# In microcomputer (MC) mode, the vectors are mapped into the on-chip ROM,
# otherwise in microprocessor (MP) mode the vectors are mapped to address 0
# on the external bus. In MC mode, the on-chip ROM contains a bootloader program
# that loads the internal RAM from the serial port or external ROM.
#
# Common configurations:
# 1. MC mode, no external memory (serial boot).
# 2. MC mode, external RAM (serial boot).
# 3. MC mode, external ROM.
# 4. MC mode, external ROM, external RAM.
# 5. MP mode, external ROM.
# 6. MP mode, external ROM, external RAM.
# 7. MP mode, external RAM (dual-port with hosting CPU or external debugger).
#
# Config TEXT DATA/BSS
# 1. INT_RAM INT_RAM (mcmode,onchip)
# 2. EXT_RAM EXT_RAM (mcmode,extram)
# 3. INT_RAM INT_RAM (mcmode,onchip)
# 4. EXT_RAM EXT_RAM (mcmode,extram)
# 5. EXT_ROM INT_RAM (mpmode,onchip,extrom)
# 6. EXT_ROM EXT_RAM (mpmode,extram,extrom)
# 7. EXT_RAM EXT_RAM (mpmode,extram)
#
# In MC mode, TEXT and DATA are copied into RAM by the bootloader.
#
# In MP mode with external ROM, DATA needs to be copied into RAM at boot time.
#
# If there is external RAM it is better to use that and reserve the internal RAM
# for data buffers. However, the address of the external RAM needs to be specified.
#
# This emulation assumes config 7.
case $OUTPUT_ARCH in
tic3x) OUTPUT_ARCHNAME="TMS320C3x" ;;
tic4x) OUTPUT_ARCHNAME="TMS320C4x" ;;
esac
case $ONCHIP in
yes) RAM=RAM;
STACK_SIZE_DEFAULT=128;
HEAP_SIZE_DEFAULT=0;
;;
*) RAM=EXT0;
STACK_SIZE_DEFAULT=0x1000;
HEAP_SIZE_DEFAULT=0x4000;
;;
esac
TEXT_MEMORY=$RAM;
DATA_MEMORY=$RAM;
MEMORY_DEF="
/* C30 memory space. */
MEMORY
{
EXT0 : org = 0x0000000, len = 0x800000 /* External address bus. */
XBUS : org = 0x0800000, len = 0x002000 /* Expansion bus. */
IOBUS : org = 0x0804000, len = 0x002000 /* I/O BUS. */
RAM0 : org = 0x0809800, len = 0x000400 /* Internal RAM block 0. */
RAM1 : org = 0x0809a00, len = 0x000400 /* Internal RAM block 1. */
RAM : org = 0x0809800, len = 0x000800 /* Internal RAM. */
EXT1 : org = 0x080a000, len = 0x7f6000 /* External address bus. */
}
"
test -z "$ENTRY" && ENTRY=_start
cat <<EOF
${RELOCATING+/* Linker script for $OUTPUT_ARCHNAME executable. */}
${RELOCATING-/* Linker script for $OUTPUT_ARCHNAME object file (ld -r). */}
OUTPUT_FORMAT("${OUTPUT_FORMAT}")
OUTPUT_ARCH("${OUTPUT_ARCH}")
${LIB_SEARCH_DIRS}
ENTRY(${ENTRY})
${RELOCATING+ __HEAP_SIZE = DEFINED(__HEAP_SIZE) ? __HEAP_SIZE : ${HEAP_SIZE_DEFAULT};}
${RELOCATING+ __STACK_SIZE = DEFINED(__STACK_SIZE) ? __STACK_SIZE : ${STACK_SIZE_DEFAULT};}
${RELOCATING+${MEMORY_DEF}}
/* In the small memory model the .data and .bss sections must be contiguous
when loaded and fit within the same page. The DP register is loaded
with the page address. */
SECTIONS
{
/* Reset, interrupt, and trap vectors. */
.vectors ${RELOCATING+ 0} : {
*(.vectors)
} ${RELOCATING+ > ${TEXT_MEMORY}}
/* Constants. */
.const : {
*(.const)
} ${RELOCATING+ > ${TEXT_MEMORY}}
/* Program code. */
.text : {
${RELOCATING+ __text = .;}
${RELOCATING+ *(.init)}
*(.text)
${CONSTRUCTING+ ___CTOR_LIST__ = .;}
${CONSTRUCTING+ LONG(___CTOR_END__ - ___CTOR_LIST__ - 2)}
${CONSTRUCTING+ *(.ctors)}
${CONSTRUCTING+ LONG(0);}
${CONSTRUCTING+ ___CTOR_END__ = .;}
${CONSTRUCTING+ ___DTOR_LIST__ = .;}
${CONSTRUCTING+ LONG(___DTOR_END__ - ___DTOR_LIST__ - 2)}
${CONSTRUCTING+ *(.dtors)}
${CONSTRUCTING+ LONG(0)}
${CONSTRUCTING+ ___DTOR_END__ = .;}
${RELOCATING+ *(.fini)}
${RELOCATING+ __etext = .;}
} ${RELOCATING+ > ${TEXT_MEMORY}}
/* Global initialised variables. */
.data :
{
${RELOCATING+ __data = .;}
*(.data)
${RELOCATING+ __edata = .;}
} ${RELOCATING+ > ${DATA_MEMORY}}
/* Global uninitialised variables. */
.bss : {
${RELOCATING+ __bss = .;}
*(.bss)
*(COMMON)
${RELOCATING+ __end = .;}
} ${RELOCATING+ > ${DATA_MEMORY}}
/* Heap. */
.heap :
{
${RELOCATING+ __heap = .;}
${RELOCATING+ . += __HEAP_SIZE};
} ${RELOCATING+ > ${DATA_MEMORY}}
/* Stack (grows upward). */
.stack :
{
${RELOCATING+ __stack = .;}
*(.stack)
${RELOCATING+ . = . + __STACK_SIZE};
} ${RELOCATING+ > ${DATA_MEMORY}}
.stab 0 ${RELOCATING+(NOLOAD)} :
{
[ .stab ]
}
.stabstr 0 ${RELOCATING+(NOLOAD)} :
{
[ .stabstr ]
}
}
EOF