bc.info   [plain text]


This is bc.info, produced by makeinfo version 4.0 from bc.texi.


File: bc.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)

* Menu:

* Introduction::
* Basic Elements::
* Expressions::
* Statements::
* Functions::
* Examples::
* Readline and Libedit Options::
* GNU `bc' and Other Implementations::
* Limits::
* Environment Variables::


File: bc.info,  Node: Introduction,  Next: Basic Elements,  Prev: Top,  Up: Top

Introduction
************

* Menu:

* Description::
* Command Line Options::


File: bc.info,  Node: Description,  Next: Command Line Options,  Prev: Introduction,  Up: Introduction

Description
===========

   `bc' [ -hlwsqv ] [long-options] [  FILE ... ]

   `bc' is a language that supports arbitrary precision numbers with
interactive execution of statements.  There are some similarities in
the syntax to the C programming language.  A standard math library is
available by command line option.  If requested, the math library is
defined before processing any files.  `bc' starts by processing code
from all the files listed on the command line in the order listed.
After all files have been processed, `bc' reads from the standard
input.  All code is executed as it is read.  (If a file contains a
command to halt the processor, `bc' will never read from the standard
input.)

   This version of `bc' contains several extensions beyond traditional
`bc' implementations and the POSIX draft standard.  Command line
options can cause these extensions to print a warning or to be
rejected.  This document describes the language accepted by this
processor.  Extensions will be identified as such.

   The author would like to thank Steve Sommars
(<Steve.Sommars@att.com>) for his extensive help in testing the
implementation.  Many great suggestions were given.  This is a much
better product due to his involvement.

   Email bug reports to <bug-bc@gnu.org>.  Be sure to include the word
"bc" somewhere in the "Subject:" field.


File: bc.info,  Node: Command Line Options,  Next: Numbers,  Prev: Description,  Up: Introduction

Command Line Options
====================

   `bc' takes the following options from the command line:
`-h, --help'
     Print the usage and exit.

`-l, --mathlib'
     Define the standard math library.

`-w, --warn'
     Give warnings for extensions to POSIX `bc'.

`-s, --standard'
     Process exactly the POSIX `bc' language.

`-q, --quiet'
     Do not print the normal GNU `bc' welcome.

`-v, --version'
     Print the version number and copyright and quit.


File: bc.info,  Node: Basic Elements,  Next: Expressions,  Prev: Introduction,  Up: Top

Basic Elements
**************

* Menu:

* Numbers::
* Variables::
* Comments::


File: bc.info,  Node: Numbers,  Next: Variables,  Prev: Command Line Options,  Up: Basic Elements

Numbers
=======

   The most basic element in `bc' is the number.  Numbers are arbitrary
precision numbers.  This precision is both in the integer part and the
fractional part.  All numbers are represented internally in decimal and
all computation is done in decimal.  (This version truncates results
from divide and multiply operations.)  There are two attributes of
numbers, the length and the scale.  The length is the total number of
significant decimal digits in a number and the scale is the total number
of decimal digits after the decimal point.  For example, .000001 has a
length of 6 and scale of 6, while 1935.000 has a length of 7 and a scale
of 3.


File: bc.info,  Node: Variables,  Next: Comments,  Prev: Numbers,  Up: Basic Elements

Variables
=========

   Numbers are stored in two types of variables, simple variables and
arrays.  Both simple variables and array variables are named.  Names
begin with a letter followed by any number of letters, digits and
underscores.  All letters must be lower case.  (Full alphanumeric names
are an extension. In POSIX `bc' all names are a single lower case
letter.)  The type of variable is clear by the context because all
array variable names will be followed by brackets ( [ ] ).

   There are four special variables, SCALE, IBASE, OBASE, and LAST.
SCALE defines how some operations use digits after the decimal point.
The default value of SCALE is 0. IBASE and OBASE define the conversion
base for input and output numbers.  The default for both input and
output is base 10.  LAST (an extension) is a variable that has the
value of the last printed number.  These will be discussed in further
detail where appropriate.  All of these variables may have values
assigned to them as well as used in expressions.


