WHAT=windows

all:: setup-msg outpre-dir

all:: all-$(WHAT)
clean:: clean-$(WHAT)
install:: install-$(WHAT)
check:: check-$(WHAT)

all-windows::
clean-windows::
install-windows::
check-windows::

all-windows:: Makefile
clean-windows:: Makefile

#
# Figure out the CPU
#
!if !defined(CPU) || "$(CPU)" == ""
CPU=$(PROCESSOR_ARCHITECTURE)
!endif # CPU

!if "$(CPU)" == ""
CPU=i386
!endif

# Change x86 or X86 to i386
!if ( "$(CPU)" == "X86" ) || ( "$(CPU)" == "x86" )
CPU=i386
!endif # CPU == X86

!if ( "$(CPU)" != "i386" ) && ( "$(CPU)" != "ALPHA" ) && ( "$(CPU)" != "ALPHA64" ) && ( "$(CPU)" != "IA64" ) && ( "$(CPU)" != "AMD64" )
!error Must specify CPU environment variable ( CPU=i386, CPU=ALPHA, CPU=ALPHA64,CPU=IA64, CPU=AMD64)
!endif
#
# End of figuring out CPU
#

!if "$(OS)" == "Windows_NT"
DIRNUL=
!else 
DIRNUL=\nul
!endif

# NOTE: ^ is an escape char for NMAKE.
!ifdef NODEBUG
OUTPRE_DBG=rel
!else
OUTPRE_DBG=dbg
!endif
OUTPRE1=obj
OUTPRE2=$(OUTPRE1)\$(CPU)
OUTPRE3=$(OUTPRE2)\$(OUTPRE_DBG)
OUTPRE=$(OUTPRE3)^\

$(OUTPRE3)$(DIRNUL):
	-@if not exist $(OUTPRE1)$(DIRNUL) mkdir $(OUTPRE1)
	-@if not exist $(OUTPRE2)$(DIRNUL) mkdir $(OUTPRE2)
	-@if not exist $(OUTPRE3)$(DIRNUL) mkdir $(OUTPRE3)
	@if exist $(OUTPRE3)$(DIRNUL) echo Output going into $(OUTPRE3)
	@if not exist $(OUTPRE1)$(DIRNUL) echo The directory $(OUTPRE1) could not be created.
	@if exist $(OUTPRE1)$(DIRNUL) if not exist $(OUTPRE2)$(DIRNUL) echo The directory $(OUTPRE2) could not be created.
	@if exist $(OUTPRE2)$(DIRNUL) if not exist $(OUTPRE3)$(DIRNUL) echo The directory $(OUTPRE3) could not be created.


clean-windows-dir::
	-@if exist $(OUTPRE3)$(DIRNUL) rmdir $(OUTPRE3)
	-@if exist $(OUTPRE2)$(DIRNUL) rmdir $(OUTPRE2)
	-@if exist $(OUTPRE1)$(DIRNUL) rmdir $(OUTPRE1)
	@if exist $(OUTPRE2)$(DIRNUL) echo The directory $(OUTPRE2) is not empty.
	@if not exist $(OUTPRE2)$(DIRNUL) if exist $(OUTPRE1)$(DIRNUL) echo The directory $(OUTPRE1) is not empty.

# Directory syntax:
#
# begin absolute path
ABS=^\
# begin relative path
REL=
# up-directory
U=..
# path separator
S=^\
# this is magic... should only be used for preceding a program invocation
C=.^\

srcdir = .
SRCTOP = $(srcdir)\$(BUILDTOP)

!if defined(KRB5_USE_DNS) || defined(KRB5_USE_DNS_KDC) || defined(KRB5_USE_DNS_REALMS)
!if defined(KRB5_NO_WSHELPER)
DNSMSG=resolver
!else
DNSMSG=wshelper
DNSFLAGS=-DWSHELPER=1
!endif
!if !defined(DNS_INC)
!message Must define DNS_INC to point to $(DNSMSG) includes dir!
!error
!endif
!if !defined(DNS_LIB)
!message Must define DNS_LIB to point to $(DNSMSG) library!
!error
!endif
DNSLIBS=$(DNS_LIB)
DNSFLAGS=-I$(DNS_INC) $(DNSFLAGS) -DKRB5_DNS_LOOKUP=1
!if defined(KRB5_USE_DNS_KDC)
DNSFLAGS=$(DNSFLAGS) -DKRB5_DNS_LOOKUP_KDC=1
!endif
!if defined(KRB5_USE_DNS_REALMS)
DNSFLAGS=$(DNSFLAGS) -DKRB5_DNS_LOOKUP_REALM=1
!endif
!else
DNSLIBS=
DNSFLAGS=
!endif

!if ("$(CPU)" == "i386")
TIME_T_FLAGS=-D_USE_32BIT_TIME_T
!endif

!if defined(KRB5_KFW_COMPILE)
KFWFLAGS=-DUSE_LEASH=1
!endif

#
# The name of the C compiler for the target
#
CC=cl

PDB_OPTS=-Fd$(OUTPRE)\ -FD
CPPFLAGS=-I$(SRCTOP)\include -I$(SRCTOP)\include\krb5 $(DNSFLAGS) -DKRB5_PRIVATE=1 -DWIN32_LEAN_AND_MEAN -DKRB5_DEPRECATED=1 -D_CRT_SECURE_NO_DEPRECATE $(KFWFLAGS) $(TIME_T_FLAGS)
CCOPTS=-nologo /W3 $(PDB_OPTS) $(DLL_FILE_DEF)
LOPTS=-nologo -incremental:no

