XCOMM platform: $XFree86: xc/config/cf/cygwin.cf,v 3.57 2003/12/24 18:58:41 dickey Exp $
#ifndef OSName
# define OSName Cygwin
#endif
#ifndef OSVendor
# define OSVendor Red Hat Inc.
#endif
#ifndef OSMajorVersion
# define OSMajorVersion DefaultOSMajorVersion
#endif
#ifndef OSMinorVersion
# define OSMinorVersion DefaultOSMinorVersion
#endif
#ifndef OSTeenyVersion
# define OSTeenyVersion DefaultOSTeenyVersion
#endif
#define ProjectRoot /usr/X11R6
/* We always want to enable server building */
#define BuildServer YES
#ifndef UnixCpp
# define UnixCpp
#endif
#if !CrossCompiling
# define HasGcc2 YES
#endif /* !CrossCompiling */
#define HasGcc2ForCplusplus YES
#define GccUsesGas YES
#define UseGas YES
#define GnuCpp YES
#define ExtraLoadFlags -Wl,--enable-auto-import
#define HasShadowPasswd NO
#define HasLibCrypt YES
#define HasPutenv YES
#define HasPoll NO
#if (OSMajorVersion > 1) || (OSMajorVersion == 1 && OSMinorVersion >= 5)
#define HasStrlcat YES
#endif
#ifndef UseCygIPC
# define UseCygIPC YES
#endif
#if UseCygIPC
# define HasShm YES
# define ServerExtraSysLibs -lcygipc
#else
# define HasShm NO
# define ServerExtraSysLibs /**/
#endif
#define HasSnprintf YES
#ifndef HasMakefileSafeInclude
# define HasMakefileSafeInclude YES
#endif
/*
* Cygwin has Tcl/Tk, but you need to keep the version numbers
* of the libs in sync. These version numbers may change
* occassionally.
*/
#define Hastcl YES
#define Hastk YES
#define TclLibName tcl80
#define TkLibName tk80
#define HasSockets YES
#define GzipFontCompression YES
#define HasZlib YES
#define GzipLibrary -lz.dll
/* We don't need -lm */
#define MathLibrary /**/
/*
* /lib/libtermcap.a doesn't have tgetent, which is needed for
* xc/programs/xterm/resize.exe
*/
#define TermcapLibrary -lncurses.dll
#define AvoidNullMakeCommand YES
#define StripInstalledPrograms YES
#define CompressAllFonts YES
#define Malloc0ReturnsNull NO
#define NeedConstPrototypes YES
#define NeedFunctionPrototypes YES
#define NeedNestedPrototypes YES
#define NeedVarargsPrototypes YES
#define NeedWidePrototypes NO
#define SetTtyGroup YES
#define ExpandManNames YES
#define HasDlopen NO
#define HasGnuMake YES
#define UseGccMakeDepend NO
#define ThreadedX YES
#define HasThreadSafeAPI YES
#define CaseSensitiveFileSystem NO
#define HasBasename NO /* basename() in libc */
#define LnCmd ln -s
#ifndef CcCmd
# define CcCmd gcc
#endif /* CcCmd */
#ifndef CplusplusCmd
# define CplusplusCmd g++
#endif /* CplusplusCmd */
#ifndef AsCmd
# define AsCmd as
#endif /* AsCmd */
#define GccGasOption -DGCCUSESGAS
#define AsmDefines -DUSE_GAS -DGCCUSESGAS
#ifndef LdCmd
# define LdCmd gcc -lautomode
#endif /* LdCmd */
#define MkdirHierCmd mkdir -p
#ifndef CppCmd
# define CppCmd cpp
#endif /* CppCmd */
#ifndef YaccCmd
# define YaccCmd byacc
#endif /* YaccCmd */
#define LexCmd flex -l
#define LexLib -lfl
#define HasFlex YES
#define HasExpat YES
/*
* Cygwin-specific Windows resource compiler command
*/
#ifdef CrossCompileDir
# ifndef WindresCmd
# define WindresCmd Concat3(CrossCompileDir,/,windres)
# endif
#else
# ifndef WindresCmd
# define WindresCmd windres
# endif
#endif
#define PreProcessCmd CcCmd -E
#ifndef PostIncDir
# ifdef CrossCompileDir
# define PostIncDir `CrossCompileDir/CcCmd --print-libgcc-file-name | sed 's,\\\\,/,g' | sed 's,libgcc.a,include,'`
# else
# define PostIncDir `CcCmd --print-libgcc-file-name | sed 's,\\\\,/,g' | sed 's,libgcc.a,include,'`
# endif
#endif
#ifndef ExtraIncDir
# ifdef CrossCompileDir
# define ExtraIncDir CrossCompileDir/../include/w32api
# else
# define ExtraIncDir /usr/include/w32api
# endif
#endif
#define LdCombineFlags -r
/*
* We do not define -ansi yet as newlib (which is Cygwin's library) does not
* define some needed prototypes when -ansi is set, when that is fixed
* we can remove these lines and use the default XFree86 options.
