/*- * See the file LICENSE for redistribution information. * * Copyright (c) 2001,2008 Oracle. All rights reserved. * * $Id: rep.h,v 12.111 2008/05/02 15:19:43 sue Exp $ */ #ifndef _DB_REP_H_ #define _DB_REP_H_ #include "dbinc_auto/rep_auto.h" #if defined(__cplusplus) extern "C" { #endif /* * Names of client temp databases. */ #define REPDBNAME "__db.rep.db" #define REPPAGENAME "__db.reppg.db" /* * Message types */ #define REP_INVALID 0 /* Invalid message type. */ #define REP_ALIVE 1 /* I am alive message. */ #define REP_ALIVE_REQ 2 /* Request for alive messages. */ #define REP_ALL_REQ 3 /* Request all log records greater than LSN. */ #define REP_BULK_LOG 4 /* Bulk transfer of log records. */ #define REP_BULK_PAGE 5 /* Bulk transfer of pages. */ #define REP_DUPMASTER 6 /* Duplicate master detected; propagate. */ #define REP_FILE 7 /* Page of a database file. NOTUSED */ #define REP_FILE_FAIL 8 /* File requested does not exist. */ #define REP_FILE_REQ 9 /* Request for a database file. NOTUSED */ #define REP_LEASE_GRANT 10 /* Client grants a lease to a master. */ #define REP_LOG 11 /* Log record. */ #define REP_LOG_MORE 12 /* There are more log records to request. */ #define REP_LOG_REQ 13 /* Request for a log record. */ #define REP_MASTER_REQ 14 /* Who is the master */ #define REP_NEWCLIENT 15 /* Announces the presence of a new client. */ #define REP_NEWFILE 16 /* Announce a log file change. */ #define REP_NEWMASTER 17 /* Announces who the master is. */ #define REP_NEWSITE 18 /* Announces that a site has heard from a new * site; like NEWCLIENT, but indirect. A * NEWCLIENT message comes directly from the new * client while a NEWSITE comes indirectly from * someone who heard about a NEWSITE. */ #define REP_PAGE 19 /* Database page. */ #define REP_PAGE_FAIL 20 /* Requested page does not exist. */ #define REP_PAGE_MORE 21 /* There are more pages to request. */ #define REP_PAGE_REQ 22 /* Request for a database page. */ #define REP_REREQUEST 23 /* Force rerequest. */ #define REP_START_SYNC 24 /* Tell client to begin syncing a ckp.*/ #define REP_UPDATE 25 /* Environment hotcopy information. */ #define REP_UPDATE_REQ 26 /* Request for hotcopy information. */ #define REP_VERIFY 27 /* A log record for verification. */ #define REP_VERIFY_FAIL 28 /* The client is outdated. */ #define REP_VERIFY_REQ 29 /* Request for a log record to verify. */ #define REP_VOTE1 30 /* Send out your information for an election. */ #define REP_VOTE2 31 /* Send a "you are master" vote. */ /* * Maximum message number for conversion tables. Update this * value as the largest message number above increases. * * !!! * NOTE: When changing messages above, the two tables for upgrade support * need adjusting. They are in rep_util.c. */ #define REP_MAX_MSG 31 /* * This is the list of client-to-client requests messages. * We use this to decide if we're doing client-to-client and * might need to send a rerequest. */ #define REP_MSG_REQ(rectype) \ (rectype == REP_ALL_REQ || \ rectype == REP_LOG_REQ || \ rectype == REP_PAGE_REQ || \ rectype == REP_VERIFY_REQ) /* * Note that the version information should be at the beginning of the * structure, so that we can rearrange the rest of it while letting the * version checks continue to work. DB_REPVERSION should be revved any time * the rest of the structure changes or when the message numbers change. * * Define also, the corresponding log versions that are tied to the * replication/release versions. These are only used in replication * and that is why they're defined here. */ #define DB_LOGVERSION_42 8 #define DB_LOGVERSION_43 