!if  ("$(CPU)" == "IA64" ) || ("$(CPU)" == "AMD64" ) || ("$(CPU)" == "ALPHA64" )
CCLINKOPTION=/link bufferoverflowu.lib
SCLIB=bufferoverflowu.lib
DEBUGOPT=/Zi
!else
CCLINKOPTION=
SCLIB=
DEBUGOPT=/ZI
!endif

#if the compiler is vstudio 8, generate manifest
!if exists("$(VCINSTALLDIR)\..\..\MICROSOFT VISUAL STUDIO 8")
CCLINKOPTION = $(CCLINKOPTION) /MANIFEST
_VC_MANIFEST_EMBED_EXE = if exist $*.exe.manifest mt.exe -manifest $*.exe.manifest -outputresource:$*.exe;1
_VC_MANIFEST_EMBED_DLL = if exist $*.dll.manifest mt.exe -manifest $*.dll.manifest -outputresource:$*.dll;2
!endif 

# /ZI gives better debug info in each object file (MSVC 6.0 or higher).
# /Zi gives debug info in each object file.
# /Gs Avoid stack probes (they don't seem to work anyway)
# /Os optimize for space.  FIXME:  Do not use /Ox; it miscompiles the DES lib!
# /Od disable optimization (for debugging)
# /MD (Win32) thread safe, ML would be single threaded, don't build with ML

#
# CCOPTS  was for DLL compiles
# CCOPTS2 was for non-DLL compiles (EXEs, for example)
#
!ifdef NODEBUG
!ifdef DEBUG_SYMBOL
CCOPTS=$(DEBUGOPT) $(CCOPTS)
LOPTS=$(LOPTS) -debug
!endif
CCOPTS=/Os /MD $(CCOPTS)
LOPTS=$(LOPTS)
!else
CCOPTS=/Od $(DEBUGOPT) /MDd $(CCOPTS)
LOPTS=$(LOPTS) -debug
!endif

# XXX - NOTE: We should probably use DllMainCRTStartup
DLL_LINKOPTS=$(LOPTS) -dll -entry:DllMain
EXE_LINKOPTS=$(LOPTS)

RM=$(BUILDTOP)\config\rm.bat
LIBECHO=$(BUILDTOP)\util\windows\$(OUTPRE)libecho
CP=copy/b nul:+
MV=ren
LN=copy
LIBCMD=lib
AWK=rem
RC = rc
CVTRES = cvtres

WCONFIG_EXE=$(BUILDTOP)\$(OUTPRE)wconfig.exe
WCONFIG=$(WCONFIG_EXE:.exe=) $(WCONFIG_FLAGS)

CLIB=$(BUILDTOP)\lib\$(OUTPRE)comerr32.lib
PLIB=$(BUILDTOP)\lib\$(OUTPRE)xpprof32.lib
KLIB=$(BUILDTOP)\lib\$(OUTPRE)krb5_32.lib
K4LIB=$(BUILDTOP)\lib\$(OUTPRE)krb4_32.lib
SLIB=$(BUILDTOP)\lib\$(OUTPRE)k5sprt32.lib
GLIB=$(BUILDTOP)\lib\$(OUTPRE)gssapi32.lib
WLIB=

!if  ("$(CPU)" == "IA64" ) || ("$(CPU)" == "AMD64" ) || ("$(CPU)" == "ALPHA64" )
CLIB=$(BUILDTOP)\lib\$(OUTPRE)comerr64.lib
PLIB=$(BUILDTOP)\lib\$(OUTPRE)xpprof64.lib
KLIB=$(BUILDTOP)\lib\$(OUTPRE)krb5_64.lib
K4LIB=$(BUILDTOP)\lib\$(OUTPRE)krb4_64.lib
SLIB=$(BUILDTOP)\lib\$(OUTPRE)k5sprt64.lib
GLIB=$(BUILDTOP)\lib\$(OUTPRE)gssapi64.lib
WLIB=

!endif

KRB4_INCLUDES=-I$(BUILDTOP)/include/kerberosIV

COM_ERR_DEPS	= $(BUILDTOP)/include/com_err.h

ARADD=rem
RANLIB=rem
ARCHIVE=rem

LIBEXT=lib
OBJEXT=obj
EXEEXT=.exe

MFLAGS=$(MAKEFLAGS)
!ifdef MIGNORE
MAKE=-$(MAKE)
!endif

CFLAGS = $(CCOPTS)
ALL_CFLAGS = $(DEFS) $(DEFINES) $(LOCALINCLUDES) $(CPPFLAGS) $(CFLAGS)

C_RULE_STUFF=$(CC) $(ALL_CFLAGS) -Fo$(OUTPRE)\ -c
C_RULE_PRINT=$(C_RULE_STUFF)
C_RULE=$(C_RULE_STUFF) $<

{}.rc{$(OUTPRE)}.res:
	$(RC) $(RCFLAGS) -fo $@ -r $<

{}.c{$(OUTPRE)}.obj:
	@if "%DO_C_RULE_PRINT%"=="1" echo %C_RULE_PRINT% ...
	@set DO_C_RULE_PRINT=
	@$(C_RULE)

{}.cxx{$(OUTPRE)}.obj:
	@if "%DO_C_RULE_PRINT%"=="1" echo %C_RULE_PRINT% ...
	@set DO_C_RULE_PRINT=
	@$(C_RULE)

{}.cpp{$(OUTPRE)}.obj:
	@if "%DO_C_RULE_PRINT%"=="1" echo %C_RULE_PRINT% ...
	@set DO_C_RULE_PRINT=
	@$(C_RULE)

#
# End of Win32 pre-config lines (config/win-pre.in)
#