(defcustom case-replace t
"*Non-nil means `query-replace' should preserve case in replacements."
:type 'boolean
:group 'matching)
(defvar query-replace-history nil)
(defvar query-replace-interactive nil
"Non-nil means `query-replace' uses the last search string.
That becomes the \"string to replace\".")
(defcustom query-replace-from-history-variable 'query-replace-history
"History list to use for the FROM argument of `query-replace' commands.
The value of this variable should be a symbol; that symbol
is used as a variable to hold a history list for the strings
or patterns to be replaced."
:group 'matching
:type 'symbol
:version "20.3")
(defcustom query-replace-to-history-variable 'query-replace-history
"History list to use for the TO argument of `query-replace' commands.
The value of this variable should be a symbol; that symbol
is used as a variable to hold a history list for replacement
strings or patterns."
:group 'matching
:type 'symbol
:version "20.3")
(defun query-replace-read-args (string regexp-flag)
(let (from to)
(if query-replace-interactive
(setq from (car (if regexp-flag regexp-search-ring search-ring)))
(setq from (read-from-minibuffer (format "%s: " string)
nil nil nil
query-replace-from-history-variable
nil t)))
(setq to (read-from-minibuffer (format "%s %s with: " string from)
nil nil nil
query-replace-to-history-variable from t))
(if (and transient-mark-mode mark-active)
(list from to current-prefix-arg (region-beginning) (region-end))
(list from to current-prefix-arg nil nil))))
(defun query-replace (from-string to-string &optional delimited start end)
"Replace some occurrences of FROM-STRING with TO-STRING.
As each match is found, the user must type a character saying
what to do with it. For directions, type \\[help-command] at that time.
In Transient Mark mode, if the mark is active, operate on the contents
of the region. Otherwise, operate from point to the end of the buffer.
If `query-replace-interactive' is non-nil, the last incremental search
string is used as FROM-STRING--you don't have to specify it with the
minibuffer.
Replacement transfers the case of the old text to the new text,
if `case-replace' and `case-fold-search'
are non-nil and FROM-STRING has no uppercase letters.
\(Preserving case means that if the string matched is all caps, or capitalized,
then its replacement is upcased or capitalized.)
Third arg DELIMITED (prefix arg if interactive), if non-nil, means replace
only matches surrounded by word boundaries.
Fourth and fifth arg START and END specify the region to operate on.
To customize possible responses, change the \"bindings\" in `query-replace-map'."
(interactive (query-replace-read-args "Query replace" nil))
(perform-replace from-string to-string t nil delimited nil nil start end))
(define-key esc-map "%" 'query-replace)
(defun query-replace-regexp (regexp to-string &optional delimited start end)
"Replace some things after point matching REGEXP with TO-STRING.
As each match is found, the user must type a character saying
what to do with it. For directions, type \\[help-command] at that time.
In Transient Mark mode, if the mark is active, operate on the contents
of the region. Otherwise, operate from point to the end of the buffer.
If `query-replace-interactive' is non-nil, the last incremental search
regexp is used as REGEXP--you don't have to specify it with the
minibuffer.
Preserves case in each replacement if `case-replace' and `case-fold-search'
are non-nil and REGEXP has no uppercase letters.
Third arg DELIMITED (prefix arg if interactive), if non-nil, means replace
only matches surrounded by word boundaries.
Fourth and fifth arg START and END specify the region to operate on.
In TO-STRING, `\\&' stands for whatever matched the whole of REGEXP,
and `\\=\\N' (where N is a digit) stands for
whatever what matched the Nth `\\(...\\)' in REGEXP."
(interactive (query-replace-read-args "Query replace regexp" t))
(perform-replace regexp to-string t t delimited nil nil start end))
(define-key esc-map [?\C-%] 'query-replace-regexp)
(defun query-replace-regexp-eval (regexp to-expr &optional delimited start end)
"Replace some things after point matching REGEXP with the result of TO-EXPR.
As each match is found, the user must type a character saying
what to do with it. For directions, type \\[help-command] at that time.
TO-EXPR is a Lisp expression evaluated to compute each replacement. It may
reference `replace-count' to get the number of replacements already made.
If the result of TO-EXPR is not a string, it is converted to one using
`prin1-to-string' with the NOESCAPE argument (which see).