10 #define DB_LOGVERSION_44 11 #define DB_LOGVERSION_45 12 #define DB_LOGVERSION_46 13 #define DB_LOGVERSION_47 14 #define DB_LOGVERSION_MIN DB_LOGVERSION_44 #define DB_REPVERSION_INVALID 0 #define DB_REPVERSION_44 3 #define DB_REPVERSION_45 3 #define DB_REPVERSION_46 4 #define DB_REPVERSION_47 5 #define DB_REPVERSION DB_REPVERSION_47 #define DB_REPVERSION_MIN DB_REPVERSION_44 /* * RPRINT * REP_PRINT_MESSAGE * Macros for verbose replication messages. */ #define RPRINT(env, verbose_category, x) do { \ if (FLD_ISSET((env)->dbenv->verbose, \ (verbose_category) | DB_VERB_REPLICATION)) { \ __rep_print x; \ } \ } while (0) #define REP_PRINT_MESSAGE(env, eid, rp, str, fl) do { \ if (FLD_ISSET((env)->dbenv->verbose, \ DB_VERB_REP_MSGS | DB_VERB_REPLICATION)) { \ __rep_print_message(env, eid, rp, str, fl); \ } \ } while (0) /* * Election gen file name * The file contains an egen number for an election this client has NOT * participated in. I.e. it is the number of a future election. We * create it when we create the rep region, if it doesn't already exist * and initialize egen to 1. If it does exist, we read it when we create * the rep region. We write it immediately before sending our VOTE1 in * an election. That way, if a client has ever sent a vote for any * election, the file is already going to be updated to reflect a future * election, should it crash. */ #define REP_EGENNAME "__db.rep.egen" #define REP_GENNAME "__db.rep.gen" /* * Internal init flag file name: * The existence of this file serves as an indication that the client is in the * process of Internal Initialization, in case it crashes before completing. * During internal init the client's partially reconstructed database pages and * logs may be in an inconsistent state, so much so that running recovery must * be avoided. Furthermore, there is no other way to reliably recognize this * condition. Therefore, when we open an environment, and we're just about to * run recovery, we check for this file first. If it exists we must discard all * logs and databases. This avoids the recovery problems, and leads to a fresh * attempt at internal init if the environment becomes a replication client and * finds a master. The list of databases which may need to be removed is stored * in this file. */ #define REP_INITNAME "__db.rep.init" #define REP_INITVERSION_46 1 #define REP_INITVERSION_47 2 #define REP_INITVERSION 2 /* * Database types for __rep_client_dbinit */ typedef enum { REP_DB, /* Log record database. */ REP_PG /* Pg database. */ } repdb_t; /* Macros to lock/unlock the replication region as a whole. */ #define REP_SYSTEM_LOCK(env) \ MUTEX_LOCK(env, (env)->rep_handle->region->mtx_region) #define REP_SYSTEM_UNLOCK(env) \ MUTEX_UNLOCK(env, (env)->rep_handle->region->mtx_region) /* * Macros for manipulating the event synchronization. We use a separate mutex * so that an application's call-back function can be invoked without locking * the whole region. */ #define REP_EVENT_LOCK(env) \ MUTEX_LOCK(env, (env)->rep_handle->region->mtx_event) #define REP_EVENT_UNLOCK(env) \ MUTEX_UNLOCK(env, (env)->rep_handle->region->mtx_event) /* * REP -- * Shared replication structure. */ typedef struct __rep { db_mutex_t mtx_region; /* Region mutex. */ db_mutex_t mtx_clientdb; /* Client database mutex. */ db_mutex_t mtx_ckp; /* Checkpoint mutex. */ roff_t lease_off; /* Offset of the lease table. */ roff_t tally_off; /* Offset of the tally region. */ roff_t v2tally_off; /* Offset of the vote2 tally region. */ int eid; /* Environment id. */ int master_id; /* ID of the master site. */ u_int32_t