File: bc.info,  Node: Comments,  Prev: Variables,  Up: Basic Elements

Comments
========

   Comments in `bc' start with the characters `/*' and end with the
characters `*/'.  Comments may start anywhere and appear as a single
space in the input.  (This causes comments to delimit other input
items.  For example, a comment can not be found in the middle of a
variable name.)  Comments include any newlines (end of line) between
the start and the end of the comment.

   To support the use of scripts for `bc', a single line comment has
been added as an extension.  A single line comment starts at a `#'
character and continues to the next end of the line.  The end of line
character is not part of the comment and is processed normally.


File: bc.info,  Node: Expressions,  Next: Statements,  Prev: Basic Elements,  Up: Top

Expressions
***********

* Menu:

* About Expressions and Special Variables::
* Basic Expressions::
* Relational Expressions::
* Boolean Expressions::
* Precedence::
* Special Expressions::


File: bc.info,  Node: About Expressions and Special Variables,  Next: Basic Expressions,  Prev: Expressions,  Up: Expressions

About Expressions and Special Variables
=======================================

   The numbers are manipulated by expressions and statements.  Since
the language was designed to be interactive, statements and expressions
are executed as soon as possible.  There is no main program.  Instead,
code is executed as it is encountered.  (Functions, discussed in detail
later, are defined when encountered.)

   A simple expression is just a constant. `bc' converts constants into
internal decimal numbers using the current input base, specified by the
variable IBASE. (There is an exception in functions.)  The legal values
of IBASE are 2 through 16.  Assigning a value outside this range to
IBASE will result in a value of 2 or 16.  Input numbers may contain the
characters 0-9 and A-F. (Note: They must be capitals.  Lower case
letters are variable names.)  Single digit numbers always have the
value of the digit regardless of the value of IBASE. (i.e. A = 10.)
For multi-digit numbers, `bc' changes all input digits greater or equal
to IBASE to the value of IBASE-1.  This makes the number `FFF' always
be the largest 3 digit number of the input base.

   Full expressions are similar to many other high level languages.
Since there is only one kind of number, there are no rules for mixing
types.  Instead, there are rules on the scale of expressions.  Every
expression has a scale.  This is derived from the scale of original
numbers, the operation performed and in many cases, the value of the
variable SCALE. Legal values of the variable SCALE are 0 to the maximum
number representable by a C integer.


File: bc.info,  Node: Basic Expressions,  Next: Relational Expressions,  Prev: About Expressions and Special Variables,  Up: Expressions

Basic Expressions
=================

   In the following descriptions of legal expressions, "expr" refers to
a complete expression and "VAR" refers to a simple or an array variable.
A simple variable is just a

   NAME

   and an array variable is specified as

   NAME[EXPR]

   Unless specifically mentioned the scale of the result is the maximum
scale of the expressions involved.

`- expr'
     The result is the negation of the expression.

`++ VAR'
     The variable is incremented by one and the new value is the result
     of the expression.

`-- VAR'
     The variable is decremented by one and the new value is the result
     of the expression.

`VAR ++'
     The result of the expression is the value of the variable and then
     the variable is incremented by one.

`VAR --'
     The result of the expression is the value of the variable and then
     the variable is decremented by one.

`expr + expr'
     The result of the expression is the sum of the two expressions.

`expr - expr'
     The result of the expression is the difference of the two
     expressions.

`expr * expr'
     The result of the expression is the product of the two expressions.

`expr / expr'
     The result of the expression is the quotient of the two
     expressions.  The scale of the result is the value of the variable
     `scale'

`expr % expr'
     The result of the expression is the "remainder" and it is computed
     in the following way.  To compute a%b, first a/b is computed to
     SCALE digits.  That result is used to compute a-(a/b)*b to the
     scale of the maximum of SCALE+scale(b) and scale(a).  If SCALE is
     set to zero and both expressions are integers this expression is
     the integer remainder function.

