<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <!-- ***************************************************************************** * Copyright 1996-2002,2003 by Thomas E. Dickey * * All Rights Reserved. * * * * Permission to use, copy, modify, and distribute this software and its * * documentation for any purpose and without fee is hereby granted, provided * * that the above copyright notice appear in all copies and that both that * * copyright notice and this permission notice appear in supporting * * documentation, and that the name of the above listed copyright holder(s) * * not be used in advertising or publicity pertaining to distribution of the * * software without specific, written prior permission. * * * * THE ABOVE LISTED COPYRIGHT HOLDER(S) DISCLAIM ALL WARRANTIES WITH REGARD * * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND * * FITNESS, IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE LIABLE * * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * ***************************************************************************** $XFree86: xc/programs/xterm/xterm.log.html,v 1.115 2004/02/01 02:14:49 dickey Exp $ --> <HTML> <HEAD> <TITLE>XTERM - Change Log</TITLE> <LINK REV=MADE HREF="mailto:dickey@invisible-island.net"> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> </HEAD> <BODY> <HR> Copyright 1997-2002,2003 by <A HREF="mailto:dickey@invisible-island.net">Thomas E. Dickey</A> <HR> <H1>Contents</H1> This file contains a list of the changes that I have made for XFree86 xterm, from the notes that I add when submitting a patch. <P> You should note that other changes have been made as well, by other people, to fix bugs and correct ifdef's for portability. All of these are summarized in the XFree86 CHANGELOG (found in the unbundled tree, xc/programs/Xserver/hw/xfree86). <UL> <LI><A HREF="#xterm_dev">Development - 2004/1/31 - XFree86 4.3.99.903</A> <LI><A HREF="#xterm_184">Patch #184 - 2003/12/31 - XFree86 4.3.99.903</A> <LI><A HREF="#xterm_183">Patch #183 - 2003/12/26 - XFree86 4.3.99.903</A> <LI><A HREF="#xterm_182">Patch #182 - 2003/12/2 - XFree86 4.3.99.901</A> <LI><A HREF="#xterm_181">Patch #181 - 2003/10/26 - XFree86 4.3.99.15</A> <LI><A HREF="#xterm_180">Patch #180 - 2003/10/12 - XFree86 4.3.99.15</A> <LI><A HREF="#xterm_179">Patch #179 - 2003/5/21 - XFree86 4.3.99.5</A> <LI><A HREF="#xterm_178">Patch #178 - 2003/5/18 - XFree86 4.3.99.5</A> <LI><A HREF="#xterm_177">Patch #177 - 2003/3/23 - XFree86 4.3.0</A> <LI><A HREF="#xterm_176">Patch #176 - 2003/3/22 - XFree86 4.3.0</A> <LI><A HREF="#xterm_175">Patch #175 - 2003/3/9 - XFree86 4.3.0</A> <LI><A HREF="#xterm_174">Patch #174 - 2003/2/25 - XFree86 4.2.99.903</A> <LI><A HREF="#xterm_173">Patch #173 - 2003/2/6 - XFree86 4.2.99.902</A> <LI><A HREF="#xterm_172">Patch #172 - 2002/12/27 - XFree86 4.2.99.3</A> <LI><A HREF="#xterm_171">Patch #171 - 2002/12/12 - XFree86 4.2.99.3</A> <LI><A HREF="#xterm_170">Patch #170 - 2002/10/13 - XFree86 4.2.1</A> <LI><A HREF="#xterm_169">Patch #169 - 2002/10/5 - XFree86 4.2.1</A> <LI><A HREF="#xterm_168">Patch #168 - 2002/9/29 - XFree86 4.2.1</A> <LI><A HREF="#xterm_167">Patch #167 - 2002/8/24 - XFree86 4.2.0</A> <LI><A HREF="#xterm_166">Patch #166 - 2002/3/25 - XFree86 4.2.0</A> <LI><A HREF="#xterm_165">Patch #165 - 2002/1/5 - XFree86 4.1.0</A> <LI><A HREF="#xterm_164">Patch #164 - 2001/11/13 - XFree86 4.1.0</A> <LI><A HREF="#xterm_163">Patch #163 - 2001/11/04 - XFree86 4.1.0</A> <LI><A HREF="#xterm_162">Patch #162 - 2001/10/23 - XFree86 4.1.0</A> <LI><A HREF="#xterm_161">Patch #161 - 2001/10/10 - XFree86 4.1.0</A> <LI><A HREF="#xterm_160">Patch #160 - 2001/10/7 - XFree86 4.1.0</A> <LI><A HREF="#xterm_159">Patch #159 - 2001/9/19 - XFree86 4.1.0</A> <LI><A HREF="#xterm_158">Patch #158 - 2001/9/8 - XFree86 4.1.0</A> <LI><A HREF="#xterm_157">Patch #157 - 2001/6/18 - XFree86 4.1.0</A> <LI><A HREF="#xterm_156">Patch #156 - 2001/4/28 - XFree86 4.0.3</A> <LI><A HREF="#xterm_155">Patch #155 - 2001/4/20 - XFree86 4.0.3</A> <LI><A HREF="#xterm_154">Patch #154 - 2001/4/11 - XFree86 4.0.3</A> <LI><A HREF="#xterm_153">Patch #153 - 2001/3/29 - XFree86 4.0.3</A> <LI><A HREF="#xterm_152">Patch #152 - 2001/3/13 - XFree86 4.0.2</A> <LI><A HREF="#xterm_151">Patch #151 - 2001/3/10 - XFree86 4.0.2</A> <LI><A HREF="#xterm_150">Patch #150 - 2000/12/29 - XFree86 4.0.2</A> <LI><A HREF="#xterm_149">Patch #149 - 2000/12/6 - XFree86 4.0.1h</A> <LI><A HREF="#xterm_148">Patch #148 - 2000/10/31 - XFree86 4.0.1d</A> <LI><A HREF="#xterm_147">Patch #147 - 2000/10/26 - XFree86 4.0.1c</A> <LI><A HREF="#xterm_146">Patch #146 - 2000/9/12 - XFree86 4.0.1c</A> <LI><A HREF="#xterm_145">Patch #145 - 2000/9/11 - XFree86 4.0.1c</A> <LI><A HREF="#xterm_144">Patch #144 - 2000/8/23 - XFree86 4.0.1b</A> <LI><A HREF="#xterm_143">Patch #143 - 2000/8/19 - XFree86 4.0.1b</A> <LI><A HREF="#xterm_142">Patch #142 - 2000/8/18 - XFree86 4.0.1b</A> <LI><A HREF="#xterm_141">Patch #141 - 2000/7/14 - XFree86 4.0.1b</A> <LI><A HREF="#xterm_140">Patch #140 - 2000/7/23 - XFree86 4.0.1</A> <LI><A HREF="#xterm_139">Patch #139 - 2000/6/17 - XFree86 4.0d</A> <LI><A HREF="#xterm_138">Patch #138 - 2000/6/15 - XFree86 4.0c</A> <LI><A HREF="#xterm_137">Patch #137 - 2000/6/10 - XFree86 4.0b</A> <LI><A HREF="#xterm_136">Patch #136 - 2000/6/3 - XFree86 4.0b</A> <LI><A HREF="#xterm_135">Patch #135 - 2000/5/29 - XFree86 4.0b</A> <LI><A HREF="#xterm_134">Patch #134 - 2000/5/28 - XFree86 4.0b</A> <LI><A HREF="#xterm_133">Patch #133 - 2000/5/2 - XFree86 4.0a</A> <LI><A HREF="#xterm_132">Patch #132 - 2000/4/11 - XFree86 4.0a</A> <LI><A HREF="#xterm_131">Patch #131 - 2000/3/3 - XFree86 3.9.18b</A> <LI><A HREF="#xterm_130">Patch #130 - 2000/3/1 - XFree86 3.9.18a</A> <LI><A HREF="#xterm_129">Patch #129 - 2000/2/26 - XFree86 3.9.18a</A> <LI><A HREF="#xterm_128">Patch #128 - 2000/2/17 - XFree86 3.9.18</A> <LI><A HREF="#xterm_127">Patch #127 - 2000/2/12 - XFree86 3.9.17e</A> <LI><A HREF="#xterm_126">Patch #126 - 2000/2/8 - XFree86 3.9.17c</A> <LI><A HREF="#xterm_125">Patch #125 - 2000/1/31 - XFree86 3.9.17c</A> <LI><A HREF="#xterm_124">Patch #124 - 2000/1/27 - XFree86 3.9.17b</A> <LI><A HREF="#xterm_123">Patch #123 - 2000/1/22 - XFree86 3.9.17a</A> <LI><A HREF="#xterm_122">Patch #122 - 1999/12/28 - XFree86 3.9.16f</A> <LI><A HREF="#xterm_121">Patch #121 - 1999/11/14 - XFree86 3.9.16c</A> <LI><A HREF="#xterm_120">Patch #120 - 1999/10/28 - XFree86 3.9.16c</A> <LI><A HREF="#xterm_119">Patch #119 - 1999/10/16 - XFree86 3.9.16c</A> <LI><A HREF="#xterm_118">Patch #118 - 1999/10/5 - XFree86 3.9.16b</A> <LI><A HREF="#xterm_117">Patch #117 - 1999/9/29 - XFree86 3.9.16b</A> <LI><A HREF="#xterm_116">Patch #116 - 1999/9/25 - XFree86 3.9.16a</A> <LI><A HREF="#xterm_115">Patch #115 - 1999/9/18 - XFree86 3.9.16a</A> <LI><A HREF="#xterm_114">Patch #114 - 1999/9/15 - XFree86 3.9.16</A> <LI><A HREF="#xterm_113">Patch #113 - 1999/8/15 - XFree86 3.9.15b</A> <LI><A HREF="#xterm_112">Patch #112 - 1999/7/17 - XFree86 3.9Pw</A> <LI><A HREF="#xterm_111">Patch #111 - 1999/7/10 - XFree86 3.9Pw</A> <LI><A HREF="#xterm_110">Patch #110 - 1999/6/29 - XFree86 3.9Pu</A> <LI><A HREF="#xterm_109">Patch #109 - 1999/6/23 - XFree86 3.9Pt</A> <LI><A HREF="#xterm_108">Patch #108 - 1999/6/19 - XFree86 3.9Ps</A> <LI><A HREF="#xterm_107">Patch #107 - 1999/6/12 - XFree86 3.9Pq</A> <LI><A HREF="#xterm_106">Patch #106 - 1999/6/9 - XFree86 3.9Pq</A> <LI><A HREF="#xterm_105">Patch #105 - 1999/6/5 - XFree86 3.9Pp</A> <LI><A HREF="#xterm_104">Patch #104 - 1999/5/30 - XFree86 3.9Pn</A> <LI><A HREF="#xterm_103">Patch #103 - 1999/5/14 - XFree86 3.9Pm</A> <LI><A HREF="#xterm_102">Patch #102 - 1999/5/12 - XFree86 3.9Pm</A> <LI><A HREF="#xterm_101">Patch #101 - 1999/5/10 - XFree86 3.9Pm</A> <LI><A HREF="#xterm_100">Patch #100 - 1999/5/3 - XFree86 3.9Pl</A> <LI><A HREF="#xterm_99">Patch #99 - 1999/5/2 - XFree86 3.9Pk</A> <LI><A HREF="#xterm_98">Patch #98 - 1999/4/26 - XFree86 3.9Pk</A> <LI><A HREF="#xterm_97">Patch #97 - 1999/4/25 - XFree86 3.9Pk</A> <LI><A HREF="#xterm_96">Patch #96 - 1999/4/19 - XFree86 3.9Pj</A> <LI><A HREF="#xterm_95">Patch #95 - 1999/4/5 - XFree86 3.9Ph</A> <LI><A HREF="#xterm_94">Patch #94 - 1999/3/27 - XFree86 3.9Pf</A> <LI><A HREF="#xterm_93">Patch #93 - 1999/3/14 - XFree86 3.9Pd</A> <LI><A HREF="#xterm_92">Patch #92 - 1999/2/5 - XFree86 3.9Nz</A> <LI><A HREF="#xterm_91">Patch #91 - 1999/1/21 - XFree86 3.9Nw</A> <LI><A HREF="#xterm_90">Patch #90 - 1998/12/13 - XFree86 3.9Nq</A> <LI><A HREF="#xterm_89">Patch #89 - 1998/11/20 - XFree86 3.9Nm</A> <LI><A HREF="#xterm_88">Patch #88 - 1998/10/31 - XFree86 3.9Nk and 3.3.2h</A> <LI><A HREF="#xterm_87">Patch #87 - 1998/10/21 - XFree86 3.9Nj and 3.3.2f</A> <LI><A HREF="#xterm_86">Patch #86 - 1998/10/14 - XFree86 3.9Nj and 3.3.2e</A> <LI><A HREF="#xterm_85">Patch #85 - 1998/10/12 - XFree86 3.9Nj and 3.3.2e</A> <LI><A HREF="#xterm_84">Patch #84 - 1998/10/9 - XFree86 3.9Ni and 3.3.2e</A> <LI><A HREF="#sync_83">Resync #83 - 1998/10/7 - XFree86 3.3.2e</A> <LI><A HREF="#xterm_83">Patch #83 - 1998/8/25 - XFree86 3.9Nb</A> <LI><A HREF="#xterm_82">Patch #82 - 1998/7/15 - XFree86 3.9Aj</A> <LI><A HREF="#xterm_81">Patch #81 - 1998/7/14 - XFree86 3.9Aj</A> <LI><A HREF="#xterm_80">Patch #80 - 1998/6/29 - XFree86 3.9Ai</A> <LI><A HREF="#xterm_79">Patch #79 - 1998/6/28 - XFree86 3.9Ai</A> <LI><A HREF="#xterm_78">Patch #78 - 1998/6/3 - XFree86 3.9Ah and 3.3.2</A> <LI><A HREF="#xterm_77">Patch #77 - 1998/5/26 - XFree86 3.9Ah and 3.3.2</A> <LI><A HREF="#xterm_76">Patch #76 - 1998/5/8 - XFree86 3.9Ah and 3.3.2</A> <LI><A HREF="#xterm_75">Patch #75 - 1998/5/7 - XFree86 3.9Ah and 3.3.2</A> <LI><A HREF="#xterm_74">Patch #74 - 1998/4/27 - XFree86 3.9Ag and 3.3.2</A> <LI><A HREF="#xterm_73">Patch #73 - 1998/4/25 - XFree86 3.9Ag and 3.3.2</A> <LI><A HREF="#xterm_72">Patch #72 - 1998/4/17 - XFree86 3.9Ag and 3.3.2</A> <LI><A HREF="#xterm_71">Patch #71 - 1998/4/12 - XFree86 3.9Ag and 3.3.2</A> <LI><A HREF="#xterm_70">Patch #70 - 1998/3/29 - XFree86 3.9Af and 3.3.2</A> <LI><A HREF="#xterm_69">Patch #69 - 1998/3/16 - XFree86 3.9Ad and 3.3.2</A> <LI><A HREF="#xterm_68">Patch #68 - 1998/3/4 - XFree86 3.9Ad and 3.3.1z</A> <LI><A HREF="#xterm_67">Patch #67 - 1998/2/23 - XFree86 3.9Ad and 3.3.1e</A> <LI><A HREF="#xterm_66">Patch #66 - 1998/2/16 - XFree86 3.9Ad and 3.3.1d</A> <LI><A HREF="#xterm_65">Patch #65 - 1998/2/14 - XFree86 3.9Ad and 3.3.1c</A> <LI><A HREF="#xterm_64">Patch #64 - 1998/2/8 - XFree86 3.9Ad</A> <LI><A HREF="#xterm_63">Patch #63 - 1998/2/5 - XFree86 3.9Ad</A> <LI><A HREF="#xterm_62">Patch #62 - 1998/1/23 - XFree86 3.9Ac</A> <LI><A HREF="#xterm_61">Patch #61 - 1998/1/17 - XFree86 3.9Ac</A> <LI><A HREF="#xterm_60">Patch #60 - 1998/1/10 - XFree86 3.9Ab</A> <LI><A HREF="#xterm_59">Patch #59 - 1998/1/5 - XFree86 3.9Ab</A> <LI><A HREF="#xterm_58">Patch #58 - 1998/1/3 - XFree86 3.9Ab</A> <LI><A HREF="#xterm_57">Patch #57 - 1997/12/26 - XFree86 3.9Aa</A> <LI><A HREF="#xterm_56">Patch #56 - 1997/11/28 - XFree86 3.9x</A> <LI><A HREF="#xterm_55">Patch #55 - 1997/11/25 - XFree86 3.9x</A> <LI><A HREF="#xterm_54">Patch #54 - 1997/10/17 - XFree86 3.9s</A> <LI><A HREF="#xterm_53">Patch #53 - 1997/10/12 - XFree86 3.9r</A> <LI><A HREF="#xterm_52">Patch #52 - 1997/9/29 - XFree86 3.9q</A> <LI><A HREF="#xterm_51">Patch #51 - 1997/9/15 - XFree86 3.9p</A> <LI><A HREF="#xterm_50">Patch #50 - 1997/8/22 - XFree86 3.9m</A> <LI><A HREF="#xterm_49">Patch #49 - 1997/8/10 - XFree86 3.9k</A> <LI><A HREF="#xterm_48">Patch #48 - 1997/7/26 - XFree86 3.9j</A> <LI><A HREF="#xterm_47">Patch #47 - 1997/7/13 - XFree86 3.9i</A> <LI><A HREF="#xterm_46">Patch #46 - 1997/7/4 - XFree86 3.9h</A> <LI><A HREF="#xterm_45">Patch #45 - 1997/7/2 - XFree86 3.9h</A> <LI><A HREF="#xterm_44">Patch #44 - 1997/6/22 - XFree86 3.9g</A> <LI><A HREF="#xterm_43">Patch #43 - 1997/6/10 - XFree86 3.9d</A> <LI><A HREF="#xterm_42">Patch #42 - 1997/6/8 - XFree86 3.2Xl</A> <LI><A HREF="#xterm_41">Patch #41 - 1997/5/28 - XFree86 3.2Xl</A> <LI><A HREF="#xterm_40">Patch #40 - 1997/5/26 - XFree86 3.2Xl</A> <LI><A HREF="#xterm_39">Patch #39 - 1997/5/24 - XFree86 3.2Xl</A> <LI><A HREF="#xterm_38">Patch #38 - 1997/5/22 - XFree86 3.2Xh</A> <LI><A HREF="#xterm_37">Patch #37 - 1997/5/7 - XFree86 3.9a</A> <LI><A HREF="#xterm_36">Patch #36 - 1997/1/16 - XFree86 3.2r</A> <LI><A HREF="#xterm_35">Patch #35 - 1997/1/7 - XFree86 3.2o</A> <LI><A HREF="#xterm_34">Patch #34 - 1997/1/5 - XFree86 3.2o</A> <LI><A HREF="#xterm_33">Patch #33 - 1996/11/24 - XFree86 3.2</A> <LI><A HREF="#xterm_32">Patch #32 - 1996/11/21 - XFree86 3.2</A> <LI><A HREF="#xterm_31">Patch #31 - 1996/11/16 - XFree86 3.2</A> <LI><A HREF="#xterm_30">Patch #30 - 1996/11/16 - XFree86 3.2</A> <LI><A HREF="#xterm_29">Patch #29 - 1996/9/15 - XFree86 3.1.2Gb</A> <LI><A HREF="#xterm_28">Patch #28 - 1996/8/31 - XFree86 3.1.2F</A> <LI><A HREF="#xterm_27">Patch #27 - 1996/8/21 - XFree86 3.1.2Ek</A> <LI><A HREF="#xterm_26">Patch #26 - 1996/8/20 - XFree86 3.1.2Ei</A> <LI><A HREF="#xterm_25">Patch #25 - 1996/8/18 - XFree86 3.1.2Ei</A> <LI><A HREF="#xterm_24">Patch #24 - 1996/8/11 - XFree86 3.1.2Ee</A> <LI><A HREF="#xterm_23">Patch #23 - 1996/7/31 - XFree86 3.1.2Ec</A> <LI><A HREF="#xterm_22">Patch #22 - 1996/7/26 - XFree86 3.1.2Ec</A> <LI><A HREF="#xterm_21">Patch #21 - 1996/7/24 - XFree86 3.1.2Ec</A> <LI><A HREF="#xterm_20">Patch #20 - 1996/7/24 - XFree86 3.1.2Ec</A> <LI><A HREF="#xterm_19">Patch #19 - 1996/7/21 - XFree86 3.1.2Ec</A> <LI><A HREF="#xterm_18">Patch #18 - 1996/7/18 - XFree86 3.1.2Ec</A> <LI><A HREF="#xterm_17">Patch #17 - 1996/7/2 - XFree86 3.1.2Eb</A> <LI><A HREF="#xterm_16">Patch #16 - 1996/6/25 - XFree86 3.1.2Ea</A> <LI><A HREF="#xterm_15">Patch #15 - 1996/5/29 - XFree86 3.1.2E</A> <LI><A HREF="#xterm_14">Patch #14 - 1996/5/12 - XFree86 3.1.2Dj</A> <LI><A HREF="#xterm_13">Patch #13 - 1996/4/23 - XFree86 3.1.2Df</A> <LI><A HREF="#xterm_12">Patch #12 - 1996/3/16 - XFree86 3.1.2Dc</A> <LI><A HREF="#xterm_11">Patch #11 - 1996/3/5 - XFree86 3.1.2Db</A> <LI><A HREF="#xterm_10">Patch #10 - 1996/2/14 - XFree86 3.1.2Cd</A> <LI><A HREF="#xterm_09">Patch #9 - 1996/2/10 - XFree86 3.1.2Cb</A> <LI><A HREF="#xterm_08">Patch #8 - 1996/2/9 - XFree86 3.1.2Cb</A> <LI><A HREF="#xterm_07">Patch #7 - 1996/1/28 - XFree86 3.1.2n</A> <LI><A HREF="#xterm_06">Patch #6 - 1996/1/8</A> <LI><A HREF="#xterm_05">Patch #5 - 1996/1/7</A> <LI><A HREF="#xterm_04">Patch #4 - 1996/1/7</A> <LI><A HREF="#xterm_03">Patch #3 - 1996/1/7</A> <LI><A HREF="#xterm_02">Patch #2 - 1996/1/7</A> <LI><A HREF="#xterm_01">Patch #1 - 1996/1/6</A> </UL> <H1><A NAME="xterm_dev">Development - 2004/1/31 - XFree86 4.3.99.903</A></H1> <ul> <li>amend fix for XFree86 Bugzilla #981, adjusting for savedlines value (report by Tim Adye). <li>fix a typo in computing relative font size (Jess Thrysoee). </ul> <H1><A NAME="xterm_184">Patch #184 - 2003/12/31 - XFree86 4.3.99.903</A></H1> <ul> <li>improve configure-script checks for FreeType and related libraries, using <code>xft-config</code> or <code>freetype-config</code> scripts when available. <li>fix configure-script check for <code>SYSV</code> definition by ensuring whether <code>sys_errlist[]</code> is declared, and by modifying the test program to include <code>X11/Intrinsic.h</code> to check that <code>wchar_t</code> is declared consistently (report by H Merijn Brand). </ul> <H1><A NAME="xterm_183">Patch #183 - 2003/12/26 - XFree86 4.3.99.903</A></H1> <ul> <li>correct logic for configurations that may attempt to open both old/new-style pseudoterminals. In this case, the old-style are preferred. Logic was broken in <a href="#xterm_145">patch #145</a> (XFree86 Bugzilla #997, report/patch by Kean Johnston). <li>modify handling of <code>eightBitInput</code> resource in UTF-8 mode to translate the value into UTF-8. Otherwise an illegal UTF-8 code is sent to the application (report by Bram Moolenaar). <li>modify <code>uxterm</code> script to interpret help and version options so xterm does not always create a window when the user requests this information (Debian #223926). <li>add a limit check to ScrnTstWrapped() (XFree86 Bugzilla #981). <li>modify DECSCL to perform a hard reset (RIS) as per DEC manuals. Extended DECSCL to accept parameters for vt4XX and vt5xx terminals. <li>correct logic for ANSI conformance level escape sequences, which were confused with DEC conformance level escape sequences. <li>correct state for vt52 shift-in/shift-out, which was not reset properly after <a href="#xterm_171">patch #171</a>. <li>correct handling of graphics characters for vt52 mode, which did not display line-drawing characters after G1 fix from <a href="#xterm_182">patch #182</a>. <li>fixes for configure script to work with current Cygwin headers and libraries. <li>modify <code>Imakefile</code> to put the current directory at the beginning of the include searchpath (David Dawes). </ul> <H1><A NAME="xterm_182">Patch #182 - 2003/12/2 - XFree86 4.3.99.901</A></H1> <ul> <li>correct logic for <code>metaSendsEscape</code> resource to allow for the meta-right key to be tested. Improve check for meta/alt modifiers by dropping the assumption that a keysym is associated with only one modifier, and by ignoring NoSymbol entries in the xmodmap data (XFree86 Bugzilla #924, patch by David Dawes). <li>correct wrapping logic for line-drawing characters written in non-UTF-8 mode of xterm build for wide-characters (XFree86 Bugzilla #918, report/patch by Jürgen Keil). <li>improve manpage description of resources, in particular the <code>utf8Fonts</code> class (XFree86 Bugzilla #905). <li>add definitions to compile with glibc-based GNU/Hurd, GNU/KFreeBSD and GNU/KNetBSD (XFree86 Bugzilla #893). <li>compiler-warning fixes (patch by Christian Biere). <li>add README.i18n (Tomohiro KUBOTA). <li>correct initialization of G1 character set mapping, which used line-drawing set as a result of confusion between "DEC Supplemental Graphic" and "DEC Special Graphic" character sets (see <a href="#xterm_34">patch #34</a> regarding DECSTR). <li>correct ifdef in main.c for variable utret (patch by Bernhard Rosenkraenzer). <li>document in xterm's manpage how to use XFree86 ":unscaled" keyword to suppress scaling of bold fonts. <li>when deriving bold fontname from normal fontname, use the normal font's average width to avoid for example selecting 7x13bold from an 8x13 normal font (Debian #107769). </ul> <H1><A NAME="xterm_181">Patch #181 - 2003/10/26 - XFree86 4.3.99.15</A></H1> <ul> <li>implement <code>boldMode</code> for wide-character logic in <code>drawXtermText()</code> (report by Michael Schroeder). <li>modify <code>UXTerm.ad</code> resource file to include "XTerm-color" rather than "XTerm", in case the latter file contains no color resource definitions, e.g., after <a href="#xterm_180">patch #180</a>. <li>add action <code>load-vt-fonts()</code> and configure option <code>--enable-load-vt-fonts</code> which allows users to define additional sets of VT-fonts which can be loaded at runtime. <li>add logic to wide-character support which attempts to load fonts specified by <code>utf8Fonts</code> subresources at startup. The subresources have the same names as the fonts which they replace, e.g., <code>font</code>, <code>font1</code>, etc., so that the ISO-10646-1 fonts can be specified in the <code>XTerm</code> app-defaults file (this is an adaptation of a patch by Tomohiro KUBOTA). <li>improve Set Font escape string handling by making the relative settings apply to the size of the font, as in shift keypad plus/minus rather than the menu index. <li>simplify parameter passing for the <code>set-vt-font</code> action and related code. <li>cleanup some include-ordering, moving some recently-added hardcoded stuff into xterm.h where it will not interfere with the configure script. <li>modify <code>xtermAddInput()</code> (see note on augmentation in <a href="#xterm_158">patch #158</a>) to use the complete set of default keyboard translations so that one can use shifted pageup, wheel mouse, etc., while the mouse pointer is over the scrollbar. (Debian #178812). <li>make save/restore mode controls apply to show/blink cursor states. <li>add escape sequence to start/stop blinking cursor, which allows implementing <code>cvvis</code> terminfo capability (request by Nate Bargmann). <li>add <code>indp</code> and <code>rin</code> to terminfo entry. <li>fix an out-of-bounds array reference in ScrnRefresh() for wide characters (report by Dan Harnett, patch by Todd Miller, bug dates from <a href="#xterm_141">patch #141</a>). </ul> <H1><A NAME="xterm_180">Patch #180 - 2003/10/12 - XFree86 4.3.99.15</A></H1> <ul> <li>several fixes for rendering using Xft (option <code>-fa</code>): <ul> <li>translate Unicode values (from UTF-8 output to xterm) for line-drawing to xterm's internal code, etc., since TrueType fonts generally do not have either set of line-drawing glyphs. xterm can draw these directly (report by Abigail Brady). <li>pass 16-bit values rather than 8-bit values to xtermXftDrawString() to allow for wide-characters. <li>remove spurious check for <code>colorBDMode</code> resource in logic that does bold fonts. <li>implement underlining. </ul> <li>patches by Ilya Zakharevich: <ul> <li>improve drawXtermText() by making the recursive calls communicate through arguments, and not through saving/restoring global variables. <li>make double-width characters work with <code>-u8</code> option. <li>modify lookup of double-sized fonts by checking for a match ignoring x/y resolution if the first check fails. </ul> <li>make height of TrueType fonts match ascent+descent (patch by Keith Packard). <li>correct configure-script check for imake $CFLAGS, which did not check properly if imake was not available. <li>correct install rule in Makefile.in for <code>uxterm</code>, which was attempting to strip the script (newsgroup posting by Fernan Aguero). <li>correct AF/AB strings in termcap for xterm-256color and xterm-88color entries (report by Josh Howard). <li>update wcwidth.c to incorporate changes from Markus Kuhn's 2003-05-20 (Unicode 4.0) version of that file. <li>modify <code>scroll-back</code> and <code>scroll-forw</code> actions to accept an adjustment value, e.g., <pre> <code>scroll-back(1, page-2)</code></pre> to scroll back by 2 lines less than a page (patch by Greg Klanderman). <li>use color resource setting from Debian package for xterm VT100 widget, since the choice of blues provides better contrast. <li>remove color resources from <code>XTerm.ad</code>, leaving them only in <code>XTerm-col.ad</code> (prompted by Debian package for xterm). <li>correct configure script option --enable-pty-handshake (report by Paul Gilmartin). <li>add <code>visualBellDelay</code> resource to modify the length of time used for visual bell, for very slow displays or very fast computers (reports by Ingo van Lil and Doug Toppin). <li>correct logic for initializing dynamic highlight color (patch by Jess Thrysoee). <li>add a check for non-zero size in call to <code>XCopyArea()</code> to accommodate a Solaris bug. <li>correct typo in example for character classes in xterm manpage (Debian #198910). <li>link xterm with bind_on_load option on Darwin to work around a deadlock in the dynamic loader when a signal is received while the dynamic loader is looking up symbols (patches by Rob Braun, Torrey Lyons). <li>modify configure script to avoid using "head -1". <li>update config.guess, config.sub <li>modify ifdef's to work around inclusion of types FcChar32 and XftCharSpec with FreeType 2.0 (see <a href="#xterm_175">patch #175</a>). <li>modify the predictable version of the generated logfile name (see <a href="#xterm_171">patch #171</a>) to append the process-id rather than a random value. <li>resync with XFree86 CVS: <ul> <li>Enable SCO function keys in xterm <li>Make Delete key send DEL by default on SCO in xterm </ul> </ul> <H1><A NAME="xterm_179">Patch #179 - 2003/5/21 - XFree86 4.3.99.5</A></H1> <ul> <li>modify ifdef's for WTMPX_FILE to allow building on cygwin again. <li>change the default of pty-handshaking configure option (and related default for imake) to assume this feature is needed. <li>add ifdef's so configure option for XawPlus library works (patch by Pavel Roskin). <li>add <code>$(MAIN_DEFINES)</code> to the variables checked by the configure script that may contain information set by imake. This allows xterm to build/run properly using the configure script on IRIX64. <li>add configure check for ".exe" suffix on cygwin. </ul> <H1><A NAME="xterm_178">Patch #178 - 2003/5/18 - XFree86 4.3.99.5</A></H1> <ul> <li>modify default for configure <code>--enable-pty-handshake</code> option to enable it for Solaris (report by Nelson Beebe). <li>modify <code>in_put()</code> function to call <code>PreeditPosition()</code> only when the cursor's position has changed. This addresses report by Stefan Baums of high CPU usage while xterm with chinput are running in the background (patch by Yong Li). <li>improved explanation of <code>-ls</code> conflict with <code>-e</code> option in xterm manpage (adapted from comments by Henning Makholm). <li>correct comment in terminfo file regarding modifier used for <code>kDC</code> (Debian #189764, report by Henning Makholm). <li>correct/extend some of the keypad description in ctlseqs.ms (report by Henning Makholm). <li>correct keypad-mapping table in input.c so <code>XK_KP_Equal</code> works (report by Henning Makholm). <li>modified to work with CJK double-width (bi-width/monospace) fonts. They're similar to Roman Czbora and David Starner's gnuunifonts in that Latin letters and numbers have all the same width which is exactly the half of the width of East Asian characters. (patch by Jungshik Shin <jshin@mailaps.org>). <li>add configure option <code>--enable-broken-osc</code> and resource <code>brokenLinuxOSC</code> to accommodate scripts which do not distinguish between running in the Linux console and running in X. Linux console recognizes malformed control strings which start with an <code>OSC</code>, but are fixed-length, with no terminator. <li>add configure option <code>--enable-broken-st</code> and resource <code>brokenStringTerm</code> to allow user to revert one part of the parsing table corrections from <a href="#xterm_171">patch #171</a>. (reports by Matthias Scheler and Kirill Ponomarew indicate that someone's network firmware sends an <code><escape>X</code>). <li>modify configure <code>--disable-imake</code> to provide values for <code>OSMAJORVERSION</code>, <code>OSMINORVERSION</code>, <code>FUNCPROTO</code> and <code>NARROWPROTO</code> (report by Heiko Schlichting). <li>correct <code>vttests/16colors.sh</code>, which omitted the <code>$SUF</code> variable in output strings (patch by Paul Gilmartin). <li>modify shell scripts in <code>vttests</code> directory to attempt to use named signals in the <code>trap</code> statement, making this portable to OS/390 (report by Paul Gilmartin). Tested on SunOS 4.1.4, which implements only numbers. </ul> <H1><A NAME="xterm_177">Patch #177 - 2003/3/23 - XFree86 4.3.0</A></H1> <ul> <li>fix definition of <code>USE_HANDSHAKE</code>, must be numeric (reported by Jens Schleusener). </ul> <H1><A NAME="xterm_176">Patch #176 - 2003/3/22 - XFree86 4.3.0</A></H1> <ul> <li>add configure option <code>--enable-pty-handshake</code> to allow one to compile-in support for the pty handshaking logic, and resource <code>ptyHandshake</code> to enable or disable it (suggested by Ian Collier). <li>restore <code>USE_HANDSHAKE</code> ifdef removed in <a href="#xterm_159">patch #159</a> to address Debian #39964. <li>move ifdef's for ttysize/winsize into xterm_io.h <li>simplify loop on <code>tgetent</code>, check if the successive