/* * Copyright (c) 2002 Apple Computer, Inc. All rights reserved. * * @APPLE_LICENSE_HEADER_START@ * * This file contains Original Code and/or Modifications of Original Code * as defined in and that are subject to the Apple Public Source License * Version 2.0 (the 'License'). You may not use this file except in * compliance with the License. Please obtain a copy of the License at * http://www.opensource.apple.com/apsl/ and read it before using this * file. * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. * Please see the License for the specific language governing rights and * limitations under the License. * * @APPLE_LICENSE_HEADER_END@ */ #ifndef _IOPMLibPrivate_h_ #define _IOPMLibPrivate_h_ #include <TargetConditionals.h> #include <IOKit/IOKitLib.h> #include <CoreFoundation/CFArray.h> #include <IOKit/pwr_mgt/IOPMLibDefs.h> #include <IOKit/pwr_mgt/IOPM.h> #include <IOKit/pwr_mgt/IOPMLib.h> #include <sys/cdefs.h> __BEGIN_DECLS /*! * @constant kIOPBundlePath * @abstract c-string path to powerd.bundle */ #define kIOPMBundlePath "/System/Library/CoreServices/powerd.bundle" /*! * @constant kIOPMSystemPowerStateNotify * @abstract Notify(3) string that PM fires every time the system begins a sleep, wake, or a maintenance wake. * @discussion The notification fires at the "system will" notificatin phase; e.g. at the beginning of the sleep or wake. * Unless you have a strong need for this asynchronous sleep/wake notification, you * should really be using IOPMConnectionCreate(). */ #define kIOPMSystemPowerStateNotify "com.apple.powermanagement.systempowerstate" /*! * @constant kIOPMSystemPowerCapabilitiesKeySuffix * @abstract SCDynamicStoreKey location where the system state capability can be found. * @discussion This state is always updated immediately prior to when PM delivers * the notify (3) notification kIOPMSystemPowerStateNotify * The System power capabilities are defined by the * enum <code>@link IOPMCapabilityBits@/link</code> below. */ #define kIOPMSystemPowerCapabilitiesKeySuffix "/IOKit/SystemPowerCapabilities" /*! @define kIOUserActivityNotifyName @abstract The notification by this name fires when User activity state on the system changes. @discussion Pass this string as an argument to register via notify(3). You can query User activity state via notify_get_state() when this notification fires. The returned value will be either kIOUserIsIdle or kIOUserIsActive */ enum { kIOUserIsIdle = 0, kIOUserIsActive = 1 }; #define kIOUserActivityNotifyName "com.apple.powermanagement.useractivity" /*! @define kIOUserAssertionReSync @abstract This is the Notify(3) string fired by powerd every time the process is started. */ #define kIOUserAssertionReSync "com.apple.powermanagement.assertionresync" /*! @define kIOPMDarkWakeControlEntitlement * @abstract Apple internal entitlement for processes that may influence * DarkWake policy. */ #define kIOPMDarkWakeControlEntitlement CFSTR("com.apple.private.iokit.darkwake-control") /*! @define kIOPMDarkWakeControlEntitlement * @abstract Apple internal entitlement for processes that receive Interactive Push notifications. */ #define kIOPMInteractivePushEntitlement CFSTR("com.apple.private.iokit.interactive-push") /*! * @constant kIOPMServerBootstrapName * @abstract Do not use. There's no reason for any code outside of PowerManagement to use this. * @discussion The PM system server registers via this key with launchd. */ #define kIOPMServerBootstrapName "com.apple.PowerManagement.control" /*! * @group AutoWake API * @abstract For internal use communicating between IOKitUser and PM configd */ /*! * @constant kIOPMAutoWakePresPath * @abstract Filename of the scheduled power events file. */ #define kIOPMAutoWakePrefsPath "com.apple.AutoWake.xml" /* * @constant kIOPMAutoWakeScheduleImmediate * @abstract Internal only argument to <code>@link IOPMSchedulePowerEvent@/link</code> * for use only by debugging tools. * @discussion Once scheduled, these types are not cancellable, nor will they appear in any lists of * scheduled arguments from IOPMCopyScheduledEvents. These are not acceptable * types to pass as Repeating events. * * The 'date' argument to IOPMSchedulePowerEvent is an absolute one for * 'AutoWakeScheduleImmediate' and 'AutoPowerScheduleImmediate'. The effect * of these WakeImmediate and PowerOnImmediate types is to schedule the * wake/power event directly with the wake/power controller, ignoring all OS * queueing and management. This will override a previously scheduled wake event * by another application, should one exist. Recommended for testing only. */ #define kIOPMAutoWakeScheduleImmediate "WakeImmediate" /* * @constant kIOPMAutoPowerScheduleImmediate * @abstract Internal only argument to <code>@link IOPMSchedulePowerEvent@/link</code> * for use only by debugging tools. * @discussion Once scheduled, these types are not cancellable, nor will they appear in any lists of * scheduled arguments from IOPMCopyScheduledEvents. These are not acceptable * types to pass as Repeating events. * * The 'date' argument to IOPMSchedulePowerEvent is an absolute one for * 'AutoWakeScheduleImmediate' and 'AutoPowerScheduleImmediate'. The effect * of these WakeImmediate and PowerOnImmediate types is to schedule the * wake/power event directly with the wake/power controller, ignoring all OS * queueing and management. This will override a previously scheduled wake event * by another application, should one exist. Recommended for testing only. * * */ #define kIOPMAutoPowerScheduleImmediate "PowerOnImmediate" /*! * @constant kIOPMSchedulePowerEventNotification * @abstract Notification posted when IOPMSchedulePowerEvent successfully schedules a power event * @discussion i.e. this notify(3) notification fires every time the list of scheduled power events changes. */ #define kIOPMSchedulePowerEventNotification "com.apple.system.IOPMSchedulePowerEventNotification" /* * @constant kIOPMAutoWakeRelativeSeconds * @abstract Internal only argument to <code>@link IOPMSchedulePowerEvent@/link</code> * for use only by debugging tools. * @discussion The 'date' argument to IOPMSchedulePowerEvent is an relative one to "right now," * when passing type for 'kIOPMSettingDebugWakeRelativeKey' or 'kIOPMAutoPowerRelativeSeconds' * * e.g. In this case, we're setting the system to wake from sleep exactly 10 * seconds after the system completes going to sleep. We're passing in a date * 10 seconds past "right now", but the wakeup controller interprets this as * relative to sleep time. * * d = CFDateCreate(0, CFAbsoluteGetCurrent() + 10.0); * IOPMSchedulePowerEvent(d, CFSTR("SleepCycler"), CFSTR(kIOPMAutoWakeRelativeSeconds) ); */ #define kIOPMAutoWakeRelativeSeconds kIOPMSettingDebugWakeRelativeKey /* * @constant kIOPMAutoPowerRelativeSeconds * @abstract Internal only argument to <code>@link IOPMSchedulePowerEvent@/link</code> * for use only by debugging tools. * @discussion The 'date' argument to IOPMSchedulePowerEvent is an relative one to "right now," * when passing type for 'kIOPMSettingDebugWakeRelativeKey' or 'kIOPMAutoPowerRelativeSeconds' * * e.g. In this case, we're setting the system to wake from sleep exactly 10 * seconds after the system completes going to sleep. We're passing in a date * 10 seconds past "right now", but the wakeup controller interprets this as * relative to sleep time. * * d = CFDateCreate(0, CFAbsoluteGetCurrent() + 10.0); * IOPMSchedulePowerEvent(d, CFSTR("SleepCycler"), CFSTR(kIOPMAutoWakeRelativeSeconds) ); */ #define kIOPMAutoPowerRelativeSeconds kIOPMSettingDebugPowerRelativeKey #pragma mark Private Assertions /************************************************** * * Private assertions * **************************************************/ /*! * @group Private Assertions */ /*! * @constant kIOPMAssertionTypeApplePushServiceTask * * @discussion When active during a SleepServices wake, will keep the system awake, subject to * the sleep services time cap. * * Except for running during SleepServices time, while a system is on battery power * a ApplePushServiceTask assertion cannot keep the machine in a higher power state. * e.g. An ApplePushServiceTask cannot prevent sleep if the system is on battery. * * Awake Behavior on AC power: this assertion has no effect during full wake. * * DarkWake Behavior on AC power: this assertion will force the system not to sleep; * e.g. the system will stay in DarkWake as long as this assertion is held. * * If the platform supports SilentRunning, the assertion shall implement * this behavior: * - Keeps the system awake during DarkWake. * - Valid on AC & Battery * - Only valid in DarkWake * - Only valid during global SleepServicesTimeout Window (as determined by powerd) * - Only valid while SMC is in SilentRunning mode * * If the platform doesn't support SilentRunning, the assertion shall * implement this behavior: * - Prevents idle sleep * - Valid on AC & Battery * - Only valid in FullWake * - Only valid during global SleepServicesTimeout Window (as determined by powerd) * For SilentRunning support, see: * - <code>IOPMFeatureIsSupported(CFSTR(kIOPMSilentRunningKey))</code> */ #define kIOPMAssertionTypeApplePushServiceTask CFSTR("ApplePushServiceTask") /*! * @constant kIOPMAssertInteractivePushServiceTask * * @abstract Push Service infrastructure apps must take this while processing a push * and hold it until they can determine whether that push will cause * a user interactive wake or NotificationWake. * * @discussion Since pushes might or might not cause a user interactive wake, OS X needs * to wait until the recipient App can decide whether they do. Thus apsd and * apps must hold this assertion while they process incoming pushes. * * The caller must hold the darkwake-control entitlement: * - kIOPMDarkWakeControlEntitlement * * If system supports TCPKeepAlive, and TCPKeepAlive is dynamically enabled, * the assertion shall implement the following behavior: * - Prevents idle sleep * - Prevents forced sleep * - Reverts sleeps in progress. * - Valid on AC & Battery * - Valid in DarkWake & FullWake * - Per-assertion timeout (specified by IOPPF) * - OS X will prefer to run fanless; but OS X shall allow * the fans to come on. That is, OS X prefer that processes run * to completion over avoiding fan noise. * * If the system does not support TCPKeepAlive, or TCPKeepAlive is dynamically * disabled, then this assertion shall implement * kIOPMAssertionTypeApplePushServiceTask behavior. */ #define kIOPMAssertInteractivePushServiceTask CFSTR("InteractivePushServiceTask") /*! * @constant kIOPMAssertionTypeBackgroundTask * * @discussion This assertion should be created and held by applications while performing * system maintenance tasks, e.g. work not initiated by a user. * * Only Centralized Task Scheduler Power Nap processes should use this assertion. * * Example: Periodic system data backups, spotlight indexing etc. * * Behavior of this assertion on Systems that support Silent Running: * On AC: Prevents sytem sleep. If system is idle or if user requests sleep(by * lid close or by selecting sleep from apple menu), system runs with display * off in silent running mode. Holding this assertion during darkwake results * in extending dark wake in silent running mode. * On Battery: This assertion is not honoured. * * Behavior on Systems that don't support Silent Running: * On AC: Prevents system idle sleep. Display may get turned off. If user requests * sleep(by lid close or apple menu sleep), then system goes into sleep. * If the assertion is held during dark wake, it is not honored. * On Battery: This assertion is not honoured. * */ #define kIOPMAssertionTypeBackgroundTask CFSTR("BackgroundTask") /*! @define kIOPMAssertionTypeDenySystemSleep * @deprecated Please use public