`expr ^ expr'
     The result of the expression is the value of the first raised to
     the second. The second expression must be an integer.  (If the
     second expression is not an integer, a warning is generated and the
     expression is truncated to get an integer value.)  The scale of the
     result is SCALE if the exponent is negative.  If the exponent is
     positive the scale of the result is the minimum of the scale of the
     first expression times the value of the exponent and the maximum of
     SCALE and the scale of the first expression.  (e.g. scale(a^b) =
     min(scale(a)*b, max(SCALE, scale(a))).)  It should be noted that
     expr^0 will always return the value of 1.

`( expr )'
     This alters the standard precedence to force the evaluation of the
     expression.

`VAR = expr'
     The variable is assigned the value of the expression.

`VAR <op>= expr'
     This is equivalent to "VAR = VAR <op> expr" with the exception
     that the "VAR" part is evaluated only once.  This can make a
     difference if "VAR" is an array.


File: bc.info,  Node: Relational Expressions,  Next: Boolean Expressions,  Prev: Basic Expressions,  Up: Expressions

Relational Expressions
======================

   Relational expressions are a special kind of expression that always
evaluate to 0 or 1, 0 if the relation is false and 1 if the relation is
true.  These may appear in any legal expression.  (POSIX `bc' requires
that relational expressions are used only in `if', `while', and `for'
statements and that only one relational test may be done in them.)  The
relational operators are

`expr1 < expr2'
     The result is 1 if expr1 is strictly less than expr2.

`expr1 <= expr2'
     The result is 1 if expr1 is less than or equal to expr2.

`expr1 > expr2'
     The result is 1 if expr1 is strictly greater than expr2.

`expr1 >= expr2'
     The result is 1 if expr1 is greater than or equal to expr2.

`expr1 == expr2'
     The result is 1 if expr1 is equal to expr2.

`expr1 != expr2'
     The result is 1 if expr1 is not equal to expr2.


File: bc.info,  Node: Boolean Expressions,  Next: Precedence,  Prev: Relational Expressions,  Up: Expressions

Boolean Expressions
===================

   Boolean operations are also legal.  (POSIX `bc' does NOT have
boolean operations). The result of all boolean operations are 0 and 1
(for false and true) as in relational expressions.  The boolean
operators are:

`!expr'
     The result is 1 if expr is 0.

`expr && expr'
     The result is 1 if both expressions are non-zero.

`expr || expr'
     The result is 1 if either expression is non-zero.


File: bc.info,  Node: Precedence,  Next: Special Expressions,  Prev: Boolean Expressions,  Up: Expressions

Precedence
==========

   The expression precedence is as follows: (lowest to highest)

     || operator, left associative
     && operator, left associative
     ! operator, nonassociative
     Relational operators, left associative
     Assignment operator, right associative
     + and - operators, left associative
     *, / and % operators, left associative
     ^ operator, right associative
     unary - operator, nonassociative
     ++ and -- operators, nonassociative

   This precedence was chosen so that POSIX compliant `bc' programs
will run correctly. This will cause the use of the relational and
logical operators to have some unusual behavior when used with
assignment expressions.  Consider the expression:

     a = 3 < 5

   Most C programmers would assume this would assign the result of "3 <
5" (the value 1) to the variable "a".  What this does in `bc' is assign
the value 3 to the variable "a" and then compare 3 to 5.  It is best to
use parentheses when using relational and logical operators with the
assignment operators.


File: bc.info,  Node: Special Expressions,  Prev: Precedence,  Up: Expressions

Special Expressions
===================

   There are a few more special expressions that are provided in `bc'.
These have to do with user-defined functions and standard functions.
They all appear as "NAME`('PARAMETERS`)'".  *Note Functions::, for
user-defined functions.  The standard functions are:

`length ( expression )'
     The value of the length function is the number of significant
     digits in the expression.

`read ( )'
     The `read' function (an extension) will read a number from the
     standard input, regardless of where the function occurs.  Beware,
     this can cause problems with the mixing of data and program in the
     standard input.  The best use for this function is in a previously
     written program that needs input from the user, but never allows
     program code to be input from the user.  The value of the `read'
     function is the number read from the standard input using the
     current value of the variable IBASE for the conversion base.