version; /* Current replication version. */ u_int32_t egen; /* Replication election generation. */ u_int32_t gen; /* Replication generation number. */ u_int32_t recover_gen; /* Last generation number in log. */ u_int32_t asites; /* Space allocated for sites. */ u_int32_t nsites; /* Number of sites in group. */ u_int32_t nvotes; /* Number of votes needed. */ u_int32_t priority; /* My priority in an election. */ u_int32_t config_nsites; db_timeout_t elect_timeout; /* Normal/full election timeouts. */ db_timeout_t full_elect_timeout; db_timeout_t chkpt_delay; /* Master checkpoint delay. */ #define REP_DEFAULT_THROTTLE (10 * MEGABYTE) /* Default value is < 1Gig. */ u_int32_t gbytes; /* Limit on data sent in single... */ u_int32_t bytes; /* __rep_process_message call. */ #define DB_REP_REQUEST_GAP 40000 /* 40 msecs */ #define DB_REP_MAX_GAP 1280000 /* 1.28 seconds */ db_timespec request_gap; /* Minimum time to wait before we * request a missing log record. */ db_timespec max_gap; /* Maximum time to wait before * requesting a missing log record. */ /* Status change information */ u_int32_t apply_th; /* Number of callers in rep_apply. */ u_int32_t msg_th; /* Number of callers in rep_proc_msg.*/ u_int32_t handle_cnt; /* Count of handles in library. */ u_int32_t op_cnt; /* Multi-step operation count.*/ DB_LSN ckp_lsn; /* LSN for syncing a checkpoint. */ DB_LSN max_prep_lsn; /* Max LSN of txn_prepare record. */ /* * Event notification synchronization: the mtx_event and associate * fields which it protects govern event notification to the * application. They form a guarantee that no matter how crazy the * thread scheduling gets, the application sees a sensible, orderly * progression of events. */ db_mutex_t mtx_event; /* Serializes event notification. */ /* * Latest generation whose NEWMASTER event the application has been * notified of. Also serves to force STARTUPDONE to occur after * NEWMASTER. */ u_int32_t newmaster_event_gen; /* * Latest local victory of an election that the application has been * notified of, expressed as the election generation number. This * ensures we notify the application exactly once when it wins an * election. */ u_int32_t notified_egen; /* Backup information. */ u_int32_t nfiles; /* Number of files we have info on. */ u_int32_t curfile; /* Cur file we're getting (0-based). */ __rep_fileinfo_args *curinfo; /* Current file info ptr. */ u_int8_t *finfo; /* Current file info buffer. */ u_int8_t *nextinfo; /* Next file info buffer. */ u_int8_t *originfo; /* Original file info buffer. */ u_int32_t infolen; /* Remaining length file info buffer. */ u_int32_t originfolen; /* Original length file info buffer. */ u_int32_t infoversion; /* Original file info version. */ DB_LSN first_lsn; /* Earliest LSN we need. */ u_int32_t first_vers; /* Log version of first log file. */ DB_LSN last_lsn; /* Latest LSN we need. */ db_pgno_t ready_pg; /* Next pg expected. */ db_pgno_t waiting_pg; /* First pg after gap. */ db_pgno_t max_wait_pg; /* Maximum pg requested. */ u_int32_t npages; /* Num of pages rcvd for this file. */ DB_MPOOLFILE *file_mpf; /* Mpoolfile for current database. */ DB *file_dbp; /* This file's page info. */ DBC *queue_dbc; /* Dbc for a queue file. */ /* Vote tallying information. */ u_int32_t sites; /* Sites heard from. */ int winner; /* Current winner EID. */ u_int32_t w_priority; /* Winner priority. */ u_int32_t w_gen; /* Winner generation. */ DB_LSN w_lsn; /* Winner LSN. */ u_int32_t w_tiebreaker; /* Winner tiebreaking value. */ u_int32_t votes; /* Number of votes for this site. */ db_timespec etime; /* Election