entries in the lookup table are the same. That makes xterm do one less lookup if there is no "xterm" entry in the termcap file (report by Derek Martin). <li>correct manpage discussion of <code>$TERM</code> and <code>$TERMCAP</code> variables, which omitted the Tektronix emulation and a note of the final "dumb" fallback. <li>broaden ifdef for <code>XRegisterIMInstantiateCallback()</code> from <a href="#xterm_175">patch #175</a> (XIM fix) to exclude non-XFree86 (report by Nelson Beebe indicates this breaks for Solaris, IRIX and OSF/1). <li>correct resource-size for <code>iconFont</code> (this was added by X11R6.3). <li>improve configure check for XKB bell extension, to work around inconsistent implementation of this feature (reports by Nelson Beebe, Kriston Rehberg and David Ellement). <li>modify configure-check for <code>tty</code> group to be less strict in batch mode (report by Nelson Beebe). <li>modify to allow building with g++, to use its compiler warnings (suggested by Nelson Beebe). <li>modify <code>dec2ucs[]</code> table to reflect newer codes available for scanlines 1, 3, 7, 9 (report by Michael Schroeder). <li>add configure option for XawPlus library. </ul> <H1><A NAME="xterm_175">Patch #175 - 2003/3/9 - XFree86 4.3.0</A></H1> <ul> <li>fix a SIGSEGV which could occur if xterm is connecting to XIM server, and the XIM server is destroyed (patch by Nam SungHyun). <li>modify to use built-in line-drawing characters for Xft fonts (patch by Andrew Tipton). <li>make menu reflect the state of the <code>tekInhibit</code> resource. <li>make <code>signalInhibit</code> resource work, i.e., disable the menu entries that would send signals to, or exit xterm. This was probably broken in X11R5 when logging was disabled (report by Sven Mascheck). <li>changed classes of <code>colorBDMode</code> and similar resources that override colors when a video attribute is set to <code>ColorAttrMode</code>, to make them distinct from <code>ColorMode</code>. This avoids an unexpected rendering of reverse video, for example (report by Paul Fox). <li>changed class of <code>veryBoldColors</code> to <code>VeryBoldColors</code>, since <code>ColorMode</code> is associated with boolean resources. <li>add option <code>-k8</code> and resource <code>allowC1Printable</code> to allow users of non-VTxxx character sets such as KOI-8 to treat the C1 control area (character codes 128-159) as printable rather than control characters. <li>add a null-pointer check for return-value of <code>ptsname()</code> in HPUX-specific code (report by David Ellement). <li>revise the ifdef's used for <code>XKB</code> bell support. The code was using a nonstandard call <code>XkbStdBell()</code>. Changed to use <code>XkbBell()</code> (based on patch by <derek@signalmarketing.com>). <li>add a null-pointer check in <code>xtermLoadFont()</code> in case there is no wide-bold font (Nam SungHyun). <li>change <code>Makefile.in</code> to use autoconf's <code>bindir</code>, <code>libdir</code> and <code>mandir</code> variables (report by Nam SungHyun). <li>add <code>le</code> to termcap <code>xterm-basic</code> entry. Though missing from older termcaps for xterm, some applications check for it (report by Matthias Buelow). <li>modify <code>uxterm</code> script to strip modifiers such as "@euro" from the locale setting before adding ".UTF-8" (Debian #179929). <li>modify the remaining places where tek4014 emulation uses <code>XDefineCursor()</code>, to make it work as originally implemented, e.g., when switching back to alpha mode. Added test-screen in vttest to test this feature properly. </ul> <H1><A NAME="xterm_174">Patch #174 - 2003/2/25 - XFree86 4.2.99.903</A></H1> <ul> <li>work-around for XFree86 bug which made <code>XDefineCursor()</code> on a shell-window no longer work. The tek4014 emulation used this. Use the next lower window (report by Karl Rudolf Bauchspiess). <li>add a resource setting to control whether the extended window operations should be allowed, e.g., resize, iconify, report window attributes. This is to accommodate people who are not capable of using a pager to view log-files. </ul> <H1><A NAME="xterm_173">Patch #173 - 2003/2/6 - XFree86 4.2.99.902</A></H1> <ul> <li>reset mouse mode to normal on a full reset. This does not apply to mouse hilite tracking mode, of course (see ctlseqs.ms). <li>add a time-delay at the point where mouse hilite tracking mode choses to not handle X events, to avoid runaway CPU usage (report by D Hugh Redelmeier). <li>check for illegal character in DECUDK string, quit if detected. </ul> <H1><A NAME="xterm_172">Patch #172 - 2002/12/27 - XFree86 4.2.99.3</A></H1> <ul> <li>fixes to make repainting of 256-color example work properly (reports by Abigail Brady and Scott A Crosby). <ul> <li>set flag in <code>AllocateAnsiColor()</code> to ensure the color is allocated once only. <li>fix check in <code>ScrnRefresh</code>, which was comparing background colors only if the ANSI foreground colors also were set. </ul> <li>merge <code>Error()</code> calls and some <code>exit()</code> calls into <code>SysError()</code>, and change that to add the brief explanation for each error code which is provided in the manpage. Change a few <code>SysError()</code>, calls to avoid using code 1, to avoid confusion with exit status from places that do not use <code>SysError()</code>. <li>simplify logic used to open a debug logfile as the standard error. <li>modify the <code>-e</code> option so that if it fails, xterm will check if only one argument follows, e.g., it was quoted, and then retry using <code>sh -c</code>. <li>modify parsing of DECUDK string parameter to allow a comma between pairs of hexadecimal digits (Ray Neuman <raymond@one.com.au> reports that "real" terminals accept this; perhaps they simply ignore unexpected characters). <li>fix a few problems with the <code>$TERMCAP</code> string generated by <code>resize</code>: <ul> <li>for Bourne shell, add an <code>export</code> command. This was missing as far back as X11R5. <li>escape exclamation marks, used in xterm's reset string. <li>translate literal <code>\177\</code> to "^?". </ul> <li>improve configure check for <code>tgetent()</code> to work when <code>$TERMCAP</code> has been set to a specific entry. <li>modify <code>minstall.sh</code> to use "%" rather than "@", to avoid problems with AFS (report by Zdenek Sekera). <li>list fatal error codes from <code>error.h</code> in the manpage, remove unused codes in <code>error.h</code>. <li>use more explicit wording for manpage list of color resources, since at least one user confused the generic names such as "black" with the names in rgb.txt (the latter are now used). <li>minor fix to description of 1003 mouse mode in ctlseqs.ms (Larry Riedel). </ul> <H1><A NAME="xterm_171">Patch #171 - 2002/12/12 - XFree86 4.2.99.3</A></H1> <ul> <li>modify parser tables to improve detection of malformed control sequences, making xterm behave more like a real DEC terminal (patch by Paul Williams). <li>update comment in <code>input.c</code> to document <code>Meta</code> as a modifier for escape sequences (patch by D Roland Walker). <li>add ifdef'd code for logging option which adds the hostname and a timestamp to the generated logfile name. The ifdef's are setup with the configure script (patch by Nelson Beebe). <li>remove <code>xevents()</code> call from the end of <code>BlinkCursor()</code>, to fix an occasional problem which caused xterm to pause until a key was pressed. The reason for this was that there was no check to ensure that there really were events for <code>xevents()</code> to process. (patch by Semen A Ustimenko <semenu@FreeBSD.org>). <li>remove unused mode-params from <code>open()</code> calls that do not create a file. <li>modify configure script to put new items first on <code>$CPPFLAGS</code> and <code>$CFLAGS</code> to avoid conflict with environment's <em>-I</em> and <em>-D</em> options. <li>update config.guess, config.sub <li>resync with XFree86 CVS: <ul> <li>fix va_args glitches for xterm/libfontconfig: 0 == (void*)0 isn't true for all platforms (Egbert Eich). <li>initialise ProgramName in xterm's main before referencing it (#5473, Peter Valchev). <li>some cleanup of Imakefile ifdef's (Marc La France). </ul> </ul> <H1><A NAME="xterm_170">Patch #170 - 2002/10/13 - XFree86 4.2.1</A></H1> <ul> <li>correct an off-by-one allocating data for sorted help message. <li>modify configure script to check for Xpm library, on which XFree86 Xaw library depends. <li>update config.guess, config.sub </ul> <H1><A NAME="xterm_169">Patch #169 - 2002/10/5 - XFree86 4.2.1</A></H1> <ul> <li>modify wording of some options in help message to make them use <code>-/+</code> consistently with respect to "on/off" or "off/on". <li>sort options list which is displayed in help- and syntax-messages at runtime to simplify maintenance. <li>remove support for Amoeba and Minix (Juliusz Chroboczek noted it was removed from XFree86 server; there have been no users since 1996). <li>add configure script option <code>--disable-session-mgt</code> to control whether the session management code should be compiled-in (request by H Merijn Brand). <li>ifdef'd the session-management changes with <code>OPT_SESSION_MGT</code>, to accommodate X11R5 which predates the related definitions. <li>fix <code>decode_keyvalue()</code>, which did not properly parse multiple settings as needed for the <code>ttyModes</code> resource, since it did not skip over the parsed data. <li>fix an option-parsing conflict between <code>-class</code> and <code>-cjk_width</code> (Nam SungHyun) <li>add a missing null in <code>XtVaSetValues()</code> call used in <code>Cleanup()</code> (Nam SungHyun) </ul> <H1><A NAME="xterm_168">Patch #168 - 2002/9/29 - XFree86 4.2.1</A></H1> <ul> <li>improve data reported for control sequence that requests window position by taking into account the window decorations, e.g., border and title (patch by Jess Thrysoee <jess@thrysoee.dk>). <li>add <code>-cjk_width</code> and corresponding resource <code>cjkWidth</code> (patch by Jungshik Shin <jshin@mailaps.org>). <li>add <code>-into</code> option, for embedding xterm in a Tcl/Tk application (patch by George Peter Staplin <georgeps@xmission.com>). <li>add simple session management (XSM) client capabilities to xterm. So a session manager such as, e.g., xsm, should be able to respawn or kill xterms without the help of an SM proxy (like smproxy), which is a hack and almost always buggy (patch by David Madore). <li>fix conflict between ifdef's for <code>OPT_DEC_LOCATOR</code> and <code>OPT_READLINE</code> in button.c (reported by Ilya Zakharevich). <li>fix for inconsistent use of <code>struct utmp</code> versus <code>struct utmpx</code> introduced in <a href="#xterm_167">patch #167</a> (patches by Paul Gilmartin, Marc La France). <li>modify logic for <code>metaSendsEscape</code> to allow it to work in a setup where the Meta-key is not recognized as a modifier by the key-translations logic (from a discussion of eightBitInput with H.J.Lu, however Vincent Lefevre reported this in January). <li>use null pointer values consistently, rather than literal "0", for ending variable-length argument lists, e.g., for <code>execlp()</code> (based on patch by Matthieu Herrb). <li>correct logic of <code>ChangeAnsiColorRequest()</code>, which would do a screen repaint after replying to a request for information. <li>improve scripts in vttests to work with systems whose shells support <code>echo -n</code> and have, as does Debian, an unrelated <code>print</code> utility. <li>add vttests/acolors.sh to demonstrate OSC 4, which queries or sets ANSI colors. <li>fixes for ctlseqs.ms (Pavel Roskin, Ilya Zakharevich). <li>typos in xterm manpage (Jens Schweikhardt) <li>remove a redundant GCC_UNUSED from InitPopup() (Nam SungHyun) </ul> <H1><A NAME="xterm_167">Patch #167 - 2002/8/24 - XFree86 4.2.0</A></H1> <ul> <li>correct ifdef's for <code>USE_TERMCAP</code> to match cygwin configuration. <li>fix several places in ctlseqs.ms which had no boxes around the literal text (report by Ilya Zakharevich). <li>integrated patch from Ilya Zakharevich to extend mouse support for readline (ifdef'd with OPT_READLINE). <li>modify terminfo description to match default for <code>modifyCursorKeys</code> resource. <li>add <code>modifyCursorKeys</code> resource to control how the shift- and similar modifiers are used to make a cursor escape sequence. The default makes a modified escape sequence always start with CSI and puts the modifier as the second parameter, to avoid confusing applications that would interpret the first parameter as a repeat count. The original behavior can be obtained by setting the resource to 0 (from newsgroup discussion with Stephen J Turnbull and Jeffrey Altman). <li>correct missing initializations for <code>appdefaultCursor</code> and <code>appdefaultKeypad</code> resources. <li>add configure option <code>--enable-luit</code> and ifdef'd the luit-related code with OPT_LUIT_PROG. <li>integrate patch by Tomohiro KUBOTA from http://www.xfree86.org/pipermail/i18n/2002-July/003378.html which modifies xterm to invoke luit. <li>update wcwidth.c to match Markus Kuhn's 2002-05-18 version. <li>correct limit-checking in <code>ComputeSelect()</code> to handle selections that extend off the visible area; rather than modify the parameters to <code>TrackText()</code>, use <code>ScrollSelection()</code> to update the highlighting limits. (reported by Yegappan Lakshmanan and Nelson Beebe, patch by Alexander V Lukyanov). <li>correct manpage description of <code>tiXtraScroll</code> resource (reported by Tony Finch). <li>changes from OpenBSD: <ul> <li>Make xterm setgid utmp to be able to update utmp even with root privileges revoked. <li>If not updating utmp, revoke group privileges totally too. </ul> <li>changes from NetBSD: <ul> <li>Check that the return value from ttyslot() is greater than 0 before writing the utmp file. Fixes w's "w: Stale utmp entry: <user> <tty> <pty>" errors. <li>Use openpty() to deal with new pty naming scheme. </ul> <li>add <code>print-redir</code> action and menu entry to allow user to switch terminal in/out of printer controller mode. It appears from the manual that a real vt220 would not switch back to normal mode, so another mechanism is used (addresses Debian #37517). <li>check if <code>printerCommand</code> resource string is empty, use this to allow user to disable printer function. <li>trim trailing blanks from resource strings. <li>check return value from <code>ptsname()</code>, which may return null for example if someone has changed the permissions of /dev/pts to zero (Debian #121899). <li>modify OS/2 version to use <code>__UNIXOS2__</code> definition rather than <code>__EMX__</code>, related cleanup (patch by Holger Veit). <li>used modified indent 2.0 (patch <a href="ftp://invisible-island.net/gnu-patches/">20020428</a>) to reformat most of the C source files, to simplify maintenance. <li>fix a couple of places where there were leading tabs on symbol-definition lines in Imakefile (Marc La France from report by Tony Finch) <li>add imake variable (TraceXTerm) to allow building debug version (Egbert Eich). </ul> <H1><A NAME="xterm_166">Patch #166 - 2002/03/25 - XFree86 4.2.0</A></H1> <ul> <li>correct a bug in selection: double clicking on a word which was partly scrolled off the screen may select that text (report by Vincent Lefevre <vincent@vinc17.org>). <li>implement <code>veryBoldColors</code> resource to control whether the corresponding video attribute such as <code>bold</code> is displayed when using <code>colorBDMode</code>, etc. (request by Josh Howard <jrh@vicor-nb.com>). <li>define escape sequences for function keys F21-F35 (patch by Steve Wall). <li>change the colors for the 256-color model, making them less skewed toward black (patch by Steve Wall). <li>add <code>vt100Graphics</code> resource (see <a href="#xterm_115">patch #115</a>, based on discussion with Glenn Maynard). <li>ifdef'd Xaw/Xaw3d/neXtaw includes separately to avoid potential incompatibilities between these flavors of Athena widgets. <li>add configure check for XFree86 4.x Xaw library, whose geometry management is broken, to avoid trying to use it for toolbar configuration. <li>updates to configure script from vile and lynx to allow configure.in to be compiled with autoconf 2.5x <li>add a check for null pointer return by <code>ptsname()</code> (newsgroup posting from Mike Silva <mikesilva@lucent.com>). <li>fill in a few details needed to allow UTF-8 mode to switch on/off after startup. This requires that <code>wideChars</code> resource be set. (based on comments in 4 Aug 2001 by Alexey Marinichev <lyosha@lyosha.2y.net>). <li>remove duplicate install rules that make directories, e.g., so installing manpage will not create app-defaults directory. <li>add comment in in <code>do_osc()</code>, reserving cases 30 and 31 for for Konsole (request by Stephan Binner <Stephan.Binner@gmx.de>). <li>fixes for ctlseqs.ms and xterm.man (patch by Werner LEMBERG <wl@gnu.org>). <li>add check for monochrome display, disabling colorMode in that case (fixes Debian #134130). <li>resync with XFree86 CVS: <ul> <li>Fix some xterm build warnings on *BSD (David Dawes). <li>Only use SA_RESTART in xterm when it's available (Frank Liu). <li>Fix incorrect code in signal handlers in most of the clients, xterm and xdm not done yet (Matthieu Herrb). </ul> </ul> <H1><A NAME="xterm_165">Patch #165 - 2002/01/05 - XFree86 4.1.0</A></H1> <ul> <li>modify <code>uxterm</code> script to strip encoding part from environment variable before adding ".UTF-8" (based on Debian #125947, but using a more portable solution). <li>add an assignment statement in VTInitialize() to make <code>awaitInput</code> resource work. <li>use new macros init_Bres(), etc., in VTInitialize() to add trace of the initialization of resources. <li>modify checks for $LC_ALL, related environment variables to ensure the resulting strings are nonempty (report by Markus Kuhn). <li>add an ifdef in charproc.c for num_ptrs variable in case all configure options are disabled. <li>modify definition of getXtermBackground() to avoid negative array index warning on Tru64 (report by Jeremie Petit). <li>improve fix from patch #165 (still Debian #117184, report by Matt Zimmerman <mdz@debian.org>) <li>correct install rule for uxterm in Makefile.in, to handle the case where building in a different directory than xterm's source (patch by Paul Gilmartin). <li>documented ANSI.SYS-style cursor save/restore escape sequences in ctlseqs.ms, which are in xterm since X11R5. <li>correct two entries in the default charClass table, which did not follow the manpage comment about the character number corresponding to the class (patch by Marc Bevand <bevand_m@epita.fr>). <li>fix a couple of typos in comments in the app-defaults files (David Krause <xfree86@davidkrause.com>). <li>resync with XFree86 CVS: <ul> <li>update language of copyrights in some files to reflect the fact that they were reassigned from X Consortium to The Open Group in 1998. Note that this xterm source is derived from the 1996 version from X Consortium, does not incorporate changes made by X Consortium or The Open Group after that date, hence we do not add The Open Group's 1998 copyright date to related files. <li>save/restore <code>errno</code> in signal catcher (Matthieu Herrb). <li>modify UXTerm.ad's font5 resource so that xterm can display double width characters using a font distributed with XFree86 (Tomohiro KUBOTA). </ul> </ul> <H1><A NAME="xterm_164">Patch #163 - 2001/11/13 - XFree86 4.1.0</A></H1> <ul> <li>correct a case where <code>ptyInitialErase</code> and <code>backarrowKeyIsErase</code> resources combine to set <code>DECBKM</code> mode, but a <code>reset</code> command would not reset xterm to that state, making the erase character revert to ^H (Debian #117184) </ul> <H1><A NAME="xterm_163">Patch #163 - 2001/11/04 - XFree86 4.1.0</A></H1> <ul> <li>correct ifdef's for <code>__QNX__</code> and <code>USE_SYSV_PGRP</code> in main.c call to <code>tcsetpgrp</code>, which broke bash behavior around <a href="#xterm_140">patch #140</a> (report/patch by Frank Liu <fliu@mail.vipstage.com>). <li>modify trace.c to fix missing definition of GCC_UNUSED for compilers other than gcc when configured for trace code (report/patch by Paul Gilmartin). <li>change format in TraceOptions() to use long rather than int, since the latter could lose precision on 64-bit machines (report/patch by Nelson Beebe). <li>modify xterm manual page and minstall.sh to allow imake rules to define location of app-defaults directory (Debian #87611). <li>review/update list of conflicting preprocesor symbols to remove from $CPPFLAGS at the end of the configure script. In particular, this allows one to configure xterm without the utempter library on Redhat 7.1 (report/patch by Adam Sulmicki). </ul> <H1><A NAME="xterm_162">Patch #162 - 2001/10/23 - XFree86 4.1.0</A></H1> <ul> <li>correct logic that processes <code>-class</code> option, so that a following <code>-e</code> option is handled (Debian #116297). <li>improve options-decoding to allow <code>-version</code> and <code>-help</code> options to be combined (Debian #110226). <li>add a 10 millisecond delay in event loop when processing <code>-hold</code> option, to avoid using too much CPU time (Debian #116213). <li>prefix final program execution in <code>uxterm</code> with "exec" to avoid a useless shell hanging around (Christian Weisgerber). </ul> <H1><A NAME="xterm_161">Patch #161 - 2001/10/10 - XFree86 4.1.0</A></H1> <ul> <li>modify logic that resets keypad application mode to avoid doing this if there is no modifier associated with the Num_Lock keysym (report by John E Davis <davis@space.mit.edu> and Alan W Irwin <irwin@beluga.phys.uvic.ca>). <li>add built-in translation for Control/KP_Separator to KP_Subtract, to accommodate users who wish to use xmodmap to reassign the top row of the numeric keypad. <li>correct Imakefile install-rule for <code>uxname</code> script (reported by Nam SungHyun <namsh@lge.com>). <li>resync with XFree86 CVS: correct typo in <code><ncurses/term.h></code> ifdef. </ul> <H1><A NAME="xterm_160">Patch #160 - 2001/10/7 - XFree86 4.1.0</A></H1> <ul> <li>modify logic in main.c (see <a href="#xterm_145">patch #145</a>) to avoid generating the same identifier, for example, for /dev/tty1 and /dev/pts/1, which is used to denote an entry in the utmp file (Debian bug report #84676), A similar fix was also sent by Jerome Borsboom <borsboom@westbrabant.net> in May, but I overlooked it when reviewing bug reports. <li>add configure check for <code><ncurses/term.h></code> to get rid of hardcoded <code>__CYGWIN__</code> ifdef in resize.c <p> NOTE: The CYGWIN port should not be linking <code>resize</code> with ncurses. It appears that the only reason it is, is because both the ncurses and termcap ports on that platform are badly misconfigured (essential pieces have been removed, etc). Checking for <code><ncurses/term.h></code> does not hurt anything, since there are some correct installations that are set up that way. <li>add a sample <code>uxterm</code> script, which uses the <code>UXTerm</code> application defaults for UTF-8 environments. <li>undo change to xterm application defaults, since this introduced an unnecessary incompatibility. The intended functionality was already addressed by the <a href="#xterm_141">UXTerm</a> app-defaults file. <li>resync with XFree86 CVS: <ul> <li>Modified xterm app default to use LFD fontnames instead of old type (Michael Schroeder). <li>Fix xterm when XIM is disabled - caused a segfault (Tomohiro Kubota). </ul> </ul> <H1><A NAME="xterm_159">Patch #159 - 2001/9/19 - XFree86 4.1.0</A></H1> <ul> <li>remove an ifdef for <code>USE_HANDSHAKE</code> added in patch #158 from the second <code>TIOCSSIZE</code> ioctl call in the initialization code. Paul Gilmartin reports that for Solaris 2.6 (sparc), stty does not show that xterm sets rows and columns unless the second ioctl is executed. <li>correct treatment of empty parameter list for some OSC strings (report by Sami Farin <sfarin@ratol.fi>). </ul> <H1><A NAME="xterm_158">Patch #158 - 2001/9/8 - XFree86 4.1.0</A></H1> <ul> <li>augment key translations for scrollbar widget to ensure that keystrokes intended for the text area are not lost if the mouse pointer happens to fall on the scrollbar. This can happen, for instance, if the user's <code>app-defaults</code> or <code>.Xdefaults</code> file contains a translations resource, though it may also happen through unrelated resource settings: probably a bug in libXt (reported by Paul Fox <pgf@foxharp.boston.ma.us> and Dmitry Yu. Bolkhovityanov <D.Yu.Bolkhovityanov@inp.nsk.su>). <li>widen ifdef's in xterm.h to define <code>__EXTENSIONS__</code> on Solaris, for compilers other than gcc. This was added along <code>_POSIX_C_SOURCE</code> with in <a href="#xterm_151">patch #151</a>, but is not sufficient since Sun's compiler does not define <code>__STDC__</code> by default (report by Matthias Scheler <tron@zhadum.de>). <li>modify xterm to obtain the closest matching color if an exact color is not available, e.g., on 8-bit displays (patch by Steve Wall) <li>patch by Tomohiro KUBOTA <tkubota@riken.go.jp> to implement "OverTheSpot" preedit type of XIM input: <ul> <li>This preedit type is a reasonable compromise between simpleness of implementation and usefulness. "Root" preedit type is easy to implement but not useful; "OnTheSpot" preedit type is the best in the point of view of user interface but very complex. And more, "OverTheSpot" is the preedit type which the most XIM servers support. Thus, to achieve reasonable usability, support of "OverTheSpot" preedit type is needed. <li>In "OverTheSpot" preedit type, the preedit (preconversion) string is displayed at the position of the cursor. On the other hand, it is XIM server's responsibility to display the preedit string. Thus, it is needed for XIM client (here XTerm) to inform the XIM server of the cursor position. And more, to achieve good visual proportion, preedit string must be written using proper font. Thus, it is XIM client's responsibility to inform the XIM server of the proper font. The font must be supplied by "fontset". Fontset is a set of fonts with charsets which are specified by the current locale. Since XTerm uses ISO10646 fonts regardless of the current locale, the fonts for XIM must be prepared separately. It is difficult to prepare fonts which are similar to XTerm font. Thus, my patch uses a simple way - the default font is "*" which matches every fonts and X library will automatically choose fonts with proper charsets. I added "-fx" command option and "ximFont" resource to override this default font setting. <li>changed the definition of "OverTheSpot" preedit type from XIMPreeditPosition|XIMStatusArea to XIMPreeditPosition|XIMStatusNothing. This matches the behavior of other programs such as Rxvt, Kterm, Gedit. <li>A tiny XIM bugfix is also included. By calling XSetLocaleModifiers() with parameter of "", it can consier XMODIFIERS environmental variable which is a standard way for users to specify XIM server to be used. </ul> <li>adjust configure script to accommodate repackaging of keysym2ucs.c as include-file for xutf8.c (patch by Tomohiro KUBOTA <kubota@debian.org>). <li>add the <code>UXTerm</code> app-defaults file to makefile install rules (request by Juliusz Chroboczek). <li>correct logic in <code>get_termcap()</code>, which returned false if the <code>tgetent()</code> call indicated that xterm was linked with terminfo. Although the <code>$TERMCAP</code> variable