`scale ( expression )'
     The value of the `scale' function is the number of digits after the
     decimal point in the expression.

`sqrt ( expression )'
     The value of the `sqrt' function is the square root of the
     expression.  If the expression is negative, a run time error is
     generated.


File: bc.info,  Node: Statements,  Next: Functions,  Prev: Expressions,  Up: Top

Statements
**********

* Menu:

* Pseudo Statements::

   Statements (as in most algebraic languages) provide the sequencing of
expression evaluation.  In `bc' statements are executed "as soon as
possible."  Execution happens when a newline in encountered and there
is one or more complete statements.  Due to this immediate execution,
newlines are very important in `bc'. In fact, both a semicolon and a
newline are used as statement separators.  An improperly placed newline
will cause a syntax error.  Because newlines are statement separators,
it is possible to hide a newline by using the backslash character.  The
sequence "\<nl>", where <nl> is the newline appears to `bc' as
whitespace instead of a newline.  A statement list is a series of
statements separated by semicolons and newlines.  The following is a
list of `bc' statements and what they do: (Things enclosed in brackets
( [ ] ) are optional parts of the statement.)

EXPRESSION
     This statement does one of two things.  If the expression starts
     with "<variable> <assignment> ...", it is considered to be an
     assignment statement.  If the expression is not an assignment
     statement, the expression is evaluated and printed to the output.
     After the number is printed, a newline is printed.  For example,
     "a=1" is an assignment statement and "(a=1)" is an expression that
     has an embedded assignment.  All numbers that are printed are
     printed in the base specified by the variable OBASE. The legal
     values for OBASE are 2 through BC_BASE_MAX (*note Environment
     Variables::).  For bases 2 through 16, the usual method of writing
     numbers is used.  For bases greater than 16, `bc' uses a
     multi-character digit method of printing the numbers where each
     higher base digit is printed as a base 10 number.  The
     multi-character digits are separated by spaces.  Each digit
     contains the number of characters required to represent the base
     ten value of "OBASE -1".  Since numbers are of arbitrary
     precision, some numbers may not be printable on a single output
     line.  These long numbers will be split across lines using the "\"
     as the last character on a line.  The maximum number of characters
     printed per line is 70.  Due to the interactive nature of `bc',
     printing a number causes the side effect of assigning the printed
     value to the special variable LAST. This allows the user to
     recover the last value printed without having to retype the
     expression that printed the number.  Assigning to LAST is legal
     and will overwrite the last printed value with the assigned value.
     The newly assigned value will remain until the next number is
     printed or another value is assigned to LAST.  (Some installations
     may allow the use of a single period (.) which is not part of a
     number as a short hand notation for for LAST.)

STRING
     The string is printed to the output.  Strings start with a double
     quote character and contain all characters until the next double
     quote character.  All characters are taken literally, including
     any newline.  No newline character is printed after the string.

`PRINT' LIST
     The `print' statement (an extension) provides another method of
     output.  The LIST is a list of strings and expressions separated by
     commas.  Each string or expression is printed in the order of the
     list.  No terminating newline is printed.  Expressions are
     evaluated and their value is printed and assigned to the variable
     `last'. Strings in the print statement are printed to the output
     and may contain special characters.  Special characters start with
     the backslash character (\e).  The special characters recognized
     by `bc' are "a" (alert or bell), "b" (backspace), "f" (form feed),
     "n" (newline), "r" (carriage return), "q" (double quote), "t"
     (tab), and "\e" (backslash).  Any other character following the
     backslash will be ignored.

{ STATEMENT_LIST }
     This is the compound statement.  It allows multiple statements to
     be grouped together for execution.

`IF' ( EXPRESSION ) STATEMENT1 [`ELSE' STATEMENT2]
     The if statement evaluates the expression and executes statement1
     or statement2 depending on the value of the expression.  If the
     expression is non-zero, statement1 is executed.  If statement2 is
     present and the value of the expression is 0, then statement2 is
     executed.  (The `else' clause is an extension.)

