.\"- .\" Copyright (c) 1980, 1990, 1991, 1993, 1994 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)ps.1 8.3 (Berkeley) 4/18/94 .\" $FreeBSD: src/bin/ps/ps.1,v 1.86 2005/04/29 11:10:27 maxim Exp $ .\" .Dd March 20, 2005 .Dt PS 1 .Os .Sh NAME .Nm ps .Nd process status .Sh SYNOPSIS .Nm .Op Fl AaCcEefhjlMmrSTvwXx .Op Fl O Ar fmt | Fl o Ar fmt .Op Fl G Ar gid Ns Op , Ns Ar gid Ns Ar ... .Op Fl g Ar grp Ns Op , Ns Ar grp Ns Ar ... .Op Fl u Ar uid Ns Op , Ns Ar uid Ns Ar ... .Op Fl p Ar pid Ns Op , Ns Ar pid Ns Ar ... .Op Fl t Ar tty Ns Op , Ns Ar tty Ns Ar ... .Op Fl U Ar user Ns Op , Ns Ar user Ns Ar ... .Nm .Op Fl L .Sh DESCRIPTION The .Nm utility displays a header line, followed by lines containing information about all of your processes that have controlling terminals. .Pp A different set of processes can be selected for display by using any combination of the .Fl a , G , g , p , T , t , U , and .Fl u options. If more than one of these options are given, then .Nm will select all processes which are matched by at least one of the given options. .Pp For the processes which have been selected for display, .Nm will usually display one line per process. The .Fl M option may result in multiple output lines (one line per thread) for some processes. By default all of these output lines are sorted first by controlling terminal, then by process ID. The .Fl m , r , and .Fl v options will change the sort order. If more than one sorting option was given, then the selected processes will be sorted by the last sorting option which was specified. .Pp For the processes which have been selected for display, the information to display is selected based on a set of keywords (see the .Fl L , O , and .Fl o options). The default output format includes, for each process, the process' ID, controlling terminal, CPU time (including both user and system time), state, and associated command. .Pp The options are as follows: .Bl -tag -width indent .It Fl A Display information about other users' processes, including those without controlling terminals. .It Fl a Display information about other users' processes as well as your own. This will skip any processes which do not have a controlling terminal, unless the .Fl x option is also specified. .It Fl C Change the way the CPU percentage is calculated by using a .Dq raw CPU calculation that ignores .Dq resident time (this normally has no effect). .It Fl c Change the .Dq command column output to just contain the executable name, rather than the full command line. .It Fl d Like .Fl A , but excludes session leaders. .It Fl E Display the environment as well. This does not reflect changes in the environment after process launch. .It Fl e Identical to .Fl A . .It Fl f Display the uid, pid, parent pid, recent CPU usage, process start time, controlling tty, elapsed CPU usage, and the associated command. If the .Fl u option is also used, display the user name rather then the numeric uid. When .Fl o or .Fl O is used to add to the display following .Fl f , the command field is not truncated as severely as it is in other formats. .It Fl G Display information about processes which are running with the specified real group IDs. .It Fl g Display information about processes with the specified process group leaders. .It Fl h Repeat the information header as often as necessary to guarantee one header per page of information. .It Fl j Print information associated with the following keywords: .Cm user , pid , ppid , pgid , sess , jobc , state , tt , time , and .Cm command . .It Fl L List the set of keywords available for the .Fl O and .Fl o options. .It Fl l Display information associated with the following keywords: .Cm uid , pid , ppid , flags , cpu , pri , nice , vsz=SZ , rss , .Cm wchan , state=S , paddr=ADDR , tty , time , and .Cm command=CMD . .It Fl M Print the threads corresponding to each task. .It Fl m Sort by memory usage, instead of the combination of controlling terminal and process ID. .It Fl O Add the information associated with the space or comma separated list of keywords specified, after the process ID, in the default information display. Keywords may be appended with an equals .Pq Ql = sign and a string. This causes the printed header to use the specified