idVendor: 0x0D46 iManufacturer: KOBIL idProduct: 0x3001 iProduct: KAAN Base bcdDevice: 1.19 (firmware release?) bLength: 9 bDescriptorType: 4 bInterfaceNumber: 0 bAlternateSetting: 0 bNumEndpoints: 3 bulk-IN, bulk-OUT and Interrupt-IN bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)] bInterfaceSubClass: 0 bInterfaceProtocol: 0 bulk transfer, optional interrupt-IN (CCID) iInterface: 0 CCID Class Descriptor bLength: 0x36 bDescriptorType: 0x21 bcdCCID: 1.00 bMaxSlotIndex: 0x00 bVoltageSupport: 0x07 5.0V 3.0V 1.8V dwProtocols: 0x0000 0x0003 T=0 T=1 dwDefaultClock: 4.800 MHz dwMaximumClock: 4.800 MHz bNumClockSupported: 0 (will use whatever is returned) wrong size for GET CLOCK FREQUENCIES: 1 dwDataRate: 12903 bps dwMaxDataRate: 412903 bps bNumDataRatesSupported: 0 (will use whatever is returned) wrong size for GET_DATA_RATES: 1 dwMaxIFSD: 254 dwSynchProtocols: 0x00000007 2-wire protocol 3-wire protocol I2C protocol dwMechanical: 0x00000000 No special characteristics dwFeatures: 0x000406BA ....02 Automatic parameter configuration based on ATR data ....08 Automatic ICC voltage selection ....10 Automatic ICC clock frequency change according to parameters ....20 Automatic baud rate change according to frequency and Fi, Di params ....80 Automatic PPS made by the CCID ..02.. NAD value other than 00 accepted (T=1) ..04.. Automatic IFSD exchange as first exchange (T=1) 04.... Short and Extended APDU level exchange dwMaxCCIDMessageLength: 432 bytes bClassGetResponse: 0xFF echoes the APDU class bClassEnveloppe: 0xFF echoes the APDU class wLcdLayout: 0x0000 bPINSupport: 0x00 bMaxCCIDBusySlots: 1