`WHILE' ( EXPRESSION ) STATEMENT
     The while statement will execute the statement while the expression
     is non-zero.  It evaluates the expression before each execution of
     the statement.   Termination of the loop is caused by a zero
     expression value or the execution of a `break' statement.

`FOR' ( [EXPRESSION1] ; [EXPRESSION2] ; [EXPRESSION3] ) STATEMENT
     The `for' statement controls repeated execution of the statement.
     EXPRESSION1 is evaluated before the loop.  EXPRESSION2 is
     evaluated before each execution of the statement.  If it is
     non-zero, the statement is evaluated.  If it is zero, the loop is
     terminated.  After each execution of the statement, EXPRESSION3 is
     evaluated before the reevaluation of expression2.  If EXPRESSION1
     or EXPRESSION3 are missing, nothing is evaluated at the point they
     would be evaluated.  If EXPRESSION2 is missing, it is the same as
     substituting the value 1 for EXPRESSION2.  (The optional
     expressions are an extension. POSIX `bc' requires all three
     expressions.)  The following is equivalent code for the `for'
     statement:

          expression1;
          while (expression2) {
             statement;
             expression3;
          }

`BREAK'
     This statement causes a forced exit of the most recent enclosing
     `while' statement or `for' statement.

`CONTINUE'
     The `continue' statement (an extension)  causes the most recent
     enclosing `for' statement to start the next iteration.

`HALT'
     The `halt' statement (an extension) is an executed statement that
     causes the `bc' processor to quit only when it is executed.  For
     example, "if (0 == 1) halt" will not cause `bc' to terminate
     because the `halt' is not executed.

`RETURN'
     Return the value 0 from a function.  (*Note Functions::.)

`RETURN' ( EXPRESSION )
     Return the value of the expression from a function.  (*Note
     Functions::.)  As an extension, the parenthesis are not required.


File: bc.info,  Node: Pseudo Statements,  Prev: Statements,  Up: Statements

Pseudo Statements
=================

   These statements are not statements in the traditional sense.  They
are not executed statements.  Their function is performed at "compile"
time.

`limits'
     Print the local limits enforced by the local version of `bc'.  This
     is an extension.

`quit'
     When the `quit' statement is read, the `bc' processor is
     terminated, regardless of where the `quit' statement is found.  For
     example, "if (0 == 1) quit" will cause `bc' to terminate.

`warranty'
     Print a longer warranty notice.  This is an extension.


File: bc.info,  Node: Functions,  Next: Examples,  Prev: Statements,  Up: Top

Functions
*********

* Menu:

* Math Library Functions::

   Functions provide a method of defining a computation that can be
executed later.  Functions in `bc' always compute a value and return it
to the caller.  Function definitions are "dynamic" in the sense that a
function is undefined until a definition is encountered in the input.
That definition is then used until another definition function for the
same name is encountered.  The new definition then replaces the older
definition.  A function is defined as follows:

     `define' NAME `(' PARAMETERS `)' `{' NEWLINE
         AUTO_LIST   STATEMENT_LIST `}'

   A function call is just an expression of the form "`name'
`('PARAMETERS`)'".

   Parameters are numbers or arrays (an extension).  In the function
definition, zero or more parameters are defined by listing their names
separated by commas.  Numbers are only call by value parameters.
Arrays are only call by variable.  Arrays are specified in the
parameter definition by the notation "NAME`[ ]'".   In the function
call, actual parameters are full expressions for number parameters.
The same notation is used for passing arrays as for defining array
parameters.  The named array is passed by variable to the function.
Since function definitions are dynamic, parameter numbers and types are
checked when a function is called.  Any mismatch in number or types of
parameters will cause a runtime error.  A runtime error will also occur
for the call to an undefined function.

