# Copyright (C) 2005 Internet Systems Consortium, Inc. ("ISC")
#
# Permission to use, copy, modify, and distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
#
# Shorthand. Note quoting: DLZ_DRIVER_DIR expanded in Makefile, not here.
#
dlzdir='${DLZ_DRIVER_DIR}'
#
# Private autoconf macro to simplify configuring drivers:
#
# DLZ_ADD_DRIVER(DEFINE, DRIVER, INCLUDES, LIBS)
#
# where:
# DEFINE is FOO (to define -DDLZ_FOO)
# DRIVER is dlz_foo_driver (sources without the .c)
# INCLUDES is any necessary include definitions
# LIBS is any necessary library definitions
#
AC_DEFUN(DLZ_ADD_DRIVER, [
CONTRIB_DLZ="$CONTRIB_DLZ -DDLZ_$1"
for i in $2
do
DLZ_DRIVER_SRCS="$DLZ_DRIVER_SRCS $dlzdir/$i.c"
DLZ_DRIVER_OBJS="$DLZ_DRIVER_OBJS $i.$O"
done
if test -n "$3"
then
DLZ_DRIVER_INCLUDES="$DLZ_DRIVER_INCLUDES $3"
fi
if test -n "$4"
then
DLZ_DRIVER_LIBS="$DLZ_DRIVER_LIBS $4"
fi
])
#
# Check for the various DLZ drivers
#
#
# Was --with-dlz-postgres specified?
#
AC_MSG_CHECKING(for Postgres DLZ driver)
AC_ARG_WITH(dlz_postgres,
[ --with-dlz-postgres[=PATH] Build with Postgres DLZ driver [yes|no|path].
(Required to use Postgres with DLZ)],
use_dlz_postgres="$withval", use_dlz_postgres="no")
if test "$use_dlz_postgres" = "yes"
then
# User did not specify a path - guess it
# Ask Postgres to tell us where it is
AC_PATH_PROGS(PG_CONFIG, pg_config, [not found])
if test "$PG_CONFIG" != "not found"
then
use_dlz_postgres=`$PG_CONFIG --includedir`
use_dlz_postgres_lib=`$PG_CONFIG --libdir`
fi
fi
if test "$use_dlz_postgres" = "yes"
then
# User did not specify path and Postgres didn't say - guess it
pgdirs="/usr /usr/local /usr/local/pgsql /usr/pkg"
for d in $pgdirs
do
if test -f $d/include/libpq-fe.h
then
use_dlz_postgres=$d/include
use_dlz_postgres_lib=$d/lib
break
fi
done
fi
if test "$use_dlz_postgres" = "yes"
then
# Still no joy, give up
AC_MSG_RESULT(not found)
AC_MSG_ERROR(
[No pg_config and PostgreSQL was not found in any of $pgdirs; use --with-dlz-postgres=/path or put pg_config in your path])
fi
case "$use_dlz_postgres" in
no)
AC_MSG_RESULT(no)
;;
*)
DLZ_ADD_DRIVER(POSTGRES, dlz_postgres_driver,
[-I$use_dlz_postgres],
[-L$use_dlz_postgres_lib -lpq])
AC_MSG_RESULT(
[using PostgreSQL from $use_dlz_postgres_lib and $use_dlz_postgres])
;;
esac
#
# Was --with-dlz-mysql specified?
#
AC_MSG_CHECKING(for MySQL DLZ driver)
AC_ARG_WITH(dlz_mysql,
[ --with-dlz-mysql[=PATH] Build with MySQL DLZ driver [yes|no|path].