assertion <code>@link kIOPMAssertionTypePreventSystemSleep@/link</code>, * instead of this one. */ #define kIOPMAssertionTypeDenySystemSleep CFSTR("DenySystemSleep") /*! @define kIOPMAssertionUserIsActive * @abstract Powers on the display and prevents display from going dark. * @discussion This is the backend assertion supporting * <code>@link IOPMAssertionDeclareUserActivity @/link</code>. * * Public API users should call IOPMAssertionDeclareUserActivity; * internal Apple SPI users may opt to directly create this assertion * for finer grained control over its timeout. */ #define kIOPMAssertionUserIsActive CFSTR("UserIsActive") /*! @define kIOPMAssertDisplayWake * @abstract For IOKit use only. * This is the acking assertion for: * <code>@link IOPMAssertionDeclareNotificationEvent@/link</code> * @discussion Don't create this assertion directly. Always take it by * calling IOPMAssertionDeclareNotificationEvent. * Callers must be entitled with com.apple.private.iokit.darkwake-control * to use this assertion or to call IOPMAssertionDeclareNotificationEVent. */ #define kIOPMAssertDisplayWake CFSTR("DisplayWake") /*! @define kIOPMAssertInternalPreventSleep * @abstract For powerd use only. * @discussion Assertion taken by powerd as a proxy temporarily. * This can be taken either to finish a short-term task(like device enumeration) * or to keep system awake until wake reason is detected and the apps specific to this * wake take their own assertion. * Do not use this assertion outside of powerd. */ #define kIOPMAssertInternalPreventSleep CFSTR("InternalPreventSleep") /*! @define kIOPMAssertiInternalPreventDisplaySleep * @abstract For powerd use only. * @discussion Assertion taken by powerd as a proxy temporarily to prevent display sleep. * Do not use this assertion outside of powerd. */ #define kIOPMAssertInternalPreventDisplaySleep CFSTR("InternalPreventDisplaySleep") /*! @define kIOPMAssertMaintenanceActivity * * @abstract Keep the system awake in FullWake or DarkWake for maintenance activity. * AC/Batt behavior - Works on AC only * Acoustics behavior - This assertion will not trigger system to * go into non-silent running mode. */ #define kIOPMAssertMaintenanceActivity CFSTR("MaintenanceWake") /* @define kIOPMAssertionTypeSystemIsActive * @abstract Prevents idle sleep, but also reverts a sleep-in-progress. * * @discussion Do not create this assertion directly. Create it by calling * <code>@link IOPMAssertionDeclareSystemIsActive()@/link</code> * * 'kIOPMAssertionTypeSystemIsActive will revert an idle sleep currently in progress * where possible. If reverting an idle sleep is not possible, it will try to wake the system * up immediately once the system goes to sleep. Apart from this one side-effect, it behaves * identically to a PreventUserIdleSystemSleep assertion. * * Consider calling IOPMAssertionDeclareSystemIsActive() if you would like to create an * assertion of this type instead of directly creating it using one of the IOPMAssertionCreate * APIs. * */ #define kIOPMAssertionTypeSystemIsActive CFSTR("SystemIsActive") // Disables AC Power Inflow (requires root to initiate) #define kIOPMAssertionTypeDisableInflow CFSTR("DisableInflow") #define kIOPMInflowDisableAssertion kIOPMAssertionTypeDisableInflow // Disables battery charging (requires root to initiate) #define kIOPMAssertionTypeInhibitCharging CFSTR("ChargeInhibit") #define kIOPMChargeInhibitAssertion kIOPMAssertionTypeInhibitCharging // Disables low power battery warnings #define kIOPMAssertionTypeDisableLowBatteryWarnings CFSTR("DisableLowPowerBatteryWarnings") #define kIOPMDisableLowBatteryWarningsAssertion kIOPMAssertionTypeDisableLowBatteryWarnings // Once initially asserted, the machine may only idle sleep while this assertion // is asserted. For embedded use only. #define kIOPMAssertionTypeEnableIdleSleep CFSTR("EnableIdleSleep") // Needs CPU Assertions - DEPRECATED // Only have meaning on PowerPC machines. #define kIOPMAssertionTypeNeedsCPU CFSTR("CPUBoundAssertion") #define kIOPMCPUBoundAssertion kIOPMAssertionTypeNeedsCPU #pragma mark Private Assertion Dictionary Keys /* * Private Assertion Dictionary Keys */ #define kIOPMAssertionUsedDeprecatedCreateAPIKey CFSTR("UsedDeprecatedCreateAPI") /*! @constant kIOPMAssertionCreateDateKey * @abstract Records the time at which the assertion was created. */ #define kIOPMAssertionCreateDateKey CFSTR("AssertStartWhen") /*! @constant kIOPMAssertionReleaseDateKey * @abstract Records the time that the assertion was released. * @discussion The catch is that we only record the release time for assertions that have * already timed out. In the normal create/release lifecycle of an assertion, we won't record * the release time because we'll destroy the assertion object upon its release. */ #define kIOPMAssertionReleaseDateKey CFSTR("AssertReleaseWhen") /*! @constant kIOPMAssertionTimedOutDateKey * @abstract Records the time that an assertion timed out. * @discussion An assertion times out when its specified timeout interval has elapsed. * This value only exists once the assertion has timedout. The presence of this * key/value pair in a dictionary indicates the assertion has timed-out. */ #define kIOPMAssertionTimedOutDateKey CFSTR("AssertTimedOutWhen") /*! @constant kIOPMAssertionTimeOutIntervalKey * @abstract The owner-specified timeout for this assertion. */ #define kIOPMAssertionTimeOutIntervalKey CFSTR("AssertTimeOutInterval") /*! @constant kIOPMAssertionTimeoutTimeLeftKey * @abstract Records number of seconds left before this assertion times out */ #define kIOPMAssertionTimeoutTimeLeftKey CFSTR("AssertTimeoutTimeLeft") /*! @constant kIOPMAssertionTimeoutUpdateTimeKey * @abstract Records the time at which 'kIOPMAssertionTimeoutTimeLeftKey' is updated */ #define kIOPMAssertionTimeoutUpdateTimeKey CFSTR("AssertTimeoutUpdateTime") /*! @constant kIOPMAssertionPIDKey * @abstract The owning process's PID. */ #define kIOPMAssertionPIDKey CFSTR("AssertPID") /*! @constant kIOPMAssertionGlobalIDKey * @abstract A uint64_t integer that can uniuely identify an assertion system-wide. * * @discussion kIOPMAssertionGlobalIDKey differs from the assertion ID (of type IOPMAssertionID) * returned by IOPMAssertionCreate* API. kIOPMAssertionGlobalIDKey can refer to * an assertion owned by any process. The 32-bit IOPMAssertionID only refers to * assertions within the process that created the assertion. * You can use the API <code>@link IOPMCopyAssertionsByProcess@/link</code> * to see assertion data for all processes. */ #define kIOPMAssertionGlobalUniqueIDKey CFSTR("GlobalUniqueID") /*! * @define kIOPMAssertionAppliesToLimitedPowerKey * * @abstract The CFDictionary key for assertion power limits in an assertion info dictionary. * * @discussion The value for this key will be a CFBooleanRef, with value * <code>kCFBooleanTrue</code> or <code>kCFBooleanFalse</code>. A value of * kCFBooleanTrue means that the assertion is applied even when system is running * on limited power source like battery. A value of kCFBooleanFalse means that * the assertion is applied only when the system is running on unlimited power * source like AC. * * This property is valid only for assertion <code>@link kIOPMAssertionTypePreventSystemSleep @/link</code>. * By default, this assertion is applied only when system is running on unlimited * power source. This behavior can be changed using this property. */ #define kIOPMAssertionAppliesToLimitedPowerKey CFSTR("AppliesToLimitedPower") /*! * @define kIOPMAssertionAppliesOnLidClose * * @abstract The CFDictionary key in assertion info dictionarty for enabling assertion when lid is closed. * * @discussion The value for this key will be a CFBooleanRef, with value * <code>kCFBooleanTrue</code> or <code>kCFBooleanFalse</code>. A value of * kCFBooleanTrue means that the assertion is applied even when lid is closed. * A value of kCFBooleanFalse means that the assertion is applied only when * lid is open. * * This property is valid only for assertion <code>@link kIOPMAssertionUserIsActive @/link</code>. * By default, this assertion is applied only when lid is open and setting this assertion property * changes that default behavior. This assertion property has no meaning on systems with no lid * and it is treated as no-op. */ #define kIOPMAssertionAppliesOnLidClose CFSTR("AppliesOnLidClose") /*! * @constant kIOPMAssertionTimedOutNotifyString * @discussion Assertion notify(3) string * Fires when an assertion times out. Caller has to call IOPMAssertionNotify() * and register with powerd with this string before calling notify_register. * Call IOPMCopyTimedOutAssertions() for a list of timed-out assertions. */ #define kIOPMAssertionTimedOutNotifyString "com.apple.system.powermanagement.assertions.timeout" /*! * @constant kIOPMAssertionsAnyChangedNotifyString * @discussion Assertion notify(3) string * Fires when any individual assertion is created, released, or modified. * Caller has to call IOPMAssertionNotify() and register with powerd * with this string before calling notify_register. * */ #define kIOPMAssertionsAnyChangedNotifyString "com.apple.system.powermanagement.assertions.anychange" /*! * @constant kIOPMAssertionsChangedNotifyString * @discussion Assertion notify(3) string * Fires when global assertion levels change. This notification * doesn't necessarily fire when any individual assertion is * created, released, or modified. * Caller has to call IOPMAssertionNotify() and register with powerd * with this string before calling notify_register. */ #define kIOPMAssertionsChangedNotifyString "com.apple.system.powermanagement.assertions" /*! * @constant kIOPMDisableAppSleepPrefix * @discussion Assertion notify(3) string * Fires when a process raises an assertion of a type that can prevent app sleep. * This notification is posted only if power assertions are not currently preventing that app's sleep. * * Note: This is a prefix only. Actual notification will be appended with PID of the process * creating the power assertion. eg. com.apple.system.powermanagement.disableappsleep.1234 * */ #define kIOPMDisableAppSleepPrefix "com.apple.system.powermanagement.disableappsleep" /*! * @constant kIOPMEnableAppSleepPrefix * @discussion Assertion notify(3) string * Fires when there are no more active assertions that can prevent app sleep from a process. * This notification is posted only if app sleep is currently prevented due to power assertions. * * Note: This is a prefix only. Actual notification will be appended with PID of the process * creating the power assertion. eg. com.apple.system.powermanagement.enableappsleep.1234 * */ #define kIOPMEnableAppSleepPrefix "com.apple.system.powermanagement.enableappsleep" /*! * @define kIOPMAssertionTimeoutActionKillProcess * * @discussion When a timeout expires with this action, Power Management will log the timeout event, * and will kill the process that created the assertion. Signal SIGTERM is issued to * that process. */ #define kIOPMAssertionTimeoutActionKillProcess CFSTR("TimeoutActionKillProcess") /*! @function IOPMAssertionSetTimeout * @abstract Set a timeout for the given assertion. * @discussion When the timeout fires, the assertion will be logged and a general notification * will be delivered to all interested processes. The notification will not identify the * timed-out assertion. The assertion will remain valid & in effect until it's released (if ever). * Timeouts are bad! Timeouts are a hardcore last chance for debugging hard to find assertion * leaks. They are not meant to fire under any normal circumstances. */ IOReturn IOPMAssertionSetTimeout(IOPMAssertionID whichAssertion, CFTimeInterval timeoutInterval); /*! @function IOPMCopyTimedOutAssertions * @abstract Returns a CFArray of assertions (as CFDictionary's) that have timed out. * @discussion Only the 5 most recent assertions are recorded. */ IOReturn IOPMCopyTimedOutAssertions(CFArrayRef *timedOutAssertions); CFStringRef IOPMAssertionCreateTimeOutKey(void); CFStringRef IOPMAssertionCreatePIDMappingKey(void); CFStringRef IOPMAssertionCreateAggregateAssertionKey(void); /* * Deprecated assertion constants */ #if TARGET_OS_IPHONE // RY: Look's like some embedded clients are still dependent on the following #define kIOPMPreventIdleSleepAssertion kIOPMAssertionTypeNoIdleSleep #define kIOPMEnableIdleSleepAssertion kIOPMAssertionTypeEnableIdleSleep enum { kIOPMAssertionDisable = kIOPMAssertionLevelOff, kIOPMAssertionEnable = kIOPMAssertionLevelOn, kIOPMAssertionIDInvalid = kIOPMNullAssertionID }; #define kIOPMAssertionValueKey kIOPMAssertionLevelKey #endif /* TARGET_OS_IPHONE */ /************************************************** * * Energy Saver Preferences - Constants * **************************************************/ /*! * @group PM Preferences */ #define kIOPMDynamicStoreSettingsKey "State:/IOKit/PowerManagement/CurrentSettings" #define kIOPMDynamicStoreUserOverridesKey "State:/IOKit/PowerManagement/UserOverrides" #define kIOPMDefaultPreferencesKey "Defaults" #define kIOPMUPSPowerKey "UPS Power" #define kIOPMBatteryPowerKey "Battery Power" #define kIOPMACPowerKey "AC Power" // units - CFNumber in minutes #define kIOPMDisplaySleepKey "Display Sleep Timer" // units - CFNumber in minutes #define kIOPMDiskSleepKey "Disk Sleep Timer" // units - CFNumber in minutes #define kIOPMSystemSleepKey "System Sleep Timer" // units - CFNumber 0/1 #define kIOPMWakeOnLANKey "Wake On LAN" // units - CFNumber 0/1 #define kIOPMWakeOnRingKey "Wake On Modem Ring" // units - CFNumber 0/1 #define kIOPMRestartOnPowerLossKey "Automatic Restart On Power Loss" // units - CFNumber 0/1 #define kIOPMWakeOnACChangeKey "Wake On AC Change" // units - CFNumber 0/1 #define kIOPMSleepOnPowerButtonKey "Sleep On Power Button" // units - CFNumber 0/1 #define kIOPMWakeOnClamshellKey "Wake On Clamshell Open" // units - CFNumber 0/1 #define kIOPMReduceBrightnessKey "ReduceBrightness" // units - CFNumber 0/1 #define kIOPMDisplaySleepUsesDimKey "Display Sleep Uses Dim" // units - CFNumber 0/1 #define kIOPMMobileMotionModuleKey "Mobile Motion Module" // units - CFNumber 0/1 #define kIOPMTTYSPreventSleepKey "TTYSPreventSleep" // units - CFNumber 0/1 #define kIOPMGPUSwitchKey "GPUSwitch" // units - CFNumber 0/1 #define kIOPMDarkWakeBackgroundTaskKey "DarkWakeBackgroundTasks" // units - CFNumber 0/1 #define kIOPMPowerNapSupportedKey "PowerNap" // units - CFNumber 0/1 #define kIOPMSilentRunningKey "SilentRunning" // units - CFNumber 0/1 #define kIOPMSleepServicesKey "SleepServices" // units - CFNumber 0/1 #define kIOPMUnifiedSleepSliderPrefKey "UnifiedSleepSliderPref" // Restart on Kernel panic // Deprecated in 10.8. Do not use. #define kIOPMRestartOnKernelPanicKey "RestartAfterKernelPanic" // See xnu/iokit/IOKit/pwr_mgt/IOPM.h for other PM Settings keys: // kIOPMDeepSleepEnabledKey // kIOPMDeepSleepDelayKey /*! * kIOPMPrioritizeNetworkReachabilityOverSleepKey * * mDNSResponder will transfer responsibility for publishing network services * to a Bonjour sleep proxy during sleep. * * This PM Feature has a value of: * kCFBooleanTrue = If no sleep proxy is available, mDNSResponder will * prevent system sleep with a PM assertion to maintain network connections. * * kCFBooleanFalse = If there is no sleep proxy available, the system will * fall asleep and prevent network service accessibility. * * mDNSResponder is responsible for acting upon this key. * value is false/true as a CFNumber 0/1 */ #define kIOPMPrioritizeNetworkReachabilityOverSleepKey "PrioritizeNetworkReachabilityOverSleep" // kIOPMReduceSpeedKey // Deprecated; do not use. Only relevant to PowerPC systems. #define kIOPMReduceSpeedKey "Reduce Processor Speed" // kIOPMDynamicPowerStepKey // Deprecated; do not use. Only relevant to PowerPC systems. #define kIOPMDynamicPowerStepKey "Dynamic Power Step" /************************************************** * * Energy Saver Preferences - Functions * **************************************************/ typedef void (*IOPMPrefsCallbackType)(void *context); /*! * @function IOPMPrefsNotificationCreateRunLoopSource * @abstract Returns a CFRunLoopSourceRef that notifies the caller when any PM preferences * file changes - including Energy Saver or UPS changes. * @param callback A function to be called whenever a prefs file changes. * @param context Any user-defined pointer, passed to the IOPowerSource callback. * @result Returns NULL if an error was encountered, otherwise a CFRunLoopSource. Caller must * release the CFRunLoopSource. */ CFRunLoopSourceRef IOPMPrefsNotificationCreateRunLoopSource(IOPMPrefsCallbackType callback, void *context); /* Structure of a "pm preferences" dictionary, as referenced below. * * PMPreferencesDictionary = * { * "AC Power" = PowerSourcePreferencesDictionary * "Battery Power" = PowerSourcePreferencesDictionary * "UPS Power" = PowerSourcePreferencesDictionary * kIOPMDefaultPreferencesKey = true/false * } * * PowerSourcePreferencesDictionary = * { * kIOPMDiskSleepKey = 0 and up * kIOPMSystemSleepKey = 0 and up * kIOPMDisplaySleepKey = 0 and up * * kIOPMWakeOnLANKey = 0/1 * kIOPMWakeOnRingKey = 0/1 * kIOPMWakeOnACChangeKey = 0/1 * ... etc * } * * * Notes: * * If battery power or UPS power are not present on a system, they will * be absent from the PM Preferences dictionary. * * If a given setting, like ReduceBrightness is unsupported on a given * system, it will not appear in the PowerSourcePreferencesDictionary. * * If the property kIOPMDefaultPreferencesKey is present and set to true, * then the user has not specified any custom PM preferences. These are all * "hardcoded" default properties. As such, the settings in a default custom * dict do NOT factor in power profile settings. * * * See IOPMCopyActivePMPreferences() for settings that account for PM profile * selections. */ /*! @function IOPMCopyCustomPMPreferences @abstract Returns a dictionary of user-selected custom PM preferences. The CFString key kIOPMDefaultPreferencesKey will be present in the top-level dictionary if the returned settings are defaults, as in the case of a clean install @result Returns a CFDictionaryRef or NULL. Caller must CFRelease the dictionary. */ CFDictionaryRef IOPMCopyCustomPMPreferences(void); /*! @function IOPMCopyPMPreferences @abstract Identical to IOPMCopyCustomPMPreferences; Renamed to IOPMCopyCustomPMPreferences for clarity. */ CFMutableDictionaryRef IOPMCopyPMPreferences(void); #if !TARGET_OS_IPHONE /* * @function IOPMCopyPMSetting * @abstract SPI to discover whether HW Supports a setting, and if so what it's * currently set to (on each power source). * @param key Please pass in a Energy Settings CFStringRef key from IOPMLibPrivate.h * @param power_source Please specify which power source to query. One of: * <code>CFSTR(kIOPMACPowerKey)</code>, or <code>CFSTR(kIOPMBatteryPowerKey)</code>, * <code>CFSTR(kIOPMUPSPowerKey)</code>, or <code>NULL</code> to specify the * current power source. * @param outValue Upon success, will return the CFTypeRef value for the setting. Caller must release. * @result kIOReturnSuccess if it can return a valid value. * kIOReturnUnsupported if the setting isnŐt supported on this hardware. */ IOReturn IOPMCopyPMSetting(CFStringRef key, CFStringRef power_source, CFTypeRef *outValue); #endif /*! @function IOPMCopyActivePMPreferences @abstract Returns the _actual_ PM settings _currently_ in use by the system. @discussion Incorporates the active power profiles as well as custom settings. Does not return any settings unsupported on the running computer. */ CFDictionaryRef IOPMCopyActivePMPreferences(void); /*! @function IOPMCopyUnabridgedActivePMPreferences @abstract Returns the _actual_ PM settings _currently_ in use by the system. @discussion Behaves identically to IOPMCopyActivePMPreferences, except IOPMCopyUnabridgedActivePMPreferences returns all settings, including those settings unsupported on the running machine. i.e. the returned dictionary will include a setting for WakeOnRing on a computer without a modem. */ CFDictionaryRef IOPMCopyUnabridgedActivePMPreferences(void); /*! @function IOPMSetCustomPMPreferences @abstract Writes a PM preferences dictionary to disk. Also activates these preferences and sends notifications to interested applications via SystemConfiguration. @param ESPrefs Dictionary of Power Management preferences to write out to disk. @result Returns kIOReturnSuccess or an error condition if request failed. */ IOReturn IOPMSetCustomPMPreferences(CFDictionaryRef ESPrefs); /*! @function IOPMSetPMPreferences @abstract Identical to IOPMSetCustomPMPreferences. Renamed to IOPMSetCustomPMPreferencs for clarity. */ IOReturn IOPMSetPMPreferences(CFDictionaryRef ESPrefs); /*! @function IOPMRevertPMPreferences @abstract Revert the specified settings to their system default values across all power sources. Must be called as root. @param keys_arr A CFArrayRef of CFStrings. Each string should be a valid IOPM setting key. Pass NULL to revert all settings to the OS Energy Saver defaults. @result kIOReturnSuccess on success; error otherwise. */ IOReturn IOPMRevertPMPreferences(CFArrayRef keys_arr); /*! @function IOPMActivatePMPreference @abstract Activates the set of preferences called "name." Sets idle spin down timers and other Energy Saver settings according to profile name. @param SystemProfiles The dictionary of preferences from IOPMCopyPMPreferences @param profile The name of the set of preferences defined in ESPrefs to activate. @param removeUnsupportedSettings Specifies whether to send settings to kernel for settings that are currently unsupported (i.e. WakeOnRing with no modem present). True means do not activate unsupported settings, false means DO activate unsupported settings. @result Returns kIOReturnSuccess or an error condition if request failed. */ IOReturn IOPMActivatePMPreference( CFDictionaryRef SystemProfiles, CFStringRef profile, bool removeUnsupportedSettings); /*! * @function IOPMFeatureIsAvailable * @abstract Identifies whether a PM feature is supported on this platform. * @param feature The CFString feature to check for availability. * @param power_source CFSTR(kIOPMACPowerKey) or CFSTR(kIOPMBatteryPowerKef). Doesn't * matter for most features, but a few are power source dependent. * @result Returns true if supported, false otherwise. */ bool IOPMFeatureIsAvailable(CFStringRef feature, CFStringRef power_source); /*! * @function IOPMFeatureIsAvailableWithSupportedTable * @abstract Like <code>@link IOPMFeatureIsAvailable@/link </code> but lets caller pass in a * cached supported-features array. * @discussion Provides an optimized path if you'll be making repeated calls to IOPMFeatureIsAvailable. * The "Supported features table" does not change often - it may change during boot-up, and it * may change when hardware is added or removed to the system. * * By providing a cached copy here, IOPMFeatureIsAvailable can avoid re-reading the feature support * table on every invocation. * * If you are only occasionally invoking IOPMFeatureIsAvailable for 1-2 settings, you don't need * to bother with IOPMFeatureIsAvailableWithSupportedTable. Look into it for a performance optimization * if you do make multiple calls. * * @param PMFeature The CFString feature to check for availability. * * @param power_source CFSTR(kIOPMACPowerKey) or CFSTR(kIOPMBatteryPowerKef). Doesn't * matter for most features, but a few are power source dependent. * * @param supportedFeatures Pass in a CFDictionary describing available features, and which power sources * each supports. Obtain this dictionary from IOPMrootDomain in the IORegistry with code like this: * * io_registry_entry_t _rootDomain = * IORegistryEntryFromPath( kIOMasterPortDefault, * kIOPowerPlane ":/IOPowerConnection/IOPMrootDomain"); * CFDictionaryRef cachedSupportedFeatures = * IORegistryEntryCreateCFProperty(_rootDomain, * CFSTR("Supported Features"), * kCFAllocatorDefault, kNilOptions); * * @result Returns true on if supported, false otherwise. */ bool IOPMFeatureIsAvailableWithSupportedTable( CFStringRef PMFeature, CFStringRef power_source, CFDictionaryRef supportedFeatures); /**************************************************/ /*! * @function IOPMOverrideDefaultPMPreferences * * @discussion * Caller specifies a set of default energy saver preferences for this machine. * The system will use these settings as defaults, until the user selets a custom preference * via pmset, Enengy Saver, or elsewhere IOPMSetPMPreferences API. * * Use this API to specify a default setting value at runtime for the platform you're running on. * For instance, hibernatemode = 0 on dekstops, and hibernatemode = 3 on portables. That distinction * is made by IOPlatformExpert in the kernel, in an analogue to this API. * * If multiple calls to IOPMOverrideDefaultPMPreferences affect the same preference, behavior is undefined. * * @param overrideSettings * Caller may specify the new defaults one of two ways. PM excepts both of these styles of dictionaries: * * (1) Specify a setting that applies to all power sources. * * dictionary = { * Setting" = Object * } * * (2) Specify a setting that may have different falues for each of AC, Battery, or UPS. * * dictionary = { * "AC" = { * "Setting" = "Object" * }, * "Battery" = { * "Setting" = "Object" * }, * "UPS" = { * "Setting" = "Object" * } * } * */ void IOPMOverrideDefaultPMPreferences(CFDictionaryRef overrideSettings); /**************************************************/ /*! @function IOPMSleepSystemWithOptions @abstract Request that the system initiate sleep. @discussion For security purposes, caller must be root or the console user. @param userClient Port used to communicate to the kernel, from IOPMFindPowerManagement. @param sleepOptions a dictionary defining optional arguments to sleep. @result Returns kIOReturnSuccess or an error condition if request failed. */ IOReturn IOPMSleepSystemWithOptions ( io_connect_t userClient, CFDictionaryRef sleepOptions ); /**************************************************/ /* * kIOPMSystemSleepAvailableAtAll * System Power Setting (not power source specific) * value = true/false */ #define kIOPMSleepDisabledKey CFSTR("SleepDisabled") /*! @function IOPMCopySystemPowerSettings @abstract Returns System power settings. System-wide power settings are not power source dependent. */ CFDictionaryRef IOPMCopySystemPowerSettings( void ); /* @function IOPMSetSystemPowerSetting @abstract Set a system-wide power management setting @param key Setting name @param value Setting value @result kIOReturnSuccess; or IOReturn error otherwise */ IOReturn IOPMSetSystemPowerSetting( CFStringRef key, CFTypeRef value ); /*! @function IOPMActivateSystemPowerSettings @abstract Re-send system power settings to kernel. @result kIOReturnSuccess on success; IOReturn error otherwise */ IOReturn IOPMActivateSystemPowerSettings( void ); /************************************************** * * Power Profiles (use in combination with Energy Saver Preferences above) * **************************************************/ /*! * @group Power Profiles */ #define kIOPMCustomPowerProfile -1 #define kIOPMNumPowerProfiles 5 /*! @function IOPMCopyPowerProfiles @abstract Returns all power profiles and their corresponding Energy Settings. @discussion The array return value contains 5 dictionaries. - Entry 0 represents the "highest power savings", and entry 4 represents "Highest performance" - Each entry in the array is a "Power Profile" dictionary, which in turn contains individual dictionaries for AC Power, Battery Power, and UPS Power. Each of these per-power source dictionaries contains a mapping of Energy Settings to their values. Intended clients: Energy Saver Prefs, Battery Monitor, and pmset. - Use IOPMCopyPMPreferences() to read the custom profile. - Unsupported features and unsupported power sources will not be present in the returned data. @result NULL on error, a CFArrayRef on success. Caller must CFRelease() the return value when done. */ CFArrayRef IOPMCopyPowerProfiles(void); /*! @function IOPMCopyActivePowerProfile @abstract Returns the index of the currently active profile, or -1 if Custom preferences are active. @result A CFDictionary containing 1 or more entries mapping Power Sources to the currently selected profiles for each power source. kIOPMUPSPowerKey, kIOPMACPowerKey, kIOPMBatteryPowerKey With corresponding CFNumber value specifying an index falling somewhere within the IOPMCopyPowerProfiles() array OR integer value kIOPMCustomPowerProfile. */ CFDictionaryRef IOPMCopyActivePowerProfiles(void); /*! @function IOPMSetActivePowerProfile @abstract Activates the specified power profile, or the user's custom defined profile. @discussion Caller must have root, or admin privileges, or be the console user. Selects and activates a system power profile per power-source. - Use IOPMSetPMPreferences() to re-program the custom profile. - This call triggers notifications to all clients of IOPMPrefsNotificationCreateRunLoopSource() @param which_profile A CFDictionary specifying which profile to use for each power source. Keys should be CFSTR: kIOPMUPSPowerKey, kIOPMACPowerKey, kIOPMBatteryPowerKey Value should be a CFNumber (IntType) with value -1 to 4 @result kIOReturnNotPrivileged if caller does not have permission. Caller must CFRelease() the return value when done accessing it. */ IOReturn IOPMSetActivePowerProfiles(CFDictionaryRef which_profile); /************************************************** * * Repeating Sleep/Wake/Shutdown/Restart API * **************************************************/ /*! * @functiongroup Repeating power events */ // Keys to index into CFDictionary returned by IOPSCopyRepeatingPowerEvents() #define kIOPMRepeatingPowerOnKey "RepeatingPowerOn" #define kIOPMRepeatingPowerOffKey "RepeatingPowerOff" #define kIOPMAutoSleep "sleep" #define kIOPMAutoShutdown "shutdown" // Keys to "days of week" bitfield for IOPMScheduleRepeatingPowerEvent() enum { kIOPMMonday = 1 << 0, kIOPMTuesday = 1 << 1, kIOPMWednesday = 1 << 2, kIOPMThursday = 1 << 3, kIOPMFriday = 1 << 4, kIOPMSaturday = 1 << 5, kIOPMSunday = 1 << 6 }; // Keys to index into sub-dictionaries of the dictionary returned by IOPSCopyRepeatingPowerEvents // Absolute time to schedule power on (stored as a CFNumberRef, type = kCFNumberIntType) //#define kIOPMPowerOnTimeKey "time" // Bitmask of days to schedule a wakeup for (CFNumberRef, type = kCFNumberIntType) #define kIOPMDaysOfWeekKey "weekdays" // Type of power on event (CFStringRef) //#define kIOPMTypeOfPowerOnKey "typeofwake" /* @function IOPMScheduleRepeatingPowerEvent * @abstract Schedules a repeating sleep, wake, shutdown, or restart * @discussion Private API to only be used by Energy Saver preferences panel. Note that repeating sleep & wakeup events are valid together, * and shutdown & power on events are valid together, but you cannot mix sleep & power on, or shutdown & wakeup events. * Every time you call IOPMSchedueRepeatingPowerEvent, we will cancel all previously scheduled repeating events of that type, and any * scheduled repeating events of "incompatible" types, as I just described. * @param events A CFDictionary containing two CFDictionaries at keys "RepeatingPowerOn" and "RepeatingPowerOff". Each of those dictionaries contains keys for the type of sleep, the days_of_week, and the time_of_day. These arguments specify the time, days, and type of power events. * @result kIOReturnSuccess on success, kIOReturnError or kIOReturnNotPrivileged otherwise. */ IOReturn IOPMScheduleRepeatingPowerEvent(CFDictionaryRef events); /* @function IOPMCopyRepeatingPowerEvents * @abstract Gets the system * @discussion Private API to only be used by Energy Saver preferences panel. Copies the system's current repeating power on and power off events. The returned CFDictionary contains two CFDictionaries at keys "RepeatingPowerOn" and "RepeatingPowerOff". Each of those dictionaries contains keys for the type of sleep, the days_of_week, and the time_of_day. * @result NULL on failure, CFDictionary (possibly empty) otherwise. */ CFDictionaryRef IOPMCopyRepeatingPowerEvents(void); /* @function IOPMScheduleRepeatingPowerEvent * @abstract Cancels all repeating power events * @result kIOReturnSuccess on success, kIOReturnError or kIOReturnNotPrivileged otherwise. */ IOReturn IOPMCancelAllRepeatingPowerEvents(void); /************************************************** * * Power API - For userspace power & thermal drivers * **************************************************/ /* @function IOPMSystemPowerEventOccurred @abstract Called to alert the system of a power or thermal event @param eventType A CFStringRef defining the type of event @param eventObject The CF payload describing the event @result kIOReturnSuccess; kIOReturnNotPrivileged, kIOReturnInternalError, or kIOReturnError on error. */ IOReturn IOPMSystemPowerEventOccurred( CFStringRef typeString, CFTypeRef eventValue); /*****************************************************************************/ /*****************************************************************************/ /*****************************************************************************/ /***************************************************************************** * * Sleep/Wake Bookkeeping API * * Returns timing details about system level power events. * ******************************************************************************/ /*! * @functiongroup IOPM UUID Bookkeeping */ /*! * @function IOPMGetLastWakeTime * * @abstract returns the timestamp of the last system wake. * * @discussion If possible, the wakeup time is adjusted backward using hardware * timers, so that whenWake refers to the time of the physical event * that woke the system. * * @param whenWoke On successful return, whenWoke will contain the CFAbsoluteTime, * in the CF time scale, that the system awoke. This time is already adjusted * with the SMC wake delta, when available. * * @param adjustedForPhysicalWake Returns the interval (in CF time units of seconds) that * PM adjusted the wakeup time by. If the system doesn't support the HW timers * required to adjust the time, this value will be zero. * * @result Returns kIOReturnSuccess; all others returns indicate a failure; the returned * time values should not be used upon a failure return value. */ IOReturn IOPMGetLastWakeTime( CFAbsoluteTime *whenWoke, CFTimeInterval *adjustedForPhysicalWake); /*! IOPMSleepWakeSetUUID * Sets the upcoming sleep/wake UUID. The kernel will cache * this and activate it the next time the system goes to sleep. * Pass a CFStringRef to set the upcoming UUID. * Pass NULL to indicate that the current UUID should be cancelled. * Only should be called by PM configd & loginwindow. */ IOReturn IOPMSleepWakeSetUUID(CFStringRef newUUID); /*! * @group IOPMGetUUID types * * @constant kIOPMSleepWakeUUID * Argument to <code>@link IOPMGetUUID @/link</code> * * @constant kIOPMSleepServicesUUID * Argument to <code>@link IOPMGetUUID @/link</code> * */ enum { kIOPMSleepWakeUUID = 1000, kIOPMSleepServicesUUID = 1001 }; /*! * IOPMGetUUID * * Returns a C string that uniquely describes the "sleep interval" * that the system is in right now. * * @param whichUUID * The argument may be <code>kIOPMSleepWakeUUID</code>, to get the sleep/wake UUID, * or <code>kIOPMSleepServicesUUID</code> to get the sleep/wake UUID. * * OS X creates a new SleepWakeUUID when the system goes to sleep. OS X clears * it several minutes after the system wakes from sleep. * Every time OS X clears the SleepWakeUUID, it creates a new UUID. So there * are always valid SleepWake UUID's defined, even when the machine is awake. * Calls to <code>IOPMGetUUID()</code> for type <code>kIOPMSleepWakeUUID</code> * should in all non-error cases return true, and return a valid UUID string * in <code>putTheUUIDHere</code>. * * OS X creates a new SleepServiceUUID at the moment that process * <code>SleepServiceD</code> decides that a given wakeup shall be bound by * SleepService cap timers. * OS X clears the SleepServiceUUID when the system exits SleepServices. * At many points during a system's runtime, calling <code>IOPMGetUUID</code> * for <code>kIOPMSleepServicesUUID</code> may result in a return value * of false, and no string being copied into the passed-in buffer. * * @param putTheUUIDHere * Caller provides a pointer to a buffer of sufficient size to receive * a C string UUID. I recommend 100 bytes, because that's about 3x what * you should need. * * @param sizeOfBuffer * Caller must specify the size of the buffer they pass in as argument * <code>putTheUUIDHere</code> * * @result * Returns true if successfully copied the UUID into the provided buffer. * Returns false if there was an error, or if there was no buffer. * * @discussion * For example: * char my_buffer[100]; * * if(IOPMGetUUID(kIOPMSleepServicesUUID, my_buffer, sizeof(my_buffer))) * { * printf("my UUID is = %s", my_buffer); * } else { * printf("There is no such UUID defined right now."); * } * */ bool IOPMGetUUID(int whichUUID, char *putTheUUIDHere, int sizeOfBuffer); /*! IOPMSleepWakeCopyUUID * Returns the active sleep wake UUID, if it exists. * The returned UUID is only useful for logging events that occurred during * the given sleep/wake. * Returns a CFString containing the UUID. May return NULL if there is no UUID. * Unless the result is NULL, caller must release the result. */ CFStringRef IOPMSleepWakeCopyUUID(void); /*! @group DarkWake */ /* * IOPMSetSleepServicesWakeTimeCap * * Only SleepServicesD should call this SPI. If you are not writing code for * SleepServicesD, do not call this SPI. * * This SPI allows changing the Sleep services wake duration time cap. * On receiving this request, powerd ignores the existing time cap and * sets the time cap to specified duration starting from point when * the request is received. * * The initial sleep services time cap still need to be sent to powerd * thru the IOPMConnectionAcknowledgeEventWithOptions() API. This SPI * IOPMSetSleepServicesWakeTimeCap() should be used only to change the * existing time cap. * * The request is ignored if issued when there is no existing time cap * already set or if issued when system is not in sleep services wake. * * @param cap * This specifies the new cap time in milliseconds. * * @result * Returns kIOReturnSuccess if new time cap is set successfully. */ IOReturn IOPMSetSleepServicesWakeTimeCap(CFTimeInterval cap); // Poweranagement's 1-byte status code #define kIOPMSleepWakeFailureKey "PMFailurePhase" // PCI Device failure name // Will indicate which driver-subtree it occured in // If the failure took place during a driver sleep/wake phase, #define kIOPMSleepWakeFailureDriverTreeKey "PCIDeviceFailure" // LoginWindow's 1-byte status code // Will indicate LoginWindow's role in putting up the security panel // if the failure took place during sleep phase: // kIOPMTracePointSystemLoginwindowPhase = 0x30 #define kIOPMSleepWakeFailureLoginKey "LWFailurePhase" // The UUID of the sleep that failed #define kIOPMSleepWakeFailureUUIDKey "UUID" // The date of the attempted sleep that resulted in failure. #define kIOPMSleepWakeFailureDateKey "Date" // PowerManagement's 8-byte failure descriptor. // Do not reference this key, instead references the decoded data // stored under other keys in this dictionary. #define kIOPMSleepWakeFailureCodeKey "PMStatusCode" #define kIOPMSleepWakeWdogRebootKey "SWWdogTriggeredRestart" #define kIOPMSleepWakeWdogLogsValidKey "SWWdogLogsValid" /* * For use by LoginWindow only. * facility - Pass CFSTR(kIOPMLoginWindowSecurityDebugKey) for the facility * data - Pass a pointer to a variable containing one byte of data. * dataCount - Pass the integer 1. */ IOReturn IOPMDebugTracePoint( CFStringRef facility, uint8_t *data, int dataCount); /* * Returns data describing the sleep failure (if any) that occured prior to the system booting. * * This routine will return the same CFDictionary over the lifetime of a given boot - it does not return * dynamic information after each sleep/wake. It only returns information pertaining to the last * failed sleep/wake before booting up. * * If NULL, then the last sleep/wake was successful, or we were unable to determine whether * there was a problem. * If non-NULL, Caller must release the returned dictionary. * * kIOPMSleepWakeFailureLoginKey points to a CFNumber containing LW's 8-bit code. * kIOPMSleepWakeFailureUUIDKey points to a CFStringRef containing the UUID associated with the failed sleep. * kIOPMSleepWakeFailureDateKey points to the CFDate that the failed sleep was initiated. */ CFDictionaryRef IOPMCopySleepWakeFailure(void); /************************************************** * * SW-generated HID events history * * OS PM records software generated HID events by process, for * later associating HID events that are preventing display sleep * and system sleep with the processes that created them. * **************************************************/ typedef struct { CFAbsoluteTime eventWindowStart; uint32_t hidEventCount; // MOUSE, KEYBOARD, or other NON-NULL event uint32_t nullEventCount; // NX_NULL_EVENT } IOPMHIDPostEventActivityWindow; /*! * Key into process HID activity dictionary. * The value is the path to the caller's * executable path. */ #define kIOPMHIDAppPathKey CFSTR("AppPathString") /*! * Key into process HID activity dictionary. * The value is a CFNumber integer - the caller's pid. */ #define kIOPMHIDAppPIDKey CFSTR("AppPID") /*! * Key into process HID activity dictionary. * The value is a CFArray of recent HID activity. The CFArray contains * CFData blocks, each with size = sizeof(IOHIDPostEventActivityWindow) * Each block summarizing a 5 minute window of HID activity. */ #define kIOPMHIDHistoryArrayKey CFSTR("HIDHistoryArray") /*! * IOPMCopyHIDPostEventHistory * The returned CFArray contains one dictionary per HID-posting process. * CFDictionary contains * key = AppPID * CFNumberRef for pid * key = AppPathString * CFStringRef path to pid's executable (program name) * key = HIDHistoryArray * CFArray of CFData * Each CFData represents a "bucket" of IOHPMIDPostEventActivityWindow, * representing a 5 minute window of HID activity. * @param outDictionary On success, returns a valid CFDictionaryRef. The caller must release this array. * Will return NULL otherwise. * @result kIOReturnSuccess on success; kIOReturnNotFound if HID event logging is disabled; * kIOReturnError for all others errors. */ IOReturn IOPMCopyHIDPostEventHistory(CFArrayRef *outDictionary); /************************************************** * * IOPM Power Details log * * Logs fine-grained details about per-driver sleep/wake activity * into a in-memory buffer. PowerManagement translates that buffer * into a CFType-based representation of all driver power activity * during sleep/wake. * * These calls may take upwards of 1 second to execute. Do not call * any of these "PowerDetails" calls from a UI thread. * **************************************************/ #define kIOPMPowerHistoryEventTypeKey "EventType" #define kIOPMPowerHistoryEventReasonKey "EventReason" #define kIOPMPowerHistoryEventResultKey "EventResult" #define kIOPMPowerHistoryDeviceNameKey "DeviceName" #define kIOPMPowerHistoryUUIDKey "UUID" #define kIOPMPowerHistoryInterestedDeviceNameKey "InterestedDeviceName" #define kIOPMPowerHistoryTimestampKey "Timestamp" #define kIOPMPowerHistoryDeviceUniqueIDKey "DevinceUnique" #define kIOPMPowerHistoryElapsedTimeUSKey "ElapsedTimeUS" #define kIOPMPowerHistoryOldStateKey "OldPowerState" #define kIOPMPowerHistoryNewStateKey "NewPowerState" #define kIOPMPowerHistoryTimestampCompletedKey "ClearTime" #define kIOPMPowerHistoryEventArrayKey "EventArray" /* * The timestamps that IOPMCopyPowerHistory returns are CFStrings that need * to be interpreted in this Unicode date format pattern. They can be * converted to CFAbsoluteTime or otherwise, using this format string */ #define kIOPMPowerHistoryTimestampFormat "MM,dd,yy HH:mm:ss zzz" /* * Returns a list of major power events (sleep, wake) in chronological order. * On failure, IOReturn will reflect the type of failure. * On success, caller must release returned array. * * Input: A CFArrayRef into which the series of power events is copied into * * Output: A filled CFArrayRef with details of all major power events. Caller * is responsible for releasing the filled array at some later point * * Returns kIOReturnSuccess on success, error code of type IOReturn otherwise * * NOTE: The CFArray returned consists of individual CFDictionaries. Each * CFDictionary within the array has the following structure * * CFDictionary { * { * key: kIOPMPowerHistoryUUIDKey * value: UUID of power event cluster (CFString) * } * { * key: kIOPMPowerHistoryTimestampKey * value: Time marking the beginning of this power event cluster (CFString) * } * { * key: kIOPMPowerHistoryTimestampCompletedKey * value: Timae marking the end of this power event cluster (CFString) * } * } * * The timestamps returned as CFStrings can be interpreted/parsed using * kIOPMPowerHistoryTimestampFormat as defined above */ IOReturn IOPMCopyPowerHistory(CFArrayRef *outArray); /* * When available, returns details of driver activity that occurred * during a larger power event. * * Input: A UUID representing a power event. * Obtained from IOPMCopyPowerHistory. * * Output: A CFDictionaryRef of detailed power events that occurred during * that UUID. Possibly NULL. * On success, caller should release the returned array. * * Returns: kIOReturnSuccess on success; error code otherwise. * * NOTE: The CFDictionary returned by this function has the following * structure: * * CFDictionary { * { * key: kIOPMPowerHistoryUUIDKey * value: UUID identifier for this cluster of power events (CFString) * } * { * key: kIOPMPowerHistoryTimestampKey * value: Time marking the beginning of the power event cluster * Note that timestamps are returned as CFAbsoluteTime in this * method (unlike in IOPMCopyPowerHistory) to avoid loss of * precision (CFAbsoluteTime). * } * { * key: kIOPMPowerHistoryTimestampCompletedKey * value: Time marking the end of the power event cluster * Note that timestamps are returned as CFAbsoluteTime in this * method (unlike in IOPMCopyPowerHistory) to avoid loss of * precision (CFAbsoluteTime). * } * { * key: kIOPMPowerHistoryEventArrayKey * value: An array containing details of individual power events within * the larger cluster (CFArray). The details of each fine-grained * power event is placed in the form of a CFDictionary inside * this array. The structure of this CFDictionary is explained * below * } * } * * * Each CFDictionary (which describes a fine-grained power state change) * within the Power events array is structured as: * * CFDictionary { * { * key: kIOPMPowerHistoryTimestampKey * value: Time at which the given state change took place (CFAbsoluteTime) * } * { * key: kIOPMPowerHistoryEventReasonKey * value: Reason for the state change, if any (CFNumber) * } * { * key: kIOPMPowerHistoryEventResultKey * value: Result of the given state change, if any * } * { * key: kIOPMPowerHistoryDeviceNameKey * value: Name of the device that's changing state (CFString) * } * { * key: kIOPMPowerHistoryUUIDKey * value: UUID of the larger power event cluster that this state change * belongs to (CFString) * } * { * key: kIOPMPowerHistoryInterestedDeviceNameKey * value: Name of any other device that's interested in watching this * power state change (CFStringRef) * } * { * key: kIOPMPowerHistoryOldStateKey * value: The old power state from which the device is changing out of * (CFNumber) * } * { * key: kIOPMPowerHistoryNewStateKey * value: The new power state the device is changing into (CFNumber) * } * { * key: kIOPMPowerHistoryTimeElapsedUSKey * value: The total time taken for the power state transition to * complete, measured in microseconds (CFNumber) * } * } */ IOReturn IOPMCopyPowerHistoryDetailed(CFStringRef UUID, CFDictionaryRef *outDict); /************************************************** * * IOPMConnection API * * IOPMConnection API lets user processes receive * power management notifications. * **************************************************/ /*! * @functiongroup IOPMConnection */ /*! * IOPMConnection is the basic connection type between a user process * and system power management. * IOPMConnections are backed by mach ports, and are automatically cleaned up * on process death. */ typedef const struct __IOPMConnection * IOPMConnection; /*! * A unique IOPMConnectionMessageToken accompanies each PM message received from * an IOPMConnection notification. This message token should be passed as an argument * to IOPMConnectionAcknowledgeEvent(). */ typedef uint32_t IOPMConnectionMessageToken; /*****************************************************************************/ /*****************************************************************************/ /*! @group IOPMCapabilityBits * * Bits define capabilities in IOPMCapabilityBits type. * * These bits describe the capabilities of a system power state. * Each bit describes whether a capability is supported; it does not * guarantee that the described feature is accessible. Even if a feature * is accessible, it may be unavailable. Caller should be prepared for an error * when accessing. * * Please use these bits to: * - Specify the capabilities of insterest for IOPMConnectionCreate() * - Interpret the power states provided to IOPMEventHandlerType notification. */ /*! @constant kIOPMSystemPowerStateCapabilityCPU * If set, indicates that in this power state the CPU is running. If this bit is clear, * then the system is going into a low power state such as sleep or hibernation. * * System capability bits (video, audio, network, disk) will only be available * if CPU bit is also available. */ #define kIOPMCapabilityCPU 0x1 /*! @constant kIOPMCapabilityVideo * If set, indicates that in this power state, graphic output to displays are supported. */ #define kIOPMCapabilityVideo 0x2 /*! @constant kIOPMCapabilityAudio * If set, indicates that in this power state, audio output is supported. */ #define kIOPMCapabilityAudio 0x4 /*! @constant kIOPMCapabilityNetwork * If set, indicates that in this power state, network connections are supported. */ #define kIOPMCapabilityNetwork 0x8 /*! @constant kIOPMCapabilityDisk * If set, indicates that in this power state, internal disk and storage device access is supported. */ #define kIOPMCapabilityDisk 0x10 /*! @constant kIOPMCapabilityPushServiceTask * If set, the system may perform PushServiceTasks while in this power state, and * the system will honor PushServiceTask power assertions. * If clear, the system will not honor PushServiceTask power assertions. * Clients should initiate PushServiceTasks or create PushServiceTask assertions if this bit is set. */ #define kIOPMCapabilityPushServiceTask 0x20 /*! @constant kIOPMCapabilityBackgroundTask * If set, the system may perform BackgroundTasks while in this power state, and * the system will honor BackgroundTask power assertions. * If clear, the system will not honor BackgroundTask power assertions. If set, * Clients should initiate BackgroundTasks or create BackgroundTask assertions if this bit is set. */ #define kIOPMCapabilityBackgroundTask 0x40 /*! * @constant kIOPMCapabilitySilentRunning * If set, indicates that the system is able to operate in an acoustically favorable environment * while performing background tasks * If clear, the system is no longer able to maintain this acoustically favorable environment, * and maybe prone to making noise (fans/hard drive clicks) while operating. Clients are advised * to hold off/end background task work, or risk user annoyance because of machine noise. * * WARNING: This bit is not for you. Clients should use the PushServiceTask or BackgroundTask bit * to decide when to perform/hold off on intensive background work. This bit is only * provided for the benefit of specific system daemons. */ #define kIOPMCapabilitySilentRunning 0x80 /*! @constant kIOPMCapabilityBitsMask * Should be used as a mask to check for states; this value should not be * passed as an an argument to IOPMConnectionCreate. * Passing this as an interest argument will produce undefined behavior. * * Note: Do not use constant kIOPMCapabilityMask. That matches a different API, * and should not be used here. * Any PowerStateCapability bits that are not included in this mask are * reserved for future use. */ #define kIOPMCapabilityBitsMask 0xFF /*! @group IOPMCapability SPI */ /*! IOPMCapabilityBits * Should be a bitfield with a subset of the IOPMCapabilityBits. */ typedef uint32_t IOPMCapabilityBits; /*! @constant kIOPMEarlyNotification * If set, indicates that this wake notification is an early notification indicating * that system will wake up with the specified capabilities. * * This notification is issued only if the client has set this bit in 'interests' while * calling IOPMConnectionCreate(). This early notification is issued only as an * advisory to the clients and the wake process can't be delayed by the client * receiving this notification. */ #define kIOPMEarlyWakeNotification 0x8000 /*! IOPMIsADarkWake * Returns true if the SystemPowerStateCapabilities represent a DarkWake. * Returns false if the system is asleep, or in full wake, or in any other state. */ bool IOPMIsADarkWake(IOPMCapabilityBits); /*! IOPMIsABackgroundTask * Returns true if the SystemPowerStateCapabilities represent a state where * the system encourages BackgroundTasks to execute. */ bool IOPMAllowsBackgroundTask(IOPMCapabilityBits); /*! IOPMIsAPushServiceTask * Returns true if the SystemPowerStateCapabilities represent a state where * the system encourages PushServiceTasks to execute. */ bool IOPMAllowsPushServiceTask(IOPMCapabilityBits); /*! IOPMIsASilentWake * Returns true if the SystemPowerStateCapabilities represent a silent wake. * A silent wake is one in which the system is able to sustain an * acoustically favorable environment while background tasks execute. * Returns false if the machine is no longer able to support this acoustic * environment and is likely to be noisy under load. * * WARNING: This SPI is not for you. Clients should use IOPMAllowsBackgroundTask * and IOPMAllowsPushServiceTask to determine when to perform/not perform * background work. This SPI is provided for the benefit of specific * system daemons * Additionally, the parameters of this SPI are being fine-tuned * and are very likely to change. Use at your own risk/peril/doom. */ bool IOPMIsASilentWake(IOPMCapabilityBits); /*! IOPMIsAUserWake * Returns true if the SystemPowerStateCapabilities represent a full user wake. * This implies that video and audio capability bits are available, though their * hardware is not necessarily powered. */ bool IOPMIsAUserWake(IOPMCapabilityBits); /*! IOPMIsAsleep * Returns true if the capabilities field represents a sleeping state. */ bool IOPMIsASleep(IOPMCapabilityBits); /*! IOPMGetCapabilitiesDescription * Fills the provided buffer with a C string describing the system capabilities. * Example: "FullWake: cpu disk net aud vid" to describe bits for a Full Wake. * Example: "DarkWake: cpu disk net" or "DarkWake: cpu disk net push bg" to describe a DarkWake. * @param buf A string buffer to be popuplated by this routine. Recommend 50 bytes or larger. * @param buf_size The size of the buffer. IOPMGetCapabilitiesDescription will not write beyond this size. * @param in_caps The capabilities to describe. * @result Returns true on success. Returns false if the provided buffer was too small. */ bool IOPMGetCapabilitiesDescription(char *buf, int buf_size, IOPMCapabilityBits in_caps); /*! @deprecated * These constants are equivalent to the shorter kIOPMCapability constants defined above. * We provide these longer constant strings for source code compatibility. * Please use the kIOPMCapability version of these constants. */ typedef uint32_t IOPMSystemPowerStateCapabilities; #define kIOPMSystemPowerStateCapabilityCPU kIOPMCapabilityCPU #define kIOPMSystemPowerStateCapabilityVideo kIOPMCapabilityVideo #define kIOPMSystemPowerStateCapabilityAudio kIOPMCapabilityAudio #define kIOPMSystemPowerStateCapabilityNetwork kIOPMCapabilityNetwork #define kIOPMSystemPowerStateCapabilityDisk kIOPMCapabilityDisk #define kIOPMSytemPowerStateCapabilitiesMask kIOPMCapabilityBitsMask /*! IOPMEventHandlerType * IOPMEventHandlerType is the generic function type to handle a * notification generated from the power management system. All clients of * IOPMConnection that wish to listen for notifications must provide a handler * when they call IOPMConnectionCreate. * @param param Pointer to user-chosen data. * @param connection The IOPMConnection associated with this notification. * @param token Uniquely identifies this message invocation; should be passed * to IOPMConnectAcknowledgeEvent(). * @param eventDescriptor Provides a bitfield describing the new system power state. * See IOPMCapabilityBits below. Please evaluate this value as a bitfield, * not as a constant. Either: * 1. Test bits indidivually using bitwise &, * 2. or use the convenient IsADarkWake(), IsASleep(), etc. functions to digest the bitfield. */ typedef void (*IOPMEventHandlerType)( void *param, IOPMConnection connection, IOPMConnectionMessageToken token, IOPMCapabilityBits eventDescriptor); /*****************************************************************************/ /*****************************************************************************/ /*! kIOPMAckNetworkMaintenanceWakeDate * * This string can be used as a key in the 'options' dictionary * argument to IOPMConnectionAcknowledgeEventWithOptions. Caller * should push a CFDate value to match this key. * * System network daemons should populate this option to specify the * next wakeup date. * Passing this "Date" option lets a caller request a maintenance wake * from the system at a later date. If possible, the system will wake * to the requested power state at the requested time. * * This acknowledgement option is only valid when the system is transitioning into a * sleep state i.e. entering a state with 0 capabilities. * * *** Limitation * This acknowledgement argument may only be successfully used with * the requirements bitfield * kIOPMCapabilityDisk | kIOPMCapabilityNetwork * */ #define kIOPMAckNetworkMaintenanceWakeDate CFSTR("NetworkMaintenanceWakeDate") /*! kIOPMAckTimerPluginWakeDate * * This string can be used as a key in the 'options' dictionary * argument to IOPMConnectionAcknowledgeEventWithOptions. * - Caller should set a CFDate value to match this key. * - Caller should set the kIOPMAcknowledgmentOptionSystemCapabilityRequirements key too. * * The System timer plugin should populate this option to specify the next wakeup * date. * * Passing this "Date" option lets a caller request a maintenance wake * from the system at a later date. If possible, the system will wake * to the requested power state at the requested time. * * This acknowledgement option is only valid when the system is transitioning into a * sleep state i.e. entering a state with 0 capabilities. * * *** Limitation * This acknowledgement argument may only be successfully used with * the requirements bitfield * kIOPMCapabilityDisk | kIOPMCapabilityNetwork * */ #define kIOPMAckTimerPluginWakeDate CFSTR("TimerPluginWakeDate") /*! kIOPMAcknowledgmentOptionDate * * Callers should prefer to use a more specific key instead of this key: * kIOPMAckNetworkMaintenanceWakeDate * kIOPMAckSleepTimerWakeDate * * This string can be used as a key in the 'options' dictionary * argument to IOPMConnectionAcknowledgeEventWithOptions. * * Passing this "Date" option lets a caller request a maintenance wake * from the system at a later date. If possible, the system will wake * to the requested power state at the requested time. * * This acknowledgement option is only valid when the system is transitioning into a * sleep state i.e. entering a state with 0 capabilities. * * *** Limitation * This acknowledgement argument may only be successfully used with * the requirements bitfield * kIOPMCapabilityDisk | kIOPMCapabilityNetwork * */ #define kIOPMAcknowledgmentOptionWakeDate CFSTR("WakeDate") #define kIOPMAckWakeDate kIOPMAcknowledgmentOptionWakeDate /*! kIOPMAcknowledgmentOptionSystemCapabilityRequirements * * This string can be used as a key in the 'options' dictionary * argument to IOPMConnectionAcknowledgeEventWithOptions, or as * an argument to IOPMSystemPowerStateSupportsAcknowledgementOption(). * * This string should only be specified if the key * kIOPMAcknowledgementOptionDate is also specified. * * In the 'options' acknowledgement dictionary, specify a CFNumber that you * contains a bitfield describing the capabilities your process requires at the next * maintenance wake. * * This acknowledgement option is only valid when the system is transitioning into a * sleep state i.e. entering a state with 0 capabilities. * * *** Limitation * This acknowledgement argument may only be successfully used with * the requirements bitfield * kIOPMCapabilityDisk | kIOPMCapabilityNetwork * */ #define kIOPMAcknowledgmentOptionSystemCapabilityRequirements CFSTR("Requirements") #define kIOPMAckSystemCapabilityRequirements kIOPMAcknowledgmentOptionSystemCapabilityRequirements /*! * @constant kIOPMAcknowledgementOptionSleepServiceDate * * This string can be used as a key in the 'options' dictionary * argument to IOPMConnectionAcknowledgeEventWithOptions, or as * an argument to IOPMSystemPowerStateSupportsAcknowledgementOption(). * * Only sleepservicesd should pass this argument. Behavior if passed from any other process * is undefined. * * Passing this "Date" option lets a caller request a SleepServices wake * from the system at a later date. If possible, the system will wake * and perform SleepServices activity at the specified time. * * This acknowledgement option is only valid when the system is transitioning into a * sleep state i.e. entering a state with 0 capabilities. * */ #define kIOPMAcknowledgementOptionSleepServiceDate CFSTR("SleepServiceDate") #define kIOPMAckSleepServiceDate kIOPMAcknowledgementOptionSleepServiceDate /*! * @constant kIOPMAckSleepServiceCapTimeout * * This string can be used as a key in the 'options' dictionary * argument to IOPMConnectionAcknowledgeEventWithOptions, or as * an argument to IOPMSystemPowerStateSupportsAcknowledgementOption(). * * Please pass a CFNumber kCFNumberIntType, with a value in milliseconds. * e.g. Pass 120000 to specify a 2 minute cap. * * Only sleepservicesd should pass this argument. Behavior if passed from any other process * is undefined. * * Passing this "cap" option lets a caller specify how long a SleepServices wakeup * may last. PM will enforce that the system returns to sleep after this many milliseconds have elapsed. * * This acknowledgement option is only valid when the system is transitioning into a * sleep state i.e. entering a state with 0 capabilities. * */ #define kIOPMAcknowledgeOptionSleepServiceCapTimeout CFSTR("SleepServiceTimeout") #define kIOPMAckSleepServiceCapTimeout kIOPMAcknowledgeOptionSleepServiceCapTimeout /* * @constant kIOPMAckClientInfo * * Optional key for IOPMConnectionAcknoweledgeEventWithOptions() dictionary. * * The caller may set this key to a CFString with a reason or cause for this * DarkWake request. * * The string should be a reason, process name, pid, or strings that's useful * for debugging. The value will be logged into "pmset -g log" along with * the name of the calling process. */ #define kIOPMAckClientInfoKey CFSTR("ClientInfo") /*****************************************************************************/ /*****************************************************************************/ /*! * @function IOPMConnectionGetSystemCapabilities * * @abstract Gets the instantaneous system power capabilities. * * @discussion Checking the system capabilities can help distinguish whether the system is in DarkWake, * UserActive wake, or if it's on the way to sleep. * * @result A bitfield describing whether the system is asleep, awake, or in dark wake, * using kIOPMCapability bits. */ IOPMCapabilityBits IOPMConnectionGetSystemCapabilities(void); /*! @define kIOPMSleepWakeInterest * Pass this as an argument to the <code>interests</code> field of IOPMConnectionCreate() to * receive notifications for Sleep, FullWake, and DarkWake system events. */ #define kIOPMSleepWakeInterest (kIOPMCapabilityCPU | kIOPMCapabilityDisk | kIOPMCapabilityNetwork \ | kIOPMCapabilityVideo | kIOPMCapabilityAudio) /*! * IOPMConnectionCreate() opens an IOPMConnection. * * IOPMConnections provide access to power management notifications. They are a * replacement for the existing IORegisterForSystemPower() API, and provide * newer functionality and logging as well. * * Clients are expected to also call IOPMConnectionSetNotification() and * IOPMConnectionScheduleWithRunLoop() in order to receive notifications. * * @param myName Caller should provide a CFStringRef describing its identity, * for logging. * @param interests A bitfield of IOPMCapabilityBits defining * which capabilites the caller is interested in. Caller will only be notified * of changes to the bits specified here. * Most callers should pass in the argument kIOPMSleepWakeInterest for the usual * sleep, wake, and darkwake notifications. * @param newConnection Upon success this will be populated with a fresh IOPMConnection. * The caller must release this with a call to IOPMReleaseConnection. * @result Returns kIOReturnSuccess; otherwise on failure. */ IOReturn IOPMConnectionCreate( CFStringRef myName, IOPMCapabilityBits interests, IOPMConnection *newConnection ) __OSX_AVAILABLE_STARTING(__MAC_10_6, __IPHONE_NA); /*! * IOPMConnectionSetNotification associates a notificiation handler with an IOPMConnection * @discussion Caller must also call IOPMConnectionScheduleWithRunLoop to setup the notification. * @param param User-supplied pointer will be passed to all invocations of handler. * This call does not retain the *param struct; caller must ensure that the pointer is * retained. * @param myConnection The IOPMConnection created by calling <code>@link IOPMConnectionCreate @/link<code> * @param handler Ths function pointer will be invoked every time an event of interest * occurs. */ IOReturn IOPMConnectionSetNotification( IOPMConnection myConnection, void *param, IOPMEventHandlerType handler ) __OSX_AVAILABLE_STARTING(__MAC_10_6, __IPHONE_NA); /*! * IOPMConnectionScheduleWithRunLoop schedules a notification on the specified runloop. * @discussion The connection must be unscheduled by calling * IOPMConnectionUnscheduleFromRunLoop. * @param myConnection The IOPMConnection created by calling <code>@link IOPMConnectionCreate @/link</code> * @param theRunLoop A pointer to the run loop that the caller wants the callback * scheduled on. Invoking IOPMConnectionRelease will remove the notification from the * notification from the specified runloop. * @result Returns kIOReturnSuccess; otherwise on failure. */ IOReturn IOPMConnectionScheduleWithRunLoop( IOPMConnection myConnection, CFRunLoopRef theRunLoop, CFStringRef runLoopMode ) __OSX_AVAILABLE_STARTING(__MAC_10_6, __IPHONE_NA); /*! * IOPMConnectionUnscheduleFromRunLoop removes a previously scheduled run loop source. * @param myConnection The IOPMConnection created by calling <code>@link IOPMConnectionCreate @/link</code> * @param theRunLoop A pointer to the run loop that the caller has previously scheduled * a connection upon. * @result Returns kIOReturnSuccess; otherwise on failure. */ IOReturn IOPMConnectionUnscheduleFromRunLoop( IOPMConnection myConnection, CFRunLoopRef theRunLoop, CFStringRef runLoopMode ) __OSX_AVAILABLE_STARTING(__MAC_10_6, __IPHONE_NA); /*! * @function IOPMConnectionSetDispatchQueue * @abstract Schedule or un-schedule IOPMConnection callbacks on a dispatch queue. * @discussion The caller should set a callback via <code>@link IOPMConnectionSetNotification @/link</code> * before setting the dispatch queue. * @param myConnection The IOPMConnection created by a call to <code>@link IOPMConnectionCreate @/link</code> * @param myQueue The dispatch queue to schedule notifications on. * Pass NULL to cancel dispatch queue notifications. * If the caller passes in a concurrent dispatch_queue_t, sometimes the notification * handler can be invoked concurrently (e.g. if the caller fails to respond with * <code>@link IOPMConnectionAcknowledgeEvent @/link</code> before the notification times out). */ void IOPMConnectionSetDispatchQueue( IOPMConnection myConnection, dispatch_queue_t myQueue) __OSX_AVAILABLE_STARTING(__MAC_10_7, __IPHONE_NA); /*! * IOPMConnectionRelease cleans up state and notifications for a given * PM connection. This will not remove any scheduled run loop sources - it is the caller's * responsibility to remove all scheduled run loop sources. * @param connection Connection to release. * @result Returns kIOReturnSuccess; otherwise on failure. */ IOReturn IOPMConnectionRelease( IOPMConnection connection ) __OSX_AVAILABLE_STARTING(__MAC_10_6, __IPHONE_NA); /*! Acknowledge a power management event. * * All IOPMConnection notifications must be acknowledged by calling IOPMConnectAcknowledgeEvent, * or IOPMConnectAcknowledgeEventWithOptions. The caller may invoke IOPMConnectAcknowledgeEvent * immediately from within its own notify handler, or the caller may invoke acknowledge * the notification from another context. * * @param connect A valid IOPMConnection object * @param token A unique token identifying the message this acknowledgement refers to. This token * should have been received as an argument to the IOPMEventHandlerType handler. */ IOReturn IOPMConnectionAcknowledgeEvent( IOPMConnection connect, IOPMConnectionMessageToken token ) __OSX_AVAILABLE_STARTING(__MAC_10_6, __IPHONE_NA); /*! Acknowledge a power management event with additional options. * * To request a maintenance wake while acknowledging a system sleep event, * the caller should create an 'options' dictionary with values set for keys * kIOPMAcknowledgmentOptionWakeDate * and kIOPMAcknowledgmentOptionSystemCapabilityRequirements * * Note that requesting a maintenance wake is only meaningful if the system is transitioning * into a sleep state; that is, only if the capabilities flags are all 0. * * @param connect A valid IOPMConnection object * @param token A unique token identifying the message this acknowledgement refers