   The AUTO_LIST is an optional list of variables that are for "local"
use.  The syntax of the auto list (if present) is "`auto' NAME, ... ;".
(The semicolon is optional.)  Each NAME is the name of an auto
variable.  Arrays may be specified by using the same notation as used
in parameters.  These variables have their values pushed onto a stack
at the start of the function.  The variables are then initialized to
zero and used throughout the execution of the function.  At function
exit, these variables are popped so that the original value (at the
time of the function call) of these variables are restored.  The
parameters are really auto variables that are initialized to a value
provided in the function call.  Auto variables are different than
traditional local variables because if function A calls function B, B
may access function A's auto variables by just using the same name,
unless function B has called them auto variables.  Due to the fact that
auto variables and parameters are pushed onto a stack, `bc' supports
recursive functions.

   The function body is a list of `bc' statements.  Again, statements
are separated by semicolons or newlines.  Return statements cause the
termination of a function and the return of a value.  There are two
versions of the return statement.  The first form, "`return'", returns
the value 0 to the calling expression.  The second form, "`return' (
EXPRESSION )", computes the value of the expression and returns that
value to the calling expression.  There is an implied "`return' (0)" at
the end of every function.  This allows a function to terminate and
return 0 without an explicit `return' statement.

   Functions also change the usage of the variable IBASE.  All
constants in the function body will be converted using the value of
IBASE at the time of the function call.  Changes of IBASE will be
ignored during the execution of the function except for the standard
function `read', which will always use the current value of IBASE for
conversion of numbers.

   As an extension, the format of the definition has been slightly
relaxed.  The standard requires the opening brace be on the same line
as the `define' keyword and all other parts must be on following lines.
This version of `bc' will allow any number of newlines before and after
the opening brace of the function.  For example, the following
definitions are legal.

        define d (n) { return (2*n); }
        define d (n)
            { return (2*n); }


File: bc.info,  Node: Math Library Functions,  Prev: Functions,  Up: Functions

Math Library Functions
======================

   If `bc' is invoked with the `-l' option, a math library is preloaded
and the default SCALE is set to 20.  The math functions will calculate
their results to the scale set at the time of their call.  The math
library defines the following functions:

`s (X)'
     The sine of X, X is in radians.

`c (X)'
     The cosine of X, X is in radians.

`a (X)'
     The arctangent of X, arctangent returns radians.

`l (X)'
     The natural logarithm of X.

`E (X)'
     The exponential function of raising E to the value X.

`J (N,X)'
     The bessel function of integer order N of X.


File: bc.info,  Node: Examples,  Next: Readline and Libedit Options,  Prev: Functions,  Up: Top

Examples
********

   In /bin/sh,  the following will assign the value of "pi" to the shell
variable PI.

     pi=$(echo "scale=10; 4*a(1)" | bc -l)

   The following is the definition of the exponential function used in
the math library.  This function is written in POSIX `bc'.


     scale = 20
     
     /* Uses the fact that e^x = (e^(x/2))^2
        When x is small enough, we use the series:
          e^x = 1 + x + x^2/2! + x^3/3! + ...
     */
     
     define e(x) {
       auto  a, d, e, f, i, m, v, z
     
       /* Check the sign of x. */
       if (x<0) {
         m = 1
         x = -x
       }
     
       /* Precondition x. */
       z = scale;
       scale = 4 + z + .44*x;
       while (x > 1) {
         f += 1;
         x /= 2;
       }
     
       /* Initialize the variables. */
       v = 1+x
       a = x
       d = 1
     
       for (i=2; 1; i++) {
         e = (a *= x) / (d *= i)
         if (e == 0) {
           if (f>0) while (f--)  v = v*v;
           scale = z
           if (m) return (1/v);
           return (v/1);
         }
         v += e
       }
     }

   The following is code that uses the extended features of `bc' to
implement a simple program for calculating checkbook balances.  This
program is best kept in a file so that it can be used many times
without having to retype it at every use.


     scale=2
     print "\nCheck book program\n!"
     print "  Remember, deposits are negative transactions.\n"
     print "  Exit by a 0 transaction.\n\n"
     
     print "Initial balance? "; bal = read()
     bal /= 1
     print "\n"
     while (1) {
       "current balance = "; bal
       "transaction? "; trans = read()
       if (trans == 0) break;
       bal -= trans
       bal /= 1
     }
     quit