start timestamp. */ /* Leases. */ db_timeout_t lease_timeout; /* Lease timeout. */ db_timespec lease_duration; /* Lease timeout with clock skew. */ u_int32_t clock_skew; /* Clock skew. */ u_int32_t clock_base; /* Clock scale factor base. */ db_timespec grant_expire; /* Local grant expiration time. */ /* Statistics. */ DB_REP_STAT stat; #if defined(HAVE_REPLICATION_THREADS) && defined(HAVE_STATISTICS) DB_REPMGR_STAT mstat; #endif /* Configuration. */ #define REP_C_2SITE_STRICT 0x00001 /* Don't cheat on elections. */ #define REP_C_BULK 0x00002 /* Bulk transfer. */ #define REP_C_DELAYCLIENT 0x00004 /* Delay client sync-up. */ #define REP_C_LEASE 0x00008 /* Leases configured. */ #define REP_C_NOAUTOINIT 0x00010 /* No auto initialization. */ #define REP_C_NOWAIT 0x00020 /* Immediate error return. */ u_int32_t config; /* Configuration flags. */ #define REP_F_CLIENT 0x00000001 /* Client replica. */ #define REP_F_DELAY 0x00000002 /* Delaying client sync-up. */ #define REP_F_EGENUPDATE 0x00000004 /* Egen updated by ALIVE msg. */ #define REP_F_EPHASE0 0x00000008 /* In phase 0 of election. */ #define REP_F_EPHASE1 0x00000010 /* In phase 1 of election. */ #define REP_F_EPHASE2 0x00000020 /* In phase 2 of election. */ #define REP_F_GROUP_ESTD 0x00000040 /* Rep group is established. */ #define REP_F_INREPELECT 0x00000080 /* Thread in rep_elect. */ #define REP_F_MASTER 0x00000100 /* Master replica. */ #define REP_F_MASTERELECT 0x00000200 /* Master elect. */ #define REP_F_NEWFILE 0x00000400 /* Newfile in progress. */ #define REP_F_NOARCHIVE 0x00000800 /* Rep blocks log_archive. */ #define REP_F_READY_API 0x00001000 /* Need handle_cnt to be 0. */ #define REP_F_READY_APPLY 0x00002000 /* Need apply_th to be 0. */ #define REP_F_READY_MSG 0x00004000 /* Need msg_th to be 0. */ #define REP_F_READY_OP 0x00008000 /* Need op_cnt to be 0. */ #define REP_F_RECOVER_LOG 0x00010000 /* In recovery - log. */ #define REP_F_RECOVER_PAGE 0x00020000 /* In recovery - pages. */ #define REP_F_RECOVER_UPDATE 0x00040000 /* In recovery - files. */ #define REP_F_RECOVER_VERIFY 0x00080000 /* In recovery - verify. */ #define REP_F_SKIPPED_APPLY 0x00100000 /* Skipped applying a record. */ #define REP_F_START_CALLED 0x00200000 /* Rep_start called. */ #define REP_F_TALLY 0x00400000 /* Tallied vote before elect. */ u_int32_t flags; } REP; /* * Recovery flag mask to easily check any/all recovery bits. That is * REP_F_READY_{API|OP} and all REP_F_RECOVER*. This must change if the values * of the flags change. NOTE: We do not include REP_F_READY_MSG in * this mask because it is used frequently in non-recovery related * areas and we want to manipulate it separately (see especially * in __rep_new_master). */ #define REP_F_RECOVER_MASK \ (REP_F_READY_API | REP_F_READY_OP | \ REP_F_RECOVER_LOG | REP_F_RECOVER_PAGE | \ REP_F_RECOVER_UPDATE | REP_F_RECOVER_VERIFY) /* * REP_F_EPHASE0 is not a *real* election phase. It is used for * master leases and allowing the client to find the master or * expire its lease. However, EPHASE0 is cleared by __rep_elect_done. */ #define IN_ELECTION(R) \ F_ISSET((R), REP_F_EPHASE1 | REP_F_EPHASE2) #define IN_ELECTION_TALLY(R) \ F_ISSET((R), REP_F_EPHASE1 | REP_F_EPHASE2 | REP_F_TALLY) #define ELECTION_MAJORITY(n) (((n) / 2) + 1) #define REP_F_INTERNAL_INIT_MASK (REP_F_RECOVER_PAGE | REP_F_RECOVER_LOG) #define IS_REP_MASTER(env) \ (REP_ON(env) && \ F_ISSET(((REP *)(env)->rep_handle->region), REP_F_MASTER)) #define IS_REP_CLIENT(env) \ (REP_ON(env) && \ F_ISSET(((REP *)(env)->rep_handle->region), REP_F_CLIENT)) #define IS_USING_LEASES(env) \ (REP_ON(env) && \ FLD_ISSET(((REP *)(env)->rep_handle->region)->config, \ REP_C_LEASE)) #define IS_CLIENT_PGRECOVER(env) \ (IS_REP_CLIENT(env) && \ F_ISSET(((REP *)(env)->rep_handle->region), REP_F_RECOVER_PAGE)) /* * Macros to figure out if we need to do replication pre/post-amble processing. * Skip for specific DB handles owned by the replication layer, either because * replication is running recovery or because it's a handle entirely owned by * the replication code (replication opens its own databases to track state). */ #define IS_ENV_REPLICATED(env) \ (REP_ON(env) && (env)->rep_handle->region->flags != 0) /* * Gap processing flags. These provide control over the basic * gap processing algorithm for some special cases. */ #define REP_GAP_FORCE 0x001 /* Force a request for a gap. */ #define REP_GAP_REREQUEST 0x002 /* Gap request is a forced rerequest. */ /* REREQUEST is a superset of FORCE. */ /* * Basic pre/post-amble processing. */ #define REPLICATION_WRAP(env, func_call, checklock, ret) do { \ int __rep_check, __t_ret; \ __rep_check = IS_ENV_REPLICATED(env) ? 1 : 0; \ (ret) = __rep_check ? __env_rep_enter(env, checklock) : 0; \ if ((ret) == 0) { \ (ret) = func_call; \ if (__rep_check && (__t_ret = \ __env_db_rep_exit(env)) != 0 && (ret) == 0) \ (ret) = __t_ret; \ } \ } while (0) /* * Per-process replication structure. * * There are 2 mutexes used in replication. * 1. mtx_region - This protects the fields of the rep region above. * 2. mtx_clientdb - This protects the per-process flags, and bookkeeping * database and all of the components that maintain it. Those * components include the following fields in the log region (see log.h): * a. ready_lsn * b. waiting_lsn * c. verify_lsn * d. wait_recs * e. rcvd_recs * f. max_wait_lsn * These fields in the log region are NOT protected by the log region lock at * all. * * Note that the per-process flags should truly be protected by a special * per-process thread mutex, but it is currently set in so isolated a manner * that it didn't make sense to do so and in most case we're already holding * the mtx_clientdb anyway. * * The lock ordering protocol is that mtx_clientdb must be acquired first and * then either REP->mtx_region, or the LOG->mtx_region mutex may be acquired if * necessary. */ struct __db_rep { /* * Shared configuration information -- copied to and maintained in the * shared region as soon as the shared region is created. */ int eid; /* Environment ID. */ u_int32_t gbytes; /* Limit on data sent in single... */ u_int32_t bytes; /* __rep_process_message call. */ db_timespec request_gap; /* Minimum time to wait before we * request a missing log record. */ db_timespec max_gap; /* Maximum time to wait before * requesting a missing log record. */ u_int32_t clock_skew; /* Clock skew factor. */ u_int32_t clock_base; /* Clock skew base. */ u_int32_t config; /* Configuration flags. */ u_int32_t config_nsites; db_timeout_t elect_timeout; /* Normal/full election timeouts. */ db_timeout_t full_elect_timeout; db_timeout_t chkpt_delay; /* Master checkpoint delay. */ u_int32_t my_priority; db_timeout_t lease_timeout; /* Master leases. */ /* * End of shared configuration information. */ int (*send) /* Send function. */ __P((DB_ENV *, const DBT *, const DBT *, const DB_LSN *, int, u_int32_t)); DB *rep_db; /* Bookkeeping database. */ REP *region; /* In memory structure. */ u_int8_t *bulk; /* Shared memory bulk area. */ #define DBREP_OPENFILES 0x0001 /* This handle has opened files. */ u_int32_t flags; /* per-process flags. */ #ifdef HAVE_REPLICATION_THREADS /* * Replication Framework (repmgr) information. */ int nthreads; u_int32_t init_policy; int perm_policy; int peer; /* Site to use for C2C sync. */ db_timeout_t ack_timeout; db_timeout_t election_retry_wait; db_timeout_t connection_retry_wait; db_timeout_t heartbeat_frequency; /* Max period between msgs. */ db_timeout_t heartbeat_monitor_timeout; /* Repmgr's copies of rep stuff. */ int master_eid; u_int32_t generation; /* Thread synchronization. */ REPMGR_RUNNABLE *selector, **messengers, *elect_thread; mgr_mutex_t mutex; cond_var_t queue_nonempty, check_election; #ifdef DB_WIN32 ACK_WAITERS_TABLE *waiters; HANDLE signaler; int wsa_inited; #else pthread_cond_t ack_condition; int read_pipe, write_pipe; int chg_sig_handler; #endif /* Operational stuff. */ REPMGR_SITE *sites; /* Array of known sites. */ u_int site_cnt; /* Array slots in use. */ u_int site_max; /* Total array slots allocated. */ CONNECTION_LIST connections; RETRY_Q_HEADER retries; /* Sites needing connection retry. */ REPMGR_QUEUE *input_queue; socket_t listen_fd; repmgr_netaddr_t my_addr; db_timespec last_bcast; /* Time of last broadcast msg. */ int finished; /* Repmgr threads should shut down. */ int done_one; /* TODO: rename */ int found_master; int takeover_pending; /* We've been elected master. */ /* Operations we can ask election thread to perform (OOB value is 0): */ #define ELECT_ELECTION 1 /* Call for an election. */ #define ELECT_FAILURE_ELECTION 2 /* Do election, adjusting nsites to account for a failed master. */ #define ELECT_REPSTART 3 /* Call rep_start(CLIENT). */ #define ELECT_SEEK_MASTER 4 /* Alternate rep_start to find master. */ int operation_needed; /* Next op for election thread. */ #endif /* HAVE_REPLICATION_THREADS */ }; /* * Control structure flags for replication communication infrastructure. */ /* * Define old DB_LOG_ values that we must support here. For reasons of * compatibility with old versions, these values must be reserved explicitly in * the list of flag values (below) */ #define DB_LOG_PERM_42_44 0x20 #define DB_LOG_RESEND_42_44 0x40 #define REPCTL_INIT_45 0x02 /* Back compatible flag value. */ #define REPCTL_ELECTABLE 0x01 /* Upgraded client is electable. */ #define REPCTL_FLUSH 0x02 /* Record should be flushed. */ #define REPCTL_GROUP_ESTD 0x04 /* Message from site in a group. */ #define REPCTL_INIT 0x08 /* Internal init message. */ #define REPCTL_LEASE 0x10 /* Lease related message.. */ /* * Skip over reserved values 0x20 * and 0x40, as explained above. */ #define REPCTL_LOG_END 0x80 /* Approximate end of group-wide log. */ #define REPCTL_PERM DB_LOG_PERM_42_44 #define REPCTL_RESEND DB_LOG_RESEND_42_44 /* * File info flags for internal init. The per-database (i.e., file) flag * represents the on-disk format of the file, and is conveyed from the master to * the initializing client in the UPDATE message, so that the client can know * how to create the file. The per-page flag is conveyed along with each PAGE * message, describing the format of the page image being transmitted; it is of * course set by the site serving the PAGE_REQ. The serving site gets the page * image from its own mpool, and thus the page is in the native format of the * serving site. This format may be different (i.e., opposite) from the on-disk * format, and in fact can vary per-page, since with client-to-client sync it is * possible for various different sites to serve the various PAGE_REQ requests. */ #define REPINFO_DB_LITTLEENDIAN 0x0001 /* File is little-endian lorder. */ #define REPINFO_PG_LITTLEENDIAN 0x0002 /* Page is little-endian lorder. */ /* * Control message format for 