*/
#ifndef DefaultCCOptions
# define DefaultCCOptions /* -ansi -pedantic */ GccWarningOptions
#endif
/*
* Cygwin 1.5.x now includes alloca
*/
#if OSMinorVersion >= 5
# define AllocateLocalDefines -DINCLUDE_ALLOCA_H
#else
# define AllocateLocalDefines -DNO_ALLOCA
#endif
#ifndef OptimizedCDebugFlags
# define OptimizedCDebugFlags DefaultGcc2i386Opt
#endif
#define StandardDefines -D__i386__ -DWIN32_LEAN_AND_MEAN -DX_LOCALE \
-D_X86_ -D__CYGWIN__ -D_XOPEN_SOURCE \
-D_POSIX_C_SOURCE=199309L -D_BSD_SOURCE \
-D_SVID_SOURCE -D_GNU_SOURCE
#define XawI18nDefines -DHAS_WCHAR_H -DHAS_WCTYPE_H \
-DHAS_ISW_FUNCS -DNO_WIDEC_H
#define HasWChar32 YES
#define StandardCppOptions -traditional
/*
* Cygwin only has shared memory support when using the cygipc package,
* or the newer cygserver package.
*/
#if UseCygIPC
# if ThreadedX
# define StandardCppDefines -DHAS_THREADS -DHAS_SHM StandardDefines
# else
# define StandardCppDefines -DHAS_SHM StandardDefines
# endif
#else
# if ThreadedX
# define StandardCppDefines -DHAS_THREADS StandardDefines
# else
# define StandardCppDefines StandardDefines
# endif
#endif
/*
* Do not use XFree86ServerDefines here because it always defines
* XFree86Server. Defining XFree86Server causes fb to not expose its
* fbSetVisualTypesAndMasks. Instead, we create a local
* XWinServerDefines, which has everything that XFree86ServerDefines
* has in it, but it allows us to easily remove the XFree86Server
* define for experimental development purposes.
*/
#define XWinServerDefines -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH \
XFree86DGADefines XFree86XvDefines \
XFree86LoaderDefines -DXFree86Server \
VidModeExtensionDefines \
XFree86XvMCDefines \
SmartScheduleDefines \
DebugDefines XFree86XResDefines \
-DX_BYTE_ORDER=$(X_BYTE_ORDER)
#define ServerOSDefines XWinServerDefines \
-DDDXTIME -DFD_SETSIZE=256 -DDDXOSINIT \
-DDDXOSVERRORF -DDDXOSFATALERROR
#define XkbServerDefines -DXKB_ALWAYS_USES_SOFT_REPEAT
#define ServerExtraDefines -DGCCUSESGAS XWinServerDefines \
AllocateLocalDefines
#define ConnectionFlags -DTCPCONN -DUNIXCONN
#define ExtraLibraries
#define InstUidFlags -m 4711
#define UseRgbTxt YES
#define ExtraFilesToClean *.obj *.orig *.rej junk.c *.exe *.dll *.lib *~
/* IPv6 not yet supported */
#ifndef BuildIPv6
# define BuildIPv6 NO
#endif
/*
* You'll probably want BuildDebug to be YES if you are debugging :)
*/
#define BuildDebug NO
#define XFree86Devel NO
/*
* Xinerama is multiple monitor support and will require special code,
* if it even makes sense to enable such a beast in Cygwin/XFree86.