For convenience, when entering TO-EXPR interactively, you can use `\\&' or
`\\0' to stand for whatever matched the whole of REGEXP, and `\\N' (where
N is a digit) to stand for whatever matched the Nth `\\(...\\)' in REGEXP.
Use `\\#&' or `\\#N' if you want a number instead of a string.
In Transient Mark mode, if the mark is active, operate on the contents
of the region. Otherwise, operate from point to the end of the buffer.
If `query-replace-interactive' is non-nil, the last incremental search
regexp is used as REGEXP--you don't have to specify it with the
minibuffer.
Preserves case in each replacement if `case-replace' and `case-fold-search'
are non-nil and REGEXP has no uppercase letters.
Third arg DELIMITED (prefix arg if interactive), if non-nil, means replace
only matches that are surrounded by word boundaries.
Fourth and fifth arg START and END specify the region to operate on."
(interactive
(let (from to start end)
(when (and transient-mark-mode mark-active)
(setq start (region-beginning)
end (region-end)))
(if query-replace-interactive
(setq from (car regexp-search-ring))
(setq from (read-from-minibuffer "Query replace regexp: "
nil nil nil
query-replace-from-history-variable
nil t)))
(setq to (list (read-from-minibuffer
(format "Query replace regexp %s with eval: " from)
nil nil t query-replace-to-history-variable from t)))
(replace-match-string-symbols to)
(list from (car to) current-prefix-arg start end)))
(perform-replace regexp (cons 'replace-eval-replacement to-expr)
t t delimited nil nil start end))
(defun map-query-replace-regexp (regexp to-strings &optional n start end)
"Replace some matches for REGEXP with various strings, in rotation.
The second argument TO-STRINGS contains the replacement strings,
separated by spaces. Third arg DELIMITED (prefix arg if interactive),
if non-nil, means replace only matches surrounded by word boundaries.
This command works like `query-replace-regexp' except that each
successive replacement uses the next successive replacement string,
wrapping around from the last such string to the first.
In Transient Mark mode, if the mark is active, operate on the contents
of the region. Otherwise, operate from point to the end of the buffer.
Non-interactively, TO-STRINGS may be a list of replacement strings.
If `query-replace-interactive' is non-nil, the last incremental search
regexp is used as REGEXP--you don't have to specify it with the minibuffer.
A prefix argument N says to use each replacement string N times
before rotating to the next.
Fourth and fifth arg START and END specify the region to operate on."
(interactive
(let (from to start end)
(when (and transient-mark-mode mark-active)
(setq start (region-beginning)
end (region-end)))
(setq from (if query-replace-interactive
(car regexp-search-ring)
(read-from-minibuffer "Map query replace (regexp): "
nil nil nil
'query-replace-history nil t)))
(setq to (read-from-minibuffer
(format "Query replace %s with (space-separated strings): "
from)
nil nil nil
'query-replace-history from t))
(list from to start end current-prefix-arg)))
(let (replacements)
(if (listp to-strings)
(setq replacements to-strings)
(while (/= (length to-strings) 0)
(if (string-match " " to-strings)
(setq replacements
(append replacements
(list (substring to-strings 0
(string-match " " to-strings))))
to-strings (substring to-strings
(1+ (string-match " " to-strings))))
(setq replacements (append replacements (list to-strings))
to-strings ""))))
(perform-replace regexp replacements t t nil n nil start end)))
(defun replace-string (from-string to-string &optional delimited start end)
"Replace occurrences of FROM-STRING with TO-STRING.
Preserve case in each match if `case-replace' and `case-fold-search'
are non-nil and FROM-STRING has no uppercase letters.
\(Preserving case means that if the string matched is all caps, or capitalized,
then its replacement is upcased or capitalized.)
In Transient Mark mode, if the mark is active, operate on the contents
of the region. Otherwise, operate from point to the end of the buffer.
Third arg DELIMITED (prefix arg if interactive), if non-nil, means replace
only matches surrounded by word boundaries.
Fourth and fifth arg START and END specify the region to operate on.
If `query-replace-interactive' is non-nil, the last incremental search
string is used as FROM-STRING--you don't have to specify it with the
minibuffer.
This function is usually the wrong thing to use in a Lisp program.