(Required to use MySQL with DLZ)],
use_dlz_mysql="$withval", use_dlz_mysql="no")
mysql_include=""
mysql_lib=""
if test "$use_dlz_mysql" = "yes"
then
# User did not specify a path - guess it
mysqldirs="/usr /usr/local /usr/local/mysql /usr/pkg"
for d in $mysqldirs
do
if test -f $d/include/mysql/mysql.h
then
use_dlz_mysql=$d
mysql_include=$d/include/mysql
if test -d $d/lib/mysql
then
mysql_lib=$d/lib/mysql
else
mysql_lib=$d/lib
fi
break
elif test -f $d/include/mysql.h
then
use_dlz_mysql=$d
mysql_include=$d/include
if test -d $d/lib/mysql
then
mysql_lib=$d/lib/mysql
else
mysql_lib=$d/lib
fi
break
fi
done
elif test "$use_dlz_mysql" != "no"
then
d=$use_dlz_mysql
if test -f $d/include/mysql/mysql.h
then
mysql_include=$d/include/mysql
if test -d $d/lib/mysql
then
mysql_lib=$d/lib/mysql
else
mysql_lib=$d/lib
fi
elif test -f $d/include/mysql.h
then
mysql_include=$d/include
if test -d $d/lib/mysql
then
mysql_lib=$d/lib/mysql
else
mysql_lib=$d/lib
fi
fi
fi
if test "$use_dlz_mysql" = "yes"
then
AC_MSG_RESULT(not found)
AC_MSG_ERROR(
[MySQL was not found in any of $mysqldirs; use --with-dlz-mysql=/path])
fi
case "$use_dlz_mysql" in
no)
AC_MSG_RESULT(no)
;;
*)
DLZ_ADD_DRIVER(MYSQL, dlz_mysql_driver,
[-I${mysql_include}],
[-L${mysql_lib} -lmysqlclient -lz -lcrypt -lm])
AC_MSG_RESULT(
[using mysql from ${mysql_lib} and ${mysql_include}])
;;
esac
#
# Was --with-dlz-bdb specified?
#
AC_MSG_CHECKING(for Berkeley DB DLZ driver)
AC_ARG_WITH(dlz_bdb,
[ --with-dlz-bdb[=PATH] Build with Berkeley DB DLZ driver [yes|no|path].
(Required to use Berkeley DB with DLZ)],
use_dlz_bdb="$withval", use_dlz_bdb="no")
case "$use_dlz_bdb" in
no)
AC_MSG_RESULT(no)
;;
*)
if test "$use_dlz_bdb" = "yes"
then
# User did not specify a path - guess directories
bdbdirs="/usr/local /usr/pkg /usr"
elif test -d "$use_dlz_bdb"
then
# User specified directory and it exists
bdbdirs="$use_dlz_bdb"
else
AC_MSG_RESULT(not found)
AC_MSG_ERROR([path $use_dlz_bdb does not exist])
bdbdirs=""
fi
# Use path we were given or guessed. This is insanely
# complicated because we have to search for a bunch of
# platform-specific variations and have to check
# separately for include and library directories.
# Set both to yes, so we can check them later
dlz_bdb_inc="yes"
dlz_bdb_libs="yes"
for dd in $bdbdirs
do
# Skip nonexistant directories
if test ! -d "$dd"
then
continue
fi
# Check other locations for includes.
# Order is important (sigh).
bdb_incdirs="/ /db48/ /db47/ /db46/ /db45/ /db44/ /db43/ /db42/ /db41/ /db4/ /db/"
for d in $bdb_incdirs
do
if test -f "$dd/include${d}db.h"
then
dlz_bdb_inc="-I$dd/include${d}"
break
fi
done
# Give up on this directory if we couldn't
# find the include subdir
if test "$dlz_bdb_inc" = "yes"
then
continue
fi
# Look for libname other than libdb.so.
# Order is important (sigh).
bdb_libnames="db48 db-4.8 db47 db-4.7 db46 db-4.6 db45 db-4.5 db44 db-4.4 db43 db-4.3 db42 db-4.2 db41 db-4.1 db"
for d in $bdb_libnames
do
if test -f "$dd/lib/lib${d}.so"
then
if test "$dd" != "/usr"
then
dlz_bdb_libs="-L${dd}/lib "
else
dlz_bdb_libs=""
fi
dlz_bdb_libs="${dlz_bdb_libs}-l${d}"
break
fi
done
# If we found both incdir and lib, we're done
if test "$dlz_bdb_libs" != "yes"
then
break
fi
# Otherwise, we're starting over
dlz_bdb_inc="yes"
dlz_bdb_libs="yes"
done
# Done searching, now make sure we got everything.
if test "$dlz_bdb_inc" = "yes"
then
AC_MSG_RESULT(not found)
AC_MSG_ERROR([could not find Berkeley DB include directory])
fi
if test "$dlz_bdb_libs" = "yes"
then
AC_MSG_RESULT(not found)
AC_MSG_ERROR([could not find Berkeley DB library])
fi
DLZ_ADD_DRIVER(BDB, dlz_bdb_driver dlz_bdbhpt_driver,
[$dlz_bdb_inc], [$dlz_bdb_libs])
AC_MSG_RESULT([using Berkeley DB: $dlz_bdb_inc $dlz_bdb_libs])
AC_CONFIG_FILES([contrib/dlz/bin/dlzbdb/Makefile])
;;
esac
#
# Was --with-dlz-filesystem specified?
#
AC_MSG_CHECKING(for file system DLZ driver)
AC_ARG_WITH(dlz_filesystem,
[ --with-dlz-filesystem[=PATH] Build with filesystem DLZ driver [yes|no].
