idVendor: 0x0D46 iManufacturer: KOBIL Systems idProduct: 0x3010 iProduct: KOBIL Class 3 Reader bcdDevice: 0.39 (firmware release?) bLength: 9 bDescriptorType: 4 bInterfaceNumber: 0 bAlternateSetting: 0 bNumEndpoints: 3 bulk-IN, bulk-OUT and Interrupt-IN bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)] bInterfaceSubClass: 0 bInterfaceProtocol: 0 bulk transfer, optional interrupt-IN (CCID) iInterface: ? CCID Class Descriptor bLength: 0x36 bDescriptorType: 0x21 bcdCCID: 1.00 bMaxSlotIndex: 0x00 bVoltageSupport: 0x01 5.0V dwProtocols: 0x0000 0x0003 T=0 T=1 dwDefaultClock: 2.000 MHz dwMaximumClock: 4.000 MHz bNumClockSupported: 0 (will use whatever is returned) IFD does not support GET CLOCK FREQUENCIES request: No such file or directory dwDataRate: 10573 bps dwMaxDataRate: 344086 bps bNumDataRatesSupported: 0 (will use whatever is returned) IFD does not support GET_DATA_RATES request: No such file or directory dwMaxIFSD: 254 dwSynchProtocols: 0x00000000 dwMechanical: 0x00000000 No special characteristics dwFeatures: 0x000406BA ....02 Automatic parameter configuration based on ATR data ....08 Automatic ICC voltage selection ....10 Automatic ICC clock frequency change according to parameters ....20 Automatic baud rate change according to frequency and Fi, Di params ....80 Automatic PPS made by the CCID ..02.. NAD value other than 00 accepted (T=1) ..04.. Automatic IFSD exchange as first exchange (T=1) 04.... Short and Extended APDU level exchange dwMaxCCIDMessageLength: 536 bytes bClassGetResponse: 0xFF echoes the APDU class bClassEnveloppe: 0xFF echoes the APDU class wLcdLayout: 0x0210 16 lines 2 characters per line bPINSupport: 0x03 PIN Verification supported PIN Modification supported bMaxCCIDBusySlots: 1