package Ima::DBI;
$VERSION = '0.33';
use strict;
use base 'Class::Data::Inheritable';
use DBI;
Ima::DBI->mk_classdata('__Database_Names');
Ima::DBI->mk_classdata('__Statement_Names');
=head1 NAME
Ima::DBI - Database connection caching and organization
=head1 SYNOPSIS
package Foo;
use base 'Ima::DBI';
# Class-wide methods.
Foo->set_db($db_name, $data_source, $user, $password);
Foo->set_db($db_name, $data_source, $user, $password, \%attr);
my @database_names = Foo->db_names;
my @database_handles = Foo->db_handles;
Foo->set_sql($sql_name, $statement, $db_name);
Foo->set_sql($sql_name, $statement, $db_name, $cache);
my @statement_names = Foo->sql_names;
# Object methods.
$dbh = $obj->db_*; # Where * is the name of the db connection.
$sth = $obj->sql_*; # Where * is the name of the sql statement.
$sth = $obj->sql_*(@sql_pieces);
$obj->DBIwarn($what, $doing);
my $rc = $obj->commit;
my $rc = $obj->commit(@db_names);
my $rc = $obj->rollback;
my $rc = $obj->rollback(@db_names);
=head1 DESCRIPTION
Ima::DBI attempts to organize and facilitate caching and more efficient
use of database connections and statement handles by storing DBI and
SQL information with your class (instead of as seperate objects).
This allows you to pass around just one object without worrying about
a trail of DBI handles behind it.
One of the things I always found annoying about writing large programs
with DBI was making sure that I didn't have duplicate database handles
open. I was also annoyed by the somewhat wasteful nature of the
prepare/execute/finish route I'd tend to go through in my subroutines.
The new DBI->connect_cached and DBI->prepare_cached helped a lot, but
I still had to throw around global datasource, username and password
information.
So, after a while I grew a small library of DBI helper routines and
techniques. Ima::DBI is the culmination of all this, put into a nice(?),
clean(?) class to be inherited from.
=head2 Why should I use this thing?
Ima::DBI is a little odd, and it's kinda hard to explain. So lemme
explain why you'd want to use this thing...
=over 4
=item * Consolidation of all SQL statements and database information
No matter what, embedding one language into another is messy.
DBI alleviates this somewhat, but I've found a tendency to have that
scatter the SQL around inside the Perl code. Ima::DBI allows you to
easily group the SQL statements in one place where they are easier to
maintain (especially if one developer is writing the SQL, another writing
the Perl). Alternatively, you can place your SQL statement alongside
the code which uses it. Whatever floats your boat.
Database connection information (data source, username, password,
atrributes, etc...) can also be consolidated together and tracked.
Both the SQL and the connection info are probably going to change a lot,
so having them well organized and easy to find in the code is a Big Help.
=item * Holds off opening a database connection until necessary.
While Ima::DBI is informed of all your database connections and SQL
statements at compile-time, it will not connect to the database until
you actually prepare a statement on that connection.
This is obviously very good for programs that sometimes never touch
the database. It's also good for code that has lots of possible
connections and statements, but which typically only use a few.
Kinda like an autoloader.
=item * Easy integration of the DBI handles into your class
Ima::DBI causes each database handle to be associated with your class,
allowing you to pull handles from an instance of your object, as well
as making many oft-used DBI methods available directly from your
instance.
This gives you a cleaner OO design, since you can now just throw
around the object as usual and it will carry its associated DBI
baggage with it.
=item * Honors taint mode
It always struck me as a design deficiency that tainted SQL statements
could be passed to $sth->prepare(). For example:
# $user is from an untrusted source and is tainted.
$user = get_user_data_from_the_outside_world;
$sth = $dbh->prepare('DELETE FROM Users WHERE User = $user');
Looks innocent enough... but what if $user was the string "1 OR User LIKE
'%'". You just blew away all your users. Hope you have backups.
Ima::DBI turns on the DBI->connect Taint attribute so that all DBI
methods (except execute()) will no longer accept tainted data.
See L<DBI/Taint> for details.
=item * Taints returned data
Databases should be like any other system call. It's the scary Outside
World, thus it should be tainted. Simple. Ima::DBI turns on DBI's Taint
attribute on each connection. This feature is overridable by passing
your own Taint attribute to set_db as normal for DBI. See L<DBI/Taint>
for details.
=item * Encapsulation of some of the more repetitive bits of everyday DBI usage
I get lazy a lot and I forget to do things I really should, like using
bind_cols(), or rigorous error checking. Ima::DBI does some of this
stuff automatically, other times it just makes it more convenient.
