aclocal.m4   [plain text]

# generated automatically by aclocal 1.9.6 -*- Autoconf -*-

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005  Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# Copyright (C) 1995-2002 Free Software Foundation, Inc.
# Copyright (C) 2001-2003,2004 Red Hat, Inc.
#
# This file is free software, distributed under the terms of the GNU
# General Public License.  As a special exception to the GNU General
# Public License, this file may be distributed as part of a program
# that contains a configuration script generated by Autoconf, under
# the same distribution terms as the rest of that program.
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
#
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995, 1996
#
# Modified to never use included libintl. 
# Owen Taylor <otaylor@redhat.com>, 12/15/1998
#
# Major rework to remove unused code
# Owen Taylor <otaylor@redhat.com>, 12/11/2002
#
# Added better handling of ALL_LINGUAS from GNU gettext version 
# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002
#
# Modified to require ngettext
# Matthias Clasen <mclasen@redhat.com> 08/06/2004
#
# We need this here as well, since someone might use autoconf-2.5x
# to configure GLib then an older version to configure a package
# using AM_GLIB_GNU_GETTEXT
AC_PREREQ(2.53)

dnl
dnl We go to great lengths to make sure that aclocal won't 
dnl try to pull in the installed version of these macros
dnl when running aclocal in the glib directory.
dnl
m4_copy([AC_DEFUN],[glib_DEFUN])
m4_copy([AC_REQUIRE],[glib_REQUIRE])
dnl
dnl At the end, if we're not within glib, we'll define the public
dnl definitions in terms of our private definitions.
dnl

# GLIB_LC_MESSAGES
#--------------------
glib_DEFUN([GLIB_LC_MESSAGES],
  [AC_CHECK_HEADERS([locale.h])
    if test $ac_cv_header_locale_h = yes; then
    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
    if test $am_cv_val_LC_MESSAGES = yes; then
      AC_DEFINE(HAVE_LC_MESSAGES, 1,
        [Define if your <locale.h> file defines LC_MESSAGES.])
    fi
  fi])

# GLIB_PATH_PROG_WITH_TEST
#----------------------------
dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
glib_DEFUN([GLIB_PATH_PROG_WITH_TEST],
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
  /*)
  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in ifelse([$5], , $PATH, [$5]); do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if [$3]; then
	ac_cv_path_$1="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
  ;;
esac])dnl
$1="$ac_cv_path_$1"
if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
  AC_MSG_RESULT([$]$1)
else
  AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])

# GLIB_WITH_NLS
#-----------------
glib_DEFUN([GLIB_WITH_NLS],
  dnl NLS is obligatory
  [USE_NLS=yes
    AC_SUBST(USE_NLS)

    gt_cv_have_gettext=no

    CATOBJEXT=NONE
    XGETTEXT=:
    INTLLIBS=

    AC_CHECK_HEADER(libintl.h,
     [gt_cv_func_dgettext_libintl="no"
      libintl_extra_libs=""

      #
      # First check in libc
      #
      AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc,
        [AC_TRY_LINK([
#include <libintl.h>
],
         [return !ngettext ("","", 1)],
	  gt_cv_func_ngettext_libc=yes,
          gt_cv_func_ngettext_libc=no)
        ])
  
      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
	      AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
        	[AC_TRY_LINK([
#include <libintl.h>
],
	          [return !dgettext ("","")],
		  gt_cv_func_dgettext_libc=yes,
	          gt_cv_func_dgettext_libc=no)
        	])
      fi
  
      if test "$gt_cv_func_ngettext_libc" = "yes" ; then
        AC_CHECK_FUNCS(bind_textdomain_codeset)
      fi

      #
      # If we don't have everything we want, check in libintl
      #
      if test "$gt_cv_func_dgettext_libc" != "yes" \
	 || test "$gt_cv_func_ngettext_libc" != "yes" \
         || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then
        