string instead of the standard header. .It Fl o Display information associated with the space or comma separated list of keywords specified. Multiple keywords may also be given in the form of more than one .Fl o option. Keywords may be appended with an equals .Pq Ql = sign and a string. This causes the printed header to use the specified string instead of the standard header. If all keywords have empty header texts, no header line is written. .It Fl p Display information about processes which match the specified process IDs. .It Fl r Sort by current CPU usage, instead of the combination of controlling terminal and process ID. .It Fl S Change the way the process time is calculated by summing all exited children to their parent process. .It Fl T Display information about processes attached to the device associated with the standard input. .It Fl t Display information about processes attached to the specified terminal devices. .It Fl U Display the processes belonging to the specified real user IDs. .It Fl u Display the processes belonging to the specified usernames. .It Fl v Display information associated with the following keywords: .Cm pid , state , time , sl , re , pagein , vsz , rss , lim , tsiz , .Cm %cpu , %mem , and .Cm command . The .Fl v option implies the .Fl m option. .It Fl w Use 132 columns to display information, instead of the default which is your window size. If the .Fl w option is specified more than once, .Nm will use as many columns as necessary without regard for your window size. When output is not to a terminal, an unlimited number of columns are always used. .It Fl X When displaying processes matched by other options, skip any processes which do not have a controlling terminal. .It Fl x When displaying processes matched by other options, include processes which do not have a controlling terminal. This is the opposite of the .Fl X option. If both .Fl X and .Fl x are specified in the same command, then .Nm will use the one which was specified last. .El .Pp A complete list of the available keywords is given below. Some of these keywords are further specified as follows: .Bl -tag -width lockname .It Cm %cpu The CPU utilization of the process; this is a decaying average over up to a minute of previous (real) time. Because the time base over which this is computed varies (some processes may be very young), it is possible for the sum of all .Cm %cpu fields to exceed 100%. .It Cm %mem The percentage of real memory used by this process. .It Cm flags The flags associated with the process as in the include file .In sys/proc.h : .Bl -column P_STOPPED_SINGLE 0x4000000 .It Dv "P_ADVLOCK" Ta No "0x00001 Process may hold a POSIX advisory lock" .It Dv "P_CONTROLT" Ta No "0x00002 Has a controlling terminal" .It Dv "P_LP64" Ta No "0x00004 Process is LP64" .It Dv "P_NOCLDSTOP" Ta No "0x00008 No SIGCHLD when children stop" .It Dv "P_PPWAIT" Ta No "0x00010 Parent is waiting for child to exec/exit" .It Dv "P_PROFIL" Ta No "0x00020 Has started profiling" .It Dv "P_SELECT" Ta No "0x00040 Selecting; wakeup/waiting danger" .It Dv "P_CONTINUED" Ta No "0x00080 Process was stopped and continued" .It Dv "P_SUGID" Ta No "0x00100 Had set id privileges since last exec" .It Dv "P_SYSTEM" Ta No "0x00200 System proc: no sigs, stats or swapping" .It Dv "P_TIMEOUT" Ta No "0x00400 Timing out during sleep" .It Dv "P_TRACED" Ta No "0x00800 Debugged process being traced" .It Dv "P_WAITED" Ta No "0x01000 Debugging process has waited for child" .It Dv "P_WEXIT" Ta No "0x02000 Working on exiting" .It Dv "P_EXEC" Ta No "0x04000 Process called exec" .It Dv "P_OWEUPC" Ta No "0x08000 Owe process an addupc() call at next ast" .It Dv "P_WAITING" Ta No "0x40000 Process has a wait() in progress" .It Dv "P_KDEBUG" Ta No "0x80000 Kdebug tracing on for this process" .El .It Cm lim The soft limit on memory used, specified via a call to .Xr setrlimit 2 . .It Cm lstart The exact time the command started, using the .Ql %c format described in .Xr strftime 3 . .It Cm nice The process scheduling increment (see .Xr setpriority 2 ) . .It Cm rss the real memory (resident set) size of the process (in 1024 byte units). .It Cm start The time the command started. If the command started less than 24 hours ago, the start time