   The following is the definition of the recursive factorial function.


     define f (x) {
       if (x <= 1) return (1);
       return (f(x-1) * x);
     }


File: bc.info,  Node: Readline and Libedit Options,  Next: GNU `bc' and Other Implementations,  Prev: Examples,  Up: Top

Readline and Libedit Options
****************************

   GNU `bc' can be compiled (via a configure option) to use the GNU
`readline' input editor library or the BSD `libedit' library.  This
allows the user to do more editing of lines before sending them to
`bc'.  It also allows for a history of previous lines typed.  When this
option is selected, `bc' has one more special variable.  This special
variable, HISTORY is the number of lines of history retained.  A value
of -1 means that an unlimited number of history lines are retained.
This is the default value.  Setting the value of HISTORY to a positive
number restricts the number of history lines to the number given.  The
value of 0 disables the history feature.  For more information, read
the user manuals for the GNU `readline', `history' and BSD `libedit'
libraries.  One can not enable both `readline' and `libedit' at the
same time.


File: bc.info,  Node: GNU `bc' and Other Implementations,  Next: Limits,  Prev: Readline and Libedit Options,  Up: Top

GNU `bc' and Other Implementations
**********************************

   This version of `bc' was implemented from the POSIX P1003.2/D11
draft and contains several differences and extensions relative to the
draft and traditional implementations.  It is not implemented in the
traditional way using `dc'.  This version is a single process which
parses and runs a byte code translation of the program.  There is an
"undocumented" option (-c) that causes the program to output the byte
code to the standard output instead of running it.  It was mainly used
for debugging the parser and preparing the math library.

   A major source of differences is extensions, where a feature is
extended to add more functionality and additions, where new features
are added.  The following is the list of differences and extensions.

LANG ENVIRONMENT
     This version does not conform to the POSIX standard in the
     processing of the LANG environment variable and all environment
     variables starting with LC_.

NAMES
     Traditional and POSIX `bc' have single letter names for functions,
     variables and arrays.  They have been extended to be
     multi-character names that start with a letter and may contain
     letters, numbers and the underscore character.

STRINGS
     Strings are not allowed to contain NUL characters.  POSIX says all
     characters must be included in strings.

LAST
     POSIX `bc' does not have a \fBlast variable.  Some implementations
     of `bc' use the period (.) in a similar way.

COMPARISONS
     POSIX `bc' allows comparisons only in the `if' statement, the
     `while' statement, and the second expression of the `for'
     statement.  Also, only one relational operation is allowed in each
     of those statements.

IF STATEMENT, ELSE CLAUSE
     POSIX `bc' does not have an `else' clause.

FOR STATEMENT
     POSIX `bc' requires all expressions to be present in the `for'
     statement.

&&, ||, !
     POSIX `bc' does not have the logical operators.

READ FUNCTION
     POSIX `bc' does not have a `read' function.

PRINT STATEMENT
     POSIX `bc' does not have a `print' statement.

CONTINUE STATEMENT
     POSIX `bc' does not have a continue statement.

ARRAY PARAMETERS
     POSIX `bc' does not (currently) support array parameters in full.
     The POSIX grammar allows for arrays in function definitions, but
     does not provide a method to specify an array as an actual
     parameter.  (This is most likely an oversight in the grammar.)
     Traditional implementations of `bc' have only call by value array
     parameters.

FUNCTION FORMAT
     POSIX `bc' requires the opening brace on the same line as the
     `define' key word and the `auto' statement on the next line.

=+, =-, =*, =/, =%, =^
     POSIX `bc' does not require these "old style" assignment operators
     to be defined.  This version may allow these "old style"
     assignments.  Use the `limits' statement to see if the installed
     version supports them.  If it does support the "old style"
     assignment operators, the statement "a =- 1" will decrement `a' by
     1 instead of setting `a' to the value -1.

SPACES IN NUMBERS
     Other implementations of `bc' allow spaces in numbers.  For
     example, "x=1 3" would assign the value 13 to the variable x.  The
     same statement would cause a syntax error in this version of `bc'.

