dnl Copyright 2005 Red Hat, Inc.
dnl
dnl Permission to use, copy, modify, distribute, and sell this software and its
dnl documentation for any purpose is hereby granted without fee, provided that
dnl the above copyright notice appear in all copies and that both that
dnl copyright notice and this permission notice appear in supporting
dnl documentation, and that the name of Red Hat not be used in
dnl advertising or publicity pertaining to distribution of the software without
dnl specific, written prior permission. Red Hat makes no
dnl representations about the suitability of this software for any purpose. It
dnl is provided "as is" without express or implied warranty.
dnl
dnl RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
dnl INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
dnl EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
dnl CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
dnl DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
dnl TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
dnl PERFORMANCE OF THIS SOFTWARE.
dnl
dnl Process this file with autoconf to create configure.
AC_PREREQ([2.57])
# Pixman versioning scheme
#
# - The version in git has an odd MICRO version number
#
# - Released versions both development and stable have an even MICRO
# version number
#
# - Released development versions have an odd MINOR number
#
# - Released stable versions have an event MINOR number
#
# - Versions that break ABI must have a new MAJOR number
#
# - If you break the ABI, then at least this must be done:
#
# - increment MAJOR
#
# - In the first development release where you break ABI, find
# all instances of "pixman-n" and change them to pixman-(n+1)
#
# This needs to be done at least in
# configure.ac
# all Makefile.am's
# pixman-n.pc.in
#
# This ensures that binary incompatible versions can be installed
# in parallel. See http://www106.pair.com/rhp/parallel.html for
# more information
#
m4_define([pixman_major], 0)
m4_define([pixman_minor], 11)
m4_define([pixman_micro], 8)
m4_define([pixman_version],[pixman_major.pixman_minor.pixman_micro])
AC_INIT(pixman, pixman_version, "sandmann@daimi.au.dk", pixman)
AM_INIT_AUTOMAKE([dist-bzip2])
AM_CONFIG_HEADER(config.h)
AC_PROG_CC
AC_PROG_LIBTOOL
AC_CHECK_FUNCS([getisax])
AC_C_BIGENDIAN
#
# We ignore pixman_major in the version here because the major version should
# always be encoded in the actual library name. Ie., the soname is:
#
# pixman-$(pixman_major).0.minor.micro
#
m4_define([lt_current], [pixman_minor])
m4_define([lt_revision], [pixman_micro])
m4_define([lt_age], [pixman_minor])
LT_VERSION_INFO="lt_current:lt_revision:lt_age"
PIXMAN_VERSION_MAJOR=pixman_major()
AC_SUBST(PIXMAN_VERSION_MAJOR)
PIXMAN_VERSION_MINOR=pixman_minor()
AC_SUBST(PIXMAN_VERSION_MINOR)
PIXMAN_VERSION_MICRO=pixman_micro()
AC_SUBST(PIXMAN_VERSION_MICRO)
AC_SUBST(LT_VERSION_INFO)
# Check for dependencies
#PKG_CHECK_MODULES(DEP, x11)
changequote(,)dnl
if test "x$GCC" = "xyes"; then
case " $CFLAGS " in
*[\ \ ]-Wall[\ \ ]*) ;;
*) CFLAGS="$CFLAGS -Wall" ;;
esac fi changequote([,])dnl
AC_PATH_PROG(PERL, perl, no)
if test "x$PERL" = xno; then
AC_MSG_ERROR([Perl is required to build pixman.])
fi
AC_SUBST(PERL)
dnl =========================================================================
dnl -fvisibility stuff
have_gcc4=no
AC_MSG_CHECKING(for -fvisibility)
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ >= 4)
#else
#error Need GCC 4.0 for visibility
#endif
int main () { return 0; }
], have_gcc4=yes)
if test "x$have_gcc4" = "xyes"; then
CFLAGS="$CFLAGS -fvisibility=hidden"
fi
AC_MSG_RESULT($have_gcc4)
dnl ===========================================================================
dnl Check for MMX
MMX_CFLAGS="-mmmx -Winline"
if test "x$GCC" = "xyes"; then
MMX_CFLAGS="$MMX_CFLAGS --param inline-unit-growth=10000 --param large-function-growth=10000"
fi
have_mmx_intrinsics=no
AC_MSG_CHECKING(whether to use MMX intrinsics)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $MMX_CFLAGS"
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4))
#error "Need GCC >= 3.4 for MMX intrinsics"
#endif
#include <mmintrin.h>
int main () {
__m64 v = _mm_cvtsi32_si64 (1);
return _mm_cvtsi64_si32 (v);
}], have_mmx_intrinsics=yes)
CFLAGS=$xserver_save_CFLAGS
AC_ARG_ENABLE(mmx,
[AC_HELP_STRING([--disable-mmx],
[disable MMX fast paths])],
[enable_mmx=$enableval], [enable_mmx=auto])
if test $enable_mmx = no ; then
have_mmx_intrinsics=disabled
fi
if test $have_mmx_intrinsics = yes ; then
AC_DEFINE(USE_MMX, 1, [use MMX compiler intrinsics])
else
MMX_CFLAGS=
fi
AC_MSG_RESULT($have_mmx_intrinsics)
if test $enable_mmx = yes && test $have_mmx_intrinsics = no ; then
AC_MSG_ERROR([MMX intrinsics not detected])
fi
AM_CONDITIONAL(USE_MMX, test $have_mmx_intrinsics = yes)
dnl =======================================================
dnl GCC 4.2 when compiling with -msse will generate SSE instructions
dnl on its own. This means anything compiled with -mss can only be
dnl run after a runtime check for SSE. Unfortunately, since we still
dnl need to support MMX-but-not-SSE (such as the OLPC), this means we
dnl can only use SSE when compiling for x86-64 (where SSE is always
dnl supported).