        AC_CHECK_LIB(intl, bindtextdomain,
	    [AC_CHECK_LIB(intl, ngettext,
		    [AC_CHECK_LIB(intl, dgettext,
			          gt_cv_func_dgettext_libintl=yes)])])

	if test "$gt_cv_func_dgettext_libintl" != "yes" ; then
	  AC_MSG_CHECKING([if -liconv is needed to use gettext])
	  AC_MSG_RESULT([])
  	  AC_CHECK_LIB(intl, ngettext,
          	[AC_CHECK_LIB(intl, dcgettext,
		       [gt_cv_func_dgettext_libintl=yes
			libintl_extra_libs=-liconv],
			:,-liconv)],
		:,-liconv)
        fi

        #
        # If we found libintl, then check in it for bind_textdomain_codeset();
        # we'll prefer libc if neither have bind_textdomain_codeset(),
        # and both have dgettext and ngettext
        #
        if test "$gt_cv_func_dgettext_libintl" = "yes" ; then
          glib_save_LIBS="$LIBS"
          LIBS="$LIBS -lintl $libintl_extra_libs"
          unset ac_cv_func_bind_textdomain_codeset
          AC_CHECK_FUNCS(bind_textdomain_codeset)
          LIBS="$glib_save_LIBS"

          if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then
            gt_cv_func_dgettext_libc=no
          else
            if test "$gt_cv_func_dgettext_libc" = "yes" \
		&& test "$gt_cv_func_ngettext_libc" = "yes"; then
              gt_cv_func_dgettext_libintl=no
            fi
          fi
        fi
      fi

      if test "$gt_cv_func_dgettext_libc" = "yes" \
	|| test "$gt_cv_func_dgettext_libintl" = "yes"; then
        gt_cv_have_gettext=yes
      fi
  
      if test "$gt_cv_func_dgettext_libintl" = "yes"; then
        INTLLIBS="-lintl $libintl_extra_libs"
      fi
  
      if test "$gt_cv_have_gettext" = "yes"; then
	AC_DEFINE(HAVE_GETTEXT,1,
	  [Define if the GNU gettext() function is already present or preinstalled.])
	GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
	if test "$MSGFMT" != "no"; then
          glib_save_LIBS="$LIBS"
          LIBS="$LIBS $INTLLIBS"
	  AC_CHECK_FUNCS(dcgettext)
	  MSGFMT_OPTS=
	  AC_MSG_CHECKING([if msgfmt accepts -c])
	  GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[
msgid ""
msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Project-Id-Version: test 1.0\n"
"PO-Revision-Date: 2007-02-15 12:01+0100\n"
"Last-Translator: test <foo@bar.xx>\n"
"Language-Team: C <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Transfer-Encoding: 8bit\n"
], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])])
	  AC_SUBST(MSGFMT_OPTS)
	  AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
	  GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
	    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
	  AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
			 return _nl_msg_cat_cntr],
	    [CATOBJEXT=.gmo 
             DATADIRNAME=share],
	    [case $host in
	    *-*-solaris*)
	    dnl On Solaris, if bind_textdomain_codeset is in libc,
	    dnl GNU format message catalog is always supported,
            dnl since both are added to the libc all together.
	    dnl Hence, we'd like to go with DATADIRNAME=share and
	    dnl and CATOBJEXT=.gmo in this case.
            AC_CHECK_FUNC(bind_textdomain_codeset,
	      [CATOBJEXT=.gmo 
               DATADIRNAME=share],
	      [CATOBJEXT=.mo
               DATADIRNAME=lib])
	    ;;
	    *)
	    CATOBJEXT=.mo
            DATADIRNAME=lib
	    ;;
	    esac])
          LIBS="$glib_save_LIBS"
	  INSTOBJEXT=.mo
	else
	  gt_cv_have_gettext=no
	fi
      fi
    ])

    if test "$gt_cv_have_gettext" = "yes" ; then
      AC_DEFINE(ENABLE_NLS, 1,
        [always defined to indicate that i18n is enabled])
    fi

    dnl Test whether we really found GNU xgettext.
    if test "$XGETTEXT" != ":"; then
      dnl If it is not GNU xgettext we define it as : so that the
      dnl Makefiles still can work.
      if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
        : ;
      else
        AC_MSG_RESULT(
	  [found xgettext program is not GNU xgettext; ignore it])
        XGETTEXT=":"
      fi
    fi