cannot be adjusted in this case, xterm still needs information from this call to extract data to initialize the erase-mode when the <code>ptyInitialErase</code> resource is false. <li>modify <code>ScrollbarReverseVideo()</code> function to cache the original border color, so it can restore that when an application flashes the screen (Bugzilla #38872). <li>resync with XFree86 CVS: <ul> <li>remove ifdef's for X_NOT_STDC_ENV (David Dawes). <li>add Cygwin to special errno handling case in ptydata.c (Alan Hourihane) <li>set screen size earlier in initialization, to address a race with window manager resizing its clients (Keith Packard). </ul> </ul> <H1><A NAME="xterm_157">Patch #157 - 2001/6/18 - XFree86 4.1.0</A></H1> <ul> <li>patch by Juliusz Chroboczek to clean up button.c and input.c. The basic idea is to use a single set of APIs in the XTerm core, and put a set of workarounds in a separate file. As you will notice, this drastically simplifies parts of the code; in particular, the only remaining ifdefs related to the differences between Xutf8 and legacy systems are related to the selection provider logic. This defines two new files, xutf8.h and xutf8.c, provide some half-hearted but fully portable emulation for the three Xutf8* functions that XTerm uses. Putting these in a separate file will allow people to experiment with more complex versions without making the core of XTerm more difficult to maintain. The functionality of the emulation is as follows. <ul> <li>Xutf8TextListToTextProperty fully handles XStringstyle and XUTF8StringStyle. It will only generate STRING for XStdICCTextStyle, and wil only generate Latin-1 in XCompoundTextStyle (but label it as COMPOUND_TEXT, as the spec requires). (I have hesitated to make this function fail for XStdICCTextStyle and XCompoundTextStyle; this might be a smart thing to do, in the hope that the selection requestor will try UTF8_STRING afterwards; opinions?) <li>Xutf8TextPropertyToTextList fully handles STRING and UTF8_STRING. It systematically fails for COMPOUND_TEXT. <li>Xutf8LookupString will properly handle single-keystroke input for the keysyms covered by Markus' keysym2ucs function. It will not handle either compose key input or external input methods. </ul> <li>add an ifdef for <code>SunXK_F36</code>, used in <code>xtermcapKeycode()</code> (patch by Mark Waggoner <waggoner@ichips.intel.com>). <li>modify check for login name to try <code>getlogin()</code> and $LOGNAME, $USER environment variables to detect if the user has logged in under an alias, i.e., an account with the same user id but a different name (Debian bug report #70084). <li>add resource <code>tiXtraScroll</code>, which can be used to preserve the screen contents in the scrollback rather than erasing it when starting a fullscreen application such as <code>vi</code> (patch by Ken Martin <fletcher@catsreach.org>). <li>two patches by Denis Zaitsev <zzz@cd-club.ru>: <ul> <li>added <code>forceBoxChars</code> resource to control the "line-drawing characters" option. <li>added <code>freeBoldBox</code> resource, which, when set true, suppresses check in <code>same_font_size()</code>, so xterm does not attempt to ensure that the bold font is the same size as the normal font. </ul> <li>change the color class for ANSI colors and similar ones such as bold-color, etc., to follow the convention that the classname is the instance name with a leading capital (e.g., <code>color0</code> and <code>Color0</code> rather than <code>color0</code> and <code>Foreground</code>). There was little use for Foreground as a class other than to create occasional confusion and bug reports, most recently by Nelson Beebe who reports that it disables colors in xterm but not on Linux, which is probably due to a difference in resource evaluation order. A configure script option (--disable-color-class) is provided for anyone who did use the older behavior. <li>fix a signal-handling bug. When running xterm with <code>ksh</code> or similar shell such as bash 2.05, xterm will hang and not respond to keystrokes after the user types <code>suspend</code>. Additionally the popup menus do not respond, so it is not possible to send SIGCONT to the shell. What is happening is that the shell is sending itself SIGSTOP, and it is being stopped. Per specification it also means that the operating system is sending SIGCHLD to parent to the bash (XTERM). Now the issue is that xterm assumes it cannot happen and it expects to receive SIGCHLD only upon <em>termination</em> of its children. This causes a deadlock with xterm waiting for the child to die, and the child waiting for SIGCONT. (report/patch by Adam Sulmicki), analysis/testing by Sven Mascheck <sven.mascheck@student.uni-ulm.de>). <li>correct some inconsistent checks for <code>XtReleaseGC()</code> calls in <code>xtermLoadFont()</code> (patch by Nam SungHyun <namsh@lge.com>). <li>updated wcwidth.c and keysym2ucs.c to versions dated 2001/1/12 and 2001/4/18, respectively from http://www.cl.cam.ac.uk/~mgk25/ucs/ <li>correction to change from <a href="#xterm_90">patch #90</a>, which was intended to reset the saved cursor position for normal/alternate screens on a soft reset, but actually wiped out all of the saved cursor information. Just reset the saved position for the current screen (report by Michael Schroeder). <li>modify ShowCursor() and HideCursor() so that if the cursor points to the second part of a wide character, make the show/hide operate on the first position of the wide character (patch by Sven Verdoolaege). <li>scrolling in the alternate screen just before switching back to the main screen can cause extra blank lines to be inserted into the scrollback buffer (patch by Paul Vojta <vojta@math.berkeley.edu>). <li>resync with XFree86 4.1.0: <ul> <li>Use TermcapLibrary as -lncurses instead of -ltermcap, fixes problem building xterm/resize on Cygwin/XFree86 (Harold Hunt). <li>Install xterm.termcap and xterm.terminfo when installing xterm (Torrey T. Lyons). <li>Fix some build issues on Cygwin/XFree86 (Suhaib Siddiqi). <li>Define CBAUD, when it's missing in xterm, on LynxOS (Stuart Lissaman). </ul> </ul> <H1><A NAME="xterm_156">Patch #156 - 2001/4/28 - XFree86 4.0.3</A></H1> <ul> <li>change order of selection-target types to make 8-bit xterm prefer UTF8_STRING to COMPOUND_TEXT (patch by Juliusz Chroboczek). <li>document <code>-fa</code>, <code>-fs</code> command-line options and <code>faceName</code>, <code>faceSize</code> resources which are used by the freetype library support. <li>if configure script finds freetype libraries, but imake definitions do not have the XRENDERFONT definition, define it anyway. <li>modify configure script check for freetype libraries to include <code><Xlib.h></code>, since an older version of the related headers relies on this (patch by Adam Sulmicki). </ul> <H1><A NAME="xterm_155">Patch #155 - 2001/4/20 - XFree86 4.0.3</A></H1> <ul> <li>correct return type of in_put() from <a href="#xterm_155">patch #153</a> changes, which left it not wide enough for UTF-8 (patch by Bruno Haible). </ul> <H1><A NAME="xterm_154">Patch #154 - 2001/4/11 - XFree86 4.0.3</A></H1> <ul> <li>undo check for return value from <code>pututline</code> (used for debugging) since that function does not return a value on Slackware 3.6. <li>correct length in ScreenWrite, when rendering invisible text (patch by Sven Verdoolaege <skimo@kotnet.org>). <li>fixes/improvements for the <code>i18nSelection</code> resource from patch #153, by Bruno Haible: <ul> <li>add missing initialization for <code>i18nSelection</code> resource. <li>split-out the non-ICCM aspect of the <code>i18nSelection</code> resource as a new resource, <code>brokenSelections</code>. </ul> <li>add configure check for <code><time.h></code> and <code><sys/time.h></code>, to allow for Unixware 7, which requires both. If the configure script is not used, only <code><time.h></code> will be included as before (report by Thanh Ma). <li>fix redefinition of <code>dup2</code>, <code>getutent</code>, <code>getutid</code>, <code>getutline</code> and <code>sleep</code> functions on Unixware 7 (report by Thanh Ma <Thanh.Ma@casi-rusco.com>) <li>add a fall-back definition for <code>__hpux</code>, which is apparently not defined in some compilers on HPUX 11.0 (reported by Clint Olsen). <li>change VAL_INITIAL_ERASE, which is used as a fallback for the <code>"kb"</code> termcap string to 8, since that matches the xterm terminal description (request by Alexander V Lukyanov). <li>correct an off-by-one in <code>ClearInLine</code>, which caused the erase-characters (ECH) control to display incorrectly (patch by Alexander V Lukyanov). <li>correct escape sequences shown in terminfo for shifted editing keys. The modifier code was for the control key rather than the shift key. </ul> <H1><A NAME="xterm_153">Patch #153 - 2001/3/29 - XFree86 4.0.3</A></H1> <ul> <li>increase PTYCHARLEN to 8 for os390, add some debugging traces for UTMP functions (patch by Paul Gilmartin). <li>correct an misplaced brace in <code>SelectionReceived()</code> (patch by Bruno Haible). <li>correct an assignment dropped in <code>SelectionReceived()</code> which made it not compile for wide-characters combined with debug traces. <li>correct typo, clarify description of 88- and 256-color controls (report by Bram Moolenaar). <li>correct a typo in ctlseqs.ms which caused DEC Locator control sequences using single quote "'" display grave "`" instead (reported by Paul Williams, apparently in patch #114). </ul> <H1><A NAME="xterm_152">Patch #152 - 2001/3/13 - XFree86 4.0.2</A></H1> <ul> <li>correct index in inner loop in <code>VTInitI18N()</code> from patch #151 changes, which resulted in infinite loop under some conditions (report/analysis by Paul Gilmartin). <li>remove spurious "%|" from terminfo sgr capabilities (report/analysis by Adam M Costello, Debian bug #89222). <li>add shell script to adjust list of dynamic libraries linked by <code>resize</code> when building with the standalone configure script. Otherwise it uses the same list as for xterm, which is excessive. <li>fix a few compiler warnings reported by the 20010305 gcc snapshot. </ul> <H1><A NAME="xterm_151">Patch #151 - 2001/3/10 - XFree86 4.0.2</A></H1> <ul> <li>patch from Juliusz Chroboczek <jch@pps.jussieu.fr> which alters the behaviour of selections in XTerm. It is believed to follow the ICCCM + UTF8_STRING to the letter, both in UTF-8 and in eight-bit mode. From his description: <ul> <li>When compiled against XFree86 4.0.2, the patched XTerm will make the selection available as COMPOUND_TEXT, STRING or UTF8_STRING in both modes. It will request selections in the following order: <p> UTF-8 mode: UTF8_STRING, TEXT, COMPOUND_TEXT, STRING.<br> eight-bit mode: TEXT, COMPOUND_TEXT, UTF8_STRING, STRING. <li>When compiled against an earlier version of XFree86 (or compiled with OPT_UTF8_API=0), it will still obey the ICCCM, but will neither request nor provide UTF8_STRING in eight-bit mode, and neither TEXT nor COMPOUND_TEXT in UTF-8 mode. <li>For compatibility with previous versions of XTerm, a resource <code>i18nSelections</code> is provided, please see the manpage for details. However, due to an unexpected combination of ICCCM extensions by various bits and pieces of the libraries, interacting with previous versions of XTerm will work in many locales even without this flag. (Please do not set this resource to true by default, as this would violate the ICCCM.) </ul> <li>improved error checking/reporting in VTInitI18N(), ensuring that lack of input method styles is treated distinctly from a mismatch. <li>remove an incorrect ifdef from patch #141 which suppressed overstriking to simulate bold font when xterm was compiled to support wide characters (report/analysis by Adam M Costello <amc@cs.berkeley.edu>, fixes Debian bugs #76404, #77575). <li>modify <code>RequestResize()</code> function to save/restore window manager hints. Its call to <code>XtMakeResizeRequest()</code> had the undesirable side-effect of clearing window manager hints, e.g., when switching to 132-columns via DECCOLM escape sequence. Window manager hints make it simple to resize xterm in terms of character cells rather than pixels (reported by Christian Weisgerber as well as Debian bug #79939). <p> This applies to the normal configuration. When built with toolbar support, the hints are applied to a different widget level (more work will be needed to make hints work with the toolbar). <li>fix a redefinition warning for resize.c on OpenBSD (patch by Christian Weisgerber). <li>change resource corresponding to <code>-T</code> option to match Xt library's <code>-title</code>, i.e., <code>.title</code> rather than <code>*title</code> so the command-line options are interchangeable as documented (Debian bug report #68843). <li>add script used from autoconf'd makefile for installing manpages, since recent XFree86 changing the way section numbers are represented makes the install dependent on extra scripts. <li>add configure check for freetype libraries and configure option --disable-freetype to override this feature. <li>modify some configure script macros to avoid using changequote(), which has been rendered useless in the latest autoconf alpha 2.49c <li>update config.guess, config.sub to 2001-2-13 <li>remove redundant/contradictory __CYGWIN__ definitions from resize.c <li>correct manpage typo introduced by X11R6.5 resync. </ul> Changes from XFree86 4.0.2: <ul> <li>add definition of <code>_POSIX_C_SOURCE</code> for Solaris to make this compile with <code>gcc -ansi -pedantic</code> (report by <mark@zang.com>. </ul> <H1><A NAME="xterm_150">Patch #150 - 2000/12/29 - XFree86 4.0.2</A></H1> <ul> <li>move the binding for shifted keypad plus/minus, which invokes the <code>larger-vt-font()</code> and <code>smaller-vt-font()</code> actions, respectively, into the translations resource (suggested by Marius Gedminas <mgedmin@puni.osf.lt>). <li>modify configure script to support the <code>--program-prefix</code>, <code>--program-suffix</code> and <code>--program-transform-name</code> options (request by Alison Winters <alison@mirrabooka.com>). <li>patch from Robert Brady <ul> <li>fix a scrolling / combining characters display anomaly <li>fix a problem with double-width characters where if the primary font had no box-drawing characters, the right hand half of double-width characters was erased (reported by Yao Zhang <yzhang@sharemedia.com>). <li>fix special case of null byte for key handling in UTF-8 locales. </ul> <li>modify logic that compares sizes of normal and bold fonts to be more forgiving of the font server's choice of bold font which must match the normal font's size. Now <code>same_font_size()</code> compares the height of the fonts rather than individually ascent and descent, and allows the bold font to be one pixel smaller than the normal font (addresses a report by Alan Citterman <alan@mticket.com>, who says that something in patches #146 to #148 made xterm more likely to overstrike bold fonts, and indirectly Debian bug report #76404, which reports the opposite). <li>make configure script use $CFLAGS and $CPPFLAGS consistently, including removing a chunk from configure.in which attempted to save/restore $CPPFLAGS while processing value set by the --x-includes option, but lost values set in an intervening AC_CHECK_HEADERS. This change modifies macros CF_ADD_CFLAGS, CF_ANSI_CC_CHECK and CF_X_TOOLKIT, as well as removing variables IMAKE_CFLAGS and X_CFLAGS from the generated makefile (the AC_CHECK_HEADERS problem was reported by Albert Chin-A-Young <china@thewrittenword.com<). <li>correct a comparison in SELECTWORD case of ComputeSelect(), which resulted in a word-selection wrapping past the first column without checking the first column's character class (reported by Christian Lacunza <celacunza@netscape.net> <li>correct a logic in UTF-8 mode for selecting double-width characters; a combining character was omitted (patch by Markus Kuhn). <li>add feature to pop (raise) window when a bell is received (patch by Gael Roualland <gael.roualland@dial.oleane.com>). <li>add __NetBSD__ and __OpenBSD__ to special-case in xterm_io.h for USE_POSIX_TERMIOS definition (patch by Christian Weisgerber). <li>move special-case HPUX include for <sys/bsdtty.h> to xterm_io.h to define TIOCSLTC, making HAS_LTCHARS defined for HPUX 10.20 (report by Bruno Betro). </ul> <H1><A NAME="xterm_149">Patch #149 - 2000/12/6 - XFree86 4.0.1h</A></H1> <ul> <li>restructured includes for <code>termios.h</code>, <code>termio.h</code> and related definitions for main.c, os2main.c, screen.c and resize.c so they will share equivalent definitions in a new header <code>xterm_io.h</code>. This is intended to solve some problems mainly for HPUX which appear to arise from inconsistent definitions for SIGWINCH- and HAS_LTCHARS-related symbols (reports by Bruno Betro, Jeremie Petit and Clint Olsen). <li>improve usability of double-width fonts by allowing normal fonts to be given as double-width (from a patch by Fabrice Bellard <bellard@email.enst.fr>). <li>correct a few compiler warnings in TRACE() macros for signed/unsigned variable differences (reported by Clint Olsen). <li>make configure script use $CFLAGS and $CPPFLAGS more consistently, i.e., by using CF_ADD_CFLAGS in CF_ANSI_CC macro. <li>expanded description of environment variables in manual-page. <li>modify OPT_TCAP_QUERY feature to always return the termcap or terminfo capability string in the response, and to read/write the names in hexadecimal form to allow for the special case of termcap's <code>k;</code> name (patch by Bram Moolenaar). <li>add OPT_SAME_NAME and OPT_TCAP_QUERY to xtermcfg.hin, so the corresponding configure options work (patch by Bram Moolenaar). <li>resync with XFree86 4.0.1g: <ul> <li>Rewrite Xft library for Render extension/core text and font management Change xterm to use new interface (Keith Packard). </ul> </ul> <H1><A NAME="xterm_148">Patch #148 - 2000/10/31 - XFree86 4.0.1d</A></H1> <ul> <li>document logfile options in man-page. <li>correct spelling of <code>-samename</code> option in help message. <li>add configure script option <code>--enable-tcap-query</code> (request by Bram Moolenaar). <li>patch by Bram Moolenaar to add a "Co" or "colors" entry to the OPT_TCAP_QUERY feature. <li>patch by Kiyokazu SUTO <suto@ks-and-ks.ne.jp>: <ul> <li>add support for bold font for double width characters. The font name may be specified with the command line option <code>-fwb</code> or with resource <code>wideBoldFont</code> (class <code>WideBoldFont</code>). <li>correct underlining of double width character string, which was drawn only half width. <li>correct binary search of precomposed character table, which may return wrong result when <code>int</code> is just 32 bits. </ul> <li>some changes to align terminfo with ncurses 5.2: <ul> <li>remove xtermm description, retaining xterm-mono since the former conflicts with ncurses. <li>modify initialization and reset strings to avoid putting the save/restore cursor operations bracketing changes to video attributes, since the changes could be lost when the cursor is restored. This affects xterm-r6 and xterm-8bit (the xterm-xfree86 entry uses the soft-reset feature which resets scrolling margins and origin mode without requiring us to save/restore the cursor position). <li>make a few entries explicitly inherit from xterm-xfree86 rather than xterm: xterm-rep, xterm-xmc, xterm-nrc </ul> <li>ensure that sign-extension does not affect <code>ctype</code> macros by using <code>CharOf()</code> macro to coerce the parameter to an unsigned char. <li>resync with XFree86 4.0.1d: <ul> <li>Add primitive support in xterm for Xft based fonts (Keith Packard). The changes are ifdef'd with <code>-DXRENDERFONT</code>. </ul> </ul> <H1><A NAME="xterm_147">Patch #147 - 2000/10/26 - XFree86 4.0.1c</A></H1> <ul> <li>correct implementation of <code>ptyInitialErase</code>: the value assigned to <code>initial_erase</code> was for the control terminal, which is correct as far as it goes. But there was no following test for the pseudo-terminal's erase value, which would overwrite the default obtained from the control terminal (reported by Christian Weisgerber <naddy@mips.inka.de>). <li>modify check for printable-characters in OSC string to use xterm's ansi_table rather than isprint() macro, to isolate this check from locale settings. This fixes a problem using 8-bit characters to set the title (reported by Ricardas Cepas <rch@richard.eu.org>). <li>modify sample scripts to check for printf before print, since the latter is not as well standardized (e.g., on Linux). <li>updated config.sub, config.guess to reflect changes on subversions.gnu.org </ul> <H1><A NAME="xterm_146">Patch #146 - 2000/9/12 - XFree86 4.0.1c</A></H1> <ul> <li>correct two instances overlooked from patch #141 which assumed UTF-8 mode without checking, causing a core dump in non-UTF-8 mode (one instance was reported by Tommi Virtanen <tv@debian.org>). <li>correct a problem selecting from the scrollback buffer in UTF-8 mode by changing remaining getXtermCell() calls to XTERM_CELL() as in the non-UTF-8 cases (report by Markus Kuhn, patch by Robert Brady). </ul> <H1><A NAME="xterm_145">Patch #145 - 2000/9/11 - XFree86 4.0.1c</A></H1> <ul> <li>several changes from Robert Brady for UTF-8 configuration: <ul> <li>doublewide characters don't lose their accents when the cursor moves onto or from them (a visual bug) <li>fix logic in addXtermCombining, which mean that if the low byte of a cell's first combining char was 0, a following combining char would go into combining slot 1, not 2. <li>modify logic for cut-buffers so UTF-8 data is first converted to Latin1. <li>collapse surrogates, 0xfffe, 0xffff to UCS_REPL. <li>modify to allow xterm to to show combining characters attached to doublewidth characters. <li>correct bug in linewrap with -u8 option (reported by Andreas Koenig <andreas.koenig@anima.de>). </ul> <li>several changes to PTY logic (based on request by Tim Ryan <timryan@nortelnetworks.com>). <ul> <li>modify treatment of <code>-S</code> option to to make it work with Unix98 PTY's. <li>restore sense of IsPts flag in <code>get_pty()</code>, which was lost in Unix98 changes. <li>use new functions <code>my_pty_id()</code> and <code>my_pty_name()</code> to simplify/fix strings used for utmp, wtmp identifiers. <li>simplify <code>get_pty()</code> function, making it have a single return point so its inputs/outputs can be identified. </ul> <li>update config.guess and config.sub and scripts to my 20000819 patch, adding cases for OS/2 EMX. <li>add special case for os390 compiler options to configure script (patch by Paul Gilmartin) <li>fix some unused-variable compiler warnings (reported by Zdenek Sekera). <li>split-out some string functions into xstrings.c, to use them more consistently among main.c, os2main.c and resize.c <li>align termcap/terminfo files, adding entries to make them match. The termcap entries are necessarily less complete than the terminfo, to fit within 1023 character per entry. <li>add terminfo entry for xterm-sco (SCO function keys). <li>modify <code>same_font_name()</code> to properly handle wildcard introduced in <code>bold_font_name()</code>, making comparison for different fonts succeed when only the normal font is specified. This is needed to decide if 1-pixel offset should be used. (reported in a newsgroup by Bart Oldeman <enbeo@enbeo.resnet.bris.ac.uk>) <li>correct preprocessor line for OPT_WIDE_CHARS in drawXtermText() from patch #141 which resulted in overstriking for bold fonts not working. <li>correct Imakefile from 4.0.1c resync so UTF-8 modules are in UTF8SRC, UTF8OBJ lists, allowing build without UTF-8 support. </ul> <H1><A NAME="xterm_144">Patch #144 - 2000/8/23 - XFree86 4.0.1b</A></H1> <ul> <li>remove a spurious assignment in ScreenWrite() from Robert Brady's patch which set a null at the "end" of the buffer to be written. That made the autowrap feature write a blank in the first column for the non-UTF-8 configuration, rather than the actual character (reported by Alan Citterman <alan@mticket.com>). </ul> <H1><A NAME="xterm_143">Patch #143 - 2000/8/19 - XFree86 4.0.1b</A></H1> <ul> <li>add a check to ensure that <code>-class</code> command-line option is not confused with <code>-c</code> (reported by Paul Townsend <aab@aab.cc.purdue.edu>). </ul> <H1><A NAME="xterm_142">Patch #142 - 2000/8/18 - XFree86 4.0.1b</A></H1> <ul> <li>correction to precompose scripts, so 0061 + 0300 will now be really be displayed as 00C0 (patch by Robert Brady <robert@susu.org.uk>). <li>correct macro ClassSelects() in button.c, used to hide ifdef's for OPT_WIDE_CHARS in patch #141 (reported by Andreas Paul <paula@informatik.tu-muenchen.de>). <li>change wcwidth.h to include stddef.h rather than wchar.h, which is not present on OpenBSD and FreeBSD (reported by Christian Weisgerber and Bram Moolenaar). <li>newer config.sub and config.guess, from lynx 2.8.4dev.7 </ul> <H1><A NAME="xterm_141">Patch #141 - 2000/8/14 - XFree86 4.0.1b</A></H1> <ul> <li>Most of this patch is an integration of Robert Brady's patch #11 for doublewidth and combining characters, from http://www.ecs.soton.ac.uk/~rwb197/xterm/. In this context, doublewidth refers to 16-bit character sets which may have glyphs occupying two cells. <li>add command-line option <code>-class</code>, which allows one to override xterm's resource class. Also add resource file <code>UXTerm.ad</code>, which simplifies using xterm for both 8-bit character sets and UTF-8. <li>fixes/improvements to OPT_TCAP_QUERY logic (patches by Bram Moolenaar, Steve Wall). </ul> <H1><A NAME="xterm_140">Patch #140 - 2000/7/23 - XFree86 4.0.1</A></H1> <ul> <li>modify Makefile.in to circumvent GNU make's built-in suffix rule for ".sh" which confuses install.sh with the "make install" target (report/patch by Paul Gilmartin). <li>implement an experimental control sequence which an application may use to query the terminal to determine what sequence of characters it would send for a given function key. This is ifdef'd with OPT_TCAP_QUERY (request by Bram Moolenaar). <li>add /usr/local to search path in CF_X_ATHENA configure macro to build with Xaw3d on OpenBSD (patch by Christian Weisgerber). <li>add missing <code>#undef HAVE_TERMIO_C_ISPEED</code> to xtermcfg.hin, omitted in patch #133 fix for IRIX 6.5 baudrate (report by Alain Filbois <Alain.Filbois@loria.fr>). <li>correct a few errors in xterm.man: font in filename example for Tektronix emulation, and description of -nul/+nul command-line options (report by Eric Fischer <enf@pobox.com>). <li>update config.guess and config.sub (from tin and lynx) </ul> <H1><A NAME="xterm_139">Patch #139 - 2000/6/17 - XFree86 4.0d</A></H1> <ul> <li>back out change to <code>-name</code> command-line option, restoring its original behavior (as noted by David Madore, the correct interpretation of this option is the application instance rather than the application class). </ul> <H1><A NAME="xterm_138">Patch #138 - 2000/6/15 - XFree86 4.0c</A></H1> <ul> <li>workaround for fixed fonts which are generated from Unicode fonts: they omit glyphs for some xterm's less-used line-drawing characters, which caused xterm to set a flag telling it to use only its internal line-drawing characters. Do not set the flag (it can be set from the popup menu), and xterm will generate only the line-drawing glyphs which actually are missing. <br> Otherwise, when used for large fonts, xterm may generate a 2-pixel wide line, which can leave dots on the screen. <li>restore first line of 256colres.pl, omitted in 4.0c