What you probably want is a loop like this:
(while (search-forward FROM-STRING nil t)
(replace-match TO-STRING nil t))
which will run faster and will not set the mark or print anything.
\(You may need a more complex loop if FROM-STRING can match the null string
and TO-STRING is also null.)"
(interactive (query-replace-read-args "Replace string" nil))
(perform-replace from-string to-string nil nil delimited nil nil start end))
(defun replace-regexp (regexp to-string &optional delimited start end)
"Replace things after point matching REGEXP with TO-STRING.
Preserve case in each match if `case-replace' and `case-fold-search'
are non-nil and REGEXP has no uppercase letters.
In Transient Mark mode, if the mark is active, operate on the contents
of the region. Otherwise, operate from point to the end of the buffer.
Third arg DELIMITED (prefix arg if interactive), if non-nil, means replace
only matches surrounded by word boundaries.
Fourth and fifth arg START and END specify the region to operate on.
In TO-STRING, `\\&' stands for whatever matched the whole of REGEXP,
and `\\=\\N' (where N is a digit) stands for
whatever what matched the Nth `\\(...\\)' in REGEXP.
If `query-replace-interactive' is non-nil, the last incremental search
regexp is used as REGEXP--you don't have to specify it with the minibuffer.
This function is usually the wrong thing to use in a Lisp program.
What you probably want is a loop like this:
(while (re-search-forward REGEXP nil t)
(replace-match TO-STRING nil nil))
which will run faster and will not set the mark or print anything."
(interactive (query-replace-read-args "Replace regexp" t))
(perform-replace regexp to-string nil t delimited nil nil start end))
(defvar regexp-history nil
"History list for some commands that read regular expressions.")
(defalias 'delete-non-matching-lines 'keep-lines)
(defalias 'delete-matching-lines 'flush-lines)
(defalias 'count-matches 'how-many)
(defun keep-lines-read-args (prompt)
"Read arguments for `keep-lines' and friends.
Prompt for a regexp with PROMPT.
Value is a list, (REGEXP)."
(list (read-from-minibuffer prompt nil nil nil
'regexp-history nil t)))
(defun keep-lines (regexp &optional rstart rend)
"Delete all lines except those containing matches for REGEXP.
A match split across lines preserves all the lines it lies in.
Applies to all lines after point.
If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive.
Second and third arg RSTART and REND specify the region to operate on.
Interactively, in Transient Mark mode when the mark is active, operate
on the contents of the region. Otherwise, operate from point to the
end of the buffer."
(interactive
(keep-lines-read-args "Keep lines (containing match for regexp): "))
(if rstart
(goto-char (min rstart rend))
(if (and transient-mark-mode mark-active)
(setq rstart (region-beginning)
rend (copy-marker (region-end)))
(setq rstart (point)
rend (point-max-marker)))
(goto-char rstart))
(save-excursion
(or (bolp) (forward-line 1))
(let ((start (point))
(case-fold-search (and case-fold-search
(isearch-no-upper-case-p regexp t))))
(while (< (point) rend)
(if (not (re-search-forward regexp rend 'move))
(delete-region start rend)
(let ((end (save-excursion (goto-char (match-beginning 0))
(beginning-of-line)
(point))))
(if (< start end)
(delete-region start end))))
(setq start (save-excursion (forward-line 1) (point)))
(and (< (point) rend)
(= (match-beginning 0) (match-end 0))
(forward-char 1))))))
(defun flush-lines (regexp &optional rstart rend)
"Delete lines containing matches for REGEXP.
If a match is split across lines, all the lines it lies in are deleted.
Applies to lines after point.
If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive.
Second and third arg RSTART and REND specify the region to operate on.
Interactively, in Transient Mark mode when the mark is active, operate
on the contents of the region. Otherwise, operate from point to the
end of the buffer."
(interactive
(keep-lines-read-args "Flush lines (containing match for regexp): "))
(if rstart
(goto-char (min rstart rend))
(if (and transient-mark-mode mark-active)
(setq rstart (region-beginning)
rend (copy-marker (region-end)))
(setq rstart (point)
rend (point-max-marker)))
(goto-char rstart))
(let ((case-fold-search (and case-fold-search
(isearch-no-upper-case-p regexp t))))
(save-excursion
(while (and (< (point) rend)
(re-search-forward regexp rend t))
(delete-region (save-excursion (goto-char (match-beginning 0))
(beginning-of-line)
(point))
(progn (forward-line 1) (point)))))))
(defun how-many (regexp &optional rstart rend)
"Print number of matches for REGEXP following point.
If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive.
Second and third arg RSTART and REND specify the region to operate on.
Interactively, in Transient Mark mode when the mark is active, operate
on the contents of the region. Otherwise, operate from point to the
end of the buffer."
(interactive
(keep-lines-read-args "How many matches for (regexp): "))
(save-excursion
(if rstart
(goto-char (min rstart rend))
(if (and transient-mark-mode mark-active)
(setq rstart (region-beginning)
rend (copy-marker (region-end)))
(setq rstart (point)
rend (point-max-marker)))
(goto-char rstart))
(let ((count 0)
opoint
(case-fold-search (and case-fold-search
(isearch-no-upper-case-p regexp t))))
(while (and (< (point) rend)
(progn (setq opoint (point))
(re-search-forward regexp rend t)))
(if (= opoint (point))
(forward-char 1)
(setq count (1+ count))))
(message "%d occurrences" count))))
(defvar occur-mode-map
(let ((map (make-sparse-keymap)))
(define-key map [mouse-2] 'occur-mode-mouse-goto)
(define-key map "\C-c\C-c" 'occur-mode-goto-occurrence)
(define-key map "\C-m" 'occur-mode-goto-occurrence)
(define-key map "\M-n" 'occur-next)
(define-key map "\M-p" 'occur-prev)
(define-key map "g" 'revert-buffer)
map)
"Keymap for `occur-mode'.")
(defvar occur-buffer nil
"Name of buffer for last occur.")
(defvar occur-nlines nil
"Number of lines of context to show around matching line.")
(defvar occur-command-arguments nil
"Arguments that were given to `occur' when it made this buffer.")
(put 'occur-mode 'mode-class 'special)
(define-derived-mode occur-mode nil "Occur"
"Major mode for output from \\[occur].
\\<occur-mode-map>Move point to one of the items in this buffer, then use
\\[occur-mode-goto-occurrence] to go to the occurrence that the item refers to.
Alternatively, click \\[occur-mode-mouse-goto] on an item to go to it.
\\{occur-mode-map}"
(set (make-local-variable 'revert-buffer-function) 'occur-revert-function)
(make-local-variable 'occur-buffer)
(make-local-variable 'occur-nlines)
(make-local-variable 'occur-command-arguments))
(defun occur-revert-function (ignore1 ignore2)
"Handle `revert-buffer' for *Occur* buffers."
(let ((args occur-command-arguments ))
(save-excursion
(set-buffer occur-buffer)
(apply 'occur args))))
(defun occur-mode-mouse-goto (event)
"In Occur mode, go to the occurrence whose line you click on."
(interactive "e")
(let (buffer pos)
(save-excursion
(set-buffer (window-buffer (posn-window (event-end event))))
(save-excursion
(goto-char (posn-point (event-end event)))
(setq pos (occur-mode-find-occurrence))
(setq buffer occur-buffer)))
(pop-to-buffer buffer)
(goto-char (marker-position pos))))
(defun occur-mode-find-occurrence ()
(if (or (null occur-buffer)
(null (buffer-name occur-buffer)))
(progn
(setq occur-buffer nil)
(error "Buffer in which occurrences were found is deleted")))
(let ((pos (get-text-property (point) 'occur)))
(if (null pos)
(error "No occurrence on this line")
pos)))
(defun occur-mode-goto-occurrence ()
"Go to the occurrence the current line describes."
(interactive)
(let ((pos (occur-mode-find-occurrence)))
(pop-to-buffer occur-buffer)
(goto-char (marker-position pos))))
(defun occur-next (&optional n)
"Move to the Nth (default 1) next match in the *Occur* buffer."
(interactive "p")
(if (not n) (setq n 1))
(let ((r))
(while (> n 0)
(if (get-text-property (point) 'occur-point)
(forward-char 1))
(setq r (next-single-property-change (point) 'occur-point))
(if r
(goto-char r)
(error "No more matches"))
(setq n (1- n)))))
(defun occur-prev (&optional n)
"Move to the Nth (default 1) previous match in the *Occur* buffer."
(interactive "p")
(if (not n) (setq n 1))
(let ((r))
(while (> n 0)
(setq r (get-text-property (point) 'occur-point))
(if r (forward-char -1))
(setq r (previous-single-property-change (point) 'occur-point))
(if r
(goto-char (- r 1))
(error "No earlier matches"))
(setq n (1- n)))))
(defcustom list-matching-lines-default-context-lines 0
"*Default number of context lines included around `list-matching-lines' matches.
A negative number means to include that many lines before the match.
A positive number means to include that many lines both before and after."
:type 'integer
:group 'matching)
(defalias 'list-matching-lines 'occur)
(defvar list-matching-lines-face 'bold
"*Face used by \\[list-matching-lines] to show the text that matches.
If the value is nil, don't highlight the matching portions specially.")
(defun occur (regexp &optional nlines)
"Show all lines in the current buffer containing a match for REGEXP.
If a match spreads across multiple lines, all those lines are shown.
Each line is displayed with NLINES lines before and after, or -NLINES
before if NLINES is negative.
NLINES defaults to `list-matching-lines-default-context-lines'.
Interactively it is the prefix arg.
The lines are shown in a buffer named `*Occur*'.
It serves as a menu to find any of the occurrences in this buffer.
\\<occur-mode-map>\\[describe-mode] in that buffer will explain how.
If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive."
(interactive
(list (let* ((default (car regexp-history))
(input
(read-from-minibuffer
(if default
(format "List lines matching regexp (default `%s'): "
default)
"List lines matching regexp: ")
nil nil nil 'regexp-history default t)))
(and (equal input "") default
(setq input default))
input)
current-prefix-arg))
(let* ((nlines (if nlines
(prefix-numeric-value nlines)
list-matching-lines-default-context-lines))
(current-tab-width tab-width)
(inhibit-read-only t)
(min-line-number-width 6)
(line-number-width (1- (* (/ (- (+ min-line-number-width
tab-width)
1)
tab-width)
tab-width)))
(line-number-format (format "%%%dd" line-number-width))
(empty (make-string line-number-width ?\ ))
(first t)
(occur-num-matches 0)
(buffer (current-buffer))
(dir default-directory)
(linenum 1)
(prevpos
(point-min))
(case-fold-search (and case-fold-search
(isearch-no-upper-case-p regexp t)))
(final-context-start
(make-marker)))
(save-excursion
(goto-char (point-min))
(if (not (re-search-forward regexp nil t))
(message "No matches for `%s'" regexp)
(goto-char (match-beginning 0))
(with-output-to-temp-buffer "*Occur*"
(save-excursion
(set-buffer standard-output)
(setq default-directory dir)
(insert " matching ")
(let ((print-escape-newlines t))
(prin1 regexp))
(insert " in buffer " (buffer-name buffer) ?. ?\n)
(occur-mode)
(setq occur-buffer buffer)
(setq occur-nlines nlines)
(setq occur-command-arguments
(list regexp nlines)))
(if (eq buffer standard-output)
(goto-char (point-max)))
(save-excursion
(while (and (not (eobp))
(re-search-forward regexp nil t))
(goto-char (match-beginning 0))
(beginning-of-line)
(save-match-data
(setq linenum (+ linenum (count-lines prevpos (point)))))
(setq prevpos (point))
(goto-char (match-end 0))
(let* ( (start (save-excursion
(goto-char (match-beginning 0))
(forward-line (if (< nlines 0)
nlines
(- nlines)))
(point)))
(end (save-excursion
(goto-char (match-end 0))
(if (> nlines 0)
(forward-line (1+ nlines))
(forward-line 1))
(point)))
(match-beg (- (match-beginning 0) start))
(match-len (- (match-end 0) (match-beginning 0)))
(tag (format line-number-format linenum))
tem
insertion-start
occur-marker
(text-beg
(make-marker))
(text-end
(make-marker)))
(save-excursion
(setq occur-marker (make-marker))
(set-marker occur-marker (point))
(set-buffer standard-output)
(setq occur-num-matches (1+ occur-num-matches))
(or first (zerop nlines)
(insert "--------\n"))
(setq first nil)
(save-excursion
(set-buffer "*Occur*")
(setq tab-width current-tab-width))
(set-marker text-beg (point))
(setq insertion-start (point))
(insert-buffer-substring buffer start end)
(or (and (/= (+ start match-beg) end)
(with-current-buffer buffer
(eq (char-before end) ?\n)))
(insert "\n"))
(set-marker final-context-start
(+ (- (point) (- end (match-end 0)))
(if (save-excursion
(set-buffer buffer)
(save-excursion
(goto-char (match-end 0))
(end-of-line)
(bolp)))
1 0)))
(set-marker text-end (point))
(if list-matching-lines-face
(put-text-property
(+ (marker-position text-beg) match-beg)
(+ (marker-position text-beg) match-beg match-len)
'face list-matching-lines-face))
(put-text-property
(+ (marker-position text-beg) match-beg match-len)
(+ (marker-position text-beg) match-beg match-len 1)
'occur-point t)
(goto-char insertion-start)
(setq tem (if (< linenum nlines)
(- nlines linenum)
nlines))
(while (> tem 0)
(insert empty ?:)
(forward-line 1)
(setq tem (1- tem)))
(let ((this-linenum linenum))
(while (< (point) final-context-start)
(if (null tag)
(setq tag (format line-number-format this-linenum)))
(insert tag ?:)
(forward-line 1)
(setq tag nil)
(setq this-linenum (1+ this-linenum)))
(while (and (not (eobp)) (<= (point) final-context-start))
(insert empty ?:)
(forward-line 1)
(setq this-linenum (1+ this-linenum))))
(while (and (< (point) (point-max)) (< tem nlines))
(insert empty ?:)
(forward-line 1)
(setq tem (1+ tem)))
(add-text-properties
(marker-position text-beg) (- (marker-position text-end) 1)
'(mouse-face highlight
help-echo "mouse-2: go to this occurence"))
(put-text-property (marker-position text-beg)
(marker-position text-end)
'occur occur-marker)
(goto-char (point-max)))
(forward-line 1)))
(set-buffer standard-output)
(goto-char (point-min))
(let ((message-string
(if (= occur-num-matches 1)
"1 line"
(format "%d lines" occur-num-matches))))
(insert message-string)
(if (interactive-p)
(message "%s matched" message-string)))
(setq buffer-read-only t)))))))
(defconst query-replace-help
"Type Space or `y' to replace one match, Delete or `n' to skip to next,
RET or `q' to exit, Period to replace one match and exit,
Comma to replace but not move point immediately,
C-r to enter recursive edit (\\[exit-recursive-edit] to get out again),
C-w to delete match and recursive edit,
C-l to clear the screen, redisplay, and offer same replacement again,
! to replace all remaining matches with no more questions,
^ to move point back to previous match,
E to edit the replacement string"
"Help message while in `query-replace'.")
(defvar query-replace-map (make-sparse-keymap)
"Keymap that defines the responses to questions in `query-replace'.
The \"bindings\" in this map are not commands; they are answers.
The valid answers include `act', `skip', `act-and-show',
`exit', `act-and-exit', `edit', `delete-and-edit', `recenter',
`automatic', `backup', `exit-prefix', and `help'.")
(define-key query-replace-map " " 'act)
(define-key query-replace-map "\d" 'skip)
(define-key query-replace-map [delete] 'skip)
(define-key query-replace-map [backspace] 'skip)
(define-key query-replace-map "y" 'act)
(define-key query-replace-map "n" 'skip)
(define-key query-replace-map "Y" 'act)
(define-key query-replace-map "N" 'skip)
(define-key query-replace-map "e" 'edit-replacement)
(define-key query-replace-map "E" 'edit-replacement)
(define-key query-replace-map "," 'act-and-show)
(define-key query-replace-map "q" 'exit)
(define-key query-replace-map "\r" 'exit)
(define-key query-replace-map [return] 'exit)
(define-key query-replace-map "." 'act-and-exit)
(define-key query-replace-map "\C-r" 'edit)
(define-key query-replace-map "\C-w" 'delete-and-edit)
(define-key query-replace-map "\C-l" 'recenter)
(define-key query-replace-map "!" 'automatic)
(define-key query-replace-map "^" 'backup)
(define-key query-replace-map "\C-h" 'help)
(define-key query-replace-map [f1] 'help)
(define-key query-replace-map [help] 'help)
(define-key query-replace-map "?" 'help)
(define-key query-replace-map "\C-g" 'quit)
(define-key query-replace-map "\C-]" 'quit)
(define-key query-replace-map "\e" 'exit-prefix)
(define-key query-replace-map [escape] 'exit-prefix)
(defun replace-match-string-symbols (n)
"Process a list (and any sub-lists), expanding certain symbols.