    # We need to process the po/ directory.
    POSUB=po

    AC_OUTPUT_COMMANDS(
      [case "$CONFIG_FILES" in *po/Makefile.in*)
        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
      esac])

    dnl These rules are solely for the distribution goal.  While doing this
    dnl we only have to keep exactly one list of the available catalogs
    dnl in configure.in.
    for lang in $ALL_LINGUAS; do
      GMOFILES="$GMOFILES $lang.gmo"
      POFILES="$POFILES $lang.po"
    done

    dnl Make all variables we use known to autoconf.
    AC_SUBST(CATALOGS)
    AC_SUBST(CATOBJEXT)
    AC_SUBST(DATADIRNAME)
    AC_SUBST(GMOFILES)
    AC_SUBST(INSTOBJEXT)
    AC_SUBST(INTLLIBS)
    AC_SUBST(PO_IN_DATADIR_TRUE)
    AC_SUBST(PO_IN_DATADIR_FALSE)
    AC_SUBST(POFILES)
    AC_SUBST(POSUB)
  ])

# AM_GLIB_GNU_GETTEXT
# -------------------
# Do checks necessary for use of gettext. If a suitable implementation 
# of gettext is found in either in libintl or in the C library,
# it will set INTLLIBS to the libraries needed for use of gettext
# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable
# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST()
# on various variables needed by the Makefile.in.in installed by 
# glib-gettextize.
dnl
glib_DEFUN([GLIB_GNU_GETTEXT],
  [AC_REQUIRE([AC_PROG_CC])dnl
   AC_REQUIRE([AC_HEADER_STDC])dnl
   
   GLIB_LC_MESSAGES
   GLIB_WITH_NLS

   if test "$gt_cv_have_gettext" = "yes"; then
     if test "x$ALL_LINGUAS" = "x"; then
       LINGUAS=
     else
       AC_MSG_CHECKING(for catalogs to be installed)
       NEW_LINGUAS=
       for presentlang in $ALL_LINGUAS; do
         useit=no
         if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then
           desiredlanguages="$LINGUAS"
         else
           desiredlanguages="$ALL_LINGUAS"
         fi
         for desiredlang in $desiredlanguages; do
 	   # Use the presentlang catalog if desiredlang is
           #   a. equal to presentlang, or
           #   b. a variant of presentlang (because in this case,
           #      presentlang can be used as a fallback for messages
           #      which are not translated in the desiredlang catalog).
           case "$desiredlang" in
             "$presentlang"*) useit=yes;;
           esac
         done
         if test $useit = yes; then
           NEW_LINGUAS="$NEW_LINGUAS $presentlang"
         fi
       done
       LINGUAS=$NEW_LINGUAS
       AC_MSG_RESULT($LINGUAS)
     fi

     dnl Construct list of names of catalog files to be constructed.
     if test -n "$LINGUAS"; then
       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
     fi
   fi

   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
   dnl Try to locate is.
   MKINSTALLDIRS=
   if test -n "$ac_aux_dir"; then
     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
   fi
   if test -z "$MKINSTALLDIRS"; then
     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
   fi
   AC_SUBST(MKINSTALLDIRS)

   dnl Generate list of files to be processed by xgettext which will
   dnl be included in po/Makefile.
   test -d po || mkdir po
   if test "x$srcdir" != "x."; then
     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
       posrcprefix="$srcdir/"
     else
       posrcprefix="../$srcdir/"
     fi
   else
     posrcprefix="../"
   fi
   rm -f po/POTFILES
   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
	< $srcdir/po/POTFILES.in > po/POTFILES
  ])

# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE)
# -------------------------------
# Define VARIABLE to the location where catalog files will
# be installed by po/Makefile.
glib_DEFUN([GLIB_DEFINE_LOCALEDIR],
[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl
glib_save_prefix="$prefix"
glib_save_exec_prefix="$exec_prefix"
glib_save_datarootdir="$datarootdir"
test "x$prefix" = xNONE && prefix=$ac_default_prefix
test "x$exec_prefix" = xNONE && exec_prefix=$prefix
datarootdir=`eval echo "${datarootdir}"`
if test "x$CATOBJEXT" = "x.mo" ; then
  localedir=`eval echo "${libdir}/locale"`
else
  localedir=`eval echo "${datadir}/locale"`
fi
prefix="$glib_save_prefix"
exec_prefix="$glib_save_exec_prefix"
datarootdir="$glib_save_datarootdir"
AC_DEFINE_UNQUOTED($1, "$localedir",
  [Define the location where the catalogs will be installed])
])

dnl
dnl Now the definitions that aclocal will find
dnl
ifdef(glib_configure_in,[],[
AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)])
AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)])
])dnl

# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL])
# 
# Create a temporary file with TEST-FILE as its contents and pass the
# file name to PROGRAM.  Perform ACTION-IF-PASS if PROGRAM exits with
# 0 and perform ACTION-IF-FAIL for any other exit status.
AC_DEFUN([GLIB_RUN_PROG],
[cat >conftest.foo <<_ACEOF
$2
_ACEOF
if AC_RUN_LOG([$1 conftest.foo]); then
  m4_ifval([$3], [$3], [:])
m4_ifvaln([$4], [else $4])dnl
echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD
sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD
fi])



dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml])
# serial 36 IT_PROG_INTLTOOL
AC_DEFUN([IT_PROG_INTLTOOL],
[AC_PREREQ([2.50])dnl

case "$am__api_version" in
    1.[01234])
	AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool])
    ;;
    *)
    ;;
esac

if test -n "$1"; then
    AC_MSG_CHECKING([for intltool >= $1])

    INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
    INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in`
    [INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in`
    ]
    AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])
    test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||
	AC_MSG_ERROR([Your intltool is too old.  You need intltool $1 or later.])
fi

  INTLTOOL_DESKTOP_RULE='%.desktop:   %.desktop.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
     INTLTOOL_KEYS_RULE='%.keys:      %.keys.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
     INTLTOOL_PROP_RULE='%.prop:      %.prop.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
      INTLTOOL_OAF_RULE='%.oaf:       %.oaf.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@'
     INTLTOOL_PONG_RULE='%.pong:      %.pong.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
   INTLTOOL_SERVER_RULE='%.server:    %.server.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
    INTLTOOL_SHEET_RULE='%.sheet:     %.sheet.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
       INTLTOOL_UI_RULE='%.ui:        %.ui.in        $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
      INTLTOOL_XML_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
      INTLTOOL_XML_NOMERGE_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' 
      INTLTOOL_XAM_RULE='%.xam:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
      INTLTOOL_KBD_RULE='%.kbd:       %.kbd.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
    INTLTOOL_CAVES_RULE='%.caves:     %.caves.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
  INTLTOOL_SCHEMAS_RULE='%.schemas:   %.schemas.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
    INTLTOOL_THEME_RULE='%.theme:     %.theme.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' 
    INTLTOOL_SERVICE_RULE='%.service: %.service.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
   INTLTOOL_POLICY_RULE='%.policy:    %.policy.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