diffs. </ul> <H1><A NAME="xterm_137">Patch #137 - 2000/6/10 - XFree86 4.0b</A></H1> <ul> <li>make command-line <code>-name</code> option work as documented. Apparently this was lost in X11R5 when coding to use <code>XtAppInitialize</code>. <li>limit numeric parameters of control sequences to 65535 to simplify checks for numeric overflow. <li>change index into UDK list to unsigned to guard against numeric overflow making the index negative (Taneli Huuskonen <huuskone@cc.helsinki.fi>). <li>change <code>sun function-keys</code> resource name to <code>sunFunctionKeys</code> to work around redefinition of the token <code>sun</code> by xrdb on Solaris. Similarly, renamed resource <code>sun keyboard</code> to <code>sunKeyboard</code> (Steve Wall). <li>change similar resource names for HP and SCO to avoid potential conflict with xrdb symbols on other systems, as well as for consistency. <li>reorganized the install targets in the autoconf'd Makefile, adding install-app, install-bin, install-dirs and install-man. The app-defaults class can be overridden by setting the make variable 'CLASS', simplifying customization of xterm as a Unicode terminal, e.g., CLASS=UXTerm. <li>add limit checks to <code>ClearInLine()</code>, <code>ScrnInsertChar()</code>, <code>ScrnDeleteChar()</code> to correct potential out-of-bounds indexing (prompted by Debian bug report #64713, which reported a problem with ICH escape sequences). <li>updates to config.sub and config.guess Kevin Buettner <kev@primenet.com> for elf64_ia64 Bernd Kuemmerlen <bkuemmer@mevis.de> and MacOS X. <li>patch from Paul Gilmartin for os390 to check for errno set to ENODEV on failure to open /dev/tty when there is no controlling terminal. <li>patch from H Merijn Brand <h.m.brand@hccnet.nl> for building on Digital Unix 4.0 and AIX 4.2. <li>modify DECRQSS reply for DECSCL to additionally report if the terminal is set for 8-bit controls. </ul> <H1><A NAME="xterm_136">Patch #136 - 2000/6/3 - XFree86 4.0b</A></H1> <ul> <li>add a resource (<code>limitResize</code>) limiting resizing via the CSI 4 t and CSI 8 t sequences. <li>ignore out-of-bounds resize requests, i.e., where sign-extension or truncation of the parameters would occur. </ul> <H1><A NAME="xterm_135">Patch #135 - 2000/5/29 - XFree86 4.0b</A></H1> <ul> <li>remove code introduced in #134 which made some backgrounds bold. <li>minor correction to format of updated $TERMCAP when adding <code>kb</code> capability for <code>ptyInitialErase</code> logic. <li>improved test for SVR4 definition. </ul> <H1><A NAME="xterm_134">Patch #134 - 2000/5/28 - XFree86 4.0b</A></H1> <ul> <li>update URL's and mailing addresses, moved to http://dickey.his.com and dickey@herndon4.his.com <li>correct missing quotes in CF_TTY_GROUP configure script macro in case the script is run in batch mode. <li>modify ownership-check of log file to ignore the group ownership. Otherwise xterm cannot create logfiles in directories with set-gid permissions. <li>simplify the logic that reads termcap data. <li>add fallback definition for B9600 in case line speed definition for 38400 is missing (report by Jack J Woehr <jwoehr@ibm.net>, for OpenBSD 2.6). <li>fix: Set highlightColor, and select a region containing the text cursor. If the window loses focus, the cursor becomes hollow, with the region inside the cursor being background/foreground, unlike the rest of the selection, which is foreground/highlight (patch by Ross Paterson <ross@soi.city.ac.uk>). <li>add configure script tests to define SVR4, SYSV and USE_POSIX_WAIT, which enables xterm to compile on Solaris 7 and SCO Openserver without imake, though there are still a few features for the latter which require <code>sco</code> to be predefined. <li>patches from Steve Wall: <ul> <li>add support for two Sun-specific function keys. These keys are labeled F11 and F12 on Sun Type 5 keyboards, but return SunXK_F36 and SunXK_F37. Support will only be compiled in if the header file <X11/Sunkeysym.h> exists and contains the appropriate symbol definitions. The keycodes for the DEC keycodes were arbitrary unused codes, but the ones for the Sun keycodes are what cmdtool and shelltool actually send. <li>add <code>colorRV</code> and <code>colorRVMode</code> resources to allow specifying a color to use for reverse video, similar to the existing UL, BD, and BL modes. <li>add <code>alwaysUseMods</code> resource, to override check if <code>alt</code> or <code>meta</code> modifiers are used in <code>translations</code> resource. Revamped the code to calculate the modifier value, and included Meta if alwaysUseMods is TRUE, using values 9-16. </ul> <li>patches from Paul Gilmartin for os390: <ul> <li>regularize the definition of CONTROL() and remove an acknowledged "trial and error" table. <li>translate "^?" into A2E(0177) which is the EBCDIC "DEL" rather than plain 0177 which is the EBCDIC quotation mark. <li>modify <code>xtermMissingChar()</code> so that EBCDIC codes 128-159 are not rendered as blanks by X server running on Solaris, which sees those as control characters. <li>make debugging traces (configure --enable-trace) work properly with EBCDIC. </ul> </ul> <H1><A NAME="xterm_133">Patch #133 - 2000/5/2 - XFree86 4.0a</A></H1> <ul> <li>add substitutions in autoconf'd Makefile for CPPFLAGS, LDFLAGS and AWK (reported by Neil Bird). <li>correct uninitialized <code>childstat</code> variable from patch #131 in <code>creat_as()</code> function, which caused logging to not work on Solaris, whose <code>waitpid()</code> function does not initialize its parameter. Add check for EINTR on return from <code>waitpid()</code> as well (reported by Neil Bird <neil.bird@rdel.co.uk>). <li>remove a redundant check for working <code>setuid()</code> function introduced in patch #132 (Greg Smith reports that this does not work as intended on os390). <li>change line speed from 9600bd to 38400bd, to accommodate people who mistakenly use $TERM set to <em>vt100</em>, to reduce the effect of padding associated with this terminal type. <li>add configure script check for IRIX 6.5's redefinition of baud rates associated with <code>struct termio</code>, to correct a situation where the baud rate was initialized to zero (reported by Andrew Isaacson <adi@lcse.umn.edu>). <li>remove unused configure script check for VDISABLE. </ul> <H1><A NAME="xterm_132">Patch #132 - 2000/4/11 - XFree86 4.0a</A></H1> <ul> <li>undo an incorrect change from patch #113 caused the right scrollbar to be positioned incorrectly when re-enabling it (analysis by D Roland Walker). <li>add ctrlFKeys resource, replacing constant for adjusting control-F1 to control-F12 to VT220-style F10-F20. The resource changes the constant 12 to a default value of 10 (request by Jim Knoble <jmknoble@pobox.com>). <li>correct ifdef'ing for conflict between definitions in AIX's <sys/select.h> and <X11/XPoll.h> (reported by Clint Olsen). <li>add checks for return-values of getutid(), initgroups() and setuid() in main.c, as well as modifying ifdef's for __osf__ to include tty-group and WTMP logic (adapted from patch by Paul Szabo <psz@maths.usyd.edu.au>) <li>modify resize.c to build and work on os390 (uses EBCDIC) (adapted from patch by Phil Sidler <Phil.Sidler@airborne.com>) <li>use Ires(), Bres() and Sres() macros to simplify resource list in charproc.c <li>resync with XFree86 4.0a: <ul> <li>correct a typo in os2main.c (Holger Veit, from 4.0a). </ul> </ul> <H1><A NAME="xterm_131">Patch #131 - 2000/3/3 - XFree86 3.9.18b</A></H1> <ul> <li>integrate patch by Branden Robinson for improving logfile security: <ul> <li>make the <code>creat_as()</code> function more strict by using O_EXCL rather than O_APPEND. <li>fixes to make DEBUG ifdef's compile/run, including making the debug logfile more unique by appending a timestamp to its name. <li>include <term.h> in resize.c, to fix a missing-prototype warning. </ul> <li>modified <code>creat_as()</code> a little more, retaining the ability to append to a logfile If the user specifies the name. Also, check if the opened file (which patch #130 ensures is owned by the effective user) is not writable by other users. <li>use <code>creat_as()</code> logic to make tek4014 screen-copy more secure (noted by Branden Robinson). <li>ifdef'd some of Branden's changes to build/work on older machines. <li>correct missing initialization of the <code>.mode</code> flag in <code>ColorRes</code> struct, from patch #129. This worked on Linux because <code>malloc()</code> zeroes memory on that platform (reported by Christian Weisgerber). <li>modify logic for <code>deleteIsDEL</code> resource so it has internally 3 states: unspecified, true and false. If unspecified, the keyboard type determines whether the Delete key transmits <code><esc>[3~</code> or <code>\177</code>, and the popup menu entry reflects the internal state. Otherwise, the popup menu entry overrides the keyboard type (suggested by Dr Werner Fink, to make it simpler to set resources that imitate the legacy X11R6 xterm). </ul> <H1><A NAME="xterm_130">Patch #130 - 2000/3/1 - XFree86 3.9.18a</A></H1> <ul> <li>modify <code>scroll-forw()</code> and <code>scroll-back()</code> actions, adding a third parameter which will direct xterm to ignore the action when mouse reporting is enabled. This is needed for the wheel mouse to be used to report to the application rather than scroll the window. <li>add menu entry and action to allow disabling xterm's assumption that the current font contains line-drawing characters if the font cells 1-31 are nonempty. Some fonts may have other characters (reported by Bruno Betro <bruno@iami.mi.cnr.it>). <li>add a check in <code>creat_as()</code> to ensure that the user really owns the logfile that has been opened. <li>add logic to implement SCO function-keys. (This is really incomplete, since I intend to revisit this and make xterm able to emulate scoansi better than just the function-keys). <li>add configure script option --enable-sco-fkeys, minor related fixes (patch by Dr Werner Fink). <li>fix typos in ctlseqs.ms (reported by Bram Moolenaar) <li>fix typo in sinstall.sh default for $TST_PROG (reported by Paul Gilmartin <pg@sweng.stortek.com>) </ul> <H1><A NAME="xterm_129">Patch #129 - 2000/2/26 - XFree86 3.9.18a</A></H1> <ul> <li>improve initialization of ANSI colors by delaying allocation until each color is first used. <li>remove ifdef that prevented colorBD/colorUL/colorBL resources from working when 256-color configuration was built (reported by Todd Larason). <li>fix some minor inconsistencies in terminfo (Debian #58530). </ul> <H1><A NAME="xterm_128">Patch #128 - 2000/2/17 - XFree86 3.9.18</A></H1> <ul> <li>correct logic for <code>oldXtermFKeys</code> resource, fixes a core dump when attempting to set it from the command-line (reported by Dr Werner Fink). <li>correct ifdef for meta-sends-escap so configure --disable-num-lock builds. </ul> <H1><A NAME="xterm_127">Patch #127 - 2000/2/12 - XFree86 3.9.17e</A></H1> <ul> <li>add resource, popup menu entry and control sequence to allow changing the Delete key to send either DEL or the VT220-style Remove escape sequence. <li>remove logic for metaSendsEscape that would allow xterm to send <code><esc>[3~</code> before a function key that would begin with <code><esc>[3~</code> (request by Christian Weisgerber). <li>add missing action and documentation for meta-sends-escape. <li>correct a few typos in ctlseqs.ms (incorrect code for Cyan color) </ul> <H1><A NAME="xterm_126">Patch #126 - 2000/2/8 - XFree86 3.9.17c</A></H1> <ul> <li>patch by Markus Kuhn: ensure that xterm will automatically activate the UTF-8 mode whenever the name of the locale environment variable suggests that a UTF-8 locale is in use. This will help that by simply setting LC_CTYPE an entire system can be switched over to UTF-8, without users having to remember the UTF-8 command line options ("-u8", etc.) of the various applications. Command line options and X resource entries can still be used to override this default choice. <li>add old function-keys control sequences and popup menu entry, for compatibility with legacy X11R6 xterm. <li>revert translation of editing keypad "Delete" key to legacy \177. <li>simplify the color-resource data expressions with macro COLOR_RES, for later use in restructuring color initialization. <li>change encoding of wheel mouse (buttons 4 and 5) to avoid conflict with legacy mouse modifiers (suggested by Bram Moolenaar). </ul> <H1><A NAME="xterm_125">Patch #125 - 2000/1/31 - XFree86 3.9.17c</A></H1> <ul> <li>integrate patch by David Mathog <mathog@seqaxp.bio.caltech.edu> to make this work on OpenVMS <li>rename some functions, e.g., <code>Index</code> to <code>xtermIndex</code> so that ports such as VMS which link externals ignoring case will not have library conflicts (reported by David Mathog). <li>correct logic of <code>do_reversevideo()</code>, which did not update the corresponding popup menu check mark (reported by David Mathog, this was a detail overlooked in patch #94). <li>change TRACE macro so semicolon is not within definition, making <em>indent</em> and similar programs work better. <li>add <code>depend</code> rule to Makefile.in <li>modify logic of boldColors resource to suppress it if an extended color control has been used, e.g., for 88-color or 256-color mode (patch by Todd Larason). <li>revise logic that handles menus and input translation for keyboard type so only one can be selected at a time. <li>restore kdch1=\177 for the Sun function-key type, and make the the Delete key send DEL (\177) if the oldXtermFKeys resource is set. <li>rephrase logic and ifdef's for POSIX VDISABLE to avoid preprocessor expression that will not compile on NetBSD/x86 1.4.1 (reported by Takaaki Nomura <amadeus@yk.rim.or.jp>). </ul> <H1><A NAME="xterm_124">Patch #124 - 2000/1/27 - XFree86 3.9.17b</A></H1> <ul> <li>change coding of editing keypad's "Delete" key to <escape>[3~, in the default (Sun/PC) keyboard mode. This makes the terminfo kdch1 capability independent of the coding of the backarrow key, which sends either backspace (8) or DEL (127). The reason for doing this (compatibility with the <em>screen</em> program) outweighs the choice of DEL (127) which was used in X11R5/X11R6 xterms. The <em>screen</em> program translates whatever matches kdch1 into <escape>[3~, even if it happens to be the stty erase character. <li>add encoding for control/?, to work around xmodmap or key translations which may confuse backspace and delete. A control/? will send DEL (127), and a control/H will of course send backspace (8). <li>add encoding for kcbt to <escape>[Z (fixes Debian #54840). <li>minor correction to logic that encodes Sun and DEC function keys to avoid sending an escape sequence if the key symbol is not found in xterm's lookup table. <li>simplify ifdef's in main.c for POSIX VDISABLE so the "^-" pattern is more likely to be implemented when <em>imake</em> configures xterm (fixes Debian #55105). <li>change manpage to make it clearer what codes are sent by the backarrow key. </ul> <H1><A NAME="xterm_123">Patch #123 - 2000/1/22 - XFree86 3.9.17a</A></H1> <ul> <li>add a note reserving OSC 51 for use in Emacs shell (request by Rob Myoff <mayoff@dqd.com>). <li>correct a missing backslash in xterm-vt220 termcap. <li>cleanup remaining quoted includes, preferring bracketed form. <li>minor configure-script macro updates from tin and vile. <li>add configure-script option for using utempter library, adapted from Redhat 6.1 patch for XFree86 3.3.5 <li>resync with XFree86 3.9.17a: <ul> <li>correction to QNX support (Frank Guangxin Liu) <li>some cosmetic changes that did not correct any reported problems. </ul> </ul> <H1><A NAME="xterm_122">Patch #122 - 1999/12/28 - XFree86 3.9.16f</A></H1> <ul> <li>move the suggested wheel-mouse button translations into charproc.c to simplify customization. Correct some minor logic errors in the support for buttons 4 and 5, used for wheel mice (reported by Bram Moolenaar). <li>implement <em>metaSendsEscape</em> resource, with corresponding control sequence and menu entry. Like <em>eightBitInput</em>, this causes xterm to send ESC prefixing the given key, but applies to all keys and is independent of the 8-bit/7-bit terminal setting. (requests by Alexander V Lukyanov and Marc Feeley). <li>correct potential indexing with negative subscript in udk_lookup(), (reported by Ian Collier <Ian.Collier@comlab.ox.ac.uk>). <li>modify configure script that sets TERMINFO_DIR to use ${prefix} rather than /usr if the --prefix option was specified (request by Zdenek Sekera <zs@sgi.com>). <li>modify checks for repeat-character control sequence to test the character class against xterm's state table, rather than the isprint() macro (patch by Alexander V Lukyanov). <li>change several functions to macros to improve speed <li>two corrections to simulation of bold font via overstriking: <ul> <li>use clipping to avoid leaving trash at end of the text, and <li>add brackets so wide-character logic does not fall-through into the overstriking logic (reported by Marc Feeley <feeley@IRO.UMontreal.CA>) </ul> <li>add several entries to termcap file to make it have the same set of aliases as the terminfo file. <li>scale the color values used for xterm-256color terminfo entry to 0..1000, as expected by ncurses. <li>change xterm-r6 terminfo definitions for F1-F4 to match program. <li>Add QNX/Neutrino support (Frank Guangxin Liu <frank@ctcqnx4.ctc.cummins.com>) </ul> <H1><A NAME="xterm_121">Patch #121 - 1999/11/14 - XFree86 3.9.16c</A></H1> <ul> <li>change label on "Sun/PC Keyboard" popup menu entry to "VT220 Keyboard", since the checked state corresponds to VT220 rather than Sun/PC. <li>add configure test CF_UTMP_UT_XSTATUS to handle the variants of utmp exit status (reports by Dave Ellement, Jeremie Petit, Tomas Vanhala). <li>amend treatment of ALT key (see <a href="#xterm_94">patch #94</a>) so that if ALT is used as a modifier in key translations, then no parameter will be sent in escape sequences for Sun/PC function keys (request by Dr Werner Fink). <li>modify default for OPT_I18N_SUPPORT to assume that <code>XtSetLanguageProc()</code> is available in X11R5. <p> Caveat: <code>XtSetLanguageProc()</code> was added fairly late in the X11R5 patches, and some vendors shipped buggy versions of this function (request by Tomas Vanhala). <li>correct configure macro CF_SYSV_UTMP to test-link with functions consistent with the header, e.g., getutent() for utmp.h and getutxent() for utmpx.h (reported by Greg Smith). <li>modify terminfo entry for <code>xterm-xfree86</code> to reflect modifiers for shift and control which (from a patch by Alexander V Lukyanov). <li>modify terminfo entry for <code>xterm-sun</code> to match the function-key definitions in ncurses. The pageup/pagedown and related function keys correspond to the Sun keyboard, which does not necessarily correspond with X's notion of those keys. <li>modify treatment of XK_Delete keysym so it transmits parameterized VT220-style <code><esc>[3~</code> if modifiers (shift, control alt) are given (request by Alexander V Lukyanov). <li>corrected misspelled resource name in command-line option for HP function keys. </ul> <H1><A NAME="xterm_120">Patch #120 - 1999/10/28 - XFree86 3.9.16c</A></H1> <ul> <li>refine the change to <code>SGR_Background()</code> in patch #119, by not flushing the pending scrolling operation if the background color is not actually changing. This combination occurs when using color-ls to display a long listing, since each line ends with an SGR0 which affects only the foreground color. The unnecessary flushing made it noticeably slower (reported by D Roland Walker <walker@pobox.com>). <li>remove obsolete documentation about modifiers which can be returned in mouse tracking mode, and modify logic to ignore modifiers other than the existing ones, e.g., NumLock (prompted by discussions with Christian Weisgerber and Brad Pepers <brad@linuxcanada.com>). <li>use free bit from obsolete shift-modifier coding of mouse tracking button events to encode buttons 4 and 5, e.g., for a wheel mouse (requests by Brad Pepers and Bram Moolenaar). <li>correct a place where the ptyInitialErase logic did not set the backarrowKey state, and modify it further to use tgetstr() rather than parse the termcap data returned from tgetent() so the ptyInitialErase logic will work when xterm is linked with a terminfo library (based on a patch by Dr Werner Fink <werner@suse.de>). <li>fix definition of HAVE_UTMP_UT_HOST for ISC configuration (patch by <michael.rohleder@stadt-frankfurt.de>) <li>improve configure script's utmp tests (based on reports by Greg Smith for os390, and David Ellement for HPUX). <li>modify sinstall.sh to use uid=0 rather than 'root' to determine if the installer is privileged. This is needed on some systems since more than one account may be privileged (report by Greg Smith). <li>add an application resource, <code>messages</code> (and a corresponding -/+mesg option) which controls the initial permission on the terminal: if messages is set to true (the default), behavior is as without the patch; if it is set to false (as per -mesg), the terminal is opened in mode 0600, thus producing the effect of the <code>mesg n</code> command. This is useful for users who want to redirect all their messages to one particular xterm: it is more pleasant to do this with xterm resources than with explicit calls to the <code>mesg</code> program (patch, description by David Madore <david.madore@ens.fr>). </ul> <H1><A NAME="xterm_119">Patch #119 - 1999/10/16 - XFree86 3.9.16c</A></H1> <ul> <li>add responses (DA and DSR) for DEC locator mode <li>add coding for ANSI color to DA response <li>implement UTF-8 translation for Media Copy (print) operations. <li>implement vt320 control sequences for Print Composed Main Display and for Print All Pages. The latter directs xterm to print the current screen as well as the scrollback buffer. <li>correct error in _GNU_SOURCE configure test, which left it always defined. <li>add more information, i.e., with strerror for some system calls in the main program which may fail due to insufficient permissions (prompted by a problem report for <code>-C</code> by Jeremie Petit <Jeremie.Petit@digital.com>). <li>add workaround for conflict between <X11/XPoll.h> and <sys/select.h> on AIX 4.3 (Richard Griswold <griswold@acm.org>). <li>add configure script test to resolve conflict between between <X11/XPoll.h> and <sys/select.h> <li>modify translation of UTF-8 sequences to reject "overly long" variations (patch by Markus Kuhn). <li>remove <code>utf8controls</code> resource, since Markus' change removes the corresponding logic. <li>correct a case where colors were not rendered properly. This happened when an application inserted several lines, then changed colors. If this was done all in one write, then there would be no intervening refresh, and the new color was applied to the pending scrolling operation which was awaiting the next refresh (reported by Stephane Chazelas <Stephane_Chazelas@Raytheon.com>). </ul> <H1><A NAME="xterm_118">Patch #118 - 1999/10/5 - XFree86 3.9.16b</A></H1> <ul> <li>refine configure test for utmp versus utmpx, to build on HP-UX 10.x (reported by David Ellement). <li>move the configure check for <code>const</code> after the check for ANSI C compiler options, since those may be required to make it work properly on HP-UX. <li>add configure test for defining <code>_GNU_SOURCE</code> <li>correction to <em>-hold</em> option, ensure that if data is already in the output buffer that it will be displayed before closing the PTY. <li>move the configure checks for setuid install of xterm into a script to avoid installing it setuid'd to a non-root user (reported by Adam Sulmicki <adam@cfar.umd.edu>). <li>correct configure script's check for termcap.h to avoid using ncurses' version of it on systems that have a working <code>tgetent()</code> function. This is needed to make <code>resize</code> work properly. <li>fix some typography in ctlseqs.ms description of DEC locator events (reported by Steve Wall). </ul> <H1><A NAME="xterm_117">Patch #117 - 1999/9/29 - XFree86 3.9.16b</A></H1> <ul> <li>change order of tests in configure script for utmp and utmpx to test utmpx first, to compile on Solaris (reported by Leena Heino <liinu@uta.fi> and Patrik Hagglund <patha@ida.liu.se>). <li>add a configure test for utmp.ut_xtime, needed for SCO Openserver, and for lastlog, needed for Redhat 6.0, to refine the utmp/utmpx auto-configure. <li>remove a spurious comma in an #undef (reported by David Green <greendjf@cvhp152.marconicomms.com> and David Ellement <ellement@sdd.hp.com> both on HP-UX, whose compiler does care about syntax). <li>change ifdef's using __CYGWIN32__ to __CYGWIN__ (reported by Suhaib M. Siddiqi <Ssiddiqi@InspirePharm.Com>, who is told that the next Cygnus release will drop that symbol in their next release). <li>minor cleanup of ifdef's for makeColorPair (patch by Steve Wall). <li>patch by Alexander V Lukyanov to work around problem observed in XFree86 3.3.5, reported as bug #5419 to Mozilla. From the problem report: <blockquote> xterm consumes cpu when selecting text with mouse (holding down left mouse button) and when a program working under the xterm outputs something to stdout. <p> Easy way to reproduce:<br> <code>while :; do echo aaa; sleep 1; done</code><br> (while this runs, select text and hold down left mouse button) watch cpu load.