ERRORS AND EXECUTION
     This implementation varies from other implementations in terms of
     what code will be executed when syntax and other errors are found
     in the program.  If a syntax error is found in a function
     definition, error recovery tries to find the beginning of a
     statement and continue to parse the function.  Once a syntax error
     is found in the function, the function will not be callable and
     becomes undefined.  Syntax errors in the interactive execution
     code will invalidate the current execution block.  The execution
     block is terminated by an end of line that appears after a
     complete sequence of statements.  For example,

          a = 1
          b = 2

     has two execution blocks and

          { a = 1
            b = 2 }

     has one execution block.  Any runtime error will terminate the
     execution of the current execution block.  A runtime warning will
     not terminate the current execution block.

INTERRUPTS
     During an interactive session, the SIGINT signal (usually
     generated by the control-C character from the terminal) will cause
     execution of the current execution block to be interrupted.  It
     will display a "runtime" error indicating which function was
     interrupted.  After all runtime structures have been cleaned up, a
     message will be printed to notify the user that `bc' is ready for
     more input.  All previously defined functions remain defined and
     the value of all non-auto variables are the value at the point of
     interruption.  All auto variables and function parameters are
     removed during the clean up process.  During a non-interactive
     session, the SIGINT signal will terminate the entire run of `bc'.


File: bc.info,  Node: Limits,  Next: Environment Variables,  Prev: GNU `bc' and Other Implementations,  Up: Top

Limits
******

   The following are the limits currently in place for this `bc'
processor.  Some of them may have been changed by an installation.  Use
the `limits' statement to see the actual values.

`BC_BASE_MAX'
     The maximum output base is currently set at 999.  The maximum
     input base is 16.

`BC_DIM_MAX'
     This is currently an arbitrary limit of 65535 as distributed.  Your
     installation may be different.

`BC_SCALE_MAX'
     The number of digits after the decimal point is limited to INT_MAX
     digits.  Also, the number of digits before the decimal point is
     limited to INT_MAX digits.

`BC_STRING_MAX'
     The limit on the number of characters in a string is INT_MAX
     characters.

`exponent'
     The value of the exponent in the raise operation (^) is limited to
     LONG_MAX.

`multiply'
     The multiply routine may yield incorrect results if a number has
     more than LONG_MAX / 90 total digits.  For 32 bit longs, this
     number is 23,860,929 digits.

`variable names'
     The current limit on the number of unique names is 32767 for each
     of simple variables, arrays and functions.


File: bc.info,  Node: Environment Variables,  Prev: Limits,  Up: Top

Environment Variables
*********************

   The following environment variables are processed by `bc':

`POSIXLY_CORRECT'
     This is the same as the -s option (*note Command Line Options::).

`BC_ENV_ARGS'
     This is another mechanism to get arguments to `bc'.  The format is
     the same as the command line arguments.  These arguments are
     processed first, so any files listed in the environent arguments
     are processed before any command line argument files.  This allows
     the user to set up "standard" options and files to be processed at
     every invocation of `bc'.  The files in the environment variables
     would typically contain function definitions for functions the user
     wants defined every time `bc' is run.

`BC_LINE_LENGTH'
     This should be an integer specifing the number of characters in an
     output line for numbers. This includes the backslash and newline
     characters for long numbers.



Tag Table:
Node: Top65
Node: Introduction354
Node: Description515
Node: Command Line Options1969
Node: Basic Elements2533
Node: Numbers2704
Node: Variables3467
Node: Comments4576
Node: Expressions5317
Node: About Expressions and Special Variables5597
Node: Basic Expressions7333
Node: Relational Expressions10274
Node: Boolean Expressions11279
Node: Precedence11834
Node: Special Expressions12994
Node: Statements14376
Node: Pseudo Statements21001
Node: Functions21649
Node: Math Library Functions25703
Node: Examples26413
Node: Readline and Libedit Options28431
Node: GNU `bc' and Other Implementations29458
Node: Limits34700
Node: Environment Variables35953

End Tag Table