AC_SUBST(INTLTOOL_DESKTOP_RULE)
AC_SUBST(INTLTOOL_DIRECTORY_RULE)
AC_SUBST(INTLTOOL_KEYS_RULE)
AC_SUBST(INTLTOOL_PROP_RULE)
AC_SUBST(INTLTOOL_OAF_RULE)
AC_SUBST(INTLTOOL_PONG_RULE)
AC_SUBST(INTLTOOL_SERVER_RULE)
AC_SUBST(INTLTOOL_SHEET_RULE)
AC_SUBST(INTLTOOL_SOUNDLIST_RULE)
AC_SUBST(INTLTOOL_UI_RULE)
AC_SUBST(INTLTOOL_XAM_RULE)
AC_SUBST(INTLTOOL_KBD_RULE)
AC_SUBST(INTLTOOL_XML_RULE)
AC_SUBST(INTLTOOL_XML_NOMERGE_RULE)
AC_SUBST(INTLTOOL_CAVES_RULE)
AC_SUBST(INTLTOOL_SCHEMAS_RULE)
AC_SUBST(INTLTOOL_THEME_RULE)
AC_SUBST(INTLTOOL_SERVICE_RULE)
AC_SUBST(INTLTOOL_POLICY_RULE)

# Check the gettext tools to make sure they are GNU
AC_PATH_PROG(XGETTEXT, xgettext)
AC_PATH_PROG(MSGMERGE, msgmerge)
AC_PATH_PROG(MSGFMT, msgfmt)
if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then
    AC_MSG_ERROR([GNU gettext tools not found; required for intltool])
fi
xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"
mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"
mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"
if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then
    AC_MSG_ERROR([GNU gettext tools not found; required for intltool])
fi

# Use the tools built into the package, not the ones that are installed.
AC_SUBST(INTLTOOL_EXTRACT, '$(top_builddir)/intltool-extract')
AC_SUBST(INTLTOOL_MERGE, '$(top_builddir)/intltool-merge')
AC_SUBST(INTLTOOL_UPDATE, '$(top_builddir)/intltool-update')

AC_PATH_PROG(INTLTOOL_PERL, perl)
if test -z "$INTLTOOL_PERL"; then
   AC_MSG_ERROR([perl not found; required for intltool])
fi
if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then
   AC_MSG_ERROR([perl 5.x required for intltool])
fi
if test "x$2" != "xno-xml"; then
   AC_MSG_CHECKING([for XML::Parser])
   if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
       AC_MSG_RESULT([ok])
   else
       AC_MSG_ERROR([XML::Parser perl module is required for intltool])
   fi
fi

# Substitute ALL_LINGUAS so we can use it in po/Makefile
AC_SUBST(ALL_LINGUAS)

# Set DATADIRNAME correctly if it is not set yet
# (copied from glib-gettext.m4)
if test -z "$DATADIRNAME"; then
  AC_LINK_IFELSE(
    [AC_LANG_PROGRAM([[]],
                     [[extern int _nl_msg_cat_cntr;
                       return _nl_msg_cat_cntr]])],
    [DATADIRNAME=share],
    [case $host in
    *-*-solaris*)
    dnl On Solaris, if bind_textdomain_codeset is in libc,
    dnl GNU format message catalog is always supported,
    dnl since both are added to the libc all together.
    dnl Hence, we'd like to go with DATADIRNAME=share
    dnl in this case.
    AC_CHECK_FUNC(bind_textdomain_codeset,
      [DATADIRNAME=share], [DATADIRNAME=lib])
    ;;
    *)
    [DATADIRNAME=lib]
    ;;
    esac])
fi
AC_SUBST(DATADIRNAME)

IT_PO_SUBDIR([po])

dnl The following is very similar to
dnl
dnl	AC_CONFIG_FILES([intltool-extract intltool-merge intltool-update])
dnl
dnl with the following slight differences:
dnl  - the *.in files are in ac_aux_dir,
dnl  - if the file haven't changed upon reconfigure, it's not touched,
dnl  - the evaluation of the third parameter enables a hack which computes
dnl    the actual value of $libdir,
dnl  - the user sees "executing intltool commands", instead of
dnl    "creating intltool-extract" and such.
dnl
dnl Nothing crucial here, and we could use AC_CONFIG_FILES, if there were
dnl a reason for it.