4.6 release. The db_timespec_t is * not a portable structure. Therefore, in 4.6, replication among * mixed OSs such as Linux and Windows, which have different time_t * sizes, does not work. */ typedef struct { u_int32_t rep_version; /* Replication version number. */ u_int32_t log_version; /* Log version number. */ DB_LSN lsn; /* Log sequence number. */ u_int32_t rectype; /* Message type. */ u_int32_t gen; /* Generation number. */ db_timespec msg_time; /* Timestamp seconds for leases. */ u_int32_t flags; /* log_put flag value. */ } REP_46_CONTROL; /* * Control message format for 4.5 release and earlier. */ typedef struct { u_int32_t rep_version; /* Replication version number. */ u_int32_t log_version; /* Log version number. */ DB_LSN lsn; /* Log sequence number. */ u_int32_t rectype; /* Message type. */ u_int32_t gen; /* Generation number. */ u_int32_t flags; /* log_put flag value. */ } REP_OLD_CONTROL; #define LEASE_REFRESH_TRIES 3 /* Number of times to try refresh. */ /* Master granted lease information. */ typedef struct __rep_lease_entry { int eid; /* EID of client grantor. */ db_timespec start_time; /* Start time clients echo back. */ db_timespec end_time; /* Master lease expiration time. */ DB_LSN lease_lsn; /* Durable LSN lease applies to. */ } REP_LEASE_ENTRY; /* * Old vote info where some fields were not fixed size. */ typedef struct { u_int32_t egen; /* Election generation. */ int nsites; /* Number of sites I've been in * communication with. */ int nvotes; /* Number of votes needed to win. */ int priority; /* My site's priority. */ u_int32_t tiebreaker; /* Tie-breaking quasi-random value. */ } REP_OLD_VOTE_INFO; typedef struct { u_int32_t egen; /* Voter's election generation. */ int eid; /* Voter's ID. */ } REP_VTALLY; /* * The REP_THROTTLE_ONLY flag is used to do throttle processing only. * If set, it will only allow sending the REP_*_MORE message, but not * the normal, non-throttled message. It is used to support throttling * with bulk transfer. */ /* Flags for __rep_send_throttle. */ #define REP_THROTTLE_ONLY 0x0001 /* Send _MORE message only. */ /* Throttled message processing information. */ typedef struct { DB_LSN lsn; /* LSN of this record. */ DBT *data_dbt; /* DBT of this record. */ u_int32_t gbytes; /* This call's max gbytes sent. */ u_int32_t bytes; /* This call's max bytes sent. */ u_int32_t type; /* Record type. */ } REP_THROTTLE; /* Bulk processing information. */ /* * !!! * We use a uintptr_t for the offset. We'd really like to use a ptrdiff_t * since that really is what it is. But ptrdiff_t is not portable and * doesn't exist everywhere. */ typedef struct { u_int8_t *addr; /* Address of bulk buffer. */ uintptr_t *offp; /* Ptr to current offset into buffer. */ u_int32_t len; /* Bulk buffer length. */ u_int32_t type; /* Item type in buffer (log, page). */ DB_LSN lsn; /* First LSN in buffer. */ int eid; /* ID of potential recipients. */ #define BULK_XMIT 0x001 /* Buffer in transit. */ u_int32_t *flagsp; /* Buffer flags. */ } REP_BULK; /* * This structure takes care of representing a transaction. * It holds all the records, sorted by page number so that * we can obtain locks and apply updates in a deadlock free * order. */ typedef struct { u_int nlsns; u_int nalloc; DB_LSN *array; } LSN_COLLECTION; /* * This is used by the page-prep routines to do the lock_vec call to * apply the updates for a single transaction or a collection of * transactions. */ typedef struct { int n; DB_LOCKREQ *reqs; DBT *objs; } linfo_t; #if defined(__cplusplus) } #endif #include "dbinc_auto/rep_ext.h" #endif /* !_DB_REP_H_ */