=item * Encapsulation of DBI's cache system
DBI's automatic handle caching system is relatively new, and some people
aren't aware of its use. Ima::DBI uses it automatically, so you don't
have to worry about it. (It even makes it a bit more efficient)
=item * Sharing of database and sql information amongst inherited classes
Any SQL statements and connections created by a class are available to
its children via normal method inheritance.
=item * Guarantees one connection per program.
One program, one database connection (per database user). One program,
one prepared statement handle (per statement, per database user).
That's what Ima::DBI enforces. Extremely handy in persistant environments
(servers, daemons, mod_perl, FastCGI, etc...)
=item * Encourages use of bind parameters and columns
Bind parameters are safer and more efficient than embedding the column
information straight into the SQL statement. Bind columns are more
efficient than normal fetching. Ima::DBI pretty much requires the usage
of the former, and eases the use of the latter.
=back
=head2 Why shouldn't I use this thing.
=over 4
=item * It's all about OO
Although it is possible to use Ima::DBI as a stand-alone module as
part of a function-oriented design, its generally not to be used
unless integrated into an object-oriented design.
=item * Overkill for small programs
=item * Overkill for programs with only one or two SQL statements
Its up to you whether the trouble of setting up a class and jumping
through the necessary Ima::DBI hoops is worth it for small programs.
To me, it takes just as much time to set up an Ima::DBI subclass as it
would to access DBI without it... but then again I wrote the module.
YMMV.
=item * Overkill for programs that only use their SQL statements once
Ima::DBI's caching might prove to be an unecessary performance hog if
you never use the same SQL statement twice. Not sure, I haven't
looked into it.
=back
=head1 USAGE
The basic steps to "DBIing" a class are:
=over 4
=item 1
Inherit from Ima::DBI
=item 2
Set up and name all your database connections via set_db()
=item 3
Set up and name all your SQL statements via set_sql()
=item 4
Use sql_* to retrieve your statement handles ($sth) as needed and db_*
to retreive database handles ($dbh).
=back
Have a look at L<EXAMPLE> below.
=head1 TAINTING
Ima::DBI, by default, uses DBI's Taint flag on all connections.
This means that Ima::DBI methods do not accept tainted data, and that all
data fetched from the database will be tainted. This may be different
from the DBI behavior you're used to. See L<DBI/Taint> for details.
=head1 METHODS
=head2 Class methods
=over 4
=item B<set_db>
Foo->set_db($db_name, $data_source, $user, $password);
Foo->set_db($db_name, $data_source, $user, $password, \%attr);
This method is used in place of DBI->connect to create your database
handles. It sets up a new DBI database handle associated to $db_name.
All other arguments are passed through to DBI->connect_cached.
A new method is created for each db you setup. This new method is called
"db_$db_name"... so, for example, Foo->set_db("foo", ...) will create
a method called "db_foo()". (Spaces in $db_name will be translated into
underscores: '_')
%attr is combined with a set of defaults (RaiseError => 1, AutoCommit
=> 0, PrintError => 0, Taint => 1). This is a better default IMHO,
however it does give databases without transactions (such as MySQL) a
hard time. Be sure to turn AutoCommit back on if your database does
not support transactions.
The actual database handle creation (and thus the database connection)
is held off until a prepare is attempted with this handle.
=cut
sub _croak { my $self = shift; require Carp; Carp::croak(@_) }
sub set_db {
my $class = shift;
my $db_name = shift or $class->_croak("Need a db name");
$db_name =~ s/\s/_/g;
my $data_source = shift or $class->_croak("Need a data source");
my $user = shift || "";
my $password = shift || "";
my $attr = shift || {};
ref $attr eq 'HASH' or $class->_croak("$attr must be a hash reference");
$attr = $class->_add_default_attributes($attr);
$class->_remember_handle($db_name);
no strict 'refs';
*{ $class . "::db_$db_name" } =
$class->_mk_db_closure($data_source, $user, $password, $attr);
return 1;
}
sub _add_default_attributes {
my ($class, $user_attr) = @_;
my %attr = $class->_default_attributes;
@attr{ keys %$user_attr } = values %$user_attr;
return \%attr;
}
sub _default_attributes {
(
RaiseError => 1,
AutoCommit => 0,
PrintError => 0,
Taint => 1,
RootClass => "DBIx::ContextualFetch"
);
}
sub _remember_handle {
my ($class, $db) = @_;
my $handles = $class->__Database_Names || [];
push @$handles, $db;
$class->__Database_Names($handles);
}
sub _mk_db_closure {
my ($class, @connection) = @_;
my $dbh;
return sub {
unless ($dbh && $dbh->FETCH('Active') && $dbh->ping) {
$dbh = DBI->connect_cached(@connection);
}
return $dbh;
};
}
=pod
=item B<set_sql>
Foo->set_sql($sql_name, $statement, $db_name);
Foo->set_sql($sql_name, $statement, $db_name, $cache);
This method is used in place of DBI->prepare to create your statement
handles. It sets up a new statement handle associated to $sql_name using
the database connection associated with $db_name. $statement is passed
through to either DBI->prepare or DBI->prepare_cached (depending on
$cache) to create the statement handle.
If $cache is true or isn't given, then prepare_cached() will be used to
prepare the statement handle and it will be cached. If $cache is false
then a normal prepare() will be used and the statement handle will be
recompiled on every sql_*() call. If you have a statement which changes
a lot or is used very infrequently you might not want it cached.
A new method is created for each statement you set up. This new method
is "sql_$sql_name"... so, as with set_db(), Foo->set_sql("bar", ...,
"foo"); will create a method called "sql_bar()" which uses the database
connection from "db_foo()". Again, spaces in $sql_name will be translated
into underscores ('_').
The actual statement handle creation is held off until sql_* is first
called on this name.
To make up for the limitations of bind parameters, $statement can contain
sprintf() style formatting (ie. %s and such) to allow dynamically
generated SQL statements (so to get a real percent sign, use '%%').
See sql_* below for more details.
=cut
sub set_sql {
my ($class, $sql_name, $statement, $db_name, $cache) = @_;
$cache = 1 unless defined $cache;
my $db_meth = $db_name;
$db_meth =~ s/\s/_/g;
$db_meth = "db_$db_meth";
(my $sql_meth = $sql_name) =~ s/\s/_/g;
$sql_meth = "sql_$sql_meth";
my $handles = $class->__Statement_Names || [];
push @$handles, $sql_name;
$class->__Statement_Names($handles);
no strict 'refs';
*{ $class . "::$sql_meth" } =
$class->_mk_sql_closure($sql_name, $statement, $db_meth, $cache);
return 1;
}
sub _mk_sql_closure {
my ($class, $sql_name, $statement, $db_meth, $cache) = @_;
return sub {
my $class = shift;
my $dbh = $class->$db_meth();
my $sql = $class->transform_sql($statement => @_);
return $cache
? $dbh->prepare_cached($sql)
: $dbh->prepare($sql);
};
}
sub transform_sql {
my ($class, $sql, @args) = @_;
return sprintf $sql, @args;
}
=item B<db_names>
=item B<db_handles>
my @database_names = Foo->db_names;
my @database_handles = Foo->db_handles;
my @database_handles = Foo->db_handles(@db_names);
Returns a list of the database handles set up for this class using
set_db(). This includes all inherited handles.
db_names() simply returns the name of the handle, from which it is
possible to access it by converting it to a method name and calling
that db method...
my @db_names = Foo->db_names;
my $db_meth = 'db_'.$db_names[0];
my $dbh = $foo->$db_meth;
Icky, eh? Fortunately, db_handles() does this for you and returns a
list of database handles in the same order as db_names(). B<Use this
sparingly> as it will connect you to the database if you weren't
already connected.
If given @db_names, db_handles() will return only the handles for
those connections.
These both work as either class or object methods.
=cut
sub db_names { @{ $_[0]->__Database_Names || [] } }
sub db_handles {
my ($self, @db_names) = @_;
@db_names = $self->db_names unless @db_names;
return map $self->$_(), map "db_$_", @db_names;
}
=item B<sql_names>
my @statement_names = Foo->sql_names;
Similar to db_names() this returns the names of all SQL statements set
up for this class using set_sql(), inherited or otherwise.
There is no corresponding sql_handles() because we can't know what
arguments to pass in.
=cut
sub sql_names { @{ $_[0]->__Statement_Names || [] } }
=back
=head2 Object methods
=over 4
=item B<db_*>
$dbh = $obj->db_*;
This is how you directly access a database handle you set up with set_db.
The actual particular method name is derived from what you told set_db.
db_* will handle all the issues of making sure you're already
connected to the database.
=item B<sql_*>
$sth = $obj->sql_*;
$sth = $obj->sql_*(@sql_pieces);
sql_*() is a catch-all name for the methods you set up with set_sql().
For instance, if you did:
Foo->set_sql('GetAllFoo', 'Select * From Foo', 'SomeDb');
you'd run that statement with sql_GetAllFoo().
sql_* will handle all the issues of making sure the database is
already connected, and the statement handle is prepared. It returns a
prepared statement handle for you to use. (You're expected to
execute() it)
If sql_*() is given a list of @sql_pieces it will use them to fill in
your statement, assuming you have sprintf() formatting tags in your
statement. For example:
Foo->set_sql('GetTable', 'Select * From %s', 'Things');
# Assuming we have created an object... this will prepare the
# statement 'Select * From Bar'
$sth = $obj->sql_Search('Bar');
Be B<very careful> with what you feed this function. It cannot
do any quoting or escaping for you, so it is totally up to you
to take care of that. Fortunately if you have tainting on you
will be spared the worst.
It is recommended you only use this in cases where bind parameters
will not work.
=item B<DBIwarn>
$obj->DBIwarn($what, $doing);
Produces a useful error for exceptions with DBI.
B<I'm not particularly happy with this interface>
Most useful like this:
eval {
$self->sql_Something->execute($self->{ID}, @stuff);
};
if($@) {
$self->DBIwarn($self->{ID}, 'Something');
return;
}
=cut
sub DBIwarn {
my ($self, $thing, $doing) = @_;
my $errstr = "Failure while doing '$doing' with '$thing'\n";
$errstr .= $@ if $@;
require Carp;
Carp::carp $errstr;
return 1;
}
=back
=head2 Modified database handle methods
Ima::DBI makes some of the methods available to your object that are
normally only available via the database handle. In addition, it
spices up the API a bit.
=over 4
=item B<commit>
$rc = $obj->commit;
$rc = $obj->commit(@db_names);
Derived from $dbh->commit() and basically does the same thing.
If called with no arguments, it causes commit() to be called on all
database handles associated with $obj. Otherwise it commits all
database handles whose names are listed in @db_names.
Alternatively, you may like to do: $rc = $obj->db_Name->commit;
If all the commits succeeded it returns true, false otherwise.
=cut
sub commit {
my ($self, @db_names) = @_;
return grep(!$_, map $_->commit, $self->db_handles(@db_names)) ? 0 : 1;
}
=pod
=item B<rollback>
$rc = $obj->rollback;
$rc = $obj->rollback(@db_names);
Derived from $dbh->rollback, this acts just like Ima::DBI->commit,
except that it calls rollback().
Alternatively, you may like to do: $rc = $obj->db_Name->rollback;
If all the rollbacks succeeded it returns true, false otherwise.
=cut
sub rollback {
my ($self, @db_names) = @_;
return grep(!$_, map $_->rollback, $self->db_handles(@db_names)) ? 0 : 1;
}
=pod
=back
=head1 EXAMPLE
package Foo;
use base qw(Ima::DBI);
# Set up database connections (but don't connect yet)
Foo->set_db('Users', 'dbi:Oracle:Foo', 'admin', 'passwd');
Foo->set_db('Customers', 'dbi:Oracle:Foo', 'Staff', 'passwd');
# Set up SQL statements to be used through out the program.
Foo->set_sql('FindUser', <<"SQL", 'Users');
SELECT *
FROM Users
WHERE Name LIKE ?
SQL
Foo->set_sql('ChangeLanguage', <<"SQL", 'Customers');
UPDATE Customers
SET Language = ?
WHERE Country = ?
SQL
# rest of the class as usual.
package main;
$obj = Foo->new;
eval {
# Does connect & prepare
my $sth = $obj->sql_FindUser;
# bind_params, execute & bind_columns
$sth->execute(['Likmi%'], [\($name)]);
while( $sth->fetch ) {
print $name;
}
# Uses cached database and statement handles
$sth = $obj->sql_FindUser;
# bind_params & execute.
$sth->execute('%Hock');
@names = $sth->fetchall;
# connects, prepares
$rows_altered = $obj->sql_ChangeLanguage->execute(qw(es_MX mx));
};
unless ($@) {
# Everything went okay, commit the changes to the customers.
$obj->commit('Customers');
}
else {
$obj->rollback('Customers');
warn "DBI failure: $@";
}
=head1 TODO, Caveat, BUGS, etc....
=over 4
=item I seriously doubt that it's thread safe.
You can bet cupcackes to sno-cones that much havoc will be wrought if
Ima::DBI is used in a threaded Perl.
=item Should make use of private_* handle method to store information
=item The docs stink.
The docs were originally written when I didn't have a good handle on
the module and how it will be used in practical cases. I need to
rewrite the docs from the ground up.
=item Need to add debugging hooks.
The thing which immediately comes to mind is a Verbose flag to print
out SQL statements as they are made as well as mention when database
connections are made, etc...
=back
=head1 MAINTAINER
Tony Bowden <tony@tmtm.com>
=head1 ORIGINAL AUTHOR
Michael G Schwern <schwern@pobox.com>
=head1 LICENSE
This module is free software. You may distribute under the same terms
as Perl itself. IT COMES WITHOUT WARRANTY OF ANY KIND.
=head1 THANKS MUCHLY
Tim Bunce, for enduring many DBI questions and adding Taint,
prepare_cached and connect_cached methods to DBI, simplifying this
greatly!
Arena Networks, for effectively paying for Mike to write most of this
module.
=head1 SEE ALSO
L<DBI>.
You may also choose to check out L<Class::DBI> which hides most of this
from view.
=cut
return 1001001;