to. * @param options If the response type requires additonal arguments, they may be placed * as objects in the "options" dictionary using * any of the kIOPMAcknowledgementOption* strings as dictionary keys. * Passing NULL for options is equivalent to calling * IOPMConnectionAcknowledgeEvent() * @result Returns kIOReturnSuccess; otherwise on failure. */ IOReturn IOPMConnectionAcknowledgeEventWithOptions( IOPMConnection connect, IOPMConnectionMessageToken token, CFDictionaryRef options ) __OSX_AVAILABLE_STARTING(__MAC_10_6, __IPHONE_NA); /*! @group IOPower Assertion SPI */ typedef enum { kIOPMSystemSleepReverted, kIOPMSystemSleepNotReverted } IOPMSystemState; /*! * @function IOPMAssertionDeclareSystemActivity * * @abstract Declares to the power management policy mechanism that a system process * is performing a critical activity. PM policy will try to to take this * hint into account when dynamically switching between system run-modes. * * @discussion No special privileges are necessary to make this call - any process may * call this API. Caller must specify an AssertionName - NULL is not * a valid input. * * @param AssertionName A string that describes the name of the caller and the activity being * handled by this assertion (e.g. "Baseband reboot in progress"). * Name may be no longer than 128 characters. * * @param AssertionID On Success, unique id will be returned in this parameter. Caller must * call <code>@link IOPMAssertionRelease@/link</code> on this unique ID * to indicate to PM policy that the critical activity was completed. * * @param SystemState This parameter returns one of 2 values depending upon the run-mode * of the system: * * kIOPMSystemSleepReverted - * This return value suggests that PM policy was able to * successfully act on the hint that there is a critical system * activity in progress. The policy mechanism will try its best * not to transition run-modes until * <code>@link IOPMAssertionRelease@/link</code> gets called on * the AssertionID * * kIOPMSystemSleepNotReverted - * This return value suggests that PM policy was not able to act * on the hint that there is a critical system activity in progress. * Typically, this is because the system is very late in the * process of transitioning between run-modes and PM policy * could not back out of the transition. PM will try to schedule * an immediate wakeup so that the system activity may be completed, * but it won't be able to revert/cancel the pending run-mode * transition. * Upon susbsequent system wakeup, the policy mechanism will try its * best not to transition run-modes till * <code>@link IOPMAssertionRelease@/link</code> gets called on the * AssertionID. * * @result Returns kIOReturnSuccess on success, any other return indicates * PM could not successfully activate the specified assertion. */ IOReturn IOPMAssertionDeclareSystemActivity( CFStringRef AssertionName, IOPMAssertionID *AssertionID, IOPMSystemState *SystemState); IOReturn IOPMChangeSystemActivityAssertionBehavior(uint32_t newFlags, uint32_t *oldFlags); /* * @function IOPMUserIsActive * * @abstract Indicates whether the system is awake for user activity. * * @discussion IOPMUserIsActive() distinguishes whether the system is awake because of a user generated event, * or a notification event via <code>IOPMAssertionDeclareNotificationEvent</code>. * <code>IOPMUserIsActive</code> returns true for 5 minutes following a user event, and any time a user active assertion is held. * If the display is asleep, or the system is in DarkWake, IOPMUserIsActive will return false. * User activity events include: * <ul><li>HID events * <li>Lid open * <li>Scheduled RTC wakes * <li>IOPMAssertionDeclareUserActivity() * </ul> * * @result true or false. */ bool IOPMUserIsActive(void); typedef uintptr_t IOPMNotificationHandle; /* * @function IOPMScheduleUserActiveNotification * * @param queue The dispatch_queue to schedule the callout on. * * @param block The block to execute when the "user is active" state changes. * * @result NULL on failure. Upon success, caller should store the <code>IOPMNotificationHandle</code> and pass it to * <code>IOPMUnregisterNotification</code> to stop receiving notifications. */ IOPMNotificationHandle IOPMScheduleUserActiveChangedNotification(dispatch_queue_t queue, void (^block)(bool)); /* * @function IOPMUnregisterNotification * * @abstract Cancel and release an <code>IOPMNotificationHandle</code> */ void IOPMUnregisterNotification(IOPMNotificationHandle handle); /*! * @function IOPMAssertionDeclareNotificationEvent * * @abstract Temporarily light the display to ensure notifications are visible to users. * * @discussion <ul><li>IOPMAssertionDeclareNotificationEvent shall light the display if * it's not already lit. The display shall remain lit either * <ol><li> for the interval specified in secondsToDisplay, * <li> or until the caller releases the returned AssertionID with IOPMAssertionRelease() * <li> or until a user action intervenes and sleeps the display (lid close, system sleep, system shutdown). * </ol> * <li> IOPMAssertionDeclareNotificationEvent is intended only for NotificationCenter. * <li> IOPMAssertionDeclareNotificationEvent shall require an entitlement to execute. * <li> When secondsToDisplay timer expires, the display, and Display Sleep idle timers, shall return to their previous state. * <li> If the Mac lit the display to display the notification, the Mac shall dim the display promptly upon completion (unless other system activity would keep the display awake). * <li> If the Mac woke from sleep to display this message, the Mac shall return to sleep promptly upon completion (unless other system activity would keep the Mac awake). * <li> IOPMAssertionDeclareNotificationEvent shall not light the screen if the lid is closed. * <li> IOPMAssertionDeclareNotificationEvent will not modify the user's chosen brightness setting. When the display lights, it will light to the user's previously chosen brightness setting. * <li> IOPMAssertionDeclareNotificationEvent shall not affect the user's HID idleness counters; and it shall not interrupt regular idle display sleep timers. * <li> If Display Sleep == 10 minutes, and the user has been idle for 9 minutes, and NC calls IOPMAssertionDeclareNotificationEvent(secondsToDisplay=5.0) then the display shall still idle sleep at 10 minutes. * </ul> * * @param notificationName A human-readable string (it can be reverse-DNS), * describing the event your App is displaying to the user. * This key is present for admin and debugging use with: * pmset -g log; pmset -g assertions; pmset -g assertionslog * @param secondsToDisplay CFTimeInterval number of seconds to keep the display lit. * @param AssertionID Optional return value. Upon success, AssertionID will point * to a valid power assertion. To call IOPMAssertionDeclareNotificationEvent, * repeatedly please reuse the returned assertion ID. * You can also call IOPMAssertionRelease(AssertionID) to release the power * assertion (and possibly dim the display) before the secondsToDisplay timer fires. * @result <ul><li>kIOReturnSuccess on success. * <li>kIOReturnNotPrivileged for missing entitlement or privilege. * <li>kIOReturnNotReady if OS X cannot light the display (e.g. lid closed) * <li>kIOReturnError otherwise. </ul> */ IOReturn IOPMAssertionDeclareNotificationEvent( CFStringRef notificationName, CFTimeInterval secondsToDisplay, IOPMAssertionID *AssertionID) __OSX_AVAILABLE_STARTING(__MAC_10_9, __IPHONE_NA); /*! * kIOPMSleepServiceActiveNotifyName * * This API is optional; use <code>IOPMGetSleepServicesActive()</code> for thee easiest way * to query this information. * Listen for changes to the SleepServices state from 0 to 1 and from 1 to 0 on this notify bit. * Powerd calls this notification when it enters and exits a SleepService waiting state. */ #define kIOPMSleepServiceActiveNotifyName "com.apple.powermanagement.sleepservices" /*! * kIOPMSleepServiceActiveNotifyBit * When set, this bit indicates the system is handling SleepServices work. * * You should probably use <code>IOPMGetSleepServicesActive</code> instead of this * for the easiest way to query this state. */ #define kIOPMSleepServiceActiveNotifyBit (1 << 0) /*! * @function IOPMGetSleepServicesActive * * @abstract Checks whether we're staying awake to do SleepServices work at this instant. * * @result Returns true starting after SleepServicesd communicates a SleepService Wakeup Cap time; * and ending when that cap time expires. */ bool IOPMGetSleepServicesActive(void); /*! * @function IOPMGetDarkWakeThermalEmergencyCount * * @abstract Returns the number of times that a Fanless DarkWake slept instead of turning fans on. * * @discussion A DarkWake Thermal emergency implies that the processes still held power assertions, * and were still doing useful work at the time. * A "DarkWake Thermal emergency" (where the system must sleep rather than engage the fans) * is different than a system-wide "Thermal emergency" (where the system must sleep because * the fans cannot dissipate heat.) This API records the former. * * Use this SPI for statistics gathering only. * * @result Zero at boot, increments on every DarkWake Thermal Emergency thereafter. */ int IOPMGetDarkWakeThermalEmergencyCount(void); /*! @group Debug SPI */ /* * Selctor arguments to IOPMGetValueInt and IOPMSetValueInt */ enum { kIOPMGetSilentRunningInfo = 1, kIOPMMT2Bookmark, kIOPMSetNoPoll, kIOPMDarkWakeThermalEventCount, kIOPMTCPKeepAliveExpirationOverride, kIOPMTCPKeepAliveIsActive, kIOPMTCPWakeQuota, kIOPMTCPWakeQuotaInterval }; /*! * @function IOPMGetValueInt * @abstract For IOKit use only. */ int IOPMGetValueInt(int selector); /*! * @function IOPMSetValueInt * @abstract For IOKit use only. */ void IOPMSetValueInt(int selector, int value); #define kIOPMDebugEnableAssertionLogging 0x1 #define kIOPMDebugLogAssertionSynchronous 0x2 #define kIOPMDebugLogCallbacks 0x4 #define kIOPMDebugAppTimeoutStackshot 0x8 IOReturn IOPMSetDebugFlags(uint32_t newFlags, uint32_t *oldFlags); IOReturn IOPMSetBTWakeInterval(uint32_t newInterval, uint32_t *oldInterval); IOReturn IOPMSetDWLingerInterval(uint32_t newInterval, uint32_t *oldInterval); /* ops for IOPMCtlAssertionType() */ #define kIOPMDisableAssertionType 0x1 #define kIOPMEnableAssertionType 0x2 IOReturn IOPMCtlAssertionType(char *type, int op); /*! @group IOReporting power SPI */ /* * Keys used in the dictionary returned by IOPMCopyPowerStateInfo() */ #define kIOPMNodeCurrentState CFSTR("CurrentState") #define kIOPMNodeMaxState CFSTR("MaxState") #define kIOPMNodeIsPowerOn CFSTR("IsPowerOn") #define kIOPMNodeIsDeviceUsable CFSTR("IsDeviceUsable") #define kIOPMNodeIsLowPower CFSTR("IsLowPower") /*! * @function IOPMCopyPowerStateInfo * * @abstract Returns a dictionary describing the state_id obtained from * IOReporting channels kPMCurrStateChID and kPMPowerStatesChID. * * @discussion On sucess, caller is responsible for releasing the dictionary. * * @param state_id Caller passes the state_id value obtained from kPMCurrStateChID * and kPMPowerStatesChID channels of IOServicePM. * * @result Returns a CFDictionaryRef or NULL. Caller must CFRelease the dictionary. */ CFDictionaryRef IOPMCopyPowerStateInfo(uint64_t state_id); /* Request type(req_type) for IOPMAssertionNotify() */ enum { kIOPMNotifyRegister = 0x1, kIOPMNotifyDeRegister = 0x2 }; /* Register/De-Register for assertion change notifications * name - Type of notification. Should be one of kIOPMAssertionsAnyChangedNotifyString, * kIOPMAssertionsChangedNotifyString and kIOPMAssertionTimedOutNotifyString * req_type - Should be either kIOPMNotifyRegister or kIOPMNotifyDeRegister */ IOReturn IOPMAssertionNotify(char *name, int req_type); __END_DECLS #endif // _IOPMLibPrivate_h_