<br> release left mouse button - spinning stops. </blockquote> </ul> <H1><A NAME="xterm_116">Patch #116 - 1999/9/25 - XFree86 3.9.16a</A></H1> <ul> <li>modify warning if change-ownership of PTY fails; some configurations may not happen to have old-style pty's (reported by Bob Maynard). <li>improve check in configure script for group ownership of installed xterm; some platforms use the -g option of ls to toggle group off rather than on (reported by Greg Smith). <li>minor improvement to toolbar geometry, to make it not resizable. This still is not satisfactory (but is usable) since the toolbar overlaps the xterm widget if the window is resized to make it smaller. It appears that some work is needed for the xterm widget's geometry management to make it function properly. <li>implement configure script tests for utmp, tty group. <li>implement <em>-hold</em> option, allowing users to retain the window after a shell has exited (this is recently an FAQ, but prompted by a comment by Joachim Plaettner-Hochwarth <plaettner@aem.umn.edu> in comp.unix.programmer, that the IRIX winterm provides this option). <li>integrated change by Steve Wall to add support for DEC Locator control sequences for xterm: <pre> DECEFR - Enable Filter Rectangle DECELR - Enable Locator Reports DECSLE - Select Locator Events DECRQLP - Request Locator Position </pre> This allows the xterm mouse to be used with applications that use the DEC Locator sequences, such as VAX Tpu, or SMG$ based applications. <li>patch from Matthias Baake <Matthias.Baake@gmx.de>, for print action. From his notes: <ul> <li>Bug 1: Underlined text is preceded by ESC [0;2m . This should be ESC [0;4m , ESC [2m doesn't seem to have any effect. (print.c/send_SGR) <li>Bug 2: The check for the last non-empty column (while (last > 0) ... in print.c/printLine) omits the rightmost column of the screen, the loop must start with last = screen->max_col+1 instead of last = screen->max_col. <li>Bug 3: Any attributes of the first character (and of all immediately following characters with the same attributes) are ignored. The variable attr (print.c/printLine) should be initialized with 0, not with *a & SGR_MASK. </ul> </ul> <H1><A NAME="xterm_115">Patch #115 - 1999/9/18 - XFree86 3.9.16a</A></H1> <ul> <li>integrated changes by Steve Wall to implement an 88-color model for systems where 256-colors cannot be allocated. <li>when 256-color configuration is compiled, colored bold and underlining is not available; ifdef'd to avoid possible odd effects in this case (reported by Steve Wall). <li>add resource <em>cacheDoublesize</em>, to limit the caching of font information for double-sized characters. This addresses a problem reported by Aryeh Koenigsberg for X terminals with limited font memory. <li>modify treatment of line-drawing characters in UTF-8 mode so that the Unicode values are used rather than the C0 codes for storing the translated characters (request by Markus Kuhn). </ul> <H1><A NAME="xterm_114">Patch #114 - 1999/9/15 - XFree86 3.9.16</A></H1> <ul> <li>add configure script checks for Athena headers and libraries under /usr/contrib to work on HPUX (reported by several people: David Nixon <djn@csc.liv.ac.uk> Aryeh Koenigsberg <aryeh.koenigsberg@telrad.co.il> Johannes Mähner <johanm@camline.com> Andrew Gaylard <andrew.gaylard@bsw.co.za>). <li>add check to configure script if xterm is installed setgid rather than setuid, since wtmp and utmp may be installed with group-writable permissions other than root (based on Debian bug report #7112 by Bo Branten <bosse@ing.umu.se>). <li>rewrote logic that removes data from termcap entry, e.g., for titeInhibit, to make it less likely to remove the wrong data. <li>correct logic which checks for missing characters used for line drawing. The 0 character was tested unnecessarily, leading to some inefficiency when rendering. <li>change termcap capability which is used as input or output of ptyInitialErase logic from <em>kD</em> to <em>kb</em>. Christian Weisgerber <naddy@mips.rhein-neckar.de> pointed out in effect that <em>kD</em> (in terminfo <em>kdch1</em>) should correspond to the control sequence for <em>dch1</em>, which deletes from the current position toward the right. <li>check for failure to change ownership of the PTY device and warn when xterm is running setuid'd to root. This was reported to happen on the FreeBSD/NetBSD/OpenBSD systems as a result of the chflags() call. <li>add xterm-noapp terminfo entry to illustate a nominally bash-compatible terminal description. </ul> <H1><A NAME="xterm_113">Patch #113 - 1999/8/15 - XFree86 3.9.15b</A></H1> Several fixes. The main one is a first draft of pulldown menus. It's not complete (I have some minor/annoying geometry problems to correct), but is usable. Once it's complete I plan to add a menu to support additional selections that won't fit on the current popup menus. Also, this fits into my longterm plan to allow configuring with Motif libraries. <ul> <li>correct error in input conversion for NRC mode (reported by Stefan Traby <stefan@sime.com>). <li>fix initialization of num_lock data in Misc struct (since those fields of the reference widget aren't initialized), and add logic to deal with XVision whose NumLock key does not transmit but does alter keypad state. <li>correct a missing return-value in get_pty(), for SCO <li>add E2A fix for backspace (Greg Smith), i.e.,<br> #define VAL_INITIAL_ERASE A2E(127) <li>correct foreground color within cursor outline when the window is unfocused (reported by Stephane Chazelas). <li>corrected position of scrollbar set in ResizeScrollBar(), which left it positioned incorrectly if the right scrollbar were enabled from the popup menu but was not initially enabled. <p> I have noticed some additional problems with right-scrollbar on X11R5 which I will correct later. <li>integrate changes by Jean-Claude Michot for QNX from XFree86 3.3.4c <li>add resources menuBar/MenuBar, menuHeight/MenuHeight for later use in toolbar geometry. <li>add configure option --enable-toolbar <li>add missing definition to make ziconbeep logic not compile-in when configure script disables it. <li>add configure-check for input-method support in X libraries </ul> <H1><A NAME="xterm_112">Patch #112 - 1999/7/17 - XFree86 3.9Pw</A></H1> <ul> <li>add null-pointer check to FlushLog(), fixes a core dump when both -l and -lf options are used when xterm is configured with wide-character support. <li>remove "ISO" case for SD, which was due to a typographical error in ECMA-48 (reported by Paul Williams <paul@celigne.co.uk> for vttest). <li>add "FILES" section to manpage. <li>generate header file to initialize default resources for colors 16-255. <li>patches by Greg Smith for os390: <ul> <li>add README.os390 <li>use the pty_search() function to find an available pty/tty pair. <li>move E2A() call out of getXtermCell() to SaveText() function so it will be available in all configurations. </ul> <li>patches by Todd Larason: <ul> <li>enable SGR 48 5 in ISO color mode, not just 256 color mode <li>change configure's --disable-256-color option to --enable-256-color, to match its effect <li>fix OSC 4 xx ? (report ansi color) to report a string which can actually be used to set the color back <li>fix OSC 4 xx yy (change ansi color) to not allow setting colors > 15 in 16 color mode <li>simplify the COLOR_ settings a bit in ptyx.h, along with setting NUM_ANSI_COLORS needed for #1 and #4 above <li>correct string-terminator code passed for reference to OSC responses; when in 7-bit mode, only the final byte of ST was seen. <li>Allow multiple color #;name pairs in OSC 4, and document changes to match. </ul> </ul> <H1><A NAME="xterm_111">Patch #111 - 1999/7/10 - XFree86 3.9Pw</A></H1> <ul> <li>add control sequences for specifying the RGB value of the ANSI colors, and for configuring with 256 colors (patch by Todd Larason <jtl@molehill.org>). I made the default configuration to 16-colors, because xterm uses the default color map (which has only 256 colors). <li>correct an error in DCS $ q m reporting for colors 8-15 (Todd Larason). <li>add test/demo script for double size characters. Used this to test/correct display of double size characters that should wrap, underlined double size characters. <li>increased cache size for double size fonts to 8, to allow for both normal and bold fonts (from discussion with Aryeh Koenigsberg <aryeh.koenigsberg@telrad.co.il>). <li>integrated patch from Greg Smith <rys@epaibm.rtpnc.epa.gov> for port to OS390 (aka MVS). OS390 uses EBCDIC rather than ASCII. <li>correct an off-by-one in binary search limits in keysym2ucs.c (Markus Kuhn). <li>implement logging for UTF-8 mode. The output is written in UTF-8 form. </ul> <H1><A NAME="xterm_110">Patch #110 - 1999/6/29 - XFree86 3.9Pu</A></H1> <ul> <li>If colorMode is enabled by default, compile-in default resources to match the colors listed in XTerm-col.ad (this should fix a longstanding FAQ). <li>added new OSC 3 ; PROPNAME=VALUE ST escape sequence to set an arbitrary X property on the top level xterm X11 window. Omit "=VALUE" to delete the X property (patch by Greg Badros <gjb@cs.washington.edu>). <li>change internal flag used for <em>utf8controls</em> resource so we allow 31-bit range of characters (suggested by Thomas Wolff). <li>add check for 16-bit characters in OSC strings, change them to '?' (reported by Thomas Wolff). <li>modify logic of same_font_name() to avoid trying to interpret both parameters as wildcard patterns. That does not (cannot) work, and in some instances the font server will return unresolved wildcards for the normal or bold fontnames, making them match inadvertently, triggering the fallback overstrike logic (reported by Tim Adye). </ul> <H1><A NAME="xterm_109">Patch #109 - 1999/6/23 - XFree86 3.9Pt</A></H1> <ul> <li>correct range-check from patch #108, which resulted in not being able to select from the scrollback buffer (reported by Tim Adye <T.J.Adye@rl.ac.uk>) <li>correct "no available ptys" problem with Cygwin B20.1 (patch by Tim Adye). <li>modified install-ti rule in Makefile.in to allow override of the terminfo directory when doing a "make install", i.e., by assigning to TERMINFO_DIR (request by Zdenek Sekera <zs@sgi.com>). <li>added install-full rule to Makefile.in <li>resync mkdirs.sh and install.sh scripts against current autoconf <li>implement $(DESTDIR) in Makefile.in, making it simple to install xterm and associated files into a directory just for packaging a binary release (suggested by CaT <cat@zip.com.au>). <li>change IChar type to unsigned, rather than unsigned short, making room for a flag to keep with 16-bit characters to prevent them from being interpreted as C0 or C1 controls (reported by Thomas Wolff). <li>correct a typo from patch #107, incorrect array name, in the filterUTF8 function (patch by Bruno Haible <haible@ilog.fr>) <li>add <em>utf8controls</em> resource to specify whether xterm should interpret 16-bit characters unpacked from UTF-8 form as control characters if they happen to fall into that range. This behavior is left unspecified by the Unicode standard (request by Thomas Wolff). <li>modify handling of OSC to recover if application sends 16-bit characters with codes above 255. We cannot display them as is, but translate out-of-range characters to a '?' (reported by Thomas Wolff). </ul> <H1><A NAME="xterm_108">Patch #108 - 1999/6/19 - XFree86 3.9Ps</A></H1> <ul> <li>add a range-check to LastTextCol(), to guard against indexing before the beginning of the scrollback buffer. This appears to happen with certain fonts under X11R5 (reported by Stephane Chazelas <Stephane_Chazelas@Raytheon.com>). <li>implement resource <em>boldMode</em>, to allow disabling the simulation of bold fonts when the bold and normal fonts are not different (requested by Will Day <willday@rom.oit.gatech.edu>). <li>change the atom "UTF-8" to "UTF8_STRING", and fixes a few bugs in the UTF-8 selection (patch by Juliusz Chroboczek). <li>correct logic of binary-search in keysym2ucs.c (patch by Markus Kuhn). <li>add special interpretation of keysym codes above 0x1000000 as the corresponding UCS value plus 0x1000000 (patch by Markus Kuhn). </ul> <H1><A NAME="xterm_107">Patch #107 - 1999/6/12 - XFree86 3.9Pq</A></H1> <ul> <li>Two changes from Stephen P Wall. From his description: <blockquote> The first change is simple - I added ESC[3J to erase the stored lines above the screen. That's what the changes to util.c and ctlseqs.ms are. <p> The second change is to get the blinking cursor working. I took out the cursorBlinkTime resource, and put in cursorBlink (Boolean), cursorOnTime (time cursor is on in msecs) and cursorOffTime, and added a cursorblink item to the vtMenu to enable/disable it. </blockquote> <li>Integrated a patch from Juliusz Chroboczek <jec@dcs.ed.ac.uk>. From his description: <blockquote> With this patch, selection conversion works properly: <pre> ISO 8859-1 xterm -> ISO 8859-1 xterm (transferred as STRING); ISO 8859-1 xterm -> UTF-8 xterm (transferred as STRING); UTF-8 xterm -> ISO 8859-1 xterm (transferred as STRING); UTF-8 xterm -> UTF-8 xterm (transferred as UTF-8). </pre> It will not work properly if one xterm is in, say, ISO 8859-2. Actually, for this case xterm breaks the ICCCM routinely (sending ISO 8859-2 data as STRING), so I wouldn't worry too much about it. I have not changed the behaviour in eight-bit mode in any way. </blockquote> </ul> <H1><A NAME="xterm_106">Patch #106 - 1999/6/9 - XFree86 3.9Pq</A></H1> <ul> <li>remove duplicate fix for OpenBSD in resize.c <li>correct logic in ScreenWrite, which did not reset the high bytes of 16-bit characters when overwriting them with a 8-bit character string (reported by Thomas Wolff). <li>integrate patch by Markus Kuhn to provide limited support for input of UTF-8 16-bit data by a lookup table. <li>correct check in non_blank_line to ensure we're in wide-character mode before looking at the high bytes, for InsertChar. </ul> <H1><A NAME="xterm_105">Patch #105 - 1999/6/5 - XFree86 3.9Pp</A></H1> <ul> <li>implement new resource <em>trimSelection</em>, which allows xterm to trim trailing blanks from selected lines. This does not affect the highlighting. (reported by several people using <em>mutt</em>, including Hans Morten Kind <edphk@uib.no>, Jeremy <jeremy@exit109.com> and (Michael Fuller <msf@mds.rmit.edu.au>). <li>add patch by Matthieu Herrb to include term.h in resize for OpenBSD. <li>correct logic for UTF-8 in functions that hide and show the cursor; it was displaying a space whenever the low byte of the character at the cursor position was zero (reported by Thomas Wolff <Thomas.Wolff@icn.siemens.de>). </ul> <H1><A NAME="xterm_104">Patch #104 - 1999/5/30 - XFree86 3.9Pn</A></H1> This is a resync patch against XFree86 3.9Pn, reflecting changes which were submitted by Branden Robinson, who worked with Wichert Akkerman <wichert@cs.leidenuniv.nl> to set up ifdef's to handle GNU libc 2.1, and use getpt() which lets xterm avoid having to know the actual PTY name. <p> I have also added a few fixes for signed/unsigned mismatches, and corrected a problem in the configure script (the UTF-8 code was always configured since the Imakefile defines this). <H1><A NAME="xterm_103">Patch #103 - 1999/5/14 - XFree86 3.9Pm</A></H1> <ul> <li>correct selection logic: I omitted an offset that accounts for the distance into the scrollback buffer when rewriting this for patch #101. Also fixed a similar problem for selecting double size characters from the scrollback buffer (first was reported by D Roland Walker <walker@pobox.com>). <li>improved support for Unix98 PTY's, using patch in Debian bug report #35650, by J.H.M. Dassen <jdassen@wi.leidenuniv.nl>. From the patch description: <blockquote> <ul> <li>No longer links xterm against libutil on a glibc2.1 system. libutil is a compatibility library and should only be used when necessary. Rather than having get_pty() use openpty() from this compatibility library, use the real UNIX98 pty support in get_pty() (open()ing the master pty, through getpt() if available (glibc extension)). Use openpty() only under glibc2.0. <li>GNU libc2 is not Linux-specific; already it runs on the Hurd. It provides the UNIX98 pty functions (plus the getpt() extension), regardless of the underlying OS. Changed two constructs to look for GNU libc2 only, not GNU libc2 on Linux. </ul> </blockquote> <li>improve font configuration, by checking if the user's resource settings for normal and bold fonts give the same font sizes (fixes problem reported by Peter Waltenberg <peterw@dascom.com>). </ul> <H1><A NAME="xterm_102">Patch #102 - 1999/5/12 - XFree86 3.9Pm</A></H1> <ul> <li>revert change to openpty call in patch #101; this causes xterm to fail on DEC-Alpha OSF/1 4.0B (reported by H Merijn Brand). <li>modify print.c to move include of stdio.h after the autoconf'd xtermcfg.h since HP's ANSI C compiler otherwise sees inconsistent prototype for getopt, probably due to problem with const (reported by H Merijn Brand). </ul> <H1><A NAME="xterm_101">Patch #101 - 1999/5/10 - XFree86 3.9Pm</A></H1> <ul> <li>moved includes and definitions for 'select' from data.h to xterm.h to fix problem introduced by prototype for getPtyData, part of UTF-8 changes (reported by Jens Schleusener <Jens.Schleusener@dlr.de>) <li>added "Meta <Btn2Down>:clear-saved-lines()" default translation (patch by H Merijn Brand) <li>fixes to configure script and ifdef's in main.c to build on a HP9000/D390 (hppa-2.0w) running HP-UX 11.00 (64 bit) with egcs 1.1.2 and HP's ANSI C compiler (patch by H Merijn Brand <PROCURA_BV@CompuServe.com>) <li>add more parentheses in ifdef's (patch by Bob Maynard). <li>eliminate conflicting definitions for USE_TERMINFO in resize.c (reported by Jeremy Buhler). <li>change openpty call to pass NULL rather than ttydev parameter, since that was used only to estimate the length of the corresponding data, and may not really be long enough (reported by Andreas Jaeger) <li>update description in xterm manpage for character class table, which said it handles only 7-bit codes. <li>correct a typo in ScrnDeleteChar() which made it not clear the high byte of wide-character data. <li>add logic to convert selection to UTF-8 form when appropriate. This makes select/paste "work", but further work is needed to make UTF-8 recognized as a locale in Xlib. <li>correct right-limit check when selecting double-width characters. <li>change default answerback response to an empty string. </ul> <H1><A NAME="xterm_100">Patch #100 - 1999/5/3 - XFree86 3.9Pl</A></H1> <ul> <li>Correct a typo in the default resource value for backarrowKeyIsErase: it was always true (reported by Bram Moolenaar). <li>improve configure script's test if the installed xterm is setuid, in case that is a symbolic link. <li>correct "install-ti" rule in Makefile.in, by not setting a blank $TERMINFO value. That is interpreted as "." by ncurses' tic. </ul> <H1><A NAME="xterm_99">Patch #99 - 1999/5/2 - XFree86 3.9Pk</A></H1> <ul> <li>correct logic that computes num_ptrs count of the number of indices into the screen buffer. This is the maximum of the colors and character-set indices; was incorrect in patch #97. <li>correct argument type for sigsetjmp, incidental change in patch #96's Unix88 PTY patch (reported by Bram Moolenaar). <li>correct description of secondary DA in ctlseqs.ms (reported by Bram Moolenaar). <li>decouple the backarrowKey and ptyInitialErase resources by adding a new resource backarrowKeyIsErase, to accommodate people using applications which have hardcoded tests for characters 8 and 127 rather than relying on the stty settings. <li>modify the UTF-8 decoder so that all possible illegal UTF-8 sequences are properly represented by U+FFFD. This should be very helpful for developers of code that output UTF-8 strings for debugging. See the file utf-8-test.txt in http://www.cl.cam.ac.uk/~mgk25/download/ucs-fonts.tar.gz for a demonstration text that contains numerous illegal UTF-8 values. (patch by Markus Kuhn). <li>correct a place in ScrnRefresh where I was filling the high byte of a wide character with a space rather than a null (reported by Markus Kuhn). </ul> <H1><A NAME="xterm_98">Patch #98 - 1999/4/26 - XFree86 3.9Pk</A></H1> <ul> <li>correct data manipulation in unparseputc(), broken for little-endian machines by patch #97's UTF-8 changes. This meant that keyboard input on SunOS did not work, though Linux i386 was fine. <li>modify initialization for backarrowKey and logic for initial-erase to prevent the initial-erase from overriding an explicitly set backarrowKey resource (reported by Vikas Agnihotri). <li>add a missing null-pointer check in ScrnRefresh, for the wide-characters configuration. </ul> <H1><A NAME="xterm_97">Patch #97 - 1999/4/25 - XFree86 3.9Pk</A></H1> <ul> <li>add configure script test for -lutil, needed for openpty call when configuring xterm for Glibc-2.1 and Unix98 PTY's (first reported by Martin Lorentz" <m.lorentz@w12.link-goe.de>). <li>completely parenthesize ifdef expressions for Glibc (suggested by Bob Maynard). <li>add initial-erase options (-ie, +ie) to help message (reported by Vikas Agnihotri). <li>remove duplicate definition of USE_USG_PTYS (reported by Jeremy Buhler). <li>change termcap <em>kD</em> and terminfo <em>kdch1</em> to a DEL (\177). I overlooked this when separating the styles of keyboard with the <em>sunKeyboard</em> resources in patch #94, so that it normally matches the value of the stty erase character: <ul> <li>Reported by Jae Gangemi <jgangemi@ccf.rutgers.edu>, this caused emacs to not process the DEL properly, combining it with succeeding characters. <li>This does not appear to be related to a problem which I have found with <em>screen</em>, which translates the stty erase into the termcap <em>kD</em> or terminfo <em>kdch1</em> value (depending on how it is linked) if the $TERMCAP variable is set when <em>screen</em> is invoked. </ul> <li>add command-line options for enabling UTF-8 mode: -u8 and +u8. The more obvious -utf8 and +utf8 would conflict with xterm's -ut and +ut (utmp) options. The UTF-8 changes were requested by Markus Kuhn <Markus.Kuhn@cl.cam.ac.uk>. This patch does not complete UTF-8 implementation, but makes it usable, i.e., display and refresh work, and I am able to display the test cases which Markus provides. More work is needed to complete this feature: <ul> <li>the control sequences for switching in/out of UTF-8 mode are partly implemented (don't use them). Similarly, the switching between vt100 and tek4014 emulations when UTF-8 mode is enabled will not work properly. <p> You must use the -u8 command line option to use this feature, as well as compile with the OPT_WIDE_CHARS definition. <li>cut/paste only copies 8-bit characters. <li>logging is disabled in the wide-character configuration <li>printing only writes 8-bit characters. <li>input only does 8-bit characters. This is the area that I know least about. </ul> </ul> <H1><A NAME="xterm_96">Patch #96 - 1999/4/19 - XFree86 3.9Pj</A></H1> <ul> <li>modify Makefile.in to work with configure script's --srcdir option. (patch by Jeremy Buhler <jbuhler@cs.washington.edu>) <li>add checks for 'echo -n' equivalent for 8colors.sh and 16colors.sh scripts (reported by Vikas Agnihotri). <li>improve logic that looks for bold fonts to allow for wildcards in the specification for normal fonts, and to ensure that if a bold font is specified as normal, that xterm will simulate a bold version of that using a one-pixel offset overstrike (reported by Henrik Harmsen <harmsen@erv.ericsson.se>). <li>correct horizontal spacing of double width line-drawing characters that xterm simulates. <li>improve support for Unix98 PTY's, using patch in Debian bug report #35650, by Topi Miettinen <Topi.Miettinen@medialab.sonera.fi>. Andreas Jaeger says this also corrects a permissions problem reported by cat@zip.net.au <li>modify initial-erase logic to ensure that <code>ttyModes</code> resource overrides it. </ul> <H1><A NAME="xterm_95">Patch #95 - 1999/4/5 - XFree86 3.9Ph</A></H1> <ul> <li>modify primary DA response to allow a '1' parameter. <li>add printer and national replacement character sets to VT220 primary DA response. <li>document primary and secondary DA responses in ctlseqs.ms <li>use the patch number (e.g., 95) in the secondary DA response, providing user applications a means of determining the version of xterm for feature comparison (request by Bram Moolenaar). <li>make xterm respond to secondary DA when the decTerminalID is set for VT100. <li>limit user-defined keys (DECUDK) to VT220-style keyboard when sunKeyBoard resource is true. <li>modify ifdef's for Linux-2.2.x with Glibc-2.1 to work with Glibc-2.1 and no Unix98 PTY support (patch from From Andreas Jaeger <aj@arthur.rhein-neckar.de>) <li>add optional feature (resource and command-line options) to make xterm use the PTY's sense of erase character on startup, rather than requiring it to be \177, or set the PTY's erase character to match xterm's configuration. Note that while $TERMCAP is modified to reflect the actual configuration, the terminfo kdch1 string is not (request by Dirk H Hohndel <hohndel@suse.de>) <li>improve scripts in vttests to work with newer shells that do not use 'echo -n'. <li>add fonts.sh example script <li>correct inequality in handling of "#1" font specification. <li>correct call to XGetWMNormalHints() used for computing maximum screen size; the size hints may not have been set. <li>begin implementation of support for wide-characters (configure option --enable-wide-chars defines OPT_WIDE_CHARS, invoke xterm with -wc option to activate this feature). This patch optionally widens internal data structures, invokes the 16-bit text output rather than the 8-bit version and adds some tables. </ul> <H1><A NAME="xterm_94">Patch #94 - 1999/3/27 - XFree86 3.9Pf</A></H1> <ul> <li>further fixes for terminfo: ka1, ka3, etc., differ between the default xterm-xfree86 and xterm-vt220 entries. <li>change default (with sunKeyboard resource false) behavior of the editing keypad "Delete" to send a 127, like xterm-r6. The VT220-style <code><esc>[3~</code> is sent when sunKeyboard is true (reported by Tomas Vanhala). <li>add parameters to function keys to indicate if shift, control or alt are set. The codes are based on a description of a DEC VT510 with a PC keyboard, from Jeffrey Altman <jaltman@watsun.cc.columbia.edu>. <li>add control sequence 1035, set-num-lock action and num-lock menu entry to control the use of the NumLock and Alt keys for the Sun/PC and VT220 keyboard extensions. <li>implement DECSET/DECRST numeric keypad (DECNKM) mode. <li>modify terminfo and termcap to use recommended "X Window" or "X11" names rather than "X Windows" (reported by Tomas Vanhala). <li>suppress translation of shifted keypad "+" when sunKeyboard is true. <li>workaround unexpected behavior (perhaps bug) in XmbLookupString, which returns trash in the string buffer for numlock and control-key combined with keypad-keys. <li>modify ScrollBarReverseVideo() to keep scrollbar border visible when reverse video is toggled. <li>correct missing case for parameter 17 (set highlight color) in dynamic colors control sequences. <li>extend dynamic colors control sequences to allow users to determine the colors and font which are currently active. <li>minor tweak to OSC responses, to use BEL if the application used that to end the request, rather than ST. This works better with shell scripts, which may not handle an <code><esc>backslash</code> very well. <li>separate menu settings for reverse video from that done under program control. <li>corrected ifdef's for menus, which did not allow tek4014 to be suppressed properly (reported by Clint Olsen). <li>integrated patch from Pavel Roskin <pavel_roskin@geocities.com> for Linux-2.2.x with GLibc-2.1 and /dev/ptmx support: <ul> <li>main.c and resize.c were using different rules to determine whether ATT should be defined (actually USE_USG_PTYS is more apt). <li>copy definitions from main.c to resize.c to prevent sys/stream.h and sys/ptem.h from inclusion when SYSV is not defined <li>define CNUL if not already defined like other variables. <li>/dev/tty does exist in Linux, but it doesn't mean, it should be used. Therefore EACCES is now an acceptable result. <li>ifdef'd several calls such as <code>ioctl (ptyfd, I_PUSH, "ptem")</code> to build on Linux (I_PUSH is not defined when sys/stropts.h is not included). </ul> <li>initialize second "ltc" variable in main.c (reported by David Dawes). <li>provide definition for USE_USG_PTYS in screen.c <li>add resource-files to install rule in standalone Makefile.in <li>add sample scripts to illustrate titlebar controls, resizing and colors. </ul> <H1><A NAME="xterm_93">Patch #93 - 1999/3/14 - XFree86 3.9Pd</A></H1> Here are several fixes and minor enhancements. The chief ones are the fixes for NumLock mode and reverse video, since we had become used to working around the problems. <ul> <li>remove kfnd/kll/kslt strings from terminfo, because curses applications do not necessarily return khome/kend pairs (reported by Vikas Agnihotri). <li>implement NumLock resource which overrides the keyboard tables for the special case of keypad keys. This is a problem introduced in xterm by X11R6 changes, i.e., an ambiguity which in effect discarded vt100 keypad support. <li>modify Sun/PC keyboard mode to extend this (emulation of DEC vt100 keypad) to the remainder of the numeric keypad. Now, the default operating mode of xterm uses the keyboard tables as-is (except if the NumLock mode overrides), but provides good vt100 keypad compatibility if the Sun/PC keyboard menu item is checked. <li>separate command-line settings for reverse video from that done under program control. This is a problem which was introduced by X11R6. Though <em>correct</em>, most