#include "setup.h"
#include "tool_panykey.h"
#include "tool_help.h"
#include "memdebug.h"
#ifdef MSDOS
# define USE_WATT32
#endif
static const char *const helptext[] = {
"Usage: curl [options...] <url>",
"Options: (H) means HTTP/HTTPS only, (F) means FTP only",
" --anyauth Pick \"any\" authentication method (H)",
" -a, --append Append to target file when uploading (F/SFTP)",
" --basic Use HTTP Basic Authentication (H)",
" --cacert FILE CA certificate to verify peer against (SSL)",
" --capath DIR CA directory to verify peer against (SSL)",
" -E, --cert CERT[:PASSWD] Client certificate file and password (SSL)",
" --cert-type TYPE Certificate file type (DER/PEM/ENG) (SSL)",
" --ciphers LIST SSL ciphers to use (SSL)",
" --compressed Request compressed response (using deflate or gzip)",
" -K, --config FILE Specify which config file to read",
" --connect-timeout SECONDS Maximum time allowed for connection",
" -C, --continue-at OFFSET Resumed transfer offset",
" -b, --cookie STRING/FILE String or file to read cookies from (H)",
" -c, --cookie-jar FILE Write cookies to this file after operation (H)",
" --create-dirs Create necessary local directory hierarchy",
" --crlf Convert LF to CRLF in upload",
" --crlfile FILE Get a CRL list in PEM format from the given file",
" -d, --data DATA HTTP POST data (H)",
" --data-ascii DATA HTTP POST ASCII data (H)",
" --data-binary DATA HTTP POST binary data (H)",
" --data-urlencode DATA HTTP POST data url encoded (H)",
" --delegation STRING GSS-API delegation permission",
" --digest Use HTTP Digest Authentication (H)",
" --disable-eprt Inhibit using EPRT or LPRT (F)",
" --disable-epsv Inhibit using EPSV (F)",
" -D, --dump-header FILE Write the headers to this file",
" --egd-file FILE EGD socket path for random data (SSL)",
" --engine ENGINGE Crypto engine (SSL). \"--engine list\" for list",
#ifdef USE_ENVIRONMENT
" --environment Write results to environment variables (RISC OS)",
#endif
" -f, --fail Fail silently (no output at all) on HTTP errors (H)",
" -F, --form CONTENT Specify HTTP multipart POST data (H)",
" --form-string STRING Specify HTTP multipart POST data (H)",
" --ftp-account DATA Account data string (F)",
" --ftp-alternative-to-user COMMAND "
"String to replace \"USER [name]\" (F)",
" --ftp-create-dirs Create the remote dirs if not present (F)",
" --ftp-method [MULTICWD/NOCWD/SINGLECWD] Control CWD usage (F)",
" --ftp-pasv Use PASV/EPSV instead of PORT (F)",
" -P, --ftp-port ADR Use PORT with given address instead of PASV (F)",
" --ftp-skip-pasv-ip Skip the IP address for PASV (F)\n"
" --ftp-pret Send PRET before PASV (for drftpd) (F)",
" --ftp-ssl-ccc Send CCC after authenticating (F)",
" --ftp-ssl-ccc-mode ACTIVE/PASSIVE Set CCC mode (F)",
" --ftp-ssl-control Require SSL/TLS for ftp login, "
"clear for transfer (F)",
" -G, --get Send the -d data with a HTTP GET (H)",
" -g, --globoff Disable URL sequences and ranges using {} and []",
" -H, --header LINE Custom header to pass to server (H)",
" -I, --head Show document info only",
" -h, --help This help text",
" --hostpubmd5 MD5 "
"Hex encoded MD5 string of the host public key. (SSH)",
" -0, --http1.0 Use HTTP 1.0 (H)",
" --ignore-content-length Ignore the HTTP Content-Length header",
" -i, --include Include protocol headers in the output (H/F)",
" -k, --insecure Allow connections to SSL sites without certs (H)",
" --interface INTERFACE Specify network interface/address to use",
" -4, --ipv4 Resolve name to IPv4 address",
" -6, --ipv6 Resolve name to IPv6 address",
" -j, --junk-session-cookies Ignore session cookies read from file (H)",
" --keepalive-time SECONDS Interval between keepalive probes",
" --key KEY Private key file name (SSL/SSH)",
" --key-type TYPE Private key file type (DER/PEM/ENG) (SSL)",
" --krb LEVEL Enable Kerberos with specified security level (F)",
" --libcurl FILE Dump libcurl equivalent code of this command line",
" --limit-rate RATE Limit transfer speed to this rate",
" -l, --list-only List only names of an FTP directory (F)",
" --local-port RANGE Force use of these local port numbers",
" -L, --location Follow redirects (H)",
" --location-trusted like --location and send auth to other hosts (H)",
" -M, --manual Display the full manual",
" --mail-from FROM Mail from this address",
" --mail-rcpt TO Mail to this receiver(s)",
" --max-filesize BYTES Maximum file size to download (H/F)",
" --max-redirs NUM Maximum number of redirects allowed (H)",
" -m, --max-time SECONDS Maximum time allowed for the transfer",
" --negotiate Use HTTP Negotiate Authentication (H)",
" -n, --netrc Must read .netrc for user name and password",
" --netrc-optional Use either .netrc or URL; overrides -n",
" --netrc-file FILE Set up the netrc filename to use",
