.TH LIBTOOL 1 "February 28, 2006" "Apple Computer, Inc." .SH NAME libtool \- create libraries .br ranlib \- add or update the table of contents of archive libraries .SH SYNOPSIS .B libtool .B \-static .BI \-o " output" [ .B \-sacLT ] [ .B \- ] [ .BI -arch_only " arch_type" ] .IR file ... [-filelist listfile[,dirname]] .br .sp .B libtool .B \-dynamic .BI \-o " output" [ .BI \-install_name " name" ] [ .BI \-compatibility_version " number" ] [ .BI \-current_version " number" ] [ .I "link editor flags" ] [ .B \-v ] [ .B \-noall_load ] [ .B \- ] [ .BI -arch_only " arch_type" ] [ .B \-V ] .IR file ... [-filelist listfile[,dirname]] .br .sp .B ranlib [ .B \-sactfqLT ] [ .B \- ] .IR archive ... .SH DESCRIPTION The .I libtool command takes the specified input object files and creates a library for use with the link editor, .IR ld (1). The library's name is specified by .I output (the argument to the .B \-o flag). The input object files may be in any correct format that contains object files (``universal'' files, archives, object files). .I Libtool will not put any non-object input file into the output library (unlike .IR ranlib , which allows this in the archives it operates on). .PP When producing a ``universal'' file from objects of the same CPU type and differing CPU subtypes, .I libtool and .I ranlib create at most one library for each CPU type, rather than a separate library in a universal file for each of the unique pairings of CPU type and CPU subtype. Thus, the resulting CPU subtype for each library is the _ALL CPU subtype for that CPU type. This strategy strongly encourages the implementor of a library to create one library that chooses optimum code to run at run time, rather than at link time. .PP .I Libtool can create either dynamically linked shared libraries, with .B \-dynamic, or statically linked (archive) libraries, with .B \-static. .SH "DYNAMICALLY LINKED SHARED LIBRARIES" .PP Dynamically linked libraries, unlike statically linked libraries, are Mach-O format files and not .IR ar (5) format files. Dynamically linked libraries have two restrictions: No symbol may be defined in more than one object file and no common symbol can be used. To maximize sharing of a dynamically linked shared library the objects should be compiled with the .B \-dynamic flag of .IR cc (1) to produce indirect undefined references and position-independent code. To build a dynamically linked library, .IR libtool , runs the link editor, .IR ld (1), with .B \-dylib once for each architecutre present in the input objects and then .IR lipo (1) to create a universal file if needed. .SH "ARCHIVE (or statically linked) LIBRARIES" .PP .I Libtool with .B \-static is intended to replace .IR ar (5) and .IR ranlib . For backward compatibility, .I ranlib is still available, and it supports universal files. .I Ranlib adds or updates the table of contents to each .I archive so it can be linked by the link editor, .IR ld (1). The table of contents is an archive member at the beginning of the archive that indicates which symbols are defined in which library members. Because .I ranlib rewrites the archive, sufficient temporary file space must be available in the file system that contains the current directory. .I Ranlib takes all correct forms of libraries (universal files containing archives, and simple archives) and updates the table of contents for all archives in the file. .I Ranlib also takes one common incorrect form of archive, an archive whose members are universal object files, adding or updating the table of contents and producing the library in correct form (a universal file containing multiple archives). .PP The archive member name for a table of contents begins with .SM ``\_\^\_.SYMDEF''. Currently, there are two types of table of contents produced by .IB libtool " \-static" and .I ranlib and understood by the link editor, .IR ld (1). These are explained below, under the .B \-s and .B \-a options. .SH OPTIONS .PP The following options pertain to .I libtool only. .TP .B \-static Produce a statically linked (archive) library from the input files. This is the default. .TP .B \-dynamic Produce a dynamically linked shared library from the input files. .TP .BI \-install_name " name" ror a dynamic shared library this specifies the file .I name the library will be installed in for programs that use it. If this is not specified the name specified by the .BI \-o " output" option will be used. .TP .BI \-compatibility_version " number" For a dynamic shared library this specifies the compatibility version number of the library. When a library is used the compatibility version is checked and if the user's version is greater that the library's version, an error message is printed and the using program exits. The format of .I number is .I X[.Y[.Z]] where .I X must be a positive non-zero number less than or equal to 65535, and .I .Y and .I .Z are optional and if present must be non-negative numbers less than or equal to 255. If this is not specified then it has a value of 0 and no checking is done when the library is used. .TP .BI \-current_version " number" For dynamic shared library files this specifies the current version number of the library. The program using the library can obtain the current version of the library programmatically to determine exactly which version of the library it is using. The format of .I number is .I X[.Y[.Z]] where .I X must be a positive non-zero number less than or equal to 65535, and .I .Y and .I .Z are optional and if present must be non-negative numbers less than or equal to 255. If this is not specified then it has a value of 0. .TP .B \-noall_load For dynamic shared library files this specifies the the default behavior of loading all members of archives on the command line is not to be done. This option is used by the GNU compiler driver, .IR cc (1), when used with it's .B -dynamiclib option. This is done to allow selective loading of the GNU's compiler's runtime support library, libcc_dynamic.a . .TP .I "link editor flags" For a dynamic shared library the following .IR ld (1) flags are accepted and passed through: .BI \-l x, .BI \-weak-l x, .B \-search_paths_first .B \-weak_library, .BI \-L dir, .BI \-y sym, .BI \-u sym, .BI \-init sym, .BI \-i definition:indirect, .B \-seg1addr, .B \-segs_read_only_addr, .B \-segs_read_write_addr, .B \-seg_addr_table, .B \-seg_addr_table_filename, .B \-segprot, .B \-segalign, .B \-sectcreate, .B \-sectorder, .B \-sectorder_detail, .B \-sectalign, .B \-undefined, .B \-read_only_relocs, .B \-prebind, .B \-prebind_all_twolevel_modules, .B \-prebind_allow_overlap, .B \-noprebind, .B \-framework, .B \-weak_framework, .B \-umbrella, .B \-allowable_client, .B \-sub_umbrella, .B \-sub_library, .B \-F, .B \-U, .B \-Y, .B \-Sn, .B \-Si, .B \-Sp, .B \-S, .B \-X, .B \-x, .B \-whyload, .B \-all_load. .B \-arch_errors_fatal, .B \-dylib_file, .B \-run_init_lazily, .B \-final_output, .B \-macosx_version_min, .B \-multiply_defined, .B \-multiply_defined_unused, .B \-twolevel_namespace, .B \-twolevel_namespace_hints, .B \-flat_namespace, .B \-nomultidefs, .B \-headerpad, .B \-headerpad_max_install_names, .B \-weak_reference_mismatches, .B \-M, .B \-t, .B \-no_arch_warnings, .B \-single_module, .B \-multi_module, .B \-exported_symbols_list, .B \-unexported_symbols_list, .B \-m, .B \-dead_strip, .B \-no_dead_strip_inits_and_terms, .B \-executable_path, .B \-syslibroot, .B \-no_uuid. See the .IR ld (1) man page for details on these flags. The flag .B \-image_base is a synonym for .B \-seg1addr. .TP .B \-v Verbose mode, which prints the .IR ld (1) commands and .IR lipo (1) commands executed. .TP .B \-V Print the version of libtool. .TP .BI \-filelist " listfile[,dirname]" The .I listfile contains a list of file names and is an alternative way of specifiying file names on the command line. The file names are listed one per line separated only by newlines (spaces and tabs are assumed to be part of the file name). If the optional directory name, .I dirname is specified then it is prepended to each name in the list file. .TP .BI \-arch_only " arch_type" This option causes libtool to build a library only for the specified .I arch_type and ignores all other architectures in the input files. When building a dynamic library, if this is specified with a specific cpusubtype other than the family cpusubtype then libtool it does not use the .IR ld (1) .B \-force_cpusubtype_ALL flag and passes the .B \-arch_only argument to .IR ld (1) as the .B \-arch flag so that the output is tagged with that cpusubtype. .PP The following options pertain to the table of contents for an archive library, and apply to both .IB libtool " \-static" and .I ranlib: .TP .B \-s Produce the preferred type of table of contents, which results in faster link editing when linking with the archive. The order of the table of contents is sorted by symbol name. The library member name of this type of table of contents is .SM ``\_\^\_.SYMDEF SORTED''. This type of table of contents can only be produced when the library does not have multiple members that define the same symbol. This is the default. .TP .B \-a Produce the original type of table of contents, whose order is based on the order of the members in the archive. The library member name of this type of table of contents is .SM ``\_\^\_.SYMDEF''. This type of table of contents must be used when the library has multiple members that define the same symbol. .TP .B \-c Include common symbols as definitions with respect to the table of contents. This is seldom the intended behavior for linking from a library, as it forces the linking of a library member just because it uses an uninitialized global that is undefined at that point in the linking. This option is included only because this was the original behavior of .I ranlib. This option is not the default. .TP .B \-L Use the 4.4bsd archive extended format #1, which allows archive member names to be longer than 16 characters and have spaces in their names. This option is the default. .TP .B \-T Truncate archive member names to 16 characters and don't use the 4.4bsd extended format #1. This option is not the default. .TP .B \-f Warns when the output archive is universal and .IR ar (1) will no longer be able to operate on it. .TP .B \-q Do nothing if a universal file would be created. .PP For compatibility, the following .I ranlib option is accepted (but ignored): .TP .B \-t This option used to request that .I ranlib only ``touch'' the archives instead of modifying them. The option is now ignored, and the table of contents is rebuilt. .PP One other option applies to both .I libtool and .IR ranlib : .TP .B \- Treat all remaining arguments as names of files (or archives) and not as options. .SH "SEE ALSO" ld(1), ar(1), otool(1), make(1), redo_prebinding(1), ar(5) .SH BUGS With the way libraries used to be created, errors were possible if the library was modified with .IR ar (1) and the table of contents was not updated by rerunning .IR ranlib (1). Thus the link editor, .IR ld , warns when the modification date of a library is more recent than the creation date of its table of contents. Unfortunately, this means that you get the warning even if you only copy the library.