have_sse_intrinsics=no
AC_MSG_CHECKING(whether to use SSE intrinsics)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -msse $MMX_CFLAGS"
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4))
#error "Need GCC >= 3.4 for SSE intrinsics"
#endif
#if !defined(__amd64__) && !defined(__x86_64__)
#error "Need x86-64 for SSE"
#endif
#include <mmintrin.h>
#include <xmmintrin.h>
int main () {
__m64 v = _mm_cvtsi32_si64 (1);
v = _mm_shuffle_pi16 (v, _MM_SHUFFLE(3, 3, 3, 3));
return _mm_cvtsi64_si32 (v);
}], have_sse_intrinsics=yes)
CFLAGS=$xserver_save_CFLAGS
AC_MSG_RESULT($have_sse_intrinsics)
if test $have_sse_intrinsics = yes ; then
AC_DEFINE(USE_SSE, 1, [use SSE compiler intrinsics])
MMX_CFLAGS="-msse $MMX_CFLAGS"
fi
AM_CONDITIONAL(USE_SSE, test $have_sse_intrinsics = yes)
dnl ===========================================================================
dnl Check for SSE2
SSE_CFLAGS="-mmmx -msse2 -Winline"
if test "x$GCC" = "xyes"; then
SSE_CFLAGS="$SSE_CFLAGS --param inline-unit-growth=10000 --param large-function-growth=10000 --param max-inline-insns-single=6000"
fi
have_sse2_intrinsics=no
AC_MSG_CHECKING(whether to use SSE2 intrinsics)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -msse2 $SSE_CFLAGS"
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 2))
#error "Need GCC >= 4.2 for SSE2 intrinsics"
#endif
#include <mmintrin.h>
#include <xmmintrin.h>
#include <emmintrin.h>
int main () {
__m128i a, b, c;
c = _mm_xor_si128 (a, b);
return 0;
}], have_sse2_intrinsics=yes)
CFLAGS=$xserver_save_CFLAGS
AC_ARG_ENABLE(sse2,
[AC_HELP_STRING([--disable-sse2],
[disable SSE2 fast paths])],
[enable_sse2=$enableval], [enable_sse2=auto])
if test $enable_sse2 = no ; then
have_sse2_intrinsics=disabled
fi
if test $have_sse2_intrinsics = yes ; then
AC_DEFINE(USE_SSE2, 1, [use SSE2 compiler intrinsics])
fi
AC_MSG_RESULT($have_sse2_intrinsics)
if test $enable_sse2 = yes && test $have_sse_intrinsics = no ; then
AC_MSG_ERROR([SSE2 intrinsics not detected])
fi
AM_CONDITIONAL(USE_SSE2, test $have_sse2_intrinsics = yes)
dnl ========================================================
AC_SUBST(MMX_CFLAGS)
AC_SUBST(SSE_CFLAGS)
dnl Check for VMX/Altivec
if test -n "`$CC -v 2>&1 | grep version | grep Apple`"; then
VMX_CFLAGS="-faltivec"
else
VMX_CFLAGS="-maltivec -mabi=altivec"
fi
have_vmx_intrinsics=no
AC_MSG_CHECKING(whether to use VMX/Altivec intrinsics)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $VMX_CFLAGS"
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4))
#error "Need GCC >= 3.4 for sane altivec support"
#endif
#include <altivec.h>
int main () {
vector unsigned int v = vec_splat_u32 (1);
v = vec_sub (v, v);
return 0;
}], have_vmx_intrinsics=yes)
CFLAGS=$xserver_save_CFLAGS
AC_ARG_ENABLE(vmx,
[AC_HELP_STRING([--disable-vmx],
[disable VMX fast paths])],
[enable_vmx=$enableval], [enable_vmx=auto])
if test $enable_vmx = no ; then
have_vmx_intrinsics=disabled
fi
if test $have_vmx_intrinsics = yes ; then
AC_DEFINE(USE_VMX, 1, [use VMX compiler intrinsics])
else
VMX_CFLAGS=
fi
AC_MSG_RESULT($have_vmx_intrinsics)
if test $enable_vmx = yes && test $have_vmx_intrinsics = no ; then
AC_MSG_ERROR([VMX intrinsics not detected])
fi
AC_SUBST(VMX_CFLAGS)
AM_CONDITIONAL(USE_VMX, test $have_vmx_intrinsics = yes)
AC_ARG_ENABLE(gtk,
[AC_HELP_STRING([--enable-gtk],
[enable tests using GTK+ [default=auto]])],
[enable_gtk=$enableval], [enable_gtk=auto])
PKG_PROG_PKG_CONFIG
if test $enable_gtk = auto ; then
PKG_CHECK_EXISTS([gtk+-2.0], [enable_gtk=yes], [enable_gtk=no])
fi
if test $enable_gtk = yes ; then
PKG_CHECK_MODULES(GTK, [gtk+-2.0])
fi
AM_CONDITIONAL(HAVE_GTK, [test "x$enable_gtk" = xyes])
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
AC_SUBST(DEP_CFLAGS)
AC_SUBST(DEP_LIBS)
AC_OUTPUT([pixman-1.pc
pixman-1-uninstalled.pc
Makefile
pixman/Makefile
pixman/pixman-version.h
test/Makefile])