users are confused by allowing the reset command to undo the effect of the command-line <kbd>-rv</kbd> option. <li>add description of function keys, keypad and cursor keys to ctlseqs.ms <li>add terminfo entries for xterm-vt52, xterm-sun and xterm-hp <li>correct typo (missing case value) for DECSET 35, enable/disable shifted keypad action and a few compiler warnings (reported by Zdenek Sekera <zs@sgi.com>). <li>correct reporting of color values 8-15 in DECRQSS (reported by Vikas Agnihotri). <li>modify parsing of ttyModes resource to recognize "^-" as "undef" (requested by Tomas Vanhala). <li>integrate/extend changes to add iconify/maximize actions (from Edward S. Arthur <eda@ultranet.com>). <li>add control sequences for maximizing/restoring window, and for reporting maximum screen size. <li>add 'interpret' action, to support local function-key interpretation. Used properly, this makes most of the specialized actions of xterm redundant. <li>add control sequence private modes 1051, 1052 and 1052, for setting the Sun and HP function key modes, and for setting the Sun/PC keyboard mode. <li>add configure option --disable-maximize <li>add configure option --disable-num-lcok <li>extend descriptions of configure script options in INSTALL. </ul> <H1><A NAME="xterm_92">Patch #92 - 1999/2/5 - XFree86 3.9Nz</A></H1> <ul> <li>increase buffer size for tgetent (i.e., termcap) to 1500. This fixes a problem where <em>screen</em> is built using ncurses or GNU termcap and <em>xterm</em> is built using the standard termcap interface. The former does not limit the termcap size, while the latter is assumed to be no longer than 1023 characters. The <em>screen</em> program's termcap entry is about 1200 characters long. <li>change update_menu_item() to a function, to simplify debugging. This also reduces the executable by 4Kb. <li>add control sequences for DECSET 30, 1010, 1011 like rxvt (enable or disable some features that were only settable via resources or command line arguments). <li>add control sequence for DECSET 35, which enables/disables the shifted keypad functions. <li>add support for switching font sizes, by stepping through the font menu using shifted keypad plus and minus. <li>correct missing initialization of tekInhibit and tekSmall resources. <li>correct ifdef's in charproc.c for XtNgeometry and XtCGeometry (reported by Bram Moolenaar). </ul> <H1><A NAME="xterm_91">Patch #91 - 1999/1/21 - XFree86 3.9Nw</A></H1> <ul> <li>Implement logic to translate input characters which are mapped when in vt220 National Replacement Character mode (requested by Tomas Vanhala). <li>Resync configure scripts with my patches to autoconf 2.13 <li>Change order of -lXmu and -lXext to accommodate cygwin32 (reported by Vikas Agnihotri). <li>Add "-ti" option to set terminal emulation level from command line rather than via resource. <li>Simplify some of the preprocessor logic using #elif. </ul> <H1><A NAME="xterm_90">Patch #90 - 1998/12/13 - XFree86 3.9Nq</A></H1> This implements several small fixes and enhancements. The chief one implements fallback support for line drawing characters with fonts that do not include those characters. But I implemented that last. <ul> <li>If any of the glyphs in positions 0-31 (used by xterm to implement the VT100 alternate character set) are zero-sized (i.e., missing), xterm will reserve a normal space for the glyph when drawing. I implemented a simple stroke-drawing function to draw the line-drawing characters and a couple of the other (simpler) characters such as diamond. (This was suggested by Vikas Agnihotri). <li>Modify the computation of doublesize characters to work around font servers which shift the scaled characters up/down or do not give the correct width. <li>Add popup menu item and corresponding resource settings to disable the font-scaling logic for doublesize characters to work around (older) font servers which simply do not draw the fonts scaled to the size that they said they would. I see this problem on a SunOS system running X11R5; the X11R6 servers seem well behaved. <li>Implement new escape sequence, private mode 1049, which combines the switch to/from alternate screen mode with screen clearing and cursor save/restore. Unlike the existing escape sequence, this clears the alternate screen when switching to it rather than when switching to the normal screen, thus retaining the alternate screen contents for select/paste operations. <p>When I implemented the popup menu entry to toggle between the normal and alternate screens, I considered only pasting from the normal screen to the alternate; this improvement allows either direction. <li>Changed the termcap and terminfo for xterm-xfree86 and xterm-8bit to use the new 1049 private mode. <li>Modify the logic which switches between normal and alternate screens so that the save/restore cursor operations apply only to the current screen. That means that applications which use the terminfo smcur/rmcur or termcap ti/te capabilities will restore the cursor to the original position on the normal screen rather than to the most recent place where a save-cursor operation was performed. <p>I note that a real VT100 terminal would not behave in this way, but it is a moot point since the VT100 does not implement alternate screen, and therefore the save/restore cursor sequence would not be used in this context. I reviewed the logic which switches between normal and alternate screens based on some recent newsgroup postings as well as a proposed patch in the Debian group which attempts to do this (the patch has a bug, however, so I did not use it). <li>Add popup menu entry for toggling the titeInhibit resource. <li>Add new resource answerbackString, which overrides the default "xterm" returned by xterm when responding to an ENQ (control/E) character (request by Rajesh Vaidheeswarran <rv@fore.com>). <li>Add new resource keyboardDialect for setting the NRC display character set (request by Tomas Vanhala, who notes that I should add logic to translate the keyboard as well). <li>Add new command-line option and corresponding resources for making xterm generate escape sequences compatible with HP terminals. Like the existing Sun escape sequences, this is available as a popup menu item. It is enabled by the configure script with the option --enable-hp-fkeys (requested by Toni Mueller <sales@oeko.net>). <li>Add configure script option --disable-boxchars to disable the fallback support for line drawing characters. <li>Fix ifdef's for configure script --disable-ansi-color, and reviewed all configure options to ensure that all can be enabled/disabled appropriately. <li>Update config.guess and config.sub, from Lynx. </ul> <H1><A NAME="xterm_89">Patch #89 - 1998/11/20 - XFree86 3.9Nm</A></H1> This patch completes the implementation of double-sized character support for the VT100 emulation, and fixes a few minor bugs: <ul> <li>corrected the cursor position in HideCursor, which did not multiply the column by two when in doublesize mode. This bug, which did not appear in normal use, dates back to my original <a href="#xterm_44">changes</a> to partly implement double-sized characters. I noticed it when cat'ing a typescript from vttest's double-sized character test. <li>ensure that the current line is repainted when switching between single and double width characters. <li>reduce the number of bits used for double-sized character coding from 3 to 2, to make more room for soft-font codes. <li>copy newer ifdef's from the XFree86 3.3.3 release's main.c, which address details of glibc and powerpc. <li>moved definition of DECL_ERRNO in xterm.h to match XFree86 3.3.3 <li>modify <em>resize</em> to remove the ifdef on SVr4 that suppressed printing the script for $LINES and $COLUMNS. Solaris' resize utility does this; suppressing the behavior is unnecessary. </ul> I tested the double-sized characters using vttest and the xfsft patch. These fonts worked reasonably well: <pre> -bitstream-courier-medium-r-normal--0-0-0-0-m-0-iso8859-1 9x15 </pre> The iso8859 font does not include box characters, of course, but looks good. <H1><A NAME="xterm_88">Patch #88 - 1998/10/31 - XFree86 3.9Nk and 3.3.2h</A></H1> This refines my #85 patch by checking for a case where the font server returns a bold font that does not quite correspond to the normal font. When I asked for a bold version of the 6x12 font, the font server returned a near equivalent where the ascent and descent values did not match, causing xterm to leave lines across the display. This patch makes xterm reject that type of mismatch, falling back to the old font behavior. <H1><A NAME="xterm_87">Patch #87 - 1998/10/21 - XFree86 3.9Nj and 3.3.2f</A></H1> This corrects a problem reported by Stefan Dalibor. My table entries for the <em>printerExtent</em> and <em>printerFormFeed</em> resources used the wrong types for sizeof, causing the printer to not work properly on some platforms because the <em>printAttributes</em> resource was overwritten (e.g., Digital Unix with DEC Alpha). <p> I reviewed all of the resource table entries and fixed a potential problem with <em>resizeGravity</em>, which was typed as <em>int</em> rather than <em>XtGravity</em>. <H1><A NAME="xterm_86">Patch #86 - 1998/10/14 - XFree86 3.9Nj and 3.3.2e</A></H1> A small fix: when switching to/from the continuous mouse reporting mode, the event mask was incorrect if xterm was built under X11R5 because the original data was saved under an ifdef for active-icon. <H1><A NAME="xterm_85">Patch #85 - 1998/10/12 - XFree86 3.9Nj and 3.3.2e</A></H1> Some cleanup (I noticed the pixel droppings a few months ago after getting a new 17" monitor): <ul> <li>split-out the functions that load/reload fonts for xterm as new file fontutils.c to extend them to support automatic loading of bold font corresponding to the normal font. Adapted logic from EMU 1.3 for this purpose. This fixes most occurrences of pixel droppings from bold characters. <li>modified by renaming variables and adding casts to permit compile with g++. <li>modify headers so they can all be compiled without order dependencies, and use bracketed rather than quoting includes to allow compile from separate directory. <li>renamed xtermm terminfo entry to xterm-mono, to avoid conflict with Solaris entry now in ncurses. </ul> <H1><A NAME="xterm_84">Patch #84 - 1998/10/9 - XFree86 3.9Ni</A> and 3.3.2e</H1> Several small fixes and enhancements, including a patch from Bjorn Helgaas: <ul> <li>correct initialization of TERMCAP environment variable, which was frequently set to garbage on non-Linux systems because "termcap" and "newtc" contained random data from the stack. <li>remove the LINEWRAPPED attribute from lines as they are cleared. Previously, the attribute was set but never cleared. <li>make word and line selections work even when lines are wrapped by xterm. Previously, selections were limited to one screen line. </ul> as well as <ul> <li>modify logic for line-wrapping to reset the associated flag if the application deletes a character. This fixes a problem reported by Bjorn Helgaas where word/line selection would still wrap even after deleting characters from the first line. <li>add kll/kH capabilities to xterm-xfree86 entries in termcap and terminfo (request by Michael Schroeder). <li>shorten descriptions in termcap to make resolved entries all shorter than 1023 character limit. <li>use DECSTR control sequence to shorten initialization and reset strings in xterm-xfree86 termcap and terminfo. <li>use rmul/smul and rmir/smir in xterm-r5 terminfo to match termcap. <li>correct typos in initialization and reset strings in xterm-r5 termcap and terminfo. <li>disable special translations of key symbols (the backarrow key, the editing keypad and the keypad "+") when a modifier other than shift, control or numlock is used. This makes xterm handle the meta key as expected by people using emacs (reported by Pete Harlan <harlan@pointofchoice.com> in linux.debian.user newsgroup). </ul> <H1><A NAME="sync_83">Resync #83 - 1998/10/7 - XFree86 3.3.2e</A></H1> Merge changes through patch #83 with the 3.3.2e version. This follows a patch by Matthieu Herrb <matthieu@laas.fr> to add checks for non-null return from malloc. <H1><A NAME="xterm_83">Patch #83 - 1998/8/25 - XFree86 3.9Nb</A></H1> Several small fixes and enhancements: <ul> <li>add configure test to infer if xterm should be installed setuid based on previously installed xterm (reported by Stephen Marley and Stefan Dalibor). <li>integrate/extend patch by Jason Bacon to implement quasi-continuous mouse reporting. <li>correct control sequences transmitted by function keys F1 to F4 when sunFunctionKeys resource is true (it was still using the VT100 control sequences). <li>modify handling of backarrow key so that the control modifier toggles the backspace/delete interpretation set by the backarrowKey resource. <li>limit the row and column values used to report mouse position. </ul> From resync with XFree86 3.9Nb: <ul> <li>add support for the VSTATUS control character (patch by Robert Earl <rearl@teleport.com>). </ul> <H1><A NAME="xterm_82">Patch #82 - 1998/7/15 - XFree86 3.9Aj</A></H1> Bug fix for patch #81: <ul> <li>remove an #undef for NBBY, which caused compile problem on FreeBSD (reported by David Dawes). </ul> <H1><A NAME="xterm_81">Patch #81 - 1998/7/14 - XFree86 3.9Aj</A></H1> More bug fixes: <ul> <li>fix conflicting ifdef's for TIOCSLTC when building with Linux on AXP aka DEC Alpha (reported by Robin Cutshaw). <li>correction to patch #79, move assignment for *utptr->ut_user = 0; back into non-SVR4 ifdef in main.c, since this clobbers username on Solaris 2.5.1 (analysis by Will Day <willday@rom.oit.gatech.edu>). <li>corrected khome/kend in xterm-8bit terminfo description. <li>improve cursor color by making it always the reverse of fg/bg unless the cursorColor resource is set, i.e., to something other than the default foreground (reported by Vikas Agnihotri and Bram Moolenaar). <li>minor fixes for compiler warnings, including a syntax error in the AMOEBA ifdef's. </ul> From resync with XFree86 3.9Aj: <ul> <li>correction to patch #73, supply missing #else for fallback definitions of size_t, time_t (Robin Cutshaw <robin@intercore.com>). </ul> <H1><A NAME="xterm_80">Patch #80 - 1998/6/29 - XFree86 3.9Ai</A></H1> This fixes a couple of items leftover or introduced by patch 79: <ul> <li>take out the logic that suppresses editing-keypad in vt100 mode (those keys are too valuable to give up for a fine point of emulation). <li>corrected a couple of places in terminfo where I missed using the vt220-style editing-keypad codes for Find/Select (mapped to Home/End). <li>checked termcap file against terminfo, fix several places where it was inconsistent. </ul> <H1><A NAME="xterm_79">Patch #79 - 1998/6/28 - XFree86 3.9Ai</A></H1> This patch fixes several small bugs: <ul> <li>use X_EXTRA_LIBS in standalone Makefile.in (patch by Tomas Vanhala). <li>add new resource 'oldXtermFKeys' which provides backward compatibility for F1-F4 control sequences with TOG's xterm. <li>determine the server's default foreground/background Pixel values, needed if the -flipPixels X server option is used (reported by David Dawes). <li>correct logic for F1-F4 function keys so that they generate VT100 compatible escape sequences in VT220 mode, since that is what the numeric keypad is supposed to do (reported by Ron Johnson, Jr. <ronjohn@communique.net>). <li>modify logic for editing keypad to work more like VT220: don't pass those codes in VT100-mode unless oldXtermFKeys mode is set. <li>correct an interaction with the editing-keypad logic that prevented backarrow key from sending a 127 for the delete key (the 'remove' escape sequence was being sent instead). <li>use return-value from getuid() rather than the parameter, to work on systems which do not update the latter (patch by Kevin Buhr <buhr@mozart.stat.wisc.edu>) <li>correct scrollbar border color when toggling to/from secure keyboard mode (patch by Jeff Uphoff <juphoff@tarsier.cv.nrao.edu>) <li>modifications to terminfo file: <ul> <li>rename description to xterm-xfree86, adding an entry 'xterm' which is derived from xterm-xfree86 to simplify customization. <li>change string for kdch1 from \177 to \E[3~, to address complaints from Debian developers. (This applies to the key labeled "Delete", and does not affect the backarrow key). <li>add user-strings u6, u7, u8, u9 to entries to make them work with Daniel Weaver's "tack" program. <li>modify xterm-24, xterm-bold, xterm-boldso entries to disentangle them from explicit dependency upon xterm-xfree86. <li>add generic 'xterm-color' entry. <li>minor corrections to xterm-xfree86, xterm-8bit, xterm-r5 and xterm-r6 entries. </ul> </ul> <H1><A NAME="xterm_78">Patch #78 - 1998/6/3 - XFree86 3.9Ah and 3.3.2</A></H1> Again, most of the bulk of this patch is for ANSI conversion. I used the IRIX compiler's -wlint option to find the remaining functions that use K&R syntax (since gcc does not do this properly). Also, I changed the logic in the print code slightly to close unwanted files before opening a pipe to the printer. This may help in some configurations where the line printer hangs until xterm closes the pipe. <H1><A NAME="xterm_77">Patch #77 - 1998/5/26 - XFree86 3.9Ah and 3.3.2</A></H1> Most of the bulk of this patch is to convert the extended C (K&R functions with prototypes) to ANSI. I verified that on Linux by comparing object files, to ensure that I did not, for example, interchange parameters in the function declarations. <p> The rest of the patch fixes several minor bugs, and adds a few features: <ul> <li>back-out my use of ncurses "captoinfo -f" option (if/then/else/endif) formatting, since ncurses did not correctly filter embedded newlines in terminfo capability strings until _after_ ncurses 4.1, thus corrupting setf/setb/sgr strings (reported by Darren Hiebert and others). <li>document SGR 8, 28 (invisible/visible), add corresponding capabilities to terminfo description. <p> I would also add the 'prot protected capability, but the control sequences for that would not be recognized or properly ignored by the older xterm programs. <li>modify ChangeGroup to not suppress a null-resource, but treat it as an empty string (recommended by Stefan Dalibor). <li>add printerAutoClose resource to control whether printer is closed when going offline. More than one person reports problems (on Solaris 2.6 and Digital Unix 4.0) getting the printer to proceed unless xterm exits; I think that it is a problem flushing the pipe. Closing it ought to flush it. <li>adapt TOG fix-3 to in HandleKeymapChange and VTInitI18N (but adapt XtStackAlloc/XtStackFree for clarity, as well as fixing memory leak). <li>change calls on FillCurBackground to ClearCurBackground, in effect using XClearArea rather than XFillRectangle when clearing as a side-effect of scrolling and insertion (patch by Alexander V Lukyanov) <li>correct some places where insert/delete did not _move_ the color attributes, using memmove (patch by Alexander V Lukyanov <lav@long.yar.ru>) <li>add ifdef's for __CYGWIN32__, for port to cygnus version B19.1 (patch by Andrew Sumner <andrew_sumner@hotmail.com>). <li>remove #define for hpux that turned on USE_SYSV_ENVVARS, since this causes some applications (such as 'less') to get incorrect $LINES and $COLUMNS values (reported by Clint Olsen). <li>modify behavior for HP-UX, to set the "reserved" process group controls to _POSIX_VDISABLE so the TIOCSLTC ioctl does not produce an error (patch by Ben Yoshino <ben@wiliki.eng.hawaii.edu>). <li>correct length of underlining, reducing it by one pixel to avoid leaving a dot when the application does not clear the whole screen (patch by (Sergei Laskavy <Laskavy@cs.msu.su>). <p> I noticed this only recently myself (and other people as well); it depends on the font chosen. A 6x10 font shows it, but the other fonts (from XTerm.ad) do not. I also see a similar problem with the emulation of bold fonts. <li>add include for Xos.h to xterm.h, to ensure proper definitions (reported by Holger Veit). <li>update config.guess to recognize Unixware 2.1 and 7 (patch by Mike Hopkirk <hops@sco.com>). </ul> <H1><A NAME="xterm_76">Patch #76 - 1998/5/8 - XFree86 3.9Ah and 3.3.2</A></H1> A fix for the print-window function, and some minor cleanup: <ul> <li>modify logic that closes pipe in the print-window function to not use pclose, which does not work on all systems, since I did not open the pipe with popen (reported by Stefan Dalibor). <li>correct name of $(EXTRA_LOAD_FLAGS) imake variable (reported by Stefan Dalibor). <li>guard logic in ChangeGroup() function against null pointer (reported by Stefan Dalibor). <li>ensure that menu entry for toggling sunKeyboard resource is initialized (reported by Branden Robinson <branden@purdue.edu>). <li>gcc unused-variable warnings (reported by Bernd Ernesti <bernd@arresum.inka.de>) <li>rename global variable 'buffer' to 'VTbuffer' </ul> <H1><A NAME="xterm_75">Patch #75 - 1998/5/7 - XFree86 3.9Ah and 3.3.2</A></H1> This incorporates fixes from several people, as well as some improvements that I made based on feedback from users: <ul> <li>add option to standalone configure script, "--with-own-terminfo-dir", which causes xterm to pass a predefined value of $TERMINFO to the application. Also use this value in install rule "make install-ti", for the standalone configure script. (patch & feedback from Tor Lillqvist <tml@hemuli.tte.vtt.fi>) <li>change ifdef's for "hpux" to "__hpux" (patch by Tor Lillqvist). The imake configuration uses the former, but the latter is predefined by HP's compilers. <li>define USE_SYSV_ENVVARS for HP-UX, curses does not use $TERMCAP (patch by Tor Lillqvist). <li>on HP-UX, use the /dev/ptym/clone device to allocate PTY's. Works both on HP-UX 9 and 10. (patch by Tor Lillqvist). <li>modify configure script to obtain the $(EXTRA_LOADFLAGS) value from imake, needed for compiling under DEC OSF/1 (reported by Stefan Dalibor) <li>modify print-window action so that the printer is closed after printing a window, unless the printer was already opened (i.e., by an application running in the window). This makes the printing complete without having to exit xterm, since not all systems treat fflush through a pipe very well (reported by Stefan Dalibor) <li>modify printing code so that the ^M's are not printed if the printAttribute resource is set to zero (request by Stefan Dalibor). <li>correct typo in xterm.man, for the default value of printAttribute (reported by Stefan Dalibor). <li>correct printing code so that the alternate character set is printed, like other attributes, with escape sequences. <li>correct termcap description, removing spurious 'm' character from the 'op' capability (reported by Greg Woods <woods@weird.com>). <li>correct trace code so that the initial timestamp is set. <li>correct/modify utmp data for the Linux glibc 2 configuration, so that the ut_line member is set before using it to update wtmp (patch by Bill Nottingham <wen1@cec.wustl.edu>). </ul> <H1><A NAME="xterm_74">Patch #74 - 1998/4/27 - XFree86 3.9Ag and 3.3.2</A></H1> This corrects a couple of recent bugs and adds a new resource: <ul> <li>modify definition of TRACE_CHILD so that it does not conflict with ifdef's for USE_USG_PTYS in main.c (reported by Vikas Agnihotri <VikasA@att.com> and Stefan Dalibor). <li>correct ownership of file (actually pipe) written by the print controls. When undoing the setuid changes in patch #69, I overlooked this. Now xterm forks a process which resets setuid and routes the printer data as the real user. <li>add a new resource, "printAttributes", which controls whether color attributes (or any attributes) are sent to the printer. </ul> <H1><A NAME="xterm_73">Patch #73 - 1998/4/25 - XFree86 3.9Ag and 3.3.2</A></H1> This patch does the following: <ul> <li>implements a print-window facility for xterm. Though useful in itself, I added it as part of some debugging which I am doing. (Occasionally during an exposure event xterm fails to restore the proper colors for highlighted text, and printing the screen will show the internal states nicely). <p> The print facility now also displays the color information. (I will probably make this a resource). <li>modified the xterm-16color terminfo description to use the setaf and setab strings, which is a little more efficient (requested by Stephen Marley). <li>reduced some clutter of the ifdef/includes (e.g., stdlib.h, unistd.h, errno) making the configure script test for these. <p> I removed the symbols Size_t and Time_t, since they no longer serve a useful purpose. <li>added some debugging traces to show the initial screen size, and the success/failure of the ioctl calls pass handle window resizing events to the application (for Clint Olsen). <p> I also modified the trace code to produce two files since some of the information is produced by the child process. So now they are Trace-parent.out and Trace-child.out <li>updated configure test for ANSI compiler options to handle a special case for HP-UX 10.x (reported by Clint Olsen). </ul> <H1><A NAME="xterm_72">Patch #72 - 1998/4/17 - XFree86 3.9Ag and 3.3.2</A></H1> This is a patch from Chris Siebenmann <cks@hawkwind.utcs.toronto.edu>, which I have cleaned up a little, and integrated into the configure script. <p> From his description: <blockquote> This set of patches is the latest incarnation of patches originally written by Ian! D Allen, then of the University of Waterloo and now of who knows where; I have been carrying them forward from xterm to xterm ever since about X11R4. What they do is add an option so that when an iconified xterm receives output it prepends '*** ' to its icon title and (optionally) beeps the bell; deiconifying the xterm removes the '*** '. Over the years I've found this to be incredibly convenient for monitoring all sorts of low-activity things. </blockquote> <H1><A NAME="xterm_71">Patch #71 - 1998/4/12 - XFree86 3.9Ag and 3.3.2</A></H1> This patch is a slightly modified version of one by Richard Braakman, which prevents buffer overflow in the input-method and preedit-type parsing in xterm. I changed a couple of details to make the code more maintainable, and looked for similar things - copying into a fixed-size buffer (found none, though I did spot an unused variable). <H1><A NAME="xterm_70">Patch #70 - 1998/3/29 - XFree86 3.9Af and 3.3.2</A></H1> This patch corrects some minor bugs in xterm, and fills in some more details in the VT220 emulation: <UL> <LI>modify Imakefile to use SpecialCObjectRule for menu and data modules, making xterm build properly if logging is enabled (patch by Scott Sewall <scott@iprg.nokia.com>). <LI>restore "ich" capability to terminfo entries, since Michael Schroeder points out that "ich1" is the one which is the problem in Solaris vi. <LI>correct color of cursor, which would disappear on inverse-video since the initialization did not compare the cursor color against both foreground and background (reported by Olivier Calle). <LI>correct abbreviation-test for -version and -help options, making command-line option -vb work (reported by Stefan Dalibor). <LI>correct a dependency between ifdef's for OPT_I18N_SUPPORT and OPT_INPUT_METHOD (reported by Stefan Dalibor). <LI>split-out character-set translations as new module charsets.c, to implement VT220 national replacement character sets (a mode where some of the characters are displayed as specific European glyphs). This relies on xterm using an ISO 8859-1 font (approach suggested by Kenneth R. Robinette <zkrr01@mailbox.neosoft.com>). <LI>correct a missing increment, which made SS2 and SS3 controls repeat the shifted character. <LI>add xterm-nrc to terminfo to illustrate the VT220 national replacement character sets. <LI>reformat terminfo using new ncurses tic option "-f", which makes if/then/else/endif expressions easier to read. </UL> <H1><A NAME="xterm_69">Patch #69 - 1998/3/16 - XFree86 3.9Ad and 3.3.2</A></H1> This corrects the problem in xterm with utmp, reported by Olivier Calle <olivier@tc.fluke.com> as well as some other people after the XFree86 3.3.2 release. <P> The error was introduced by my patch #53 in XFree86 3.9r (October 1997). <P> The correction removes the reset of setuid/setgid before the main event loop, and solves the problem which I had worked around in a different manner: for some reason, the particular waitpid() call in creat_as() hangs, does not return when the child process exits. I changed the ifdef's to force the Linux configuration to use wait() instead. This call appears to work properly on other platforms such as SunOS and Solaris. <P> I also added tests in the standalone configure script to check for the existence of waitpid(). <H1><A NAME="xterm_68">Patch #68 - 1998/3/4 - XFree86 3.9Ad and 3.3.1z</A></H1> This corrects another problem with the logic for highlightColor resource. As reported by David Dawes: <blockquote> I've just noticed a problem with with the "inverse" control sequence (ESC[7m) with the 3.3.2 xterm. What it does is sets the background black, and the text the usual foreground colour rather than simply swapping the foreground/background. </blockquote> This appears to be because when I added logic to check that the highlightColor was distinct from foreground and background colors, I did not add a further check to see that it was not black (I would make an explicit check for the resource not being set, but see nothing definite in the headers that would let me reference an explicitly-undefined Pixel value, though there are some implications in xpm.h). But this should work. <H1><A NAME="xterm_67">Patch #67 - 1998/2/23 - XFree86 3.9Ad and 3.3.1e</A></H1> This patch does the following: <UL> <LI>improve test for highlightColor so that xterm does not attempt to use that unless it is different from the foreground and background colors (reported by Stefan Dalibor <Stefan.Dalibor@informatik.uni-erlangen.de>. <P> I could not reproduce this until I noticed that the -rev option exposed it nicely. <LI>remove ich and ich1 from xterm and xterm-8bit terminfo descriptions. SVr4 terminfo documents that you must not combine these with smir/rmir, but ncurses allows it, opening a hole. Solaris 2.6 vi does not work properly if it is using a terminfo description when these are combined, since it was written to accommodate old terminals that required it (reported by Stephen Marley). <LI>restore 1-pixel overlap of scrollbar border with left edge of window (reported by Jim Burmeister <jimb@metrolink.com>). <LI>add a configure option, --enable-logfile-exec, which allows the user to specify a pipe for logfile. This defines ALLOWLOGFILEEXEC. <LI>makes the ALLOWLOGFILEEXEC code compile & run, if configured. <LI>minor documentation nits. </UL> <H1><A NAME="xterm_66">Patch #66 - 1998/2/16 - XFree86 3.9Ad and 3.3.1d</A></H1> This fixes the problem reported with failure to build the <EM>resize</EM> program (BSDI, OSF/1) due to not having <termcap.h>, by changing the ifdef to one that would be set only if the file exists (not currently specified, except by the standalone configure script). We do not really need to include <termcap.h> to build, but only for a clean compile, since it may declare the tgetent() prototype. I also updated the man-page for <EM>resize</EM>, since I had recently noticed that it can be used to resize <EM>xterm</EM> using the "Sun" control sequences option. <H1><A NAME="xterm_65">Patch #65 - 1998/2/14 - XFree86 3.9Ad and 3.3.1c</A></H1> This is a small patch to xterm's 8-bit terminal description. I noticed while testing ncurses that I had specified the wrong (VT100-style) codes for the F1-F4. Xterm only uses VT220-style function keys in 8-bit mode. <H1><A NAME="xterm_64">Patch #64 - 1998/2/8 - XFree86 3.9Ad</A></H1> This fixes the following problems with xterm: <UL> <LI>save/restore the ANSI foreground and background colors with the other visible attributes in the save-cursor and restore-cursor operations. This works around a problem with vim, which apparently assumed that switching between the normal and alternate screens resets the colors (reported by Jim Battle <jb@chromatic.com>). <P> It would be nice to implement save/restore cursor as a stack (and solve this type of problem completely), but that would lead to incompatibility with applications which assume they are running with a VT100 or VT220. <LI>corrects behavior of a restore-cursor operation which does not follow a save-cursor (it is supposed to set the character sets to a known initial state). <LI>extends the sunKeyboard resource (and menu toggle) to modify the home, end and delete keys on a Sun or PC editing keypad, making them generate codes compatible with DEC VT220's Find, Select and Remove keys. <LI>corrects a length in checking command-line options, which caused the "-help" message to not work when X was not running. <LI>adds some detail to the man-page (requested by Jason Bacon <acadix@execpc.com>) <LI>modify the standalone configure script to ignore the broken nsl and socket libraries on IRIX 6.2 (the ones on 5.2 also are broken, so this change just widens the check for the system version number). </UL> <H1><A NAME="xterm_63">Patch #63 - 1998/2/5 - XFree86 3.9Ad</A></H1> This is another patch from Bjorn Helgaas <helgaas@rsn.hp.com>, which I've reviewed (and learned some). Following are his notes: <P> I poked around some more and finally got xterm-62 to build and run cleanly on HP-UX 10.20. Here are the patches. They look sort of ugly, so here's a little explanation: <UL> <LI>aclocal.m4: Removed side effects from the AC_CACHE_VAL commands in CF_FUNC_TGETENT. Previously, LIBS was set inside AC_CACHE_VAL, which worked fine the first time configure was run, but failed if there were cached values. <LI>aclocal.m4: Added temporary setting of LIBS before AC_TRY_LINK in CF_FUNC_TGETENT. Previously, the last value set by the AC_TRY_RUN loop was used, so only -lcurses was checked. <LI>configure.in: Added temporary setting of CPPFLAGS before AC_CHECK_HEADERS for X11 files. Previously <X11/DECkeysym.h> and <X11/Xpoll.h> were found only if they were in the compiler's default include directories, even if `--x-includes=DIR' had been used or AC_PATH_XTRA had found them elsewhere. </UL> The problem on HP-UX was that we were linking with -lcurses rather than -ltermcap due to the second bullet above, and apparently something in HP-UX curses is broken. This seems very strange, because the only thing used is tgetent, which should affect any tty/pty configuration, but I lost interest in tracking down the exact problem. <H1><A NAME="xterm_62">Patch #62 - 1998/1/23 - XFree86 3.9Ac</A></H1> This is a patch mostly by Bjorn Helgaas <helgaas@dhc.net> (I added the os2main.c change, and a little of the documentation). From Bjorn's description: <UL> <LI>If you use the "-hc <color>" option or set the "highlightColor" resource, text is highlighted by changing only the background color, rather than using reverse video. I find this easier to read, especially when selecting multi-colored text, and it is similar to the way Netscape shows selections. <LI>Most of the code changes are under "#if OPT_HIGHLIGHT_COLOR". The principal exception is in screen.c, where I added a couple calls to resetXtermGC(). This seems like it could be a bug even without the color highlighting changes (though I don't pretend to understand all the logic). </UL> <H1><A NAME="xterm_61">Patch #61 - 1998/1/17 - XFree86 3.9Ac</A></H1> This patch modifies the reset behavior of xterm slightly: <UL> <LI>change the terminfo entry so that rs1 (one of the strings used by the 'reset' program) does a hard reset rather than switching character sets. This is more in accord with other terminal descriptions. <LI>modifies the treatment of hard reset by the xterm program to reset the saved lines. <LI>corrects hard reset by also resetting user-defined keys (DECUDK). </UL> <H1><A NAME="xterm_60">Patch #60 - 1998/1/10 - XFree86 3.9Ab</A></H1> This fixes some minor bugs and adds new functionality: <UL> <LI>add support for blinking text. <UL> <LI>This does not actually cause the text to flash, but text with the blink attribute can be displayed in color, using new resources colorBL and colorBLMode. <LI>If colors are not used, the blinking text will be displayed as before (just like bold). The main purpose of this is to make applications work properly when they assume the emulator supports blinking text. <LI>I did this by moving the per-cell LINEWRAPPED flag to a per-line flag, to make room for the new BLINK flag. There were no per-line flags, so this changes a lot of logic. </UL> <LI>corrected missing save-cursor logic in the handling of SGR 1048 (the new control sequence I added in patch #54, 1997/10/17). Reported by Darren Hiebert. <LI>flush the output of the transparent printing after each line Reported by Tomas Vanhala <vanhala@ling.helsinki.fi>. <LI>correct the modes that are affected by save/restore cursor by adding WRAPAROUND and PROTECTED. <LI>corrected placement of one of the XSync calls that I added in patch #51, 1997/9/15, which had the side-effect of writing on the window border when the xterm was resizing from 132 to 80 columns. <LI>work around an incompatibility of the XKB definition used in xterm versus that symbol from IRIX 6.2's imake definitions (by adjusting the standalone configure script). </UL> <H1><A NAME="xterm_59">Patch #59 - 1998/1/5 - XFree86 3.9Ab</A></H1> My last patch has an off-by-one error in the comparison for argc. Douglas Kosovic <douglask@dstc.edu.au> showed me where (he got a core dump). Also, I think this explains Clint Olsen's problem, but the symptoms were more subtle (EINVAL for a system call if the -display option is omitted). <H1><A NAME="xterm_58">Patch #58 - 1998/1/3 - XFree86 3.9Ab</A></H1> This patch does the following: <UL> <LI>implement logic to permit xterm to work with proportional fonts. <UL> <LI>Thomas Wolff <Thomas.Wolff@sietec.de> requested this (but it isn't exactly what he's asking for - that's a more involved task). <LI>I chose to do this by rendering the characters on a fixed pitch, because it would not be useful for existing applications to display varying numbers of characters on each line. <LI>Except that this forces the display to be wider, it works reasonably well. A couple of special cases (reverse + colorBD, for example) do not display with proper colors, since the inter-character gaps are painted with the background. </UL> <LI>added a version number to the program (several people have requested this). <LI>make the -version and -help options interpreted before the program attempts to open the display. <LI>minor reorganization of the man-page (ordered the options, resources and translations alphabetically - and eliminated some duplication). <LI>corrected a misspelled filename in Makefile.in, and added a lint rule. <LI>updated the configure script to correct behavior when it cannot find imake, as well as to fix the IRIX+gcc build (conflict with /usr/include). <LI>regenerated the configure script with a newer patch to autoconf that fixes a problem with environment space vs the configure --help message. </UL> <H1><A NAME="xterm_57">Patch #57 - 1997/12/26 - XFree86 3.9Aa</A></H1> This patch is mostly concerned with the standalone configure script; a few minor corrections are added: <UL> <LI>add configure option --disable-tek4014, to allow xterm to be built without the tek4014 emulation. <LI>add configure option --with-terminal-type, to allow xterm to be compiled with default $TERM value other than "xterm" (e.g., "xterm-16color") -- requested by Stephen Marley <stephen@memex.com>. <LI>fix a typo in the configure --help message -- reported by Darren Hiebert <darren@hmi.com>. <LI>review diffs between main.c and os2main.c, to make them more alike. (applies some minor bug-fixes to OS/2's version). <LI>add missing quotes in memmove/bcopy configure test </UL> <H1><A NAME="xterm_56">Patch #56 - 1997/11/28 - XFree86 3.9x</A></H1> This patch is based on analysis by Arfst Ludwig <arfst@luxor.IN-Berlin.DE>, who reported: <blockquote> Setting the following resources xterm (all current versions) receives a segmentation fault on <Btn2Up> after scrolling: <PRE> *XTerm*VT100*translations: #override \ ~Shift~Ctrl<Btn2Up>: insert-selection(PRIMARY, CUT_BUFFER0)\n\ Shift~Ctrl<Btn2Up>: insert-selection(CLIPBOARD, CUT_BUFFER1)\n\ ~Shift<BtnUp>: select-end(PRIMARY, CUT_BUFFER0)\n\ Shift<BtnUp>: select-end(CLIPBOARD, CUT_BUFFER1) </PRE> (The above resources intention is to be able to paste the latest selection even if the xterm was cleared.) <P> And here is how it works (and a fix!): The widget given to the action handler as first argument is not guaranteed to be a XtermWidget (it can be the ScrollbarWidget). Instead of accessing the widget's member directly XtDisplay gives the required pointer in a safe way. </blockquote> I noticed that this was not the only instance (by reading the code, and testing with his example), and extended the solution to check the widget-class to ensure that it is indeed xterm's widget class before attempting to use it in the context of translations. <H1><A NAME="xterm_55">Patch #55 - 1997/11/25 - XFree86 3.9x</A></H1> This fixes the segmentation violation noted by Rogier Wolff about a month ago. He'd set xterm to 400 (rows) by 150 columns, which broke because there were limited buffers (200 rows) used for juggling data when adding or deleting lines and for switching between alternate and normal screens. I replaced this by an allocated buffer. <P> The bug is simple to test if you set titeInhibit false. <H1><A NAME="xterm_54">Patch #54 - 1997/10/17 - XFree86 3.9s</A></H1> This patch does the following: <UL> <LI>correct a minor placement problem with the right scrollbar. <LI>implement a new set of control sequences for switching between the normal and alternate VT100 screens. These work around the older sequences limitation that required modification of the runtime $TERMCAP to cooperate with the titeInhibit resource (that can't work with terminfo). I do this by moving all of the functionality of the rmcur terminfo capability into the control sequences. <LI>implement the alternate-screen menu entry </UL> <H1><A NAME="xterm_53">Patch #53 - 1997/10/12 - XFree86 3.9r</A></H1> This patch adds a fix and implements a new feature (as well as some minor typos): <UL> <LI>JCHANDRA@Inf.COM (JCHANDRA) noted that there was still a problem with the wait call with the logging option. It hung when the logfile was opened as a command-line option. I fixed this by moving the StartLogging() call down past the place where I'd reset the setuid mode. So the logfile is opened as the real user, without having to fork. <LI>Michael Rohleder <michael.rohleder@stadt-frankfurt.de> sent me a patch which implements right-scrollbars for xterm. I used that as a starting point, renamed the command-line options and reduced the number of ifdef's. </UL> <H1><A NAME="xterm_52">Patch #52 - 1997/9/29 - XFree86 3.9q</A></H1> This patch addresses bugs and requests reported by <UL> <LI>Bob Maynard <rmaynard@montana.com>, <LI>Clint Olsen <olsenc@ichips.intel.com>, <LI>JCHANDRA@Inf.COM (JCHANDRA), <LI>Michael Schroeder <Michael.Schroeder@informatik.uni-erlangen.de>, <LI>Pablo Ariel Kohan <pablo@memco.co.il> </UL> Some of the changes are interrelated (it was an unusually busy week). <UL> <LI>change the default resource value for colorMode to true, matching the Xterm.ad file. <LI>correct behavior of 'ech' control, making the default and 0 parameters erase one character rather than to the end of line (reported by Michael Schroeder). <LI>add resource boldColors, command-line options +pc and -pc and configure-script option to specify behavior of xterm's mapping bold colors 0 through 7 to colors 8 through 15. (request by Pablo Ariel Kohan). <LI>add resource colorAttrMode to specify whether colorULMode and colorBDMode can override the ANSI colors (from a problem report by Clint Olsen). <LI>correct a conflict between colorULMode/colorBDMode versus ANSI colors, where exposure events would occasionally pick up the former (e.g., colorBD) rather than ANSI colors. Testing the colorAttrMode made this apparent, though it has been in the code since 3.2A (patch #35 in Jan 1997). <LI>correct two problems with the optional logging support. On Linux at least, the waitpid call in creat_as hangs when the logging is toggled from the popup menu. Also, the mktemp template has the wrong number of X's (since X11R5!). Fixed the waitpid problem by exploiting the fact that the setuid behavior is reset before the popup menus are available. (reported by Jayachandran C.). <LI>add configure script options for building with the Xaw3d and neXtaw libraries. <LI>correct CF_IMAKE_CFLAGS standalone configure script macro, so that it will pick up $(ALLDEFINES) rather than $(STD_DEFINES). This is needed to make scrollbars work on Linux, since that uses narrow prototypes. (reported by Bob Maynard). <LI>various minor updates to configure-script macros. </UL> <H1><A NAME="xterm_51">Patch #51 - 1997/9/15 - XFree86 3.9p</A></H1> Most of this patch is related to the standalone configure script, though there are fixes/enhancements as well: <UL> <LI>add a new resource sunKeyboard, with associated command-line option and menu-toggle that allows using a normal Sun or PC keyboard to generated the complete DEC-style function keys and keypad. <LI>correct a reversed foreground/background test in the control sequence that replies with the current SGR settings. <LI>correct, by invoking XSync, a display problem that caused the program to not properly update newly exposed areas when a font change or 80/132 resize request was not completely accepted. <LI>restructured autoconf macros (I made a library of all of the macros across the complicated configure scripts I'm working on). <LI>use the autoconf config.guess and config.sub scripts to better identify the host-os. <LI>improve the configure script that uses 'imake' as a fallback for definitions. <LI>correct several instances of unsigned/signed mixed expressions. </UL> I've tested the configure script on Linux, SunOS 4.1.3, Solaris 2.5.1, IRIX 5.2 and 6.2, AIX 3.2.5 and CLIX 3.1 (all but the last run properly as well). <H1><A NAME="xterm_50">Patch #50 - 1997/8/22 - XFree86 3.9m</A></H1> This is a collection of small fixes, and a couple of minor enhancements: <UL> <LI>plug a security hole in the implementation of Media Copy (print) by invoking setuid just before the main loop. <LI>add an ifdef'd include for <sys/termio.h> for HP-UX, which allows the program to process SIGWINCH events (this is a bug in X11R6.3) <LI>add state-table entries for VT52 emulation to enter/exit keypad application mode. <LI>disable the popup-menu entry for 8-bit controls when the terminal-id is less than 200 (e.g., VT52 or VT100). <LI>ensure that the popup-menu entry for 8-bit controls is updated when the application enables/disables this mode, including the response to a full-reset. <LI>implement VT300 DECBKM feature: set interpretation of the backarrow key to either backspace or delete. The initial setting is via resource; it can also be modified in the main popup menu. <LI>implement VTxxx KAM (ISO AM), which allows a keyboard to be locked (i.e., the terminal discards input). <LI>implement VTxxx SRM, which is used to control local echoing of input on the terminal. <LI>add terminfo and termcap entries for xterm-8bit, a variation of the xterm description that uses 8-bit control characters. <LI>add fallback definitions for Imakefile to allow it to work on some X11R5 systems that have no SpecialCObjectRule or ProgramTargetName macros. <LI>add .c.o and .c.i rules to standalone Makefile.in <LI>correct order of -lXmu and -lXext in standalone configure script. <LI>add configure script options to allow selective disabling of active-icon, input-method and i18n code (mainly for users with X11R5 or an incomplete X11R6 configuration). <LI>change menu-indices from #define's to enum values, thereby making it work better with the ifdef's for logging and active-icon (the X11R6.3 active-icon code is incorrectly ifdef'd; this corrects an error introduced by incorporating that code). <LI>correct minor compile errors in the configuration where active-icon is not used. <LI>add configure option to suppress echoing of long compiler commands <LI>correct spelling of decTerminalID in configure script help message <LI>use gcc __attribute__((unused)) to quiet warnings about unused parameters when compiling with -W (to make it simpler to find the real problems). </UL> <H1><A NAME="xterm_49">Patch #49 - 1997/8/10 - XFree86 3.9k</A></H1> This patch implements the VT100/VT220 Media Copy (i.e., print-screen) control sequences. <H1><A NAME="xterm_48">Patch #48 - 1997/7/26 - XFree86 3.9j</A></H1> This patch does the following (all but the first affect only the standalone configure script): <UL> <LI>minor correction to positioning of underlines for small (e.g., 5x8) font size. <P> The existing behavior allowed underlines to be drawn outside the character-cell, so they weren't cleared properly under some circumstances. <LI>adds more special-case tokens to the standalone configure script's imake-option filter (e.g., "&&", since a "make -n main.o" on my IRIX system uses that shell construct). <LI>adds a '--enable-logging' option for the standalone configure script. <LI>adds check and ifdef's for the standalone configure script to allow for building on platforms with X11R6, which lacks Xpoll.h (introduced in X11R6.1). </UL> <H1><A NAME="xterm_47">Patch #47 - 1997/7/13 - XFree86 3.9i</A></H1> This patch does the following <UL> <LI>corrects an indexing error in the doublesize character logic (button.c) that caused core dump (this was reported by J. Wunsch). <LI>corrects the logic of ShowCursor when it is painting in a doublesize cell (charproc.c). <LI>corrects, according to vttest, the behavior when switching to doublesize characters and back again (doublechr.c). <LI>adds cbt (back_tab) to the terminfo description (this was something that I'd overlooked as applicable to curses optimization last summer). <LI>corrects, for the standalone xmc test, the logic for disabling xmc. </UL> <H1><A NAME="xterm_46">Patch #46 - 1997/7/4 - XFree86 3.9h</A></H1> This is a patch to provide test-support for some work I'm doing on ncurses. It does not modify the normal configuration of xterm; the code is compiled if the standalone configure option "--enable-xmc-glitch" is specified. <H1><A NAME="xterm_45">Patch #45 - 1997/7/2 - XFree86 3.9h</A></H1> This fixes the problem reported with xterm's cursor color versus the background (the second chunk in this patch) and also removes some duplicate initialization of the cursor GC's. If the cursor color at startup is the same as the background, then xterm will use the reverse GC, ignoring the setting of the colorMode resource. <H1><A NAME="xterm_44">Patch #44 - 1997/6/22 - XFree86 3.9g</A></H1> This implements the first part of the VT100 doublesize characters for xterm, as well as fixing a handful of bugs: <UL> <LI>the doublesize character support uses the normal font (using scaled fonts will be another patch) with blanks to simulate doublesize characters. This patch does most of the global changes that'll be required. I've hidden most of the details in macros and ifdef's so it's easy to configure out (part of the patch is a configure option for that purpose). <LI>corrected limits in DeleteChar() function -- it's always ignored the size of the left border and scrollbar. I noticed this when working on the doublesize characters since the glitch was doubled in size (i.e., it wrapped some garbage around the right margin). <LI>corrected 'memmove()' logic, for standalone builds (it referenced a malloc wrapper from my development library). <LI>add a check for HideCursor() to prevent repeated screen updates (which can cause a spurious cursor glitch to appear, e.g., during scrolling). I noticed this with the 3.2A version (but only a few weeks ago, when I started working on this patch). </UL> <H1><A NAME="xterm_43">Patch #43 - 1997/6/10 - XFree86 3.9d</A></H1> Here's a fix for two problems: <UL> <LI>modify handling of tgetent results in xterm and resize programs to make them tolerant of missing termcap file, or unknown terminal name. In this scheme, an explicit "-tn" option will succeed, overriding the fallback list. <LI>a nit in the configure script (log extra information to help diagnose which case of the test-compile of tgetent was used). </UL> <H1><A NAME="xterm_42">Patch #42 - 1997/6/8 - XFree86 3.2Xl</A></H1> Bram Moolenaar reported that the cursor color changed unexpectedly while scrolling. The cause was that it used the same GC's as the logic that draws the ANSI colors. The bug only appears if the cursorColor resource isn't set, and has been present since the initial implementation early last year. (The same bug also appears in rxvt ;-). Here's a fix. <H1><A NAME="xterm_41">Patch #41 - 1997/5/28 - XFree86 3.2Xl</A></H1> Some nits found by Darren Hiebert (missing part of install-rule, incorrect assignment for --enable-color-mode option). <H1><A NAME="xterm_40">Patch #40 - 1997/5/26 - XFree86 3.2Xl</A></H1> Patch for the configure script's logic for obtaining imake predefined symbols. <H1><A NAME="xterm_39">Patch #39 - 1997/5/24 - XFree86 3.2Xl</A></H1> This patch does the following: <UL> <LI>integrate the 16-color change for 'xterm' <LI>minor fixes/clarification of tgetent in terminfo vs termcap to 'resize' </UL> (both changes also modify the configure script) <H1><A NAME="xterm_38">Patch #38 - 1997/5/22 - XFree86 3.2Xh</A></H1> This implements a simple configuration script with autoconf (to which I'll add more options later). It does the following: <UL> <LI>configures xterm to build with X11R5 (at least on SunOS 4.1, Solaris 2.4, possibly IRIX - sorry network was down today, but I did test an earlier version yesterday). <LI>enables/disables the configuration ifdef's for ANSI color and VT52 emulation. </UL> It does not make tests for the things that imake does (that's another project), instead it uses a hybrid of the autoconf tests for libraries and adds imake's compiler options (which are necessary in some cases to get main.c to compile). <H1><A NAME="xterm_37">Patch #37 - 1997/5/7 - XFree86 3.9a</A></H1> This corrects a minor, but annoying error in the vt220 emulation: the DECUDK is only supposed to be interpreted for _shifted_ function keys. <H1><A NAME="xterm_36">Patch #36 - 1997/1/16 - XFree86 3.2r</A></H1> This corrects something that I overlooked in patch #27 (21-aug-1996), which is that when trimming the region to be repainted for the highlightSelection resource of xterm, I still have to paint the background past the highlighted region. This only happens when I first do a selection in a window that's partly off-screen, then move the window on-screen. <H1><A NAME="xterm_35">Patch #35 - 1997/1/7 - XFree86 3.2o</A></H1> This patch does the following: <UL> <LI>combines the coding for foreground and background colors into a single byte, reducing the memory required to store saved-lines in color. (I'll take back that byte in a following patch to use to ensure