
	# removed. These fields are processing by a database
	accounting_stop_query_alt = "INSERT into ${acct_table2} (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"

}