AC_CONFIG_COMMANDS([intltool], [

for file in intltool-extract intltool-merge intltool-update; do
  sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \
      -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \
      -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \
	< ${ac_aux_dir}/${file}.in > ${file}.out
  if cmp -s ${file} ${file}.out 2>/dev/null; then
    rm -f ${file}.out
  else
    mv -f ${file}.out ${file}
  fi
  chmod ugo+x ${file}
  chmod u+w ${file}
done

],
[INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}'
prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir" 
INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}'])

])


# IT_PO_SUBDIR(DIRNAME)
# ---------------------
# All po subdirs have to be declared with this macro; the subdir "po" is
# declared by IT_PROG_INTLTOOL.
#
AC_DEFUN([IT_PO_SUBDIR],
[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS.
dnl
dnl The following CONFIG_COMMANDS should be exetuted at the very end
dnl of config.status.
AC_CONFIG_COMMANDS_PRE([
  AC_CONFIG_COMMANDS([$1/stamp-it], [
    rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp"
    >"$1/stamp-it.tmp"
    [sed '/^#/d
	 s/^[[].*] *//
	 /^[ 	]*$/d
	'"s|^|	$ac_top_srcdir/|" \
      "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES"
    ]
    if test ! -f "$1/Makefile"; then
      AC_MSG_ERROR([$1/Makefile is not ready.])
    fi
    mv "$1/Makefile" "$1/Makefile.tmp"
    [sed '/^POTFILES =/,/[^\\]$/ {
		/^POTFILES =/!d
		r $1/POTFILES
	  }
	 ' "$1/Makefile.tmp" >"$1/Makefile"]
    rm -f "$1/Makefile.tmp"
    mv "$1/stamp-it.tmp" "$1/stamp-it"
  ])
])dnl
])


# deprecated macros
AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])
# A hint is needed for aclocal from Automake <= 1.9.4:
# AC_DEFUN([AC_PROG_INTLTOOL], ...)


# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])

# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
	 [AM_AUTOMAKE_VERSION([1.9.6])])

# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-

# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])

# AM_CONDITIONAL                                            -*- Autoconf -*-

# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 7

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
 ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
  AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])


# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 8

# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...


# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                   [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output
  # in D'.
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir
  # We will build objects and dependencies in a subdirectory because
  # it helps to detect inapplicable dependency modes.  For instance
  # both Tru64's cc and ICC support -MD to output dependencies as a
  # side effect of compilation, but ICC will put the dependencies in
  # the current directory while Tru64 will put them in the object
  # directory.
  mkdir sub

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  for depmode in $am_compiler_list; do
    # Setup a source with many dependencies, because some compilers
    # like to wrap large dependency lists on column 80 (with \), and
    # we should not choose a depcomp mode which is confused by this.
    #
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    : > sub/conftest.c
    for i in 1 2 3 4 5 6; do
      echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
      # Solaris 8's {/usr,}/bin/sh.
      touch sub/conftst$i.h
    done
    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf

    case $depmode in
    nosideeffect)
      # after this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    none) break ;;
    esac
    # We check with `-c' and `-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle `-M -o', and we need to detect this.
    if depmode=$depmode \
       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
         >/dev/null 2>conftest.err &&
       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      # icc doesn't choke on unknown options, it will just issue warnings
      # or remarks (even with -Werror).  So we grep stderr for any message
      # that says an option was ignored or not supported.
      # When given -MP, icc 7.0 and 7.1 complain thusly:
      #   icc: Command line warning: ignoring option '-M'; no argument required
      # The diagnosis changed in icc 8.0:
      #   icc: Command line remark: option '-MP' not supported
      if (grep 'ignoring option' conftest.err ||
          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
        am_cv_$1_dependencies_compiler_type=$depmode
        break
      fi
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
  test "x$enable_dependency_tracking" != xno \
  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])


# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])


# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[  --disable-dependency-tracking  speeds up one-time build
  --enable-dependency-tracking   do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])
])

# Generate code to set up dependency tracking.              -*- Autoconf -*-

# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

#serial 3

# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[for mf in $CONFIG_FILES; do
  # Strip MF so we end up with the name of the file.
  mf=`echo "$mf" | sed -e 's/:.*$//'`
  # Check whether this is an Automake generated Makefile or not.
  # We used to match only the files named `Makefile.in', but
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
  # So let's grep whole file.
  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
    dirpart=`AS_DIRNAME("$mf")`
  else
    continue
  fi
  # Extract the definition of DEPDIR, am__include, and am__quote
  # from the Makefile without running `make'.
  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
  test -z "$DEPDIR" && continue
  am__include=`sed -n 's/^am__include = //p' < "$mf"`
  test -z "am__include" && continue
  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n 's/^U = //p' < "$mf"`
  # Find all dependency output files, they are included files with
  # $(DEPDIR) in their names.  We invoke sed twice because it is the
  # simplest approach to changing $(DEPDIR) to its actual value in the
  # expansion.
  for file in `sed -n "
    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`AS_DIRNAME(["$file"])`
    AS_MKDIR_P([$dirpart/$fdir])
    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS


# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled.  FIXME.  This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])

# Do all the work for Automake.                             -*- Autoconf -*-

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 12

# This macro actually does too much.  Some checks are only needed if
# your package does certain things.  But this isn't really a big deal.

# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out.  PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition.  After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names.  We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
   test -f $srcdir/config.status; then
  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi

# test whether we have cygpath
if test -z "$CYGPATH_W"; then
  if (cygpath --version) >/dev/null 2>/dev/null; then
    CYGPATH_W='cygpath -w'
  else
    CYGPATH_W=echo
  fi
fi
AC_SUBST([CYGPATH_W])

# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
 AC_SUBST([PACKAGE], [$1])dnl
 AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
 AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
 AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl

# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target.  The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
	      		     [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
                  [_AM_DEPENDENCIES(CC)],
                  [define([AC_PROG_CC],
                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
                  [_AM_DEPENDENCIES(CXX)],
                  [define([AC_PROG_CXX],
                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
])


# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated.  The stamp files are numbered to have different names.

# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $1 | $1:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])

# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])

# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 2

# Check whether the underlying file-system supports filenames
# with a leading dot.  For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
  am__leading_dot=.
else
  am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])

# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
# From Jim Meyering

# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 4

AC_DEFUN([AM_MAINTAINER_MODE],
[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
  dnl maintainer-mode is disabled by default
  AC_ARG_ENABLE(maintainer-mode,
[  --enable-maintainer-mode  enable make rules and dependencies not useful
			  (and sometimes confusing) to the casual installer],
      USE_MAINTAINER_MODE=$enableval,
      USE_MAINTAINER_MODE=no)
  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
  MAINT=$MAINTAINER_MODE_TRUE
  AC_SUBST(MAINT)dnl
]
)

AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])

# Check to see how 'make' treats includes.	            -*- Autoconf -*-

# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 3

# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
	@echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
   am__include=include
   am__quote=
   _am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
      am__include=.include
      am__quote="\""
      _am_result=BSD
   fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])

# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-

# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 4

# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])


# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
  am_missing_run="$MISSING --run "
else
  am_missing_run=
  AC_MSG_WARN([`missing' script is too old or missing])
fi
])

# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_MKDIR_P
# ---------------
# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
#
# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
# created by `make install' are always world readable, even if the
# installer happens to have an overly restrictive umask (e.g. 077).
# This was a mistake.  There are at least two reasons why we must not
# use `-m 0755':
#   - it causes special bits like SGID to be ignored,
#   - it may be too restrictive (some setups expect 775 directories).
#
# Do not use -m 0755 and let people choose whatever they expect by
# setting umask.
#
# We cannot accept any implementation of `mkdir' that recognizes `-p'.
# Some implementations (such as Solaris 8's) are not thread-safe: if a
# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
# concurrently, both version can detect that a/ is missing, but only
# one can create it and the other will error out.  Consequently we
# restrict ourselves to GNU make (using the --version option ensures
# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
  # We used to keeping the `.' as first argument, in order to
  # allow $(mkdir_p) to be used without argument.  As in
  #   $(mkdir_p) $(somedir)
  # where $(somedir) is conditionally defined.  However this is wrong
  # for two reasons:
  #  1. if the package is installed by a user who cannot write `.'
  #     make install will fail,
  #  2. the above comment should most certainly read
  #     $(mkdir_p) $(DESTDIR)$(somedir)
  #     so it does not work when $(somedir) is undefined and
  #     $(DESTDIR) is not.
  #  To support the latter case, we have to write
  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
  #  so the `.' trick is pointless.
  mkdir_p='mkdir -p --'
else
  # On NextStep and OpenStep, the `mkdir' command does not
  # recognize any option.  It will interpret all options as
  # directories to create, and then abort because `.' already
  # exists.
  for d in ./-p ./--version;
  do
    test -d $d && rmdir $d
  done
  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
  if test -f "$ac_aux_dir/mkinstalldirs"; then
    mkdir_p='$(mkinstalldirs)'
  else
    mkdir_p='$(install_sh) -d'
  fi
fi
AC_SUBST([mkdir_p])])

# Helper functions for option handling.                     -*- Autoconf -*-

# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 3

# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

# _AM_SET_OPTION(NAME)
# ------------------------------
# Set option NAME.  Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])

# _AM_SET_OPTIONS(OPTIONS)
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

# Check to make sure that the build environment is sane.    -*- Autoconf -*-

# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 4

# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
   if test "$[*]" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftest.file`
   fi
   rm -f conftest.file
   if test "$[*]" != "X $srcdir/configure conftest.file" \
      && test "$[*]" != "X conftest.file $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
alias in your environment])
   fi

   test "$[2]" = conftest.file
   )
then
   # Ok.
   :
else
   AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])

# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries.  This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'.  However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
  AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])

# Check how to create a tarball.                            -*- Autoconf -*-

# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# serial 2

# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
#     tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
#     $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.
AM_MISSING_PROG([AMTAR], [tar])
m4_if([$1], [v7],
     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
     [m4_case([$1], [ustar],, [pax],,
              [m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
  case $_am_tool in
  gnutar)
    for _am_tar in tar gnutar gtar;
    do
      AM_RUN_LOG([$_am_tar --version]) && break
    done
    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
    am__untar="$_am_tar -xf -"
    ;;
  plaintar)
    # Must skip GNU tar: if it does not support --format= it doesn't create
    # ustar tarball either.
    (tar --version) >/dev/null 2>&1 && continue
    am__tar='tar chf - "$$tardir"'
    am__tar_='tar chf - "$tardir"'
    am__untar='tar xf -'
    ;;
  pax)
    am__tar='pax -L -x $1 -w "$$tardir"'
    am__tar_='pax -L -x $1 -w "$tardir"'
    am__untar='pax -r'
    ;;
  cpio)
    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
    am__untar='cpio -i -H $1 -d'
    ;;
  none)
    am__tar=false
    am__tar_=false
    am__untar=false
    ;;
  esac

  # If the value was cached, stop now.  We just wanted to have am__tar
  # and am__untar set.
  test -n "${am_cv_prog_tar_$1}" && break

  # tar/untar a dummy directory, and stop if the command works
  rm -rf conftest.dir
  mkdir conftest.dir
  echo GrepMe > conftest.dir/file
  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
  rm -rf conftest.dir
  if test -s conftest.tar; then
    AM_RUN_LOG([$am__untar <conftest.tar])
    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
  fi
done
rm -rf conftest.dir

AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR