Dovecot SSL configuration
=========================

The most important SSL settings are:

---%<-------------------------------------------------------------------------
ssl = yes
# Preferred permissions: root:root 0444
ssl_cert = </etc/ssl/certs/dovecot.pem
# Preferred permissions: root:root 0400
ssl_key = </etc/ssl/private/dovecot.pem
---%<-------------------------------------------------------------------------

The certificate file can be world-readable, since it doesn't contain anything
sensitive (in fact it's sent to each connecting SSL client). The key file's
permissions should be restricted to only root (and possibly ssl-certs group or
similar if your OS uses such). Dovecot opens both of these files while still
running as root, so you don't need to give Dovecot any special permissions to
read them (in fact:*do not give dovecot user any permissions to the key file*).

It's possible to keep the certificate and the key both in the same file:

---%<-------------------------------------------------------------------------
# Preferred permissions: root:root 0400
ssl_cert = </etc/ssl/dovecot.pem
ssl_key = </etc/ssl/dovecot.pem
---%<-------------------------------------------------------------------------

It's also possible to use different certificates for IMAP and POP3. However its
important to note that "ssl = yes" must be set globally if you require SSL for
any protocol (or dovecot will not listen on the SSL ports), which in turn
requires that a certificate and key are specified globally even if you intent
to specify certificates per protocol. The per protocol certificate settings
override the global setting.:

---%<-------------------------------------------------------------------------
protocol imap {
  ssl_cert = </etc/ssl/certs/imap.pem
  ssl_key = </etc/ssl/private/imap.pem
}
protocol pop3 {
  ssl_cert = </etc/ssl/certs/pop3.pem
  ssl_key = </etc/ssl/private/pop3.pem
}
---%<-------------------------------------------------------------------------

There are a couple of different ways to specify when SSL/TLS is required:

 * 'disable_plaintext_auth=yes' allows <plaintext authentication>
   [Authentication.Mechanisms.txt] only when SSL/TLS is used first.
 * 'ssl = required' requires SSL/TLS also for <non-plaintext authentication>
   [Authentication.Mechanisms.txt].
 * If you have only plaintext mechanisms enabled ('auth { mechanisms = plain
   login }'), you can use either (or both) of the above settings. They behave
   exactly the same way then.

Multiple SSL certificates
-------------------------

TLS SNI (Server Name Indication) support required
-------------------------------------------------

/It is important to note that having multiple SSL certificates per IP will not
be compatible with all clients, especially mobile ones. It is a TLS SNI
limitation./

---%<-------------------------------------------------------------------------
local_name imap.example.org {
  ssl_cert = </etc/ssl/certs/imap.example.org.crt
  ssl_key = </etc/ssl/private/imap.example.org.key
}
local_name imap.example2.org {
  ssl_cert = </etc/ssl/certs/imap.example2.org.crt
  ssl_key = </etc/ssl/private/imap.example2.org.key
}
# ..etc..
---%<-------------------------------------------------------------------------

Note that you will still need a top-level "default" 'ssl_key' and 'ssl_cert' as
well, or you will receive errors.

---%<-------------------------------------------------------------------------
# doveconf -n
doveconf: Error: ssl enabled, but ssl_cert not set
---%<-------------------------------------------------------------------------

Different certificates per IP and protocol
------------------------------------------

---%<-------------------------------------------------------------------------
local 192.0.2.10 {
  protocol imap {
    ssl_cert = </etc/ssl/dovecot/imap-01.example.com.cert.pem
    ssl_key  = </etc/ssl/dovecot/imap-01.example.com.key.pem
  }

  protocol pop3 {
    ssl_cert = </etc/ssl/dovecot/pop-01.example.com.cert.pem
    ssl_key  = </etc/ssl/dovecot/pop-01.example.com.key.pem
  }
}

local 192.0.2.20 {
  protocol imap {
    ssl_cert = </etc/ssl/dovecot/imap-02.example.com.cert.pem
    ssl_key  = </etc/ssl/dovecot/imap-02.example.com.key.pem
  }

  protocol pop3 {
    ssl_cert = </etc/ssl/dovecot/pop-02.example.com.cert.pem
    ssl_key  = </etc/ssl/dovecot/pop-02.example.com.key.pem
  }
}
---%<-------------------------------------------------------------------------