Symbol Expands To
N (match-string N) (where N is a string of digits)
#N (string-to-number (match-string N))
& (match-string 0)
#& (string-to-number (match-string 0))
Note that these symbols must be preceeded by a backslash in order to
type them."
(while n
(cond
((consp (car n))
(replace-match-string-symbols (car n))) ((symbolp (car n))
(let ((name (symbol-name (car n))))
(cond
((string-match "^[0-9]+$" name)
(setcar n (list 'match-string (string-to-number name))))
((string-match "^#[0-9]+$" name)
(setcar n (list 'string-to-number
(list 'match-string
(string-to-number (substring name 1))))))
((string= "&" name)
(setcar n '(match-string 0)))
((string= "#&" name)
(setcar n '(string-to-number (match-string 0))))))))
(setq n (cdr n))))
(defun replace-eval-replacement (expression replace-count)
(let ((replacement (eval expression)))
(if (stringp replacement)
replacement
(prin1-to-string replacement t))))
(defun replace-loop-through-replacements (data replace-count)
(if (= (aref data 0) replace-count)
(progn
(aset data 0 (+ replace-count (aref data 1)))
(let ((next (cdr (aref data 2))))
(aset data 2 (if (consp next) next (aref data 3))))))
(car (aref data 2)))
(defun perform-replace (from-string replacements
query-flag regexp-flag delimited-flag
&optional repeat-count map start end)
"Subroutine of `query-replace'. Its complexity handles interactive queries.
Don't use this in your own program unless you want to query and set the mark
just as `query-replace' does. Instead, write a simple loop like this:
(while (re-search-forward \"foo[ \\t]+bar\" nil t)
(replace-match \"foobar\" nil nil))
which will run faster and probably do exactly what you want. Please
see the documentation of `replace-match' to find out how to simulate
`case-replace'."
(or map (setq map query-replace-map))
(and query-flag minibuffer-auto-raise
(raise-frame (window-frame (minibuffer-window))))
(let ((nocasify (not (and case-fold-search case-replace
(string-equal from-string
(downcase from-string)))))
(case-fold-search (and case-fold-search
(string-equal from-string
(downcase from-string))))
(literal (not regexp-flag))
(search-function (if regexp-flag 're-search-forward 'search-forward))
(search-string from-string)
(real-match-data nil) (next-replacement nil)
(keep-going t)
(stack nil)
(replace-count 0)
(nonempty-match nil)
(limit nil)
(match-again t)
(message
(if query-flag
(substitute-command-keys
"Query replacing %s with %s: (\\<query-replace-map>\\[help] for help) "))))
(when start
(setq limit (copy-marker (max start end)))
(goto-char (min start end))
(deactivate-mark))
(cond
((stringp replacements)
(setq next-replacement replacements
replacements nil))
((stringp (car replacements)) (or repeat-count (setq repeat-count 1))
(setq replacements (cons 'replace-loop-through-replacements
(vector repeat-count repeat-count
replacements replacements)))))
(if delimited-flag
(setq search-function 're-search-forward
search-string (concat "\\b"
(if regexp-flag from-string
(regexp-quote from-string))
"\\b")))
(push-mark)
(undo-boundary)
(unwind-protect
(while (and keep-going
(not (eobp))
(setq real-match-data
(if (consp match-again)
(progn (goto-char (nth 1 match-again))
match-again)
(and (or match-again
(progn (forward-char 1) (not (eobp))))
(funcall search-function search-string limit t)
(match-data t real-match-data)))))
(setq nonempty-match
(/= (nth 0 real-match-data) (nth 1 real-match-data)))
(setq match-again
(and nonempty-match
(or (not regexp-flag)
(and (looking-at search-string)
(let ((match (match-data)))
(and (/= (nth 0 match) (nth 1 match))
match))))))
(when replacements
(set-match-data real-match-data)
(setq next-replacement