the character-set, so there's no long-term decrease in memory use). <LI>modifies the PF1-PF4 coding in termcap/terminfo. Because xterm is still by default emulating vt100, the function key codes are vt100-compatible (I overlooked this in patch #31). I also reformatted the whole terminfo file into a single-column, for consistency. <LI>adds an interim xterm-vt220 description to accommodate the old and new styles of function-keys (though probably it'd be better to drop the old-style altogether). </UL> <H1><A NAME="xterm_34">Patch #34 - 1997/1/5 - XFree86 3.2o</A></H1> This patch does the following: <UL> <LI>implement DECSTR (soft terminal reset). The biggest diff is due to adding another state table (note that there's only one useful state here, but it's only 256 bytes rather than 1k as it would have been before I reduced the size of state entries). <LI>some minor tidying up (e.g., signed/unsigned use bitcpy, MODE_DECCKM, resetColor, resetCharsets). More is done in patch #35. </UL> I got the description of DECSTR from a vt420 user's manual. I'll do some testing with vttest to ensure that there's nothing else to do than what was documented. <H1><A NAME="xterm_33">Patch #33 - 1996/11/24 - XFree86 3.2</A></H1> This adds to the reset-fix by Matthieu Herrb <Mathieu.Herrb@mipnet.fr> a small change to make xterm able to output 8-bit characters in VT100 mode. Applications that run on real VT100's don't do that anyway, and this feature should be removed sometime after finishing off the VT220 emulation (VT220's can do 8-bit characters). That would be a good time to change the default terminal-id to 220. <H1><A NAME="xterm_32">Patch #32 - 1996/11/21 - XFree86 3.2</A></H1> This implements the REP (repeat) control for xterm. That isn't part of the DEC VTxxx series, but is defined in ISO 6429. (Note that the base xterm terminal description is <EM>not</EM> changed -- I added a variant, "xterm-rep"). <H1><A NAME="xterm_31">Patch #31 - 1996/11/16 - XFree86 3.2</A></H1> This implements vt52 emulation in xterm (ifdef'd so it can be removed). I've been using it for testing for the past month or so. <H1><A NAME="xterm_30">Patch #30 - 1996/11/16 - XFree86 3.2</A></H1> From bug-report by <auroux@clipper.ens.fr> (Denis Auroux), missing reset to ground state. I checked through the rest of <EM>that</EM> table and found another, in the unimplemented MC (screen print). <H1><A NAME="xterm_29">Patch #29 - 1996/9/15 - XFree86 3.1.2Gb</A></H1> This patch does the following: <UL> <LI>corrects the restoration of color for bold/underline color mode <LI>adds a resource 'decTerminalID' to control the reporting level of xterm (e.g., VT100, VT220). <LI>uses the new resource to implement/correct the DA1, DA2 and DECRPTUI reports. <LI>change valid-response code in DECRQSS from 0 to 1 (the manual says 0, but the VT420 terminal I've been testing on says 1). </UL> All of these changes are based on vttest 2.6 <P> (Most of the volume in the patch is to add 2 more state tables for parsing the 2nd/3rd device-attribute controls). <H1><A NAME="xterm_28">Patch #28 - 1996/8/31 - XFree86 3.1.2F</A></H1> This patch corrects the following reported by Roland Rosenfeld <roland@spinnaker.rhein.de>: <UL> <LI>handle SGR 22, 24 and 25 in combination with colorUL and colorBD resources. Also noted & fixed reset of colored underline/bold with SGR 0. <LI>a typo in the termcap (missing '['), from 3.1.2Dj (my error) </UL> Roland also complained that he couldn't use box characters with <PRE> -adobe-courier-bold-r-normal--12-120-75-75-m-70-iso8859-1 </PRE> but that's a known xterm limitation (the box characters must be part of the font, in the first 32 locations). <H1><A NAME="xterm_27">Patch #27 - 1996/8/21 - XFree86 3.1.2Ek</A></H1> This patch fixes one of my long-term gripes: xterm's selection doesn't clearly show what's being selected (as per David's request, it's controlled by a resource, which defaults to the older behavior). <H1><A NAME="xterm_26">Patch #26 - 1996/8/20 - XFree86 3.1.2Ei</A></H1> Here's a patch to fix a problem with xterm's cut/paste and another to modify the appearance of the highlighting while selecting. (The changes are independent, so you can see if the change to screen.c is desirable). <H1><A NAME="xterm_25">Patch #25 - 1996/8/18 - XFree86 3.1.2Ei</A></H1> Here's a correction for two minor bugs that I picked up in testing, plus some lint (from Solaris 2.5) where NULL was used incorrectly: <UL> <LI>make the second alternate font the same as the first (that's what vt420 and dtterm do) <LI>corrected DECSCL report when DECSCL hasn't been set (i.e., don't return a '60'). </UL> <H1><A NAME="xterm_24">Patch #24 - 1996/8/11 - XFree86 3.1.2Ee</A></H1> This patch does several things. In effect, xterm can (I think) do a reasonably good job of emulating vt220 and vt320 terminals (as well as it was doing vt100, at any rate ;-). <P> It does NOT do: <UL> <LI>soft fonts <LI>rigel or sixel graphics </UL> <P> Anyway, I: <UL> <LI>added ECH, CPL, CNL, SU, SD, CBT, CHT controls <LI>added popup-menu for switching between DEC and Sun function keys. (corrected alignment err wrt logging entry at that point). <LI>make xterm recognize both 8-bit and 7-bit controls (including popup menu for switching modes). <LI>add user-definable function keys (aka DECUDK) <LI>support concealed text <LI>support protected text (both ISO compatible and DEC compatible - that's not the same thing, btw), with SPA, EPA, DECSCA, DECSED, DECSEL controls. <LI>implement DECSCL. </UL> <P> I'll be continuing to test this patch for a while, but don't expect to add any new functionality (it passes all of the current tests I've built in vttest, but I need to make more tests).. <H1><A NAME="xterm_23">Patch #23 - 1996/7/31 - XFree86 3.1.2Ec</A></H1> This removes the blinking cursor I added last week (for performance reasons). Time-permitting, I'll revisit this after 3.2 is released (there <EM>will</EM> be more work after XFree86 3.2, I assume). <H1><A NAME="xterm_22">Patch #22 - 1996/7/26 - XFree86 3.1.2Ec</A></H1> I looked more closely at my "double-negative" and realized that I had been confused by the default color scheme (black on white) in combination with reverse video. However, I did see that the original_fg and original_bg data weren't really used - so I removed that logic. <P> Also: <UL> <LI>during initialization, check if ANSI colors are set with non fg/bg values, disable color mode if not. This makes xterm tolerant of applications that allocate the whole color map. <LI>implemented blinking cursor (default is <EM>off</EM>) </UL> <H1><A NAME="xterm_21">Patch #21 - 1996/7/24 - XFree86 3.1.2Ec</A></H1> This patch does the following: <UL> <LI>fixes some minor typography in the control-sequences documentation (it didn't occur to me til I'd sent the last patch that I could use ghostview for previewing the troff output ;-) <LI>adjusts the shell's background color in ReverseVideo so that flicker in resizing is reduced <LI>adds an ifdef OPT_ISO_COLORS to allow configuring xterm without the ISO color support (saves a lot of memory) <LI>used that ifdef to isolate/modify logic so that if the user doesn't have the colorMode enabled, then ISO color support is disabled (saving memory). <P> (If anyone needs numbers, I had savedLines set to 2000, and found a reduction from ~700k to ~400k of allocated memory, according to Purify). </UL> <H1><A NAME="xterm_20">Patch #20 - 1996/7/24 - XFree86 3.1.2Ec</A></H1> This documents the changes in control sequences for window operations that I added in my previous patch. I'm testing another patch that allows the user to use less memory if colors aren't needed. <H1><A NAME="xterm_19">Patch #19 - 1996/7/21 - XFree86 3.1.2Ec</A></H1> This patch does the following: <UL> <LI>fixes the core dump that I reported on IRIX 5.2 (in main.c) <P> (it's worth noting that this bug exists in X11R6.1, so I'd like to assume that someone's already submitted a fix to X Consortium...) <LI>change the interpretation of zero rows or columns in a resize-window request to use the root window's size (looking more carefully at dtterm, that seems to be what it does). <LI>change some memmove calls to memcpy for slightly better performance. (also, a couple of memset calls to bzero - Quantify says bzero runs 20% faster, I assume because there's one less argument). <LI>interpret character sets 1 and 2 (so that vttest gives a reasonable result) Both rxvt and dtterm do something equivalent. <LI>fix a minor memory leak in the logic that retrieves the window or icon names (Purify found this for me while I ran vttest). </UL> <H1><A NAME="xterm_18">Patch #18 - 1996/7/18 - XFree86 3.1.2Ec</A></H1> This implements the following: <UL> <LI>escape sequences that act like the CDE dtterm's window operations (though I have implemented the default width and height -- I've seen a rather buggy dtterm running that seems to treat width=0 or height=0 literally -- maybe that's a feature, not a bug?) <LI>minor tweak to the screen-repainting when resizing (I still cannot entirely get rid of flicker). <LI>still more fixes to terminfo & termcap (I corrected my error for the hpa code and added some other stuff by comparing to ncurses' description and rxvt's). <LI>a tweak to the patch by Michael Rohleder for the color translation <LI>re-order attribute codes to allow later implementation of protected fields (dtterm supposedly does this; it's probably more useful than blinking or invisible text -- that uses up all of the available bits without changing the attribute scheme radically). </UL> <H1><A NAME="xterm_17">Patch #17 - 1996/7/2 - XFree86 3.1.2Eb</A></H1> This patch implements for xterm several minor features from ISO 6429 which are useful for terminfo applications. The HPA and VPA control sequences allow cursor movement along a row or column, cutting down a little on the characters transmitted. The other codes allow resetting specific graphic rendition attributes without modifying the other attributes. (now if someone just had time to implement blinking cursors...) <H1><A NAME="xterm_16">Patch #16 - 1996/6/25 - XFree86 3.1.2Ea</A></H1> Adam Tla/lka <atlka@pg.gda.pl> told me a couple of weeks ago that I'd missed some of the background coloring in xterm. I investigated, and found that while I'd picked up on the clear-to-bottom and clear-to-end-of-line operations, I'd overlooked the insert/delete lines. Just so I wouldn't overlook any more of these, I updated a copy of vttest to test ISO colors and bce (background color erase). This patch introduces a new function, ClearCurBackground, whose calls replace the direct XClearArea calls that I'd overlooked. (There's also a few compiler warnings fixed, etc ;-) <H1><A NAME="xterm_15">Patch #15 - 1996/5/29 - XFree86 3.1.2E</A></H1> This fixes the problem reported by David Dawes, by making the 50msec select timeout for the Xaw3d arrow scrollbar a resource. (I made it a boolean for a variety of reasons -- to make it a number, you'd need an additional resource, to avoid breaking the logic). <H1><A NAME="xterm_14">Patch #14 - 1996/5/12 - XFree86 3.1.2Dj</A></H1> This patch brings the termcap and terminfo descriptions for xterm up to date. I made the following changes: <UL> <LI>reformatted the terminfo description in a single-column (this is ok for terminfo, and will simplify future patches -- can't do that for termcap, since it would impact buffer requirements on some systems). <LI>omitted obsolete features in termcap to save a little space (bs, pt) <LI>added color capabilities to termcap (ut, Co, NC, op, AB, AF) <LI>corrected some capabilities (vi, ve) <LI>added 'st' (set tab) <LI>reduced function keys in termcap for 'xterm' to 12 because color capabilities makes that description larger than 1023 characters. <LI>created new termcap name 'xtermm' (monochrome) to match the terminfo list, and make that description have 20 function keys. <LI>added corresponding color capabilities to terminfo (bce, colors, pairs, op, ncv, setab, setaf) <LI>corrected corresponding capabilities in terminfo (civis, cnorm, rmcup, smcup) <LI>added capabilities (el1, hts) <LI>in both, corrected home/end keys to match the code correction made by Thomas Mueller in 3.1.2Bk <P>=> (I'm still considering modifying the code & description to match the rxvt program). </UL> <H1><A NAME="xterm_13">Patch #13 - 1996/4/23 - XFree86 3.1.2Df</A></H1> This corrects my earlier changes for colors - the inner border of the xterm was getting painted with the wrong color, since I'd moved the call to set the background into the logic that tracks SGR information. <H1><A NAME="xterm_12">Patch #12 - 1996/3/16 - XFree86 3.1.2Dc</A></H1> This corrects a memory leak in xterm that happens whenever one switches fonts. <H1><A NAME="xterm_11">Patch #11 - 1996/3/5 - XFree86 3.1.2Db</A></H1> This patch corrects the behavior of the ANSI colors in xterm when reverse video is used, as well as some other lesser sins: <UL> <LI>button.c <UL> <LI>(compiler warnings: shadowing of 'time', redundant cast) </UL> <LI>charproc.c <UL> <LI>renamed screen.colors[] array to screen.Acolors[] to more easily distinguish the non-ANSI colors from the ANSI colors. <LI>moved logic of SGR_Save() into VTInitialize, getting rid of local private variables original_fg and original_bg. <LI>moved some logic into getXtermForeground and getXtermBackground from SGR_Foreground, SGR_Background, etc. <LI>corrected misleading 'row' to 'col' in case for CUF, CUB sequences. </UL> <LI>ctlseqs.ms <LI>xterm.man <UL> <LI>(correct a misconception which I'd added that the color0 through color6 resource values apply to non-ANSI colors) </UL> <LI>ptyx.h <UL> <LI>added original_fg, original_bg to TScreen structure. </UL> <LI>scrollbar.c <UL> <LI>(compiler warnings: redundant cast) </UL> <LI>util.c <UL> <LI>new functions getXtermForeground and getXtermBackground replace the macros GET_FG and GET_BG, with the added functionality of checking for the reverse-video status of xterm. <LI>in ReverseVideo, swap the SGR foreground and background colors also. </UL> </UL> <H1><A NAME="xterm_10">Patch #10 - 1996/2/14 - XFree86 3.1.2Cd</A></H1> I observed an occasional glitch in the xterm's color behavior; a clear to end of line would get a color that had been used in a program that supposedly reset colors. I traced this down to the way xterm was modifying colors of GC's on the fly; it didn't restore the original color of the GC, even though it would later be used in functions (such as ClearRight) that assumed (my error) that the GC would have the current foreground or background color. <P> I fixed this by resetting the GC's colors with a new function 'resetXtermGC()', and direct calls on SGR_Foreground/SGR_Background, as appropriate and using a new function 'updatedXtermGC()' to encapsulate the logic that modifies the GC's color. (I also removed some commented-out code that was trying to do this -- the problem was a little more obscure). <H1><A NAME="xterm_09">Patch #9 - 1996/2/10 - XFree86 3.1.2Cb</A></H1> This patch fixes the remaining problems that I had making xterm run with x11r5, as well as a couple of other bugs. It follows my patch from yesterday, that added ifdef's for some of the input-method resources. <UL> <LI>corrected ifdef's that suppress the input-method code (doesn't exist in my x11r5, and xterm works adequately without it). <LI>corrected fallback definition for 'Select()' macro (oops: I'd copied the wrong text...) <LI>moved the declarations for the fd_set variables to data.[ch] <LI>corrected an ifdef in resize.c (sunos 4.x doesn't have termcap.h) <LI>corrected (in main.c) some unused/orphaned variables. </UL> <H1><A NAME="xterm_08">Patch #8 - 1996/2/9 - XFree86 3.1.2Cb</A></H1> This is mostly a documentation patch for xterm. It describes the color control sequences in more detail, and documents some other features of xterm that aren't described elsewhere. <P> I've also added a couple of ifdef's to fix (part of) the problem that I'm working on (making the program work properly on x11r5, where I'm doing memory testing -- I have a "good" version from mid-January, but my resync version doesn't work properly on x11r5). I'm not done with <EM>that</EM> yet. <H1><A NAME="xterm_07">Patch #7 - 1996/1/28 - XFree86 3.1.2n</A></H1> I did a (clean) build of 3.1.2n on Linux 1.2.13 (ELF). I've got an S3 card. <P> This fixes the following in the 3.1.2n xterm: <UL> <LI>initialize cur_foreground, cur_background in charproc.c (Purify told me they weren't initialized). <LI>add interpretation of codes 39, 49, to reset background and foreground to default value (I'm told that ISO 6429 does this; but I don't have a written reference -- yet -- can anyone help here?). Anyway, rxvt does it, and it'll solve my remaining color management problems. <LI>shadowing of 'time' in menu.c <LI>'Cardinal' vs 'int' in scrollbar.c <LI>several changes to permit compile with X11R5 (the system that I've got Purify on won't be upgraded to X11R6 for a long time). </UL> <P> I built this version (with a minor nit that I'll patch soon) on SunOS 4.1.3 so that I can test it some more with Purify. <P> <EM>btw</EM>: the changes made in Xpoll.h won't work on some older systems, because fd_set isn't a defined type (I've got one machine at least that this applies to). <H1><A NAME="xterm_06">Patch #6 - 1996/1/8</A></H1> This patch does all of the SGR foreground/background fixes (i.e., clearing the screen after an SGR color is set causes that color to be used in the foreground and/or background). If the FG_COLOR and/or BG_COLOR flags aren't set, then the xterm foreground and background default to the window's values. This usage is consistent with various types of hardware (especially the IBM PC), and is also used in rxvt. <UL> <LI>charproc.c: <UL> <LI>add/use new macros GET_FG, GET_BG - n/c. <LI>add/use new functions SGR_Foreground() and SGR_Background() to set corresponding colors in GC's, and to retain sense of "original" colors. <P> => This makes redundant some of the corresponding logic in HideCursor to set the foreground and background, but I left it in since it <EM>may</EM> be fixing an unrelated requirement. <LI>set GC's in LoadNewFont() according to whether the SGR fg/bg colors are active. <P> => This fixes some glitches in the accompanying resize, that leaves parts of the window in the original background color. </UL> <LI>screen.c: <UL> <LI>modified ClearBufRows() to use the SGR fg/bg colors if they're set. <LI>added function ScrnClearLines(), used this to replace portions of ScrnInsertLine() and ScrnDeleteLine(). The new function uses the SGR fg/bg colors if they're set. <P> => Otherwise, selection after an index or reverse index will paint the wrong colors. <LI>modified ScrnDeleteChar() and ScrnInsertChar() to use SGR fg/bg colors. </UL> <LI>util.c: <UL> <LI>modified ClearRight() so that if either of the SGR fg/bg colors is set, we don't bzero the attributes and color arrays, but instead fill them with the appropriate codes. <LI>modified ClearLeft to use SGR fg/bg colors. </UL> </UL> <H1><A NAME="xterm_05">Patch #5 - 1996/1/7</A></H1> This patch modifies the object code, by replacing indexing expressions with temporary variables with the full indexing expression. At first glance, this seems inefficient (it did to me ;-), until remembering comments made in the compilers newsgroups that trying to "help" the compiler doesn't really work that well. A good optimizing compiler can do a better job than the programmer can. (There's a moral in the use of 'register' variables also, but I won't fix those...). <P> Anyway, the revised code generates a smaller object... <UL> <LI>charproc.c: <UL> <LI>recode index expressions in ShowCursor() and HideCursor() using SCRN_BUF_xxxxS macros - changes object. <LI>replace constant '4' by MAX_PTRS - n/c. </UL> <LI>ptyx.h: <UL> <LI>defined the SCRN_BUF_xxxxS macros in terms of BUF_xxxxS macros, to pick up references to ScrnBuf data directly, and added MAX_PTRS symbol to pick up those '4' constants strewn about the code - n/c. </UL> <LI>screen.c: <UL> <LI>recode index expressions in ScreenWrite() using SCRN_BUF_xxxxS macros - changes object. <LI>replace constant '4' by MAX_PTRS - n/c. <LI>use macros BUF_CHARS, BUF_ATTRS - n/c. <LI>cast calloc to 'Char *' to fix compiler warning on IRIX - n/c </UL> <LI>scrollbar.c: <UL> <LI>replace constant '4' by MAX_PTRS - n/c. <LI>cast calloc to 'Char *' to fix compiler warning on IRIX - n/c </UL> </UL> <H1><A NAME="xterm_04">Patch #4 - 1996/1/7</A></H1> When setting up for this phase, I saw that you'd corrected the bug that I found in ClearLeft. I decided to make this series of patches anyway, since readability never hurt (and there's the potential for finding another bug while reviewing this set). <UL> <LI>button.c: <UL> <LI>use SCRN_BUF_xxxxS macros - n/c </UL> <LI>charproc.c: <UL> <LI>use SCRN_BUF_xxxxS macros - n/c </UL> <LI>ptyx.h: <UL> <LI>added four macros: SCRN_BUF_CHARS, SCRN_BUF_ATTRS, SCRN_BUF_FORES, SCRN_BUF_BACKS to represent the four arrays that are derived from screen->buf. </UL> <LI>screen.c: <UL> <LI>use SCRN_BUF_xxxxS macros - n/c </UL> <LI>util.c: <UL> <LI>use SCRN_BUF_xxxxS macros - n/c </UL> </UL> <H1><A NAME="xterm_03">Patch #3 - 1996/1/7</A></H1> This is my third (and final cleanup) patch for xterm. It gets rid of the unused stuff, and converts several functions to static (thereby reducing their scope). <P> At this point, the only compile warnings I've got (on Linux) are those about the select arguments (int vs fd_set type), and a missing declaration for waitpid. Those both are hard to get right without autoconfigure. <P> The next patches will address the functional changes... <UL> <LI>Tekproc.c: <UL> <LI>changed several functions to 'static' that aren't used outside this module -- changes object </UL> <LI>charproc.c: <UL> <LI>changed several functions to 'static' that aren't used outside this module -- changes object <LI>deleted unused function unparsefputs -- changes object. </UL> <LI>main.c: <UL> <LI>changed several functions to 'static' that aren't used outside this module -- changes object <LI>ifdef'd out unused function 'consolepr()' -- changes object <LI>removed unused variable 'dummy_tio' -- changes object <LI>moved variable 'discipline' to quiet unused-warning -- changes object </UL> <LI>main.h: <UL> <LI>deleted unused definition of DEFBORDERWIDTH - n/c </UL> <LI>misc.c: <UL> <LI>changed several functions to 'static' that aren't used outside this module -- changes object <LI>provide dummy return statements for xerror and xioerror to quiet compiler warnings -- changes object </UL> <LI>ptyx.h: <UL> <LI>change sbuf_address and abuf_address to 'Char *' - n/c </UL> <LI>resize.c: <UL> <LI>changed several functions to 'static' that aren't used outside this module -- changes object </UL> <LI>screen.c: <UL> <LI>remove unnecessary 'Char **' casts - n/c </UL> <LI>util.c: <UL> <LI>changed several functions to 'static' that aren't used outside this module -- changes object </UL> </UL> <H1><A NAME="xterm_02">Patch #2 - 1996/1/7</A></H1> This is my second patch to xterm. It corrects most of the gcc warnings (except for some that are due to X header files ;-). I compared objects to keep track of the changes that don't affect the object code (n/c) versus those that do. <P> At this point, I'm compiling (fairly) clean with gcc options <PRE> -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wnested-externs </PRE> (I also compiled with -Wshadow, but while that found some things that I wanted to find, there's far too many warnings from the X headers to be usable in this context). <P> The changes: <UL> <LI>Tekproc.c: <UL> <LI>parenthesized expression to avoid gcc warning -- n/c. <LI>corrected nested-extern declaration for Bool waiting_for_initial_map; ourTopLevelShellArgs, and number_ourTopLevelShellArgs - n/c </UL> <LI>charproc.c: <UL> <LI>corrected potentially-unintialized variables 'scstype', 'xim', and 'input_style' -- changes object. <LI>adjusted logic of VTparse so that gcc won't warn about setjmp clobbering parsestate -- changes object. <LI>corrected initialization of 'scstype', which could have been clobbered by setjmp/longjmp - changes object. <LI>corrected nested-extern declaration of 'term', 'ProgramName' - n/c </UL> <LI>cursor.c: <UL> <LI>corrected nested-extern declaration of 'term' -- n/c <LI>renamed 'term' parameters to avoid gcc -Wshadow warning - n/c </UL> <LI>input.c: <UL> <LI>change interface of StringInput to assume size_t (i.e., unsigned) nbytes -- changes object. <LI>change interface of funcvalue, and sunfuncvalue to use 'KeySym' type instead of 'int' - changes object. </UL> <LI>main.c: <UL> <LI>moved definitions of SIGNAL_T, SIGNAL_RETURN to proto.h - n/c <LI>corrected missing params of 'do_hangup()' -- changes object (note: the missing params were not used). <LI>corrected missing param of 'Error()' -- changes object <LI>corrected nested-extern 'environ' - n/c <LI>adjusted assignments to 'tty_got_hung' and 'no_dev_tty' so that gcc can see they won't be clobbered by the longjmp - changes object. <LI>use Size_t type - n/c. </UL> <LI>menu.c: <UL> <LI>removed redundant prototype for 'do_hangup()' -- n/c. <LI>renamed 'time' parameters to avoid gcc -Wshadow warning - n/c </UL> <LI>menu.h: <UL> <LI>renamed 'time' parameters to avoid gcc -Wshadow warning - n/c </UL> <LI>misc.c: <UL> <LI>corrected definition of 'HandleFocusChange()' -- changes object <LI>cast parameters in call to 'TekExpose()' -- n/c <LI>corrected nested-extern declarations of 'term', 'toplevel', ProgramName, and 'environ' -- n/c. <LI>use Size_t type - n/c. </UL> <LI>proto.h: <UL> <LI>moved definition of SIGNAL_T (and SIGNAL_RETURN) here from main.c, resize.c to allow use of this symbol in prototypes (mostly in xterm.h). <LI>added definition 'Size_t' to use as corrected type for strncpy, malloc sizes - n/c. </UL> <LI>resize.c: <UL> <LI>moved SIGNAL_T definition to proto.h -- n/c. <LI>use Size_t type - n/c. </UL> <LI>screen.c: <UL> <LI>use Size_t type - n/c. </UL> <LI>tabs.c: <UL> <LI>corrected nested-extern declaration of 'term' -- n/c </UL> <LI>util.c: <UL> <LI>corrected/supplied parameters to 'TekExpose()' -- changes object (note: 'TekExpose()' doesn't use its parameters). <LI>corrected nested-extern declaration of 'waiting_for_initial_map' -- n/c. <LI>renamed 'term' parameters to avoid gcc -Wshadow warning - n/c </UL> <LI>xterm.h: <UL> <LI>prototype 'do_hangup()', 'HandleFocusChange()', 'TekExpose()', 'Error()', 'Exit()' - forces changes in various places. <LI>adjusted prototypes that pass 'Boolean' arguments to use 'int' (this is the "correct" ANSI approach to extended compiles; it's worth mentioning that gcc doesn't meet the ANSI spec here). I used gcc -Wconversion to find these, but there's a lot of unrelated warnings that are due to setting NARROWPROTO in the config - n/c. <LI>renamed 'term' parameters to avoid gcc -Wshadow warning - n/c </UL> </UL> <H1><A NAME="xterm_01">Patch #1 - 1996/1/6</A></H1> This is my first cleanup patch for xterm. It addresses all of the gcc warnings for -Wall, -Wmissing-prototypes and -Wstrict-prototypes that I can change without modifying the object code. (I'm compiling this with gcc 2.7.0 for an aout target, which makes it simple to compare objects. When I do ELF-only, I've got a tool that compares that sort of thing as well). <P> Briefly, this patch adds (and uses) two header files in the xterm directory: <PRE> proto.h xterm.h </PRE> I expect this to be the biggest patch by far. However (barring a misplaced prototype), it shouldn't break anything, since the intent of the patch is to provide missing declarations. </BODY> </HTML>