Password protected key files
----------------------------

SSL key files may be password protected. There are two ways to provide Dovecot
with the password:

 1. Starting Dovecot with 'dovecot -p' asks the password. It's not stored
    anywhere, so this method prevents Dovecot from starting automatically at
    startup.
 2. 'ssl_key_password' setting. Note that 'dovecot.conf' is by default
    world-readable, so you probably shouldn't place it there directly. Instead
    you could store it in a different file, such as '/etc/dovecot-private.conf'
    containing:

    ---%<---------------------------------------------------------------------
     ssl_key_password = secret
    ---%<---------------------------------------------------------------------

    and then use '!include_try /etc/dovecot-private.conf' in the main
    'dovecot.conf'.

Chained SSL certificates
------------------------

Put all the certificates in the 'ssl_cert' file. For example when using a
certificate signed by TDC the correct order is:

 1. Dovecot's public certificate
 2. TDC SSL Server CA
 3. TDC Internet Root CA
 4. Globalsign Partners CA

SSL security settings
---------------------

When Dovecot starts up for the first time, it generates new 512bit and 1024bit
Diffie Hellman parameters and saves them into
'<prefix>/var/lib/dovecot/ssl-parameters.ssl'. After the initial creation
they're by default regenerated every week. With newer computers the generation
shouldn't take more than a few seconds, but with older computers it can take as
long as half an hour. The extra security gained by the regeneration is quite
small, so with slower computers you might want to disable it:

---%<-------------------------------------------------------------------------
ssl_parameters_regenerate = 0
---%<-------------------------------------------------------------------------

By default Dovecot's allowed ciphers list contains:

---%<-------------------------------------------------------------------------
ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
---%<-------------------------------------------------------------------------

Disallowing more won't really gain any security for those using better ciphers,
but it does prevent people from accidentally using insecure ciphers. See
http://www.openssl.org/docs/apps/ciphers.html for a list of the ciphers.

SSL verbosity
-------------

---%<-------------------------------------------------------------------------
verbose_ssl = yes
---%<-------------------------------------------------------------------------

This will make Dovecot log all the problems it sees with SSL connections. Some
errors might be caused by dropped connections, so it could be quite noisy.

Client certificate verification/authentication
----------------------------------------------

If you want to require clients to present a valid SSL certificate, you'll need
these settings:

---%<-------------------------------------------------------------------------
ssl_ca = </etc/ssl/ca.pem
ssl_verify_client_cert = yes

auth_ssl_require_client_cert = yes
#ssl_username_from_cert = yes
---%<-------------------------------------------------------------------------

The CA file should contain the certificate(s) followed by the matching CRL(s).
Note that the CRLs are required to exist. For a multi-level CA place the
certificates in this order:

 1. Issuing CA cert
 2. Issuing CA CRL
 3. Intermediate CA cert
 4. Intermediate CA CRL
 5. Root CA cert
 6. Root CA CRL

The certificates and the CRLs have to be in PEM format. To convert a DER format
CRL (e.g.http://crl.cacert.org/class3-revoke.crl) into PEM format, use:

---%<-------------------------------------------------------------------------
openssl crl -in class3-revoke.crl -inform DER -outform PEM > class3-revoke.pem
---%<-------------------------------------------------------------------------

With the above settings if a client connects which doesn't present a
certificate signed by one of the CAs in the 'ssl_ca' file, Dovecot won't let
the user log in.

You may also force the username to be taken from the certificate by setting
'ssl_username_from_cert = yes'.

 * The text is looked up from subject DN's specified field using OpenSSL's
   'X509_NAME_get_text_by_NID()' function.
 * By default the 'CommonName' field is used.
 * You can change the field with 'ssl_cert_username_field = name' setting
   (parsed using OpenSSL's 'OBJ_txt2nid()' function). 'x500UniqueIdentifier' is
   a common choice.