" -N, --no-buffer Disable buffering of the output stream",
" --no-keepalive Disable keepalive use on the connection",
" --no-sessionid Disable SSL session-ID reusing (SSL)",
" --noproxy List of hosts which do not use proxy",
" --ntlm Use HTTP NTLM authentication (H)",
" -o, --output FILE Write output to <file> instead of stdout",
" --pass PASS Pass phrase for the private key (SSL/SSH)",
" --post301 "
"Do not switch to GET after following a 301 redirect (H)",
" --post302 "
"Do not switch to GET after following a 302 redirect (H)",
" -#, --progress-bar Display transfer progress as a progress bar",
" --proto PROTOCOLS Enable/disable specified protocols",
" --proto-redir PROTOCOLS "
"Enable/disable specified protocols on redirect",
" -x, --proxy [PROTOCOL://]HOST[:PORT] Use proxy on given port",
" --proxy-anyauth Pick \"any\" proxy authentication method (H)",
" --proxy-basic Use Basic authentication on the proxy (H)",
" --proxy-digest Use Digest authentication on the proxy (H)",
" --proxy-negotiate Use Negotiate authentication on the proxy (H)",
" --proxy-ntlm Use NTLM authentication on the proxy (H)",
" -U, --proxy-user USER[:PASSWORD] Proxy user and password",
" --proxy1.0 HOST[:PORT] Use HTTP/1.0 proxy on given port",
" -p, --proxytunnel Operate through a HTTP proxy tunnel (using CONNECT)",
" --pubkey KEY Public key file name (SSH)",
" -Q, --quote CMD Send command(s) to server before transfer (F/SFTP)",
" --random-file FILE File for reading random data from (SSL)",
" -r, --range RANGE Retrieve only the bytes within a range",
" --raw Do HTTP \"raw\", without any transfer decoding (H)",
" -e, --referer Referer URL (H)",
" -J, --remote-header-name Use the header-provided filename (H)",
" -O, --remote-name Write output to a file named as the remote file",
" --remote-name-all Use the remote file name for all URLs",
" -R, --remote-time Set the remote file's time on the local output",
" -X, --request COMMAND Specify request command to use",
" --resolve HOST:PORT:ADDRESS Force resolve of HOST:PORT to ADDRESS",
" --retry NUM "
"Retry request NUM times if transient problems occur",
" --retry-delay SECONDS "
"When retrying, wait this many seconds between each",
" --retry-max-time SECONDS Retry only within this period",
" -S, --show-error "
"Show error. With -s, make curl show errors when they occur",
" -s, --silent Silent mode. Don't output anything",
" --socks4 HOST[:PORT] SOCKS4 proxy on given host + port",
" --socks4a HOST[:PORT] SOCKS4a proxy on given host + port",
" --socks5 HOST[:PORT] SOCKS5 proxy on given host + port",
" --socks5-hostname HOST[:PORT] "
"SOCKS5 proxy, pass host name to proxy",
#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI)
" --socks5-gssapi-service NAME SOCKS5 proxy service name for gssapi",
" --socks5-gssapi-nec Compatibility with NEC SOCKS5 server",
#endif
" -Y, --speed-limit RATE "
"Stop transfers below speed-limit for 'speed-time' secs",
" -y, --speed-time SECONDS "
"Time for trig speed-limit abort. Defaults to 30",
" --ssl Try SSL/TLS (FTP, IMAP, POP3, SMTP)",
" --ssl-reqd Require SSL/TLS (FTP, IMAP, POP3, SMTP)",
" -2, --sslv2 Use SSLv2 (SSL)",
" -3, --sslv3 Use SSLv3 (SSL)",
" --stderr FILE Where to redirect stderr. - means stdout",
" --tcp-nodelay Use the TCP_NODELAY option",
" -t, --telnet-option OPT=VAL Set telnet option",
" --tftp-blksize VALUE Set TFTP BLKSIZE option (must be >512)",
" -z, --time-cond TIME Transfer based on a time condition",
" -1, --tlsv1 Use TLSv1 (SSL)",
" --trace FILE Write a debug trace to the given file",
" --trace-ascii FILE Like --trace but without the hex output",
" --trace-time Add time stamps to trace/verbose output",
" --tr-encoding Request compressed transfer encoding (H)",
" -T, --upload-file FILE Transfer FILE to destination",
" --url URL URL to work with",
" -B, --use-ascii Use ASCII/text transfer",
" -u, --user USER[:PASSWORD] Server user and password",
" --tlsuser USER TLS username",
" --tlspassword STRING TLS password",
" --tlsauthtype STRING TLS authentication type (default SRP)",
" -A, --user-agent STRING User-Agent to send to server (H)",
" -v, --verbose Make the operation more talkative",
" -V, --version Show version number and quit",
#ifdef USE_WATT32
" --wdebug Turn on Watt-32 debugging",
#endif
" -w, --write-out FORMAT What to output after completion",
" --xattr Store metadata in extended file attributes",
" -q If used as the first parameter disables .curlrc",
NULL
};
#ifdef NETWARE
# define PRINT_LINES_PAUSE 23
#endif
#ifdef __SYMBIAN32__
# define PRINT_LINES_PAUSE 16
#endif
void tool_help(void)
{
int i;
for(i = 0; helptext[i]; i++) {
puts(helptext[i]);
#ifdef PRINT_LINES_PAUSE
if(i && ((i % PRINT_LINES_PAUSE) == 0))
tool_pressanykey();
#endif
}
}