(funcall (car replacements) (cdr replacements)
replace-count)))
(if (not query-flag)
(progn
(set-match-data real-match-data)
(replace-match next-replacement nocasify literal)
(setq replace-count (1+ replace-count)))
(undo-boundary)
(let (done replaced key def)
(while (not done)
(set-match-data real-match-data)
(replace-highlight (match-beginning 0) (match-end 0))
(let ((message-log-max nil))
(message message from-string next-replacement))
(setq key (read-event))
(set-match-data real-match-data)
(setq key (vector key))
(setq def (lookup-key map key))
(cond ((eq def 'help)
(with-output-to-temp-buffer "*Help*"
(princ
(concat "Query replacing "
(if regexp-flag "regexp " "")
from-string " with "
next-replacement ".\n\n"
(substitute-command-keys
query-replace-help)))
(with-current-buffer standard-output
(help-mode))))
((eq def 'exit)
(setq keep-going nil)
(setq done t))
((eq def 'backup)
(if stack
(let ((elt (car stack)))
(goto-char (car elt))
(setq replaced (eq t (cdr elt)))
(or replaced
(set-match-data (cdr elt)))
(setq stack (cdr stack)))
(message "No previous match")
(ding 'no-terminate)
(sit-for 1)))
((eq def 'act)
(or replaced
(progn
(replace-match next-replacement nocasify literal)
(setq replace-count (1+ replace-count))))
(setq done t replaced t))
((eq def 'act-and-exit)
(or replaced
(progn
(replace-match next-replacement nocasify literal)
(setq replace-count (1+ replace-count))))
(setq keep-going nil)
(setq done t replaced t))
((eq def 'act-and-show)
(if (not replaced)
(progn
(replace-match next-replacement nocasify literal)
(setq replace-count (1+ replace-count))
(setq replaced t))))
((eq def 'automatic)
(or replaced
(progn
(replace-match next-replacement nocasify literal)
(setq replace-count (1+ replace-count))))
(setq done t query-flag nil replaced t))
((eq def 'skip)
(setq done t))
((eq def 'recenter)
(recenter nil))
((eq def 'edit)
(let ((opos (point-marker)))
(goto-char (match-beginning 0))
(save-excursion
(funcall search-function search-string limit t)
(setq real-match-data (match-data)))
(save-excursion (recursive-edit))
(goto-char opos))
(set-match-data real-match-data)
(if (and regexp-flag nonempty-match)
(setq match-again (and (looking-at search-string)
(match-data)))))
((eq def 'edit-replacement)
(setq next-replacement
(read-input "Edit replacement string: "
next-replacement))
(or replaced
(replace-match next-replacement nocasify literal))
(setq done t))
((eq def 'delete-and-edit)
(delete-region (match-beginning 0) (match-end 0))
(set-match-data
(prog1 (match-data)
(save-excursion (recursive-edit))))
(setq replaced t))
(t
(setq this-command 'mode-exited)
(setq keep-going nil)
(setq unread-command-events
(append (listify-key-sequence key)
unread-command-events))
(setq done t))))
(setq stack
(cons (cons (point)
(or replaced (match-data t)))
stack)))))
(when (and regexp-flag (not match-again) (> replace-count 0))
(backward-char 1))
(replace-dehighlight))
(or unread-command-events
(message "Replaced %d occurrence%s"
replace-count
(if (= replace-count 1) "" "s")))
(and keep-going stack)))
(defcustom query-replace-highlight t
"*Non-nil means to highlight words during query replacement."
:type 'boolean
:group 'matching)
(defvar replace-overlay nil)
(defun replace-dehighlight ()
(and replace-overlay
(progn
(delete-overlay replace-overlay)
(setq replace-overlay nil))))
(defun replace-highlight (start end)
(and query-replace-highlight
(progn
(or replace-overlay
(progn
(setq replace-overlay (make-overlay start end))
(overlay-put replace-overlay 'face
(if (facep 'query-replace)
'query-replace 'region))))
(move-overlay replace-overlay start end (current-buffer)))))