You may also want to disable the password checking completely. Doing this
currently circumvents Dovecot's security model so it's not recommended to use
it, but it is possible by making the <passdb> [PasswordDatabase.txt] allow
logins using any password (typically requiring <"nopassword" extra field>
[PasswordDatabase.ExtraFields.txt] to be returned).

Testing
-------

Try out your new setup:

---%<-------------------------------------------------------------------------
openssl s_client -connect mail.sample.com:pop3s
---%<-------------------------------------------------------------------------

You should see something like this:

---%<-------------------------------------------------------------------------
CONNECTED(00000003)
depth=2 /O=Root CA/OU=http://www.cacert.org/CN=CA Cert Signing
Authority/emailAddress=support@cacert.org
verify error:num=19:self signed certificate in certificate chain
verify return:0
---
Certificate chain
 0 s:/CN=mail.example.com
   i:/O=CAcert Inc./OU=http://www.CAcert.org/CN=CAcert Class 3 Root
 1 s:/O=CAcert Inc./OU=http://www.CAcert.org/CN=CAcert Class 3 Root
   i:/O=Root CA/OU=http://www.cacert.org/CN=CA Cert Signing
Authority/emailAddress=support@cacert.org
 2 s:/O=Root CA/OU=http://www.cacert.org/CN=CA Cert Signing
Authority/emailAddress=support@cacert.org
   i:/O=Root CA/OU=http://www.cacert.org/CN=CA Cert Signing
Authority/emailAddress=support@cacert.org
---
Server certificate
-----BEGIN CERTIFICATE-----
MIIE1DCCArygAwIBAgIDAMBPMA0GCSqGSIb3DQEBBAUAMFQxFDASBgNVBAoTC0NB
Y2VydCBJbmMuMR4wHAYDVQQLExVodHRwOi8vd3d3LkNBY2VydC5vcmcxHDAaBgNV
BAMTE0NBY2VydCBDbGFzcyAzIFJvb3QwHhcNMTAxMjIwMTM1NDQ1WhcNMTIxMjE5
MTM1NDQ1WjAmMSQwIgYDjksadnjkasndjksandjksandjksandj5YXJlYS5vcmcw
ggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQC3jOX3FC8wVqnb2r65Sfvk
cYUpJhlbhCfqPdN41c3WS0y1Jwwum1q4oMAJvdRnD5TMff1+fqTFy3lS1sYxIXiD
kBRo478eNqzXHMpBOqbvKjYp/UZgWUNA9ebI1nQtwd7rnjmm/GrtyItjahCsgzDS
qPAie+mXYzuT49ZoG+Glg7/R/jDcLMcJY0d5eJ7kufB1RLhvRitZD4FEbJVehqhY
aevf5bLk1BNFhzRBfLXmv6u/kfvWf2HjGAf0aFhaQyiAldDgnZrvaZOFjkToJk27
p9MguvwGmbciao0DmMjcJhQ0smclFwy8Kj98Tz+nTkfAlU8jJdb1J/tIatJdpSRh
AgMBAAGjgdwwgdkwDAYDVR0TAQH/BAIwADA0BgNVHSUELTArBggrBgEFBQcDAgYI
KwYBBQUHAwEGCWCGSAGG+EIEAQYKKwYBBAGCNwoDAzALBgNVHQ8EBAMCBaAwMwYI
KwYBBQUHAQEEJzAlMCMGCCsGAQUFBzABhadodHRwOi8vb2NzcC5jYWNlcnQub3Jn
LzBRBgNVknsadkjasnjdksandjksandjsnNlY3VyaXR5YXJlYS5vcmegKQYIKwYB
BQUHCAWgHQwbbWFpbC5qb2ludC5zZWN1cml0eWFyZWEub3JnMA0GCSqGSIb3DQEB
BQUAA4ICAQAX8ceObvUZNKYTlNQ/cv0BiA1XweRsVNca1ILACNLdVPR9mvf+aXCh
ODkHaZAmGngj1DfD4fJsTbaydGWSPeVH91Qi9F+Pi6szhsxylI83NKbuXihcenuG
twnte8aIb5FelVHttLQPSKRR62E8YmDWk3KYivuFAuZqDaGnWc5yeneTBpsGter/
4awqsgymBK2YEg1HIWMPaRBvwzCVN/yUyWhFH9Nj11f/xgZE87VXrjLHWT/73i2Z
S4uIZ2KHQUYuxMGldgpXm+QxFM8DGA6z1T1oPCVfW85cezlfr8QVvX6SXZrAUNL0
3D5YPzQuevW+5CrqnGA+F5ff4mBMl8R8Sg0+0LoLqt5PbpGyTt9vS1INZCdfvtIA
/d7Ae7Xp9W8FVRqd7tvNMIy3ZA0/wNMDUczkhC/YtvHfMELpjtMJAGF15OtO7Vik
V+FZnBP1Yd7760dtEmd6bF8vjcXCvDdxwGtcAehAUpIgAWvkHHOt8+H56tkFENAP
/ZpJ+Wr+K3lxkkG+BN1bucxMuAdVyTpFyZfKDHRXIO/5e0hpPOaTO+obD3kifzdh
yy7KmdKvDclHTiPuonJBzEXeM3JQBjcDHbMSyA6+38yBcso27h9VqCQJB2cZmSlW
ArS/9wt2X21KgeuGHlTZ/8z9gXAjQKXhDYECWWd6LkWl98ZDBihslQ==
-----END CERTIFICATE-----
subject=/CN=mail.example.com
issuer=/O=CAcert Inc./OU=http://www.CAcert.org/CN=CAcert Class 3 Root
---
No client certificate CA names sent
---
SSL handshake has read 5497 bytes and written 293 bytes
---
New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA
Server public key is 2048 bit
Secure Renegotiation IS supported
Compression: zlib compression
Expansion: zlib compression
SSL-Session:
    Protocol  : TLSv1
    Cipher    : DHE-RSA-AES256-SHA
    Session-ID:
114A22BE4625B33F6893124ACF640AE0628B48B5039E90B3B9A20ADF7FA691F3
    Session-ID-ctx:
    Master-Key:
B8A55EC91A060575CFB29503FBF7160C2DC8BCBFE02D20A7F704882F72D8D00272D8D002CE5CCC4B94A492F43ED8F
    Key-Arg   : None
    TLS session ticket:
    0000 - 86 c7 46 63 a5 b6 48 74-16 d8 e0 a7 e2 64 e8 89   ..Fc..Ht.....d..
    0010 - 97 90 59 4b 57 f3 e2 b3-e2 d2 88 90 a8 aa b4 44   ..YKW..........D
    0020 - ea 24 08 5e b4 14 7f e1-2a 1a 1c 40 ca 85 e7 41   .$.^....*..@...A
    0030 - 9d 0d a8 4c f7 e3 db 1e-ef da 53 9c fe 43 cc 62   ...L......S..C.b
    0040 - 79 b6 ad ea 9d cf ca b2-37 41 b7 0f ea 7d 59 e8   y.......7A...}Y.
    0050 - 10 01 a0 eb dc c2 63 66-56 54 6a e8 3a 4b 93 49   ......cfVTj.:K.I
    0060 - 77 da e4 4b 21 e8 30 7e-bf 10 91 3a 2c f9 59 80   w..K!.0~...:,.Y.
    0070 - 01 1f 36 0b 92 85 67 55-c8 86 1d 44 b1 6f 0d ae   ..6...gU...D.o..
    0080 - 15 36 b6 49 3a ef 94 9a-ef 6d 27 f0 80 20 43 09   .6.I:....m'.. C.
    0090 - be 70 c5 30 15 3b 93 c6-c1 4c e9 7f 5c 34 98 dd   .p.0.;...L..\4..

    Compression: 1 (zlib compression)
    Start Time: 1292857721
    Timeout   : 300 (sec)
    Verify return code: 19 (self signed certificate in certificate chain)
---
+OK Dovecot ready.
---%<-------------------------------------------------------------------------

(This file was created from the wiki on 2011-11-16 14:09)