*/
#define BuildXinerama NO
/*
* PEX and XIE were deprecated on 2001-05-29, as Keith Packard says,
* "they are so broken as to be unusable in real applications," furthermore,
* "neither PEX nor XIE have seen any development for almost a decade".
*
* XIE is the X Image Extension Protocol, not to be confused with
* XInputExt, which is the X Input Extension.
*/
#define BuildPexExt NO
#define BuildXIE NO
/*
* Rush is a non standard extension for cooperation between the glide
* library and the X server. Cygwin/XFree86 will never need Rush,
* as all graphics requests are processed through GDI or DirectDraw.
*/
#define BuildXF86RushExt NO
/*
* DPMS is the Display Power Management System. Cygwin/XFree86 doesn't
* own the display hardware, Windows does, so it doesn't make sense
* for Cygwin/XFree86 to try to provide power management.
*/
#define BuildDPMS NO
#define BuildDPMSExt NO
#define DPMSDefines /**/
#define BuildGlxExt YES
#define BuildXInputExt YES
#define BuildXF86VidModeExt NO
#define BuildXF86DGA NO /* No direct access to hardware */
#define BuildXvExt YES
#define BuildXF86MiscExt NO
#define BuildRender YES
#define BuildRandR NO
#define BuildXF86DRI NO /* No direct access to hardware */
#define BuildXF86DRM NO /* No direct access to hardware */
#define BuildXKB YES
#define BuildXCMiscExt YES
#define BuildTestExt YES
#define BuildMITMiscExt YES
#define BuildSyncExt YES
#define BuildBigReqsExt YES
#define BuildEVI YES
#define BuildXF86BigfontExt YES
#define BuildRECORD YES
#define BuildDBE YES
#define BuildFontCache YES
#define BuildLBX YES
#define BuildCup YES
#define BuildXCSecurity YES
#define BuildAppgroup YES
#define BuildShapeExt YES
#define BuildScanpci NO /* No direct access to hardware */
#define BuildScreenSaverExt NO
#define BuildWindowsWMLibrary YES
/*
* What is Plugin?
*/
#define BuildPlugin NO
/*
* Doing a loadable server would probably take some extra work.
*/
#define DoLoadableServer NO
/*
* Don't build the XFree86 server
*/
#define XF86Server NO
/*
* Try to avoid building anything related to graphics cards
*/
#define XFShadowFB NO
#define XF24_32Bpp NO
#define XF8_16Bpp NO
#define XF8_32Bpp NO
#define XF4Bpp NO
#define XF1Bpp NO
#define XF86VgaHw NO
#define XF86FBDevHw NO
#define XF86XAA NO
#define XF86Ramdac NO
#define XF86I2C NO
#define XF86DDC NO
#define XF86RAC NO
#define XF86Int10 NO
#define XF86AFB NO
#define XF86CardDrivers /**/
/* Server build rules */
#ifndef XnestServer
# define XnestServer YES
#endif
#ifndef BuildXprint
# define BuildXprint YES
#endif
#ifndef XprtServer
# define XprtServer YES
#endif
#ifndef XVirtualFramebufferServer
# define XVirtualFramebufferServer YES
#endif
#define XWinServer YES
/*
* We need libX11 and libXext for the X11 Server
*/
#if XWinServer
# define BuildX11Lib YES
# define BuildXextLib YES
#endif
/*
* 2001-06-19 - SmartScheduler is terribly slow on Cygwin. It causes
* visible delays in updating of windows, cursor position, etc.
*/
#define UseSmartScheduler NO
/*
* --unix option of Cygwin make fools the standard MakeFlagsToShellFlags macro
*/
#define MakeFlagsToShellFlags(makeflags,shellcmd) \
for flag in ${MAKEFLAGS} ''; do \ @@\
case "$$flag" in *=*) ;;--*) ;; *[makeflags]*) shellcmd;; esac; done
#include <cygwin.rules>
#include <xfree86.cf>