is displayed using the .Dq Li %l:ps.1p format described in .Xr strftime 3 . If the command started less than 7 days ago, the start time is displayed using the .Dq Li %a6.15p format. Otherwise, the start time is displayed using the .Dq Li %e%b%y format. .It Cm state The state is given by a sequence of characters, for example, .Dq Li RWNA . The first character indicates the run state of the process: .Pp .Bl -tag -width indent -compact .It Li I Marks a process that is idle (sleeping for longer than about 20 seconds). .It Li R Marks a runnable process. .It Li S Marks a process that is sleeping for less than about 20 seconds. .It Li T Marks a stopped process. .It Li U Marks a process in uninterruptible wait. .It Li Z Marks a dead process (a .Dq zombie ) . .El .Pp Additional characters after these, if any, indicate additional state information: .Pp .Bl -tag -width indent -compact .It Li + The process is in the foreground process group of its control terminal. .It Li < The process has raised CPU scheduling priority. .It Li > The process has specified a soft limit on memory requirements and is currently exceeding that limit; such a process is (necessarily) not swapped. .It Li A the process has asked for random page replacement .Pf ( Dv VA_ANOM , from .Xr vadvise 2 , for example, .Xr lisp 1 in a garbage collect). .It Li E The process is trying to exit. .It Li L The process has pages locked in core (for example, for raw .Tn I/O ) . .It Li N The process has reduced CPU scheduling priority (see .Xr setpriority 2 ) . .It Li S The process has asked for .Tn FIFO page replacement .Pf ( Dv VA_SEQL , from .Xr vadvise 2 , for example, a large image processing program using virtual memory to sequentially address voluminous data). .It Li s The process is a session leader. .It Li V The process is suspended during a .Xr vfork 2 . .It Li W The process is swapped out. .It Li X The process is being traced or debugged. .El .It Cm tt An abbreviation for the pathname of the controlling terminal, if any. The abbreviation consists of the three letters following .Pa /dev/tty , or, for the console, .Dq Li con . This is followed by a .Ql - if the process can no longer reach that controlling terminal (i.e., it has been revoked). .It Cm wchan The event (an address in the system) on which a process waits. When printed numerically, the initial part of the address is trimmed off and the result is printed in hex, for example, 0x80324000 prints as 324000. .El .Pp When printing using the command keyword, a process that has exited and has a parent that has not yet waited for the process (in other words, a zombie) is listed as .Dq Li <defunct> , and a process which is blocked while trying to exit is listed as .Dq Li <exiting> . If the arguments cannot be located (usually because it has not been set, as is the case of system processes and/or kernel threads) the command name is printed within square brackets. The process can change the arguments shown with .Xr setproctitle 3 . Otherwise, .Nm makes an educated guess as to the file name and arguments given when the process was created by examining memory or the swap area. The method is inherently somewhat unreliable and in any event a process is entitled to destroy this information. The ucomm (accounting) keyword can, however, be depended on. If the arguments are unavailable or do not agree with the ucomm keyword, the value for the ucomm keyword is appended to the arguments in parentheses. .Sh KEYWORDS The following is a complete list of the available keywords and their meanings. Several of them have aliases (keywords which are synonyms). .Pp .Bl -tag -width ".Cm sigignore" -compact .It Cm %cpu percentage CPU usage (alias .Cm pcpu ) .It Cm %mem percentage memory usage (alias .Cm pmem ) .It Cm acflag accounting flag (alias .Cm acflg ) .It Cm args command and arguments .It Cm comm command .It Cm command command and arguments .It Cm cpu short-term CPU usage factor (for scheduling) .It Cm etime elapsed running time .It Cm flags the process flags, in hexadecimal (alias .Cm f ) .It Cm gid processes group id (alias .Cm group ) .It Cm inblk total blocks read (alias .Cm inblock ) .It Cm jobc job control count .It Cm ktrace tracing flags .It Cm ktracep tracing vnode .It Cm lim