(Required to use file system driver with DLZ)],
use_dlz_filesystem="$withval", use_dlz_filesystem="no")
case "$use_dlz_filesystem" in
no)
AC_MSG_RESULT(no)
;;
*)
DLZ_ADD_DRIVER(FILESYSTEM, dlz_filesystem_driver)
DLZ_SYSTEM_TEST=filesystem
AC_MSG_RESULT(yes)
;;
esac
#
# Was --with-dlz-ldap specified?
#
AC_MSG_CHECKING(for LDAP DLZ driver)
AC_ARG_WITH(dlz_ldap,
[ --with-dlz-ldap[=PATH] Build with LDAP DLZ driver [yes|no|path].
(Required to use LDAP with DLZ)],
use_dlz_ldap="$withval", use_dlz_ldap="no")
if test "$use_dlz_ldap" = "yes"
then
# User did not specify a path - guess it
ldapdirs="/usr /usr/local /usr/pkg"
for d in $ldapdirs
do
if test -f $d/include/ldap.h
then
use_dlz_ldap=$d
break
fi
done
fi
if test "$use_dlz_ldap" = "yes"
then
AC_MSG_RESULT(not found)
AC_MSG_ERROR(
[LDAP headers were not found in any of $ldapdirs; use --with-dlz-ldap=/path])
fi
case "$use_dlz_ldap" in
no)
AC_MSG_RESULT(no)
;;
*)
DLZ_ADD_DRIVER(LDAP, dlz_ldap_driver,
[-I$use_dlz_ldap/include],
[-L$use_dlz_ldap/lib -lldap -llber])
AC_MSG_RESULT(
[using LDAP from $use_dlz_ldap/lib and $use_dlz_ldap/include])
;;
esac
#
# Was --with-dlz-odbc specified?
#
AC_MSG_CHECKING(for ODBC DLZ driver)
AC_ARG_WITH(dlz_odbc,
[ --with-dlz-odbc[=PATH] Build with ODBC DLZ driver [yes|no|path].
(Required to use ODBC with DLZ)],
use_dlz_odbc="$withval", use_dlz_odbc="no")
if test "$use_dlz_odbc" = "yes"
then
# User did not specify a path - guess it
odbcdirs="/usr /usr/local /usr/pkg"
for d in $odbcdirs
do
if test -f $d/include/sql.h -a -f $d/lib/libodbc.a
then
use_dlz_odbc=$d
break
fi
done
fi
case "$use_dlz_odbc" in
no)
AC_MSG_RESULT(no)
;;
yes)
AC_MSG_RESULT(not found)
AC_MSG_ERROR(
[ODBC headers were not found in any of $odbcdirs; use --with-dlz-odbc=/path])
;;
*)
DLZ_ADD_DRIVER(ODBC, dlz_odbc_driver,
[-I$use_dlz_odbc/include],
[-L$use_dlz_odbc/lib -lodbc])
AC_MSG_RESULT([using ODBC from $use_dlz_odbc])
;;
esac
#
# Was --with-dlz-stub specified?
#
AC_MSG_CHECKING(for stub DLZ driver)
AC_ARG_WITH(dlz_stub,
[ --with-dlz-stub[=PATH] Build with stub DLZ driver [yes|no].
(Required to use stub driver with DLZ)],
use_dlz_stub="$withval", use_dlz_stub="no")
case "$use_dlz_stub" in
no)
AC_MSG_RESULT(no)
;;
*)
DLZ_ADD_DRIVER(STUB, dlz_stub_driver)
AC_MSG_RESULT(yes)
;;
esac
# Add any additional DLZ drivers here.
#
# Finally, some generic stuff that applies to all drivers, assuming
# we're compiling contrib DLZ drivers at all.
#
if test -n "$CONTRIB_DLZ"
then
CONTRIB_DLZ="-DCONTRIB_DLZ $CONTRIB_DLZ"
#
# Where to find DLZ driver header files.
#
DLZ_DRIVER_INCLUDES="-I$dlzdir/include $DLZ_DRIVER_INCLUDES"
#
# Initialization and shutdown wrappers, helper functions.
#
DLZ_DRIVER_SRCS="$dlzdir/dlz_drivers.c $dlzdir/sdlz_helper.c $DLZ_DRIVER_SRCS"
DLZ_DRIVER_OBJS="dlz_drivers.$O sdlz_helper.$O $DLZ_DRIVER_OBJS"
fi