memoryuse limit .It Cm logname login name of user who started the session .It Cm lstart time started .It Cm majflt total page faults .It Cm minflt total page reclaims .It Cm msgrcv total messages received (reads from pipes/sockets) .It Cm msgsnd total messages sent (writes on pipes/sockets) .It Cm nice nice value (alias .Cm ni ) .It Cm nivcsw total involuntary context switches .It Cm nsigs total signals taken (alias .Cm nsignals ) .It Cm nswap total swaps in/out .It Cm nvcsw total voluntary context switches .It Cm nwchan wait channel (as an address) .It Cm oublk total blocks written (alias .Cm oublock ) .It Cm p_ru resource usage (valid only for zombie) .It Cm paddr swap address .It Cm pagein pageins (same as majflt) .It Cm pgid process group number .It Cm pid process ID .It Cm ppid parent process ID .It Cm pri scheduling priority .It Cm re core residency time (in seconds; 127 = infinity) .It Cm rgid real group ID .It Cm rss resident set size .It Cm ruid real user ID .It Cm ruser user name (from ruid) .It Cm sess session ID .It Cm sig pending signals (alias .Cm pending ) .It Cm sigmask blocked signals (alias .Cm blocked ) .It Cm sl sleep time (in seconds; 127 = infinity) .It Cm start time started .It Cm state symbolic process state (alias .Cm stat ) .It Cm svgid saved gid from a setgid executable .It Cm svuid saved UID from a setuid executable .It Cm tdev control terminal device number .It Cm time accumulated CPU time, user + system (alias .Cm cputime ) .It Cm tpgid control terminal process group ID .\".It Cm trss .\"text resident set size (in Kbytes) .It Cm tsess control terminal session ID .It Cm tsiz text size (in Kbytes) .It Cm tt control terminal name (two letter abbreviation) .It Cm tty full name of control terminal .It Cm ucomm name to be used for accounting .It Cm uid effective user ID .It Cm upr scheduling priority on return from system call (alias .Cm usrpri ) .It Cm user user name (from UID) .It Cm utime user CPU time (alias .Cm putime ) .It Cm vsz virtual size in Kbytes (alias .Cm vsize ) .It Cm wchan wait channel (as a symbolic name) .It Cm wq total number of workqueue threads .It Cm wqb number of blocked workqueue threads .It Cm wqr number of running workqueue threads .It Cm wql workqueue limit status (C = constrained thread limit, T = total thread limit) .It Cm xstat exit or stop status (valid only for stopped or zombie process) .El .Sh ENVIRONMENT The following environment variables affect the execution of .Nm : .Bl -tag -width ".Ev COLUMNS" .It Ev COLUMNS If set, specifies the user's preferred output width in column positions. By default, .Nm attempts to automatically determine the terminal width. .El .Sh FILES .Bl -tag -width ".Pa /boot/kernel/kernel" -compact .It Pa /dev special files and device names .It Pa /var/run/dev.db /dev name database .It Pa /var/db/kvm_kernel.db system namelist database .El .Sh LEGACY DESCRIPTION In legacy mode, .Nm functions as described above, with the following differences: .Bl -tag -width indent .It Fl e Display the environment as well. Same as .Fl E . .It Fl g Ignored for compatibility. Takes no argument. .It Fl l Display information associated with the following keywords: .Cm uid , pid , ppid , cpu , pri , nice , vsz , rss , wchan , state , .Cm tt, time , and .Cm command . .It Fl u Display information associated with the following keywords: .Cm user , pid , %cpu , %mem , vsz , rss , tt , state , start , time , and .Cm command . The .Fl u option implies the .Fl r option. .El .Pp The biggest change is in the interpretation of the .Fl u option, which now displays processes belonging to the specified username(s). Thus, "ps -aux" will fail (unless you want to know about user "x"). As a convenience, however, "ps aux" still works as it did in Tiger. .Pp For more information about legacy mode, see .Xr compat 5 . .Sh SEE ALSO .Xr kill 1 , .Xr w 1 , .Xr kvm 3 , .Xr strftime 3 , .Xr sysctl 8 .Sh STANDARDS The .Nm utility supports the .St -susv3 standard. .Sh HISTORY The .Nm command appeared in .At v4 . .Sh BUGS Since .Nm cannot run faster than the system and is run as any other scheduled process, the information it displays can never be exact. .Pp The .Nm utility does not correctly display argument lists containing multibyte characters.